a 0.350 kg of ice is initially at temperature of -14 c. how much heat is required to melt one quarter mass of the ice only

If the acceleration of the rock is around 10 m/s2 downwards, then the distance fallen by the rock during a 1 second time interval is largest during the first second of falling.

The acceleration of the rock is around 10 m/s2 downwards, which means that the speed of the rock increases by 10 m/s every second. Therefore, the distance fallen by the rock during a 1-second time interval is largest during the first second of falling.

This is because during the first second, the rock starts from rest and accelerates to a speed of 10 m/s, covering a distance of 5 meters. The distance fallen by the rock during the second second will be larger than during the first second, but the increase in distance will be less than the increase during the first second, as the rock has already gained some speed.

Therefore, the distance fallen by the rock is not always the same throughout the fall, and it is largest during the first second of falling.

For more such questions on acceleration, click on:

https://brainly.com/question/460763

#SPJ11

The radius of Procyon B is approximately 0.0121 solar radii.

To find the radius of Procyon B, we need to first determine its luminosity. We can use the formula for radiation flux, F = L / (4 * π * d²), where F is the radiation flux, L is the luminosity, and d is the distance (11.4 light years in this case).

We can then convert the distance to meters using the conversion factor 1 light year = 9.461 x 10¹⁵ meters.

After finding the luminosity, we can use the Stefan-Boltzmann Law, L = 4 * π * R^2 * σ * T⁴, where R is the radius, σ is the Stefan-Boltzmann constant (5.67 x 10⁻⁸ W/m²K⁴), and T is the effective temperature of the white dwarf star. Solving for R, we find that the radius of Procyon B is approximately 0.0121 solar radii.

To know more about Stefan-Boltzmann Law click on below link:

https://brainly.com/question/30763196#

#SPJ11

To find the focal length of the converging lens, we'll use the lens formula and magnification formula.

1. Lens formula: 1/f = 1/u + 1/v, where f is the focal length, u is the object distance, and v is the image distance.

2. Magnification formula: M = -(v/u) = h'/h, where M is the magnification, h' is the image height, and h is the object height.

Given information: h = 6.44 mm u = 27.7 cm = 277 mm (converted to mm) h' = -3.38 mm (negative because it's an inverted image)

Step 1: Calculate the magnification (M) using the magnification formula. M = h'/h = -3.38 / 6.44 = -0.525

Step 2: Calculate the image distance (v) using the magnification formula. v = -u * M = -277 * (-0.525) = 145.425 mm

Step 3: Find the focal length (f) using the lens formula. 1/f = 1/u + 1/v 1/f = 1/277 + 1/145.425 1/f ≈ 0.00361 + 0.00688 1/f ≈ 0.01049

Now, find f by taking the reciprocal of the sum: f ≈ 1 / 0.01049 ≈ 95.3 mm

Finally, convert the focal length to cm: f ≈ 95.3 mm / 10 = 9.53 cm So, the focal length of the lens is approximately 9.53 cm.

Learn more about magnification formula here:

https://brainly.com/question/3480304

#SPJ11

The parallel component of the force is found by multiplying the force by the cosine of the angle, which is 120.0 N * cos(30.0°) = 104 N. The perpendicular component is found by multiplying the force by the sine of the angle, which is 120.0 N * sin(30.0°) = 60 N. Therefore, the answer is C. 104 N, 60 N.

To find the parallel and perpendicular components of the force with respect to the ground, we'll use trigonometry. Let F be the total force, θ be the angle, F_parallel be the parallel component, and F_perpendicular be the perpendicular component.

F_parallel = F × cos(θ) = 120 N × cos(30°) = 120 N × 0.866 = 104 N
F_perpendicular = F × sin(θ) = 120 N × sin(30°) = 120 N × 0.5 = 60 N

So, the parallel component is 104 N, and the perpendicular component is 60 N.

The correct answer is C. 104 N, 60 N.

To know more about parallel component click here:

https://brainly.com/question/30173153

#SPJ11

The work done in lifting an object is calculated by the formula W = F x d x cos(theta), where W is the work done, F is the force applied, d is the distance  The correct answer is (c) The 25 kg sack requires more work.

Vertical distance is the straight-line distance between two points in a vertical direction, or perpendicular to the ground or horizon. It is a measure of the height or depth of an object or location, and is typically measured in units such as meters or feet.

For example, if you climb to the top of a 10-meter tall building, the vertical distance you have traveled is 10 meters. Similarly, if you descend into a 100-meter deep mine shaft, the vertical distance you have traveled is 100 meters.

To know more about Vertical distance visit :

https://brainly.com/question/13443630

#SPJ11

The equation that describes the motion of the 0.580-kg object attached to the spring as it vibrates in simple harmonic motion with an amplitude of 11.0 cm is x(t) = 0.11 * cos(4.19t).

A 0.580-kg object attached to a spring with a force constant of 8.00 N/m vibrates in simple harmonic motion with an amplitude of 11.0 cm. Simple harmonic motion is a type of periodic motion where the restoring force is proportional to the displacement from the equilibrium position.

Calculate the angular frequency (ω)
ω = √(k/m)
where k is the spring constant (8.00 N/m) and m is the mass of the object (0.580 kg).

ω = √(8.00/0.580)
ω ≈ 4.19 rad/s

Express the position (x) as a function of time (t)
x(t) = A * cos(ωt)
where A is the amplitude (0.11 m, converted from 11.0 cm), ω is the angular frequency, and t is the time.

Assuming the position of the object is at the origin (x=0) at t=0, we have:

x(t) = 0.11 * cos(4.19t)

This equation describes the motion of the 0.580-kg object attached to the spring as it vibrates in simple harmonic motion with an amplitude of 11.0 cm.

Learn more about "object": https://brainly.com/question/25959744

#SPJ11

The direction of the vertical component of the total angular momentum of a system can depend on a variety of factors, such as the orientation and movement of individual objects within the system.

The direction of the vertical component of the total angular momentum of a system initially depends on the specific conditions of the system, such as the orientation and motion of its components. It is impossible to tell without additional information about the system and its components. Without more information about the system, it is impossible to tell which direction the vertical component points.

To learn more about orientation visit;

https://brainly.com/question/12049504

#SPJ11

Nucleation and growth processes can be controlled to tailor the microstructure of a material to meet specific performance requirements.

Nucleation and growth are important processes in the control of microstructure in materials science.

Nucleation refers to the initial formation of a new phase, while growth refers to the increase in size and volume of that phase. These processes can be controlled to tailor the microstructure of a material to meet specific performance requirements.

In general, nucleation and growth can be controlled by manipulating factors such as temperature, pressure, and chemical composition. For example, in the production of metals, the rate of cooling can be controlled to control nucleation and growth.

Rapid cooling will result in small nucleation sites and slow growth, leading to a fine-grained microstructure. Slower cooling rates result in larger nucleation sites and faster growth, leading to a coarser-grained microstructure.

To learn more about nucleation, click here:

https://brainly.com/question/31555798

#SPJ11

1.2 Ã 10-2 J work is required to move a -4.0 mC charge from the negative plate to the positive plate of this system. Therefore the correct option is option A.

The labour necessary to transfer a charge from one capacitor plate to the other is calculated as follows:

W = qV

where V represents the potential difference between the plates and q represents the charge.

The charge is -4.0 mC in this instance, and the plates' respective potential differences are:

80 V is equal to V = Ed = (2.0 x 104 N/C)(4.0 x 10-3 m).

where d is the distance between the plates and E is the strength of the electric field.

As a result, the necessary task is:

W = (-4.0 x 10^-3 C)(80 V) = -0.32 J

A) -1.2 10-2 J (rounded to two significant numbers) is the response.

For such more question on charge:

https://brainly.com/question/14306160

#SPJ11

The spring constant of the spring is 400 N/m.

Displacement of the spring, x = 3.5 cm

Load applied, F = 14 N

We know that, restoring force on a spring,

F = kx

Therefore, spring constant of the spring,

k = F/x

k = 14/(3.5 x 10⁻²)

k = 400 N/m

To learn more about spring constant, click:

https://brainly.com/question/14159361

#SPJ1

If the mass balance of global water was rising in the oceans and falling on land, it would likely indicate that two processes in the water cycle are out of balance precipitation and evaporation.

Precipitation is the process by which water vapor in the atmosphere condenses and falls to the Earth's surface as rain, snow, or other forms of precipitation.

If precipitation is decreasing and less water is falling on land, then less water will be available for surface runoff and groundwater recharge.

This could lead to droughts, lower water levels in rivers and lakes, and a decrease in the availability of freshwater resources.

Evaporation is the process by which water on the Earth's surface and in plants and animals changes from a liquid to a gas and enters the atmosphere.

If evaporation is increasing, more water vapor will be available in the atmosphere for precipitation.

However, if precipitation is decreasing, then more water will be evaporated than is being returned to the land through precipitation.

This could lead to an imbalance in the water cycle, with more water being lost to the atmosphere than is being replenished by precipitation.

Together, a decrease in precipitation and an increase in evaporation could lead to a net loss of water from the land, which would contribute to rising sea levels and an increase in the mass balance of global water in the oceans.

It is important to maintain a balance in the water cycle to ensure that there is enough freshwater available for human and ecosystem needs.

to know more about water cycle refer here:

https://brainly.com/question/1151425#

#SPJ11

To determine the x component of the force on a charge (q) located at (x), we need to take the derivative of the electric potential with respect to x. This gives us the electric field, E(x) = -dV/dx.

Once we have the electric field, we can use the equation F = qE to find the force on the charge. The x component of the force is then given by Fx = qEx.

So, to summarize:

- Electric potential: V(x) = NUMBER 1 - NUMBER 2
- Electric field: E(x) = -dV/dx
- Force: F = qE
- X component of force: Fx = qEx

Therefore, to find the x component of the force on the charge (q) located at (x), we need to first find the electric field by taking the derivative of the electric potential with respect to x.

To know more about electric field visit :-

https://brainly.com/question/26978411

#SPJ11

Yes, it is possible for a converging lens (in air) to behave as a diverging lens when surrounded by another medium.

A converging lens typically bends light rays inward, causing them to converge at a single point, called the focal point. However, the behavior of the lens can change when it is placed in a different medium, due to the change in the refractive index. The refractive index is the ratio of the speed of light in a vacuum to the speed of light in a given medium.

When a converging lens is placed in a medium with a higher refractive index than the lens material itself, the lens will behave as a diverging lens. This is because the light rays will bend away from the normal when they enter and exit the lens, causing them to spread out instead of converging.

In summary, a converging lens can behave as a diverging lens when surrounded by a medium with a higher refractive index than the lens material.

To know more about refractive index:

https://brainly.com/question/30761100

#SPJ11

The velocity of the rock after 2 seconds on Mars is -19.44 m/s. To find this, differentiate the height equation H(t) = 16t - 1.86t² and evaluate it at t = 2.

1. Differentiate the height equation: H'(t) = d(16t - 1.86t²)/dt = 16 - 3.72t

2. Evaluate the derivative at t = 2: H'(2) = 16 - 3.72(2) = -19.44 m/s

3. (a) Velocity at 2 seconds: -19.44 m/s

4. (b) Velocity at t = a: H'(a) = 16 - 3.72a

5. (c) Find the time when H(t) = 0: 16t - 1.86t² = 0. Solve for t (round to one decimal place)

6. (d) Find the velocity when the rock hits the surface: evaluate H'(t) at the time found in step 5.

To know more about derivative click on below link:

https://brainly.com/question/25324584#

#SPJ11

To calculate the Heating Degree Days (HDD) for the month of January in State College, PA, with an average outside temperature of 28°F :

We have the given temperature outside that is 28 degrees Fahrenheit. We need to calculate the HDD for that day.HDD stands for Heating Degree Day. It is a measure of how much heat is required to maintain the temperature of a building at 65 degrees Fahrenheit when the outside temperature is lower than 65 degrees Fahrenheit. If the outside temperature is greater than or equal to 65 degrees Fahrenheit, then the HDD is zero.

1. Determine the base temperature: The base temperature for calculating HDD is typically 65°F.

2. Subtract the average outside temperature from the base temperature: 65°F - 28°F = 37°F.

3. Multiply the difference by the number of days in the month: January has 31 days, so 37°F x 31 days = 1,147 HDD.

In State College, PA, the HDD for the month of January with an average outside temperature of 28°F is 1,147.

To know more about Heating Degree Days :

https://brainly.com/question/19711797

#SPJ11

The SMC and LMC are two dwarf galaxies that orbit around our Milky Way galaxy. These galaxies are quite small compared to the Milky Way and are classified as irregular galaxies due to their amorphous shape. It is believed that these galaxies have been distorted due to gravitational interactions with the Milky Way and with each other.

It is also believed that the SMC and LMC may have lost their shape millions of years ago when they passed through each other. This interaction would have caused gravitational forces to distort the galaxies' shapes and may have triggered bursts of star formation. In fact, the SMC and LMC are still in the process of interacting with each other, and scientists believe that they will eventually merge to form a single larger galaxy.

The gravitational interactions between galaxies can have a significant impact on their shapes and structures. As galaxies move through space, they can be pulled and stretched by the gravitational forces of nearby galaxies, causing them to warp and distort. This process can also trigger the formation of new stars and can lead to the eventual merging of galaxies.

In conclusion, the SMC and LMC have likely lost their shapes due to gravitational interactions with the Milky Way and with each other. These interactions can cause significant distortions in galaxies' shapes and can trigger bursts of star formation. However, these interactions are also a natural part of galaxy evolution and can ultimately lead to the formation of larger and more complex galaxies.

For more such questions on Milky Way galaxy.

https://brainly.com/question/30714548#

#SPJ11

The correct statement describing the observed characteristics of gamma-ray bursts is that they are brief, very intense, nonrepeating, sudden releases of energy that appear to come from very large distances outside our galaxy.

GRBs are among the most energetic and luminous events that occur in the universe, and they are associated with the deaths of massive stars. GRBs are usually accompanied by sudden releases of X-ray energy from the buildup of hydrogen around neutron stars near the central regions of our galaxy and the centers of some globular star clusters. GRBs are thought to be caused by the core collapse of a massive star at least eight times heavier than our Sun when it exhausts the processes that release energy by nuclear fusion in its core.

To learn more about gamma-rays click here https://brainly.com/question/23281551

#SPJ11

If the string breaks, the magnitude of the acceleration of the block as it slides down the inclined plane is g * sin(theta). Correct answer choice D) g sin.

To determine the magnitude of the acceleration of the block as it slides down the inclined plane after the string breaks: Identify the forces acting on the block: gravity (F_gravity) and the normal force (F_normal) from the inclined plane. Resolve the gravitational force into two components: one parallel to the inclined plane (F_parallel) and one perpendicular to the inclined plane (F_perpendicular). Determine the net force acting on the block along the inclined plane (F_net). Use Newton's second law (F_net = m*a) to find the acceleration (a) of the block.

The forces acting on the block are gravity (F_gravity = m*g, where m is the mass of the block and g is the acceleration due to gravity) and the normal force (F_normal) from the inclined plane. We can resolve F_gravity into two components:
- F_parallel = F_gravity * sin(theta) = m * g * sin(theta)
- F_perpendicular = F_gravity * cos(theta) = m * g * cos(theta)

The net force acting on the block along the inclined plane is F_net = F_parallel, since the string is broken and there is no friction mentioned in the problem.

Using Newton's second law, we can determine the acceleration (a) of the block:
F_net = m * a
F_parallel = m * a
m * g * sin(theta) = m * a

Divide both sides by m:
a = g * sin(theta)

So, the magnitude of the acceleration of the block as it slides down the inclined plane is g * sin(theta), which corresponds to answer choice D) g sin.

More on acceleration: https://brainly.com/question/23944424

#SPJ11

The presence of metals in gas and dust from a previous generation of stars.

Since the gas and dust contained metals from the previous generation of stars, these materials played a crucial role in the formation of new celestial bodies. When a star reaches the end of its life, it goes through a process called nucleosynthesis, during which heavier elements like metals are formed. These metals are then expelled into the surrounding interstellar medium through events like supernova explosions.

This enriched gas and dust will eventually form new stars, planets, and other celestial bodies. The presence of metals in these new objects is crucial, as they contribute to the chemical diversity and overall evolution of the universe. In summary, the gas and dust from a previous generation of stars are essential for the formation and composition of new celestial bodies, as they contain important metallic elements.

To know more about nucleosynthesis:

https://brainly.com/question/13517558

#SPJ11

The de Broglie wavelength of the baseball is approximately 1.08 x 10^-34 meters.

To calculate the de Broglie wavelength of a baseball with a mass of 143 g thrown at 97 mph, follow these steps:
1. Convert the mass of the baseball from grams to kilograms: 143 g * (1 kg / 1000 g) = 0.143 kg
2. Convert the speed of the baseball from miles per hour to meters per second: 97 mph * (1609.34 m / 1 mile) * (1 hr / 3600 s) ≈ 43.35 m/s
3. Use the de Broglie wavelength formula: λ = h / (m * v), where λ is the wavelength, h is Planck's constant (6.626 x 10^-34 Js), m is the mass of the baseball, and v is its velocity.
4. Plug in the values: λ = (6.626 x 10^-34 Js) / (0.143 kg * 43.35 m/s)

The de Broglie wavelength of the baseball is approximately 1.08 x 10^-34 meters.

Learn more about "wavelength": https://brainly.com/question/10750459

#SPJ11

The device that detects light in the ultraviolet and infrared spectrums in order to alert occupants to fires is called a Flame Detector.

This device typically uses UV and IR sensors to identify the unique light signatures emitted by flames, allowing it to quickly and accurately detect fires and provide alerts to ensure occupant safety. A flame detector is a sensor created to recognize the presence of a flame or fire and act accordingly, enabling flame detection. Depending on the installation, possible responses to a flame detection include sounding an alarm, turning off a fuel line (such as a propane or a natural gas line), and turning on a fire suppression system.

When employed in industrial furnaces, for example, their purpose is to certify that the furnace is operating properly. They can also be used to turn off the ignition system, however frequently they don't do anything more than alert the operator or control system.

More on flame detector: https://brainly.com/question/13155639

#SPJ11

Shylock being cornered by Portia disguised as a lawyer in the play "The Merchant of Venice." When Shylock is cornered for the second time by Portia disguised as the lawyer, he is instructed to strictly take only one pound of flesh from Antonio.

In this scene, Portia cleverly uses the specific terms of the bond to argue that Shylock can only take the pound of flesh, without shedding any blood or taking more or less than exactly one pound.

This puts Shylock in a difficult position, as it becomes impossible for him to extract the pound of flesh without violating the bond's conditions, ultimately saving Antonio from harm.

To know more about “The Merchant of Venice”:

https://brainly.com/question/14313525

#SPJ11

Safely de-energizing the debarker requires that six electrical sources and one pneumatic energy source need to be disconnected and locked out. This statement is true.

Lock out, tag out (LOTO) is a safety practise used to make sure that dangerous equipment is turned off completely and cannot be started up again until maintenance or repair work has been finished. Before any work is done on the equipment in question, dangerous energy sources must be "isolated and rendered inoperative".

The isolated power sources are then locked, and a tag identifying the worker and the explanation for the LOTO is attached to the lock. The employee then keeps the lock's key, making sure that only they can open the lock and turn on the machine. This stops equipment from accidentally starting up while it's in a dangerous state or when a worker is in close proximity to it.

To know more about de-energizing click here:

https://brainly.com/question/28690022

#SPJ11

When the gas in the outer part of a star has a high opacity, it means that the gas is not very transparent and is inefficient at allowing light and radiation to pass through it. This high opacity can affect the star's energy transport and overall structure in several ways. Here are the steps to explain the consequences of high opacity:

1. High opacity in the outer part of a star inhibits the escape of photons (particles of light) from the star's interior.
2. As a result, the trapped photons increase the pressure inside the star.
3. The increased pressure leads to a higher temperature in the outer layer, causing the gas to expand.
4. This expansion results in the star swelling in size, potentially forming a red giant or supergiant star.
5. The increased size and temperature can also cause the outer layers to become unstable, leading to mass loss and other phenomena such as pulsations or stellar winds.

In summary, when the gas in the outer part of a star has a high opacity, it can lead to increased pressure, temperature, and expansion, potentially causing the star to evolve into a red giant or supergiant, and making it prone to instability.

To know more about consequences of high opacity:

https://brainly.com/question/31438359

#SPJ11

The phase of the bacterial growth curve in which limiting factors intensify, cell begin to die at high rate and curve dips down is called the death phase.

During this phase, the nutrient supply becomes depleted, and waste products accumulate, leading to a decline in bacterial population. This phase is characterized by the rapid loss of bacterial viability and an increase in the rate of cell death.

The death phase is a critical aspect of bacterial growth, as it indicates the limits of the environment's ability to support microbial growth.

Understanding the death phase is essential in the control and prevention of bacterial infections, as it provides insights into how to manipulate the environment to minimize bacterial growth and spread.

Overall, the death phase is a crucial part of the bacterial growth curve and is a critical consideration for microbiologists and public health professionals alike.

To know more about microbiologists click on below link:

https://brainly.com/question/13549869#

#SPJ11

Surface tension is the measurement of cohesive forces between the molecules at the surface of illiquid.

Surface tension is the measurement of cohesive forces between the molecules at the surface of illiquid. This is the property of a liquid that makes its surface to resist external forces  such as air pressure and gravity.

What causes surface tension is the attraction between molecules in a liquid which creates what is called a "skin" on the surface of the liquid which is resisting deformation.  

This property it's very noticeable in tiny droplets which tend to be spherical because of the surface tension of the liquid they are in. The units of measurement for surface tension  is units of force per unit length such as Newton per meter.

Learn about surface tension here https://brainly.com/question/138724

#SPJ1

The magnitude of the external magnetic flux through the wire loop decreases, and there is a clockwise current induced in the loop (as seen from the left). Thus, the correct options are B and B.

Using Lenz's law and the right-hand rule, we can determine the direction of the induced current in the wire loop in different scenarios. When the switch is open, there is no magnetic flux through the wire loop, so there is no induced current.

Immediately after the switch is closed, the magnetic field through the wire loop increases. According to Lenz's law, the induced current will oppose this change. Using the right-hand rule, the induced current direction in the wire loop will be counterclockwise (as seen from the left).

When the switch is reopened, the external magnetic flux through the wire loop decreases (B). Lenz's law predicts that the induced current will oppose this change. Using the right-hand rule, we find that there will be a clockwise induced current in the loop (B) (as seen from the left).

So, the correct responses are B and B.

Learn more about external magnetic flux: https://brainly.com/question/24214683

#SPJ11

The correct answer is A. The frequency of a standing wave formed on a string with fixed boundaries at either end, of harmonic order n, is related to the distance between the boundaries L and the wave speed v by the formula fn = n v/4L where n = 1,3,5...

This formula is derived from the fundamental frequency equation, which states that the frequency of a standing wave is proportional to the wave speed divided by the wavelength. In the case of a standing wave on a string with fixed boundaries at either end, the wavelength is twice the distance between the boundaries. Therefore, the frequency equation becomes fn = n v/2L where n is an odd integer. However, since we are only considering harmonic orders of n = 1,3,5..., we divide by 2 to get the equation fn = n v/4L. This formula is important in understanding the behavior of standing waves on strings and helps to determine the natural frequencies at which the string will vibrate.

learn more about frequency here: brainly.com/question/254161

#SPJ11

I will go through each statement and provide a true or false answer for an electron.
(a) True

(b) False

(c) True

(d) True

(e) True

(a) True. An electron is a quantum particle that exhibits both particle-like and wave-like behaviour, depending on the experiment being conducted.
(b) False. An electron's rest energy is not zero. It has a rest mass, which means it has a non-zero rest energy according to the equation E=[tex]mc^2[/tex].
(c) True. An electron carries energy in its motion, both kinetic energy due to its movement and potential energy due to its position in an electric field.
(d) True. An electron carries momentum in its motion, which can be described as the product of its mass and velocity (p=mv) in classical mechanics, or as the product of its wavelength and Planck's constant divided by 2π in quantum mechanics (p=h/(2πλ)).
(e) True. The motion of an electron is described by a wave function, which has a wavelength and satisfies the Schrödinger wave equation. This wave function provides information about the electron's position and momentum in a probabilistic manner.

To learn more about a quantum particle, refer:-

https://brainly.com/question/2631813

#SPJ11

Determining the potential energy of a particle moving along the x-axis under the influence of a stationary object, given the net force F=(8 N/m³)x³, and potential energy is zero for x=0.

The potential energy U(x) can be found by integrating the negative of the given force with respect to x.

Step 1: Write the expression for the force: F = (8 N/m³)x³.

Step 2: Write the expression for potential energy: U(x) = -∫F dx.

Step 3: Plug in the given force and integrate: U(x) = -∫(8 N/m³)x³ dx.

Step 4: Perform the integration: U(x) = -2(8 N/m³)x⁴/4 + C = -(16 N/m³)x⁴/4 + C.

Step 5: Apply the condition that U(0) = 0 to find the constant C: 0 = -(16 N/m³)(0)⁴/4 + C. Hence, C = 0.

Therefore, the potential energy U(x) is given by: U(x) = -(16 N/m³)x⁴/4.

To know more about potential energy :

https://brainly.com/question/24284560

#SPJ11