5. Which factor is a primary cause of seasonal changes on Earth? A) change in Earth's distance from the Sun B) change in the rate of Earth's rotation C) wobble of Earth's axis D) tilt of Earth's axis​

Answers

Answer 1

Answer:

Earth's tilted axis causes the seasons. Throughout the year, different parts of Earth receive the Sun's most direct rays. So, when the North Pole tilts toward the Sun, it's summer in the Northern Hemisphere. And when the South Pole tilts toward the Sun, it's winter in the Northern Hemisphere.

Answer 2

Answer:D Tilt of earths axis

Explanation:The seasons are caused by the tilt of the Earth's rotational axis away or toward the sun as it travels through its year-long path around the sun. The Earth has a tilt of 23.5 degrees relative to the "ecliptic plane"


Related Questions

Define the unit of current. Name the device which is used to measure

electric current in a circuit. plzz helpp​

Answers

Answer:

Explanation:

The Unit Of Current is defined as the flow of 1 coulomb of charge in one second . Its unit is Ampere.

An ammeter is a measuring device used to measure the electric current in a circuit. A voltmeter is connected in parallel with a device to measure its voltage, while an ammeter is connected in series with a device to measure its current.

Using your own words, explain energy.

Answers

Energy is the ability to do work

The diagram below shows four coastline locations on Earth with respect to the moon at a given time. Moon A B D C In this current position, which coastline(s) are experiencing a daily high tide? Only A O Only B O Both A and C Both B and D​

Answers

Answer: Only A

Explanation: The moon controls the tides because of its gravitational pull. The moon's gravitational pull is weaker than Earths that is why the moon's gravitational pull only effectts water on the earth.

if 3.75 moles of LiCl is added to 72.7 ml of water, what is the molarity?

Answers

Molarity = moles of solute/volume of solution in liters.

Our solution will have a volume of 72.7 mL, or 0.0727 L, since the addition of soluble LiCl will not appreciably affect the volume of the solvent.

Our solute is the LiCl, of which we have 3.75 moles.

Thus, the molarity of our LiCl solution will be (3.75 moles LiCl)/(0.0727 L) = 51.5 M LiCl.

Why do you think it is a bad idea to use taste, touch, or smell to identify an
unknown chemical?

Answers

Answer:

Because it can cause health problems or injuries to our sense organs.

Explanation:

Chemicals in the laboratory are made up of different constituents, which may be dangerous or injurious to health. This is the reason why safety measures or precautions have to be taken when working in the laboratory. One of those safety measures is that "one should never use taste, touch, or smell to identify an unknown chemical".

This is so because a chemical that is unknown amounts to the fact that what such chemical contains is unknown, hence, the chemical might have the ability to cause harm or injuries to the sense organ. For example, a conc. acid that is tasted will burn the tongue etc.

HURRY ILL GIVE BRAINLIEST!
Match the cause to its effect.

Answers

Answer:

Cattles are giving nutrition supply throughout the year----some animals require nutrient enhancement for health

calves are given colostrum at birth----newborns require antibodies from their mothers

I dont want to write, so you know what the last option is

Explanation:

:) hope this helps

1. You have 3.5L of a gas at 6 atm of pressure. The pressure drops to 2.4 atm, what is the new volume of
the gas?
I

Answers

Answer:

8.75 L

Explanation:

The new volume can be found by using the formula for Boyle's law which is

[tex]P_1V_1 = P_2V_2[/tex]

Since we're finding the new volume

[tex]V_2 = \frac{P_1V_1}{P_2} \\[/tex]

We have

[tex]V_2 = \frac{3.5 \times 6}{2.4} = \frac{21}{2.4} \\ = 8.75[/tex]

We have the final answer as

8.75 L

Hope this helps you

N2(g) + 2 O2(g) → 2 NO2(g)
Answer

Answers

Answer:

180.6

Explanation:

N2 (g) + 2O2 (g) → 2NO2 (g)   ΔH = 66.4 kJ

2NO (g) + O2 (g) → 2NO2 (g)  ΔH = -114.2 kJ

Hope this helped, and please mark as Brainliest :)

Please answer ASAP,

Why does the earth experience high tides?


High tides occur because Jupiter is in alignment with Saturn


The gravitational force of the moon attracts the water and solid earth, pulling them closer to the moon


The gravitational pull of the moon causes areas of water that bulge away from the earth.


High tides occur because the comet Neowise passed by Earth

Answers

Answer:

B

Explanation:

I took the test and GOT an A

Una solución hallar punto de vista física y punto de vista químico (sal) 50g de sal y 250 ml de agua hallar %m/m %m/v molalidad, molaridad, fracción molar del soluto y del solvente

Answers

Answer:

% m/m = 16.6%

% m/v = 20%

3.42 m (molalidad)

3.42 M (molaridad)

Fraccion molar del soluto = 0.06

Fraccion molar del solvente = 0.94

Explanation:

Nuestra solución está compuesta por:

Soluto: 50 g de sal

Solvente: 250 mL de agua.

%m/m %m/v molalidad, molaridad, fracción molar del soluto y del solvente son distintas formas de definir la concentración:

% m/m son los gramos de soluto cada 100 g de solución.

No sabemos la masa de solución pero con la densidad del agua (solvente), sabemos que los 250 mL contienen 250 gramos de solvente. (Densidad del agua 1g/mL). En conclusión, la masa de solución es 50 g + 250g = 300

% m/m = (50g /300g ) . 100 = 16.6%

Vamos a definir que el volumen de la solución es igual al del solvente: 250 mL.

% m/v = la masa de soluto, cada 100 mL de solución

= (50 /250) . 100 = 20 %

Molalidad, son los moles de soluto por cada kg de solvente.

Convertimos gramos a kg → 250 g . 1kg /1000g = 0.25kg

Convertimos la masa de soluto (sal) a moles.

NaCl → 50 g . 1mol/ 58.45g = 0.855 moles

m = 0.855 /0.25 → 3.42 m (molalidad)

Molaridad son los moles de soluto por cada L de solución.

Convertimos mL a L → 250 mL . 1kg / 1000mL = 0.25 L

sabiendo que los moles de soluto son 0.855, en este caso la molaridad es igual a la molalidad ( 3.42 M)

Para calcular la fracción molar, necesitamos moles de soluto y de solvente.

Ya contamos con los moles de soluto.

Moles de solvente: 250 g . 1mol /18g = 13.89 mol

Moles totales = 0.855 + 13.89 = 14.745

Fracion molar del soluto: (0.855/ 14.745) = 0.06

Fraccion molar del solvente: (13.89 / 14.745) = 0.94

PLEASEEEE HELPPP??????

Answers

B. Grass to grasshoppers to bird to fox

Hope that helps

Answer:

(B) Grasses to Grasshoppers to Birds to Foxes

Explanation

The unit for work is the _______ which is also called the ____________.

Answers

The unit for work is the J which is also called the Joule. I’m sorry if this is wrong.

If 35.4 liters of hydrogen gas are used, how many liters of nitrogen gas will be needed for the above reaction at STP?

Answers

Answer:

ujdbdbfbf fbFbsygtsjysnsgndhngsnsgnafbfa

please answer thx will mark brainliest if correct

Answers

Answer:

C

Explanation:

Gases have lowest forces of attraction.

Can someone plz help me with this one problem plz!!!!

Answers

Answer:

very top one is sunlight. 2nd top one is oxygen. 3rd top one is carbon dioxide. last one is water

4.2 L of a gas has a pressure of 560mmHg at 72⁰F. What is the temperature at760mmHg if the volume is still 4.2 L? (5 pts)

Answers

Answer:

The temperature at 760mmHg if the volume is still 4.2 L is 400.862 K

Explanation:

Gay Lussac's law indicates that when there is a constant volume, as the temperature increases, the pressure of the gas increases. And when the temperature is decreased, the pressure of the gas decreases. This law can be expressed mathematically as follows:

[tex]\frac{P}{T} =k[/tex]

Having an initial state 1 and a final state 2, the following is true:

[tex]\frac{P1}{T1} =\frac{P2}{T2}[/tex]

In this case:

P1= 560 mmHgT1= 72 F= 295.372 K (being 32 F= 273.15 K)P2= 760 mmHgT2= ?

Replacing:

[tex]\frac{560 mmHg}{295.372 K} =\frac{760 mmHg}{T2}[/tex]

Solving:

[tex]T2= 760 mmHg*\frac{295.372 K}{560 mmHg}[/tex]

T2= 400.862 K

How is the periodic table used to determine properties of elements

Answers

Answer:

I don't know

Explanation:

hindi ko alam

Sam did an experiment. He boiled water in a teapot and saw vapor coming out. When he placed a cold plate in contact with the vapor it formed droplets of water.? Can you imagine what was that process and Why did he observe this?

Answers

Answer:

evaporation and condesation

Explanation:

because he was curiuos

What is simple chemical test could you carry out to see if carbon dioxide has been produced

Answers

Carbon Dioxide

A positive test will result in the lime water turning milky. Lime water turns milky as the Calcium hydroxide (chemical name for limewater) reacts with carbon dioxide to form Calcium Carbonate which is insoluble in water and thus forms a milky white precipitate.

The answer is lime water turning milky ;)

What does chlorination do?

Answers

Answer: Chlorination is the process of adding chlorine to drinking water to kill parasites, bacteria, and viruses. Different processes can be used to achieve safe levels of chlorine in drinking water.

Our Solar System consists of our star, the Sun, and its orbiting planets (including Earth), along with numerous moons, asteroids, comet
material, rocks, and dust. However, our Solar System is only part of space. Place the following in order from biggest to smallest.

A) Galaxy, Universe, Solar System, Star, Planet

B) Universe, Solar System, Galaxy, Planet, Star

C) Solar System, Universe, Galaxy, Star, Planet

D) Universe, Galaxy, Solar System, Star, Planet

Answers

Answer:

D

Explanation:

Universe consits of galaxies, galaxies consit of solar systems, and solar systems consist of planets

Answer: The answer would be B) Universe, Galaxy, Solar System,Planet Star

Explanation: The universe consists of all of these states of matter, The Milky Way itself is a galaxy,a solar system is made of planets and stars are tiny balls of gas!

The way the answer is correct and presented is because they are in order by size! For example the universe is infinite our solar system is only made of planets so that would be likely a galaxy is just made up of stars a planet is just a ball of gas with matter or something inside of it and a star just a tiny ball of gas made dust

What are the controlled, independent, and dependent variables in a basic density column experiment?

WILL MAKE BRAINLIEST

Answers

Answer:

The Independent Variable is what we change or control in the experiment. The Dependent Variable is what we are testing and will be measured in the experiment. The Control Variables are what we keep the same during the experiment to make sure it's a fair test. hope this helps =)

Explanation:

HELP ASAP!!!
WAVES ALWAYS ORIGINATE WITH SOME
a
person
b
object
C
disturbance

Answers

Answer:

Disturbance

Explanation:

I believe it is Disturbance because waves are normally caused by wind, and wind classifies as Disturbance.

Version: TAKEHOME
1) The ionic compound below is soluble in water. Complete the following:
-Draw the interaction of the ionic compound and water in the proper orientation. 3pts
-On the line below discuss the strength of the interaction within the compound compared to the strength of interaction
between the compound and water.

Answers

Answer:

The hydrogens of the water molecules around the bromide ion will need to be faced toward it, whereas the oxygens of the water molecules around the potassium ion will need to be faced toward it.

The strength of the interaction within the compound will supersede that of the interaction between the compound and water.

Explanation:

To answer this question, you need to be aware of the structure of a water molecule and its components. A water molecule has the chemical formula of H2O, and oxygen is inherently electronegative, meaning that it attracts electrons very strongly. As a result, when it is in H2O, it pulls the valence electrons of the H atoms very strongly, which results  in the H atoms being partially positively charged and the O atom being partially negatively charged. Therefore, the O atom is going to be attracted to the potassium ion, whereas the H atom is going to be attracted to the bromide ion.

The answer to the second part of the question is as written above because ionic bonds are stronger than ion-dipole bonds; that's just the way it is.  

Chlorine has two stable isotopes, C1 and C If Cl has a mass of approximately 34.97 and Cl has a mass of approximately 3697 what percent abundances are each found in?

Answers

Answer:

%C₁ = %C₂ = 50%

Explanation:

Set up simultaneous equations to solve for two unknowns,

let f₁ and f₂ = fractional abundances of C₁ and C₂ respectively.

Then f₁ + f₂ = 1.00  and

34.97f₁ + 36.97f₂ = Wt. Avg. Atomic Mass (amu) = (34.97 + 36.97)/2 = 35.97amu

Solve equation 1 for f₂ = 1 - f₁ and substitute into equation 2

=> 34.97f₁ + 36.97(1 - f₁) = 35.97

=> 34.97f₁ + 36.97 - 36.97f₁ = 35.97

=> 2f₁ = 1

=> f₁ = 1/2 = 0.50 => 50% abundance for C₁

=> f₂ = 1 - 0.50 = 0.50 => 50% abundance for C₂

____________ is refining the extracted raw metals into a purest form

Answers

Answer:

Extractive metallurgy

Explanation:

Extractive metallurgy is the practice of removing valuable metals from an ore and refining the extracted raw metals into a purer form.

CH3OH can be synthesized by the reaction:
CO(g) + 2 H20) — CH3OH)
What volume of CH3OH gas (in L) can be synthesized if 18.6 L of Hy gas completely reacts at STP conditions?

Answers

Answer:

5

Explanation:

Which statement describes proper conduct in the laboratory?
Select one:
O a. Eating snacks in the laboratory is allowed.
O b. In order to identify things they should be tasted.
O c. Colorless fumes should be identified by direct smelling.
O d. Be aware of the location of safety and first aid equipment.

Answers

Answer:

D.

Explanation:

I mean. It's logic for sure

Answer:

Its D and pls mark brainliest

Explanation:

CO(g) + O2(g) CO2(g)

Consider the unbalanced equation above. What is the maximum mass of carbon dioxide that can be formed when 1.45 g of CO and 2.00 g O2 react?

Answers

CO(g) + O2(g) CO2(g)

Consider the unbalanced equation above. What is the maximum mass of carbon dioxide that can be formed when 1.45 g of CO and 2.00 g O2 react?

CH4O+ O2 → CO2 + H2O
Balance the following chemical equation

Answers

Answer:

2 CH4O + 3 O2 = 2 CO2 + 4 H2O

Other Questions
help with these four multiple choice pls Evaluate (8 x 10-3) +0.45 (7 X 10-2). Write your answer inscientific notation. what was one major cause of the prosperity of the 1950's? Help please! Thank you will make brainly PLEASE HELP!!!!!!!!!!!!!!!!! A gum ball machine has 25 red gum balls, 30 green gum balls, 15 yellow gum balls, and 20 blue gum balls. If Peter puts 1 coin in the machine and gets 1 gum ball, what is the probabllity that the gum ball will not be red? What did the Iroquois do when the beaver population declined in the middle of the seventeenth century?They moved east. They moved west. They moved south. Describe things you used to do as a child (using the imperfect tense). Use regular and irregular verbs. 1. Cmo eras cuando eras nio/a? 2. Cmo eres ahora? How many lines of symmetry does the figure below have? if 100 ml of rat poison is mixed with 2,5l of water then what would be the simplified poison water ratio Senor Certificate (NSC) this The length of a rectangle is five times its width.If the perimeter of the rectangle is 60 cm, find its length and width.length: 7 cm?width: 1cm Joey compared the cost of 9 different toys.$2, $8, $4, $7, $8, $5, $8, $4, $6What is the median cost of the books?Question 1 options:$8$5$6 1. On Friday, I will meet Joe for lunch,Your answerWhat is the prepositional phase pls answer this plssssssssssss I need help ASAP plzzzz help What is sin(sec^-1 (u)) Mackenzie is searching for information on the effects of self-driving vehicles on people who live in rural areas. She is unable to find enough material on the topic.Which adjustment can Mackenzie make to improve her research plan?Revise her timeline for conducting research.Make her topic narrower in focus.List possible roadblocks to her research.Revise her research question to be broader. Use the equation n = 10m - 9 to find n when m = 3. Please help me with this question