6. Kaylee borrows $700 from her dad to buy a new phone.
She has to pay him back in 24 months with a 2% simple
interest rate. How much inter
interest rate. How much interest will she have to pay?

according to the question the probabilities of event can be P(s)= 14/2525, P(C) = 6/2525, P(S and C) = 5/2525, P(S or C) = 3/505

Probability theory, a subfield of mathematics, quantifies the likelihood that an event is going to happen or that a statement is true. The probability for an event is a number between 0 and 1, where 0 roughly denotes how probable the event is to occur and 1 denotes certainty. A probability is a numerical representation of the likelihood that a certain event will occur. In addition to numbers from 0 to 1, probability values can also be stated as percentages between 0% and 100%. the fraction of an entire set of equally likely possibilities that result in a certain occurrence out of all possible outcomes, expressed as a ratio.

given,

To solve the problem, we can use the formula:

P(A and B) equals P(A) plus P(B) minus P(A or B)

where P(A) is the probability of event A, P(B) is the probability of event B, and P(A or B) is the probability of either A or B occurring (including the case where both A and B occur).

P(S): the probability that a student writes steak is 14/2525.

P(C): the probability that a student writes chicken is 6/2525.

The likelihood that a student would write steak plus chicken equals 5/2525.A or B. P(A and B) Equals P(A) +P(B), which -P(P(S or C))

P(S or C): the probability that a student writes steak or chicken can be calculated as:

P(S or C) = P(S) + P(C) - P(S and C)

= (14/2525) + (6/2525) - (5/2525)

= 15/2525

= 3/505

Therefore, the answers to the questions are:

P(S) = 14/2525

P(C) = 6/2525

P(S and C) = 5/2525

P(S or C) = 3/505

To know more about probability visit:

https://brainly.com/question/11234923

#SPJ1

1. 1001 (in base 2) - 111 (in base 2) = 2 (in base 2).

2. 313 (in base 4) - 123 (in base 4) = 210 (in base 4).

3. 234 (in base 5) - 12 (in base 5) = 222 (in base 5).

What is arithmetic sequence?

An arithmetic sequence is a sequence of numbers in which each term after the first is found by adding a fixed constant number, called the common difference, to the preceding term.

To perform the subtractions in different bases, we need to convert the numbers to the same base and then subtract them.

1. 1001 (in base 2) - 111 (in base 2):

First, we need to align the two numbers by adding leading zeros to the second number:

1001

0111

0010

Therefore, 1001 (in base 2) - 111 (in base 2) = 2 (in base 2).

2. 313 (in base 4) - 123 (in base 4):

Again, we need to align the two numbers by adding leading zeros to the second number:

313

123

210

Therefore, 313 (in base 4) - 123 (in base 4) = 210 (in base 4).

3. 234 (in base 5) - 12 (in base 5):

Once again, we need to align the two numbers:

234

012

222

Therefore, 234 (in base 5) - 12 (in base 5) = 222 (in base 5).

To learn more about arithmetic sequence from the given link:

https://brainly.com/question/15412619

#SPJ1

Answer:

26

Step-by-step explanation:

You just divide 133 and 5 and you get 26.6

Answer:

26

Step-by-step explanation:

[tex]\frac{133}{5}[/tex] = 26.6

You cannot buy part of a book, so you can buy 26 books

26 x 5 = 130.  You will have $3.00 left over.

Helping in the name of Jesus.

There have been numerous cases of athletes being accused of using performance-enhancing drugs, and the numbers may vary depending on the sport, country, and time period in question.

Additionally, determining how many athletes were using or not using performance-enhancing drugs would require specific information on individual cases.

Regarding the percentage of athletes falsely accused of using performance-enhancing drugs, it is difficult to determine an accurate figure without examining each case in detail. False accusations may occur due to various reasons, such as flawed testing procedures or contaminated supplements, and the percentage of false accusations may vary depending on the situation.

If you have a specific case or sport in mind, I can try to provide you with more information on that topic.

For more questions like drugs visit the link below:https://brainly.com/question

#SPJ11

Let x be the number of laps Jada plans to swim.

According to the problem, 4 laps is 2/5 of the number of laps she plans to swim, so we can write:

4 = 2/5 * x

To solve for x, we can first multiply both sides by the reciprocal of 2/5, which is 5/2:

4 * 5/2 = x

Simplifying the left side:

10 = x

Therefore, Jada plans to swim 10 laps.

Answer:

The area of Jack's rhombus is four times the area of Soshi's rhombus.

Step-by-step explanation:

First, calculate the area of Soshi's rhombus. Use the formula for the area of a rhombus:

[tex]A = bh=\\A=(12)(10)=\\A=120[/tex]

Now, we have the Soshi's rhombus is 120 [tex]in^2[/tex].

Jack's rhombus' base and height are double those of Soshi's; multiply each value by two.

[tex]12*2=24\\\\10*2=20[/tex]

Now, substitute the values in the formula for the area of a rhombus:

[tex]A = bh=\\A=(24)(20)=\\A=480[/tex]

Notice that 480 is 4 times 120.

This is because area is a two-dimensional measure (measured in units squared, like [tex]in^2[/tex]) while length is a one-dimensional measure (measured in regular units, like cm and in), The one-dimensional measures of Jack's rhombus are double those of Soshi's, and to translate this to the two-dimensional measure of area, square 2 (2 squared is 2 times 2).

2 squared is 4, so:

the area of Jack's rhombus is four times that of Soshi's.

The answer to this question is  0.1754

The rate at which the gray whale swims is 6.7 kilometers per hour.

What is the equation that relates the distance, rate, and time?

The equation that relates the distance, rate, and time is distance = rate × time

This equation can be used to calculate any one of the three variables if the other two are known.

For example, if you know the rate at which an object is moving and the time it has been moving, you can use this equation to find the distance it has traveled. Or, if you know the distance traveled and the time it took to travel that distance, you can use this equation to find the average rate of travel.

We are given that the distance traveled by the gray whale is 161 kilometers in 24 hours. Therefore, we can use the equation to find the rate at which the gray whale swims,

rate = distance / time = 161 km / 24 h ≈ 6.7 kph

Rounding to the nearest tenth, the rate at which the gray whale swims is approximately 6.7 kilometers per hour.

Learn more about the equation of distance, rate and time?

https://brainly.com/question/26046491

#SPJ1

The independent events are the ones in the third option, spinning the spiner twice.

Two events are called independent if the outcome of the first event does not affect the outcome of the second event.

From the given options, the only two that are independent are spining the spinner two times.

For example in the case of the candy, when you pull one candy and eat it, you can't pull it again, so the outcomes for the second event are modified.

In the case of the spinner that does not happen, that is why the events are independent.

Learn more about independent events.

https://brainly.com/question/22881926

#SPJ1

[tex]\sin(X )=\cfrac{\stackrel{opposite}{36}}{\underset{hypotenuse}{45}}\implies \sin(X )=\cfrac{4}{5} \\\\\\ \cos(X )=\cfrac{\stackrel{adjacent}{27}}{\underset{hypotenuse}{45}}\implies \cos(X)=\cfrac{3}{5} \\\\\\ \tan(X )=\cfrac{\stackrel{opposite}{36}}{\underset{adjacent}{27}}\implies \tan(X)=\cfrac{4}{3}[/tex]

If the decision variables for a problem have to be integers, rounding the linear programming optimal solution for that problem will always result in a feasible solution.

However, this solution may not always be optimal. It may result in either a feasible or infeasible solution depending on the problem constraints.

Rounding may also result in an optimal solution if the optimal solution happens to already have integer values for the decision variables. Therefore, rounding may result in a feasible and optimal solution or just a feasible solution but not necessarily always optimal.

Learn more about variables:

https://brainly.com/question/28248724

#SPJ11

In a right triangle, tangent of one of non-right angles is equal to  ratio of the length of opposite side to the length of  adjacent side. The tangent of angle M is 5/3.

In this case, we want to find  tangent of angle M.

Let's label the sides of  triangle opposite, adjacent, and hypotenuse, as follows:

Opposite: side LM, which is opposite to angle M.

Adjacent: side MN, which is adjacent to angle M.

Hypotenuse: side LN, which is the longest side and opposite to the right angle N.

Using the Pythagorean theorem, we can find the length of the hypotenuse LN:

[tex]LN^2 = LM^2 + MN^2 \\LN^2 = 10^2 + 6^2\\LN^2 = 100 + 36\\LN^2 = 136LN = sqrt(136) = 2*sqrt(34)[/tex]

Now, we can use the tangent formula:

tan(M) = opposite/adjacent = LM/MN

tan(M) = 10/6 = 5/3

To know more about Pythagorean theorem, here

brainly.com/question/28361847

#SPJ4

We verified that the associative property of addition holds for the given expression below

Let's verify the associative property of addition for the given expression:

2/3 + (3/4 + 1/5) = (2/3 + 3/4) + 1/5

We can simplify both sides of the equation by finding a common denominator for the fractions:

2/3 + (3/4 + 1/5) = (2/3 + 3/4) + 1/5

Multiplying 2/3 by 20/20, we get:

40/60 + (3/4 + 1/5) = (2/3 + 3/4) + 1/5

Multiplying 3/4 by 15/15, we get:

40/60 + 45/60 + 1/5 = (2/3 + 3/4) + 1/5

Combining the first two terms on the left-hand side, we get:

85/60 + 1/5 = (2/3 + 3/4) + 1/5

Simplifying the fraction 85/60, we get:

17/12 + 1/5 = (2/3 + 3/4) + 1/5

Multiplying 2/3 by 4/4, we get:

17/12 + 1/5 = (8/12 + 9/12) + 1/5

Combining the fractions in the parentheses, we get:

17/12 + 1/5 = 17/12 + 1/5

Since both sides of the equation are equal, we have verified that the associative property of addition holds for the given expression:

2/3 + (3/4 + 1/5) = (2/3 + 3/4) + 1/5.

Read more about epression at

https://brainly.com/question/15775046

#SPJ1

This equation tells us that the distance the bus travels is directly proportional to the time it travels at a constant speed of 15m/s.

What is speed?

Speed is the method of measuring how quickly an object moves from one place to another. It is a scalar quantity that expresses the rate of change of distance over time. In other words, it is the distance traveled per unit of time.

If the bus is traveling at a constant speed of 15m/s, then its acceleration is 0m/s². Therefore, we can use the formula for distance traveled at constant speed:

distance = speed × time

In this case, the speed of the bus is 15m/s, so the equation for the distance the bus travels in time (t) is:

distance = 15t

This equation tells us that the distance the bus travels is directly proportional to the time it travels at a constant speed of 15m/s.

To learn more about speedvisit the link:

https://brainly.com/question/13943409

#SPJ1

As  portion of the vegetables weights 1/4 pound and totals **15/16 pounds , the can has **3 and 3/4 servings** of veggies.

A pound is a unit of weight or mass measurement. The Latin word "libra," which means "weight" or "balance," denotes a measurement system employed in ancient Rome and which is equivalent to around 12 ounces.

Mass is the quantity of matter in a thing, whereas weight is the force of gravity acting on the object

Each portion of the vegetables weights 1/4 pound and totals **15/16 pounds** in the can. We must divide the can's overall weight by the weight of one serving to determine how many servings of veggies are included therein.

We thus have:

'''The can weighs 15/16 pounds in total.

Weight of one serving is one-fourth of a pound.

We divide the entire weight of the can by the weight of one serving to get how many servings are in it:

``` (15/16) ÷ (1/4) = (15/16) × (4/1)

= 60/16 = 3 3/4 ```

As a result, the can has **3 and 3/4 servings** of veggies.

To know more about weight and pounds visit:

brainly.com/question/28764202

#SPJ1

Therefore, the mean weight for each group in the three randomizations are:

First Randomization:

Group A: 12.5

Group B: 11.46

Second Randomization:

Group A: 11.56

Group B: 12.4

Third Randomization:

Group A: 12.18

Group B: 12.18

The mean, also known as the average, is a measure of central tendency in statistics. It is found by adding up all the values in a data set and dividing by the number of values in the set. The mean is sensitive to extreme values, or outliers, in the data set, and can be influenced by them. It is one of the most commonly used measures of central tendency, along with the median and mode.

Here,

First Randomization:

Group A: (13.6 + 12.1 + 15.9 + 11.2 + 9.7) / 5 = 12.5

Group B: (9.2 + 8.2 + 11.5 + 13.8 + 14.6) / 5 = 11.46

Second Randomization:

Group A: (8.2 + 13.8 + 15.9 + 9.2 + 9.7) / 5 = 11.56

Group B: (12.1 + 14.6 + 13.6 + 11.2 + 11.5) / 5 = 12.4

Third Randomization:

Group A: (8.2 + 9.7 + 11.5 + 14.6 + 15.9) / 5 = 12.18

Group B: (12.1 + 13.8 + 13.6 + 11.2 + 9.2) / 5 = 12.18

To know more about mean,

https://brainly.com/question/14724376

#SPJ1

Answer:

LOOK BELOW FOR ANSWER !!

Step-by-step explanation:

After the first randomization,

A  is  12.5

B  is 11.46

and A-B  is 1.04

After the second randomization,

A is 11.36

B is 12.6

A and B is -1.24

After the third randomization,

A is 11.98

B is 11.98

A and B is 1

.

This indicates that the sample size was large enough to construct a reasonably precise confidence interval.

Since n is at least 30" or "yes, since np and nq are both at least 15."

The sample size, we cannot definitively choose between these two options.

Information provided; the sample size is not explicitly stated.

Determine whether the sample size is considered large enough for the construction of a confidence interval based on the conditions for using a normal approximation to the binomial distribution.
One condition is that np and nq are both at least 15, where n is the sample size, p is the proportion of interest (in this case, the proportion of central Florida reefers who use LED lighting), and q is the complement of p (i.e., 1-p). This condition ensures that the distribution of the sample proportion is approximately normal.
Another condition is that the sample size is large enough that the standard error of the sample proportion (sqrt[pq/n]) is small enough to use a normal approximation.

This condition is not explicitly stated, but it is typically considered to be met when n is at least 30.
Since we do not know the sample size, we cannot directly determine whether the conditions are met.

That a 95% confidence interval was constructed with an interval estimate of (.755, .816) and a sample proportion of .7855.

For similar questions on sample size

https://brainly.com/question/28583871

#SPJ11

The surface area of the composite solid is 162 unit²

The area occupied by a three-dimensional object by its outer surface is called the surface area.

The composite solid has 6 faces . The area of each face is calculated as follows;

Face 1

area = 5×7 = 35 units²

face 2

area = 1/2bh + l×b

= 1/2 ×3×4 + 3×4

= 6+12 = 18units²

face 3 = face 2

area = 18units²

face 4

area = 3× 7 = 21units²

face 5

area = 4×7

= 28units²

face 6

area = 3×7 + 3×7

= 21+21 = 42units²

Therefore total surface area = 42+28+21+18+18+35

= 162 units²

learn more about surface area from

https://brainly.com/question/26403859

#SPJ1

Rounding to the nearest tenth, the circumference of the circle is 69.1 cm.

Diameter is a term used to describe the measurement of a straight line passing through the center of a circle or sphere and connecting two points on its circumference. It is the longest chord that can be drawn in a circle, passing through the center and splitting the circle into two equal halves.

In other words, the diameter is the distance across the circle or sphere, passing through its center, and it is twice the length of the radius. The diameter is a fundamental measurement in geometry and is used to determine other important properties of circles and spheres such as their circumference, area, volume, and surface area.

Diameter is commonly denoted by the symbol "d" and can be calculated using the formula:

d = 2r

where "r" is the radius of the circle or sphere. The diameter can also be found using the Pythagorean theorem, where the diameter is the hypotenuse of a right triangle with sides equal to the radius.

Understanding the concept of diameter is important in many fields, including mathematics, engineering, and science, and is useful for solving problems related to circular and spherical objects.

The formula for the circumference of a circle is C = πd, where d is the diameter.

Given that the diameter is 22 cm, we can plug this into the formula:

C = πd

C = 3.14 × 22

C = 69.08

Rounding to the nearest tenth, the circumference of the circle is 69.1 cm.

To know more about circumference visit:

https://brainly.com/question/16931510

#SPJ1

Answer:

22√5

Step-by-step explanation:

√20=√4x5 = √4 x √5 = 2√5

√45 = √9 x 5 = √9 x √5 = 3√5

√80 = √16 x 5 = √16 x √5 = 4√5

4√20 = 6 √45 - √80 = 4(2√5) + 6(3√5)- 4√5

8√5 + 18√5 - 4√5 = 22√5

So its 22√5

Answer:

[tex]22 \sqrt{5} [/tex]

Step-by-step explanation:

the explaination is avaliable in the picture i sent you

and please give me branliest

The equation of the function on the graph is y = ∛(x-3).

The graph is a cubic function shifted 3 units right

The function y = ∛(x-3) represents the cube root function shifted 3 units to the right.

So, the equation of the function is y = ∛(x-3).

The domain of the function is all real numbers since we can take the cube root of any real number.

The range of the function is also all real numbers because for any real number x, there is a real number y such that y = ∛(x-3).

Also, the function is defined for all values since taking the cube root of any number is a real number.

Read more about transformation at

https://brainly.com/question/1548871

#SPJ1

The area of the trapezoid is 72 square meters.

In order to find the area of a trapezoid, we need to use the formula:

Area = (b1 + b2) x h / 2

where b1 and b2 are the lengths of the parallel sides, and h is the height of the trapezoid.

In this case, we are given the lengths of the parallel sides as 6m and 12m respectively, and the height of the trapezoid is 4m.

So, we can plug these values into the formula to get:

Area = (6m + 12m) x 4m / 2

Area = 18m x 4m Area = 72m²

To know more about trapezoid here

https://brainly.com/question/8643562

#SPJ4

Complete Question:

Find the area of the trapezoid.

Base 1 = 6 m

Height = 4 m

Base 2 = 12 m

The differential of the function Z is -4e⁻⁴ˣcos(4πt) - 4πsin(4πt)e⁻⁴ˣ

To find the differential function of Z = e⁻⁴ˣ cos(4πt), we will use the product rule of differentiation. The product rule states that the derivative of the product of two functions is equal to the first function multiplied by the derivative of the second function plus the second function multiplied by the derivative of the first function.

Let's apply the product rule to our function Z:

First, we differentiate the first function e⁻⁴ˣ with respect to x. The derivative of e⁻⁴ˣ is -4e⁻⁴ˣ.

Next, we differentiate the second function cos(4πt) with respect to t. The derivative of cos(4πt) is -4πsin(4πt).

Therefore, the differential function of Z is:

dZ/dt = -4e⁻⁴ˣcos(4πt) - 4πsin(4πt)e⁻⁴ˣ

To know more about differential function here

https://brainly.com/question/30074964

#SPJ4

One measure we use to determine the F-statistics is the ratio of the variability within and across groups when we are doing the one way-ANOVA test.

We are interested in discovering whether there are significant differences between the means of the populations when doing a one-way ANOVA test on more than two independent normally distributed populations. A test statistic used to reach this conclusion is the F-statistic.

The ratio of the variability of the between group and within group is the a tool that we use to find the F-statistics.

F is equal to (SSB/k-1) / (SSW/N-k)

To know more about f-statistic, visit,

https://brainly.com/question/29104227

#SPJ4

If a hypothesis test is performed and fails to reject the null hypothesis, it would mean that there is not enough evidence to support the claim that less than 15% of the marketing organization's employees are paid minimum wage.

Therefore, it would not be concluded that the claim is true. The null hypothesis assumes that the claim is false or that the percentage of employees paid minimum wage is not significantly different from 15%.

The failure to reject the null hypothesis means that the evidence does not contradict the null hypothesis, but it does not necessarily prove it to be true.

Learn more about hypothesis:

https://brainly.com/question/10854125

#SPJ11

The results of the experiment might support the hypothesis, or might not.

The correct statement is that the results of the experiment might support the hypothesis, or might not. It is important to design a well-controlled experiment that tests the hypothesis in a rigorous and systematic way. The goal is not to prove the hypothesis correct, but rather to gather evidence that either supports or contradicts the hypothesis. It is also important to conduct the experiment in a suitable environment with appropriate equipment and procedures to ensure accurate and reliable results.
Your question focuses on understanding the relationship between a hypothesis, an experiment, and the possible outcomes.
An experiment is designed to test a hypothesis, which is an educated guess or prediction about a phenomenon. When conducting an experiment, the results might either support the hypothesis or contradict it, leading to further investigation and refinement of the hypothesis. A well-designed experiment should be able to provide valuable data and insights, regardless of the outcome.

Learn more about hypothesis here:

https://brainly.com/question/31319397

#SPJ11

The statement that is true is:

"The results of the experiment might support the hypothesis or might not."

A scientist designs an experiment to test a hypothesis.

In such a scenario, it is important to note that the outcome of the experiment cannot be predicted with certainty.

The scientific method involves formulating a hypothesis, designing an experiment to test the hypothesis,

collecting and analyzing data and drawing conclusions.

The hypothesis is an educated guess that can be tested through experimentation.

It is important to remember that a hypothesis can never be proven to be 100% correct, only supported or refuted by the evidence obtained through experimentation.
It is not accurate to say that if the experimenter does the test correctly, the hypothesis will be proven correct.

This is because there are many variables that can affect the outcome of the experiment, and it is impossible to control all of them.

Additionally, a good experiment is not necessarily one that produces the most data.

A good experiment is one that is well-designed, carefully controlled, and yields reliable results.

The use of lab equipment is also not a requirement for conducting experiments.

While it is often necessary for certain types of experiments, many experiments can be conducted with simple materials and equipment.
Ultimately, the results of the experiment might support the hypothesis, or might not. If the results support the hypothesis, it can be considered a step towards validating the hypothesis.

The results do not support the hypothesis, it does not necessarily mean that the hypothesis is incorrect.

It could mean that the experiment was flawed, or that the hypothesis needs to be revised based on the new information obtained from the experiment.
Designing and conducting experiments is an important part of the scientific method.

Guarantee that an experiment will yield the desired results, a well-designed and carefully controlled experiment can provide valuable information that can help scientists understand the natural world.

For similar questions on Hypothesis

https://brainly.com/question/606806

#SPJ11

If X has the hypergeometric distribution, the minimum value that X can take is option (e) 0

The hypergeometric distribution models the probability of getting a certain number of successes in a fixed-size sample drawn without replacement from a finite population containing a known number of successes and failures.

The minimum value that X can take depends on the specific parameters of the distribution.

If the population size is N, the number of successes in the population is K, and the sample size is n, then the minimum value that X can take is max(0, n - (N - K)).

This is because the sample can contain at most n items, and if all of them are failures (i.e., none of them are successes), then X would be 0. On the other hand, if there are fewer than n failures in the population, then the sample can contain at most n - (N - K) successes. If n - (N - K) is negative, then there are more successes than failures in the population, and X can take any value between 0 and n, inclusive.

Therefore, the correct option is (e) 0

Learn more about hypergeometric distribution here

brainly.com/question/30911049

#SPJ4

Answer: True

Step-by-step explanation:

trust

Answer:

I believe they are true

Step-by-step explanation: