you want to obtain a sample to estimate a population mean. based on previous evidence, you believe the population standard deviation is approximately . you would like to be 90% confident that your estimate is within 2.5 of the true population mean. how large of a sample size is required? n

The position of point S after dilating will be half of the original. The dilated point S' has been shown below.

What is dilation?

Using a modification known as dilation, an object can be resized. Through dilatation, the objects can be resized or enlarged. This transformation results in a shape that is a perfect replica of the original image. The form's dimensions do vary, though. An expansion or contraction of the original form is required for a dilatation. This shift is referred to as a scale factor.

We are given a graph showing position of point S.

Now, on dilating the point by a scale factor of [tex]\frac{1}{2}[/tex], we get that the point will be located at half of the original.

The point has been located and attached in the image below.

Hence, the required solution has been obtained.

Learn more about dilation from the given link

https://brainly.com/question/30240987

#SPJ1

The decimal which is less than 0. 8 and greater than 0. 02 is 0. 46 (option B).

To answer this question, we need to understand how decimals work. A decimal is a number that represents a value less than one, and it is denoted by a dot or a period. The digits that come after the dot represent the number of tenths, hundredths, thousandths, etc., depending on the place value of the digit.

Now, let's consider the given options: 0.81, 0.46, 0.86, and 0.6. We need to find the decimal that lies between 0.8 and 0.02.

We can eliminate option D, 0.6, as it is less than 0.8. Similarly, we can eliminate option A, 0.81, as it is greater than 0.8.

To choose between options B, 0.46, and C, 0.86, we need to compare them with the given values, 0.8 and 0.02. We can see that 0.46 is less than 0.8 but greater than 0.02.

Therefore, the answer is option B, 0.46.

To know more about decimal here

https://brainly.com/question/9543292

#SPJ4

The lower and upper control limits that the manufacturer should use in the resulting control chart are LCL = 0.023,UCL = 0.043

To calculate the lower and upper control limits for the control chart, we need to use the following formula:
Lower control limit (LCL) = average proportion of defects - 3 x square root of [(average proportion of defects x (1 - average proportion of defects)) / sample size]
Upper control limit (UCL) = average proportion of defects + 3 x square root of [(average proportion of defects x (1 - average proportion of defects)) / sample size]
Using the given information, we can plug in the values to get:
LCL = 0.01 - 3 x square root of [(0.01 x 0.99) / 30] = -0.023
UCL = 0.01 + 3 x square root of [(0.01 x 0.99) / 30] = 0.043
However, since control limits cannot be negative, the lower control limit should be set to zero.

Learn more about Lower control limit here:

https://brainly.com/question/29578908

#SPJ11

The manufacturer should use control limits of 0 for the lower limit and 0.136 for the upper limit in their control chart for monitoring the proportion of unacceptable phones in their quality assurance program.

Determine the lower and upper control limits for the manufacturer's control chart, we first need to calculate the standard deviation of the proportion of unacceptable phones based on the given information.
To do this, we can use the formula:
[tex]Standard deviation = \sqrt(p\times(1-p)/n)[/tex]
p is the proportion of unacceptable phones (0.01), and n is the sample size (30 phones per day for 7 days = 210 total phones).
Plugging in these values, we get:
[tex]Standard deviation = \sqrt(0.01\times(1-0.01)/210) = 0.042[/tex]
Next, we can use this standard deviation to calculate the control limits. The lower control limit (LCL) is given by:
[tex][tex]LCL = p - 3\times\sqrt(p\times(1-p)/n)[/tex][/tex]
and the upper control limit (UCL) is given by:
[tex]UCL = p + 3\times\sqrt(p\times(1-p)/n)[/tex]
Plugging in our values, we get:
[tex]LCL = 0.01 - 3\times0.042 = -0.075[/tex]
[tex]UCL = 0.01 + 3\times0.042 = 0.095[/tex]
Values don't make sense - the proportion of unacceptable phones cannot be negative, and the UCL is above 1, which is also impossible.
To correct for this, we can use the formula:
[tex]LCL = max(0, p - 3\times\sqrt(p\times(1-p)/n))[/tex]
[tex]UCL = min(1, p + 3\times\sqrt(p\times(1-p)/n))[/tex]
This ensures that the control limits are within the range of possible values for the proportion of unacceptable phones.
Plugging in our values with this formula, we get:
[tex]LCL = max(0, 0.01 - 3\times0.042) = 0[/tex]
[tex]UCL = min(1, 0.01 + 3\times0.042) = 0.136[/tex]

For similar questions on control limit

https://brainly.com/question/29512700

#SPJ11

The solution is all values of x greater than -9.

The correct graph for the given inequality "Negative 3x - 7 < 20" is:

From negative 10 to positive 10, a number line runs. An open circle shows up at negative 9. From negative 9 to positive 10, the number line is shaded.

To chart the arrangement, we initially confine the variable by adding 7 to the two sides of the imbalance:

Negative 3x - 7 + 7 < 20 + 7

Negative 3x < 27

Next, we divide both sides by -3, remembering to flip the inequality sign since we're dividing by a negative number:

Negative 3x/-3 > 27/-3

x > -9

Therefore, the arrangement is all upsides of x more prominent than - 9. Since these are the values that satisfy the inequality, we graph this by drawing an open circle at -9 on the number line and shading all values to the right of -9.

know more about inequality visit:

https://brainly.com/question/30231190

#SPJ1

The red line on the graph may also include other lines that represent related data, such as the total amount of solid waste generated by all people in the United States per year, or the period of time in years being measured.

Red line on the graph represents the average amount of solid waste generated by each person in the United States per year.

The red line on the graph is a useful tool for understanding the impact of solid waste on the environment and society as a whole.

It helps us to identify areas where we can make changes to reduce waste and improve our overall environmental performance and serves as a reminder of the importance of responsible consumption and waste management practices.

Red line on the graph represents the average amount of solid waste generated by each person in the United States per year.

This is a key metric in measuring the environmental impact of waste production in the country.
The average amount of solid waste generated per person is an important figure because it provides a more accurate picture of individual behavior and consumption patterns.

It takes into account factors such as population growth, changes in household size, and shifts in lifestyle and consumption habits.

By tracking this metric over time, policymakers and environmental advocates can gain insight into trends and patterns in waste generation and identify opportunities for reducing waste and promoting sustainability.

For similar questions on Graph

https://brainly.com/question/19040584

#SPJ11

the value of the car decreases by 15 percent each year. This means that the value of the car decreases to 85% of its previous year's value every year.

what do you mean by term  decreases  ?

In this context, "decreases" means that the value of the car is getting smaller over time. The term "decrease" is often used in mathematics to describe a decrease in the numerical value of a quantity. In this case, the value of the car is decreasing by 15% each year, which means that its value is getting smaller by 15% of the previous year's value.

In the given question,

The given function for the value of the car is:

v(t) = P(0.85)ⁿ

Here, P is the initial purchase price of the car, and t is the time in years since the car was purchased.

To find the percent that the value of the car decreases by each year, we need to find the ratio of the decrease in value to the initial value, and express it as a percentage.

Let's consider the value of the car after one year, i.e., when t=1. The value of the car after one year is:

v(1) = P(0.85)¹ = 0.85P

The decrease in value from the initial value P is:

P - v(1) = P - 0.85P = 0.15P

Therefore, the ratio of the decrease in value to the initial value is:

(0.15P/P) = 0.15

To express this ratio as a percentage, we multiply by 100, which gives:

0.15 x 100% = 15%

Therefore, the value of the car decreases by 15% each year. This means that the value of the car decreases to 85% of its previous year's value every year.

To know more about percent , visit:

https://brainly.com/question/28670903

#SPJ1

The value of arc PQ is 110°

The circumference of a circle is the length of the 360 degree arc of that circle. Therefore the sum of the arc on a circumference of a circle is 360°

Therefore ,

8x-10+ 6x + 10x+10 = 360

24x -10+10 = 360

24x = 360

divide both sides by 24

x = 360/24

x = 15

therefore the value of x is 15

Arc PQ = 8x -10

substitute 15 for x

ArcPQ = 8×15-10

= 120-10

= 110°

therefore the value of arc PQ is 110°

learn more about circumference from

https://brainly.com/question/29644055

#SPJ1

Answer:

the angle of depression is approx 22 degrees

Step-by-step explanation:

Model drawn below to visualize

I represented the angle of depression as x

Since two side lengths are given, we can use tangent to find the angle of depression

tan x= 3/7.5

We then use inverse tangent to find the angle measure:

m<x=[tex]tan^{-1}[/tex](3/7.5)

m<x is approx 21.8 or 22 when rounded to the nearest degree

(when using tan, inverse tan, sin, cos, inv... use deg on calculator when finding angle of depression, solving triangles, etc.)

The principal advantage of the Dodge-Romig tables is their simplicity. Therefore, the correct answer is D. simplicity.

The Dodge-Romig tables are statistical sampling tables used in quality control to determine the acceptance or rejection

of a production lot based on sample size and the number of defects found in the sample.

The principal advantage of the Dodge-Romig tables is their simplicity.

They provide a quick and easy method for determining the acceptability of a production lot, without the need for

extensive calculations or statistical knowledge.

This means that they can be used by personnel with limited training in quality control.

The principal advantage of the Dodge-Romig tables is their simplicity. While they can be used for receiving inspection,

their main benefit is in minimizing inspection time and effort by providing clear guidelines for lot sampling and

acceptance based on size and level of defects.

Additionally, their use can facilitate smaller lot sizes and more efficient quality control processes.

for such more question on simplicity

https://brainly.com/question/30668373

#SPJ11

The slope of the line in the reduced form is 4 / 7.

The slope of a line is the change in the dependent variable with respect to the change in the independent variable.

Therefore,

slope = m = change in y / change in x

slope = m = y₂ - y₁ / x₂ - x₁

P = (2, 3)

Q = (9, 7)

x₁ = 2

x₂ = 9

y₁ = 3

y₂ = 7

Therefore,

slope = 7 - 3 / 9 - 2

slope = 4 / 7

learn more on slope here: https://brainly.com/question/26578510

#SPJ1

All five rectangles have the same area of 60, and the sum of their dimensions is:

2 + 30 + 4 + 15 + 6 + 10 + 8 + 7.5 + 10

Let the width of rectangle 1 be w1, the width of rectangle 2 be w2, and so on. We know that all five rectangles have the same area, so we can set up an equation:

[tex]w1 * l1 = w2 * l2 = w3 * l3 = w4 * l4 = w5 * l5[/tex]

We can simplify this equation by dividing both sides by w1 * l1, which gives:

[tex]1 = (w2 * l2) / (w1 * l1) = (w3 * l3) / (w1 * l1) = (w4 * l4) / (w1 * l1) = (w5 * l5) / (w1 * l1)[/tex]

Let's define a new variable x = w2 * l2 = w3 * l3 = w4 * l4 = w5 * l5. Then we have:

[tex]w1 * l1 = xw2 * l2 = xw3 * l3 = xw4 * l4 = xw5 * l5 = x[/tex]

Now we need to find the least possible value of w1 + l1 + w2 + l2 + w3 + l3 + w4 + l4 + w5 + l5. Since w1 * l1 = x, we can rewrite this as:

[tex]w1 + l1 + 4 * sqrt(x / w1) + 4 * sqrt(w1 / x)[/tex]

To find the minimum value of this expression, we can take its derivative with respect to w1, set it equal to zero, and solve for w1:

[tex]d/dw1 (w1 + l1 + 4 * sqrt(x / w1) + 4 * sqrt(w1 / x)) = 1 - 2 * sqrt(x) / w1^1.5 + 2 * sqrt(x) / w1^2.5 = 0[/tex]

Solving for w1, we get:

[tex]w1 = 2 * x^(1/4)[/tex]

Substituting this back into our expression for the sum of the rectangle dimensions, we get:

[tex]w1 + l1 + 4 * sqrt(x / w1) + 4 * sqrt(w1 / x) = 2 * x^(1/4) + 2 * x^(3/4) + 8 * (x / 2)^(1/4)[/tex]

To find the minimum value of this expression, we can take its derivative with respect to x, set it equal to zero, and solve for x:

[tex]d/dx (2 * x^(1/4) + 2 * x^(3/4) + 8 * (x / 2)^(1/4)) = 1/2 * x^(-3/4) + 3/2 * x^(1/4) + 2 / (2 * x)^(3/4) = 0[/tex]

Solving for x, we get:

x = 4

Therefore, the least possible value of w1 is:

w1 =[tex]2 * x^(1/4) = 2[/tex]

And the dimensions of the rectangles are:

Rectangle 1: 2 x 30

Rectangle 2: 4 x 15

Rectangle 3: 6 x 10

Rectangle 4: 8 x 7.5

Rectangle 5: 10 x 6

To know more about rectangle. here

https://brainly.com/question/25292087

#SPJ4

Therefore , the solution of the given problem of equation comes out to be 10x - y = 51 is the point-slope form of the equation of the line passing through the points (6, -9) and (7, 1).

Variable words are frequently used in complex algorithms to show consistency between two arguments that are opposed to one another. Academic expressions called equations are used to show the equality of various academic figures. Take into account the details in the z + 7 proposals.

Here,

The equation for the line passing between the points (6, -9) and (7, 1) must be found in the point-slope form.

Using the equation m = (y2 - y1) / (x2 - x1), find the slope (m) of the line, where (x1, y1) and (x2, y2) are the coordinates of the two points.

=> (x1, y1) = (6, -9)

=> (x2, y2) = (7, 1)

=> m = (1 - (-9)) / (7 - 6)

=> m = 10 / 1 m = 10

Consequently, the line's slope is 10.

=> y - y1 = m(x - x1)

=> m = 10 (x1, y1) = (6, -9)

=> y - (-9) = 10(x - 6)

=> y + 9 = 10x - 60

=> 10x - y = 51

Therefore, 10x - y = 51 is the point-slope form of the equation of the line passing through the points (6, -9) and (7, 1).

To know more about equation visit:

https://brainly.com/question/649785

#SPJ1

The length of chord XY is 5√2.

What is the length of the chord?

It is described as the line segment that connects any two points on the circle's circumference without going through the circle's center. As a result, the diameter is the chord of a particular circle that is the longest and goes through its center. In mathematics, determining the chord's length can be crucial at times.

Here, we have

Given: A circle with center O and radius 5 has a central angle XOY. X and Y are points on the circle. ​If the measure of arc XY is 90 degrees.

We have to find the length of chord XY.

∠XOY = 90°

OX = OY = 5

We draw a perpendicular from the center to chord XY bisect XY at D.

Now, since OD bisects ∠XOY

∠XOD = ∠YOD = 90°/2 = 45°

Now, in ΔXOD

sin45° = XD/OX

1/√2 = XD/5

5/√2  = XD...(1)

In ΔYOD

sin45° = YD/OY

5/√2  = YD...(2)

Adding (1) and (2), we get

XD + YD = 5/√2 + 5/√2

XY = 5√2

Hence, the length of chord XY is 5√2.

To learn more about the length of the chord from the given link

https://brainly.com/question/26094865

#SPJ1

Answer:

2.50 + 9.50h

Step-by-step explanation:

Sky Launch Trampoline Park charges customers $9.50 per hour they spend jumping. Each customer must also pay $2.50 for grip socks.

Let the number of hours be h.

The equation will be:

= 2.50 + (9.50 × h)

= 2.50 + 9.50h

The total surface area of the triangular prism is calculated to be equal to 608 square centimeters.

The triangular prism can be observed to be a large rectangle and two identical triangles, so we shall calculate for the total surface area as follows:

area of one triangle = 1/2 × 8 cm × 12 cm

area of one triangle = 48 cm²

area of the two triangle faces = 2(48) = 96 cm²

area of the large rectangle face = (10 + 12 + 12) cm × 16 cm = 512 cm²

Total surface area of prism = 96 cm² + 512 cm² = 608 cm²

Therefore, the total surface area of the triangular prism is calculated to be equal to 608 square centimeters.

Read more about surface area here:https://brainly.com/question/12506372

#SPJ1

The missing length is 7.5 cm.

What is a rectangular prism?

A three-dimensional solid form with six faces, including rectangular bases, is called a rectangular prism. A rectangular prism also refers to a cuboid. A cuboid and a rectangular prism have the same cross-section.

Here, we have

Let the missing length be x cm.

The formula for the surface area of a rectangular prism is:

SA = 2lw + 2lh + 2wh

We are given that the height and width are both 9 cm, so we can substitute those values and simplify:

432 = 2(x)(9) + 2(x)(9) + 2(9)(9)

432 = 18x + 18x + 162

432 - 162 = 36x

270 = 36x

x = 270/36

x = 7.5

Hence, the missing length is 7.5 cm.

To learn more about the rectangular prism from the given link

https://brainly.com/question/31509002

#SPJ1

Answer: The dividend yield is the annual dividend payment divided by the stock's current market price, expressed as a percentage.

Dividend yield = (Annual dividend payment / Stock's current market price) x 100%

In this case:

Annual dividend payment = $1.98

Stock's current market price = $41.68

Dividend yield = ($1.98 / $41.68) x 100% = 4.75%

Therefore, the dividend yield for AT&T is 4.75%.

Step-by-step explanation:

This means that the corresponding sides of the two triangles are in proportion, and therefore CD is parallel to AB, as required.

A triangle is a polygon with three sides and three angles. It is one of the basic shapes in geometry and is often used in mathematics, science, engineering, and art. Triangles can be classified into different types based on the length of their sides and the size of their angles. Triangles are used in various applications, such as in the construction of buildings, bridges, and other structures, as well as in navigation and surveying. They are also important in various fields of mathematics, including trigonometry and geometry.

Here,

To use similarity theorems to show that CD is parallel to AB, we need to first establish that triangles AEB and CED are similar. If we can show that these triangles are similar, then we can use the corresponding angles theorem, which states that if two pairs of corresponding angles are congruent, then the lines containing the sides are parallel.

Let's compare the two triangles AEB and CED:

Angle AEB is congruent to angle CED (both are vertical angles).

Angle EAB is congruent to angle ECD (both are alternate interior angles formed by a transversal cutting parallel lines AB and CD).

Angle BAE is congruent to angle DCE (both are alternate interior angles formed by a transversal cutting parallel lines AB and CD).

Therefore, we have established that triangles AEB and CED are similar by the angle-angle-angle similarity theorem.

Now that we have shown that the triangles are similar, we can use the corresponding sides theorem, which states that the corresponding sides of similar triangles are in proportion, to find out if CD is parallel to AB.

The corresponding sides of AEB and CED are:

AE/CE = AB/CD

Substituting the given values, we have:

AC + CE / CE = AB / BD

4 + 12 / 12 = AB / (14/3)

16/12 = AB / (14/3)

AB = (16/12) x (14/3)

= 56/9

Now we can use the corresponding sides theorem to find the length of CD:

AE/CE = AB/CD

Substituting the values we have found, we get:

4/12 = (56/9)/CD

CD = (56/9) x (12/4)

= 14

Since we have found that AB = 56/9 and CD = 14, we can see that:

AB/CD = (56/9)/14

= 4/3

This means that the corresponding sides of the two triangles are in proportion, and therefore CD is parallel to AB, as required.

To know more about triangle,

https://brainly.com/question/28600396

#SPJ1

The unit for the coefficient k would be dollars per unit of length squared.

To find the units for the coefficient k in the formula C = klw, we need to analyze the units of each variable.

C represents the cost of the home, which is measured in dollars.

l represents the length of the home, which is measured in some units of length, such as feet or meters.

w represents the width of the home, which is also measured in some units of length, such as feet or meters.

Therefore, we can determine the units for k by analyzing how the units for C, l, and w combine in the formula C = klw.

Starting with the left-hand side of the equation, we know that C represents dollars.

On the right-hand side of the equation, we have k times l times w. To determine the units of k, we need to figure out what units would make the entire right-hand side of the equation equal to dollars.

Since we are multiplying three quantities (k, l, and w), the units of k must cancel out the units of length in l and w in order to leave us with units of dollars.

This means that the units of k must be dollars per unit of length squared. We can write this as:

k = $/length^2

So, the units for the coefficient k in the formula C = klw are dollars per unit of length squared.

More on units of variables can be found here: https://brainly.com/question/27853679

#SPJ1

Buy-side order flow is the number of individual buy orders and the total number of shares that wish to buy. ​

This is a crucial metric that is used by traders, investors, and analysts to gauge the demand for a particular security or asset.

The buy-side order flow refers to the number of shares that market participants want to purchase at a given time, and it provides valuable insights into the sentiment of the market. If there are more buy orders than sell orders, then there is a higher demand for the security, which can lead to an increase in the price of the asset. On the other hand, if there are more sell orders than buy orders, then there is a higher supply of the security, which can lead to a decrease in the price of the asset.

Traders and investors use buy-side order flow data to help them make informed decisions about when to buy or sell a security. By analyzing the number of buy orders and the total number of shares that wish to buy, they can identify trends and patterns in the market, and adjust their strategies accordingly. Additionally, buy-side order flow data can be used to help identify potential support and resistance levels for a security, which can be useful in setting stop-loss orders and other risk management measures.

Overall, the buy-side order flow is an important metric that provides valuable insights into the sentiment of the market and helps traders and investors make informed decisions about their investments.

To learn more about number here:

https://brainly.com/question/29595846

#SPJ4

Therefore , the solution of the given problem of probability comes out to be the experimental likelihood that a reggae CD will be the next one lent out is roughly 0.4615, or 46.15%.

Any considerations technique's main objective is to determine the likelihood event that a claim is true or that a particular incident will happen. Any number from 0 to 1, where 0 traditionally represents a percentage and 1 typically denotes the degree of certainty, can be used to represent chance. A probability illustration shows the likelihood that a particular event will occur.

Here,

Given: 86 Latin CDs were lent out, 16 were rock CDs, 45 were hip-hop CDs, and 126 were reggae CDs.

=> CDs loaned out in total: 86 + 16 + 45 + 126 = 273

=> 126 reggae CDs were lent out.

Number of reggae CDs loaned out relative to the total number of CDs loaned out, experimental likelihood of lending a reggae CD

=> A reggae CD's experimental chance of being lent out  = 126/273.

We may calculate the experimental probability's approximation using a calculator as follows:

=> A reggae CD will be lent out with an experimental probability of 0.4615.

Therefore, the experimental likelihood that a reggae CD will be the next one lent out is roughly 0.4615, or 46.15%.

To know more about probability visit:

https://brainly.com/question/11234923

#SPJ1

Answer:

126/273

Step-by-step explanation:

The number of possible letter combinations in the words presented is as follows:

CANNON: 2520

BANANA: 120

TOMORROW: 2520

REFERENCE: 20160

It is used to determine how many distinct arrangements can be made from a given set of elements.

1) CANNON: CANNON is made up of seven letters, two of which are identical 'N's. So, the following formula can be used to get the total number of permutations for CANNON:

Total number of permutations = 7! / 2!

= (7 x 6 x 5 x 4 x 3 x 2 x 1) / 2!

= 2520

2) BANANA: BANANA is made up of six letters, three of which are the letter 'A' and are similar. The total amount of BANANA combinations can be calculated using the formula below:

Total number of permutations = 6! / 3!

= (6 x 5 x 4 x 3 x 2 x 1) / 3!

= 120

3) TOMORROW: The word TOMORROW is made up of seven letters, two of which are identical 'O's. Thus, the sum of TOMORROW's permutations can be determined as follows:

Total number of permutations = 7! / 2!

= (7 x 6 x 5 x 4 x 3 x 2 x 1) / 2!

= 2520

4) REFERENCE: Eight letters make up REFERENCE, two of which are identical 'E's. So, the following formula can be used to determine the total number of permutations for REFERENCE:

Total number of permutations = 8! / 2!

= (8 x 7 x 6 x 5 x 4 x 3 x 2 x 1) / 2!

= 20160

To know more about permutations, visit:

https://brainly.com/question/28065038

#SPJ1

Answer:

1.a

2.c

3.d

4.b

Step-by-step explanation:

The volume of the solid as shown in the diagram is 540 cm².

Volume is the space occupied by a solid shape.

To calculate the volume of the of the solid, we use the formula below

Formula:

Where:

From the diagram in question,

Given:

Substitute these values into equation 1

Hence, the volume is 540 cm³.

Learn more about volume here: https://brainly.com/question/1331127

#SPJ1

The slope-intercept equation of line is -1 and equation will be y = -x - 1.

What is the slope?

m = (y2 - y1) / (x2 - x1) is the formula for calculating slope from two points on a line, (x1, y1) and (x2, y2). Here,

m = the line's slope

x1 is equal to the initial point's x-coordinate.

y1 is the first point's y-coordinate.

x2 is equal to the second point's x-coordinate.

The second point's x-coordinate is equal to y2.

x1 = -3, y1 = 4; x2= -2, y2=3

m = (3-4)/(-2 - (-3))

= -1 / (-2+3)

= -1/1

m = -1

Substitute the value in given equation:

y = -x + (-1)

y = -x - 1

Hence, the slope-intercept equation of line is -1 and equation will be y = -x - 1.

To know more about slope check the below link:

https://brainly.com/question/16949303

#SPJ9

Answer:

yes

Step-by-step explanation:

The hexadecimal system numbering system is base 16; in other words, 16 numerals are used to express any given number.

In this system, 16 numerals are used to represent any given number. The numerals used in this system are 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E, and F, where A represents 10, B represents 11, and so on, up to F, which represents 15.

This system is commonly used in computer science, as it is more compact than the decimal system, and allows for easier conversion between binary and decimal systems. In the hexadecimal system, each digit represents a power of 16, just as each digit in the decimal system represents a power of 10.

To know more about hexadecimal system here

https://brainly.com/question/15452295

#SPJ4

Step-by-step explanation:

+ 1.25

every new term is the previous term + 1.25.

with starting value -1.75

f(n) = 1.25n - 1.75

Below is the correct matching of the questions to the right answers

The statistical measures listed in the previous question are often used to describe and analyze statistical variables.

For instance, the range of a data set is a measure of the spread of values in a variable, while the quartiles and interquartile range provide information about the distribution of the variable. Mean average deviation is a measure of the variability of the variable around its mean value.

Learn more about statistical measures here:

https://brainly.com/question/15525560

#SPJ1

1. Mean average deviation - The average deviation of the data from the mean.

2. Range of a data set - The difference between the highest value and the lowest value in a numerical data set.

3. First quartile - The median in the upper half of the rank-ordered data.

4. Second quartile - The median value in the data set.

5. Third quartile - The median in the lower half of the rank-ordered data.

6. Interquartile range - he distance between the first and third quartiles of the data set.

The statistical measures are often used to describe and analyze statistical variables. For instance, the range of a data set is a measure of the spread of values in a variable, while the quartiles and interquartile range provide information about the distribution of the variable. Mean average deviation is a measure of the variability of the variable around its mean value.

Read more about Range

brainly.com/question/24326172

#SPJ1