Answer:
Approximately 17.21 seconds
Explanation:
With subtraction, we have the gazelle 18.3 km/h slower than the cheetah, which is about 5.08333 m/s. As the gazelle is 87.5 meters ahead of the cheetah, 87.5 divided by 5.083333333 is about 17.21 seconds.
Imagine that you throw a rock into the air. When you release the rock, it is moving at 19.4 m/s. The rock flies straight up into the air and returns back to your hand. For how long was the rock in the air? Note: acceleration due to gravity is -9.81 m/s/s.
Answer:
4 s
Explanation:
The following data were obtained from the question:
Initial velocity (u) = 19.4 m/s.
Acceleration due to gravity (g) = –9.81 m/s²
Total time (T) =.?
Next, we shall determine the time take by the rock to get to the maximum height. This can be obtained as follow:
NOTE: At maximum height, the final velocity is zero.
Initial velocity (u) = 19.4 m/s.
Acceleration due to gravity (g) = –9.81 m/s²
Final velocity (v) = 0 m/s
Time taken to reach the maximum height (t) =.?
v = u + gt
0 = 19.4 + (–9.81 × t)
0 = 19.4 – 9.81t
Collect like terms
0 – 19.4 = –9.81t
–19.4 = –9.81t
Divide both side by –9.81
t = –19.4 / –9.81
t ≈ 2 s
Thus, it took approximately 2 s for the rock to reach its maximum height.
Finally, we shall determine the total time spent by the rock in the air as follow:
Time taken to reach the maximum height (t) = 2 s
Total time spent in air (T) =?
The total time (T) spent by the rock in the air will be two times the time taken (t) to reach the maximum height i.e
T = 2t
t = 2 s
T = 2 × 2
T = 4 s
Therefore, the rock spent approximately 4 s in the air.
One end of a horizontal string is attached to a vibrating blade, and the other end passes over a pulley as in Figure (a). A sphere of mass 1.00 kg hangs on the end of the string. The string is vibrating in its second harmonic. A container of water is raised under the sphere so that the sphere is completely submerged. In this configuration, the string vibrates in its second harmonic (or the third normal mode of oscillation) as shown in Figure (b). What is the radius of the sphere?
Answer:
when it weighs 2kg it is 7.38
Explanation:
hope this helps
A 10 [kg] object is dropped from rest. a. How far will it drop in 2 [s]?
Answer:
y=0.5 g t^2
=0.5*10*2^2
=20 m
Someone please makeup a hypothesis for me rq make it make sense!
What kind of workplace is a mine?
A storm is moving east toward your house at an average speed of 35 km an hour if the storm is currently 80 km from your house and how much time do you expect it to arrive
Answer: 2 hours 17 minutes
Explanation: 80/35h = 16/7 = 2hrs 17 minutes
Centripetal acceleration must involve a change in
Answer:
Centripetal acceleration must involve a change in a. an object's tangential speed.
Explanation:
Centripetal acceleration must involve a change in direction of motion of the object.
What is centripetal acceleration?centripetal acceleration is the acceleration of a body traversing a circular path. Because velocity is a vector quantity (that is, it has both a magnitude, the speed, and a direction), when a body travels on a circular path, its direction constantly changes and thus its velocity changes, producing an acceleration. The acceleration is directed radially toward the center of the circle.
In your daily existence, you must have encountered numerous instances of centripetal acceleration. A centripetal acceleration occurs when you drive in a circle, and a centripetal acceleration also occurs when a satellite orbits the earth. Centripetal refers to being in the center.
Learn more about centripetal acceleration here:
https://brainly.com/question/14465119
#SPJ2
This is about acceleration, velocity and all that mumbo jumbo
Which best depicts the data?
1, From 0 to 2 seconds, Anna experienced negative acceleration.
2, From 3 to 6 seconds, Elan accelerated while Anna did not.
3, From 6 to 8 seconds, Elan accelerated faster than Anna.
4, From 8 to 10 seconds, Elan experienced negative acceleration.
Answer:
[tex]3. \: From \: 6 \: to \: 8 \: seconds, \: Elan \: \\ accelerated \: \: faster \: than \: Anna. [/tex]
What is the average velocity of a boy moving from initial position of 4 m to a final position of 8 min 20 s. Show steps of solving:
please please heeeeelp
9514 1404 393
Answer:
0.2 m/s
Explanation:
The average velocity is the change in position divided by the change in time:
(8 m -4 m)/(20 s) = (4/20) m/s = 1/5 m/s = 0.2 m/s
The boy's average velocity is 0.2 m/s.
Select the correct answer.
Which scientist discovered the relationship between electricity and magnetism?
OA.
Nikola Tesla
OB
Alessandro Volta
OC.
Hans Christian Oersted
OD
Isaac Newton
Answer:
Hans Christian Oersted
Explanation:
In what climates would you expect soil to form fastest? Why?
Answer:
Soils develop faster in warm, moist climates and slowest in cold or arid ones. Rainfall is one of the most important climate factors in soil formation.
Please mark me brainliest!
Hope this helped God bless :)
Soil formation occurs more swiftly in warm, humid areas than it does in cold or arid ones.One of the most crucial climatic variables for the formation of soil is rainfall. The breakdown of large soil particles into smaller ones is accelerated by creatures such as bacteria, plants, and animals.
What climates soil to form fastest?The rate of chemical reactions is accelerated by rising temperature, which also accelerates soil formation. Faster plant and bacterial growth in warmer climates aids in the weathering of materials and the formation of soils.
The formation of soil is another indirect effect of climate on organisms. Weathering is accelerated by precipitation and warm temperatures, which increases the amount of soil development. Rainfall increases the amount of organic matter, lowers pH, accelerates the leaching of basic ions, moves mud, etc.
Therefore, In warm, wet regions, soil development happens more quickly than in cold or arid ones. One of the most crucial climatic variables for the formation of soil is rainfall.
Learn more about climate here:
https://brainly.com/question/29166575
#SPJ1
Like chargers attract one another
nope. opposite charges attract. like charges repel.
A ball is thrown horizontally from a 12 m
building with a speed of 2.0 m/s.
-high
How far from the base of the building does the ball hit the ground ?
Answer:
24
Explanation:
you multiply 2.0x12
An airplane flying at 119 m/s is accelerated uniformly at the rate of 0.5 m/s2 for 10
seconds. What is its final speed?
Answer:
124m/s
Explanation:
v=u+at
v=119+(0.5×10)
v=119+5
v=124m/s
A 65.25 kg person holding a steel ball stands motionless on a frozen lake.
The person then throws the ball, which propels the person at 1.25 m/s to the
right and the ball 4.05 m/s to the left. If the initial momentum of the system is
zero, what is the mass of the steel ball?
Answer:
20.14 KG
Explanation:
apex keepy o heads up stay positive don't stress over something useless big future 4 all of yall!
The mass is 20.14 kg
1) A rigid tank contains 2 kg of 134a refrigerant at 800 kPa and 120°C. Determine tank volume and total internal energy.
Answer:
V = 0.07525 [m³]
U = 655.74 [kJ]
Explanation:
To solve this problem we must use the superheated refrigerant table for refrigerant 134a. The attached image shows the specific volume and specific internal energy values for a pressure of 800 [kPa] and a temperature of 120 [°C].
m = mass =2 [kg]
the specific volume = v = 0.037625 [m³/kg]
The volume of the tank can be found using the following expression:
V = v*m
V = 0.037625*2 = 0.07525 [m³]
The Specific internal energy = u = 327.87 [kJ/kg]
U = u*m
U = 327.87*2 = 655.74 [kJ]
Which of the following choices is not part of the scientific method
Answer:
What are the choices?
Explanation:
Page
1
of 3
0
ZOOM
3. A cat is moving at 18 m/s when it accelerates at 4 m/s? for 2 seconds. What is his new
velocity?
Answer:
26 m/s
Explanation:
v = u + at
Given that,
u(initial speed) = 18 m/sa (acceleration) = 4m/s^2t ( time) = 2sand v ( final velocity) = ?
v = 18 + ( 4 × 2)
v = 18 + 8
v = 26 m/s
SOMEONE PLEASE PLEASE HELP QUICK PICTURE INCLUDED
Answer:
A
Explanation:
Switches are used to block electrical currents, thus needing to be made out of insulating material.
A net force of 275 N accelerates a 18.0 kg mass. What is the resulting acceleration? (5 points)
Answer:
The answer is 15.28 m/s²Explanation:
The acceleration of an object given it's mass and the force acting on it can be found by using the formula
[tex]a = \frac{f}{m} \\ [/tex]
where
m is the mass
f is the force
We have
[tex]a = \frac{275}{18} \\ = 15.277777...[/tex]
We have the final answer as
15.28 m/s²Hope this helps you
A mountain biker is climbing a steep 20° slope at a constant speed. The cyclist and bike have a combined weight of 800 N. What can you say about the magnitude of the normal force of the ground on the bike?
Answer:
Normal force = 751.75 N
Explanation:
It is given that,
The combined weight of the cyclist and the bike is 800 N
We need to find the magnitude of the normal force of the ground on the bike. It can be given by the formula as follows :
[tex]N=mg\cos\theta[/tex]
mg = W, combined weight of cyclist and bike
[tex]N=W\cos\theta\\\\N=800\times \cos(20)\\\\N=751.75\ N[/tex]
So, the magnitude of the normal force of the ground on the bike is 751.75 N.
The magnitude of the normal force of the ground on the bike is 751.752 N
The formula for that will be used to calculate the normal force of the ground on the bike is expressed as:
[tex]N= Fcos \theta[/tex]
F is the combined weight
[tex]\theta[/tex] is the angle of inclination
Given the following paramters
F = 800 N
[tex]\theta[/tex] = 20 degrees
Substitute the given parameters into the formula:
[tex]N=800 \times cos20^0\\N=800 \times 0.9397\\N=751.752N[/tex]
Hence the magnitude of the normal force of the ground on the bike is 751.752 N
Learn more here: https://brainly.com/question/12408868
When a 600 g mass is suspended from a spring, the spring stretches 1.2 cm. What is the spring constant of the spring?
Well first you need to know the formula for the spring force. It’s -1/2k*d
K being the constant
D being the displacement
We can actually find the force on the spring by calculating the weight of the block. It would be mass multiplied by gravity, convert the grams to kilograms first tho.
600/1000 = 0.6kg
0.6kg * 9.8 m/s^2 = 5.88N
Now plug everything into the equation, also convert the centimeters to meters:
1.2/100 = 0.012 meters
5.88 = -1/2k*(0.012)
5.88 = k*(0.006)
We could drop the negative sign because we really just want the magnitude of the spring constant.
K = 980N
the wire is 5.20 cm from the charge and carries a current of 68.5 A in a direction opposite to that of the moving charge. Calculate the magnitude of the force on the charge.
Complete Question
A 6.00-µc charge is moving with a speed of 7.50x10^4 m/s parallel to a very long, straight wire. the wire is 5.20 cm from the charge and carries a current of 68.5 A in a direction opposite to that of the moving charge. Calculate the magnitude of the force on the charge.
Answer:
The value is [tex]F =1.20 *10^{-4} \ N[/tex]
Explanation:
From the question we are told that
The magnitude of the charge is [tex]Q = 6.00\muC = 6.00 *10^{-6} \ C[/tex]
The speed is [tex]v = 7.50 *10^{4} \ m/s[/tex]
The distance of the wire from the charge is [tex]d = 5.20 \ cm = 0.0520 \ m[/tex]
The current flowing through the wire in the opposite direction to the charge is [tex]I _2 = 68.5 \ A[/tex]
Gnerally the magnitude of force on that charge is mathematically represented as
[tex]F = qvB[/tex]
Here B is magnetic field which is mathematically represented as
[tex]B = \frac{\mu_o * I}{2\pi d}[/tex]
Here [tex]\mu_o[/tex] is the permeability of free space with value [tex]\mu_o = 4\pi * 10^{-7} N/A^2[/tex]
So
[tex]F = qv[\frac{\mu_o * I}{2\pi d}][/tex]
=> [tex]F = 6.0*10^{-6} * (7.50 *10^{4})[\frac{4\pi * 10^{-7} * 68.5 }{2* 3.142 * 0.0520 }][/tex]
=> [tex]F =1.20 *10^{-4} \ N[/tex]
Compact fluorescent bulbs are much more efficient at producing light than are ordinary incandescent bulbs. They initially cost much more, but last far longer and use much less electricity. According to one study of these bulbs, a compact bulb that produces as much light as a 100 W incandescent bulb uses only 23.0 W of power. The compact bulb lasts 10000 hours, on the average, and costs $ 12.00, whereas the incandescent bulb costs only $ 0.76, but lasts just 750 hours. The study assumed that electricity cost $ 0.090 per kilowatt-hour and that the bulbs were on for 4.0 h per day.
Required:
a. What is the total cost (including the price of the bulbs) to run each bulb for 3.0 years?
b. How much do you save over 3.0 years if you use a compact fluorescent bulb instead of an incandescent bulb?
c. What is the resistance of a "100-W" fluorescent bulb?
Answer:
a
[tex]The \ price \ for \ Compact\ fluorescent\ bulbs \ is \ C_T = \$ 21.067\\The \ price \ for \ incandescent\ bulb \ is \ C_t = \$ 43.98[/tex]
b
[tex]The \ amount \ saved \ is \ C_S = \$ 22.913[/tex]
c
[tex]The \ resistance \ is \ R = 626.1 \Omega[/tex]
Explanation:
From the question we are told that
The power used by incandescent bulb [tex]P_r = 23.0 W[/tex]
The power used by Compact fluorescent bulb [tex]P_p = 100W[/tex]
The life span of Compact fluorescent bulb is [tex]t = 1000 \ hours[/tex]
The prices of Compact fluorescent bulb is [tex]C_c = \$ 12 [/tex]
The prices of incandescent bulb is [tex]C_i = \$ 0.76 [/tex]
The life span of incandescent bulb is [tex]t_k = 750 \ hours[/tex]
The cost of electricity is [tex]C_e = \$ 0.090/ kilowatt-hour = \frac{0.090}{1000} = \$0.00009 / W / h[/tex]
The duration of daily bulb usage is [tex]t_d = 4 \ hours[/tex]
Generally 3 years of bulb usage in hours is mathematically evaluated as
[tex]t_3 = 3 * 365 * t_d[/tex]
=> [tex]t_3 = 3 * 365 * 4[/tex]
=> [tex]t_3 = 4380 \ h [/tex]
Generally the cost to power a 23W bulb for the above duration is mathematically represented as
[tex]Z = 23 * t_3 * C_e[/tex]
=> [tex]Z = 23 * 4380 * 0.00009[/tex]
=> [tex]Z = \$ 9.0667[/tex]
The number of Compact fluorescent bulbs required to achieve this about of time is mathematically represented as
[tex]N = \frac{t_3}{ t}[/tex]
=> [tex]N = \frac{4380}{1000}[/tex]
=> [tex]N = 0.438 [/tex]
=> [tex]N \approx 1 [/tex]
The total cost of usage for the Compact fluorescent bulb is mathematically represented as
[tex]C_T = Z +C_c[/tex]
=> [tex]C_T = 9.0667 +12[/tex]
=> [tex]C_T = \$ 21.067 [/tex]
The number of incandescent bulbs required to achieve this about of time is mathematically represented as
[tex]M = \frac{t_3}{ t_k}[/tex]
=> [tex]M = \frac{4380}{750}[/tex]
=> [tex]M = 6 [/tex]
Generally the cost to power a 100W bulb for the above duration is mathematically represented as
[tex]Z = 100 * t_3 * C_e[/tex]
=> [tex]Z = 100 * 4380 * 0.00009[/tex]
=> [tex]Z = \$ 39.42[/tex]
The total cost of usage for the incandescent bulbs is mathematically represented as
[tex]C_t = C_e + [6 *C_i][/tex]
=> [tex]C_t = 39.42 + [0.76 * 6][/tex]
=> [tex]C_t = \$ 43.98[/tex]
Generally the total amount saved is mathematically represented as
[tex]C_S = C_t - C_T[/tex]
=> [tex]C_S = 43.98 - 21.067[/tex]
=> [tex]C_S = \$ 22.913[/tex]
Generally the resistance of the Compact fluorescent bulb is
[tex]R = \frac{V^2}{P}[/tex]
[tex]R = \frac{120^2}{23}[/tex]
[tex]R = 626.1 \Omega[/tex]
A fundraising company agrees to donate an extra $75 for every $100 the school raises through selling cookies. Part A: What is the constant of proportionality
Answer:
3/4 0r 0.75
Explanation:
Let E represent the extra cash.
Let R represent the amount raised.
From the question given above, we can say that:
The extra cash (E) is directly proportional to the amount raised (R) i.e
Extra cash (E) ∝ Amount raised (R)
E ∝ R
E = KR
NOTE: K is the constant of proportionality.
With the above formula, we can obtain the value of K as follow:
Extra cash (E) = $ 75
Amount raised (R) = $ 100
Constant of proportionality (K) =?
E = KR
75 = K × 100
Divide both side by 100
K = 75/100
K = 3/4 0r 0.75
Thus, the constant of proportionality is 3/4 0r 0.75
Tell which is the answer
help please
Answer: a constant? im not sure that just sounds like itd be right.
Explanation:
Answer:
b
Explanation:
because he isn't moving
Add the following vectors:
(a) (12, 5) + (6, 3)
(b) (−3, 8) + (6, −2)
(c) (3, 8, −7) + (7, 2, 17)
(d) (a, b, c) + (d, e, f)
Answer:
a. (18,8)
b. (3, 6)
c. (10, 10, 10)
d. (a+d, b+e, c+f)
Give me brainliest for this... Thanks
why cats cannot run on smoth table
Answer:
bc of their paw pads, they don't get the traction they need in order to be able to get a firm grip to push off of on the table for each bound
Explanation:
A 100 kg disc with radius 1.6 m is spinning horizontally at 25 rad/s. You place a 20 kg brick quickly and gently on the disc so that it sticks to the edge of the disc. Determine the final angular speed of the disc-brick system.
Answer:
20.83rad/s
Explanation:
Using the law of conservation of momentum
m1u1+m2u2 = (m1+m2)v
m1 and m2 are the mass of the disc and Brick respectively
u1 and u2 are the linear velocities respectively
v is their final velocity of the block-disc system
Given
m1 = 100kg
m2 = 20kg
u1 = wr =25×1.6
u1 = 40m/s
u2 = 0m/s (brick is stationary)
Substitute and the final linear velocity v
100(40)+20(0) = (100+20)v
4000 = 120v
v = 4000/120
v = 33.3m/s
From the formula;
v = wr
w = v/r
w= 33.3/1.6
w = 20.83rad/s.
Hence the final angular speed of the disc-brick system is 20.83rad/s
Object has a mass of 35g and a density of 5g/cm3.
What is the volume? *
Answer:
The answer is 7.0 mLExplanation:
The volume of a substance when given the density and mass can be found by using the formula
[tex]volume = \frac{mass}{density} \\[/tex]
From the question
mass = 35 g
volume = 5 g/cm³
We have
[tex]volume = \frac{35}{5} \\ [/tex]
We have the final answer as
7.0 mLHope this helps you