How many moles of helium are needed to fill a balloon to a volume of 6.3 L at 28 °C and 320
mmHg?
Round answer to 0.01 decimals
Answer:
.11 mol
Explanation:
Convert mmHg to atms by dividing by 760. Then multiply 6.3 by the atms and divide by .08206*(273+28) to get mol
How many grams of carbon dioxide gas are in a 1.0 L balloon at STP?
0.509 g
1.96 g
22.4 g
44.0 g
Answer:
I'm pretty sure its 1.96g
Add labels for mass extinction and adaptive radiation:
Answer:
Couldn't figure out how to edit the other one to attach the image, but here is it with the labels. Also put the same explanation down below so you don't have to go to the other if you wanted to look at it in conjunction with the image.
Explanation:
Mass extinctions are periods of time where the organisms are essentially wiped out in an extremely brief period of time. You can see how the species just drops off. Adaptive radiation occurs when there is a diversification of a group of organisms as evident by the rise in the number of marine animal groups shown by the bracketed area.
What method can be used to separate benzoic acid and potassium carbonate
Answer:
To separate the components, a water wash may be attempted to remove benzoic acid, but benzoic acid is not particularly water-soluble due to its nonpolar aromatic ring, and only small amounts would be extracted into the aqueous layer
The method that can be used to separate Benzoic acid and potassium carbonate is : The application of water wash separation method
Benzoic acid is slightly soluble in cold water but becomes more soluble as the temperature of water is increased. Water wash separation method is a methodology used for the selective removal of unwanted compounds in a mixture.
Separation method based on solubility water wash methodprecipitationThe separation of benzoic acid and potassium carbonate is based on the solubility differences between Benzoic acid and potassium carbonate when dissolved in a solvent ( water ) therefore the water wash separation method is the most effective method.
Hence we can conclude that The method that can be used to separate Benzoic acid and potassium carbonate is : The application of water wash separation method.
Learn more about separation methods : https://brainly.com/question/735172
2C2H6 + 7O2 ------> 4CO2 + 6H2O
If you are given 10 grams of C2H6 and 10 grams of O2 how many grams of H2O would you produce? Hint: find the limiting reactant. Answer should have 3 decimal places.
Right answer gets brainliest
We convert the masses of our reactants to moles and use the stoichiometric coefficients to determine which one of our reactants will be limiting.
Dividing the mass of each reactant by its molar mass:
(10 g C2H6)(30.069 g/mol) = 0.3326 mol C2H6
(10 g O2)(31.999 g/mol) = 0.3125 mol O2.
Every 2 moles of C2H6 react with 7 moles of O2. So the number of moles of O2 needed to react completely with 0.3326 mol C2H6 would be (0.3326)(7/2) = 1.164 mol O2. That is far more than the number of moles of O2 that we are given: 0.3125 moles. Thus, O2 is our limiting reactant.
Since O2 is the limiting reactant, its quantity will determine how much of each product is formed. We are asked to find the number of grams (the mass) of H2O produced. The molar ratio between H2O and O2 per the balanced equation is 6:7. That is, for every 6 moles of H2O that is produced, 7 moles of O2 is used up (intuitively, then, the number of moles of H2O produced should be less than the number of moles of O2 consumed).
So, the number of moles of H2O produced would be (0.3125 mol O2)(6 mol H2O/7 mol O2) = 0.2679 mol H2O. We multiply by the molar mass of H2O to convert moles to mass: (0.2679 mol H2O)(18.0153 g/mol) = 4.826 g H2O.
Given 10 grams of C2H6 and 10 grams of O2, 4.826 g of H2O are produced.
When(NH4)2SO4(aq) and Ba(NO3)2(aq) react
Answer:
1 (NH4)2SO4 + Ba(NO3)2 → NH4NO3 + BaSO4
2 (NH4)2SO4 + Ba(NO3)2 → Ba(SO4) + (NH4)(NO3)
Explanation:
3. Lemon juice is an acid. What ion is present in lemon juice that
makes it an acid?
Lemon is an acidic fruit with a pH ranging 2 to 3. The acid in lemons are citric acid which makes lemon tart, which is Vitamin C.
When this gas is burned what will happen to the surface of this type of star?
3. Add labels for mass extinction and adaptive radiation:
Answer:
I'm assuming you need to label above the lines. So, above the line where the Cretaceous period ends is mass extinction and where the bracket lies is adaptive radiation.
Explanation:
Mass extinctions are periods of time where the organisms are essentially wiped out in an extremely brief period of time. You can see how the species just drops off. Adaptive radiation occurs when there is a diversification of a group of organisms as evident by the rise in the number of marine animal groups shown by the bracketed area.
Where are cardiac muscles used? Are they voluntary?
Answer:
Heart
Not voluntary.
Explanation:
The heart is made up of special muscle called the cardiac muscle that contains interconnected muscle fibres which are supplied with blood through the coronary artery. Also so that the waves of contraction can travel throughout the mass of the muscle.
Answer:
Cardiac muscle is in the heart.
No, they are not voluntary.
(01.06 LC)
Which statement is true about the substances present in a mixture?
They always consist of the same element.
They are always in the same state of matter.
They can be separated by physical methods.
They can only be separated by chemical methods.
Answer:
They can be separated by physical methods.
Explanation:
Substances in a mixture are not subjected to anything that may change their chemical structure, so they are physical all throughout the process. Therefore, they can be separated using physical methods.
Answer:
They can be separated by physical methods.
Explanation:
I took the final
I need help with this :/
Answer:
Blank 1: 1
Blank 2: 2
Blank 3: 1
Blank 4: 1
Explanation:
Assuming this is to balance the equation, write out the amount of each element you have on the reactants side and on the products side
Reactants Products
Ca 1 Ca 1
C 2 C 2
H 2 H 4
O 1 O 2
Comparing the two, we can see that hydrogen and oxygen have different amounts between reactants and products. Therefore, we need to multiply by some number to get the two equal. If we multiply the reactants by 2 we will get the correct amount in the products. So we put a 2 in front of the H₂O to signify this.
The balanced chemical reaction is
CaC₂ + 2 H₂O --> C₂H₂ + Ca(OH)₂
Please help. Which of these are chemical or physical change?
Answer:
Explanation:
a is a physical change you could put the peices back together
b is a chemical change because you cant unburn wood
c is a chemical change because you cant unbake it
d is a physicl change you could te your time and unmix it
What are two different forms of a single gene called?
A.
traits
B.
factors
C.
alleles <<<
D.
chromosomes
Two different forms of a single gene are called 'alleles
Luisa likes to drink water from a plastic bottle. She knows the bottles were formed from synthetic polymers that were created in a chemical reaction. She also knows that synthetic materials can cause problems. Which statement explains the kind of problem that can develop from using synthetic materials such as plastics?
Complete question: Luisa likes to drink water from a plastic bottle. She knows the bottles were formed from synthetic polymers that were created in a chemical reaction. She also knows that synthetic materials can cause problems. Which statement explains the kind of problem that can develop from using synthetic materials such as plastics?
a) plastics have changed the way people use materials
b) plastics have made the lives of people easier
c) plastics have contributed to more pollution
d) plastics have made more work for people
Answer: The correct statement is plastics have contributed to more pollution. Option C.
Explanation:
Synthetic polymers are commonly called plastics. These are referred to as synthetic materials which can be softened by heat or pressure and then moulded into any desirable shape like the the plastic bottle Luisa drank from.
The raw materials for the manufacture of plastics are readily and cheaply available for the refinement of crude oil through series of chemical reactions. They are made by polymerization of monomers which are derived from petrochemicals.
Although they are used in producing materials used daily, it has contributed to more pollution over the years. POLLUTION is the release of chemicals or substances through man's activities, into the environment which causes harm to both man and the environment.
Plastics have contributed to more pollution because most plastics are non- biodegradable and cannot be broken down by microbial action into simple inorganic forms. Therefore, they cause severe land pollution problems since they are not easily disposable. Also is poses a major problem to the world supply of crude oil as it's limited. This is as a result of heavy dependence on crude oil which provides petrochemicals that is the bulk of the raw materials needed for making plastics.
PLZ HELP IM CONFUSED
How many moles of methanol would be created if you started the reaction with 36.7 g of hydrogen gas?
(Round to 1 decimal place.)
Molar Masses:
H2= 202 g/mol
CO = 28.01 g/mol
CH3OH = 32.04 g.mol
Answer:
9.1 mol
Explanation:
The balanced chemical equation of the reaction is:
CO (g) + 2H2 (g) → CH3OH (l)
According to the above balanced equation, 2 moles of hydrogen gas (H2) are needed to produce 1 mole of methanol (CH3OH).
To convert 36.7 g of hydrogen gas to moles, we use the formula;
mole = mass/molar mass
Molar mass of H2 = 2.02g/mol
mole = 36.7/2.02
mole = 18.17mol
This means that if;
2 moles of H2 reacts to produce 1 mole of CH3OH
18.17mol of H2 will react to produce;
18.17 × 1 / 2
= 18.17/2
= 9.085
Approximately to 1 d.p = 9.1 mol of methanol (CH3OH).
Explain why only one type of seismic wave was recorded at location B. (1 sentence only!)
Answer:
p wave
Explanation:
The P wave is designated the primary preliminary wave because it is the first to arrive at a seismic station after an earthquake. It travels at a speed usually less than 6 kilometers per second in the Earth's crust and jumps to 13 kilometers per second through the core.
If 25.0 g of iron(III) phosphate reacts with excess sodium sulfate, how many molecules of sodium phosphate can be made?
Answer:
so mucjsuat least amount of soduim is will be 25percent
8. What is a compound?
A. a substance in which the atoms of three or more elements are combined together
B. an atom with more electrons than protons
C. a substance in which the atoms of two or more elements are combined together
D an atom with more neutrons than protons
Answer:
c
Explanation:
Determine the mass of ammonium chloride, NH4CI, required to prepare 0.250 L of a 0.35 M solution of ammonium chloride.
Where is the youngest part of the ocean floor found?
A. along the deep sea trenches
B. where ocean sediments are the thickest
C. near ocean ridges
D. where Earth's magnetic field changes polarity
Answer:
the youngest crust of the ocean floor can be found near the seafloor
Evaluate three communication skills that can assist you in sustaining positive relationships
1. Accept and celebrate differences. One of the biggest challenges we experience in relationships is that we are all different. We can perceive the world in many ways. Certainly astumbling block that we come across when we try to build relationships is a desire or an expectation that people will think like we do and, in this way, it is so much easier to create a rapport. We feel more comfortable when we feel that people “get” us and can see our point of view. Life, however, would be very dull if we were all the same and, while we may find it initially easier, the novelty of sameness soon would wear off. So accepting and celebrating that we are all different is a great starting point.
2. Listen effectively. Listening is a crucial skill in boosting another person’s self-esteem, the silent form of flattery that makes people feel supported and valued. Listening and understanding what others communicate to us is the most important part of successful interaction and vice versa.
Active or reflective listening is the single most useful and important listening skill. In active listening, we also are genuinely interested in understanding what the other person is thinking, feeling, wanting, or what the message means, and we are active in checking out our understanding before we respond with our own new message. We restate or paraphrase our understanding of their message and reflect it back to the sender for verification. This verification or feedback process is what distinguishes active listening and makes it effective.
3. Give people your time. Giving time to people is also a huge gift. In a world where time is of the essence and we are trying to fit in more than one lifetime, we don’t always have the time to give to our loved ones, friends, and work colleagues. Technology has somewhat eroded our ability to build real rapport and we attempt to multi-task by texting and talking at the same time.
Being present in the time you give to people is also important, so that, when you are with someone, you are truly with someone and not dwelling in the past or worrying about the future. The connection we make with other people is the verytouchstone of our existence, and devoting time, energy, and effort to developing and building relationships is one of the most valuable life skills.
n E Which is the electron configuration for zinc? O 1s22s22p3s23p64s23d8 O 1s22s22p 3s 3p64s+3d10 01s 2s 2p 3s 23p64523d10 0 1522s 2p 3s23p64533d10
The electronic configuration is used to explain the orbitals of an atom and it helps to determine the physical and chemical properties of the elements. The electronic configuration of zinc is 1s²2s²2p⁶3s²3p⁶4s²3d¹⁰. The correct option is C.
What is electronic configuration?The distribution of electrons in the atomic orbitals is given by the electronic configuration. It is a standard notation in which all the electrons holding atomic subshells are arranged in a sequence. Each element has a unique electronic configuration.
The electronic configuration of an element can be written in two ways, in standard notation, and in condensed form. In the case of elements with larger atomic numbers, the electronic configuration becomes lengthy in standard notation. So in such cases condensed form is generally used.
In condensed form electronic configuration of zinc is [Ar] 3d¹⁰4s² and in standard form it is 1s²2s²2p⁶3s²3p⁶4s²3d¹⁰.
Thus the correct option is C.
To know more about electronic configuration, visit;
https://brainly.com/question/19589767
#SPJ7
Which of the following is the correct arrangement of energy transformation in a musical christmas light
Answer:
heat energy light energy sound energy
Explanation:
pa follo
As you move from left to right within a period (row), what is the pattern?
If we use 18 moles of H2 how many moles of H2O do we make? Use this chemical equation: 6H2 + O2 → 3H2O
9 mol H₂O
General Formulas and Concepts:Math
Pre-Algebra
Order of Operations: BPEMDAS
BracketsParenthesisExponentsMultiplicationDivisionAdditionSubtractionLeft to RightChemistry
Atomic Structure
Reading a Periodic TableMolesAvogadro's Number - 6.022 × 10²³ atoms, molecules, formula units, etc.Stoichiometry
Using Dimensional AnalysisAnalyzing reactions RxNExplanation:Step 1: Define
[RxN - Balanced] 6H₂ + O₂ → 3H₂O
[Given] 18 mol H₂
[Solve] mol H₂O
Step 2: Identify Conversions
[RxN] 6 mol H₂ → 3 mol H₂O
Step 3: Stoich
[DA] Set up conversion: [tex]\displaystyle 18 \ mol \ H_2(\frac{3 \ mol \ H_2O}{6 \ mol \ H_2})[/tex][DA] Simplify: [tex]\displaystyle 18 \ mol \ H_2(\frac{1 \ mol \ H_2O}{2 \ mol \ H_2})[/tex][DA] Divide [Cancel out units]: [tex]\displaystyle 9 \ mol \ H_2O[/tex]Answer:
9 mol H₂O
give me brainliest pls
In a unit circle, ø = pi radians What is the terminal point? A. (1,0) B. (0,-1) C. (0,1) D. (-1,0)
Answer:
(-1,0)
Explanation:
Long scratch marks that are left behind as evidence of glaciers are called
A. striations
B. cirques
C. fjords
D. roche moutonnees
Answer:
it is A striations
Explanation:
..........
Answer:
Striation
Explanation:
A light bulb has a resistance of 96.8 Ω. What current flows through the bulb when it is connected to a 120 V source of electrical energy?
Answer:
I = 1.23 A
Explanation:
Given that,
The resistance of the lightbulb, R = 96.8 Ω
Voltage, V = 120 V
We need to find the current flows through the lightbulb. Let the current be I. We can use the ohm's law to find it i.e.
[tex]V=IR\\\\I=\dfrac{V}{R}\\\\I=\dfrac{120}{96.8}\\\\I=1.23\ A[/tex]
So, the current flows through the bulb is 1.23 A.
How much heat is required to raise the temperature of 250.0 g of mercury by 52 degrees * C with a specific heat of 4.18
To raise the temperature of 250.0 g of mercury by 52°C with a specific heat capacity of 4.18 J/ g°C the heat required is 5.434×10¹ kJ.
What is specific heat capacity ?For a substance, it's specific heat capacity is the amount of energy required to raise the temperature of unit mass of that substance by 1°C.
If, specific heat capacity (c) = 4.18 J/ g°C
Mass of the substance (m) = 250.0 g
Change in temperature (ΔT) = 52°C
Energy (Q) = ?
Then mathematically the relation could be represented as
c = [tex]\frac{Q}{ \ m \ (\Delta\ T )}[/tex]
Therefore, [tex]Q = m\times c \times (\Delta\ T)[/tex]
[tex]Q = 250 \times 4.18 \times 52[/tex]
[tex]Q = 54,340 J\\Q = 5.434 \times 10^1 kJ[/tex]
So, to raise the temperature of 250.0 g of mercury by 52°C with a specific heat capacity of 4.18 J/ g°C the heat required is 5.434×10¹ kJ.
To know more on specific heat capacity, click on
https://brainly.com/question/27991746
#SPJ2