154.42g of oxygen gas (O2) react with an excess of ethane (C2H6) produces how many moles of water vapor (H2O)?

Electrolysis is a process that is used to electric current is passed in a solution. The mass of cu(s) is electroplated by running 23.0 a of current through a cu2 (aq) solution for 4.00 h is equals to 64 grams.

Electrolysis is a process in which an electric current is passed in a solution. Solving electrolysis problem is more on stoichiometric calculations are, coulombs = amperes x time

1 Faraday = 96,485 coulombs

1 Faraday = 1 mole of electrons

We have to determine the mass of cu(s) is electroplated by running 23.0 a of current through a Cu (aq) solution for 4.00 h. Half reaction, [tex]Cu^{2+ } + 2e^{-} --> Cu[/tex]

Current, I = 23.0 A

Time, t = 4 hours = 4 × 3600 seconds

= 14400 seconds

Calculate the moles of Copper, n=Q ×z× F

where, Q = total charge in coulombs

Computing for Q = 13.5coulomb sec (14,400 sec) = 194,400 coulomb-sec²

So, n = 194,400 coulomb-s² /(96485 coulomb)

= 1.007 moles Cu

Molar mass = 63.55 grams per mole

Molar mass is defined as the mass of substance divided by moles of substance.

=> 63.55 grams per mole = m/ 1.007 moles Cu

=> m = 63.55 g × 1.007

=> m = 64 grams

Hence, required value is 64 grams.

For more information about electrolysis, refer:

https://brainly.com/question/24063038

#SPJ4

The most common constituent of gas in the disk of the Milky Way galaxy is hydrogen gas.

Hydrogen gas is the most abundant element in the Milky Way galaxy, making up around 75% of its elemental mass. This is why hydrogen is often used as a tracer for studying the structure and dynamics of galaxies. The gas in the disk of the Milky Way is mostly composed of atomic hydrogen (H I) and molecular hydrogen (H2), with smaller amounts of other elements like helium and carbon. Studying the distribution and properties of this gas can provide insight into the formation and evolution of the Milky Way.

learn more about gas here

https://brainly.com/question/28549254

#SPJ11

The most common constituent of gas in the disk of the Milky Way galaxy is hydrogen gas.

The most common constituent of gas in the disk of the Milky Way galaxy is hydrogen. Hydrogen is the most abundant element in the universe and makes up the majority of the gas in the disk of the Milky Way galaxy, with its presence primarily in the form of atomic and molecular hydrogen.  It is often found in the form of molecular hydrogen ([tex]H_{2}[/tex]) in interstellar clouds, which are regions of gas and dust where stars are formed. Other common constituents of gas in the Milky Way galaxy's disk include helium (He), carbon (C), oxygen (O), nitrogen (N), and trace amounts of other elements.

To know more about Milky Way:

https://brainly.com/question/30417276

#SPJ11

Answer: NA = no of molecules / no of moles

NA = no of molecules × molecular weight /weight

Explanation:

The presence of an alcohol group (-OH) in a molecule, compared to the presence of a methyl group (-CH3), increases the ΔT value of a molecule.

The presence of an alcohol group (-OH) leads to the formation of hydrogen bonds, which are stronger than the van der Waals forces present in molecules with a methyl group (-CH3). As a result, more energy is required to break these hydrogen bonds, leading to a higher ΔT value (a greater change in temperature during phase transitions).

Therefore the correct answer is A. increases.

To learn more about alcohol, refer:-

https://brainly.com/question/16975086

#SPJ11

2,3-dimethylbuta-1,3-diene is not a structural isomer of hexyne. Option e is correct.

Structural isomers are molecules with the same chemical formula but different arrangements of atoms. Hexyne is a hydrocarbon with six carbon atoms and one triple bond. Option (e), 2,3-dimethylbuta-1,3-diene, is not a structural isomer of hexyne because it has a different number of carbon atoms and a different type of bond. It has four carbon atoms and two double bonds, whereas hexyne has six carbon atoms and one triple bond.

Options (a), (b), (c), and (d) are all structural isomers of hexyne because they have the same number of carbon atoms and the same type of bond but different arrangements of atoms. Hence, option e is correct.

To know more about isomer, here

brainly.com/question/13422357

#SPJ4

The change of state described is melting (option C). In melting, the particles of a substance gain energy and change from a regular ordered structure to a disordered structure with large distances between the particles, which results in the substance changing from a solid to a liquid state.

Melting is a physical process in which a substance changes from its solid state to its liquid state. It occurs when a solid substance absorbs enough heat energy to overcome the forces of attraction between its particles, causing the particles to move faster and become less ordered.

As a result, the substance loses its definite shape and takes the shape of the container in which it is placed, while retaining its volume. The temperature at which a substance melts is known as its melting point.

An example of melting is the melting of ice. At the melting point of water, which is 0°C (32°F) at standard pressure, ice changes from its solid state to its liquid state. The resulting liquid water takes the shape of its container, such as a glass, but still has the same volume as the ice from which it was melted.

Learn more about melting here:

https://brainly.com/question/15873508

#SPJ9

The volume of the gas when the temperature drops to 270 K and the pressure is 150 N/cm², is 135 cm³

The following data were obtained from the question.

The new volume of the gas can be obtained by using the combined gas equation as illustrated below:

P₁V₁ / T₁ = P₂V₂ / T₂

(100 × 225) / 300  = (150 × V₂) / 270

Cross multiply

300 × 150 × V₂ = 100 × 225 × 270

Divide both side by (300 × 150)

V₂ = (100 × 225 × 270) / (300 × 150)

V₂ = 135 cm³

Thus, the volume of the gas is 135 cm³

Learn more about volume:

https://brainly.com/question/14560487

#SPJ1

The outcomes to the scan had been now not all similar. The pots with the pH of 5.0 had no growth whatsoever. The pots with the pH of 6.0 had little growth, each with only four blades of grass. The pots with a pH of 7.0 grew well, one pot with extra blades of grass than the other, an average of 11 blades of grass

Natural soil pH depends on the rock from which the soil was once fashioned (parent material) and the weathering procedures that acted on it—for instance climate, vegetation, topography and time. These approaches have a tendency to purpose a decreasing of pH (increase in acidity) over time.

There is disruption of nutrient absorption by way of the plants if it's pH increases, and hence, soil fertility is reduced, alkaline soil's pH does not lead to make bigger in nutrient absorption, soil illness does not happen.

Learn more about  effect of pH on plant growth here:

The sigma bond between b and f in tetrafluoroborate ion, bf4-, is formed by the overlap of the atomic orbitals of boron and fluorine. Specifically, each of which contributes one p orbital to form a sp3-p sigma bond.

In the tetrafluoroborate ion (BF4-), the bond between boron (B) and fluorine (F) is a sigma (σ) bond. The σ bond is formed by the overlap of atomic or hybrid orbitals.Boron in BF4- is sp3 hybridized, which means that it has four hybrid orbitals that are involved in bonding. Three of these hybrid orbitals are involved in bonding with three of the fluorine atoms, while the fourth hybrid orbital is used to form the σ bond with the fourth fluorine atom.Fluorine is a halogen and has the electron configuration of 1s2 2s2 2p5. In BF4-, each of the fluorine atoms is also involved in the formation of the σ bond with boron. Fluorine has three unpaired electrons in its 2p orbitals that can form a σ bond by overlapping with the sp3 hybrid orbital of boron.Therefore, the σ bond between boron and fluorine in BF4- is formed by the overlap of the sp3 hybrid orbital of boron and the 2p orbital of the fluorine atom.

Learn more about fluorine here

https://brainly.com/question/1940697

#SPJ11

The term defined as a pollutant that is formed by a chemical reaction between a primary pollutant and another compound in the atmosphere (either natural or human-made) is "secondary pollutant".

Primary pollutants are directly emitted into the atmosphere from sources such as cars, factories, and power plants. Examples of primary pollutants include carbon monoxide (CO), sulfur dioxide (SO₂), and nitrogen oxides (NOₓ).

Secondary pollutants, on the other hand, are not directly emitted into the atmosphere, but are formed through chemical reactions between primary pollutants and other compounds in the atmosphere. Examples of secondary pollutants include ground-level ozone (O₃), which is formed through the reaction of NOₓ and volatile organic compounds (VOCs), and acid rain, which is formed through the reaction of SO₂ and NOₓ with water, oxygen, and other chemicals in the atmosphere.

The formation of secondary pollutants is often dependent on factors such as temperature, sunlight, and the presence of other chemicals in the atmosphere. Secondary pollutants can be just as harmful to human health and the environment as primary pollutants, and are an important consideration in air pollution control strategies.

To learn more about pollutants, here

https://brainly.com/question/28519286

#SPJ4

Yes, the reaction worked. Three key signals that suggest the reaction worked include the appearance of the product, the presence of the expected starting material, and the absence of any other byproducts.

The product, 1-methoxy-2-chloro-4-nitrobenzene, can be identified by its distinct color, smell, and boiling point. Additionally, if the expected starting material is present, then it shows that the reaction has taken place.

Lastly, the absence of any other byproducts such as unreacted starting material implies that the reaction was successful. All together, all three signals indicate that the reaction worked.

Know more about Three key signals here

https://brainly.com/question/31114075#

#SPJ11

when molten CaF2 is electrolyzed by a current of 9.55 A for 19 h, approximately 136 g of calcium metal is produced.

To determine the mass of calcium produced when molten CaF2 is electrolyzed by a current of 9.55 A for 19 h, we'll use Faraday's Law of Electrolysis.

First, calculate the total charge passed through the electrolyte:
Charge (Q) = Current (I) × Time (t)
Q = 9.55 A × (19 h × 3600 s/h) = 653,940 C

Next, determine the number of moles of electrons (n):
n = Q / (Faraday constant F)
n = 653,940 C / (96,485 C/mol) ≈ 6.77 mol

The balanced equation for the electrolysis of CaF2 is:
2F- → F2 + 2e-
Ca2+ + 2e- → Ca

The mole ratio between calcium and electrons is 1:2. So, the number of moles of calcium produced is:
Moles of Ca = 0.5 × Moles of electrons
Moles of Ca = 0.5 × 6.77 mol ≈ 3.39 mol

Finally, calculate the mass of calcium:
Mass of Ca = Moles of Ca × Molar mass of Ca
Mass of Ca = 3.39 mol × 40.08 g/mol ≈ 136 g

To learn more about : calcium

https://brainly.com/question/29231164

#SPJ11

The answer is (C) HS.

Each of the other options can donate a proton (act as a Brönsted acid) in certain conditions and accept a proton (act as a Brönsted base) in other conditions. However, HS is only capable of acting as a Brönsted base and accepting a proton, but it cannot donate a proton and act as a Brönsted acid.

Out of the given options, the one that cannot act as both an acid and a base is (C) HS. This is because HS can only act as a brönsted acid by donating a proton to a brönsted base, but it cannot act as a brönsted base by accepting a proton from a brönsted acid. This is because it lacks a lone pair of electrons on the sulfur atom, which is necessary for accepting a proton.

On the other hand, [tex]HCO_{3}[/tex] ,[tex]NH_{4}[/tex]+, and [tex]H_{2}[/tex][tex]O_{4}[/tex]P can all act as both brönsted acids and bases depending on the reaction conditions.

Learn more about Brønsted acid here:

https://brainly.com/question/24065957

#SPJ11

(B) NH4⁺,  cannot act as both a Brønsted acid and a Brønsted base.

A Brønsted acid is a species that can donate a proton (H⁺), while a Brønsted base is a species that can accept a proton (H⁺).

(A) HCO3⁻ can act as an acid by donating a proton to form CO3²⁻ or as a base by accepting a proton to form [tex]H_{2}CO_{3}[/tex].
(C) HS⁻ can act as an acid by donating a proton to form S²⁻ or as a base by accepting a proton to form [tex]H_{2}S[/tex].
(D) H2PO4⁻ can act as an acid by donating a proton to form HPO4²⁻ or as a base by accepting a proton to form [tex]H_{3}PO_{4}[/tex].

However,
(B) NH4⁺ can only act as a Brønsted acid by donating a proton to form [tex]NH_{3}[/tex] but cannot act as a Brønsted base since it has no lone pair of electrons to accept a proton.

To know more about Bronsted Theory:

https://brainly.com/question/148529

#SPJ11

The correct expression for the equilibrium constant (Kc) for the reaction:
[tex]2Fe2O3(s) + 3C(s) ⇌ 4Fe(s) + 3CO2(g)[/tex] is:  [tex]Kc=[Fe]4[CO2]3/[Fe2O3]2[C]3[/tex]

The equilibrium constant expression for the given reaction, [tex]2Fe2O3(s) + 3C(s) ⇌ 4Fe(s) + 3CO2(g)[/tex]  is written as the ratio of the product concentrations raised to their respective coefficients divided by the reactant concentrations raised to their respective coefficients.

The ratio of the equilibrium concentrations of the products to the concentrations of the reactants raised to their respective powers to match the coefficients in the equilibrium equation at equilibrium is K, according to the law of mass action. The equilibrium constant expression is known as the ratio, a condition where there is a balance between opposing and static forces.

In this case, it would be:
[tex]Kc = ([Fe]^4[CO2]^3)/([Fe2O3]^2[C]^3)[/tex]

learn more about equilibrium constants here:

https://brainly.com/question/3159758

#SPJ11

The correct expression for the equilibrium constant for the given reaction is:
C) Kc=[Fe2O3]2[C]3[Fe]4[CO2]3

The equilibrium constant (Kc) for a chemical reaction is written using the concentrations of the species involved in the reaction. Here's the general format for writing the equilibrium constant expression:

For the generic reaction:

aA + bB ⇌ cC + dD

The equilibrium constant (Kc) expression would be: Kc = [C]^c [D]^d / [A]^a [B]^b

where [A], [B], [C], and [D] represent the concentrations of the respective species at equilibrium, and a, b, c, and d are the stoichiometric coefficients of the species in the balanced chemical equation.

To know more about Equilibrium Constant:

https://brainly.com/question/29117627

#SPJ11

As a result, it is important to store NaOH in a dry and cool place, away from any sources of moisture or water.

NaOH, also known as sodium hydroxide, is a highly hygroscopic solid. This means that it can easily absorb moisture from its surroundings, including the air. When NaOH absorbs water, it can become more corrosive and potentially dangerous.

This is why it is also important to handle NaOH with care and wear appropriate protective gear, such as gloves and goggles. Additionally, any spills or leaks should be cleaned up immediately and properly disposed of according to local regulations.

By following these precautions, NaOH can be safely used in a variety of applications, including in the production of soap, paper, and textiles.

To learn more about : water

https://brainly.com/question/19491767

#SPJ11

4. The number of each Race Car Part present in Container A are:

5. To draw the maximum number of cars that can be made from the parts in Container A:

Each car requires 1 Body (B), 4 Tires (Tr), 1 Engine (E), and 2 Cylinders (Cy).

We have 3 Bodies (B), 10 Cylinders (Cy), 2 Engines (E), and 9 Tires (Tr).

The limiting parts are the Engines (E) and the Cylinders (Cy), since we don't have enough of either part to build more than 2 cars.

Therefore, we can build a maximum of 2 complete cars from the parts in Container A, and we will have excess parts remaining:

1 Body (B)

6 Tires (Tr)

0 Engines (E)

6 Cylinders (Cy)

6. The student is incorrect because although there are 3 car bodies in Container A, we also need 4 tires, 1 engine, and 2 cylinders for each car. We don't have enough engines or cylinders to build 3 complete cars, so the number of bodies is not the limiting factor.

7. a. To determine the number of complete cars that can be built:

Each car requires 1 Body (B), 4 Tires (Tr), 1 Engine (E), and 2 Cylinders (Cy).

We have a large number of Bodies (B) and Tires (Tr), so we don't need to worry about those parts.

We only have 5 Engines (E) and 12 Cylinders (Cy).

The limiting part is the Cylinders (Cy), since each car requires 2 cylinders and we only have 12.

Therefore, we can build a maximum of 6 complete cars with the available parts:

6 Bodies (B)

24 Tires (Tr)

5 Engines (E)

12 Cylinders (Cy)

b. The limiting part is the Cylinders (Cy), since we only have enough cylinders to build 6 cars, but we have enough engines to build 5 times as many cars.

Find out more on limiting reagents here: https://brainly.com/question/19033878

#SPJ1

The correct answer is option D. All of the above. It is necessary to slowly add the sulfuric acid to the p-cresol/acetic acid mixture in the test tube to prevent any accidents or injuries.

If sulfuric acid is added too soon, the solution may boil and the acid will spew out of the test tube, perhaps resulting in burns.

Sulfuric acid is also an endothermic reaction, which means it takes energy from its surroundings and has the potential to crystallise or cause the solution to harden.

Last but not least, adding the sulfuric acid gradually enables more precise measurement of the supplied sulfuric acid volume.

It is crucial to gradually add the sulfuric acid to the test tube mixture of p-cresol and acetic acid as a result of all these considerations.

Complete Question:

Why would it be necessary to slowly add the sulfuric acid to the p-cresol/acetic acid mixture in the test tube?

Options:

A.  To ensure accurate measurement of the volume of sulfuric acid added.

B. To prevent the solution from boiling and splattering the acidic solution out of the test tube.

C. To prevent the endothermic reaction from solidifying the solution.

D. All of the above.

To learn more about sulfuric acid visit:

https://brainly.com/question/10220770

#SPJ4

Energetic molecules such as NADH and ATP are often reactants of exergonic reactions.

Exergonic reactions are those that discharge energy and have a harmful Gibbs-free energy change. In these reactions, the reactants have more free energy than the products, so the excess energy is cast in the state of heat. An exergonic reaction is a chemical reaction where the shift in the free energy is negative.

Energetic molecules like NADH and ATP store energy in their chemical adhesives, which can be emitted in exergonic reactions to drive endergonic responses that need energy input. Therefore, they are usually employed as reactants in exergonic reactions.

To learn more about Exergonic reactions

https://brainly.com/question/30800156

#SPJ4

The amount of excess reagent that will remain would be 11.76 g.

To determine the excess reagent in the reaction, we need to first determine which reactant is limiting and which reactant is in excess.

The balanced chemical equation for the reaction is:

6Na + Fe2O3 -> 3Na2O + 2Fe

The molar mass of Na is 23 g/mol, and the molar mass of Fe2O3 is 159.69 g/mol (2 x 55.85 g/mol for Fe + 3 x 16 g/mol for O).

Using the given masses, we can calculate the number of moles of each reactant:

According to the balanced chemical equation, 6 moles of Na react with 1 mole of Fe2O3. Therefore, the number of moles of Na required to react with 1.57 mol of Fe2O3 is:

(1.57 mol Fe2O3) x (6 mol Na/1 mol Fe2O3) = 9.42 mol Na

Since we only have 8.70 mol of Na available, it is the limiting reagent. This means that Fe2O3 is in excess.

To determine the amount of excess Fe2O3, we need to calculate how much Fe2O3 is required to react with 8.70 mol of Na:

(8.70 mol Na) x (1 mol Fe2O3/6 mol Na) x (159.69 g/mol Fe2O3) = 238.24 g Fe2O3

Since we only have 250 g of Fe2O3, the amount of excess Fe2O3 is:

250 g - 238.24 g = 11.76 g

Therefore, the amount of excess Fe2O3 left after the reaction is 11.76 g.

More on stoichiometry can be found here: https://brainly.com/question/29775083

#SPJ1

The number of moles of bromine trifluoride needed to produce 23.2 L of fluorine gas according to the reaction would be 0.339 moles.

The balanced equation for the reaction is:

BrF3 → Br + 3F2

From the equation, we can see that 1 mole of BrF3 produces 3 moles of F2. Therefore, to calculate the number of moles of BrF3 needed to produce 23.2 L of F2 at 0°C and 1 atm, we need to use the ideal gas law:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature.

We can rearrange the ideal gas law to solve for n:

n = PV/RT

At 0°C (273 K) and 1 atm, the value of R is 0.08206 L·atm/mol·K. Substituting the values given, we get:

n = (1 atm) × (23.2 L) / (0.08206 L·atm/mol·K × 273 K)

n = 1.017 mol F2

Since 1 mole of BrF3 produces 3 moles of F2, we need 1/3 as many moles of BrF3:

n(BrF3) = 1.017 mol F2 × (1 mol BrF3 / 3 mol F2)

n(BrF3) = 0.339 mol BrF3

Therefore, 0.339 moles of BrF3 are needed to produce 23.2 L of F2 at 0°C and 1 atm.

More on stoichiometric problems can be found here: https://brainly.com/question/14465605

#SPJ1

The pressure of gas is 1.05 atm when a 1.25 g sample of CO₂ is contained in a 750ml flask at 22.5°C.

Molecular weight of CO₂ is 1.25g ,Volume of CO₂ is 750ml,Temperature of CO₂ is 22.5°C and the gas constant is 0.08206 L atm/mol K.

Using the ideal gas law equation the pressure is found to be 1.05 atm.

To calculate the pressure of the gas, we can use the ideal gas law equation: [tex]PV=nRT[/tex]
Where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin.
First, we need to convert the volume to liters by dividing by 1000: 750 ml = 0.75 L.
Next, we need to calculate the number of moles of CO₂ present in the flask. We can use the molecular weight of CO₂ to convert from grams to moles:

[tex]1.25 * (1 /44.01 ) = 0.0284 mol[/tex]
Now we can plug in the values into the ideal gas law equation:

[tex]PV=nRT[/tex]
[tex]P * 0.75 L = 0.0284 mol  * 0.08206 L*atm/mol*K * (22.5 + 273.15) K[/tex]
Simplifying and solving for P, we get:
[tex]P = (0.0284 * 0.08206 * 295.65) / 0.75 = 1.05 atm[/tex]
Therefore, the pressure of the gas in the flask is 1.05 atm.

Learn more about ideal gas law equation here:

https://brainly.com/question/15379358

#SPJ11

The axial stereoisomer is the most reactive in this type of reaction.

In an SN2 reaction with intramolecular catalysis, the most reactive stereoisomer is the one with an axial thioether group.

This is because in the axial position, the thioether group is closer to the leaving group (chlorine), allowing for more efficient overlap of their orbitals and a lower energy transition state.

The equatorial thioether group is farther away from the leaving group, resulting in a higher energy transition state and a slower reaction. Therefore, the axial stereoisomer is the most reactive in this type of reaction.

Learn more about stereoisomer

https://brainly.com/question/31147524

#SPJ4

Answer:

Explanation:

The pH of the solution is 10.80

The pH of the solution is 10.80.

Explanation: This can be calculated using the Henderson-Hasselbalch equation, which takes into account the acid dissociation constant (pKa) of the acid and the concentration of the acid and its conjugate base. The HCl dissociates completely in water, so it does not affect the pH calculation.

The methylamine acts as a weak base and reacts with water to form its conjugate acid, which determines the pH of the solution.

The pKb of methylamine is used to calculate its pKa, which is then used in the Henderson-Hasselbalch equation.

Refer to this link to know more about how to calculate the pH of a solution
https://brainly.com/question/30881040?referrer=searchResults

Without more information about the synthesis process and the specific substances used, it's difficult to say exactly what the solid or oil that was not soluble in hexanes might be. However, there are a few possibilities to consider.

One possibility is that the solid or oil is an impurity that was introduced during the synthesis process. For example, it could be a side product or a reactant that did not fully react with the adipoyl chloride. In this case, the substance may not be soluble in hexanes because it has different chemical properties than the desired product.

Another possibility is that the substance is a byproduct of the reaction between the adipoyl chloride and another substance, such as a solvent or a catalyst. In this case, the substance may not be soluble in hexanes because it has a different chemical structure than the desired product and is not compatible with hexanes.

Alternatively, it's possible that the solid or oil is a form of the adipoyl chloride itself. For example, if the adipoyl chloride was not fully purified or if it was synthesized using impure starting materials, it could contain other compounds that are not soluble in hexanes.

Overall, without more information about the synthesis process and the specific substances used, it's difficult to determine the exact nature of the solid or oil that was not soluble in hexanes. Further analysis, such as chromatography or spectroscopy, may be necessary to identify the substance and determine its origin.

This weather map shows that there is a low pressure system in the north and a high pressure system in the south.

Weather is the study of atmospheric conditions that exist in a specific area over a short period of time. It is the sum of all atmospheric conditions including temperature, humidity, wind, air pressure, cloud cover and precipitation. Weather is an important factor in determining the temperature, humidity and other characteristics of the environment. It affects human activities such as agriculture, transportation and recreation. Weather is dynamic and constantly changing. It is affected by a variety of factors such as solar radiation, air pressure, ocean currents, land topography and human activities. Weather is also affected by climate, which is the average weather pattern over a long period of time. Understanding weather is important for many reasons, including to predict storms and floods, to plan for extreme weather events, and to prepare for natural disasters.

This weather map shows that there is a low pressure system in the north and a high pressure system in the south. The low pressure system is bringing cooler temperatures and precipitation, while the high pressure system is bringing warmer temperatures and clear skies. There is a cold front moving eastward from the north, and a warm front moving eastward from the south.

To learn more about weather

https://brainly.com/question/29709289

#SPJ9

Okay, let's solve this step-by-step without using quadratics:

1) The equilibrium constant Kc = 0.36 means the equilibrium lies to the left. So there will be more N2O4 than NO2 at equilibrium.

2) The initial concentration of N2O4 is 0.1 mol dm^-3. Let's call this [N2O4]initial.

3) At equilibrium, the concentrations of N2O4 and NO2 will be [N2O4]equil and [NO2]equil respectively.

4) We know the equilibrium constant expression for this reaction is:

Kc = ([NO2]equil)^2 / [N2O4]equil

5) Setting this equal to 0.36 and plugging in 0.1 for [N2O4]initial, we get:

0.36 = ([NO2]equil)^2 / (0.1 - [NO2]equil)

6) Simplifying, we get:

0.036 = [NO2]equil^2

7) Taking the square root of both sides, we get:

[NO2]equil = 0.06 mol dm^-3

So the equilibrium concentration of NO2 is 0.06 mol dm^-3.

Let me know if you have any other questions! I can also provide a more step-by-step explanation if needed.

The molar mass of the unknown non-electrolyte liquid is given as

256 g/mol, option A.

The ratio between the mass and the amount of substance (measured in moles) of any sample of a chemical compound is known as the molar mass (M) in chemistry. The molar mass of a material is a bulk attribute rather than a molecular one.

ΔTemp.f = i x Kf x b

where,

ΔTemp.f = the freezing-point depression;

i = the Van't Hoff factor

Kf = the cryoscopic constant of the solvent;

b = the molality of the solution.

                   = 1.32/(1*1.86)

                   = 0.71 mol/kg

            0.71 mol/kg * 1kg/1000g

             = 0.00071 mol/g.

              Number of moles = mass * molality

              = 0.00071 * 110

              = 0.078 mol.

          Molar mass (g/mol) = mass/number of moles

          Mass of solute (liquid) = 20g

          Molar mass = 20/0.078

          = 256.2 g/mol. ≈ 256 g/mol

Therefore, molar mass of the unknown liquid is 256.2 g/mol.

Learn more about Molar mass:

https://brainly.com/question/837939

#SPJ4

Complete question:

A solution containing 20.0 g of an unknown non-electrolyte liquid and 110.0 g water has a freezing point of -1.32 °c. given kf = 1.86°c/m for water, the molar mass of the unknown liquid is ____g/mol.

A)256B) 69.0 C) 619 D) 78.1

The molar mass of the unknown liquid is 256.5 g/mol.To solve this problem, we can use the formula for calculating the freezing point depression: ΔTf = Kf·m·i

where ΔTf is the change in freezing point (in °C), Kf is the freezing point depression constant (in °C/m), m is the molality of the solution (in mol/kg), and i is the van't Hoff factor (which is 1 for non-electrolytes).

First, we need to calculate the molality of the solution:

molality = moles of solute / mass of solvent (in kg)

We know that the mass of the solvent (water) is 110.0 g, which is 0.1100 kg. To find the moles of solute (the unknown liquid), we need to divide its mass (20.0 g) by its molar mass (which we don't know yet). Let's call the molar mass "M":

moles of solute = 20.0 g / M

So, the molality is:

molality = (20.0 g / M) / 0.1100 kg
molality = (20.0 / M) / 0.1100 mol/kg

Now, we can plug this into the formula for freezing point depression:

ΔTf = Kf·m·i
-1.32 = 1.86·[(20.0 / M) / 0.1100]·1

Simplifying this equation, we get:

-1.32 = 1.86·(181.8 / M)
-1.32 = 338.628 / M
M = 338.628 / 1.32
M = 256.5 g/mol

Therefore, the molar mass of the unknown liquid is 256.5 g/mol.

Learn more about freezing point here: brainly.com/question/3121416

#SPJ11

The moles of NaF that must be dissolved in 1.00 liter of a saturated solution of PbF₂ at 25˚C to reduce the [Pb²⁺] to 1 x 10⁻⁶ molar is 2.0 x 10⁻⁵.

The solubility product expression for PbF₂ is given by:

At equilibrium, the product of the ion concentrations must be equal to the solubility product constant. We are given that the [Pb²⁺] in the saturated solution is 1 x 10⁻⁶ M. Therefore, we can use the Ksp expression to calculate the concentration of F- in the solution:

Now, we can calculate the amount of NaF needed to reduce the [F⁻] concentration to 2.0 x 10⁻¹ M. Since NaF is a 1:1 electrolyte, the concentration of F- will be equal to the concentration of NaF added.

However, we need to dissolve this amount of NaF in a saturated solution of PbF₂. Therefore, we need to check that the amount of NaF we added will not exceed the maximum amount that can dissolve in the solution at 25˚C.

To learn more about solubility, here

https://brainly.com/question/29661360

#SPJ4

There are 7.52 x 10^22 molecules of carbon dioxide gas, CO2, in 0.125 moles.

        The number of molecules in a given number of moles can be calculated using Avogadro’s number, which is approximately 6.022 x 10^23. This number represents the number of particles (atoms or molecules) in one mole of a substance.

         To calculate the number of molecules in 0.125 moles of CO2, we can multiply the number of moles by Avogadro’s number: 0.125 moles x (6.022 x 10^23 molecules/mole) = 7.52 x 10^22 molecules.

         Avogadro’s number is a fundamental constant in chemistry and is used in many calculations involving moles and molar mass.  

To learn more about carbon dioxide,

brainly.com/question/3049557

False. In a closed system, matter can not enter or exit that is there is no change in the matter of the system.

Three types of systems exist in nature:

1. Open System: In this system, the matter can interact with the surroundings or matter can enter or exit the system from the surrounding. Similarly, the energy of the system also interacts with its surroundings and can be lost or gained.

For example oceans etc.

2. Closed system: In this system, the matter is unable to interact with the surroundings that are matter can't exit or enter the system. While the energy of the system is able to interact with the surroundings.

For example Earth etc

3. Isolated system: In this system, both matter and energy are unable to interact with the surrounding. There is no exchange between matter and the energy of surroundings.

For example thermos-teel bottles etc.

Learn more about Open Systems:

https://brainly.com/question/28891854

#SPJ4