Answer:
(2) 50 kg
(3) 73.75 J/kg.K
Explanation:
(2) From the question,
Using,
q = mcΔt........................ Equation 1
Where q = amount of heat, m = mass. c = specific heat capacity, Δt = change in temperature
make m the subject of the equation
m = q/(cΔt)..................... Equation 2
Given: q = 1.500 J, c = 1.0 J/kg.K, Δt = 30°C
substitute these values into equation 2
m = 1500/(1×30)
m = 50 kg
(3) using
q = cm(t₂-t₁).
Where t₁ and t₂ = initial and final temperature respectively
making c the subject
c = q/m(t₂-t₁)................ Equation 3
Given: q = 41.3 J, m = 16 g = 0.016 kg, t₂ = 80°C, t₁ = 45°C
Substitute these values into equation 3
c = 41.3/0.016(80-45)
c = 41.3/0.56
c = 73.75 J/kg.K
Question 10 of 10
After a person eats a sugary snack, his blood sugar levels may rise for a short
period of time. However, the body works quickly to return blood sugar levels
to normal. What is this an example of?
O A. Respiration
B. Homeostasis
C Ethics
D. Development
Which of the following ions will form the weakest bond with Na+?
Br^-
F^-
CI^-
I^-
Answer:
Iodide ion, I- will form the weakest bond with sodium ion, Na+
Explanation:
Electronegativity is the ability with which a neutral atom attracts electrons to itself.
The electronegativity of the halogens decrease on going down the group among the halogens. This is is because on going down the group, the atomic size as well as ionic size of the atoms in the group increases. This increase decreases the effect of the attraction of the positive nucleus on the electrons. Thus, valence electrons can be more readily removed.
The transfer of electrons from metallic sodiummto a halogen results in annionic bond between the two atoms. The strength of the ionic bond decreases on going down the group due to decrease in electronegativity. Thus, iodide ion, I-, which is the least electronegative among the given options will form the weakest bond with Na+.
How does the strength of a metallic bond compared to other types of bonds?
a. metallic bonds are weaker than ionic bonds or covalent bonds.
b. metallic bonds are equal in strength to ionic and covalent bonds.
c. metallic bonds are weaker than ionic bonds but stronger than covalent bonds.
d. metallic bonds are weaker than covenant bonds but stronger than ionic bonds.
While metallic bonds have the strong electrostatic force of attractions between the cation or atoms and the delocalized electrons in the geometrical arrangement of the two metals. ... Metallic bonds are malleable and ductile, while covalent bonds and ionic bonds non-malleable and non-ductile.
2 Al + Fe2O3 = Al2O3 + 2 Fe
If 0.915 mol Al2O3 is produced, how many grams of iron is produced?
Answer:
−7.389056fo3+5.436564f
−l2o3+2l
Explanation:
2al+f(2.7182822)o3=al2o3+2f(2.718282)
Step 1: Add -al^2o^3 to both sides.
7.389056fo3+2al+−al2o3=al2o3+5.436564f+−al2o3
−al2o3+7.389056fo3+2al=5.436564f
Step 2: Add -7.389056fo^3 to both sides.
−al2o3+7.389056fo3+2al+−7.389056fo3=5.436564f+−7.389056fo3
−al2o3+0fo3+2al=−7.389056fo3+5.436564f
Step 3: Factor out variable a.
a(−l2o3+2l)=−7.389056fo3+5.436564f
Step 4: Divide both sides by -l^2o^3+2l.
a(−l2o3+2l)
−l2o3+2l
=
−7.389056fo3+5.436564f
−l2o3+2l
a=
−7.389056fo3+5.436564f
−l2o3+2l
Chemistry test!!! no fake answers please and if you can explain then do it because I need all the help I can get!
Answer:
(−ΔH°1)+12(−ΔH°2)+(ΔH°3)+(ΔH°4)
I hope this helps you out!! :)
Find the kinetic energy of the horse using KE=1/2 mv².
A 500-kilogram horse runs at 5 meters/second. The horse’s kinetic energy is
[blank] joules.
Answer:
6250
Explanation:
so m=500 and v=5
so v²=25
using the equation we can do 1/2 x 500 x 25 = 6250
you may not want to wear a black shirt in the hot summer because light is
Answer:
The outer layer of fabric does get hotter because the black color absorbs more heat. And that heat doesn't get transmitted to the skin because of the thick fabric. But thin black clothing transmits that heat to the skin, making a person hotter.
Explanation:
chemistry:
plz help me:D
Answer:
1 atom only with the unit u.
Explanation:
The formula mass of a substance is defined as the sum of the atomic masses of all atoms in a formula unit of the particular substance in question.
Thus the correct answer is option A
A certain gas has a volume of 500.0 mL at 77.0°C and 600KPa. Calculate the temperature if the volume decreased to 400.0 mL and the pressure is increased to 760Kpa and assume the number of moles does not change.
Answer:
354.67K
Explanation:
Applying
P₁V₁/T₁ = P₂V₂/T₂................. Equation 1
Where Where P₁ = initial pressure, T₁ = Initial temperature, V₁ = Initial Volume, P₂ = Final pressure, V₂ = Final Volume, T₂ = Final Temperature.
From the question, we are ask to look for the final temperature,
Therefore we make T₂ the subject of the equation
T₂ = P₂V₂T₁/P₁V₁............. Equation 2
Given: P₁ = 600 kPa, V₁ = 500 mL, T₁ = 77 °C = (273+77) = 350 K, P₂ = 760 kPa, V₂ = 400.0 mL
Substitute these values into equation 2
T₂ = (760×400×350)/(600×500)
T₂ = 354.67 K
What are the characteristic property's of metals such as malleability and high conductivity are due to ?
Answer:
Metallic Bonding
Explanation:
Conductivity occurs when electrons or ions are free moving. The conductivity in metals is due to electrons being delocalized in a sea of electrons. Metals contain metallic bonding which allows the electrons to freely move.
Malleability happens when adjacent layers of positive ions move relative to one another while being in contact with the sea of electrons from the metallic bonding.
Initially a NaOH solution was standardized by titration with a sample of potassium hydrogen phthalate, KHC8H4O4, a monoprotic acid often used as a primary standard. A sample of pure KHC8H4O4 weighing 1.518 grams was dissolved in water and titrated with the NaOH solution. To reach the equivalence point, 26.90 milliliters of base was required. Calculate the molarity o
Answer:
0.2763M NaOH
Explanation:
Based on the reaction of hydrogen phtalate, KHP, with sodium hydroxide, NaOH:
KHP + NaOH → KNaP + H₂O
1 mole of KHP reacts per mole of NaOH.
In the equivalence point, the moles of NaOH added = Moles of KHP that were dissolved.
Thus, to solve this question, we must find the moles of KHP = Moles NaOH. With the moles and the volume of NaOH required to reach the equivalence point we can find molarity of NaOH solution:
Moles KHP = Moles NaOH (Molar mass KHP = 204.22g/mol):
1.518g * (1mol / 204.22g) = 7.433x10⁻³ moles NaOH
In 26.90mL = 0.0269L:
7.433x10⁻³ moles NaOH / 0.02690L
0.2763M NaOHWhat does corona mean?
Answer:
.
Explanation:
a 5 g ice cube starts life at -1 C if 2182.5 j are added to it what will be the final temperature upon his demise ?
Answer:
Final Temp = 23.92°C
Explanation:
ΔH(total) = (m·c·ΔT)ice + (m·ΔH(f))melt'g + (m·c·ΔT)water
2182.5j = (5g)(2.092j/g·°C)(1°C) + (5g)(334.56j/g) + (5g)(4.184j/g·°C)(ΔT)
(2182.5 - 10.46 - 1672.8)j = 20.92j/°C·ΔT
ΔT = (2182.5 - 10.46 - 1672.8)j / 20.92j/°C = 23.92°C
Since the melting ice starts and ends at 0°C and is then warmed to 23.92°C then the temperature change is also the final temp of the water based upon given energy input values.
Cool air over warm water will:
Increase in temperature
Stay the same in temperature
Decrease in temperature
Answer:
Air and Water Temperature Increases
An increase in the air temperature will cause water temperatures to increase as well. ... Lower levels of dissolved oxygen due to the inverse relationship that exists between dissolved oxygen and temperature. As the temperature of the water increases, dissolved oxygen levels decrease.
pls complete the table with the correct answer
Answer:
The correct answer is :
Natural fibres: these fibers are found naturally in the environment such as cotton, hemp or wool, all are made naturally found fibers.
sr. no. name type
1 Cotton natural
2 Linen natural
3 Silk natural
4 Wool natural
5. Hemp natural
Artificial fibres: made from the polymerization of their monomer unit for example polyester made from coal and petroleum products.
sr. no. name type
1 Polyester artificial
2 Rayon artificial
3 Spandex artificial
4 Acrylic artificial
5. microfibers artificial
De una misma estación salen, en el mismo instante, dos trenes, con velocidades constantes de 72 y 90 [km/h]. ¿Qué distancia separa ambos trenes luego de 2 horas de viaje si se mueven en la misma dirección ... a) ... Y en el mismo sentido de circulación?
Answer:
144 km y 180 km respectivamente.
Explanation:
¡Hola!
En este caso, dado que tenemos dos trenes con velocidades diferentes, es posible multiplicar la velocidad de cada tren por el tiempo común, con el fin the hallar la distance recorrida; es de entender, que a mayor velocidad, mayor distance ha de recorrer el tren:
[tex]d_1=72km/h*2h=144km\\\\d_2=90km/h*2h=180km[/tex]
Así, entendemos que el tren número 1 recorre 144 kilómetros, mientras que el tren número 2, 180 kilómetros.
¡Saludos!
Which statement describes the Arrhenius interpretation of acids and bases?
It has a wider range of applications than the Bronsted-Lowry interpretation.
It has a wider range of applications than the Lewis and Bronsted-Lowry interpretations.
It is used in situations that involve bases that do not produce hydroxide ions.
It is limited to situations that involve aqueous solutions or specific compounds.
Answer: Composition is an orderly arrangement of visual structures (elements and principles) to create a mood, add meaning and direct the viewers' attention to the purpose of the artwork. Compositions are said to be 'designed' according to the specific intent of the artist.
The statement that describes the Arrhenius interpretation of acids and bases is that it is limited to situations that involve aqueous solutions or specific compounds. Therefore, option D is correct.
What is Arrhenius's interpretation?Arrhenius's interpretation defined an acid as a substance that increases the concentration of hydrogen ions (H⁺) when dissolved in water and a base as a substance that increases the concentration of hydroxide ions (OH⁻) when dissolved in water.
According to Arrhenius's interpretation, when an acid is dissolved in water, it releases H⁺ ions, which then react with water molecules to form H₃O⁺ ions, also known as hydronium ions.
Similarly, when a base is dissolved in water, it releases OH⁻ ions, which then react with water molecules to form H₂O molecules and more OH⁻ ions. Thus, option D is correct.
Learn more about Arrhenius, here:
https://brainly.com/question/15196401
#SPJ5
when high pressure is applied to a gas, its
Answer: volume decreases
In a reaction, your actual product had a mass of 13.7 grams. You calculated that you need 29.3 grams to have the reaction go to completion. What is your percent yield?
Answer:
5.0
Explanation:
Identify the decay mode
Please answer asap no explanation needed
(Look at picture)
Answer:
1921 :3 espero y te ayude crack
10 POINTS
What is used to measure the volume of a solid with an irregular shape? O A. Gas displacement O B. Liquid displacement O C. Plasma displacement O D. Solid displacement
Answer:
Because many objects are not regularly shaped their volume cannot be determined using a volume formula. The volume of these objects can be found by water displacement. A volume of water sufficient to cover the object is placed in a graduated cylinder and the volume read. The object is added to the cylinder and the volume read again. The difference between the two volumes is the volume of the object. This method is demonstrated using the same battery used above.
Explanation:
A reaction in the laboratory yields 5.98 g KAI(SO2)2, How many moles of potassium aluminum
sulfate were produced?
Answer:
0.0308 mol
Explanation:
In order to convert from grams of any given substance to moles, we need to use its molar mass:
Molar mass of KAI(SO₂)₂ = MM of K + MM of Al + (MM of S + 2*MM of O)*2Molar mass of KAI(SO₂)₂ = 194 g/molNow we calculate the number of moles of KAI(SO₂)₂ contained in 5.98 g:
5.98 g ÷ 194 g/mol = 0.0308 molOnce a product is ready to be sold, engineers must explain their ideas to people who will bring the product to consumers.
Please select the best answer from the choices provided
ОТ
OF
Answer:
ot
Explanation:
there is no choices
Answer:
Advertise
Explanation:
once a product is ready to be sold, engineers explain their ideas to marketing people, who will advertise the product.
What is the molar mass of H2CO3
Answer:
Molar mass of H2CO3 : 62.03 g/mol
10 The graph below compares the density, in grams per cubic centimeter (g/cm'), of
four different substances.
DENSITY OF SUBSTANCES
20
15
Density (g/cm)
10
5.
0
w
Y
Z
Substances
Based on information from the graph, which of the following best compares the
physical properties of two of the substances?
F. Substance X has less mass than substance Y has.
G. Substance W has less volume than substance X has.
H. Substance Y would have less mass than substance Z would have if they had the
same volume.
1. Substance Z would have less mass than substance W would have if they had the
same volume.
Answer: the awnser is A
Explanation:
Edge 2020
✓ What kind of carbon storages would be the least affected by humans?
Answer:
trio
Explanation:
PLSSS HELP MEE
CH3COOH + Mg
CH3-COOH+MgO
CH3 -COOH + Mg(OH)2
CH3-COOH + MgCO3
Explanation:
CH3COOH + Mg --> Mg(CH3COO)2 + H2
CH3COOH + MgO --> H2O + Mg(CH3COO)2
CH3COOH + Mg(OH)2 --> H2O + (CH3COO)2Mg
CH3COOH + MgCO3 --> (CH3COO)2Mg + CO2 + H2O.
*equations are not balanced.
hope it helps. :)
2) Silk is a kind of ....... fibre
a) semisynthetic b) synthetic c) Animal d) Vegetable
*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆**☆*――*☆*――*☆*――*☆
Answer: Animal fibre
I hope this helped!
<!> Brainliest is appreciated! <!>
- Zack Slocum
*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆**☆*――*☆*――*☆*――*☆
Answer: c) Animal
Explanation: It is a protein based fibre so classified as animal fibre. Vegetable fibers are cellulose based.
BRAINLIEST AWARD
If 4.04g of N combines with 11.46g O to produce a compound with a molar mass of 216.0 g/mol, what
is the molecular formula of this compound?
Please explain and show work thank you
We first set about determining the empirical formula of the compound. From the principle of mass conservation, we can assume that the empirical compound contains 4.04 g of N and 11.46 g of O.
We now convert the mass of each element into the number of moles by dividing by the molar mass.
(4.04 g N)/(14.0067 g/mol) = 0.2884 mol N
(11.46 g O)/(15.999 g/mol) = 0.7163 mol O.
To find the empirical formula, we divide each molar quantity by the smaller of the two. That would be the number of moles of nitrogen.
(0.2884)/(0.2884) = 1
(0.7164)/(0.2884) = 2.48 ≈ 2.5.
To make both whole numbers, we multiply each numeral by 2:
(1)(2) = 2
(2.5)(2) = 5.
So, the empirical formula of our compound is N₂O₅.
To find the molecular formula of our compound, we must find the factor by which the molar mass of the actual compound differs from the molar mass of the empirical compound. The molar mass of the empirical compound, N₂O₅, is 108.01 g/mol. We are told that the molar mass of the actual compound is 216.0 g/mol. So, the two differ by a factor of (216.0 g/mol)/(108.01 g/mol) = 1.99 ≈ 2.
The molecular formula of this compound is thus N₂ₓ₂O₅ₓ₂ or N₄O₁₀.
You have an electrolyte that dissociates completely and conducts electricity well. What type of electrolyte would it be classified as?
Answer:
Strong Electrolyte
Explanation:
Electrolytes are classified into strong and weak electrolytes. Strong electrolytes are electrolytes that completely dissociate in an aqueous solution and are as well good conductors of electricity while weak electrolytes are those that are not completely dissociated in an aqueous solution and are not very good conductors of electricity.
Examples of strong electrolytes are strong acid, strong base, and salts. Examples of weak Electrolyte are weak acids and weak bases.
Thus the correct answer is strong electrolytes.