You time travel 100 years into the future and learn that several new elements have been discovered, as pictured. These elements are frequently found as oxides, and need to be separated in order to extract the pure element. Before going through this effort, it is useful to know what amount of the element can be extracted. What is the mass percent composition of element T in the compound T6O5?
Answers
We obtain the mass percent of the element T as 96.5%.
What is the mass percentage?We know that the mass percent actually has to do with the mass of the object that we could have in a compound expressed as a percentage. Note that we are told that most of the new elements that were discovered do exist as oxides this implies that they are binary compounds of the element that is involved and oxygen.
Now we have to look at the section of the table that have been given in the question so as to be able to obtain the the mass percent of the element as we have it. We can see as it has been written in the table that the atomic mass of the element T is found to be 362.31.
We would now have;
Molar mass of the compound = 6(362.31) + 5(16)
= 2173.86 + 80
= 2253.86
Mass percent composition of element T = 6(362.31)/2253.86 * 100/1
= 96.5%
Learn more about mass percent:https://brainly.com/question/5394922
#SPJ1
Related Questions
An element is a substance formed of
Answers
Answer:
the same kind of atoms
Explanation:
the same kind of atoms
How much NaOH (in moles) must be added to 1 L of a buffer solution that is 1.8 M in acetic acid and 1.2 M in sodium acetate to result in a buffer solution of ph 5.22? Assume volume to remain constant.
Answers
C
A
=
1.8
M
The initial molar concentration of sodium acetate in the buffer solution:
C
S
=
1.2
M
The volume of the buffer solution:
V
=
1
L
The final pH of the resulting solution:
x
=
5.22
At a certain temperature, the solubility of aluminum hydroxide is (8.70x10^-13) M. What is the Ksp at this temperature?
Answers
The solubility product (Ksp) at the given temperature is 2.27×10⁻²⁴
How do I determine the solubility product (Ksp)?We'll begin by writing the dissociation equation of aluminum hydroxide, Al(OH)₃. This is shown below:
Al(OH)₃(aq) <==> Al³⁺(aq) + 3OH⁻(aq)
Finally, we shall determine the solubility product (Ksp). This is illustarted below:
Concentration of Al(OH)₃ = 8.70×10⁻¹³ MConcentration of Al³⁺ = 8.70×10⁻¹³ MConcentration of OH⁻ = 3 × 8.70×10⁻¹³ = 2.61×10⁻¹² MSolubility product (Ksp) =?Ksp = [Al³⁺] × [OH⁻]
Ksp = 8.70×10⁻¹³ × 2.61×10⁻¹²
Ksp = 2.27×10⁻²⁴
Thus, we can coonclude that the solubility product (Ksp) is 2.27×10⁻²⁴
Learn more about solubility of product:
https://brainly.com/question/4530083
#SPJ1
iupac name
answerrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrr
Answers
Answers answer questions and
What mass of each reactant would be needed to produce 100.0 kg of methanol in CO + H2 = CH3OH
Answers
87420 g CO and 12580 g H2 mass would be needed to produce 100.0 kg of methanol in CO + H2 = CH3OH.
The atomic mass of an element refers to the mass of the constituents that make up its atom. A multiple of 1.992646547 1023 gram, or more specifically, 1.992646547 gram, is used to denote one-twelfth of the mass of the carbon-12 atom, which has an ascribed atomic mass of 12 units. On this scale, one atomic mass unit is equal to 1.660539040 1024 grammes (amu). In honour of English physicist John Dalton, the atomic mass unit is occasionally called the dalton (Da).
To know more about mass visit : brainly.com/question/5661976
#SPJ1
The gas tank of car hold 22.3 gallons.If the density of gasoline is 0.8206g/mL,determine the massin kilograms and pounds of the fuelin a full truck
Answers
Density = mass/Volume or D = m/V
Given: V = 22.3 gal
D = 0.8206 g/mL
1) Rearrange the equation to solve for m
2) Find conversion factor(s) and convert V from gal to mL (by dimensional analysis) so the units cancel
3) Solve for m in g
4) Find conversion factor(s) and convert m from g → lbs
1) D = m/V rearranges to m = D ∗ V
2) 1 gal = 3.785 L and 1 L = 1000 mL; 22.3 gal ∗ 3.785 L/1 gal ∗ 1000 mL/1 L = 84 406 mL
3) m = 0.8206 g/mL ∗ 84 406 mL = 69 260 g
4) 1 lb = 453.6 g; 69 260 g ∗ 1 lb/453.6 g = 153 lbs
Learn More about Density:
https://brainly.com/question/24386693
Can a chain reaction occur with only one radioactive nucleus? Explain why or why not
Answers
Yes, a chain reaction can only be carried out using just one atom.
What is a chain reaction?We know that a chain reaction has to do with the type of reaction in which there is a a continuous self sustaining reaction. In this kind of reaction, there is one radioactive material that is bombarded by a particle such as a neutron. The bombardment of the particle would make the a cycle of reactions to begin which is able to sustain itself.
Given the fact that we only need to have a single radioactive atom that is bombarded for the process of radioactivity to occur tell us that it is a process that requires just one atom.
Take for instance, all we need is one Uranium fuel that would be bombarded with neutrons in order to have a chain reaction that involves uranium.
Learn more about chain reaction:https://brainly.com/question/12814600
#SPJ1
how to balance by hit and trial method reaction
zn + Hcl - Zncl2 + Hcl
Answers
The balanced equation by hit and trial method is:
Zn + 2HCl → ZnCl2 + H2
Because a metal is replaced by another metal, the interaction between hydrochloric acid and zinc produces a single-displacement reaction.
This can be shown by,
B + CD → BD + C
There are two requirements: either B and D must be different metals (or any element that may form a cation, such as a hydrogen), while C must be an anion, or B and D must be halogens, while C must be a cation.
Count the Zn, Cl, and H atoms on each side of the chemical equation to balance the HCl-Zn reaction equation. To balance the equation, just alter the coefficients or the numbers that come before the atoms or compounds. The equation appears as follows after the coefficients have been changed:
ZnCl2 + H2 → Zn + 2HCl
Balance the molecular equation first.
Zn + 2HCl → ZnCl2 + H2
The net ionic equation will be, once the number of ions on both sides of the reaction is equalized by crossing them out.
Zn + 2H+ + 2 Cl– → Zn2+ + 2Cl– + H2
The balanced equation will be,
Zn + 2HCl → ZnCl2 + H2
Learn more about balanced equations here:
https://brainly.com/question/2399130
#SPJ9
Identify what element is reduced and what element is oxidized in the following reaction. Pb + 2l2 Pbl4
Answers
Lead (Pb )is oxidised and Iodine(I) reduction in the given reaction.
What is oxidation and reduction of elements?
An increase in an element's oxidation state or the loss of electrons is referred to as oxidation.
Gaining electrons or lowering an atom's oxidation state are both considered to be reductions in the context of chemical reactions.
Pb + 2l2 gives Pbl4
The oxidation number of lead in non bonded form is zero. In PbI4 oxidation number of lead is + 4.There is an increase in the oxidation number. The oxidation number of iodine in free state is zero. Whereas in P I4 oxidation number iodine is -1, there is a decrease in oxidation number.
Hence, lead (Pb )is oxidised and iodine(I) is reduced in the given reaction.
To know more about oxidation number from the given link
https://brainly.com/question/27239694
#SPJ1
In the given balanced redox reaction, Pb is oxidised and I is reduced.
What are redox reactions?
A redox reaction is one in which electrons are transferred between different chemical species (the atoms, ions, or molecules involved in the reaction).Some species go through oxidation, which is the loss of electrons, while others go through reduction, which is the gain of electrons, during a redox process.From the given balanced redox reaction
Pb + 2 Cl₂ ⇄ PbCl₄
We can identify and write balanced half-reactions describing the oxidation and reduction that happen in this reaction.
Oxidation: Pb → Pb⁴⁺ + 4 e⁻
Reduction: 2 I₂ + 4 e⁻ → 4 I⁻
From the half reactions it is determined that Pb is oxidized and its oxidation number increases from 0 to 4+ while I₂ is reduced and its oxidation number decreases from 0 to 1-.
For more informations on redox reactions follow
https://brainly.com/question/21851295
#SPJ1
If an atom has 5 valance electrons, it will need to
gain 3
gain 8
gain 0
lose 4
electron(s) in order to become stable?
Answers
Answer: gain 3
Explanation:
elements want to have a total of 8 valence electrons to become stable like the noble gases! Hope this Helps.
This process combines the analytical techniques of both the mass spectrometer
and the gas chromatograph to separate chemical components of a sample
mixture, detect their presence or absence and then identify the compound.
Answers
Gas chromatography-mass spectrometry (GC-MS) is an analytical method that combines both the mass spectrometer and the gas chromatograph to separate the chemical components of a sample mixture to detect the presence and then identify the compound.
What is Gas chromatography-mass spectrometry?Gas chromatography-mass spectrometry (GC-MS) can be described as an analytical method that combines the characteristics of gas chromatography and mass spectrometry to identify various substances within a test sample.
Applications of GC-MS include fire investigation, drug detection, environmental analysis, and identification of unknown samples, including that material samples.
The GC-MS is made of two major blocks: the gas chromatograph and the mass spectrometer. The gas chromatograph uses a capillary column whose features regarding molecule separation depend on the column's dimensions as well as the phase properties.
Learn more about gas chromatography, here:
https://brainly.com/question/424527
#SPJ1
Sodium combines with water to produce sodium hydroxide and hydrogen gas.
Which word equation represents this
violent reaction?
O sodium hydroxide + water _, sodium + hydrogen
O sodium + water + - sodium hydroxide + hydrogen
O sodium + hydrogen - sodium hydroxide + water
• sodium + sodium hydroxide - water + hydrogen
Answers
sodium + water + - sodium hydroxide + hydrogen is the word equation to produce sodium hydroxide and hydrogen gas.
Option B is correct.
Is the chemical change that occurs when water and sodium combine to generate sodium hydroxide and hydrogen gas?A colorless solution of sodium hydroxide (NaOH) and hydrogen gas is created when sodium metal interacts quickly with water (H2).It is an exothermic process.
What happens chemically when water and sodium hydroxide are combined?Na+ and OH- ions result from the reaction NaOH and H2O. Heat will be released because the process is exothermic. Since sodium hydroxide is regarded as a strong base, it can completely and entirely dissociate in aqueous solution.
To know more about reaction visit:-
https://brainly.com/question/28984750
#SPJ1
Answer: calcium
Explanation:
What is a spontaneous reaction?
OA. A reaction with a high activation energy
OB. A reaction that occurs without the addition of energy
OC. A reaction with a low activation energy
OD. A reaction that requires an input of energy to occur
Answers
Spontaneous reaction is a reaction that occurs without the addition of energy
There are two types of reactions in thermodynamics:
Endothermic reactions -
They are chemical reactions in which the reactants absorb heat energy from the surroundings to form products.Endothermic reactions are typically non- spontaneous reactionsThey generally involve the formation of chemical bonds through the absorption of heat from the surroundings.Exothermic reactions -
An Exothermic reaction is a chemical reaction that involves release of energy in the form of heat or light.Exothermic reactions are spontaneous at room temperatureThey involve the release of heat energy generated from bond-breakageThus we can conclude that spontaneous reaction is a reaction that occurs without the addition of energy
Learn more about exothermic reactions at https://brainly.com/question/24808802
#SPJ13
What is the balanced equation for this reaction, which takes place in a basic solution?
Cr(OH)3(s) + ClO3–(aq) → CrO42 (aq) + Cl–(aq)
Cr(OH)3(s) + 2ClO3–(aq) + 6OH–(aq) → 3CrO42–(aq) + 2Cl–(aq) + 2H2O(l)
Cr(OH)3(s) + 2ClO3–(aq) + 4OH–(aq) → 2CrO42–(aq) + Cl–(aq) + 3H2O(l)
2Cr(OH)3(s) + ClO3–(aq) + 4OH–(aq) → 2CrO42–(aq) + Cl–(aq) + 5H2O(l)
2Cr(OH)3(s) + 2ClO3–(aq) + 6OH–(aq) → 2CrO42–(aq) + 2Cl–(aq) + 7H2O(l)
Answers
The balanced equation for the redox reaction, which takes place in a basic solution is:
2 Cr(OH)₃ + ClO₃⁻ (aq) + 4 OH⁻ → 2 CrO₄²⁻ (aq) + Cl⁻ (aq) + 5 H₂O; option CWhat is the balanced equation for the redox reaction?A balanced equation for a redox reaction is one in which the electrons transferred are balanced and the atoms involved in the reaction are also balanced.
To balance redox reactions in a basic solution, OH⁻ ions and H₂O are placed on appropriate sides of the reaction.
Considering the given reaction:
Cr(OH)₃ + ClO₃⁻ (aq) → CrO₄²⁻ (aq) + Cl⁻ (aq):
The balanced equation will be:
2 Cr(OH)₃ + ClO₃⁻ (aq) + 4 OH⁻ → 2 CrO₄²⁻ (aq) + Cl⁻ (aq) + 5 H₂O
The electrons transferred and the atoms involved are balanced.
Learn more about redox reactions at: https://brainly.com/question/21851295
#SPJ1
why were gold and copper the first forms of matter investigated by humans??
Answers
Gold and copper were the first forms of matter investigated by humans because they were pretty and have a shiny appearance.
Gold and copper have a shiny face and they were used in the production of ornaments and jewelry. Along with jewelry many other precious items were made from gold and copper. Gold and copper were so valuable forms of matter and they are also economically used by many countries. Gold was mostly used in making of ornaments and copper was used in making of frames.
In today's modern world mainly gold is one of the most precious element which is obtained for economical use.
Learn more about gold and copper from the link given below.
https://brainly.com/question/23500830
#SPJ1
The Oxidation number of fe in K4 [Fe(CN)₂]
Answers
K₄ [Fe (CN)₂] is a coordination compound where the oxidation number of Fe is -2. But the negative charge for metal iron is not possible and the actual formula is K₄ [Fe (CN)₆] .
What is coordination compound?A coordination compound is a complex where an ionic or neutral ligand is coordinated to a metal. The oxidation state of the metal is called the primary valence of the complex.
Here, there are 4 potassium outside the coordination sphere and thus +4 charge is outside hence -4 charge have to be inside to neutralize the compound. The charge of one CN is -1. Thus -2 for two CN.
Total charge is -4 and that of 2CN is -2, thus charge of Fe is -4-(-2) = -2.
Actually this compound do not exists. The correct coordination formula is K₄ [Fe (CN)₆] where Fe is +2 oxidation state.
To find more on K₄ [Fe (CN)₆], refer here:
https://brainly.com/question/13655705
#SPJ1
gravity sample work connection’s academy
PLEASE HELP AS SOON AS POSSIBLE WILL MARK BRAINIEST
Answers
Answer:
search on YT Khan academy work done by gravity
Explanation:
you will get it for sure with best explanation
mark me please on brainlest
True or False: A magnetic field and an electromagnetic field create the same results with the metal.
Answers
Hello!
Answer:
True :P
Consider a heat engine that uses reservoirs at 800°C and 0°C.
(a) Calculate the maximum possible efficiency.
(b) If Qh is 1000 J, find the maximum value of -w and the minimum value of -Qc. R = 8,314 J/mol. K
Answers
The maximum possible efficiency of the heat engine that uses reservoirs at 800°C and 0°C is 74%.
Maximum efficiency is mainly calculated for heat engines.
Let the starting temperature be T1 and the 2nd temperature is T2.
Since the given temperatures are in Celcius form, we have to first convert the temperatures into Kelvin form for proper calculation of maximum efficiency.
So, T1 = 0 + 273 = 273 K
T2 = 800 + 273 = 1073 K
We know,
Maximum efficiency = (T2- T1)/T2
= (1073 - 273) / 1073
= 800 / 1073
= 0.74
= 74 %
Therefore, the maximum efficiency of the heat engine will be 74%.
To learn more about heat engines:
https://brainly.com/question/15735984
Compare the properties of solids, liquids, and gases in terms of the kinetic molecular theory.
Answers
Please Help Me I don't Understand It.
Answers
Answer:
Javier's model is better, as the ball-and-stick model shows distinct differences in bond, whereas Carlos' model just shows them as differently colored circles.
Why might a chemist add a buffer to a solution?
The buffer can keep the pH stable when small amounts of acid or base are added.
The buffer can magnify the changes to pH caused by adding small amounts of acid or base.
The buffer changes color to indicate the pH of the solution.
The buffer reacts with the acid or base in solution to form a useful product.
Answers
A chemist adds a buffer to a solution because the buffer can keep the pH stable when small amounts of acid or base are added. Thus, Option A is correct.
Buffer is a solution that resists the change in pH when acid or alkali is added in a small amount. Buffer is made up of weak acid and its conjugate base or a weak base and its conjugate acid. It absorbs H+ and OH- ions when strong acid or alkali is added so that the pH remains the same and neutralizes the added acid or alkali. While maintaining the pH of the solution, the pH of the buffer changes in a small amount.
Thus, a chemist adds a buffer to a solution to keep the pH constant when strong acid or base is added.
To learn more about buffers,
brainly.com/question/22821585
Calculate the molar it’s of a phosphoric acid solution if 34.21mL of 0.0431M sodium hydroxide neutralizes 25.00mL of the acid solution
Answers
According to the concept of molar concentration, the molarity of phosphoric acid solution is 0.0589 M.
What is molar concentration?Molar concentration is defined as a measure by which concentration of chemical substances present in a solution are determined. It is defined in particular reference to solute concentration in a solution . Most commonly used unit for molar concentration is moles/liter.
The molar concentration depends on change in volume of the solution which is mainly due to thermal expansion. Molar concentration is calculated by the formula, molar concentration=mass/ molar mass ×1/volume of solution in liters.
In terms of moles, it's formula is given as molar concentration= number of moles /volume of solution in liters.In case where two solutions are given, molarity of one solution is obtained as, M₁V₁=M₂V₂
Substitution in above formula gives, 0.0431×34.21/25=0.0589 M.
Thus the molarity of phosphoric acid is 0.0589 M.
Learn more about molar concentration ,here:
https://brainly.com/question/21841645
#SPJ1
Without using the periodic table, determine the group, period, and block of an atom with the following electron configurations a. [ne]3s^2
Answers
The element is in 2nd group, 3rd period and s block.
How to check the group, period and block of the elements by looking at the electronic configuration?
The total number of valence electron gives us the group, the total number of shells gives us the period and the shell which the valence electron is entering tells us about the block it belongs to.
In [Ne]3s2, the valence electron is 2, the number of shells is 3 that is 1,2 and 3. the valence electron is entering the the s subshell.
Therefore, in [Ne]3s2, the group is 2nd, the period is 3 and it belongs to s block.
To learn more about the elements in the periodic table from the given link https://brainly.com/question/25916838
#SPJ13
What is the mass of an object that has a density of 2.2 g/ml and a volume of 6.0 mL
Answers
Explain the process of distillation with the help
of an
example.
Answers
Answer:
Distillation is the process of obtaining a liquid from a mixture containing a dissolved solute. The mixture is heated at a temperature just before the boiling point of the liquid. It evaporates and the vapor travels into a condenser flushed with cold water along the outside. The vapor loses its heat energy and cools into a liquid state. It then falls into a beaker on the other end as a distillate.
An example is desalination, where water is removed from seawater.
mark as brainliest
Addison warms a pure solid substance in a system closed off from the surroundings
Answers
This experiment shows that the elements of pure solid substance in a system closed off from the surroundings has increased temperature very fast.
What is a pure solid substance?Pure substances are substances that are built up of only one kind of particle and have a fixed or abiding structure. Pure substances are further confidential as elements and compounds. An element is a substance that comprises only one type or kind of atom. a pure substance has a constant chemical composition.
No affair where you sample a substance, it is the same. For chemistry, the safest examples of pure substances are elements and compounds. So, examples cover gold, silver, helium, sodium chloride, and pure water.
So we can conclude that In chemistry, a pure substance is an element or compound made up of one type of particle.
Learn more about pure substance here: https://brainly.com/question/18634105
#SPJ1
Why is NaCl called sodium chloride but CO is ca bin monoxide
Answers
Answer:
Sodium Chloride is a chemical compound that has a chemical formula NaCl.
NaCl is not taken into account as a molecule.
A molecule is the smallest particle in a chemical element or compound that contains that element's or substance's chemical properties.
Molecules are made up of atoms that are chemically bound together.
Covalent Bonding is a term that refers to the bonding of two or more Ionic compounds, such as sodium chloride (NaCl), which is created by transferring electrons that form ions.
Ions create ionic bonds by exerting electrostatic force on one another.
In a water molecule, on the other hand, the hydrogen and oxygen atoms are joined by swapping electrons rather than transferring them.
Use the equation GPE = mx 9.8 m/s xh to calculate the gravitational potential of a 10-kg
sack of groceries on a shelf 1 m above the floor?
Answers
A 10-kg bag of goods on a shelf one meter above the ground has a gravitational potential of GPE= (10 kg)(9.8 m/s2) (1 m) GPE= 98
GRAVITATIONAL POTENTIAL: the energy possessed or acquired by an object due to a change in its position when it is present in a gravitational field. In simple terms, it can be said that gravitational potential energy is an energy that is related to gravitational force or to gravity
To know more about Gravitational Potential visit:
https://brainly.com/question/29352908
#SPJ1
what mass of iron(III) oxide must be used to produce 10.6g iron?
Answers
The mass of iron (II) oxide that must be used to produce 10.6 g of iron would be 14.37 grams.
Stoichiometric problemIron is produced from iron (II) oxide by reacting with carbon monoxide according to the following equation:
[tex]Fe_2O_3 + 3CO -- > 2Fe + 3CO_2[/tex]
The equation already obeys the law of conservation of atoms. Hence. it is a balanced equation.
The mole ratio of iron (III) oxide that reacts and the iron that is produced according to the equation is 1:2.
Now, in a particular reaction involving iron (III) oxide and carbon monoxide, 10.6 grams of iron were produced. The amount of iron (III) oxide used can be obtained using the mole ratio from the balanced equation of the reaction.
Recall that: mole = mass/molar mass
Molar weight of iron = 56 g/mol
Mole of 10.6 g of iron = 10.6/56
= 0.19 moles
Since the mole ratio is 1:2, the equivalent mole of iron (III) oxide that reacts can be obtained:
0.19/2 = 0.09 moles
Molar mass of iron (III) oxide = 159.69 g/mol
Mass of 0.09 mol iron (III) oxide = 0.09 x 159.69
= 14.37 grams
Thus, the amount of iron (III) oxide that must be used to produce 10.6 g of iron would be 14.37 grams.
More on stoichiometric problems can be found here: https://brainly.com/question/28297916
#SPJ1