4
Find the probability that a randomly
selected point within the square falls in the
red-shaded circle.
11
22
P=[?]
22
Enter as a decimal rounded to the nearest hundredth.
Enter

About 4.24% of all samples of 26 of today's women in their 20s have mean heights of at least 63.36 inches.

Since the sample size is 26, we can use the central limit theorem and assume that the distribution of sample means is approximately normal with a mean of 62.8 inches and a standard deviation of 1.65 inches / sqrt(26) = 0.323 inches.

To find the percentage of samples with mean heights of at least 63.36 inches, we need to find the z-score corresponding to this value:

z = (63.36 - 62.8) / 0.323 = 1.74

Using a standard normal distribution table or calculator, we can find that the percentage of samples with z-scores greater than or equal to 1.74 is about 4.24%. Therefore, about 4.24% of all samples of 26 of today's women in their 20s have mean heights of at least 63.36 inches.

To learn more about  heights visit:

https://brainly.com/question/11735272

#SPJ11

Answer:

Step-by-step explanation:

A ray is a half-infinite line. The pairs of non-overlapping angles that share a ray to make a right angle are ∠FGE and ∠FGH.

Since, We know that;

A half-infinite line (also known as a half-line) with one of the two points and is commonly used to represent a ray. It is assumed to be infinite.

A straight line has an angle of measurement of 180°. And a 90° angle is made when two lines are perpendicular to each other.

As we can see the line EGH is a straight line, and FG is another line that is perpendicular to line EH,

Therefore, it will form two angles measuring 90°. These angles will be ∠FGE and ∠FGH.

Hence, the pairs of non-overlapping angles that share a ray to make a right angle are ∠FGE and ∠FGH.

Learn more about Ray visit:

brainly.com/question/17491571

#SPJ1

Answer:

8

Step-by-step explanation:

diameter=radius×2=4×2=8

Step-by-step explanation:

that means 2 blue or 2 red or 2 green.

12 marbles in total.

when the first marble is picked, there are only 11 left.

a probability is always the ratio of

desired cases / totally possible cases

the probabilty to pull first a blue marble is

5/12 = 0.416666666...

if that is the case, then the probabilty for the second marble to be blue too is

4/11 = 0.363636363...

(there are only 4 blue marbles in a total of 11 marbles).

and the probabilty for getting 2 blue marbles is

5/12 × 4/11 = 20/132 = 5/33 = 0.151515151...

the probabilty to pull first a red marble is

4/12 = 1/3 = 0.333333333...

if that is the case, then the probabilty for the second marble to be red too is

3/11 = 0.272727272...

(there are only 3 red marbles in a total of 11 marbles).

and the probabilty for getting 2 red marbles is

1/3 × 3/11 = 3/33 = 1/11 = 0.0909090909...

the probabilty to pull first a green marble is

3/12 = 1/4 = 0.25

if that is the case, then the probabilty for the second marble to be green too is

2/11 = 0.181818181...

(there are only 2 green marbles in a total of 11 marbles).

and the probabilty for getting 2 green marbles is

1/4 × 2/11 = 2/44 = 1/22 = 0.045454545...

the probabilty to have any of these 3 mutually exclusive cases (to get a pair of the same color) is the sum of the probabilities :

0.151515151... + 0.09090909... + 0.045454545... =

5/33 + 1/11 + 1/22 = 10/66 + 6/66 + 3/66 = 19/66 =

= 0.287878787...

The graph of the inequality is x + 2 ≥ 6 is plotted

Given data ,

Let the inequality equation be represented as A

Now , the value of A is

x + 2 ≥ 6

Subtracting 2 on both sides , we get

x ≥ 4

So , the inequality is x ≥ 4 and the graph is plotted

Hence , the inequality is x ≥ 4

To learn more about inequality equations click :

https://brainly.com/question/11897796

#SPJ1

To evaluate the integral of 5.3x^2 dx using trapezoidal rule with n = 10, we first need to break the interval [0, 5.3] into 10 subintervals of equal width. The width of each subinterval, h, is given by:

h = (b - a) / n = (5.3 - 0) / 10 = 0.53

where a = 0 is the lower limit of integration and b = 5.3 is the upper limit of integration.

Next, we need to calculate the function values at the endpoints of each subinterval. Let xi be the left endpoint of the ith subinterval, then:

x1 = 0
x2 = 0.53
x3 = 1.06
x4 = 1.59
x5 = 2.12
x6 = 2.65
x7 = 3.18
x8 = 3.71
x9 = 4.24
x10 = 4.77

Using these values, we can calculate the function values at each endpoint:

f(x1) = 5.3(0)^2 = 0
f(x2) = 5.3(0.53)^2 = 0.769547
f(x3) = 5.3(1.06)^2 = 6.119948
f(x4) = 5.3(1.59)^2 = 15.013238
f(x5) = 5.3(2.12)^2 = 28.451232
f(x6) = 5.3(2.65)^2 = 46.433928
f(x7) = 5.3(3.18)^2 = 68.961326
f(x8) = 5.3(3.71)^2 = 96.033426
f(x9) = 5.3(4.24)^2 = 127.650228
f(x10) = 5.3(4.77)^2 = 163.811732

Now, we can apply the trapezoidal rule formula to approximate the integral:

∫[0,5.3] 5.3x^2 dx ≈ h/2 * [f(x1) + 2f(x2) + 2f(x3) + ... + 2f(x9) + f(x10)]

Substituting the values we calculated above, we get:

∫[0,5.3] 5.3x^2 dx ≈ 0.53/2 * [0 + 2(0.769547) + 2(6.119948) + 2(15.013238) + 2(28.451232) + 2(46.433928) + 2(68.961326) + 2(96.033426) + 2(127.650228) + 163.811732]

∫[0,5.3] 5.3x^2 dx ≈ 614.660107

Therefore, the approximate value of the integral of 5.3x^2 dx using trapezoidal rule with n = 10 is 614.660107.

#SPJ11

Learn more about trapezoidal rule on: https://brainly.com/question/16996659

The equilibrium quantity of a follower firm in a market with a leading firm that produces the monopoly quantity is determined by the follower's reaction function. Specifically, the follower will choose a quantity that maximizes its profit given the quantity chosen by the leader.

Assuming that the follower's cost function is linear, the equilibrium quantity can be expressed as a function of the leader's quantity. Let Qf denote the quantity chosen by the follower and Ql denotes the quantity chosen by the leader. The follower's profit function can be written as:

πf = (P(Qf) - c)Qf

where P(Q) is the market price as a function of the total quantity produced (Q = Qf + Ql) and c is the follower's unit cost. The first-order condition for profit maximization is:

∂πf / ∂Qf = P(Qf) + Qf ∂P / ∂Q - c = 0

Solving for Qf, we get:

Qf = (1 / 2) (Qm - Ql)

where Qm is the monopoly quantity produced by the leader. This expression shows that the follower's equilibrium quantity is half of the deviation between the monopoly quantity and the quantity chosen by the leader. In other words, the follower's quantity is determined by the leader's deviation from the monopoly quantity.

Overall, the expression for the equilibrium quantity of a follower firm in a market with a leader that produces the monopoly quantity is Qf = (1 / 2) (Qm - Ql), where Qm is the monopoly quantity and Ql is the quantity chosen by the leader. This result highlights the strategic interdependence between the leader and the follower and the importance of anticipating each other's actions in a competitive market.

To learn more about Equilibrium quantity, visit:

https://brainly.com/question/16989820

#SPJ11

In this table, for every increase of 2 in the number of string instruments, there is a corresponding increase of 4 in the number of percussion instruments. Therefore, the ratio of string instruments to percussion instruments is always 2:1, indicating a constant of proportionality of 2.

However, rather than being started by plucking or sliding a bow across the strings, those vibrations on a piano are started by hammers striking the strings. Consequently, the piano is a type of percussion instrument. Because of this, the piano is now typically regarded as both a stringed and percussive instrument.

The table that shows a constant of proportionality of 2 for the ratio of string instruments to percussion instruments is:

String Percussion

2 4

4 8

6 12

Learn more about string instruments visit: brainly.com/question/29844951

#SPJ4

Correct Question:

Which table shows a constant of proportionality of 2 for the ratio of string instruments to percussion instruments?

Answer:

23 ft^3

Step-by-step explanation:

The volume would be the little box plus the big rectangle. The volume of the little box is 2*2*2 which equals 8. The volume of the second box is 1*3*5 which equals 15. The volume of the whole shape is 8+15=23ft^3.

Applying the definition of a linear pair, the value of n is calculated as: n =  41.33.

A linear pair consist of two angles that are on a straight line and also have a sum of 180 degrees.

The missing diagram is in the attachment provided below which shows the angles in question.

Angle 1 and (3n - 6) are two angles on a straight line, therefore, they are a linear pair. This also implies that they will have a sum of 180 degrees.

Therefore, we have:

62 + 3n - 6 = 180

Solve for the value of n:

56 + 3n = 180

3n = 180 - 56

3n = 124

n = 124/3

n = 41.33

Learn more about the linear pair on:

https://brainly.com/question/31376756

#SPJ1

As per the combination method, out of the 400 students surveyed, 380 students chose red as their favorite color.

To solve this problem, we can set up an equation. An equation is a statement that shows the equality between two expressions. In this case, we can write:

(Number of students who chose red) / (Total number of students) = 95/100

We can simplify 95/100 to 0.95. Multiplying both sides of the equation by 400 (the total number of students), we get:

Number of students who chose red = 0.95 * 400

Simplifying the right-hand side of the equation, we get:

Number of students who chose red = 380

To know more about combination here

https://brainly.com/question/28998705

#SPJ1

Blank 1: In this study, 5 treatment conditions were compared
Blank 2: There were 60 individuals who participated in the entire study

The Independent Samples t Test is extended by the One-way ANOVA (In independent samples t test used to compare the means between two independent groups, whereas in one-way ANOVA, means are compared among three or more independent groups).

Whereas a two-way ANOVA employs two independent variables, a one-way ANOVA just uses one.

Example of One-Way ANOVA You want to examine how three different fertilizer combinations affect crop yield as an agricultural researcher.

ANOVA comes in two primary flavours: one-way (also known as unidirectional) and two-way. ANOVA can also take several forms.

The mean of a quantitative variable is estimated using a two-way ANOVA in relation to the values of two categorical variables

Blank 1: In this study, 5 treatment conditions were compared (the number of conditions is one more than the first number in the F-statistic, which is 4).

Blank 2: There were 60 individuals who participated in the entire study (you can calculate this by adding the two numbers in the F-statistic and then adding 1,

so 4 + 55 + 1 = 60).

learn more about One-way ANOVA

https://brainly.com/question/30763604

#SPJ11

The actual sum of the quarter dollars is determined as $ 1.25.

The actual sum of the quarter dollars is calculated by summing up all the individual coins.

For the diagram given, we have a total of;

1 quarter dollar + 1 quarter dollar  + 1 quarter dollar  + 1 quarter dollar + 1 quarter dollar = 5 quarter dollars

A quarter dollar  or 1 quarter dollar = 25 cent = $0.25

The total sum of the quarter dollars is calculated as;

= $0.25 + $0.25 + $0.25 + $0.25 + $0.25

= $ 1.25

Thus, the total sum of the quarter dollars has been obtained in dollar equivalent.

Learn more about quarter dollars here: https://brainly.com/question/2331661

#SPJ1

Exponential kind of function best models the set of data points (-3, 18), (-2, 6), (-1, 2), (0, 11), and (1,27).

To figure out which sort of capability best models the given arrangement of pieces of information, we can plot them on a chart and outwardly review the state of the bend that interfaces them.

After plotting the given pieces of information, we can see that the bend that best fits them is certainly not a straight line (direct) or a parabola (quadratic), as it seems to bend all the more steeply. The bend that best fits these focuses is likewise not a steady capability (nothing unless there are other options), as the upsides of y change concerning x.

Consequently, the capability that best models the given arrangement of information focuses is a dramatic capability, which has a bend that increments or diminishes at a speeding up rate. An overall condition for a dramatic capability is:

y =[tex]ab^x[/tex]

where an and b are constants. We can utilize the given focuses to track down the upsides of an and b, and in this manner get the particular condition that models the data of interest.

To learn more about Exponential, refer:

https://brainly.com/question/31277575

#SPJ1

The dot plots are plotted and the heights are compared

Given data ,

The heights of the tennis and badminton teams are given

Tennis team’s height (in inches): 66, 67, 69, 70, 71, 73, 73, 74, 75, 75, 76

Range: 10

Mean: 71.73

Median: 73.00

Mode: [73,75]

Badminton team’s heights (in inches): 62, 62, 65, 66, 68, 71, 73

Range: 11

Mean: 66.71

Median: 66.00

Mode: [62]

Now , each data point in the dataset is represented by a dot placed above the corresponding value on the axis. If there are multiple data points with the same value, the dots are stacked vertically above that value.

So , the frequency of the plots are given

Hence , the dot plots are plotted and the graph is given

To learn more about dot plot click :

https://brainly.com/question/30986825

#SPJ1

Answer:

likely

Step-by-step explanation:

Probability is a measure of the likelihood of an event occurring. In this case, the event is selecting a chocolate chip cookie from the batch of chocolate chip, oatmeal raisin, and sugar cookies made by the baker.

The probability of selecting a chocolate chip cookie is given as P(chocolate chip) = 0.75.

This means that out of all the cookies in the batch, 75% are chocolate chip cookies.

Since this probability is greater than 0.5 (which represents an event that is equally likely and unlikely), we can interpret it as indicating that it is likely to randomly select a chocolate chip cookie from the batch. In other words, if we were to randomly select a cookie from the batch, it is more likely that we would get a chocolate chip cookie than any other type of cookie.

Therefore, the correct answer is B) Likely.

The likelihood of randomly selecting a chocolate chip cookie is B. Likely.

Probability simply means the chance that a particular thing or event will happen. It is the occurence of likely events. It is simply the area of mathematics that deals with the numerical estimates of the chance that an event will occur or that a particular statement is true.

From the information, the baker made a batch of chocolate chip, oatmeal raisin, and sugar cookies. If P(chocolate chip) = 75%.

The likelihood of randomly selecting a chocolate chip cookie from the batch is 0.75. This implies that it is likely.

Learn more about probability on:

brainly.com/question/24756209

The large drain can empty the tank on its own in 10 hours, while the small drain can empty the tank on its own in 16 hours.

Let's assume that the large drain can empty the tank in x hours. Then, according to the problem statement, the small drain can empty the same tank in x + 6 hours.

When both the large and small drains are opened together, they can empty the tank in 4 hours. This means that their combined rate of emptying the tank is 1/4 tank per hour.

We can set up two equations based on the rates of the individual drains and their combined rate:

1/x + 1/(x+6) = 1/4

Solving for x, we get x = 10 hours, which is the time it takes for the large drain to empty the tank on its own.

To find the time it takes for the small drain to empty the tank on its own, we substitute x = 10 in x+6, which gives us 16 hours.

Therefore, the large drain can empty the tank on its own in 10 hours, while the small drain can empty the tank on its own in 16 hours.

For more questions like Drain click the link below:

https://brainly.com/question/15840655

#SPJ11

The retailer only purchases the product when a customer places an order, which reduces the financial risks associated with holding inventory.

Drop shipping is a supply chain management method in which a retailer does not keep goods in stock but instead transfers orders and shipment details to a manufacturer, wholesaler, or another retailer, who then ships the goods directly to the customer.

In drop shipping, the retailer acts as an intermediary between the customer and the supplier, without actually holding any inventory. The retailer displays the products on their online store, and when an order is placed, the retailer forwards the order details and shipment information to the supplier. The supplier then ships the product directly to the customer.

To effectively implement drop shipping, the retailer needs to have a good relationship with the supplier who is responsible for shipping the product. The supplier must have an integrated e-procurement and e-commerce platform to receive orders and track inventory. The supplier must also have local warehousing or distribution centers close to the customer's location to ensure quick delivery and minimize shipping costs.

Having good relationships with transportation companies is also critical for the success of drop shipping. Retailers must have reliable shipping partners that can handle the transportation of goods from the supplier to the customer.

Overall, drop shipping allows retailers to offer a wider range of products to customers without the need for inventory management or warehousing. The retailer only purchases the product when a customer places an order, which reduces the financial risks associated with holding inventory.

To learn more about management visit:

https://brainly.com/question/30222076

#SPJ11

(NM)v_i = N(Mv_i) = Nv_i = v_i.

Thus, MN = NM = I, as required.

Yes, such a matrix N exists.

Since M^2 = M, we can write M(M - I) = 0. Therefore, the only possible eigenvalues of M are 0 and 1.

If M has any eigenvalue equal to 0, then the determinant of M is 0, which is not possible according to the problem statement. Hence, all eigenvalues of M are 1.

Since M is a 10 x 10 matrix, it must have a basis of 10 linearly independent eigenvectors corresponding to the eigenvalue 1. Let v1, v2, ..., v10 be such eigenvectors.

Now, we can define N as follows:

For any i and j, if i = j, then Nv_i = v_i.

For any i and j, if i ≠ j, then Nv_i = v_j.

It is easy to verify that this N satisfies MN = NM = I, the identity matrix.

To see this, note that for any i,

(MN)v_i = M(Nv_i) = Mv_i = v_i

and

(NM)v_i = N(Mv_i) = Nv_i = v_i.

Thus, MN = NM = I, as required.

To learn more about corresponding  visit:

https://brainly.com/question/29782346

#SPJ11

Probabilities are calculated by dividing the number of favorable outcomes by the total number of possible outcomes. In this case, we need to know what the experiment or event is, and what the probability distribution of the outcomes looks like. Space directors refer to the three coordinate axes x, y, and z, which are used to describe three-dimensional space. Vectors are quantities that have both magnitude and direction and can be represented by arrows or line segments in space.

To find the probabilities of getting the values +1 and -1 for each of the space directors (x, y, z) and each of the vectors (luz, ld, liz, 107, 117, 18), follow these steps:

1. Determine the total number of possible outcomes for each vector. For example, if luz has 3 possible outcomes (+1, 0, -1), the total number of outcomes is 3.

2. Count the number of occurrences of +1 and -1 in each vector. For example, if luz has 1 occurrence of +1 and 1 occurrence of -1, then there are 2 occurrences of interest.

3. Calculate the probabilities by dividing the number of occurrences of interest by the total number of outcomes. For example, for luz, the probability of getting +1 or -1 is 2 occurrences of interest / 3 total outcomes = 2/3 or approximately 0.67.

Repeat these steps for each of the space directors (x, y, z) and vectors (ld, liz, 107, 117, 18) to find the probabilities of getting the values +1 and -1.

Learn more about probabilities at https://brainly.com/question/13604758

#SPJ11

The median of the data-set 3, 3, 5, 7, 9, 9, 10, 10 is given as follows:

C. 8.

The median of a data-set is the middle value of a data-set, the value of which 50% of the measures are less than and 50% of the measures are greater than. Hence, the median also represents the 50th percentile of a data-set.

The data-set for this problem is given as follows:

3, 3, 5, 7, 9, 9, 10, 10.

The data-set has an even cardinality, hence the median is given by the mean of the two middle elements, as follows:

Median = (7 + 9)/2

Median = 8.

The data-set for this problem is given as follows:

3, 3, 5, 7, 9, 9, 10, 10.

More can be learned about the median of a data-set at brainly.com/question/3514929

#SPJ1

Answer: 204cm²

Step-by-step explanation:

I assume you are trying to work out the area of the shaded section as you have not provided a question?

1. To get the area of the whole rectangle we do length x width.

12 x 20 = 240.

2. To get the area of the triangle we do base x height, ÷ 2.

9 x 8 = 72

72 ÷ 2 = 36

3. Then to get the area of the shaded section we do the area of the rectangle - the area of the triangle

240 - 36 = 204

To calculate the percentage of the 250 ha paddock that can be sowed with 12.560 kg of wheat seed, we first need to determine how much seed is needed per hectare and this will give the answer 0.063%.

Given that the showing rate is 79.62 kg/ha, we can divide the total seed amount by the showing rate to get the number of hectares that can be sown with the given amount of seed:

12.560 kg / 79.62 kg/ha = 0.1576 ha

This means that 0.1576 hectares of land can be sown with 12.560 kg of wheat seed.

To calculate the percentage of the 250 ha paddock that can be sown, we can divide the sown land area by the total paddock area and then multiply by 100:

0.1576 ha / 250 ha x 100% = 0.063%

Therefore, you can sow approximately 0.063% of the 250 ha paddock with 12.560 kg of wheat seed, assuming a showing rate of 79.62 kg/ha.

Learn more about showing rate: https://brainly.com/question/19493296

#SPJ11

Answer:

$1,500

Step-by-step explanation:

167 x 9 = 1,503 rounded is 1,500 dollars

Hope this helps Good Luck

The values of the variables for the parallelogram include the following;

In Mathematics and Geometry, a parallelogram is a geometrical figure (shape) and it can be defined as a type of quadrilateral and two-dimensional geometrical figure that has two (2) equal and parallel opposite sides.

In this context, we can reasonably infer and logically deduce that this parallelogram has both pairs of opposite sides parallel to each other and the opposite angles (vertical angles) are equal and congruent.

By CPCTC, the variable x can be calculated as follows;

15x = 45°

x = 45°/15

x = 3

Since the diagonals of a parallelogram are perpendicular to each other, we have:

m<1 = 3y - 9 = 90

3y = 99

y = 33

15x = 18z

15(3) = 18z

45 = 18z

z = 45/18

z = 2.5

Read more on a parallelogram here: https://brainly.com/question/31416609

#SPJ1

Missing information:

The question is incomplete and the complete question is shown in the attached picture.

Answer:

If the first digit cannot be 8, there are 9 choices for the first digit (any digit from 1 to 9).

(a) If only odd digits are used, there are 5 choices for each of the remaining 6 digits (1, 3, 5, 7, or 9). Therefore, the total number of possible 7-digit telephone numbers with only odd digits is:

9 * 5 * 5 * 5 * 5 * 5 * 5 = 59,531,250

So there are 59,531,250 possible 7-digit telephone numbers if the first digit cannot be 8 and only odd digits are used.

Step-by-step explanation:

There are 50,000 possible 7-digit telephone number using only odd digits and with the first digit not being 8.

To determine the number of possible 7-digit telephone numbers using only odd digits and with the first digit not being 8, let's consider the following:

Odd digits: 1, 3, 5, 7, and 9
Number of odd digits: 5

a) Only odd digits are used:
For the first digit, there are 4 choices (1, 3, 5, and 7) since it cannot be 8. For the remaining 6 digits, we have 5 choices each (1, 3, 5, 7, and 9) since they can be any odd digit.

Step 1: First digit - 4 choices
Step 2: Second digit - 5 choices
Step 3: Third digit - 5 choices
Step 4: Fourth digit - 5 choices
Step 5: Fifth digit - 5 choices
Step 6: Sixth digit - 5 choices
Step 7: Seventh digit - 5 choices

To find the total number of possible 7-digit telephone numbers, multiply the number of choices for each digit together:

Total possibilities = 4 × 5 × 5 × 5 × 5 × 5 × 5 = 4 × 5^6 = 50,000

So, there are 50,000 possible 7-digit telephone numbers using only odd digits and with the first digit not being 8.

Learn more about number here:

brainly.com/question/16195818

#SPJ11

The average total cost when Q=1000 is approximately 1003.

To find the average total cost when Q=1000 and given the total cost function TC = 100 + aQ + bQ² with a = 3 and b = 1, follow these steps:

1. Plug in the values of a, b, and Q into the total cost function:
TC = 100 + 3(1000) + 1(1000)²

2. Calculate the total cost:
TC = 100 + 3000 + 1000000 = 1003100

3. Calculate the average total cost by dividing the total cost by the quantity (Q):
Average Total Cost (ATC) = TC / Q = 1003100 / 1000 = 1003.1

4. Round the average total cost to the nearest integer:
ATC ≈ 1003

So, the average total cost when Q=1000 is approximately 1003.

total cost functionhttps://brainly.com/question/16177487

#SPJ11

Answer:

x=4

Step-by-step explanation:

as it's an equilateral each side will equal the same so the 12x will be the same as 10x+8

12x=10x+8

2x=8

x=4

if u substitute x into each equation

12×4=48

10×4+8=48

they equal the same

so x=4

Answer:

The quotient of the rational expressions shown below is:

(x²-4-4x+4) / 1

Simplifying the numerator:

(x²-4-4x+4) = (x²-4x) + (4-4) = x(x-4)

Therefore, the quotient is:

x(x-4) / 1 = x(x-4)

Step-by-step explanation: