Conservation of matter means that:
55
Matter is never created nor destroyed.
Matter is always created and destroyed.
Matter always turns into energy
Matter is flexible, it can be created destroyed, or turned into energy
Answer:
Matter is never created or destroyed
Which of the following is not a reason for extinction?
a change in climate
a change in predation rate
the ability to breed successfully
loss of habitat
Answer:
the ability to breed successfully
Explanation:
Answer:
the ability to breed successfully
Explanation:
the more offspring's an organism has, the less chance of extinction would happen. I hope that helped bestie
help me get this right
Answer:I’m 100% it’s the second one
Explanation:
I have done it before and missed one but not this question
HELPPPPPP!!!! ILL MARK YOU BRAINLIEST!
A cube has a mass of 100g and each side is 5cm. What is its density?
Given a gas with an initial volume of 3.0 L and a temperature of 290 K, what is the final volume if the
temperature is 273 K?
Plzzz neeed this really quick
Answer:
2.8l
Explanation:
just make v2 de subject
How much 2 M HBr is needed to neutralize 380 mL of 0.1 M NH4OH?
Answer:
19ml
Explanation:
trust me
is the answer A or B?
Answer:
Letter DHope I helped!♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥ ♥
2H2 + O2 → 2H2O
"PLEASE HELP ASAP"
Which of the following statements would be correct if one mole of hydrogen was used in this reaction? (5 points)
One mole of oxygen was used in this reaction.
Two moles of oxygen were used in this reaction.
One mole of water was produced from this reaction.
Two moles of water were produced from this reaction.
Answer:
- One mole of oxygen was used in this reaction.
- Two moles of water were produced from this reaction.
Explanation:
In addition: - Two moles of hydrogen were used.
Given the data from the question, the correct statement is:
One mole of water, H₂O was produced from the reaction Basic conceptTo know which options are correct, we shall determine the number of mole of O₂ used and the number of mole of H₂O produced.
How to determine the mole of O₂ usedBalanced equation
2H₂ + O₂ —> 2H₂O
From the balanced equation above,
2 moles of H₂ required 1 mole of O₂
Therefore,
1 mole of H₂ will require = 1 / 2 = 0.5 mole of O₂
Thus, 0.5 mole of O₂ is needed for the reaction
How to determine the mole of H₂O producedFrom the balanced equation above,
2 moles of H₂ reacted to produce 2 moles of H₂O
Therefore,
1 mole of H₂ will also react to to produce 1 mole of H₂O
Thus, 1 mole of H₂O was produced from the reaction.
SUMMARY
When 1 mole of H₂ was used in the reaction,
0.5 mole of O₂ was used 1 mole of H₂O was producedConsidering the options given in the question above, the correct statement is:
1 mole of H₂O was producedLearn more about stoichiometry:
https://brainly.com/question/14735801
During a phase change, such as melting or boiling, the kinetic energy __. Highlight correct answer
Answer: During a phase change, such as melting or boiling, the kinetic energy increases.
Explanation:
Kinetic energy is the energy obtained by the molecules of a substance due to their motion.
When phase change such as melting or boiling takes place then it means heat is absorbed by the substance. As a result, their molecules more even more rapidly from one place to another due to which more number of collisions take place.
Hence, a change in phase of substance occurs as kinetic energy increases in melting or boiling process.
Thus, we can conclude that during a phase change, such as melting or boiling, the kinetic energy increases.
plz help me get it right and no links
Answer:
get what right?
Answer:
You didn't post the question.
Explanation:
Edit your question and I'll try to help you.
Hope this helped? Lol.
what do you call the materials in which electricity pass easily?
a. insulator
b. conductors
c. non conductors
d. metallic
Answer:
Conductors
Explanation:
What is a cell? Please help
Explanation:
A cell is the membrane unit that contains all the fundamental molecules to living life. To make it short nd easy, a cell is the smallest nd basic unit of life, it's responsible for all life's processes. The human body is comped of m(tr)illions of cells, they all each provide different types of functions.
Please Answer all 4 questions and i will give brainliest!
You haven't added the 4 questions, so when you upload them, i'll answer.
Please help it’s my final
Which process is exothermic?
a) the vaporization of water b) the freezing of water c)the sublimation of dry ice d ) the boiling of liquid nitrogen
Answer:
Freezing of water
Explanation:
When water becomes a solid it releases heat into its surroundings (warming it up).
11 The cross section compares the densities of different Earth layers. Which Earth layer is most dense?
Answer:
b
Explanation:
i took the quiz
Question 1
A molecule contains carbon, hydrogen and oxygen. For every carbon atom there are
twice as many hydrogen atoms but the same number of oxygen atoms.
What is the formula of the molecule?
А
CH 0
B
C2H4O2
C
C,H,O2
D
C,H,O2
The required molecule is :
=》option B.) C2H4O2
it has 2 carbon atoms, 4 hydrogen atoms which it twice the number of carbon atoms and 2 oxygen atoms same as carbon.
A liquid-fueled rocket engine has two liquids, usually called the fuel and the oxidizer. Which two liquids are most commonly used for this propellant?
Answer:
A liquid-fueled rocket has two liquids (liquids are good because of the density, they need less space than a gas to be stored), such that these liquids are called the fuel and the oxidizer.
These liquids are injected into a system that leads to a combustion chamber, where the liquids are mixed (we need to mix the fuel with the oxidizer to enable the combustion of the fuel) and burned to produce thrust.
Some common examples of oxidizers are liquid oxygen, which may be combined with fuels like liquid hydrogen, liquid methane, kerosene and hydrazine.
Other oxidizers are liquid fluorine (which also can be combined with the fuels liquid hydrogen and hydrazine), nitrogen tetroxide (which can be combined whit kerosene, hydrazine and other fuels) and FLOX-70, which can only be combined with kerosene.
The "most commonly used" may depend on the country and the type of liquid propellant ( petroleum, cryogens, and hypergols)
Such that the most common oxidizer may be liquid oxygen, and the most common fuel the kerosene.
May someone assist, please...? I don't know how to do chemistry work...
1) How many mL of 5.00M CaSO4 solution must be
diluted with water to prepare 500.0 mL of 0.900M CaSO4?
2) 20.0 mL of a stock solution of NaOH is diluted with water to prepare 150.0mL of 1.50 M NaOH solution.
Calculate the Molarity of the stock NaOH solution?
3) 12.00 mL of 3.50 M NaOH solution is diluted with 88.0 mL of water.
What is the concentration of sodium hydroxide in the diluted solution?
4) 9.0 mL of 8.0 M HCl solution is diluted with water to prepare 0.50 M HCl solution. What is the final volume of this solution?
Answer:
1) 90.0 mL
2) 11.25 M
3) 0.477 M
4) 144 mL
Explanation:
The main formula that will be used for all these calculations is:
C₁V₁ = C₂V₂
C stands for concentration and V stands for volume and the subscripts 1 and 2 indicate an initial concentration or volume and a final concentration or volume.
For each problem, it's best to start by figuring out what you have and what you need to find. Figure out if you're looking for an initial value or a final value.
1) We need to find the initial volume. So, take what values you have and plug them in and then solve for whatever variable:
5.00 M · V₁ = 500.0mL · 0.900 M - divide by 5.00
C₁ = 90.0 mL
2) This time we're finding the initial concentration:
20.0mL · C₁ = 150.0mL · 1.50 M - divide by 20.0mL
C₂ = 11.25 M
3) Now we're finding the final concentration:
12.00mL · 3.50 M = 88.0mL · C₂ - divide by 88.0mL
C₂ = 0.477 M
4) Finally, we're looking for the final volume:
9.0mL · 8.0 M = 0.50 M · V₂ - divide by 0.50 M
V₂ = 144mL
Molecules are always in motion. True False
Answer: FALSE
Explanation:
Li + H2O + LiOH + H2
How do I balance this?
Answer:
2Li + 2H2O → 2LiOH + H2
Explanation:
Lithium + Water = Lithium Hydroxide + Dihydrogen
B) A company president would like to offer a 4.00 L cylinder containing 500 g of chlorine in the new catalog. The cylinders you have on hand have a rupture pressure of 40 atm. Use both the ideal gas law and the van der Waals equation to calculate the pressure in a cylinder at 25°C. Given a = 6.58 L2 atm mol-2 and b = 0.056 L mol-2, Cl =35.5. (5 marks)
Answer:
43.1atm is the pressure using gas law and 27.2atm using Van der Waals Law.
Explanation:
Ideal gas law is:
PV = nRT
Where P is pressure in atm
V is volume = 4.00L
n are moles of the gas (For chlorine Molar Mass: 70.90g/mol):
500g * (1mol / 70.90g) = 7.052 moles
R is gas constant = 0.082atmL/molK
T is absolute temperature = 25°C + 273 = 298K
To solve the pressure, P:
P = nRT/V
P = 7.052mol*0.082atmL/molK*298K / 4.00L
P = 43.1atm is the pressure using gas law.
Van der Waals equation is:
[tex]P + a(\frac{n}{V})^2 * (V-nb) = nRT[/tex]
Where a is 6.58L²atm*mol⁻²
b = 0.056Lmol⁻²
Solving for pressure:
[tex]P + a(\frac{n}{V})^2 = \frac{nRT}{(V-nb)}[/tex]
[tex]P = \frac{nRT}{(V-nb)}-a(\frac{n}{V})^2[/tex]
[tex]P = \frac{7.052mol*0.082atmL/molK*298K}{(4.00L-7.052mol*0.056L*mol)}-6.58L^2mol^{-2}(\frac{7.052mol}{4.00L})^2[/tex]
P = 172.323 / 3.6051 - 20.4866
P = 27.2atm using Van der Waals Law
What is the molecular formula for this molecule? a
Answer:
In a molecular formula, it states the total number of atoms of each element in a molecule.
Explanation:
What is the standard cell notation of a galvanic cell made with zinc and gold?
A. Zn2+(aq) | Zn(s) || Au(s) | Au+(aq)
B. Au(s)| Aut(aq) || Zn2+(aq) | Zn(s)
C. Aut (aq)| Au(s) || Zn(s) | Zn2+(aq)
D. Zn(s) | Zn2+ (aq) || Aut(aq) | Au(s)
Answer:
D
Explanation:
Will give brainliest please help!!
Answer:
D. The energy level of the electron.
Explanation:
There are four quantum numbers which are used to describe the movement and paths or positon of each electron within an atom. Quantum numbers can be used to determine the electronic configuration of atoms and the most likely location of the atom's electrons. Quantum numbers are also used in determining other characteristics of atoms, such as ionization energy and the atomic radius.
The four quantum numbers are namely, principal, azimuthal, magnetic and spin quantum numbers.
Principal quantum numbers are denoted by the symbol ‘n’. They describe the principal electron shell or energy level the atom.The value of the principal quantum number are positive integer values that is equal to or greater than one. The value n = 1 represents the innermost electron shell of an atom, which corresponds to the lowest energy state of an electron. The larger the values of 'n' the greater the energy level and the farther the electron is from the nucleus.
Which model shows a way that large molecules can enter a cell without using the cell's energy? Outside the cell O A Cell membrane Vacuole 1 2 Inside the cell В.
Answer:
its B
Explanation:
I took the test and its that passage way thing. (tell me if this works for you! it will but just wanna make sure!)
What relates moles of 1 substance to another in a chemical reaction?
Answer:
Chemical reactions list reactants and products in molar amounts, not just molecular amounts. We can use the coefficients of a balanced chemical equation to relate moles of one substance in the reaction to moles of other substances
Explanation:
Help me get it right and no links
Answer:
i think the second answer " fish migration might be prevented" might possibly be your answer
who discovered electron
Answer: Electricity
Answer:
J.J Thomas in 1897
How many hydrogen atoms are present in an alkyne with 5 carbon atoms?
Answer:
cuatro
Explanation:
ino->4
Alkynes are triple bonded hydrocarbons. There are 7 hydrogen in an alkyne with 5 carbon atoms. This compound can be named as pentyne.
What are alkynes?Alkynes are hydrocarbons with one triple bond between two carbon atoms. alkynes are unsaturated compounds. Alkynes are named with the suffix 'yne' like ethyne, propyne etc..
There are three types of hydrocarbons namely, alkanes, alkenes and alkynes. Alkanes are saturated hydrocarbon having single bond between carbon atoms. Eg. methane , ethane etc all having suffix of 'ane'. Alkenes are unsaturated hydrocarbons with double bond between two or more carbon atoms.
Alkenes are named with the suffix 'ene'. Hence, the names become ethene, propene etc. The prefix for the names of hydrocarbons is based on the number of carbons. meth for 2, eth for 2 prop for 3, but for 4 and pent for 5 and so on.
The valency of carbon is 4 and it will bind to four other atoms. When it forms triple bond with a carbon it can bind to one hydrogen only. If it is a middle carbon then it dont have a hydrogen since either side will be carbons.
Thus for a 5 carbon alkyne, there will be total 7 hydrogens and the compound is pentyne.
To find more on pentyne, refer here:
https://brainly.com/question/15022928
#SPJ6