7. Aluminum, iron, copper, and oxygen are all examples of which of the following?​

Answer:

d.the gases x and y are elements ​

Explanation:

Since it is impossible to further break down the gases produced during this electrolytic process, we can conclude that the gases x and y are elements.

An element is a distinct substance that cannot be split up into simpler substances. Such substances are made up of only one kind of atom.

It is impossible through chemical reactions split an element into simpler units.

Answer:

B

Explanation:

Answer:

B. Always add the acid to the water slowly, taking a moment to stir between drops

Answer:

Explanation:

sorry dont understand

Answer: D. The speed of rotation of the Earth on its axis

Explanation: How fast Earth spins determines the number of hours in a given day.

Answer:

Lithium

Explanation:

The element with electronic configuration of 2, 1 is helium.

In the electronic configuration, we are able to know that the total number of electrons the atom contains is 3. Also, the element has one electron in the outer most shell.

Elements with one valence electrons are the alkali metals.

Therefore, this configuration clearly matches Lithium.

Answer: the molar mass will be too high

Explanation:

Answer:

At the Earth's surface, wind blows horizontally from high pressure to low pressure areas. The speed is determined by the rate of air pressure change, or gradient, between the two pressure areas. The greater the pressure difference, the faster the winds.

- sciencing

The Four Forces That Influence Wind Speed & Wind Direction

Explanation:

Answer:

6.72 g

Explanation:

Given data:

Mass of calcium chlorate = 13.8 g

Mass of oxygen produced = ?

Solution:

Chemical equation:

Ca(ClO₃)₂        →      CaCl₂ + 3O₂

Number of moles of calcium chlorate:

Number of moles = mass / molar mass

Number of moles = 13.8 g/ 206.98 g/mol

Number of moles = 0.07 mol

Now we will compare the moles of oxygen and  calcium chlorate.

                 Ca(ClO₃)₂         :            O₂

                      1                   :              3

                    0.07               :            3×0.07=0.21 mol

Mass of oxygen:

Mass = number of moles × molar mass

Mass = 0.21 mol × 32 g/mol

Mass = 6.72 g

I think it's D

Hope that helps

Answer: B, the bonding in the compound is nonpolar covalent.

Explanation:

This is because with the same electronegativity, there is an equal sharing of electrons, which indicates that the bonding must be nonpolar.

Answer:

Viscosity

Explanation:

The viscosity of the liquid is the independent variable. The flow rate is the dependent variable in this hypothesis.

The statement given is called the hypothesis. It is a form of scientific guess into a phenomenon.

Answer:

copper

Explanation:

Answer:

metal

Explanation:

Answer:

add a major conductor

Explanation:

Answer:

5 moles of oxygen occupy 120 dm³ volume.

Explanation:

Given data:

Number of moles = 5 mol

Volume of gas = ?

Solution:

In question it is given gas is at room temperature and pressure.

One mole of any gas at room room temperature and pressure occupy volume of 24 dm³. Thus,

5 mole of gas occupy volume of,

5 mol × 24 dm³/1 mol

120 dm³

5 moles of oxygen occupy 120 dm³ volume.

Answer:

In Chemistry, proteins are defined as biomolecules that are essential for the human body to maintain homeostasis. In a PCR test, short for Polymerase Chain Reaction test, scientists are tracking for a certain chemical substance in our body that may be present in the process of protein synthesis or DNA replication that could possibly show if a person is positive for the Corona Virus.Therefor, the relation between Chemistry and the PCR test is that, without Chemistry, the PCR test would not be able to stand on its own, which in other words means the PCR test is dependent upon the presence of Chemistry.

1 A

2 C

3 G

4 D

5 E

6 A and G

7 D and E  

8 F

9 B

10 C

11 if it is in motion and how much motion it has

12 a bow being pulled back shows potential and dropping a ball can chow kinetic

IM SO SRRY  don't feel bad

Answer:

I’m sad

Explanation:

Answer: True

Explanation:

Answer:

Explanation:

The mass of a substance when given the density and volume can be found by using the formula

mass = Density × volume

From the question we have

mass = 0.917 × 2.5 = 2.2925

We have the final answer as

Hope this helps you

Answer:. 2.3 g

Explanation:

jcp-fnoa-kzk join here

Answer:

answer is D

Explanation:

Answer:

hail, btw have a nice day

Answer:

Hail

Explanation:

I got it right on my test

Answer:

So yes it True.

Explanation:

A seismometer is the internal part of the seismograph, which may be a pendulum or a mass mounted on a spring; however, it is often used synonymously with "seismograph".

Seismographs are instruments used to record the motion of the ground during an earthquake. They are installed in the ground throughout the world and operated as part of a seismographic network. The earliest "seismoscope" was invented by the Chinese philosopher Chang Heng in A.D. 132. This did not, however, record earthquakes; it only indicated that an earthquake was occurring. The first seismograph was developed in 1890.

A seismograph is securely mounted onto the surface of the earth so that when the earth shakes, the entire unit shakes with it EXCEPT for the mass on the spring, which has inertia and remains in the same place. As the seismograph shakes under the mass, the recording device on the mass records the relative motion between itself and the rest of the instrument, thus recording the ground motion. In reality, these mechanisms are no longer manual, but instead work by measuring electronic changes produced by the motion of the ground with respect to the mass.

A seismogram is the recording of the ground shaking at the specific location of the instrument. On a seismogram, the HORIZONTAL axis = time (measured in seconds) and the VERTICAL axis= ground displacement (usually measured in millimeters). When there is NO EARTHQUAKE reading, there is just a straight line except for small wiggles caused by local disturbance or "noise" and the time markers. Seismograms are digital now - there are no more paper recordings.

I hope this helps:3

A seismograph is placed on the surface of the ground to detect any vibration. Therefore, the given statement is correct.

A seismometer can be described as an instrument that responds to ground noises and shaking such as earthquakes, volcanic eruptions, and explosions. Seismometers are generally attached with a timing device and a recording device to create a seismograph.

The output of such a device is recorded on paper or film, now recorded and processed digitally known as a seismogram. This data is used to locate and characterize earthquakes, and to study the internal structure of the earth.

A seismoscope is used to trigger the device to start recording, and then a recording surface would form a graphical illustration of the tremors automatically.

A seismometer feels the up-down motions of the Earth that move along with any motion detected. The relative motion between the weight and the frame offers a measurement of the vertical ground motion.

Learn more about seismograph, here:

https://brainly.com/question/1828024

#SPJ5

The chemical formula for an ionic compound represents the simplest ratio of ions that results in an electrically neutral compound. That is option D.

An ionic chemical compound is defined as the type of chemical compound that contains both the oppositely-charged ions of a metal and a nonmetal are attracted reacting with each other to form an ionic bond.

When represented as a chemical formula, it is the simplest ratio of ions that results in an electrically neutral compound.

Learn more about ionic compound here:

https://brainly.com/question/28851190

#SPJ6

Answer:

67.6 years is the time the isotope take to decay from 0.900g to 0.170g

Explanation:

The radioactive decay follows first order law:

Ln [A] = -kt + ln[A]₀

Where [A] is concentration after time t,

k is decay constant:

k = ln 2 / t(1/2)

k = ln2 / 28.1 years

k = 0.02467 years⁻¹

[A]₀ = Initial concentration.

We can replace concentration and use the mass of the isotope:

Ln [A] = -kt + ln[A]₀

Ln [0.170g] = -0.02467 years⁻¹t + ln[0.900g]

-1.667 = -0.02467 years⁻¹t

t =

The time required for the sample to reduce to 0.170 grams has been 67.75 years.

Half-life can be defined as the times required by the substance to reduce to half of its initial concentration.

The half-life can be expressed as:

Amount left = Initial amount [tex]\times[/tex] [tex]\rm \dfrac{1}{2}^\dfrac{time}{Half-life}[/tex]

From the given:

0.17 g = 0.9 [tex]\rm \times\;\dfrac{1}{2}^\dfrac{t}{28.1}[/tex]

[tex]\rm \dfrac{0.17}{0.9}[/tex] = [tex]\rm \dfrac{1}{2}^\dfrac{t}{28.1}[/tex]

0.188 = [tex]\rm (0.5)^\dfrac{t}{28.1}[/tex]

Taking log on both the sides,

log 0.188 = [tex]\rm \dfrac{t}{28.1}\;\times[/tex] log 0.5

2.411 = [tex]\rm\dfrac{t}{28.1}[/tex]

t = 2.411 [tex]\times[/tex] 28.1 years

Time = 67.75 years.

The time required for the sample to reduce to 0.170 grams has been 67.75 years.

For more information about half-life, refer to the link:

https://brainly.com/question/24710827

Answer:

It would be the first one, an overall positive charge on one end and overall negative charge on the other end.

Explanation:

Answer:

It's A.) A molecule that has an overall positive change in one end and an overall negative charge on the other

Explanation:

The definition of a polar molecule is a molecule with a negatively charged end and a positively charged end.

Answer: Inertia

Explanation:

Answer:

A

Explanation:

A: because for something to have kinetic energy it has to be in motion, the other 2 scenarios are not moving.