A 35 gram of saturated solution is distilled out completely. If the solubility of the solute is 110, find the amount of residue solute snd distilled water

Answer: Since oxygen is in group 6 on the periodic table, its valency is  

2 −

and hence so is its oxidation number.

But there are 2 oxygen atoms for each carbon atom so the total negative charge due the oxygen is  

4 −

But since a molecule must have a net charge of zero in the free form, it implies that the oxidation number of the carbon atom must then be  

+ 4

Answer:

C₅H₁₂ + 8O₂ → 5CO₂ + 6H₂O

Explanation:

Let's start by counting how many molecules we have on each side.

Reactants

C - 5

H - 12

O - 2

Products

C - 1

O - 3

H - 2

We have to balance both sides. Since we have 5 carbon atoms on the reactants side and 1 carbon atom on the products side, we'll start with that. Write 5 as the coefficient for CO₂ to balance the carbons.

C₅H₁₂ + O₂ → 5CO₂ + H₂O

Now that the carbons are balanced, let's look at the hydrogens. There's 12 on the reactants side and 2 on the products side. To balance the hydrogens, we have to write 6 as the coefficient for H₂O.

C₅H₁₂ + O₂ → 5CO₂ + 6H₂O

Now the hydrogens are balanced. All that's left to do is balance the oxygens. Let's start by counting how many atoms we have on each side.

Reactants

C - 5

H - 12

O - 2

Products

C - 5

H - 12

O - 16

So, to balance the number of atoms on both sides, write 8 as the coefficient for O₂.

C₅H₁₂ + 8O₂ → 5CO₂ + 6H₂O

Lastly, let's check to make sure everything is balanced.

Reactants

C - 5

H - 12

O - 16

Products

C - 5

O - 16

H - 12

Both sides are balanced. Therefore, the balanced chemical equation is: C₅H₁₂ + 8O₂ → 5CO₂ + 6H₂O.

Hope that helps.

Answer:

[tex]\boxed{C_{5}H_{12} + 8O_{2} -->5CO_{2} + 6H_{2}O}[/tex]

Explanation:

Part 1: Count the number of atoms on each side per element

To start, count the number of atoms per element on both sides of the equation.

Left Side

C - 5 atoms

H - 12 atoms

O - 2 atoms

Right Side

C - 1 atom

H - 2 atoms

O - 3 atoms

Part 2: Balance carbon atoms

Now, with this information, you can begin finding out how to properly balance both sides of the equation.

You need 5 carbon atoms on the left, so place a coefficient of 5 in front of the [tex]CO_{2}[/tex] product. This will balance the carbons. Do not place a coefficient in front of the [tex]C_{5}H_{12}[/tex] reactant - none are necessary!

Then, you can update your counts for your atoms.

Left Side

C - 5 atoms

H - 12 atoms

O - 2 atoms

Right Side

C - 5 atoms

H - 2 atoms

O - 11 atoms

The updated equation will look like this:

[tex]\boxed{C_{5}H_{12}+O_{2} --> 5CO_{2} + H_{2}O}[/tex]

Part 3: Balance hydrogen atoms

Now, balance the hydrogen atoms. Place a coefficient of 6 in front of the [tex]H_{2}O[/tex] product. This will balance the hydrogen atoms.

Once again, update the atom counts:

Left Side

C - 5 atoms

H - 12 atoms

O - 2 atoms

Right Side

C - 5 atoms

H - 12 atoms

O - 16 atoms

The updated equation will look like this:

[tex]\boxed{C_{5}H_{12} +O_{2}--> 5CO_{2} +6H_{2}O}[/tex]

Part 4: Balance oxygen atoms

To fully balance the equation, place a coefficient of 8 in front of the [tex]O_{2}[/tex] reactant. This will equalize the amount of oxygen atoms on both sides of the equation.

The updated equation will look like this:

[tex]\boxed{C_{5}H_{12} + 8O_{2} --> 5CO_{2} + 6H_{2}O}[/tex]

Part 5: Check the equation and atom counts

Now, update the atom counts one last time to make sure they are equal.

Left Side

C - 5 atoms

H - 12 atoms

O - 16 atoms

Right Side

C - 5 atoms

H - 12 atoms

O - 6 atoms

They are equal, so you may proceed.

Part 6: Check if reductions are necessary

If the equations coefficients can all be divided by a common divisor (i.e., 3), follow up with that step. However, any equation that has a reactant or product without a coefficient, skip this step entirely.

This equation falls into that category, so you may proceed past it.

Your final equation will look like this: [tex]\boxed{C_{5}H_{12} + 8O_{2} -->5CO_{2} + 6H_{2}O}[/tex]

Answer:

See explanation

Explanation:

Charles law gives the relationship between volume and temperature of a gas. Charles law States that, the volume of a given mass of gas is directly proportional to its temperature at constant pressure.

Theoretically, it is assumed that when the absolute zero temperature has been achieved, the volume of any ideal gas will be found to be equal to zero. If the volume of the gas is zero, it now implies that all molecular motion will be stopped. This does not happen in real gases as all gases are found to condense to solids or liquids when this temperature is exceeded.

When volume is plotted against temperature, volume of the gas approaches zero at t = −273.15 °C, which is the x-intercept of the Charles law graph. Below this temperature, we can only get negative values of volume which does not exist hence, −273.15 °C is the lowest attainable temperature also known as the absolute zero.

The single mark placed on the sidewalk by Julie has been acting as the reference point for detecting the motion of the snail. Thus, option D is correct.

The snail has been the shelled animal that has been mostly residing in the resting condition with limited movement. To evaluate the movement of the snail, there has been the consideration of a point that was the starting point from the movement.

The line that has been set across the sidewalk has been acting as the reference, and the distance traveled has been calculated from that point. Thus, option D is correct.

For more information about the reference point, refer to the link:

https://brainly.com/question/1674904

Answer:

[tex]\boxed{\mathrm{Iodine}}[/tex]

Explanation:

Halogens are elements in group 17 or 7 in the periodic table.

Iodine is a halogen.

Therefore, iodine, an Halogen

Learn more at: https://brainly.com/question/15852546?referrer=searchResults

Answer:

The solubility of KCl is 1.93 mol/dm³

Explanation:

The information given are;

The mass of the potassium chloride, KCl = 144 g

The volume of the water solvent = 1000 cm³ = 1 dm³

The temperature of the solvent = 90 °C

The atomic mass of potassium, K = 39 u

The atomic mass of chlorine, Cl = 35.5 u

The number of moles of potassium in one mole of potassium chloride, KCl = 1 mole

The number of moles of chlorine in one mole of potassium chloride, KCl = 1 mole

The molar mass of the potassium chloride = 39 + 35.5 = 74.5 g/mol

The number of moles, n, of potassium chloride, KCl in 144 g of potassium chloride, KCl is given as follows

n = Mass/(Molar mass) = 144/74.5 = 1.93 moles

1.93 moles will dissolve in 1 dm³

Therefore, the solubility of KCl is 1.93 mol/dm³.

Answer:

oppositely charged ions in a chemical compound

Explanation:

Answer:

Between ions

Explanation:

Explanation:

Deliquescent substances are solids that absorb moisture from the atmosphere until they dissolve in the absorbed water and form solutions. Efflorescent: Efflorescent substances are solids that can undergo spontaneous loss of water from hydrated salts.

Answer:

balanced equation:

2Ca(NO3)2 (aq)-----> 2CaO (s) + 4NO2 (g) + O2 (g)

So heating 2 moles of Ca(NO3)2 gives 2 moles of CaO, 4 moles of NO2 and 1 mole of O2. This is a heat decomposition reaction. It gives a white precipitate (CaO), and brown pungent gas (NO2).

Answer:

The balanced equation of the reaction is below.

Explanation:

2Ca(NO3)2 -----> 2CaO + 4NO2 + O2.

Answer:

25 g

Explanation:

Mass percent implies the mass of solute dissolved in a solution

Mass percent = mass of solute/mass of solute + mass of solvent × 100/1

Since mass percent concentration= 20%

Mass of solvent = 100g

Let mass of solute = x

Hence;

20 = x/x +100 ×100/1

20/100= x/x + 100

0.2 = x/x + 100

0.2(x + 100) = x

0.2x + 20 = x

20 = x - 0.2x

20 = 0.8x

x= 20/0.8

x= 25 g

Answer:

Chemical Changes are also called Chemical Reactions. Chemical reactions involve combining different substances. The chemical reaction produces a new substance with new and different physical and chemical properties. Matter is never destroyed or created in chemical reactions.

Explanation:

Answer:

The acid solution is a concentrated solution.

Explanation:

Acetic acid is a weak acid, because it ionizes partially in water as shown below:

CH3COOH + H2O —> H3O+ + CH3COO-

A solution containing a larger quantity of acetic acid is termed concentrated solution.

This is so because a concentrated solution is a solution that contains more of the solute than the solvent.

A solute is the substance which dissolves in the solvent.

A solvent is the substance which dissolves a solute.

In this case, acetic acid is the solute and water is the solvent.

Solution is simply the combination of solute and solvent

Solution => Solute + Solvent

More solute + Less solvent => Concentrated solution

Therefore, a solution containing a higher quantity of acetic acid ( i.e the solute) in water (i.e the solvent) is called a concentrated solution.

Answer:

The correct options are;

C. Divergent plate boundary

D. Normal faults

Explanation:

Tensile stress tends to pull objects part by acting axially upon the object to pull the object on a cross section perpendicular to the objects cross-section

The most common stress in convergent plate boundaries is compression stress

The most common stress in divergent plate boundaries is tensile stress

In the presence of tensile stress, normal faults results in the raising of mountains due to their enormous forces

Therefore, the features of Earth's crust involving tension are divergent plate boundary and normal faults.

Answer:c and d

Explanation:

Answer:

Yes, at 20 °C the tank was filled to full capacity

Explanation:

Given;

let initial pressure, P₁ = 2.37 atm

let initial volume, V₁ = 1860 L

let final pressure, P₂ = 220 bar = 217.123 atm

let final volume, V₂ = ?

Subject the air volume (1860 L )  at 2.37 atm to the tank rating (220 bar)

Ideal law is given by;

PV = nRT

At a fixed mole and gas temperature, the equation becomes;

P₁V₁ = P₂V₂

V₂ = (P₁V₁) / P₂

V₂ = (2.37 x 1860) / 217.123

V₂ = 20.3 L

After subjecting the air volume to tank rating, the volume of the air at 220 bar is 20.3 L which is greater than tank volume (18 L).

The extra 2.3 L can be assumed to be compressed gas volume due to the given (lower) temperature.

Thus, at 20 °C the tank was filled to full capacity.

Answer:

The chemical bond between 2 molecules is called an intermolecular force.

Answer:

Chemical Bond:

Attraction between two atoms results in the formation of a bond which is called a chemical bond.

Inter molecular Forces:

Attractive Force that in between 2 molecules is called Inter molecular Forces. (Inter : Between)

Explanation:

astronomers have discover that in general the future of a Galaxy is, the more redshift light is this mean that the further away the Galaxy are the faster they are moving this is similar to explosion where the bits moving fastest travel for furthest on the explosion redshift data provides evidence that the universe including space itself is expanding .

Answer:

A large point of evidence in this would be the rate of increase in how fast the polar ice caps are melting and the ocean is rising as a result. As the climate is getting warmer so are the oceans and this is causing the ice caps which are in the ocean.

Explanation:

Answer:

Here's what I get from one source.

Explanation:

[tex]\begin{array}{lc}\textbf{Source} &\textbf{Contribution \%} \\\text{Space heating }& 45\\\text{Water heating} &18\\\text{Space cooling} & 9 \\\text{Computers/Electronics} & 6 \\\text{Lighting} & 6 \\\text{Cooking} & 4 \\\text{Refrigeration} & 4 \\\text{Wet cleaning} & 3 \\\text{Other} & 5 \\\end{array}[/tex]

The pie chart is in the Figure below.

Answer:

Option B. K = 1.3×10⁴, product favored

Explanation:

Data obtained from the question include:

O2(g) + 2SO2(g) <==> 2SO3(g)

Concentration of O2, [O2] = 0.024 M

Concentration of SO2, [SO2] = 0.015 M

Concentration of SO3, [SO3] = 0.26 M

Equilibrium constant, K =..?

The equilibrium constant, K is simply defined as the ratio of the concentration of products raised to their coefficient to the concentration of the reactants raised to their coefficient.

The equilibrium constant for the above reaction can be written as

K = [SO3]² / [O2] [SO2]²

Inputing the values of [SO3], [O2] and [SO2] the equilibrium constant, K is:

K = [SO3]² / [O2] [SO2]²

K = 0.26² / 0.024 × 0.015²

K = 1.3×10⁴

Therefore, the equilibrium constant K is 1.3×10⁴.

Since the value of the equilibrium constant, K is large and positive, therefore, the reaction favours the product.

Answer:

The statement that describes an electron is "It has a negative charge and is located in orbitals around the nucleus." Electrons are the smallest of the three particles that make up atoms

Explanation:

Electrons are found in shells or orbitals that surround the nucleus of an atom

Electrons are the sub-atomic particles that carry a negative charge over them. In the atom, the electrons are found in the orbitals or the shells around the nucleus. Thus, option D is correct.

Electrons are the smallest sub-atomic particle that has been known to carry a negative charge and are found in the orbitals of the atom. The charge carried by an electron is 1.602 x 10⁻¹⁹ coulomb and is small than the proton and neutron.

They revolve around the nucleus in their orbits and exhibit the properties of waves and matter. The number of electrons and protons are the same in a neutral atom which makes the atomic number.

Therefore, the electrons have been known to carry a negative charge that revolves in orbit around the nucleus.

Learn more about electrons here:

https://brainly.com/question/11670765

#SPJ6

Your question is incomplete, but most probably your full question was, Which statement describes an electron?

Answer:  [tex]CH_3CH_2CH_2CHO[/tex] has aldehyde functional group.

Explanation:

Functional groups are specific group of atoms within molecules that are responsible for the characteristic chemical reactions of those molecules.

A.  [tex]CH_3CH_2CH_2COCH_3[/tex] has ketone [tex]C=O[/tex] functional group .

B.  [tex]CH_3CH_2CH_2COOH[/tex] has carboxylic acid [tex]COOH[/tex] functional group .

C.  [tex]CH_3CH_2CH_2CHO[/tex] has  aldehyde [tex]H-C=O[/tex] functional group .

D. [tex]CH_3CH_2CH_2COOCH_3[/tex] has ester [tex]RO-C=O[/tex] functional group .

Thus [tex]CH_3CH_2CH_2CHO[/tex] has aldehyde (CHO) group.

Answer:

(b)

Explanation:

The 3s^2, 3p^6  orbitals form  -3 charge.

This is the element phosphorous and an example of a -3 ion is in aluminium phosphide, AlP3.

The electronic configuration which represents the element forming a simple ion having with a charge of -3 is; 1s², 2s², 2p⁶, 3s², 3p³. Option B is correct.

In this electronic configuration, the element has a total of 16 electrons. To form a simple ion with a charge of -3, the element needs to gain three electrons. This is achieved by adding three extra electrons to the existing configuration.

When the element gains three electrons, the electron configuration becomes:

1s², 2s², 2p⁶, 3s², 3p⁶

This configuration represents the stable octet configuration, where the element has a complete outer shell with eight electrons. Since the charge is -3, it means the element has gained three extra electrons to achieve a stable configuration.

Therefore, the correct electronic configuration representing the element that forms a simple ion with a charge of -3 is 1s², 2s², 2p⁶, 3s², 3p³

Hence, B. is the correct option.

To know more about electronic configuration here

https://brainly.com/question/29184975

#SPJ2

Explanation:

pH is used to measure the concentration of H+ ions ([H+]) and therefore, whether a substance is acidic or basic (alkaline). Solutions with a pH of less than seven are acidic, while those with a pH greater than seven are basic (alkaline).

Answer:

greater than 7

Explanation:

A base is any solution with a pH greater than 7. A pH of 7 is considered neutral. For example, the pH of water. An acid is any solution with a pH less than 7.

Hope that helps.

Answer:

The correct option is;

The reaction pathway for the trials is different

Explanation:

The effect of a catalyst in a chemical reaction is to increase the rate of a reaction by changing the pathway or mechanism of the reaction and/or to lower the transition state's energy thereby lowering the activation energy of the reaction

The pathway of the reaction is changed by the catalyst by the formation of intermediate compounds by the catalyst which require lower activation energy to form the products than the original non-catalyzed reactants. In the process the catalyst is regenerated, thereby, not taking part in the reaction.

Answer:

A.

Explanation:

Higher temperature - more kinetic energy - more space between particles - higher volume.

Answer:

d

Explanation:

i got it right

Gas A is likely to have the lowest temperature.  Hence, option A is correct.

The smallest particle of a substance has all of the physical and chemical properties of that substance. Molecules are made up of one or more atoms.

In a gas, the kinetic energy is directly proportional to the temperature under constant pressure and volume.

As you can see in the problem, the average of A has low kinetic energy. But the average is increasing between B, C and D.

As gas A has the lowest average kinetic energy:

Gas A is likely to have the lowest temperature

Hence, option A is correct.

Learn more about molecules here:

https://brainly.com/question/28069497

#SPJ2

[tex]7.408 \;X 10 ^ {-3} m^{-2} s^{-1}[/tex]  is rate of a reaction when k = 0.2, [A] = 3 M, [B] = 3 M, m = 1, n = 2 .

The rate at which the concentration of reactant or product participating in a chemical reaction alters is called the rate of reaction.

Rate of reaction = [tex]\frac{change \;in \;concentration}{time}[/tex] =  (mol/litre)/time.

m= 1 and n = 2

[tex]rate = K [A] [B]^2[/tex]

[tex]0.2 = K X 3 X 3 ^2[/tex]

K =   [tex]\frac{0.2 }{27 }[/tex]

K =   [tex]7.408 \;X 10 ^ {-3} m^{-2} s^{-1}[/tex]

Hence, [tex]7.408 \;X 10 ^ {-3} m^{-2} s^{-1}[/tex]  is rate of a reaction when k = 0.2, [A] = 3 M, [B] = 3 M, m = 1, n = 2 .

Learn more about the rate of a reaction here:

https://brainly.com/question/8592296

#SPJ2

Answer: 7.4 10-3

Explanation:

7.4 10-3 this is right ong

Answer:

0.020g de sulfato de plomo se requieren

La concentración de la solución diluida es de 3ppm

Explanation:

Las partes por millón (ppm) son definidas como:

miligramos soluto / 1L solución.

Si deseas preparar una solución a 100ppm de sulfato de plomo (II) necesitas 100mg de este sulfato en 1L. En 200mL = 0.200L vas a necesitar:

0.200L × (100mg / 1L) = 20mg de sulfato de plomo (II).

Como 1000mg = 1g,

20mg × (1g / 1000mg) = 0.020g de sulfato de plomo se requieren.

Ahora, se van a tomar 30mL de esta solución y se diluirán a 1000mL. Se diluye la solución:

1000mL / 30mL = 33.33 veces.

Como la solución inicial es de 100ppm, esta dilución genera una solución de concentración:

100ppm / 33.33 = 3ppm

Answer:

[tex]\large \boxed{\sf subatomic \ particles}[/tex]

Explanation:

The smaller particles in an atom are called subatomic particles. Subatomic particles include electrons, protons, and neutrons.

Answer:

A

Explanation:

civil deals with desighning, construction work of natural or physical environment and a fits guess