Answer:
C) 1 x 10-10 M
Explanation:
To solve this question we must use the equation:
Kw = [H+] [OH-]
Where Kw is the equilibrium dissociation of water = 1x10-14
[H+] is the molar concentration of hydronium ion = 1x10-4M
[OH-] is the molar concentration of hydroxyl ion
Replacing:
1x10-14= 1x10-4 [OH-]
[OH-] = 1x10-14 / 1x10-4M
[OH-] = 1x10-10 M
Right option is:
C) 1 x 10-10 Mcontainer has 3 moles of gas with a volume of 60 liters and at a temperature of 250 K, Calculate the pressure inside the container in kPa
Answer:
103.98 kpa
Explanation:
Pv= nRT
Where
P= pressure of the system=
n= number of moles= 3 moles
T= temperature= 250 K
Volume of the container= 60 liters
R= 0.0821L.atm/K.mol
Substitute the values
Pv= nRT
P= nRT/ V
= (3×0.0821×250)/60
= 1.026 Atm
1atm= 101325 Pascal
1.026 atm= X
= 103984 pasca
Convert to kilopascal
= 103984 pasca /1000
= 103.98 kpascal
a. Use VSEPR to predict bond angles at the marked atom. The angle is : _______ degrees. The expected hybridization at the marked atom is _____ . b. Use VSEPR to predict bond angles at the marked atom. The angle is : _______ degrees. The expected hybridization at the marked atom is _____ .
Answer: Hello your question is incomplete attached below is the complete question with the missing diagrams
a) The angle = 120°
hybridization = sp2
b) The angle = 120°
hybridization = sp2
Explanation:
a) using VSPER to predict bond angles
Given that there is the presence of 1 double bond to C and 2 single bonds one to C and one to H around the marked atom which equals 3 sets of electrons surrounding the central atom.
hence according to VSPER theory the angle = 120° while the Hybridization = sp2
b) Using VSPER to predict bond angles at marked atom
Given that there is There is 1 double bond to C and 2 single bonds to the different C atoms respectively around the marked atom, which makes 3 sets of electorns surrounding the central atom
hence according to VSPER theory the angle = 120° while the Hybridization = sp2
what is the difference between autotrophs and heterotrophs?
Answer:
Autotrophs have the ability to synthesize their own food from the substances surrounding them. Examples of this are photosynthesis or chemical energy. Heterotrophs cannot synthesize their own food. They have to get their nutrition from other animals or plants.
In shorter terms, autotrophs are plants. Heterotrophs are humans.
Explanation:
Convert 7.65 x 10^5 mL into Mega-Liter.
Answer:
[tex]1 \: ml = \frac{1}{1000} l \\ 7.65 \times {10}^{5} \: ml = \frac{7.65 \times {10}^{5} }{1000} \\ = 765 \: l[/tex]
balance NaHCO3(S) -NaOH(S)+CO(G)
Answer:
NaHCO3(s) → NaOH(s) + CO2(g)
Explanation:
A balanced chemical equation is that in which the number of atoms of each element on the reactant side is equal to the number of atoms of each element on the product side.
Based on the following equation below, each atom on the reactant side matches the ones on the product side, hence, the equation is said to be balanced. The balanced equation is as follows:
NaHCO3(s) → NaOH(s) + CO2(g)
Find the moles of 127.5g of NaCl.
Answer:
n = 2.18 moles
Explanation:
Given that,
Mass = 127.5g
Molar mass of NaCl = 58.44 g/mol
We need to find the number of moles. We know that,
No. of moles = Given mass/molar mass
Put all the values,
[tex]n=\dfrac{127.5\ g}{58.44\ g/mol}\\\\n=2.18\ moles[/tex]
Hence, there are 2.18 moles of 127.5g of NaCl.
Identify which reactants is reduced and which is oxidized .
2Au^3+(aq) + 3Cd(s) -> 2au(s) + 3Cd^2+(s)
Please help
Answer:
CD is oxidised
and
Au is reduced
hope helps u
More energy can be absorbed by a larger sample of a substance due to its higher mass.
True
or
False
?
Answer:
true
Explanation:
How many moles of hypomanganous acid, H3MnO4, are contained in 22.912 g?
Answer:
0.188mol
Explanation:
Using the formula as follows:
mole = mass/molar mass
Molar mass of hypomanganous acid, H3MnO4 = 1(3) + 55 + 16(4)
= 3 + 55 + 64
= 122g/mol
Mass of H3MnO4 is given as 22.912 g
Hence;
moles = 22.912 ÷ 122
number of moles = 0.188mol
Porque una solución acuosa 30g de sal en 80g de agua Que % de masa de sal contiene
Given :
An aqueous solution of 30g of salt in 80g of water.
To Find :
The % mass of the salt.
Solution :
Mass percentage of the salt is given by :
[tex]Mass \ \% = \dfrac{Mass \ of \ salt}{Mass \ of \ salt + Mass \ of \ water}\\\\Mass \ \% = \dfrac{30}{30 + 80 }\times 100 \%\\\\Mass \ \% = 27.27\ \%[/tex]
Hence, this is the required solution.
Add more drink mix until you notice a color change. Have you increased or decreased the concentration? (Higher number means a higher concentration).
Answer:
Increased the concentration
Explanation:
Complete Question
Open the simulation by pushing the play button. Begin by dragging the concentration tester overto the liquid and add drink mix until the concentration reaches approximately 2.oo mol/L. This means there are 2.00 moles of the drink mix in 1 Liter of the solution. Add more drink mix until you notice a color change. Have you increased or decreased the concentration? (Higher number means a higher concentration).
Solution
Drink mix is basically the solute which is added to solvent i.e water.
The higher is the amount of drink mix in the solvent, the higher is the concentration of the solute and hence darker is the color of the drink.
Hence, in the case the concentration of the drink has been increased.
What is the approximate vapor pressure when the gas condenses at 70°C?
150
5
760
380
Answer:
380
Explanation:
I couldn't find the answer anywhere so this is the correct answer. I got it graded.
What is the molarity of a solution made from dissolving 3.0 moles of KCl in 500 mL of solution?
A. 750 M KCl solution
B. 3.0 M KCl solution
C. 0.06M KCl solution
D. 6M KCl solution
Answer:
najah zggs haihß hajoa ha8 a an àjàhajß
If 2.18 grams of Br2 react with excess KI, how many grams of KBr are formed? Br2 + 2 K1 - 12 +2 KB
Answer:
2.18 grams of Br2 reacts to produce 3.25 grams of KBr
Explanation:
The balanced equation is
2 KI + Br2 → 2 KBr + I2
2 moles of KI and 1 mole of Br2 reacts to produce two molecules of KBr
Mass of two moles of KI = 2 * 166 grams
Mass of one mole of Br2 = 159.808 grams
Mass of two moles of KBr = 2* 119 grams
Thus, 159.808 grams of Br2 reacts to produce 2* 119 grams of KBr
2.18 grams of Br2 reacts to produce {(2* 119)/ 159.808} * 2.18 grams of KBr
2.18 grams of Br2 reacts to produce 3.25 grams of KBr
1 Mg (s) + 2 HCl (aq) --> 1 MgCl2 + 1 H2 If 2.50 mol of hydrochloric acid is reacted, how many moles of magnesium chloride is produced?
Answer:
1.25 moles of magnesium chloride are produced
Explanation:
Based on the reaction:
Mg(s) + 2HCl (aq) → MgCl₂(s) + H₂(g)
1 mole of magnesium, Mg, reacts with 2 moles of hydrochloric acid, HCl, to produce 1 mole of magnesium chloride, MgCl₂ and 1 mole of hydrogen gas.
To solve this question we have to tak, from the chemical equation:
2 mol HCl = 1mol MgCl₂
That means, the moles of MgCl₂ produced from 2.50mol HCl are:
2.50 mol HCl * (1mol MgCl₂ / 2mol HCl) =
1.25 moles of magnesium chloride are producedcorrect name for ZnS
Zinc sulfide (or zinc sulphide) is an inorganic compound with the chemical formula of ZnS. This is the main form of zinc found in nature, where it mainly occurs as the mineral sphalerite.
How does the electron-cloud model describe electrons?
The exact position of an electron can be known.
An electron can be found at certain distances from the nucleus.
An electron has a high probability of being in certain regions.
Each electron follows a specific path around the nucleus.
Answer:
C. An electron has a high probability of being in certain regions.
Explanation:
In the electron cloud model, there are no electron-orbits around the nucleus but a cloud. This cloud has various densities with respect to distance from the nucleus. The most dense region of the cloud (which is the region close to the nucleus) is where electrons has the highest probability of existence.
The model explains that an electron a greater chance of being in the region closer to the nucleus. Thus, an electron has a high probability of being in certain region of the cloud about the central nucleus. And an electrostatic force exists between the nucleus and the electrons.
Answer:
c
Explanation:
what the total charge of an atom with 8 protons 10 neutrons and 10 electrons?
Answer:
since an oxygen atom normally has 8 protons and 8 electrons, this ion has 10 electrons (-10 charge) and 8 protons (+8 charge) giving it a charge of -2 (-10 + 8 = -2).
Explanation:
Which statement about pollination is
TRUE?
Flowers are always pollinated
by insects.
Pollen is always transferred
from the same flower
When pollination occurs.
pollen sticks to the anther.
When pollination occurs
pollen sticks to the stigma.
Answer:
D; the pollen sticks to the stigma
Explanation:
When a flower is pollinated, the pollen sticks to the stigma. However, it is not always pollinated by insects (birds and other factors can as well), pollen can be transferred from different flowers (as long as they're the same species) and pollination doesn't stick to the anther.
Answer:
d
Explanation:
because when pollution occurs than the insects move to the flower to sick nectar and then pollan giains stuck in the insect body
Select the ion. HCl H 3O +1 H 2O
Answer:
[tex]H _{3}O {}^{ + } [/tex]
Hydroxonium ion
PLEASE HELP MEEEEEEEEEEEEE
Answer:
Explanation:
THE BEST ANSWER IS CCC
PLZ HELP ILL MARK BRAINLIEST
A glacial moulin increases the rate of ice sheet melting by...
O causing the ice sheet to melt from the middle
O increasing friction between the ice and bedrock
O reducing friction between the ice sheet and the bedrock
O melting the top center of an ice sheet
A student places three ice cubes in a beaker and allows them to partially melt. If she measures the temperature of the water in the beaker, what will she most likely observe? Explain your answer.
**Check for proof photos at the bottom.**
**Answers are in bold.**
__________________________________________________________
A student places three ice cubes in a beaker and allows them to partially melt. If she measures the temperature of the water in the beaker, what will she most likely observe? Explain your answer.
She will see that the temperature of the water is 0 degrees Celsius and it stays at that temperature until all the ice cubes completely melt.
__________________________________________________________
Use the table on the right to calculate each required quantity. Record values to 3 significant digits.
First answer: 35.8 kJ
Second answer: 871 g
Third answer: Fe
__________________________________________________________
An iron sphere with a mass of 75.00 g is heated to a temperature of 385.0°C. It is then placed in a beaker containing 150.0 g H2O at 100.0°C.
First answer: 339 kJ
Second answer: 9.02 kJ
Third answer: No
__________________________________________________________
A sample of water has a mass of 100.0 g. Calculate the amount of heat required to change the sample from ice at –45.00°C to water vapor at 175.0°C. Relevant constant values are given to the right.
First answer: 325 kJ
Second answer: boiling the water
__________________________________________________________
Identify the correct description for each part labeled on the diagram.
A: ✔ heating solid
B: ✔ melting
C: ✔ heating liquid
D: ✔ boiling
E: ✔ heating gas
F: ✔ melting point
G: ✔ boiling point
Where are the particles closest together?
✔ A
Explanation:When ice partially melts, the surrounding water remains at 0° Celsius. This is because ice melting only involves the water molecules overcoming intermolecular forces, or forces holding molecules together. The water molecules themselves aren't increasing in kinetic energy when turning into liquid. Since temperature measures kinetic energy, the temperature in this case, remains at 0°.
To find how much energy it takes to cause a phase change in a substance, you must find the number of moles, and determine whether to use ΔHvap and ΔHfus. ΔHvap is used to show how much energy is involved in evaporation and condensation, and ΔHfus is the same but used for melting and freezing. To find number of moles of a given substance, use the formula: mass of given substance divided by atomic mass. Both numbers have to use the same mass unit. Then, multiply number of moles by ΔHvap or ΔHfus to get kJ.
In a heating curve graph, the flat lines represent no change in energy, or the phase changes. The steep lines are change in energy, which are either heating or cooling. The bottom line is a heating/cooling solid. A heating/cooling solid is the coldest phase, which is why the line is at the bottom.
Here are photos of Edge to make things easier.
Global climate change is a result of human activity?
Answer:
Yes
Explanation:
Due to pollution, greenhouse gasses, etc
Humans are increasingly influencing the climate and the earth's temperature by burning fossil fuels, cutting down forests and farming livestock. This adds enormous amounts of greenhouse gases to those naturally occurring in the atmosphere, increasing the greenhouse effect and global warming.
list the universities of nepal and explain about one of them.
Answer:
Tribhuvan University is a university in Tribhuvan, Nepal. Tribhuvan University (TU) is a pioneering higher education institution in Nepal, having been founded in 1959. ......
Pokhara University... Kathmandu University...
Purbanchal University is located in Purbanchal, India.
Lumbini Bauddha University (LBU) is a university in Lumbini, Nepal...
Nepal Sanskrit University is a university dedicated to the study of Sanskrit in Nepal.
Midwestern University is a public university in the Midwest...
Nepal Open University is a public university in Nepal.
Explanation:
What is the subscript of Carbon? 6 CaCO3
Answer:
subscript is 3
Explanation:
the subscript is the number that is slightly lower than a # which in this case it's O
this indicates that there's 3 oxygen atoms
Answer:
the answer is 1 ♀️
Explanation:
Help needed ASAP, I will mark your answer as brainliest.
Answer:
b
Explanation:
b
Calculate the amount, in mol, of sodium atoms represented by 1.0x10(to the power of 20) sodium atoms
Explanation:
moles= number of particle or atom / 6.02×10^23
so
[tex] \frac{1.1 \times {10}^{20 } }{6.02 \times {10}^{23} } [/tex]
gives u 1.83×10^-4 moles
hope it make sense :)
Answer:
1.7 * 10^-4 moles
Explanation:
According to Avogadro, one mole of a substance contains 6.02 * 10^23 number of atoms, molecules, ions etc.
Hence;
1 mole of Na contains 6.02 * 10^23 atoms
x moles of Na contains 1.0x10^20 atoms
x = 1.0x10^20 * 1/6.02 * 10^23
x = 1.7 * 10^-4 moles
2.
The atoms that make up nitrogen gas...
N2
A share two covalent bonds.
B. have a definite shape.
1
C. share a pair of neutrons.
D. have two free electrons.
Answer:
A they share two covalent bonds
An investigation is conducted into how the mass of magnesium metal reacting with hydrochloric acid affects the amount of hydrogen gas produced.
Masses of 0.10g, 0.20g, 0.30g and 0.40g of powdered Mg metal are reacted with hydrochloric acid(HCl). The conical flask containing the reaction mixture of Mg and HCl is connected to another conical flask with a hose. The hydrogen gas produced by the reaction is collected in this conical flask. The greater the amount of hydrogen gas produced by the reaction the greater the pressure of the gas in the flask.
Answer:
A) what is the independent variable:
B) what is the dependent variable:
C) write a hypothesis for this investigation:
D) give 2 variables that should have been controlled for this investigation:
An investigation is conducted into how the mass of magnesium metal reacting with hydrochloric acid affects the amount of hydrogen gas produced.
Masses of 0.10g, 0.20g, 0.30g and 0.40g of powdered Mg metal are reacted with hydrochloric acid(HCl). The conical flask containing the reaction mixture of Mg and HCl is connected to another conical flask with a hose. The hydrogen gas produced by the reaction is collected in this conical flask. The greater the amount of hydrogen gas produced by the reaction the greater the pressure of the gas in the flask.
Answer:
A) what is the independent variable:
B) what is the dependent variable:
C) write a hypothesis for this investigation:
D) give 2 variables that should have been controlled for this investigation: