3. What is a consideration when forcing interior walls?
A.
C.
D.
The wall coverings often hide interior metal framing.
The walls may be load-bearing and affect structural integrity.
Power tools must be used since all interior walls are reinforced.
Forcing the wall will require firefighters to work in a team of two.

The change in the kinetic energy of this object is 600 J, when an object of mass 10 kg is initially at rest, and 100 N force cause it move horizontally at a distance of 6 m.

Mass of the object = 10kg

Force = 100N

Distance = 6m

Change in kinetic energy of this object =Δ KE

Expression for the change in the kinetic can be given as follows:

Δ Kinetic Energy = W

,W is the workdone on the object.

This is given by the formula below,

W= F *d

Hence,

Δ KE = F × d

Δ K.E= (100N × 6m)

Δ K.E. = 600Nm

Δ K.E. = 600 Joule

Learn more about Kinetic energy:

https://brainly.com/question/26472013

#SPJ4

A solid disk of mass m and radius r undergoes an acceleration a The radius of the second disk is 4m.

The resistance of the body to acceleration (change of velocity) in the presence of a net force is also measured. The gravitational pull of an object to other bodies is also influenced by its mass.

The kilogramme serves as the mass basis unit in the SI (kg). In physics, mass is not the same as weight, despite the fact that weight is frequently measured using a spring scale as opposed to a balance scale and direct comparison with known masses to calculate mass. The lower gravity on the Moon causes an object to weigh less than it does on Earth, but it still has the same mass. Given that mass is a property of space rather than a force.

Learn more about mass here:

https://brainly.com/question/13961819

#SPJ4

Orthographic projection enables you to notice the surfaces and edges more clearly.

Means of representing three-dimensional objects in two dimensions is called Orthographic projection.

Orthographic views helps us to represent a 3D object in 2D on a drawing. It can show an object viewed from each direction.

An orthographic projection has three views:  front view, top view and side view. The right side is used for the side view but if the left side is used then it will be clearly labeled in the drawing. The final drawing is known as a 3 view drawing.

To know more about orthographic view, refer

https://brainly.com/question/28721913

#SPJ4

Answer:

Explanation:

L = g·t² / 2 = 9.8·4.0² / 2 = 78.4 m

The kinetic energy of the car in kilojoules is 447 KJ.

The kinetic energy of the car is, E = 1/2 m[tex]v^{2}[/tex]

The velocity of the car is,  v = v (1000m/3600s)

V = 23.5 m/s

The kinetic energy of the car in joules is,

E = 1/2m[tex]v^{2}[/tex]

E = 1/2 (1621)(23.5)

E = 447KJ

An object's kinetic energy is the power it draws from movement. It is described as the amount of effort required to accelerate a body of a specific mass from rest to its specified velocity. The body keeps its kinetic energy after gaining it during acceleration, barring changes in speed. When slowing down from its current pace to a condition of rest, the body expends the same amount of energy. Any term in a system's Lagrangiam that has a derivative with respect to time is formally referred to as having kinetic energy.

Learn more about kinetic energy here:

https://brainly.com/question/9349250

#SPJ4

If there is a distance between the object and the image, the focus length is -0.021cm.

A lens's focal length is established when it is focused at infinity. We can determine the magnification—how large individual elements will be—and the angle of view—how much of the scene will be captured—by knowing the focal length of the lens. The narrower the field of view and higher the magnification, the longer the focal length.

Distance from object to picture d= 30 cm.

object distance = 53cm

We must determine the object's distance.

u - v =d

u = 30+53

u = 83cm

We must determine the focus length.

Using the lens

1/f = 1/v -1/u

in the formula, include the value

1/f = 1/-30 -1/83

1/f = -0.021cm

To know more about focal length visit:

https://brainly.com/question/13090125

#SPJ4

She has probably lost some of her range of motion.So Full Range of Motion should she expect in her first yoga class back after such a long break.

Due to the distinctive design of our skeletal system, the range of motion is defined as the way our bodies move through space. especially how the bones adhere to one another at the joints. Because of each person's unique skeletal structure, every joint in the body has a defined range of motion. A joint's range of motion (ROM) refers to how far it can move actively or passively in a given direction. As opposed to passive ROM, which occurs when an external force moves the joint, active ROM occurs when muscles do so. There are active and passive joints (hip, knee, shoulder) and regions of the spine (neck). Performing yin yoga helps to dissolve adhesions in these tissues, restoring their ability to move freely. Vinyasa yoga extends your range of motion as well.

Learn more about range of motion here:

https://brainly.com/question/16231656

#SPJ4

Answer:372

Explanation:

The energy that is not transferred into the electrical grid is lost as heat as it moves from system to system.

The electricity that is produced in power stations reach the consumers through a complex system of electric cables and grid. The grid usually means transformers which is used to step up and step down the voltage when necessary.

The first transformer from the power plant steps up the voltage of the current for the purpose of long distance transmissions. Before entering the household another transformer steps down the voltage to avoid short circuiting the electrical appliances. During all these processes the current is carried through electrical lines. Due to its contact with the atmosphere some energy is lost has heat in the air.

Therefore, the energy that is not transferred into the electrical grid is lost as heat as it moves from system to system.

To know more about transformers

https://brainly.com/question/15200241

#SPJ1

Answer: density = 1.36g/cm3

Explanation: 0.025L = 25cm3 and 0.034kg = 34 grams

  Density= mass/volume

           = 34/25

           = 1.36g/cm3

Answer:

Explanation:

Given:

V = 0.025 l;   or V = 25 cm³

m = 0.034 kg = 34 g

______________

ρ - ?

ρ = m / V

ρ = 34 / 25 = 1.36 g/cm³

Answer:

8.2x10^2 Joules

Explanation:

Assuming that GPE means potential energy of the parachutist, and he/she is doing this on Earth, we can find their potential energy, (PE) with the equation:

PE  = mgh, where m is the mass of the parachutist in kilograms, g is the acceleration due to gravity [9.8 m/s2 for Earth (near surface)] and h is the height in meters.

m = 9.8 m/s^2

h = 12,000 meters (12 km)

m = 70 kg

PE = (70kg)(9.8 m/s^2)(12,000 m)

PE = 823,200 kg*m^2/s^2

PE = 8.2 x 10^2 kg*m^2/s^2

(1 kg*m^2/s^2) is the SI equivalent to a Joule.

The potential energy is 8.2x10^2 Joules

The time taken to reach the maximum height, given that the ball has an initial velocity of 22 m/s is 0.62 s

The time taken to reach the maximum height can be obtained by using the following formula:

t = uSineθ / g

Where

Now, we shall determine the time taken to reach the maximum as follow:

t = uSineθ / g

t = (22 × Sine 16) / 9.8

t = 0.62 s

Thus, the time taken is 0.62 s

Learn more about time to reach maximum height:

https://brainly.com/question/17209215

#SPJ1

Answer:

60 degrees

Explanation:

The ball must  be thrown at an angle 60°.

Given parameters:

Michael Hout of Ohio can run 110.0 meter hurdles in 18.9 s at an average speed of 5.82 m/s.

Hout throws a ball up and forward at twice his running speed and just catches it at the same level.

So, Speed of the ball = 2× 5.82 m/s. = 11.62 m/s.

The angle at which the ball thrown = θ.

According to the question,

Horizontal component of speed of the ball = Speed of  Hout

⇒  11.62 cosθ = 5.82

⇒ cosθ = 0.5

⇒ θ = 60°.

Hence,  the ball must be thrown at 60° angle.

Learn more about angle here:

https://brainly.com/question/28451077

#SPJ2

If you had a sugar cube that was made of white dwarf matter, it would weigh about as much as an elephant.

White dwarfs are the smallest type of stars in the universe, and they have a density of around 100 million times greater than that of water. This means that if you took a sugar cube that was made entirely out of white dwarf matter and put it on your kitchen counter, it would weigh about as much as an elephant!

But don't worry—you're not going to find any white dwarfs at your local grocery store or restaurant. White dwarfs are formed when red giants collapse in on themselves after burning through their fuel. And if you did happen to find one, you'd need a really big countertop.

To learn more about white dwarf visit: https://brainly.com/question/25981690

#SPJ4

A uniform circular motion is one in which the velocity of the object remains constant. This means that the object is moving with a constant speed and in a circle, without acceleration.

In this type of motion, the acceleration is zero. Acceleration is defined as a vector quantity, which means that it has both magnitude and direction. In this case, both magnitude and direction are zero, so there is no acceleration—the body moves in a straight line at constant speed in a circle.

A body has an acceleration when it is changing its velocity, either increasing or decreasing it. An example would be stopping on a highway, where your foot would push down harder on the gas pedal to increase your speed while going around a curve, then slowing down as you straightened out again.

To learn more about circular motion visit: https://brainly.com/question/2285236

#SPJ4

At equator line the speed of the star is 69115 m/s

When a big star runs out of heat and collapses, neutron stars are created. Every proton and electron in the star's core, or most central region, fuse into neutrons as it falls. These freshly generated neutrons can stop the collapse, leaving a neutron star behind, if the core of the collapsing star is between one and three solar masses.

Radius is 11 km

Period of rotation is 1 second

Converting radius to meters:

11 km = 11 x 10^3 = 11000m

We know that the velocity relation is v = 2πr/T

v = 2 x π x r / 1

v = 2π x 11000

v = 69115 m/s

Hence the speed of the star at the equator is 69115 m/s

Learn more about neutron star at

https://brainly.com/question/20815037?referrer=searchResults

#SPJ4

The coefficients of static and kinetic friction between crate and floor are

0.25 and 0.176 respectively.

When a body is at rest and if a force is applied to move it, then it would require the force which is equal to the static friction force, if

fs is the static frictional force and the us is the static friction coefficient and Fn is the normal force

[tex]f_{s}[/tex] = us*Fn

Fn = mg

putting the appropriate values, we get

=  71/(29*9.8) = 71/284.2

= 0.2498 = 0.25

Now, similarly when body is in motion, kinetic frictional force is applied, so we can write

[tex]f_{k}[/tex] = uk*Fn

so putting the appropriate values, we get

= 50/mg = 50/284.2 = 0.1759

= 0.176

Hence the value of coefficient of static friction is 0.25 and the value of coefficient of kinetic friction is 0.176.

To know more about Friction, visit here,

https://brainly.com/question/28356847

#SPJ4

All lines carrying current to and from a motor are passed through the window of a specialized current transformer known as a ground fault sensor in order to detect ground fault current.

Ground fault relays (or sensors) are used to detect ground faults with low magnitude. The control system instructs the circuit disconnect to open when the G.F. relay pick up setting is reached by the ground fault current magnitude and time.

An overvoltage relay can therefore be fitted to either directly monitor the voltage at the wye point or to detect the secondary voltage of a transformer that has been installed between the wye point and ground in order to identify the fault

No appreciable current will be created in the sensor secondary if all of the current to the motor returns through the lines in the sensor window.

To learn more about  ground fault detected refer to:

https://brainly.com/question/4675553

#SPJ4

Looking at your spectroscope, you see several discrete, clearly defined lines. The one possible source for this spectrum is fluorescent lamp.

What is fluorescent lamp?

A  fluorescent lamp is a low pressure mercury lamp or discharge bulb. When the light spectrum emitting from the fluorescent bulb fall on the spectroscope, it releases several discrete lines.

In this lamp, fluorescence source is used which produces visible light when it lights up.

Moreover, a fluorescent lamp alters electrical energy into chemical energy or light more efficiently than the incandescent lamp.

Simply put, fluorescent lamps are more efficient than other lamps and are mostly used for commercial and outdoor application as they use 75% less electricity.

If you need to learn more about spectrum click here:

https://brainly.com/question/23423065

#SPJ4

The curvature radius of the lens surface is 0.1089 meters.

The convex lens is a lens that converges rays of light that convey parallel to its fundamental axis (i.e. converges the incident rays toward the main axis) which is highly thick throughout the middle and skinny at the decrease and higher edges. the edges are curved outward in preference to inward.

Calculation:-

Since the double convex is symmetric in nature,

R₁ = R

R₂ = - R

Given, Refractive index (n) = 1.33

The focal length of the double convex lens (l) = 0.156

Now,

1/f = (n-1) (1/R₁ - 1/R₂)

1/f = (n-1) (1/R + 1/R)

1/f = (n-1) × (2/R)

R = 2(n-1)f

   = 2 × (1.33 - 1) × 0.165 meter

   = 0.1089 meter

Hence, the radius of curvature of the lens surface is    = 0.1089 meter

Learn more about the convex lenses here:-https://brainly.com/question/28039799

#SPJ4

The net displacement of a point on the blade's rim as a result of the deceleration is 10.0 in. or 0.254 m..

In reality, the term "deceleration" refers to an acceleration that has been reversed. We are aware that deceleration is the rate at which an object slows down and that acceleration is the pace at which an object accelerates. For instance, when we apply the brakes while driving, we are employing the benefits of deceleration to lower the speed of the car.

When we sense ourselves going forward in relation to the car while driving, we are decelerating. Deceleration in this context is a specific case of acceleration that only applies to moving things. It is hence the speed at which an object slows down.

Since acceleration must be reported as both a magnitude and a direction, it is a vector. Whenever there is one-dimensional motion.

Learn more about Deceleration here:

https://brainly.com/question/4403243

#SPJ4

The difference in the force exerted by the ground during a race between these two species is 259.25

Forces are influences that can change the movement of an object. A force can change the velocity of an object with mass, i.e. accelerate it. Forces can also be described intuitively by pushing or pulling. A force has both magnitude and direction and is a vector quantity.

Force exerted by the lion:

Normal force = mg

170 = m × 9.8

m = 17.34 kg

Forward force = ma

= 17.34 × 10.0

= 173.4 N

Total force = Normal force + Forward force

Total force = 170 + 173.4

= 343.4 N

Force exerted by the man:

Normal force = mg

75 = m × 9.8

m = 7.65 kg

Forward force = ma

= 7.65 × 10.0

= 76.5 N

Total force = Normal force + Forward force

Total force = 7.65 + 76.5

= 84.15 N

The difference in the forces exerted by these species is:

343.4 N - 76.5 N = 259.25 N

To know more about force visit:

https://brainly.com/question/19734564

#SPJ4

The value of the final angular velocity = 0.44 rev/s

Let Initial angular momentum = [tex]L_{i}[/tex]

Let Final angular momentum = [tex]L_{f}[/tex]

Here, mass of merry go round = [tex]m_{m}[/tex] = 120 kg

radius= r = 1.8 m

initial angular velocity = [tex]w_{i} = 1.2 \pi[/tex]rad/s

mass of the child = [tex]m_{c}[/tex] = 21kg

By law of conservation of angular momentum,

[tex]L_{i}=L_{f}\\\\I_{m}w_{i}=I_{m+c} w_{f}\\\\w _{f} =\frac{I_{m}w_{i}}{I_{m+c}}[/tex]

Here, substitute  [tex]I = \frac{mr^{2} }{2}[/tex]

[tex]w _{f} =\frac{I_{m}w_{i}}{I_{m+c}}\\\\w _{f} =\frac{\frac{m_{m}{r _{m}}^{2}}{2} w_{i}}{\frac{m_{m}{r _{m}}^{2}}{2}+{m_{c}r_{c}}^{2} }\\\\w _{f}= \frac{\frac{120(1.8)^{2} }{2} *1.2\pi}{\frac{120(1.8)^{2} }{2} +21(1.8)^{2}}\\\\w _{f} = 2.8 rad/s[/tex]

The value of the final angular velocity = 2.8 rad/s

                                                                =2.8/2 π

                                                                = 0.44rev/s

To learn more about angular velocity, refer:

https://brainly.com/question/20432894

#SPJ4

The Acceleration of the object = 6.4 m/s²

Mass of block (m) = 5 kg

Action force on block, (F₁) = 40 N

Frictional force opposing the motion (F₂) = 8 N

Acceleration of the object (a) = ?

⇒ Net force = Action force on block - Opposing friction force

⇒ F = F₁ - F₂

⇒ F = 40 - 8

⇒ F = 32 N

Net force of the block (F) = 32 N

Mass of block (m) = 5 kg

F is the Force in N.

m is the Mass in kg.

a is the Acceleration in m/s².

F = ma

⇛ a = F/m

⇛ a = 32/5

⇛ a = 6.4 m/s²

The magnitude of the acceleration of the car was 10m/s^2

what is magnitude?

Magnitude is defined in physics as an object's maximal size and direction. Magnitude is utilised in vector and scalar variables as a common factor. Scalar quantities, by definition, are those with only magnitude. Whereas vector quantities have both magnitude and direction.

Magnitude can be used in a variety of contexts. Some of them include

The magnitude of the earthquake

Charge magnitude on an electron

Force magnitude

The magnitude of the displacement

Gravitational force magnitude

acceleration (a)= v^2/r

v=speed

r=radius

d=diameter=500

r=d/2=500/2=250

a= 50^2/250

=10 m/s^2

Therefore the acceleration was found to be 10m/s^2

To learn more about acceleration follow the given link: https://brainly.com/question/25876659

#SPJ4

Saturn is undergoing an apparent retrograde movement period as the Earth moves closer to Saturn in its orbit and then both planets are located on the side of the Sun. Stars that are nearer to us will exhibit higher parallax, similar to how it occurs on Earth.

The star parallax of the Earth is quite modest, barely 0.03 seconds of arc. It would be difficult to see against the backdrop of stars, even with a good telescope.

The angle between the Earth's place at a single time of year and the Earth 6 months later, as determined from a nearby star, is known as the parallax angle. This angle is used by astronomers to calculate how far away that star is from Earth.

We may calculate the distance to a nearby planet using the method described before, s. Now, measuring from an observation point O, we determine the angle the planet occupies, which is. Therefore, P1P2=d, where d is the planet's diameter. As a result, we may use the parallax method to calculate the radius of a neighboring planet.

Learn more about stellar parallax at

https://brainly.com/question/13443669?referrer=searchResults

#SPJ4

The wide wood pores that link to the tree's roots allow sap to be drawn up into the maple tree when it starts to freeze. The tree is really replenishing itself with fluids at this time from its roots.

As long as the temperature is below freezing and the sap is increasing, the process continues.

Water is drawn up from the roots to the top of the plant according to the cohesion-tension hypothesis of sap ascent. Water and minerals travel upward from the roots through the xylem due to a negative water potential gradient created by the evaporation of mesophyll cells in the leaves.

The water potential gets increasingly negative as you climb the tree, and these variations provide a pull or tension that causes the water to ascend the tree. The loss of water from the leaves through a process called transpiration is a crucial element in the draw of water up the tree.

learn more about xylem tube refer

https://brainly.com/question/21022760

#SPJ13

Hello..!

The first law of thermodynamics relates work and transferred heat exchanged in a system through a new thermodynamic variable, internal energy. This energy is neither created nor destroyed, only transformed.

We can think of gas as a thermodynamic system, all because gases can work and absorb heat, and then they can turn all that into energy.

The formula for the change in energy is given by the first law of thermodynamics expressed as:

[tex] \: \: \: \: \: \: \: \: \: \: {\boxed{\boxed{ \sf\large \rm \Delta U = Q - W }}}[/tex]

Being:

Problem:

A gas receives from an external thermal source an amount of heat equal to 1000 J. This energy, in addition to producing heating in the gas, causes its expansion, with consequent performance of work equivalent to 600 J. What was the change in the internal energy of the gas? gas?

Data:

Now adding the data in the formula to find the energy change:

[tex] \sf\large \rm \Delta U = 1000J - 600J[/tex]

[tex] \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \sf{\boxed{\boxed{\large \rm \Delta U = 400 J}}}[/tex]

[tex]\begin{gathered}\rule{7cm}{0.01mm}\\\texttt{Good studies! :D}\\\rule{7cm}{0.01mm}\end{gathered}[/tex]

The hottest part of the atmosphere is called the thermosphere.

This region is the hottest because UV rays cause ionization, and because solar radiation is absorbed here, temperature rises with altitude.

To learn more about atmospheric layers refer to:

https://brainly.com/question/921955

#SPJ4