A city's yearly snowfall in inches over the last 5 years is recorded.

What is the mean of the snowfall in the last 5 years and how can it be interpreted?

Responses:

A mean of 25 shows that the data values are relatively close together. It represents that typically the city's snowfall has been about 25 inches yearly the last 5 years.

A mean of 25 shows that the data values are spread out. It represents that the city's snowfall has been exactly 25 inches each year for the last 5 years.

A mean of 27.2 shows that the data values are relatively close together. It represents that typically the city's snowfall has been about 27.2 inches yearly the last 5 years.

A mean of 27.2 shows that the data values are spread out. It represents that the city's snowfall has been exactly 27.2 inches each year for the last 5 years.

Year Snowfall (inches)
2015 25
2016 27
2017 25
2018 29
2019 30

so 0.5% rate

[tex]~~~~~~ \textit{Simple Interest Earned} \\\\ I = Prt\qquad \begin{cases} I=\textit{interest earned}\\ P=\textit{original amount deposited}\dotfill & \$17525\\ r=rate\to 0.5\%\to \frac{0.5}{100}\dotfill &0.005\\ t=years\dotfill &3 \end{cases} \\\\\\ I = (17525)(0.005)(3) \implies I \approx 262.88[/tex]

There is a 21.19% chance that the daily production falls within 32.3 and 36.9 liters.

To find the probability that the daily production of a herd of cows is between 32.3 and 36.9 liters, we need to use the normal distribution properties.

Given that the mean daily production of the herd of cows is 30 liters and the standard deviation is 8.2 liters, we can standardize the distribution and use the standard normal distribution table or calculator. We calculate the z-scores for the values 32.3 and 36.9, which tells us how many standard deviations away from the mean each value is.

Using a standard normal cumulative distribution function, we can find that the probability of the daily production falling between 32.3 and 36.9 liters is approximately 0.2119. This means that there is a 21.19% chance that the daily production falls within this range.

Learn more about standard deviation:

https://brainly.com/question/23907081

#SPJ4

The probability that daily production is between 32.3 and 36.9 liters is 0.18949 or 18.9%.

To determine the probability that the herd's daily production will be between 32.3 and 36.9 liters, we must compute the z-scores for each number and use a standard normal distribution table to calculate the area under the curve between those z-scores.

To find out the z - scores we need use z-score formula:

Z = X−μ / σ

where μ  is the mean, σ is the standard deviation and X is the observed value. In the problem μ  is 30 liters, X₁ = 32.3 liters & X₂ = 36.9 liters and σ = 8.2 liters.

Substituting the values in the equation to find the z-score for 32.3 liters is:

z₁ = (32.3 - 30) / 8.2 = 0.2804

z₁ = 0.28049

Substituting the values in the equation to find the z-score for 36.9 liters is:

z₂ =( 36.9 - 30) / 8.2 =  0.8414

z₂ = 0.8414

We can determine the area under the curve between these two z-scores using a conventional normal distribution table. The area between z = 0.28049 and z = 0.8414 and the probability is approximately 0.1894.

As a result, the probability that the herd's daily output is between 32.3 and 36.9 liters is about 0.1894.

Learn more about Standard Normal Distribution Table:

https://brainly.com/question/30404390

#SPJ4

The value of the side length PR using Trigonometric ratio is: PR = 3/√2

The primary trigonometric ratios are:

sin x = opposite/hypotenuse

cos x = adjacent/hypotenuse

tan x = opposite/adjacent

Thus:

We are given that:

∠Q = 90°

∠R = 45°

PQ = 3

Thus:

PR is calculated as:

3/PR = sin 45

PR = 3 * sin 45

PR = 3 * 1/√2

PR = 3/√2

Read more about Trigonometric Ratios at: https://brainly.com/question/13276558

#SPJ1

Answer:

Therefore, Kiran swam approximately 0.189z laps in the pool.

Step-by-step explanation:

Let's assume the number of laps Kiran swims to be "x".

From the given information, we know that Clare swims 95 times as many laps as Kiran. Therefore, we can write an equation:

18 = 95x

To solve for x, we can isolate it by dividing both sides of the equation by 95:

x = 18/95

x = 0.189

The volume of the pyramid is approximately 574,533.33 cubic meters.

To find the volume of a pyramid, you use the formula: V = (1/3) × base area × height, where B is the area of the base and h is the height of the pyramid.

Given that the side length of the square base is 140 m and the height is 91 m.

Since the base of the pyramid is a square with a side length of 140 m, we can find its area by multiplying the side lengths: B = 140m x 140m = 19,600 square meters.
By calculating this expression, you'll find the volume of the pyramid.

Now we can plug in the values for B and h into the formula: V = (1/3)(19,600 square meters)(91 meters) = 574,533.33 cubic meters.

To learn more about volume visit;

brainly.com/question/16788902

#SPJ11

Answer:

We are given the following recursive formula:

an = -2an-1

We are also given that a1 = 5. Using the recursive formula, we can find the values of a2, a3, and a4 as follows:

a2 = -2a1 = -2(5) = -10

a3 = -2a2 = -2(-10) = 20

a4 = -2a3 = -2(20) = -40

Therefore, the value of a4 is -40.

Answer:

3600

Step-by-step explanation:

So you find the area of a rhombic prism by multiplying the sides together and dividing by 2, so 15*20*24 would be 7200, and that divided by 2 is equivalent to the final answer, which is 3600.

We are 95% confident that the proportion of all central Florida reefers who use LED lighting falls between .648 and .752.

The correct practical interpretation is: "We are 95% confident that the proportion of all central Florida reefers who use led lighting falls between .648 and .752."

This means that if we were to take multiple random samples of 700 experienced central Florida reefers, 95% of the intervals created would contain the true population proportion of reefers who use LED lighting.

So, based on this sample, we can say with 95% confidence that the true proportion of all central Florida reefers who use LED lighting is somewhere between .648 and .752.

For similar question on proportion.

https://brainly.com/question/16869517

#SPJ11

We are 95% confident that the proportion of all central Florida reefers who use LED lighting falls between .648 and .752 from mean.

The correct practical interpretation is: "We are 95% confident that the proportion of all central Florida reefers who use LED lighting falls between .648 and .752." This means that based on the sample of 700 experienced reefers, we can estimate with 95% confidence that the true proportion of all reefers in central Florida who use LED lighting is likely to be between .648 and .752.

This confidence interval was constructed using sampling techniques, and in repeated sampling, 95% of the intervals created would contain the population mean.
We are 95% confident that the proportion of all central Florida reefers who use LED lighting falls between .648 and .752.

Learn more about mean here:

https://brainly.com/question/31101410

#SPJ11

The possible coordinates of point A are (-2, -2) and (-2, 4).

Distance is a numerical measurement of the amount of space between two points. It is the length of a path that connects two points in a space, usually measured in units such as meters, kilometers, miles, etc.

In Euclidean space (a type of space

We can use the distance formula to find the possible coordinates of point A. The distance formula between two points (x1, y1) and (x2, y2) is:

d = √((x2 - x1)² + (y2 - y1)²)

Let the coordinates of point A be (x, y), where x = -2 (the x-coordinate of point A is -2, as given in the problem).

Then, we can write the distance formula as:

5 = √((2 - (-2))²+ (1 - y)²)

Simplifying this equation, we get:

25 = (2 - (-2))²+ (1 - y)²

25 = 16 + (1 - y)²

9 = (1 - y)²

Taking the square root of both sides, we get:

3 = 1 - y or 3 = -(1 - y)

Solving for y in each case, we get:

y = -2 or y = 4

Therefore, the possible coordinates of point A are (-2, -2) and (-2, 4).

To know more about distance visit:

https://brainly.com/question/26550516

#SPJ1

The method regarding to the sampling to pick the 200 sales representatives is to be make 20 groups of 10.

Sampling is the process of selecting a subset of individuals from a population to represent the whole. It is a technique used in research to gather data from a larger population. The goal of sampling is to reduce the cost, time, and effort required to collect data from a large population. Sampling allows researchers to get a better understanding of the population by being able to study a smaller, more representative group of individuals. Sampling also allows researchers to make more accurate generalizations about a population.

In this case, the best way for the sales directors to including  200 sales representatives, with equal Numbers from each region is simply to make 20 groups of 10.

Learn more about sampling on:
brainly.com/question/17831271
#SPJ1

Complete questions as follows-
Suppose there are 1,000 total sales representatives in the Midwest and Northeast regions, with 500 sales reps in each
region. Describe the best way for the sales director to include 200 sales representatives, with an equal number from each
region and an equal number in each group, while yielding valid conclusions in the study.
Type your response in the box.

Since we know that the distance between the origin and A' should be d, which is 7/3 times the distance between the origin and A.

Therefore, the correct answer is D.

What is Pentagon?

A pentagon is a geometric shape that has five sides and five angles. It is a two-dimensional polygon, which means it is a flat shape with straight sides.

To find the coordinates of the dilated pentagon A'B'C'D'E', we need to multiply the coordinates of each vertex of pentagon ABCDE by the scale factor. Since the origin is the center of dilation, we can use the formula:

(x', y') = k(x, y)

where (x, y) are the original coordinates of a vertex, k is the scale factor, and (x', y') are the new coordinates of the corresponding vertex.

To find the scale factor, we can use the distance formula to find the distance between the origin and any one of the vertices. Let's use vertex A for convenience:

Distance OA = sqrt((-1-0)² + (1-0)²) = sqrt(2)

Distance OA' = k * Distance OA

We want to find the scale factor that will result in a dilation centered at the origin, so we want OA' to be the desired distance between the origin and A'. Let's say that distance is d. Then:

d = k * sqrt(2)

Solving for k, we get:

k = d / sqrt(2)

We are not given the desired distance between the origin and A', so we cannot determine the exact value of k. However, we can still determine which answer choice represents the correct dilation.

Let's try answer choice A:

(x', y') = (3/7x, 3/7y)

This represents a dilation with a scale factor of 3/7. But we already know that the scale factor should be d / sqrt(2). Since d could be any value, we cannot say for sure whether 3/7 is the correct scale factor.

Answer choice B:

(x', y') = (x + 3/7, y + 3/7)

This represents a translation, not a dilation. Therefore, it cannot be the correct answer.

Answer choice C:

(x', y') = (x + 7/3, y + 7/3)

This represents a dilation with a scale factor of 1. This is not the correct scale factor, since we know that the distance between the origin and A' should be greater than the distance between the origin and A.

Answer choice D:

(x', y') = (7/3x, 7/3y)

This represents a dilation with a scale factor of 7/3. This is the correct scale factor, since we know that the distance between the origin and A' should be d, which is 7/3 times the distance between the origin and A.

Therefore, the correct answer is D.

To learn more about Pentagon from the given link:

https://brainly.com/question/17054992

#SPJ1

The required sample size is  8.90400.

Given a student wants to make a guess within 0.03 of the true ratio with a 90% confidence level.

Margin of Error, E = 0.03

significance level α=0.10  {90% confidence}

A given estimate of the percentage of population p is p = 0.79.

The critical value for the significance level α = 0.10 is Zc = 1.645. This can be determined using either Excel or a normal probability table.

Use the following formula to calculate the minimum sample size required to estimate the percentage of population p within the required margin of error.

n≥p(1-p)(Zc÷E)²

n = 0.796×(1-0.796)(1.645÷0.03)²

n = 0.796 x 0.204 x 54.833

n = 8.90400

Therefore, the resample size required to meet the condition is n ≥  8.90400 and must be an integer. From this, we conclude that the minimum sample size required is n =  8.90400

Lear more about confidence level here :-

https://brainly.com/question/22851322

#SPJ4

An inequality for this situation "A cruise ship can carry at most 3500 passengers." is x ≤ 3,500.

A graph of the inequality x ≤ 3,500 is shown in the image attached below.

What is an inequality?

In Mathematics and Geometry, an inequality simply refers to a mathematical relation that is typically used for comparing two (2) or more numerical data and variables in an algebraic equation based on any of the inequality symbols;

Note: At most simply refers to less than or equal to (≤) in Mathematics.

Since the cruise ship can only carry at most 3500 passengers, an inequality that models this situation is given by;

x ≤ 3,500

Read more on inequality here: brainly.com/question/19732652

#SPJ1

A horizontal line that a function's graph appears to coincide with but does not actually do so is said to be its horizontal asymptote.

What is a function?

A relation between a collection of inputs and outputs is known as a function. A function is, to put it simply, a relationship between inputs in which each input is connected to precisely one output.

A horizontal line that a function's graph appears to coincide with but does not actually do so is said to be its horizontal asymptote. The end behaviour of the function is determined using the horizontal asymptote.

Hence, this is what is known as horizontal asymptote.

Learn more about function from the given link

https://brainly.com/question/11624077

#SPJ1

The failure strength of a beam can be represented by a normal distribution where the population standard deviation is 4 psi, we get a test measure of 7. Subsequently, we would require a test of at slightest  7 pillars to attain a 95% certainty interim with a width of 3 psi...

To discover the test measure required to realize a 95% certainty interim with a width of 3 psi, we ought to utilize the equation:

n = [ (z*σ) / E ][tex]^{2}[/tex]

where:

n is the test measure

z is the z-score related to the specified level of certainty (in this case, 95% compares to a z-score of 1.96)

σ is the populace standard deviation

E is the specified edge of blunder (in this case, 3 psi)

n = [ (1.96 * 4) / 3 ][tex]^{2}[/tex]

n = [ 2.61 ][tex]^{2}[/tex]

n = 6.82

we get a test measure of 7. Subsequently, we would require a test of at slightest 7 pillars to attain a 95% certainty interim with a width of 3 psi.

To learn about standard deviation visit:

https://brainly.com/question/29088233

#SPJ4

Answer:

Rhombus

Step-by-step explanation:

This would be a rhombus.

In a rhombus, all sides are equal and opposite sides are parallel.

A statistical test conducted to determine whether to reject or not reject a hypothesized probability distribution for a population is known as the goodness of fit test.

Option C is the correct answer.

We have,

A goodness of fit test is conducted to determine whether a hypothesized probability distribution for a population adequately fits or matches the observed data.

It compares the observed data to the expected distribution specified by the hypothesis and assesses whether there is sufficient evidence to reject the hypothesis.

This test is commonly used when testing the fit of categorical data to a specified distribution, such as testing whether the observed data follows a specific discrete probability distribution

(e.g., Poisson, binomial, multinomial) or whether the observed data matches the expected proportions in different categories.

The goodness of fit test evaluates the degree of discrepancy between the observed and expected frequencies or proportions and provides a statistical measure, such as the chi-squared test statistic, to assess the level of agreement or disagreement between the observed data and the hypothesized distribution.

Therefore,

A statistical test conducted to determine whether to reject or not reject a hypothesized probability distribution for a population is known

the goodness of fit test.

Learn more about the goodness of fit test here:

https://brainly.com/question/32668212

#SPJ12

According to the algebraic expressions, the sum of four smaller rectangles is 96.

First, let's consider the figure as one large rectangle. To find the area of a rectangle, we multiply its length by its width. In this case, the length of the rectangle is 8 and the width is 6 + 2 + 4 = 12. Therefore, the expression for the area of the rectangle can be written as:

Area = length x width

Area = 8 x 12

Area = 96

So the area of the figure as one large rectangle is 96 square units.

To find the area of each rectangle, we'll use the formula for the area of a rectangle, which is length x width. We can see from the figure that:

Rectangle A has a length of 8 and a width of 6

Rectangle B has a length of 8 and a width of 2

Rectangle C has a length of 4 and a width of 6

Rectangle D has a length of 4 and a width of 2

Therefore, the expressions for the area of each rectangle can be written as:

Area_A = length x width

Area_A = 8 x 6

Area_A = 48

Area_B = length x width

Area_B = 8 x 2

Area_B = 16

Area_C = length x width

Area_C = 4 x 6

Area_C = 24

Area_D = length x width

Area_D = 4 x 2

Area_D = 8

To find the total area of the figure, we simply add up the areas of the four rectangles. Therefore, the expression for the area of the figure as a sum of four smaller rectangles can be written as:

Area = Area_A + Area_B + Area_C + Area_D

Area = 48 + 16 + 24 + 8

Area = 96

To know more about expression here

https://brainly.com/question/14083225

#SPJ4

Answer:

The answer is 28

Step-by-step explanation:

sin0=opp/hyp

let hyp be x

sin30=14/x

0.5x=14

divide both sides by 0.6

x=14/0.5

x=28

The description of the polyomial roller coaster project is shown below

Proposal for the "Imaginary Rush" Roller Coaster:

The polynomial's graph is attached

Description of how client specifications are met:

Interpretation of the practicality of the design:

The design of Imaginary Rush is both exciting and practical. The coaster meets all the client's specifications while also providing a thrilling ride for coaster enthusiasts.

The dips and peaks of the coaster follow the behavior of the polynomial, providing a unique experience for riders.

The use of the imaginary root adds an additional level of excitement to the ride, making it stand out from other roller coasters.

Overall, the design of Imaginary Rush is both fun and practical, making it an excellent addition to any theme park.

Discussion of the polynomial's behaviors:

Read more about polynomial at

https://brainly.com/question/7693326

#SPJ1

Answer:

if they are similiar then a is 4.9

b is 2.8 and c is 4.1

Step-by-step explanation:

if the the shapes are similiar then match up then sides of the shape and they should have equal lengths.

hope this helps :)

The value of 5 pints is equal to 10 cups.

A liquid measurement with a capacity of 1/8 of a gallon.  If we recall, 8 ounces equals 1 cup and 2 cups (or 16 ounces) equals 1 pint. One pint is made up of 16 fluid ounces, which is also equivalent to 2 cups, 1/4 quart, and 1/8 gallon. Normally, there are 2 cups in 1 pint, however this might vary depending on the ingredients. A pint has two cups in it.

Two cups equal one pint. You must multiply the volume in pints by a factor of two to convert from pt to c.

Hence, 1 pt = 2c

Substitute the values;

Multiple both the sides by 5

5 * 1pt = 5* 2c

5pt = 10c

Therefore, The value of 5 pints is equal to 10 cups.

To know more about pints check the below link:

https://brainly.com/question/26941359

#SPJ9

Answer:

the mean absolute deviation for the given data set is 1.86.

Step-by-step explanation:

To find the mean absolute deviation, we first need to find the mean of the data set.

Mean = (1.25 + 3.50 + 2.55 + 8.20 + 4.80 + 0.30 + 0.75 + 2.25) / 8 = 3.07

Next, we find the absolute deviation of each data point from the mean by subtracting the mean from each data point and taking the absolute value:

|1.25 - 3.07| = 1.82

|3.50 - 3.07| = 0.43

|2.55 - 3.07| = 0.52

|8.20 - 3.07| = 5.13

|4.80 - 3.07| = 1.73

|0.30 - 3.07| = 2.77

|0.75 - 3.07| = 2.32

|2.25 - 3.07| = 0.82

Then, we find the mean of these absolute deviations:

Mean absolute deviation = (1.82 + 0.43 + 0.52 + 5.13 + 1.73 + 2.77 + 2.32 + 0.82) / 8

Mean absolute deviation = 1.86

Therefore, the mean absolute deviation for the given data set is 1.86.

The appropriate statement for the null hypothesis is "the depression status and caffeinated coffee consumptions are independent."

The statement that is not appropriate for the null hypothesis according to hypothesis testing is "the levels of depression status and caffeinated coffee consumptions are equally likely."

This statement implies that there is an equal chance of having different levels of depression status and different levels of caffeinated coffee consumption, which is not a suitable assumption for the null hypothesis.

The null hypothesis should state that there is no significant relationship between the two variables, and the distribution of one variable does not depend on the distribution of the other variable.

Therefore, the appropriate statement for the null hypothesis is "the depression status and caffeinated coffee consumptions are independent."

Learn more about hypothesis testing

brainly.com/question/30588452

#SPJ11

Answer:

y = 1/2x - 4

Step-by-step explanation:

The y-intercept is at -4 (counting by ones).

The slope would be 1/2, going up one time and to the right twice, plotting the point (2, -3).

If 2 angles are complementary, then they add up to 90 degrees. Therefore, you can find the measure of the complementary angle by subtracting 12 from 90, which is 78 degrees.

Answer:

y = -4.3x + 23.8

Step-by-step explanation:

To find the equation for g(x), we need to first understand what it means for g(x) to be parallel to f(x). Two lines are parallel if they have the same slope, but different y-intercepts. The slope of f(x) is -4 3/10, which can be written as -43/10 in fraction form and -4.3 in decimal form. Therefore, the slope of g(x) is also -4.3.

Now we need to use the fact that g(x) passes through the point (6, -2) to find its y-intercept. We can use the point-slope form of a linear equation to do this: y - y1 = m(x - x1), where m is the slope and (x1, y1) is a point on the line.

Plugging in our values, we get:

y - (-2) = (-4.3)(x - 6)

Simplify the left side

y + 2 = (-4.3)(x - 6)

Next, simplify the right side

y + 2 = -4.3x + 25.8

Subtracting 2 from both sides, we get:

y = -4.3x + 23.8

Therefore, the equation for g(x) is y = -4.3x + 23.8 in simplified slope-intercept form.

Answer: your right its 0,1

Step-by-step explanation:

Since angle AOB and angle COD are vertical angles, they are congruent. Since angle AOB is a central angle of the first circle, it intercepts arc AB.

what is congruent ?

Congruent is a term used in geometry to describe figures or objects that have the same shape and size. When two figures are congruent, they are identical in every way, including their angles, sides, and dimensions

In the given question,

Proof:

1) Since angle AOB and angle COD are vertical angles, they are congruent.

2) Since angle AOB is a central angle of the first circle, it intercepts arc AB.

3) Similarly, angle COD is a central angle of the second circle, and it intercepts arc CD.

4) Using the fact that central angles of a circle intercept arcs of the same measure, we have that arc AB and arc CD have the same measure, since they are intercepted by congruent central angles.

Therefore, arc AB = arc CD, as required.

To know more about congruent. , visit:

https://brainly.com/question/12413243

#SPJ1

Answer:

x ≈ 39.5°

Step-by-step explanation:

using the cosine ratio in the right triangle

cos x = [tex]\frac{adjacent}{hypotenuse}[/tex] = [tex]\frac{OP}{NP}[/tex] = [tex]\frac{64}{83}[/tex] , then

x = [tex]cos^{-1}[/tex] ( [tex]\frac{64}{83}[/tex] ) ≈ 39.5° ( to the nearest tenth )