Answer:
helium
Explanation:
remaining three are efficient gas
Among the options given below, helium is not an efficient greenhouse gas. Thus, the correct option for this question is A.
What do you mean by Greenhouse gases?Greenhouse gases are those gases that significantly allow solar radiation in order to enter but prevent the escape of heat radiations of longer wavelengths. The names of common greenhouse gases are carbon dioxide, methane, nitrous oxide, CFCs, etc.
According to the context of this question, the presence of these gases in the atmosphere is responsible for the phenomenon of keeping the earth warm. This is known as Greenhouse effect. These gases stimulate the phenomenon of global warming.
Therefore, among the options given below, helium is not an efficient greenhouse gas. Thus, the correct option for this question is A.
To learn more about Greenhouse gases, refer to the link:
https://brainly.com/question/20349818
#SPJ2
Question 5 of 5
Which two phrases describe the nature of an electromagnetic force?
O A. Acts only when objects touch each other
B. Produced by interactions between magnetic objects
O c. Not a fundamental force of nature
O D. Produced by interactions between electrically charged objects
Answer:
I think it's A and D
Explanation:
I'm not sure if it's right
Answer:
The answer is B and D
Explanation:
trust fr
How many moles of each substance is produced when 7 moles of ammonium carbonate decompose?
(NH4)2CO3(s) ⟶ NH3(g) + CO2(g) + H2O(g)
Answer:
1. 14 moles of NH3 were produced.
2. 7 moles of CO2 were produced.
3. 7 moles of H2O were produced.
Explanation:
We'll begin by writing a balanced equation for the decomposition of ammonium carbonate, (NH4)2CO3.
This is illustrated below:
(NH4)2CO3(s) —> NH3(g) + CO2(g) + H2O(g)
There are 2 atoms of N on the left side and 1 atom on the right side. It can be balance by putting 2 in front of NH3 as shown below:
(NH4)2CO3(s) —> 2NH3(g) + CO2(g) + H2O(g)
Now the equation is balanced.
From the balanced equation above,
1 mole of (NH4)2CO3 decompose to produce 2 moles of NH3, 1 mole of CO2 and 1 mole of H2O.
1. Determination of the number of mole of NH3 produced.
From the balanced equation above,
1 mole of (NH4)2CO3 decompose to produce 2 moles of NH3.
Therefore, 7 moles of (NH4)2CO3 will decompose to produce = 7 × 2 = 14 moles of NH3.
Therefore, 14 moles of NH3 were produced.
2. Determination of the number of mole CO2 produced.
From the balanced equation above,
1 mole of (NH4)2CO3 decompose to produce 1 mole of CO2.
Therefore, 7 moles of (NH4)2CO3 will also decompose to produce 7 moles of CO2.
Therefore, 7 moles of CO2 were produced.
3. Determination of the number of mole of H2O produced.
From the balanced equation above,
1 mole of (NH4)2CO3 decompose to produce 1 mole of H2O.
Therefore, 7 moles of (NH4)2CO3 will also decompose to produce 7 moles of H2O.
Therefore, 7 moles of H2O were produced.
The degree of unsaturation, or index of hydrogen deficiency, is the number of pi bonds plus rings in a molecule. Specify the degree of unsaturation (index of hydrogen deficiency) of the following formulas:
(a) C5H6
(b) C10H6Cl2
(c) C4H3NO
Explanation:
The degree of unsaturation is given as;
Degree of unsaturation = (2C + 2 + N - H - X) / 2
(a) C5H6
Using the formular above;
Degree of unsaturation = [ 2(5) + 2 - 6] / 2
Degree of unsaturation = [ 12 - 6 ] / 2 = 3
(b) C10H6Cl2
Using the formular above;
Degree of unsaturation = [ 2(10) + 2 - 6 -2 ] / 2
Degree of unsaturation = [ 22 - 8 ] / 2 = 7
(c) C4H3NO
Using the formular above;
Degree of unsaturation = [ 2(4) + 2 - 3 -1 ] / 2
Degree of unsaturation = [ 10 - 4 ] / 2 = 3
Note: Oxygen is ignored because its presence has no effect on the degree of unsaturation.
Suppose you produce 0.0451 g of N 2 gas with a volume of 0.0413 L and a pressure of 0.991 atm at 298 K. Based on the experimental data, what is the value of the gas constant R ?
Ideal gas law is valid only for ideal gas not for vanderwaal gas. Therefore, value of the gas constant R is 0.0821LatmK⁻¹ when volume is 0.0413 L.
What is ideal gas equation?
Ideal gas equation is the mathematical expression that relates pressure volume and temperature.
Mathematically the relation between Pressure, volume and temperature can be given as
PV=nRT
where,
P = pressure of nitrogen gas = 0.991 atm
V= volume of nitrogen gas =0.0413 L
n =number of moles of nitrogen gas = given mass ÷Molar mass
=0.0451 g ÷28
=0.0016mol
T =temperature of nitrogen gas =298 K
R = Gas constant =?
0.991 atm×0.0413 L=0.0016×R×298 K
R=0.0821LatmK⁻¹
Therefore, value of the gas constant R is 0.0821LatmK⁻¹.
To learn more about ideal gas equation, here:
https://brainly.com/question/14826347
#SPJ2
A gaseous mixture contains 441.0 Torr H2(g), 387.3 Torr N2(g), and 74.5 Torr Ar(g). Calculate the mole fraction, ????, of each of these gases.
????H2=
????N2=
????Ar=
Answer:
XH₂ = 0.4885
XN₂ = 0.4290
XAr = 0.0825
Explanation:
Step 1: Given data
Partial pressure of H₂ (pH₂): 441.0 TorrPartial pressure of N₂ (pN₂): 387.3 TorrPartial pressure of Ar (pAr): 74.5 TorrStep 2: Calculate the total pressure (P)
The total pressure is equal to the sum of the partial pressures of all the gases.
P = pH₂ + pN₂ + pAr = 441.0 Torr + 387.3 Torr + 74.5 Torr = 902.8 Torr
Step 3: Calculate the mole fraction (X) of each gas
We will use the following expression.
Xi = pi / P
where,
Xi: mole fraction of the gas i
pi: partial pressure of the gas i
P: total pressure
XH₂ = pH₂ / P = 441.0 Torr / 902.8 Torr = 0.4885
XN₂ = pN₂ / P = 387.3 Torr / 902.8 Torr = 0.4290
XAr = pAr / P = 74.5 Torr / 902.8 Torr = 0.0825
Is nuclear fission exothermic or endothermic? Explain your answer.
Answer:
Exothermic
Explanation:
Nuclear fission means splitting, so there is a lot of energy being released.
Which of the following reactions will proceed as drawn below? (Yes or No)
Answer:
i wish i could help but t know either so i wish you luck for an answer once again truly sorry don'
Explanation:
i am sorry but i do not know :(
Two fruit flies that are heterozygous for body color and eye color are crossed. Brown body color is dominant to black body color. Red eye color is dominant to brown eye color.
Determine the genotypes of offspring 1-8.
1
2
3
4
5
6
7
8
A 4-column table has 4 rows. The labels of the columns are Upper B Upper E, Upper B e, b Upper E, b e. The labels of the rows are Upper B Upper E, Upper B e, b Upper E, Upper B b Upper E e. The first column has entries 1, Upper B Upper B Upper E e, 4, Upper B b Upper E e. The second column has entries Upper B Upper B Upper E e, 3, Upper B b Upper E e, 7. The third column has entries Upper B b Upper E Upper E, Upper B b Upper E e, 5, b b Upper E e. The fourth column has entries 2,Upper B b e e, 6, 8.
Answer:
the answer is simple
Explanation:
jnnn B upper up of the eye color
Answer:
1. BBEE
2. BbEe
3. BBee
4. BbEE
5. bbEE
6. bbEe
7. Bbee
8.bbee
Question: Can a penny dropped from a building kill a pedestrian below?
Hypothesis:
Controls:
Independent variable:
Dependent variable:
Conclusion:
Answer:
Hypothesis: IF a penny is dropped from a building, THEN it would kill a pedestrian below
Controls: Same building, Same distance
Independent variable: Penny
Dependent variable: Pedestrian's death
Conclusion: The hypothesis is rejected
Explanation:
- The hypothesis is a testable explanation to an observed problem or asked question. Based on the cientific question in this question, a possible hypothesis will be: IF a penny is dropped from a building, THEN it would kill a pedestrian below
- Independent variable is the variable that is changed or manipulated in an experiment. In this case, the PENNY is the independent variable
- Dependent variable is the variable that responds to the change made to the independent variable. It is the measured variable. In this case, the dependent variable is the DEATH OF PEDESTRIANS.
- Controls are those variables that is kept constant or unchanged throughout the experiment. The controls in this experiment are: Same building, Same distance of throw etc.
- The conclusion is whether the hypothesis is accepted or not depending on the result of the experiment conducted. In this case, the hypothesis will be rejected if the penny doesn't kill a pedestrian
which of the following determines an object’s ability to float in water?
a. how much the object weighs
b. what the mass of the object is
c. how dense the object is
d. the volume of the object
After heating the solution, you decant the liquid and wash the remaining solid with distilled water. What you are removing by this washing?
Answer:
The solvent
Explanation:
After the solid is recoverd by decanting the liquid, some solvent particles may still adhere to the solid.
In order to remove the solvent that may have adhered to the solid completely , the solid is washed before it is now dried.
In order to remove the remaining liquid present the solid material.
We are washing the solid in order to remove the liquid particles that is attached to the solid material with the help of water. Water is a universal solvent that dissolve large number of solutes in it.
Water removes the liquid from the solid by attaching with that liquid or dissolving in it so that's why we use water for washing a solid in order to remove the impurities from the solid material in which it is placed.
Learn more: https://brainly.com/question/18520645
20 POINTS PLEASE ANSWER ASAP!!!!
Why is calcium (Ca) in group 2, period 4 on the periodic table?
A Calcium, like all group 2 elements, is nonreactive and a gas at room temperature.
B Calcium, like all period 4 elements, is nonreactive and a gas at room temperature,
C Calcium, like all group 2 elements, is reactive and a solid at room temperature.
D. Calcium, like all period 4 elements, is reactive and a solid at room temperature.
Calcium (Ca) is in group 2 and period 4 on the periodic table be because Calcium has 2 valence electrons and 4 electron shell. Thus, calcium is a metal like all other group 2 element.
The correct answer to the question is Option C. Calcium, like all group 2 elements, is reactive and a solid at room temperature.
Calcium is a group 2 element majorly because it has 2 valence electrons. It is also in period 4 because it has 4 electron shells.
Being a group 2 element, calcium is a solid at room temperature and also reactive. All elements in the group 2 are metals.
There are other elements in period 4 which are not solid. For example krypton is an element in period 4 and it is a gas and not reactive.
From the above information, we can conclude that the correct answer to the question is:
Option C. Calcium, like all group 2 elements, is reactive and a solid at room temperature.
See attached image
Learn more: https://brainly.com/question/5979466
It has been hypothesized that a chemical known as BW prevents colds. To test this hypothesis, 20,000 volunteers were divided into four groups. Each volunteer took a white pill every morning for one year. The contents of the pill taken by the members of each group are shown in the chart below. What is the independent variable in this experiment? *
1. % Developing Colds
2. Number of Volunteers
3. Grams of sugar
4. Grams of BW
Grams of BW
i think thats irtu9rgirg
Independent variable in an investigation is the variable is does not depends on any other variable and on which we can have the control. Hence, the grams of BW is the independent variable here.
What is independent variables?In an experiment the parameters which changes by control or depending on other changes are called variables. There are two kinds variables namely dependant and independent variables.
The dependant variables are those variable which depends upon other variables and whose changes are studying with respect to certain parameters.
Independent variables does not depends on other variable and can be controlled by the researcher. Here, we are studying the % of developing cold with respect to the amounts of BW. The changing variable is BW amount on which the percentage of cold depends.
Therefore, the independent variable is grams of BW and dependant variable is % development of cold.
To find more on independent variables, refer here:
https://brainly.com/question/29430246
#SPJ5
he concentration of H2S in a saturated aqueous solution at room temperature is approximately 0.1 M. Ka1=8.9x10-8 Ka2=1.0x10-19 Calculate the pH of the solution in 2 sig figs
Answer:
PH = 4.0
Explanation:
We are given;
Ka1 = 8.9 × 10^(-8)
Ka2 = 1.0 × 10^(-19)
From the 2 values of K given above, we can see that Ka2 is far smaller than Ka1.
Thus, Positive hydrogen ion (H+) will be majorly formed from first dissociation which is Ka1.
Now, the breakdown of the H2S solution is;
H2S⇌[H+] + [HS−]
Thus;
Ka1 = [[H+] × [HS2^(-)]]/(H2S)
HS2^(-) also has a positive hydrogen ion.
Thus, we can rewrite as;
Ka1 = [[H+] × [H+]]/(H2S)
Ka1 = (H+)²/(H2S)
Concentration of H2S is given as 0.1M. Thus;
8.9 × 10^(-8) = (H+)²/0.1
(H+)² = 0.1 × 8.9 × 10^(-8)
(H+) = √(0.1 × 8.9 × 10^(-8))
(H+) = 0.00009433981
Now, PH is gotten from;
PH = -log (H+)
Thus;
PH = -log 0.00009433981
PH ≈ 4.0
explain the reason each step of the separation is performed with three portions of the solvent rather than with a single poriton of solvent
Answer:
Several extractions is more effective than a single extraction.
Explanation:
When extraction is carried out multiple times, for instance, in this case, the extraction was carried out with three portions of the solvent rather than with just a single portion of the solvent, the amount of material left in the residue will be lower, because the extraction is more complete.
Several extractions with smaller volumes of solvent are more effective than a single extraction with a large volume of solvent.
A car travels for 0.5 hours and goes 25 miles. What is the car's speed? (Remember sad + t)
Answer:
s = 22.352 m/s
Explanation:
Given data:
Time taken = 0.5 hours
Distance cover = 25 miles
Car speed = ?
Solution:
First of all we will convert the units.
1 hour = 3600 sec
0.5 hr ×3600 sec / 1hr = 1800 sec
miles to meter:
25 mi × 1609 m/ 1 mi = 40233.6 m
Formula:
s = d/t
s = speed
d = distance
t = time
Now we will put the values in formula.
s = 40233.6 m / 1800 sec
s = 22.352 m/s
A certain first-order reaction has a rate constant of 2.10×10−2 s−1 at 19 ∘C. What is the value of k at 58 ∘C if Ea = 82.0 kJ/mol ?
Answer:
K₂ = 1.12s⁻¹
Explanation:
Based on Arrhenius equation:
ln K₂/K₁ = -Ea/R (1/T₂ - 1/T₁)
Where K is rate constant,
R is gas constant (8.314J/molK),
T is absolute temperature (In K) Of 1, initial state and 2, final state.
ln K₂/K₁ = -Ea/R (1/T₂ - 1/T₁)
ln K₂/2.10x10⁻²s⁻¹ = -82000J/mol/8.314J/molK (1/(273.15 + 58) - 1/(273.15 + 19))
ln K₂ / 2.10x10⁻²s⁻¹ = 3.976
K₂ / 2.10x10⁻²s⁻¹ = 53.3
K₂ = 1.12s⁻¹
Which of the following is NOT an example of deposition?
sand dune
river delta
cave crystal
valley
This science btw
Answer:
Cave Crystal
Explanation:
I believe it's cave crystal because sand dunes, river deltas, and valleys are all examples of deposition.
A 25.00-mL aliquot of a nitric acid solution of unknown concentration is pipetted into a 125-mL Erlenmeyer flask and 2 drops of phenolphthalein are added. The above sodium hydroxide solution (the titrant) is used to titrate the nitric acid solution (the analyte). If 12.75 mL of the titrant is dispensed from a burette in causing a color change of the phenolphthalein, what is the molar concentration of the nitric acid solution? (Show all steps for calculating the answer.)
Answer: 0.0611 M HNO3
Answer:
0.0611M of HNO3
Explanation:
The concentration of the NaOH solution must be 0.1198M
The reaction of NaOH with HNO3 is:
NaOH + HNO3 → NaNO3 + H2O
1 mole of NaOH reacts per mole of HNO3.
That means the moles of NaOH used in the titration are equal to moles of HNO3.
Moles HNO3:
12.75mL = 0.01275L * (0.1198mol / L) = 0.0015274 moles NaOH = Moles HNO3.
In 25.00mL = 0.025L -The volume of the aliquot-:
0.00153 moles HNO3 / 0.025L =
0.0611M of HNO3A gas has a volume of 300 mL and a pressure of 2 atm. What volume will the gas occupy when the pressure is
increased to 7 atm (total)?
Answer:
The answer is 85.71 mLExplanation:
The new volume can be found by using the formula for Boyle's law which is
[tex]P_1V_1 = P_2V_2[/tex]
where
P1 is the initial pressure
P2 is the final pressure
V1 is the initial volume
V2 is the final volume
Since we are finding the new volume
[tex]V_2 = \frac{P_1V_1}{P_2} \\[/tex]
We have
[tex]V_2 = \frac{300 \times 2}{7} = \frac{600}{7} \\ = 85.714285...[/tex]
We have the final answer as
85.71 mLHope this helps you
When methylcyclobutane is treated with chlorine gas and heated, the total number of monochlorinated products, including stereoisomers, is
Answer:
5
Explanation:
The image attached shows the different monochlorination products obtained when chlorine gas is heated with methylcyclobutane.
We must keep in mind that the reaction occurs by free radical mechanism as shown in the image attached. The proportion in which the products are formed depends on the stability of the free radical intermediate leading to that particular product.
Image credit: askiitians
The molar mass of gallium (Ga) is 69.72 g/mol.
Calculate the number of atoms in a 27.2 mg sample of Ga.
Write your answer in scientific notation using three significant figures.
atoms Ga
Answer:
2.35 x 10²⁰ atoms Ga
Explanation:
After converting from mg to g, use the molar mass as the unit converter to convert to moles. Then using Avogadro's number, 6.022 x 10²³ convert from moles to atoms of Ga.
[tex]27.2mgGa*\frac{1g}{1000mg} *\frac{1 mol Ga}{69.72gGa} *\frac{6.022*10^2^3 atoms Ga}{1 molGa} = 2.349 * 10^2^0 atoms Ga[/tex]
Then round to 3 significant figures = 2.35 x 10²⁰ atoms Ga.
The number of atoms in 27.2 mg sample of Ga is 2.35 × 10²⁰ atoms
StoichiometryFrom the question, we are to calculate the number of atoms in a 27.2 mg sample of Ga.
First, we will determine the number of moles of Ga present
Using the formula,
[tex]Number\ of\ moles = \frac{Mass}{Molar\ mass} [/tex]
Mass = 27.2 mg = 0.0272 g
Molar mass = 69.72 g/mol
Then,
[tex]Number\ of\ moles \ of\ Ga = \frac{0.0272}{69.72} [/tex]
[tex]Number\ of\ moles \ of\ Ga = [/tex] 0.000390132 moles
Now, for the number of atoms present
From the formula
Number of atoms = Number of moles × Avogadro's constant
Then,
Number of Ga atoms = 0.000390132 × 6.022×10²³
Number of Ga atoms = 2.35 × 10²⁰ atoms
Hence, the number of atoms in 27.2 mg sample of Ga is 2.35 × 10²⁰ atoms
Learn more on stoichiometry here: https://brainly.com/question/14464650
The energy required to ionize boron is 801 kJ/mol. You may want to reference (Pages 93 - 98) Section 2.5 while completing this problem. Part A What minimum frequency of light is required to ionize boron
Answer:
The frequency is [tex]f = 2,01 * 10^{15} \ Hz [/tex]
Explanation:
From the question we are told that
The energy required to ionize boron is [tex]E_b = 801 KJ/mol[/tex]
Generally the ionization energy of boron pre atom is mathematically represented as
[tex]E_a = \frac{E_b}{N_A}[/tex]
Here [tex]N_A[/tex] is the Avogadro's constant with value [tex]N_A = 6.022*10^{23}[/tex]
So
[tex]E_a = \frac{801}{6.022*10^{23}}[/tex]
=> [tex]E_a = 1.330 *10^{-18} \ J/atom [/tex]
Generally the energy required to liberate one electron from an atom is equivalent to the ionization energy per atom and this mathematically represented as
[tex]E = hf = E_a[/tex]
=> [tex] hf = E_a[/tex]
Here h is the Planks constant with value [tex]h = 6.626 *10^{-34}[/tex]
So
[tex]f = \frac{1.330 *10^{-18}}{ 6.626 *10^{-34}}[/tex]
=> [tex]f = 2,01 * 10^{15} \ Hz [/tex]
Need help with 8 plssss
Answer:
c,a,b,d
Explanation:
Calculate the pH of a 0.02 M solution of ascorbic acid ( K a1 = 7.9 × 10 –5; K a2 is 1.6 × 10 –12).
a.
2.9
b.
8.2
c.
11.8
d.
11.1
e.
5.8
Answer:
C
Explanation:
ou are given a solution containing a pair of enantiomers (A and B). Careful measurements show that the solution contains 98% A and 2% B. What is the ee of this solution
Complete Question
You are given a solution containing a pair of enantiomers (A and B). Careful measurements show that the solution contains 98% A and 2% B. What is the enantiomeric excess?
Answer:
The value is [tex]k = 96 %[/tex]
Explanation:
From the question we are told that
The percentage of enantiomer A is A = 98%
The percentage of enantiomer B is B = 2%
Generally the enantiomeric excess is mathematically represented as
[tex]k = \frac{A -B}{A+B} * 100[/tex]
=> [tex]k = \frac{98 -2}{98+2} * 100[/tex]
=> [tex]k = 96 %[/tex]
Enter your answer in the provided box. A sample of an unknown gas effuses in 11.1 min. An equal volume of H2 in the same apparatus under the same conditions effuses in 2.42 min. What is the molar mass of the unknown gas
Answer: The molar mass of the unknown gas is 9 g/mol
Explanation:
From Graham's law of effusion rates, the rate of effusion of a gas is inversely proportional to the square root of its molar mass.
[tex]\frac{rate_1}{rate_2}=\sqrt{\frac{M_2}{M_1}} [/tex]
[tex]rate=\frac{volume}{time} [/tex]
Rate is volume effused per unit time. Since, the volumes are same, the formula could be written as:
[tex]\frac{t_B}{t_A}=\sqrt{\frac{M_B}{M_A}}[/tex]
Putting the values in the formula:
[tex]\frac{2.42min}{11.1min}=\sqrt{\frac{M_{H_2}}{M_A}} [/tex]
[tex]\frac{2.42min}{11.1min}=\sqrt{\frac{2}{M_A}} [/tex]
Squaring both sides:
[tex]\frac{2}{M_A}=0.218[/tex]
[tex]M_A=9g/mol[/tex]
The molar mass of the unknown gas is 9 g/mol
What is the momentum of a 1kg ball moving at 5m/s?
Answer:
5Ns
momentum= mass *velocity
=1*5
=5Ns
A major component of gasoline is octane (C8H18). When octane is burned in air, it chemically reacts with oxygen gas (O2) to produce carbon dioxide CO2 and water H2O. What mass of carbon dioxide is produced by the reaction of 7.58 g of octane? Please explain the answer to me like I'm five, I want to understand but the content makes no sense.
Answer:
Mass = 23.232 g
Explanation:
Given data:
Mass of C₈H₁₈ = 7.58 g
Mass of CO₂ produced = ?
Solution:
Chemical equation:
2C₈H₁₈ + 25O₂ → 16CO₂ + 18H₂O
Number of moles of octane:
Number of moles = mass/molar mass
Number of moles = 7.58 g/ 114.23 g/mol
Number of moles = 0.066 mol
Now we will compare the moles of CO₂ with octane from balance chemical equation.
C₈H₁₈ : CO₂
2 : 16
0.066 : 16/2×0.066 = 0.528
Mass of CO₂ produced:
Mass = number of moles × molar mass
Mass = 0.528 mol × 44 g/mol
Mass = 23.232 g
3. Which of the following molecules would want except to have a nonpolar covalent bond
Answer:
polar bonds are caused by different kind of atoms, because almost every atoms have different powers to attract electrons.
the answer will be the two same atoms, F2