Therefore, 540 nm is the wavelength od light that reflects light the least.
In wavelength, what does mean?The Greek symbol lambda () is commonly used to represent a wave's length. Wavelength is defined as the product of the speed (v) and frequency (f) of a travelling wave in a given medium.
The definitions of wavelength and frequencyThe wavelength, which is also the distance between the two wave crests and troughs, is the measurement of wave length. In per second cycles (Hz), the term "frequency" represents the number many vibration that cross a specific area in a second (Hertz). This article talks about the relationship between wavelength and frequency.
To know more about wavelength visit:
https://brainly.com/question/13533093
#SPJ4
An automobile traveling initially at a speed of 60 m/s is accelerated uniformly to a speed of 85 m/s in 12 s. How far does the automobile travel during the 12 s interval?
Answer:
870 m
Explanation:
d = Vit + 1/2at²
a = ΔV/Δt = (85 m/s - 60 m/s) / (12 s) = (25 m/s) / 12 s = 2.08 m/s²
d = (60 m/s)(12 s) + 1/2 (2.08 m/s²)(12 s)² = 870 m
Answer:
The automobile traveled 870 meters during the 12 second interval.
Explanation:
We can use this kinematics equation to evaluate how far the automobile traveled.
[tex]\overline v=\frac{\Delta x}{\Delta t}[/tex]
Note
[tex]\overline v[/tex] is the average velocity
[tex]\Delta x[/tex] is the change in position (displacement)
[tex]\Delta t[/tex] is the change in time (time interval)
The formula for average velocity is
[tex]\overline v=\frac{V_f-V_o}{2}[/tex]
We are given
[tex]V_f=85\\V_o=60\\\Delta t=12[/tex]
First lets evaluate the average velocity.
[tex]\overline v=\frac{85-60}{2}[/tex]
[tex]\overline v=72.5[/tex]
Rearranging our kinematics equation to isolate [tex]\Delta x[/tex] we get
[tex]\Delta x=\overline v \Delta t[/tex]
Now lets evaluate [tex]\Delta x[/tex].
[tex]\Delta x=72.5*12\\\Delta x=870[/tex]
There are many different ways you can solve this; I could have used a different equation.
you are traveling by plane and reach cruising altitude, where the pilot says you are going 450.0 km/hr. you turn your laptop back on, and it takes 27.00 seconds to start up. how far have you traveled in this time?
You have travelled 3.375 km in the time it took for the laptop to start up.
What is distance travelled?Distance travelled is the total amount of distance that a person, vehicle, or object has traveled from one place to another. It is usually measured in miles, kilometers, or other units of measurement. Distance traveled is an important factor when calculating time, speed, or cost.
To calculate how far you have traveled in 27 seconds, we must first calculate the distance traveled in one second. To do that, we need to divide the speed (450.0 km/hr) by 3600, which is the number of seconds in an hour.
450.0 km/hr / 3600 = 0.125 km/s
Now that we know the distance traveled in one second, we can multiply it by the number of seconds it took for the laptop to start up (27.00 seconds).
0.125 km/s x 27.00 seconds = 3.375 km
Therefore, you have traveled 3.375 km in the time it took for the laptop to start up.
To learn more about distance travelled
https://brainly.com/question/29409777
#SPJ4
You and your friend throw balloons filled with
water from the roof of a several story apartment house. You simply drop a balloon from
rest. A second balloon is thrown downward
by your friend 3.4 s later with an initial speed
of 66.64 m/s. They hit the ground simultaneously.
How high is the apartment house? The
acceleration of gravity is 9.8 m/s
2
. Neglect
air resistance.
Answer in units of m. Answer in units of
m.
The height of the apartment is 127.5 m.
What is the height of the apartment?
The height of the apartment is calculated by applying the following equation.
first equation for your throw; h = ¹/₂g(t +3.4)²
second equation for your friend's throw; h = vt + ¹/₂gt²
h = vt + ¹/₂gt²
h = 66.64t + ¹/₂gt²
now equate the two equations;
¹/₂g(t+3.4)² = 66.64t + ¹/₂gt²
¹/₂(9.8)(t² + 6.8t + 11.56) = 66.64t + ¹/₂(9.8)t²
4.9(t² + 6.8t + 11.56) = 66.64t + 4.9t²
4.9t² + 33.32t + 56.64 = 66.64t + 4.9t²
33.32t = 56.64
t = 1.7 seconds
The height of the apartment is calculated as;
h = ¹/₂g(t +3.4)²
h = ¹/₂(9.8)(1.7 +3.4)²
h = 127.5 m
Learn more about height of fall here: https://brainly.com/question/15611384
#SPJ1
what is fetch? multiple choice question. the distance from wave trough to wave crest the distance over water that the wind blows in the same direction a standard measure used for water depth
Fetch: A region of an ocean or lake's surface where wind blows in a direction that is basically continuous, producing waves.
How physically act waves?An energetic disturbance called a wave moves from one place to another. The only thing that changes when a wave moves is energy, not matter. The substance in which a wave passes is known as the medium. Until it lands in the same place, that medium frequently swings back and forth.
What are the three fundamental qualities of waves?But amplitude, wavelength, energy, and speed are characteristics that all waves share. How much a wave's medium moves is described by its amplitude. Wavelength and frequency both refer to the size and frequency of waves. A wave's speed is its rate of movement.
To know more about waves visit:
https://brainly.com/question/25954805
#SPJ4
Three point charges are arranged along the x axis. Charge q1 = -4. 10 nC is located at x= 0. 250 mand charge q2 = 2. 20 nC is at x= -0. 320 m. A positive point charge q3 is located at the origin.
What must the value of q3 be for the net force on this point charge to have magnitude 3. 10 μN ? (ans in nC)
What is the direction of the net force on q3? + or - direction
Where along the x axis can q3 be placed and the net force on it be zero, other than the trivial answers of x=+[infinity] and x=−[infinity]? (ans in m)
q₃ is approximately -7.58 nC. The direction of the net force on 'q₃' is the negative '-' direction. For the net force on 'q₃' to be zero, 'q₃' can be placed at x = -0.079 m or x = -1.881 m
What is the direction of the net force on q3?q₃ is approximately -7.58 nC
The direction of the net force on 'q₃' is the negative '-' direction
For the net force on 'q₃' to be zero, 'q₃' can be placed at x = -0.079 m or x = -1.881 m
1) The force, 'F', between two charged spheres is given as follows;
F = K*q1*q2/r2
By substituting the given values, we have;
F NET = 14117n C *K /320
K = 9 × 10⁹ N·m²·C⁻²
q₃ ≈ -7.58 nC
= -7.58 nC
2) Given that the negative charge, 'q₁' (-4.10 nC), is located at x = 0.250 m, which is on the positive, '+' side of the origin, it will repel the negatively charged 'q₃', to the '-' direction. q₃ will also be attracted to the '-' direction by the positively charged 'q₂' which is at -0.320 m on the negative side of the origin
The net force's direction on q₃ will be in the '-' direction
3) For zero net force, we have;
= K* 2.20 n C /R 1 (2)
The distance between the given point charges, r = 0.250 - (-0.320)) = 0.57 m
Let 'r1' represent the distance between 'q1' and 'q3', therefore, the distance between 'q2' and 'q3' is 0.57 - r1
From which we have;
(r₁)²×4.10 = 2.20 × (0.57 - r₁)²
From the above equation, we have;
95,000·r₁²+ 125,400·r₁-35739 = 0
Solving, using a graphing calculator we get;
r₁ ≈ 0.241 or r₁ ≈ -1.561
Where, 'r₁', is measured from 'q₂', therefore, we have;
r₁ = 0.241 + (-0.320) ≈ -0.079 or r₁ = -1.561 + (-0.320) ≈ -1.881
Therefore, the charge 'q₃' can be placed at x = -0.079 or x = -1.881 for the ne force on it to be zero
To learn more about net force refer
https://brainly.com/question/21317735
#SPJ4
(d) A 2.5 kg object is placed avocation X where it has 10 J of potential energy. A person bumps the shelf causing the object to fall to the ground, Describe the Law of Conservation of Energy and how it is demonstrated as the object falls to the ground.
The Law of Conservation of Energy states that energy cannot be created or destroyed, only transferred or converted from one form to another. This means that the total amount of energy in a closed system remains constant.
As the object falls to the ground, its potential energy is converted into kinetic energy. The potential energy is determined by the object's mass and its height above the ground. As the object falls, its height decreases and its potential energy decreases, but this decrease in potential energy is compensated by an increase in kinetic energy. The kinetic energy is determined by the object's mass and its velocity. As the object's height decreases and its velocity increases, its kinetic energy increases.
As the object falls, the total amount of energy remains constant. The initial potential energy of 10 J is equal to the final kinetic energy of the object. This is an example of the Law of Conservation of Energy in action. The object's potential energy is transformed into kinetic energy, but the total amount of energy remains the same.
a test ton used on a radio has a frequency of 1000 hz. what is the wavelength of this sound in air at normal room temperature
Explanation:
"Outlier" data can shift a Normal Bell Curve ____.
A. to get a large peak
B. to flatten out
C. to the left or right
D. up at both ends
What is the magnitude of the force F on the 1.0 nC charge in the figure ?
The magnitude of the force F on the 1.0 nC charge in the figure is the positive charge and force F is 8 x 10^9 N (8 Giga Newtons).
The force F on the 1.0 nC charge in the figure can be calculated using Coulomb's law, which states that the force between two point charges is proportional to the inversely proportional to the square of the distance between the charges and a product of the charges. The magnitude of the force can be calculated using the following formula:
|F| = k x |q1| x |q2| / r^2
where k is the Coulomb constant (9 x 10^9 Nm^2/C^2), q1 and q2 are the charges (in Coulombs), and r is the distance between the charges (in meters).
In this case, q1 = 1.0 nC = 1.0 x 10^-9 C and q2 = -1.0 nC = -1.0 x 10^-9 C (since the charges are opposite and the force is attractive) and r = 0.1 m.
So, the magnitude of the force F can be calculated as:
|F| = k x |q1| x |q2| / r^2 = (9 x 10^9 Nm^2/C^2) x (1.0 x 10^-9 C) x (-1.0 x 10^-9 C) / (0.1 m)^2 = 8 x 10^9 N
The magnitude of the force F is 8 x 10^9 N (8 Giga Newtons)
It's important to note that the direction of the force is from the positive charge.
To know more about force please refer: https://brainly.com/question/13191643
#SPJ4
suppose a certain heat engine has an efficiency of 35% . a thermodynamic diagram showing a hot reservoir above, a cold reservoir below, and a closed system in between. a thick arrow indicates that heat flows into the system from the hot reservoir. thinner arrows indicate that the system does work and expels heat into the cold reservoir. in order for this heat engine to do 420 j of useful work, how much energy must be taken in as heat from the high-temperature reservoir?
Energy must be taken in as heat from the high-temperature reservoir is 1200 J.
What do you mean by thermodynamics?The science of thermodynamics examines how heat, work, temperature, and energy are related. The flow of energy from one location to another and from one form to another is broadly what thermodynamics is concerned with.
The efficiency of a heat engine is the ratio of the useful work done by the engine to the total heat energy taken in from the hot reservoir. In this case, the efficiency is 35%. Therefore, the useful work done by the engine is 35% of the total heat energy taken in from the hot reservoir.
If the heat engine does 420 J of useful work, we can use the efficiency formula to find the total heat energy taken in from the hot reservoir:
Total heat energy = (Useful work) / (Efficiency) = 420 J / 0.35 = 1200 J
So, in order for this heat engine to do 420 J of useful work, it must take in 1200 J of energy as heat from the high-temperature reservoir.
To know more about energy visit:
https://brainly.com/question/1932868
#SPJ4
A ball is thrown straight up into the air, with an initial speed of 28.2 m/s.
How fast is it moving after 1.00 s?
the rotating armature of an ac generator is connected to its external circuit through ? while a dc generator uses a(n) ? to make the connection.
With the help of slip rings, an AC generator connects the rotating armature to its external circuit.
A slip ring is an electronic device that permits the transfer of electrical currents and energy from a still structure to a spinning one. Any electrical device that needs to rotate while sending energy or currents can employ a slip ring.
A device that generates electrical energy from mechanical energy is an AC generator. Mechanical energy is provided by steam turbines, gas turbines, and combustion engines as the AC generator's input source. Alternating electrical power in the form of current and voltage is the output.
To learn more about AC generator here
brainly.com/question/13861856
#SPJ4
calculate the wave- length of the x-rays that could be produced when these elec- trons strike a solid.
The wavelength of x-rays that could be produced when the electrons strike a solid is given by Bragg's equation. Mathematically, it is represented as, n λ = 2 d sinθ.
The X-angle ray's of incidence, and angle of scattering, are the same when it strikes a crystal surface. Additionally, constructive interference will happen when the path difference, d, is equal to a whole number of wavelengths, n.
As we require wavelength, let us make it as the subject in the above equation. Then we have, λ = 2 d sinθ/n
where,
d is the distance between atoms' planes
θ is the angle of scattering
n is the path difference
To know more about x-rays:
https://brainly.com/question/29855408
#SPJ4
what must the charge (sign and magnitude) of a particle of mass 1.50 g be for it to remain stationary when placed in a downward-directed electric field of magnitude 670 n/c ?
The force acting on a negative charge is in opposition to the direction of the electric field [tex]-2.194 \times 10^{-5}[/tex].
In order for a charge to stay stationary, a weight must be balanced by an electric force that acts in the opposite direction as the weight, with the electric force acting upward.
In a directed electric field, the electric charge particles are subject to a force that is directed in that direction. It can be caused by a charge imbalance, which is when there are more positively charged particles than negatively charged particles in a certain region.
A particle of mass 1.50 g
A downward-directed electric field of magnitude 670 n/c
qE=mg
q=mg/E
Substitute the value in above equation we get,
[tex]& =\frac{1.50 \times 10^{-3} \times 9.8}{670} \\& =-2.194 \times 10^{-5} \mathrm{C}[/tex]
For such more question on electric field
https://brainly.com/question/14372859
#SPJ4
The denity of water i 997 kg/m3. A wimming pool contain 375 m3 of water. What i the ma of thi water?
Explanation:
ρ = 997kg/m³
v = 375m³
ρ = m/v
m = ρv
m = 997×375
m = 373,875kg
a ball is thrown upward. what is its time interval between the release of the ball and the time it reaches its maximum height?
The upward throw of a ball. The gravity acceleration is 9.8 m/s2, and its combination 1 speed is 10.8 m/s. So, 1.10 seconds pass between the ball's release and the moment it reaches its highest point.
What happens to the ball's speed when it is launched upward and returns to the spot from which it was hurled?Gravity's acceleration is constantly downward and constant, however the speed and direction of the acceleration vary. The speed of the ball is zero at its top portion in its trajectory, then it picks up speed again as it descends toward.
Why does an object being hurled upward have a zero final velocity?Because the acceleration caused by the gravitational force is operating constantly downward at the greatest point when a body was thrown vertically upwards, only that point's velocity is zero. As a result, the velocity is zero due to the acceleration.
To know more about acceleration visit:
https://brainly.com/question/2303856
#SPJ4
radiant energy is also called(1 point) responses thermal energy. thermal energy. light energy. light energy. chemical energy. chemical energy. cellular energy.
Radiant energy is also called responses thermal energy (b) light energy is correct option.
Radiant energy in physics refers to the energy of electromagnetic and gravitational radiation. Radiant energy is particularly studied via radiometry. Its SI unit for energy is the joule (J). Other than radiometry, electromagnetic energy is denoted by the letters E or W. The phrase is specifically used when electromagnetic radiation is released into the environment by a source. For the human eye, this radiation might be visible or invisible.
Energy included in electromagnetic waves is known as radiant energy. These consist of microwaves, infrared, radio waves, ultraviolet light, and visible light. The random molecular movements of substances store thermal energy, often known as heat energy.
To know more about radiant energy
https://brainly.com/question/29102331
#SPJ4
which region includes the lowest pressures and highest temperatures at which the phase of x is known?
The region with the lowest pressures and highest temperatures at which the phase of x is known is the supercritical region.
This region is between the critical temperature and pressure, and is characterized by a single phase that is neither liquid nor gas, but rather a combination of the two.
This region exhibits properties that are intermediate between those of a liquid and a gas, and so the phase of X is known here.
A fluid is referred to as "supercritical" when it is subjected to pressure and temperature above the compound's critical point. The fluid exhibits specific characteristics and behaves in a manner that is in between that of a liquid and a gas in the supercritical region.
To know more about region here
https://brainly.com/question/13162113
#SPJ4
the acceleration of gravity on the surface of mars at the equator is 3.699 m/s2. how long does it take for a rock dropped from a height of 1.099 m to hit the surface?
It takes total time of 74 seconds for a rock dropped from a height of 1.099 m to hit the surface.
That planet's gravitational acceleration is 3.699 meters per second squared. The height from which the object was dropped takes 0.8198 seconds to reach the surface. Because the initial velocity is zero,
H = Ut + 1/2 a[tex]t^{2}[/tex] Because u = 0, this is half multiplied by 3.699 multiplied by [tex]0.8198^{2}[/tex] divided the.81988198 right divide by 2. This gives us an estimate of 1.25 meters.
When the rock is launched upwards, it begins to decelerate immediately due to the opposing force of gravity. The rock will have reached its highest point and will then fall back down when the velocity on the ascent reaches zero.
Learn more about time:
brainly.com/question/15356513
#SPJ4
A badger is trying to cross the street. Its velocity vvv as a function of time ttt is given in the graph below where rightwards is the positive velocity direction. A set of black coordinate axes are given with the vertical axis labeled "v (m/s)" and the horizontal axes labeled "t (s)". A curve that relates v to t is shown in blue. It begins with a straight line of endpoints (0,0) and (1,5). This first line is connected to a second line with endpoints (1,5) and (3,-5). This second line is then connected to a third line of endpoints (3,-5) and (6,-5). A set of black coordinate axes are given with the vertical axis labeled "v (m/s)" and the horizontal axes labeled "t (s)". A curve that relates v to t is shown in blue. It begins with a straight line of endpoints (0,0) and (1,5). This first line is connected to a second line with endpoints (1,5) and (3,-5). This second line is then connected to a third line of endpoints (3,-5) and (6,-5). What is the badger's displacement \Delta xΔxdelta, x from t=2\,\text st=2st, equals, 2, start text, s, end text to 3\,\text s3s3, start text, s, end text?
You are given a set of black coordinate axes with '(velocity) v (m/s)' on the vertical axis and 't (s)' on the horizontal axis.
What is velocity?Velocity defines the direction in which a body or object is moving. Velocity is primarily a scalar quantity. Velocity is basically a vector quantity. Rate of change of distance and Rate of change of displacement is called velocity. Speed corresponds to the speed and direction of travel indication (eg 60 km/h north). Velocity is generally defined as a vector value of the speed and the direction of motion. Simply put, velocity is the speed at which something moves in one direction. Both the speed of a car traveling north on a highway and the speed of a rocket launching into space can be measured by velocity.to learn more about velocity from the given link:
https://brainly.com/question/18084516
#SPJ1
You will get a set of black coordinate axes with "(velocity) v (m/s)" on the vertical axis and "t (s)" on the horizontal axis.
What is speed?
Speed is the direction in which a body or object is moving. Speed is primarily a scalar quantity. Speed is essentially a vector quantity. The rate of change of distance and the rate of change of displacement are called velocity. Speed corresponds to the specification of speed and direction of movement (e.g. 60 km/h to the north). Velocity is commonly defined as a vector value of velocity and direction of motion. Simply put, speed is how fast something is moving in one direction.
The speed of a car driving north on a freeway and the speed of a rocket launched into space can be measured by velocity.
to learn more about velocity from the given link:
brainly.com/question/18084516
#SPJ1
a ball is moving at 7.0 m/s and has a momentum of 100kg m/s what is the balls mass
Answer: 14,286 kg
Explanation:
Mass and velocity, have a positive correlation to momentum.
The formula to determine momentum is:
Momentum = Mass x Velocity
So, if we want to determine the mass of the object, the formula can be rearranged to look like this:
Momentum/Velocity = Mass
And can be solved by imputing the values given in the question:
Mass = (100 kg*m/s) ÷ (7 m/s)
Mass = 14,286 kg
Explain which movement Jamal should make (which car and which point), and why that movement will result in the largest increase in potential energy. Describe the magnetic force that will act on the vehicle he moves.
Because potential energy increases with separation distance, Jamal should move the toy car with the greatest separation distance.
What do you mean by potential energy ?The term potential energy is defined as stored energy that depends upon the relative position of various parts of a system. Potential energy is energy that cannot be transfer to kinetic energy. It has the capacity to do work but is not presently doing so.
Because magnetic force is inversely proportional to the separating distance between the cars, the magnetic force acting on the vehicles will decrease as he moves the cars away from each other.
Thus, potential energy increases with separation distance, Jamal should move the toy car with the greatest separation distance.
To learn more about the potential energy, follow the link;
https://brainly.com/question/24284560
#SPJ1
PART 1
The figure shows a claw hammer as it pulls a
nail out of a horizontal board. If a force of magnitude 124 N is exerted
horizontally as shown, find the force exerted
by the hammer claws on the nail. (Assume
that the force the hammer exerts on the nail
is parallel to the nail).
Answer in units of N.
PART 2
Find the force exerted by the surface on the
point of contact with the hammer head. Assume that the force the hammer exerts on the
nail is parallel to the nail.
Answer in units of N.
(1) The force exerted by the hammer claws on the nail is 67.54 N.
(2) The the force exerted by the surface on the point of contact with the hammer head is 124 N.
What is the force exerted by the hammer claws on the nail?
The force exerted by the hammer claws on the nail is calculated by applying the following formula.
Fy = W sinθ
where;
θ is the inclination of the claw on the headW is the force exertedFy = 124 N x sin ( 33 )
Fy = 67.54 N
The the force exerted by the surface on the point of contact with the hammer head is calculated as follows;
Fn = W sin (90)
Fn = 124 N
Learn more about parallel force here: https://brainly.com/question/14960101
#SPJ1
The globe is divided into time zones, so that any given hour of the day in one time zone occurs at a different time in other time zones. For example, New York City is in one time zone and Los Angeles is in another time zone. When it is 8:00 a.m. in New York City, it is only 5:00 a.m. in Los Angeles. Explain how Earth’s motions cause this difference in times.
Answer:
The rotation of the earth on its tilted axis is the reason behind the difference in the length of the day and night time in different parts of the earth throughout the year. The annual motion of the Earth is called revolution. Since the path of the Earth is elliptical, the interval between the Earth and the Sun keeps shifting.
Explanation:
A figure skater begins spinning counter-
clockwise at an angular speed of 3.2 pi rad/s.
During a 4.6 s interval, she slowly pulls her
arms inward and finally spins at 7.7 pi rad/s.
What is her
average angular acceleration
during this time interval?
Answer in units of rad/s?.
The average angular acceleration of the figure skater during the time interval of 4.6 s is 0.99 rad/s².
Define the term Angular Acceleration?We may determine the body's angular acceleration using the second-order derivative from angular displacement. We can indicate the course of the applied net torque by looking at the path of angular acceleration.For this question:
A figure skater starts spinning counterclockwise at 3.2 pi rad/s of angle.She gently draws her arms inside over a 4.6 s gap, eventually spinning at 7.7 pi rad/s.Then,
angular acceleration = Change in angular velocity / time
α = ω2 - ω1 / t
α = 7.7 - 3.2 / 4.6
α = 4.5/4.6
α = 0.99 rad/s²
Thus, the average angular acceleration of the figure skater during the time interval of 4.6 s is 0.99 rad/s².
To know more about the Angular Acceleration, here
https://brainly.com/question/13014974
#SPJ1
A box is attached to the ceiling and the wall with two ropes. The force of tension in the top rope is T1=√3 N and the force of tension in the side rope is T2=1 N. If the box has a mass of m=2kg, what force FA do you have to apply to break the ropes and accelerate the box with a=1 m/s2?
So the force you have to apply to break the ropes and accelerate the box with a=1 m/s^2 is 2 + √3 + 1 N
Calculating the problem:To determine the force FA that must be applied to break the ropes and accelerate the box with a=1 m/s^2, you can use the equation of motion:
F = ma
where F is the net force acting on the box, m is the mass of the box, and a is the acceleration of the box.
We know that the net force acting on the box is equal to the force applied to it minus the forces of tension in the top and side ropes.
So, F = FA - T1 - T2
and the acceleration of the box is 1 m/s^2
Given that,
FA = m×a + T1 + T2
Substitute the given values for m, a, T1 and T2,
FA = 2 kg × 1 m/s² + √3 N + 1 N
FA = 2 kg × 1 m/s² + √3 N + 1 N
= 2 + √3 + 1 N
What is movement?An object's movement or shift in position in relation to its surroundings over time is referred to as the motion. A subfield of physics that deals with the behavior of physical systems and objects is mechanics, the study of motion.
There are various kinds of motion, such as:
Motion in a line:This is straight-line motion. The linear velocity and acceleration of an object are calculated using the distance and time it takes to travel in a particular direction.
Motion by rotation:An axis is in motion here. When describing an object's rotational motion, the terms "angular displacement," "angular velocity," and "angular acceleration" are utilized.
Rhythmic oscillation: This is a motion that happens over and over again and revolves around a central point. It's called oscillation. A pendulum that swings or a guitar string that vibrates are two examples.
Motion of a projectile: This is the movement of an object that is projected into the air, like a ball that is thrown into the air or a gunshot.
Relational movement: This is how an object moves in relation to a reference point, like how a car moves on a road in relation to the earth.
Learn more about Velocity :
brainly.com/question/18084516
#SPJ4
what must the charge (sign and magnitude) of a 1.55 g particle be for it to remain balanced against gravity when placed in a downward-directed electric field of magnitude 635 n/c ?
The 1.55 g particle must have a positive charge that is equivalent to 635 N/C times (1.55 g / 9.8 m/s2) = 11.9 C. To maintain equilibrium against gravity.
for a)
a particle's charge must be opposite in sign and magnitude to the electric force acting on it.
mg = qe
1.55 X 10 ⁻³ X 9.81 = q X 635
q = - 0.023 X 10⁻³ C
it willl be negative
We get at q = F / E = 15.09 N / 635 N/C = 0.0237 C after solving for the charge.
This indicates that the particle's charge must be positive and equal to 0.0237 Coulombs in order for it to balance against gravity in the 635 N/C-magnitude downward electric field.
qe = mg
1.6 X 10 ⁻¹⁹ E = 1.67 X 10 ⁻²⁷ X 9.81
E = 1.02 X 10⁻⁷N/C
learn more about gravity here:
https://brainly.com/question/14874038
#SPJ4
How high above the ground is a 10 kg boulder that has 2400 J of gravitational potential energy? use g = 10 m/s2 (Hint: PE = mgh which rearranges to h = PE/mg)
Answer: Therefore, the rock that has a mass of 10 kg and a gravitational energy of 2400 J must be at a height of 24 meters.
Explanation:
How high above the ground is a 10 kg boulder that has 2400 J of gravitational potential energy?
Data:
m = 10 kg
Epg = 1200 J
h = ?
g = 10 m/s²
The formula for gravitational potential energy is:
Epg = m * g * hWhere
Epg = Gravitational potential energym=massg = gravityh = heightWe must calculate the height, for which we clear the formula, then
[tex]\boxed{\large\displaystyle\text{$\begin{gathered}\sf \bf{h=\frac{Ep_g}{m*g} } \end{gathered}$}}[/tex]
We substitute data in the formula and solve:
[tex]\boxed{\large\displaystyle\text{$\begin{gathered}\sf \bf{h=\frac{2400 \ J}{10 \ kg*10\frac{m}{s^2} } } \end{gathered}$}}[/tex]
[tex]\boxed{\large\displaystyle\text{$\begin{gathered}\sf \bf{h=\frac{2400 \ J}{100 \ kg*\frac{m}{s^2} } } \end{gathered}$}}[/tex]
Before continuing to answer, we must work with the units of Joules, so
[tex]\boxed{\large\displaystyle\text{$\begin{gathered}\sf \bf{h=\frac{2400 \ N*m}{100 \ kg*\frac{m}{s^2} } } \end{gathered}$}}[/tex]
[tex]\boxed{\large\displaystyle\text{$\begin{gathered}\sf \bf{h=\frac{2400 \not{kg}*\not{\frac{m}{s^2}} *m}{100 \not{kg}*\not{\frac{m}{s^2}} } } \end{gathered}$}}[/tex]
[tex]\boxed{\large\displaystyle\text{$\begin{gathered}\sf \bf{h=\frac{2400 \ m}{100} } \end{gathered}$}}[/tex]
[tex]\boxed{\boxed{\large\displaystyle\text{$\begin{gathered}\sf \bf{h\cong24 \ m } \end{gathered}$}}}[/tex]
Therefore, the rock that has a mass of 10 kg and a gravitational energy of 2400 J must be at a height of 24 meters.
To learn at https://brainly.com/question/24474527To learn at https://brainly.com/question/22516755a car makes a trip due north for three-fourths of the time and due south one-fourth of the time. the average northward velocity has a magnitude of 27 m/s, and the average southward velocity has a magnitude of 17 m/s. what is the average velocity (magnitude and direction) for the entire trip?
The magnitude of the average northward velocity is 27 m/s, while the magnitude of the average southbound velocity is 17 m/s. The total journey average speed is 20.25 m/s to the north.
We must determine the weighted average of the northward and southern velocities in order to get the average speed for the whole journey. We may apply the following formula since the automobile drives north for 3/4 of the time and south for 1/4 of the time:
average speed is (3/4) * (27 m/s) + (1/4) * (-17 m/s)
Since the southbound velocity is moving in the opposite direction of the northward velocity, it is given a negative sign.
Calculating the average velocity results in:
Average speed is equal to (3/4) times 27 m/s plus (1/4) times -17 m/s, or 20.25 m/s.
The total journey average speed is 20.25 m/s to the north.
learn more about velocity here:
https://brainly.com/question/18084516
#SPJ4
a particle of mass m is located inside a uniform solid sphere of radius r and mass m, at a distance r from its center. (a) show that the gravitational potential energy of the system is (b) write an expression for the amount of work done by the gravitational force in bringing the particle from the surface of the sphere to its center.
The equation for the system's gravitational potential energy is U = − G * (m2 / R). and G * (m2 / R) is the amount of effort the gravitational force must do to move the particle from the sphere's surface to its centre.
(a) The formula U = - G * (Mm / r), where G is the gravitational constant, M is the mass of the sphere, and m is the mass of the particle, may be used to compute the gravitational potential energy of the system. Here, M = m U = - G * (m2 / R)
(b) The particle's initial potential energy when it is on the sphere's surface is Ui = - G * (m2 / R), and its final potential energy when it is in the sphere's centre is Uf = 0. Work completed equals Uf - Ui work completed equals 0 - (- G * (m2 / R)) work completed equals G * (m2 / R).
G * (m2 / R) represents the amount of effort the gravitational force must do to move a particle from the sphere's surface to its centre.
learn more about gravitational force here:
https://brainly.com/question/12528243
#SPJ4
the water is then released and passes through turbines to produce
The water released from the reservoir and passes through turbines to produce electricity.
What does the water do to the turbine?At the plant level, water flows through a pip also known as a penstock, and then spins the blades in a turbine, which, in turn, spins a generator that ultimately produces electricity.
What are water turbines called?Hydro turbines, it transform moving water's kinetic energy into mechanical energy, and this mechanical energy is converted into electricity using a hydropower generator. Hydropower turbines contain blades, which spin to produce electricity. Hydro turbines work on Faraday's principles.
To know more about electricity visit :
https://brainly.com/question/12791045
#SPJ4
When a turbine's blades are turned by water, electricity is produced and sent to the power plant's users.
What occurs as water flows through the turbine? To generate energy, which is then delivered to the power plant's clients, the water can be used to turn a turbine's blades.The inner shaft of the turbine is then turned by water flowing across its blades.Once transferred to a generator, this rotational motion is used to produce energy.Turbines come in a wide variety of designs, each of which is ideally suited for a particular use.Water flow energy is transformed into mechanical energy by a hydraulic turbine.Using a hydropower generator, this mechanical energy is transformed into electricity.Potential energy, often referred to as kinetic energy, is converted to mechanical energy by a hydroelectric dam from a water reservoir behind the structure.To learn more about turbine's blades refer
https://brainly.com/question/15321264
#SPJ4