Your mother asks you to carry a load of wood to the fireplace and lower it to the hearth. In doing this you have used your arms as levers. Which statement describes this as a class three lever?





Question 13 options:

The wood in your hands was the fulcrum, the load your elbow, and the effort (input force) was supplied by your arm muscles.


The wood was the load in your hands, the fulcrum was your elbow and the effort (input force was supplied by your arm muscles.


The fulcrum was the muscles in your arms, the load was the wood in your hands and the effort (input force) was the elbow.

Answer:

Well, I think you're talking about kinematics, especially uniform rectilinear motion. We know that there is a specific equation for that:

S = Vt + S0

With S being the distance, V the velocity, t the time and S0 the initial distance (initial displacement).

From this you can calculate t, if that's what you want.

Explanation:

[tex] \rule{999pt}{66646pt}[/tex]

The resultant velocity of  the boat is equal to 2 m/s due south.

Given the following data:

To determine the resultant velocity of  the boat:

Resultant velocity can be defined as the sum (addition) of each of the vector velocity acting on a physical or an object. Thus, it is simply a combination of two or more single vector velocity.

Note: When the velocities are acting in the same direction, you will add them up while you will subtract when the velocities are acting in opposite directions.

In this scenario, the velocities are acting in opposite directions. Thus, we would subtract as follows:

[tex]V = 3 - 1[/tex]

V = 2 m/s due south.

Read more on resultant velocity here: https://brainly.com/question/11182174

Answer:

60n would be the needed force

The force needed to push a box weighing 30 N up a ramp that has an ideal mechanical advantage of 3 is equal to 10 N.

The mechanical advantage can be described as the ratio of the input force to the output force. The mechanical advantage of any machine can be determined by the ratio of the forces involved to do the work.

The ratio of the resistance force to the effort is called the actual mechanical advantage which will be comparatively less. The efficiency of a machine is always determined by equating the ratio of its output to its input.

The efficiency of the machine is equal to the ratio of the actual mechanical advantage (M.A.) and theoretical mechanical advantage. Mechanical advantage can be defined as the force produced by a machine to the force applied to it.

Given the load = 30 N and the ideal mechanical advantage = 3

Mechanical advantage = Load/ Effort

Input force or effort = Load/ M.A.

Force = 30/3

Input Force = 10 N

Learn more about the Mechanical advantage,  here:

brainly.com/question/16617083

#SPJ2

Answer: D

Explanation: moogle helps lol.

Using Newton's second law

[tex]\\ \sf\Rrightarrow F=ma[/tex]

[tex]\\ \sf\Rrightarrow 300=2m[/tex]

[tex]\\ \sf\Rrightarrow m=150kg[/tex]

Hey there!

The formula of “mass” in physics is:

m = F/a

Whereas “f” is ‘force’, “a” is ‘acceleration’, & “m” is your ‘mass’ of course.

mass = 300 Net force/2 acceleration

300 Net force/2 acceleration = m

mass = 150

Therefore, your answer is: 150 kg

Good luck on your assignment and enjoy your day!

~Amphitrite1040:)

Answer:

1.1x10¹⁶ kg

Explanation:

Let m =  mass of asteroid y.

Because asteroid y has three times the mass of asteroid z, the mass of asteroid z is m/3.

Given:

F = 6.2x10⁸ N

d = 2100 km = 2.1x10⁶ m

Note that

G = 6.67408x10⁻¹¹ m³/(kg-s²)

The gravitational force between the asteroids is

F = (G*m*(m/3))/d² = (Gm²)/(3d²)

or

m² = (3Fd²)/G

    = [(3*(6.2x10⁸ N)*(2.1x10⁶ m)²]/(6.67408x10⁻¹¹ m³/(kg-s²))

   = 1.229x10³² kg²

m = 1.1086x10¹⁶ kg = 1.1x10¹⁶ kg (approx)

the compare software

hope it's help

Answer:

you ask or answer?

Explanation:

thanks for point

By Newton's second law, the net force acting on the block in the vertical direction is

∑ F [ver] = n - mg = 0

where n = magnitude of normal force and mg = weight of the block. It follows that n = mg.

When the block is at rest, the applied force X will not be enough to move the box until it can overcome the maximum mag. of static friction. If µ[s] is the coefficient of static friction, then the maximum mag. of the frictional force is

f = µ[s] n = µ[s] mg

The net horizontal force would be

∑ F [hor] = X - µ[s] mg = 0

so a minimum force of X = µ[s] mg is required to get the block moving. Any mag. smaller than this and the block stays at rest/in equilibrium.

Once the mag. of X exceeds µ[s] mg, the block will begin to move. At that point, if the coefficient of kinetic friction is µ[k], then the net force on the block is

∑ F [hor] = X - µ[k] mg = 0

so a minimum force of X = µ[k] mg would be needed to keep the block moving at constant speed, or otherwise X = µ[k] mg + ma if the block is accelerating with mag. a.

The principles here are captured in the attached plot.

[tex]it \: was \: helpful \: to \: you[/tex]

# be careful#

Answer:

this question makes no sense

Explanation:

like how do you get this question

Answer:They require more energy to break intermolecular forces hence polar molecules have higher melting points and boiling points than non-polar molecules of similar size, shape and number of electrons.

Explanation:

Answer:

Density of the mixture = 855.56kgm-3

Explanation:

Density = Mass / Volume

Volume of Liquid X = 0.5m³

Density of Liquid X = 900kgm-3

Mass of Liquid X = Density × Volume

= 900kgm-3 × 0.5m³ = 450kg

Volume of Liquid Y = 0.4m³

Density of Liquid Y = 800kgm-3

Mass of Liquid Y = Density × Volume

= 800kgm-3 × 0.4m³= 320kg

As X and Y are mixed, we add their masses and volumes together:

Mass = 770kg

Volume = 0.9m³

Now we can find the density of the mixture:

Density = 770kg / 0.9m³ = 855.56kgm-3 (rounded to the 2nd decimal)

Answer:

not able to understand the question

Answer:

The mass of the object is 11.2 Kg.

Hope you could get an idea from here.

Doubt clarification - use comment section.

The mass of an object that has a weight of 110 N is 11.2kg.

The weight of an object is defined as the force that acts on the object due to gravity. It is a vector quantity in some cases such as when the force of gravity acts on an object but it is also a scalar quantity where the force of gravity has a magnitude.

Weight is the gravitational force of attraction on an object due to the presence of another heavy object, such as the Earth or the Moon. It is expressed by multiplying the mass by the gravitational acceleration.

In above case,

Weight (W) = 110 N

Acceleration due to gravity (g) = 9.8 m/s^2

Let the mass of the object be m.

By using the formula,

W = mg,

[tex]110 N = 9.8 m/s^2 *m\\m = 110 N/ 9.8 m/s^2[/tex]

so, m = 11.2 Kg

Thus, the mass of an object that has a weight of 110 N is 11.2kg.

Learn more about Weight, here:

brainly.com/question/23312072

#SPJ2

This question involves the concepts of the equations of motion in vertical direction.

The height of the bridge is "116.8 m".

We will use the second equation of motion in vertical direction to find out the height of the bridge.

[tex]h=v_it+\frac{1}{2}gt^2\\\\[/tex]

where,

h = hieght = ?

vi = initial speed = 0 m/s

t = time taken = 4.88 s

g = acceleration due to gravity = 9.81 m/s²

Therefore,

[tex]h=(0\ m/s)(4.88\ s)+\frac{1}{2}(9.81\ m/s^2)(4.88\ s)^2[/tex]

h = 116.8 m

Learn more about the equations of motion here:

https://brainly.com/question/5955789?referrer=searchResults

Answer:

The force of the car is 15000N.

Explanation:

The unit of force is Newtons (N), so based on the question, the force is 15000 Newtons.

Answer:

Approximately [tex]6.59\times 10^{3}\; \rm m\cdot s^{-1}[/tex].

Explanation:

Look up the radius of the earth: approximately [tex]6.371 \times 10^{3}\; \rm km[/tex].

The radius of the orbit of this satellite is the of the radius of the earth (at ground level) plus the height of the satellite relative to ground level:

[tex]\begin{aligned}r &\approx 6.371 \times 10^{3}\; {\rm km} + 550\; {\rm km} \\ &= 6.921 \times 10^{3}\; \rm km\end{aligned}[/tex].

Convert the units of both distance and time to standard units:

Orbital radius:

[tex]\begin{aligned}r &\approx 6.921 \times 10^{3}\; {\rm km} \\ &= 6.921 \times 10^{3}\; {\rm km} \times \frac{10^{3}\; \rm m}{1\; \rm km} \\ &= 6.921 \times 10^{6}\; \rm m\end{aligned}[/tex].

Orbital period:

[tex]\begin{aligned}t &= 110\; \text{minute} \\ &= 110\; \text{minute} \times \frac{60\; \text{second}}{1\; \text{minute}} \\ &= 6.6 \times 10^{3}\; \text{second}\end{aligned}[/tex].

Calculate the circumference of this orbit:

[tex]\begin{aligned}& 2\, \pi\, r \\ \approx\; & 2 \, \pi \times 6.921 \times 10^{6}\; {\rm m} \\ \approx\; & 4.35 \times 10^{7}\; \rm m\end{aligned}[/tex].

Calculate the orbital speed (tangential) of this satellite:

[tex]\begin{aligned}v &= \frac{2\, \pi\, r}{t} \\ &\approx \frac{4.35 \times 10^{7}\; \rm m}{6.6 \times 10^{3}\; \rm s} \\ &\approx 6.6 \times 10^{3}\; \rm m \cdot s^{-1}\end{aligned}[/tex].

Answer:

Scientific investigation is a quest to find the answer to a question using the scientific method.

Explanation:

the scientific method is a systematic process that involves using measurable observations to formulate, test or modify a hypothesis.

The horizontal component of the velocity is equal to: D. 15 m/s.

Given the following data:

To determine the horizontal component of the velocity:

The horizontal component of the velocity represents the influence of velocity  in displacing an object or projectile in the horizontal direction.

Mathematically, the horizontal component of velocity is given by the formula:

[tex]V_x = Vcos(\theta)[/tex]

Substituting the given parameters into the formula, we have;

[tex]\\\\V_x = 30cos(60)\\\\V_x = 30 \times 0.5[/tex]

Horizontal component, Vx = 15 m/s

Read more on horizontal component here: https://brainly.com/question/24681896

The final temperature of water is equal to 50.9999°C

Given the following data:

To determine the final temperature of water:

Mathematically, quantity of heat is given by the formula;

[tex]Q=mc\theta[/tex]

Where:

Substituting the given parameters into the formula, we have;

[tex]5000=2.38892 \times 10^{-2}\times 4186 \times \theta\\\\5000=100.0001912 \theta\\\\ \theta=\frac{5000}{100.0001912} \\\\ \theta=49.9999^{\circ}C[/tex]

For the final temperature:

[tex]\theta = T_2 - T_1\\\\T_2 = \theta+T_1\\\\T_2 = 49.9999 + 50[/tex]

Final temperature = 50.9999°C

Read more on final temperature here: https://brainly.com/question/2834175

The magnitude of the magnetic force acting on the charge which moves to the right is 0 N.

Given to us,

the charge [tex]q[/tex] =  [tex]5\times 10^{-7}[/tex] C,

the velocity [tex]v[/tex] = [tex]2.6\times 10^5[/tex]  m/sec,

the magnetic field [tex]B[/tex] = [tex]10^{-2}[/tex] T,

angle between the direction of v and B [tex]\theta[/tex] = 0,

Magnetic force is as important as the electrostatic or Coulomb force. The magnitude of the magnetic force F on a charge q moving at a velocity of v in a magnetic field of strength B is given by

[tex]\begin{aligned}F&=qvB\ sin\Theta\\&= 5\times10^{-7}\times2.6\times10^5\times10^{-2} \times sin(0)\\&= 0\ N\\\end{aligned}[/tex]

Hence, the magnitude of the magnetic force acting on the charge which moves to the right is 0 N

For More Information visit:

https://brainly.com/question/4111572

Answer:

3m

Explanation:

I can't make a drawing right know, but it's all around vectors. First of all the ball travels down 5 meters, so we have a vector pointing down, then it is reflected and travels 2 meters up. You have to sum the vectors so you obtain that the distance traveled is: 5-2 meters = 3m

Answer:

It can rotate in any direction. The sign of the angular acceleration depends on how you set the reference system, it can be both negative or positive.

Answer: 300N

Explanation:

Impulse= Mass * Velocity

F.T = M * V

F= MV/T

F= (0.15*20)/ 0.01

F= 300N

Answer:1590 N

Explanation:

Impulse =  change in momentum/time

change in momentum = 0 - 50 x 35 = -1750

-1750/1.1 = 1590 (3s.f.) N

Answer:

E.visible lights

Explanation:

hope its attachments

Answer:

functionalist theory,feminist theory. discipline of sociology