Answer:
1 gm = 1000 mg
N = No e^-y t where y = lambda the decay constant
N / N0 = .9969
ln .9969 = - y t
-.00310 = - 5 y
y = .00310 / 5 = .000621
So the half-life = .693 / y
T^1/2 = .693 / .000621 = 1116 or about 1120 yrs
A train is travelong at 22 m/s when the condutor gets a radio call about a car stalled on the tracks. He hits the emergancy brake and the train comes to a halt in 135 sevonds several meters before the car. What was the train's accleration during the emergency?
Answer:
final velocity = 0
because the train stoped
so,
acceleration = (v - u) ÷ tacceleration = (0 - 22) ÷ 135acceleration = -22 ÷ 135acceleration = -0.162 m/s²8. Cart 1 with mass of 2kg moving at +6m/s collides with cart 2 with a mass of 1kg,
which is at rest. If cart 1 moves at +2m/s after the collision, what is the velocity of
cart 2 after the collision? (include correct units, or you get no credit)
Answer:its 2kg
Explanation:
9.
A 2.85-cm diameter coin is placed a distance of 31.4 cm from a diverging lens that has a focal length
of-11.6 cm. Determine the image distance and the diameter of the image.
Answer:
image distance = -8.47 cm
diameter of the image = 0.769 cm
What do all clouds contain the some amount of
Answer:
A cloud is made up of liquid water droplets. A cloud forms when air is heated by the sun. As it rises, it slowly cools it reaches the saturation point and water condenses, forming a cloud.
Explanation:
Consider the two-slit interference experiment. Electromagnetic radiation passes through the two slits that are a distance 0.0287 mm apart. The path to the fourth-order bright fringe on the nearby screen forms an angle with the horizontal. What is the wavelength of the light?
409 nm
164 nm
570 nm
655 nm
Explanation:
Consider the two-slit Interference experiment. Electromagnetic radiation passes through the two slits that are a distance 0.0287 mm apart. The path to the fourth-order bright fringe on the nearby screen forms an angle with the horizontal. What is the wavelength of the light? (1 point) O 655 nm O 570 nm O 164 nm O 409 nm
COMPANY
is warming up important before doing an intense exercise or work-out? Wh?
Answer:
Yes, warming up is necessary before intense exercise, work-out or sports because they help regulate temperatures of your body. Warming up also makes your muscles ready for intense physical activities and prevents muscle cramps.
Explanation:
Which graph shows acceleration? A graph of position (meters) versus time (seconds) has a straight line running from 0 seconds 0 meters upward. A graph of position (meters) versus time (seconds) has a concave line running from 0 seconds 0 meters upward. A graph of position (meters) versus time (seconds) has a straight line running from 0 seconds positive number of meters downward to some later time 0 meters.
It's the one that has a concave line running upward.
Answer:
its the middle one
Explanation:
i did it on edge 2021
An unknoAn unknown additional charge q3 is now placed at point B, located at coordinates (0 m, 15.0 m ). Find the magnitude and sign of q3 needed to make the total electric field at point A equal to zero.wn additional charge q3 is now placed at point B, located at coordinates (0 m, 15.0 m ). Find the magnitude and sign of q3 needed to make the total electric field at point A equal to zero.\
Answer:
hello your question has some missing information attached below is the missing information
answer : q3 = 0.300 nC
Explanation:
Given that Eay is in the Y axis ( upward ) , E3 will be downward and this will make the sign on the the charge ( q3 ) to be positive
E3 = Eay. ( for an electric field to be neutral/zero the electric field in the opposite direction will have same magnitude )
To calculate the value of q3 we will apply the relation below
K*q3/( 15 - 12 )^2 = 0.300
= (9 * 10^9) * (q3 / 9 ) = 0.300
∴ q3 = 0.300 / 10^9
= 0.300 nC
Note : The value of Eay is been calculated outside this solution as it is not part of the question asked
What would be the mass of an atom with 2 protons and 3 neutrons?
Answer:
5
Explanation:
From the question given above, the following data were obtained:
Proton number = 2
Neutron number = 3
Mass number =.?
The mass number of a given atom is simply the sum of the protons and neutrons in the nucleus of the atom. Mathematically, it is expressed as:
Mass number = proton + neutron
With the above formula, we can obtain the mass number of the atom as follow:
Proton number = 2
Neutron number = 3
Mass number =.?
Mass number = proton + neutron
Mass number = 2 + 3
Mass number = 5
Thus, the mass number the atom is 5.
Which two criteria are least important for engineers to consider when developing a process to produce an important chemical?
A. The process should be located in a major city.
B. The process should use local, organic reactants.
C. The process should produce a significant amount of the product.
D. The process should be cost-effective.
Answer:
two least important criteria are A and B.
Explanation:
In an industrial production process there are criteria on the location of the production plants. Among the most important criteria we have that a good quantity is produced from the producer and that the process is cost-beneficial - cats to increase the profit of the company.
There are other desirable but minor criteria
A) The size of the city is of minor importance
b) Finding raw material locally is interesting, but its importance is less, the raw material can be sent from other locations.
Consequently the two least important criteria are A and B.
Answer:
A. The process should be located in a major city.
B. The process should use local, organic reactants.
Explanation:
ap.ex
Future space rockets might propel themselves by firing laser beams, rather than exhaust gases, out the back. The acceleration would be small, but it could continue for months or years in the vacuum of space. Consider a 1200 kg uncrewed space probe powered by a 15 MW laser. After one year, how far will it have traveled and how fast will it be going
Answer:
Acceleration = 0.0282 m/s^2
Distance = 13.98 * 10^12 m
Explanation:
we will apply the energy theorem
work done = ΔK.E ( change in Kinetic energy ) ---- ( 1 )
where :
work done = p * t
= 15 * 10^6 watts * ( 1 year ) = 473040000 * 10^6 J
( note : convert 1 year to seconds )
and ΔK.E = 1/2 mVf^2 given ; m = 1200 kg and initial V = 0
back to equation 1
473040000 * 10^6 = 1/2 mv^2
Vf^2 = 2(473040000 * 10^6 ) / 1200
∴ Vf = 887918.92 m/s
i) Determine how fast the rocket is ( acceleration of the rocket )
a = Vf / t
= 887918.92 / ( 1 year )
= 0.0282 m/s^2
ii) determine distance travelled by rocket
Vf^2 - Vi^2 = 2as
Vi = 0
hence ; Vf^2 = 2as
s ( distance ) = Vf^2 / ( 2a )
= ( 887918.92 )^2 / ( 2 * 0.0282 )
= 13.98 * 10^12 m
A small car is traveling at a speed of 60 mph on the highway. In the next lane, a large passenger bus is traveling at the same speed.
Answer:
A. The bus has more kinetic energy than the car.
Explanation:
As we know that
Kinetic energy is the amount of energy possessed by the body at the time when it is in motion.
Also,
Kinetic energy = 1 ÷ 2mv²
Here m denotes the mass of the body
and v denotes the velocity of the body.
So it would be based on the mass & velocity of the body
As if the passenger bus contains more kinetic energy as compared to the car because of the big mass
Hence, the first option is correct
what are the materials that you have illustrated?
Answer:
An illustration is a decoration, interpretation or visual explanation of a text, concept ... such as posters, flyers, magazines, books, teaching materials, animations, video games and films.
Explanation:
How do these terms relate to what is being attempted when making a nuclear
bomb (quick, explosive effect) as opposed to a nuclear power plant (controlled
steady production of energy)?.
Answer:
More than four-fifths of the single points of light we observe in the night sky are actually two or more stars orbiting together. The most common of the multiple star systems are binary stars, systems of only two stars together.o
Explain what happens to the path of light as it hits a piece of black paper, a glass mirror, and a glass
of water. Explain why the light behaves the way it does as it hits each object.
1. Light is _________ by the black paper.
2. Light is _________ by the mirror.
3. Light is _________ by the glass of water.
HELP ASAP PLEASE Comparing the types and amounts of EM radiation in an object could help scientists determine an object's what? structure age chemical composition all of the above are correct
Answer: Its all of the above
Explanation:
I had the same question and got it correct
Question number 11 how did we found the answer ?
Answer:
Option A. 57.14 Ω
Explanation:
From the question given above, the following data were obtained:
Resistor 1 (R₁) = 100 Ω
Resistor 2 (R₂) = 400 Ω
Resistor 3 (R₃) = 200 Ω
Equivalent Resistor (Rₚ) =?
The equivalent resistor in the above circuit can be obtained as follow:
1/Rₚ = 1/R₁ + 1/R₂ + 1/R₃
1/Rₚ = 1/100 + 1/400 + 1/200
Find the least common multiple (lcm) of 100, 400 and 200. The result is 400. Divide 400 by 100, 200 and 400 respectively and multiply the result with the numerator as shown
1/Rₚ = (4 + 1 + 2)/400
1/Rₚ = 7/400
Invert
Rₚ = 400/7
Rₚ = 57.14 Ω
When measuring volume, your final
result must be in
A. linear units.
B. single units.
C. squared units.
D. cubed units.
I will mark you brainlist!!
How is primary succession different from secondary succession? Give an example of an event that may lead to primary succession.
Answer:
Primary Succession is defined as the type of ecological succession, which occurs or start from the barren, uninhabited and unoccupied areas, such as the newly formed pond, rock, dunes, etc., while such kind of succession, which occurs in the area where there was the existence of life previously but got abandoned due to natural disturbances like deforestation, natural calamities (flood, earthquake, tsunami), the field with no vegetation is known as Secondary Succession
Explanation:
Some examples of primary succession include the formation of a new ecosystem after a volcano, glacier outbursts, or a nuclear explosion. Some examples of secondary succession include succession after fire, harvesting, logging, or abandonment of land or the renewal after a disease outbreak
i hope this answer helps :)
Water flows through a garden hose which is attached to a nozzle. The water flows through hose with a speed of 1.81 m/s and through the nozzle with a speed of 18.3 m/s. Calculate the maximum height (in m) to which water could be squirted if it emerges from the nozzle and emerges with the nozzle removed. (a) Emerges from the nozzle. m (b) Emerges with the nozzle removed, assuming the same flow rate. m
Answer:
a) 17.086m
b) 0.1671 m
Explanation:
Given data: speed of water through the hose = 1.81 m/s
through the nozzle = 18.3 m/s
We know that maximum height of an object with upward velocity v is given by,
a) H = v^2/2g
where H is the maximum height water emerges
= 18.3^2/(2×9.8) = 17.086 m answer
b) Again,
H = v^2/2g
= 1.81^2/(2×9.8) = 0.1671 m
two resistors, 5.0 ohm's each can be combined to give an equivalent resistance of
Answer:
2 possible answers:
1# 2.5 Ω (when the resistors are in parallel)
2# 10 Ω (when the resistors are in series)
Explanation:
there are two possible answers for this:
1# if the resistors are in parallel in the circuit
then:
1/R-equivalent=1/5+1/5
1/R-equivalent=2/5
R-equivalent=5/2=2.5 Ω
2# if the resistors are in series in the circuit
then:
R-equivalent=5+5
R-equivalent=10 Ω
Two resistors, 5.0 ohm's each can be combined to give an equivalent resistance of
If connected in series :
R = R1 + R2
R = 5 + 5
R = 10 ohms
If connected in parallel :
R = 1/R1 + 1/R2
R = 1/ 5 + 1/5
= 2 / 5
= 2.5 ohms
What is equivalent resistance ?
"The equivalent resistance is where the aggregate resistance connected either in parallel or series is calculated." Essentially, the circuit is designed either in Series or Parallel. Electrical resistance shows how much energy one needs when you move the charges/current through your devices.
Know more about equivalent resistance here
https://brainly.com/question/13606415
#SPJ2
Suppose you design an apparatus in which a uniformly charged disk of radius R is to produce an electric field. The field magnitude is most important along the central perpendicular axis of the disk, at a point P at distance 2.00R from the disk. Cost analysis suggests that you switch to a ring of the same outer radius R but with inner radius R/2.00 . Assume that the ring will have the same surface charge density as the original disk. If you switch to the ring, by what percentage will you decrease the electric field magnitude at P?
Answer:
The electric field will be decreased by 29%
Explanation:
The distance between point P from the distance z = 2.0 R
Inner radius = R/2
Outer raidus = R
Thus;
The electrical field due to disk is:
[tex]\hat {K_a} = \dfrac{\sigma}{2 \varepsilon _o} \Big( 1 - \dfrac{z}{\sqrt{z^2+R_i^2}} \Big)[/tex])
[tex]\implies \dfrac{\sigma}{2 \vaepsilon _o} \Big ( 1 - \dfrac{2.0 \ R}{\sqrt{ (2.0\ R)^2+(R)^2}} \Big)[/tex]
Similarly;
[tex]\hat {K_b} = \hat {k_a} - \dfrac{\sigma}{2 \varepsilon_o} \Big( 1 - \dfrac{2.0 \ R}{\sqrt{(2.0 \ r)^2 + (\dfrac{R}{2}^2)}}\Big)[/tex]
However; the relative difference is: [tex]\dfrac{\hat {k_a} - \hat {k_b}}{\hat {k_a} }= \dfrac{E_a -E_a + \dfrac{\sigma}{2 \varepsilon_o \Big[1 - \dfrac{2.0 \ R}{\sqrt{(2.0 \ R)^2 + (\dfrac{R}{2})^2}} \Big] } } { \dfrac{\sigma}{2 \varepsilon_o \Big [ 1 - \dfrac{2.0 \ R}{\sqrt{ (2.0 \ R)^2 + (R)^2}} \Big] }}[/tex]
[tex]\dfrac{\hat {k_a} - \hat {k_b}}{\hat {k_a} }= \dfrac{1 - \dfrac{2.0}{\sqrt{(2.0)^2 + \dfrac{1}{4}}} }{1 - \dfrac{2.0 }{\sqrt{(2.0)^2 + 1}}}[/tex]
[tex]= 0.2828 \\ \\ \mathbf{\simeq 29\%}[/tex]
The head scale of a screw gauge contains 100 divisions and it's pitch is 1mm. what is the least count of the screw gauge
Answer:
0.01 mm
Explanation:
The least count of the screw gauge = pitch/number of divisions on circular scale
Pitch = 1 mm and number of divisions = 100
Substituting the values of the variables into the equation, we have
least count of the screw gauge = pitch/number of divisions on circular scale = 1 mm/100 = 0.01 mm
1:
This diagram shows four different dishes on the kitchen shelf.
tea cup
IN
2:
bowl
50 N
mug
10 N
plate
SON
3:
999
4
:
Which of these dishes has the least potential energy?
bowl
5:
plate
mug
6:
tea cup
Answer:
Bowl will have maximum potential energy
Explanation:
It is the bowl that will have maximum potential energy.
It is because potential energy is high when both height and mass of the object is high.
Here in this case the bowl has maximum weight with maximum height except the tea cup but the potential weight of cup will not make much impact as its weight is very low.
A washer is swung in a circle on a string as shown below. If the string
breaks which arrow shows the path the washer will take? *
Answer:
yabarrow
Explanation:
i think thats the name
do you think you will benefit from the discoveries of Archimedes’ and Pascal’s Principles?
Answer:
I hate to say it is a bit of the holiday but
a stone on the ground has zero energy why
Explanation:
it has no energy when considered with respect to earth ,as it has neither height (i e potential energy) nor velocity (i.e kinetic energy).
Two vehicles are approaching an intersection. One is a 2600 kgkg pickup traveling at 17.0 m/sm/s from east to west (the −x−x- direction), and the other is a 1300 kgkg sedan going from south to north (the +y−+y− direction at 24.0 m/sm/s ). Part A Find the xx -component of the net momentum of this system. pxpx = nothing kg⋅m/skg⋅m/s SubmitRequest Answer Part B Find the yy-component of the net momentum of this system. pypy = 0 kg⋅m/skg⋅m/s SubmitPrevious AnswersRequest Answer Incorrect; Try Again; 4 attempts remaining Part C What is the magnitude of the net momentum?
Answer:
a) the x-component of the net momentum is 44200 kgm/s [tex](-x)[/tex]
b) the y-component of the net momentum is 31200 kgm/s [tex](y)[/tex]
c) the magnitude of the net momentum is 54102.5 kgm/s
Explanation:
Given the data in the question;
a) x-component of the net momentum of this system.
the second vehicle ( sedan ) doesn't have momentum along x-axis, the momentum along x-axis is strictly contributed by the pick up
so;
Px = 2600 kg × 17.0 m/s [tex](-x)[/tex]
Px = 44200 kgm/s [tex](-x)[/tex]
Therefore, the x-component of the net momentum is 44200 kgm/s [tex](-x)[/tex]
b) y-component of the net momentum of this system
Also, momentum along y-axis is entirely provided by the sedan
Py = 1300 kg × 24.0 m/s [tex](y)[/tex]
Py = 31200 kgm/s [tex](y)[/tex]
Therefore, the y-component of the net momentum is 31200 kgm/s [tex](y)[/tex]
c) magnitude of the net momentum?
magnitude of the net momentum P = √( Px² + Py² )
so we substitute
P = √( (44200)² + (31200)² )
P = √( 2927080000 )
P = 54102.5 kgm/s
Therefore, the magnitude of the net momentum is 54102.5 kgm/s
Which conversion can take place in a transformer
A. An electric current into a magnetic field
B. Electric energy into mechanical energy
C. Mechanical energy into electric energy
D. A lower voltage into a higher voltage
Answer:
D. A lower Voltage into a higher
A knife thrower throws a knife toward a 300 g target that is sliding in her direction at a speed of 2.30 m/s on a horizontal frictionless surface. She throws a 22.5 g knife at the target with a speed of 40.0 m/s. The target is stopped by the impact and the knife passes through the target. Determine the speed of the knife (in m/s) after passing through the target.
Answer:
The speed of the knife after passing through the target is 9.33 m/s.
Explanation:
We can find the speed of the knife after the impact by conservation of linear momentum:
[tex] p_{i} = p_{f} [/tex]
[tex] m_{k}v_{i_{k}} + m_{t}v_{i_{t}} = m_{k}v_{f_{k}} + m_{t}v_{f_{t}} [/tex]
Where:
[tex] m_{k}[/tex]: is the mass of the knife = 22.5 g = 0.0225 kg
[tex] m_{t}[/tex]: is the mass of the target = 300 g = 0.300 kg
[tex] v_{i_{k}}[/tex]: is the initial speed of the knife = 40.0 m/s
[tex] v_{i_{t}} [/tex]: is the initial speed of the target = 2.30 m/s
[tex]v_{f_{k}}[/tex]: is the final speed of the knife =?
[tex] v_{f_{t}} [/tex]: is the final speed of the target = 0 (it is stopped)
Taking as a positive direction the direction of the knife movement, we have:
[tex] m_{k}v_{i_{k}} - m_{t}v_{i_{t}} = m_{k}v_{f_{k}} [/tex]
[tex] v_{f_{k}} = \frac{m_{k}v_{i_{k}} - m_{t}v_{i_{t}}}{m_{k}} = \frac{0.0225 kg*40.0 m/s - 0.300 kg*2.30 m/s}{0.0225 kg} = 9.33 m/s [/tex]
Therefore, the speed of the knife after passing through the target is 9.33 m/s.
I hope it helps you!