Answer:
42J
Explanation:
Given parameters:
Force applied = 6N
Distance moved = 7m
Unknown:
Amount of energy gained by the block = ?
Solution:
The amount of energy gained by the block is the same as the work done on the block.
The work done is the force applied to move the block through a distance;
Energy gained = force x distance = 6 x 7 = 42J
At what point in this sequence of events is potential energy
being converted to kinetic energy?
A. When the spring is recoiling B. When the spring is fully stretched. C. When the spring is fully recoiled. D. When the spring is stretching
Answer:
your answer is C
Explanation:
the spring when fully recoiled is at maximum PE and will then convert to KE
A layer of water Δx m thick which lies x m above the bottom of the tank will be rectangular with length 8 m. Using similar triangles, we can see that it will have widt of_____m
Answer:
x
Explanation:
The question relates to the energy required to pump water out of the
spout at the top of the triangular prism tank.
The width of the layer of water Δx thick is x m.
Reasons:
The location of the layer Δx m thick = x meters above the bottom
The length of the triangular (cross-section) prism tank = 8 meters
The length of the layer Δx thick layer = 8 meters
From the attached drawing of the cross-section of the tank, we have;
The height of the triangular tank cross-section = 3 meters
The length of the base of the triangular cross-section = 3 meters
By similar triangles, we have;
[tex]\dfrac{Height \ of \ Tank}{Base \ length \ of \ tank}= \dfrac{Height \ of \ layer \ with \ thickness \ \Delta x }{Width \ of \ layer \ with \ thickness \ \Delta x}[/tex]
Which gives;
[tex]\dfrac{3}{3} =\dfrac{x}{Required \ width}[/tex]
[tex]\dfrac{3}{3} =1 = \dfrac{x}{Required \ width}[/tex]
Required width × 1 = x
The required width = x m
Learn more here:
https://brainly.com/question/8830987
https://brainly.com/question/15695639
https://brainly.com/question/13507755
The inheritance of genetic traits from parents to children follows predictable rules. Knowing that each parent contributes genes equally to each child, what determines an inherited trait such as eye color? a.Only the interaction between dominant genes. Only the interaction between dominant genes. b.Only the interaction between recessive genes. Only the interaction between recessive genes. c.The interaction between dominant and recessive genes. d.The interaction between dominant and recessive genes. The interaction between dominant and recessive genes does not determine inherited traits. The interaction between dominant and recessive genes does not determine inherited traits.
Answer:
EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE
Explanation:
You work at a retail store. Recently, paychecks have had errors and there have been many employee complaints. You have been assigned to head the team to redesign the payroll software program to solve this problem. Use the drop-down menu to organize the steps you will take in writing the problem statement. Write the new payroll software program. Clearly state the vision of how the stakeholders think things will function with the new payroll system. Ask for stakeholder input on the problem and possible solutions?1.C 2.B 3.A
Answer:
C,B,A
Explanation:
Answer:
first one C
second one B
third one A
Explanation:
i hope you have a good day ;0
0.0135 kg of steam at 100°C is
cooled, which turns it into water at
50.0°C. How much heat has been
removed? (Remember, it has to
change phase before cooling
down.)
Boil Pt (°C)
Material Melt Pt (°C) 4 0/kg)
Water
0
3.33.105
L(/kg) c (J/(kg*C))
2.26.106 4186
100
(Unit = J)
Answer:
33333.35 kg
Explanation:
I got it right on Acellus, rounded to 33300 sigfigs
When 0.0135 kg of steam at 100°C is cooled, turns it into water at 50.0°C. Then 33,342.45 J of heat has been removed.
What is latent heat?Latent heat is the heat absorbed or released by a substance during a change in its physical state without a corresponding change in temperature. This means that the heat energy is being used to break or form intermolecular bonds between the particles in the substance, rather than raising or lowering the temperature. Examples of processes that involve latent heat include melting, freezing, vaporization, and condensation. The amount of heat required or released during these phase transitions is dependent on the substance and the amount of material undergoing the change.
Here in the question,
To solve this problem, we need to use the formula for the heat required to change the phase of a substance, which is given by:
Q = m * L
where Q is the heat required, m is the mass of the substance, and L is the specific latent heat of the substance.
In this case, we need to find the heat required to change 0.0135 kg of steam at 100°C to water at 100°C, and then cool it down to 50°C.
First, we need to find the heat required to change the phase of the steam to water at 100°C. Using the table given, we can see that the specific latent heat of vaporization for water is 2.26 × 10^6 J/kg. So the heat required to change 0.0135 kg of steam to water at 100°C is:
Q1 = m * L = 0.0135 kg * 2.26 × 10^6 J/kg = 30,510 J
Next, we need to find the heat required to cool the water from 100°C to 50°C. Using the specific heat capacity of water, which is 4186 J/(kg°C), we can calculate the heat required as:
Q2 = m * c * ΔT = 0.0135 kg * 4186 J/(kg°C) * (100°C - 50°C) = 2832.45 J
The total heat removed is the sum of the heat required to change the phase of the steam and the heat required to cool the water:
Q = Q1 + Q2 = 30,510 J + 2832.45 J = 33,342.45 J =33.34245 kJ.
Therefore, 33,342.45 J of heat has been removed.
To learn about specific heat click:
https://brainly.com/question/11297584
#SPJ2
help ;-;
Replace the pencil with an iron nail (Doc.19 in pic)
1. does the lamp glow?
2. does an electric current flow through the lamp?
3. Does the iron nail conduct the electric current?
Answer:
all qn 1,2,3 have same answer ,. Yes,. hope it helps
Explain the Difference between genetic diversity and ecosystem diversity?
Answer:
1. Genetic diversity are the differences in DNA among individuals within a species or population while ecosystem diversity is the number or variety of ecosystems within a particular area.
2. Genetic diversity is the genetic material of microorganisms, plants and animals contains information that determines the characteristics of all species and individuals that make up the diversity of the living world while the ecosystem diversity is the enormous range of terrestrial and aquatic environments on earth has been classified into a number of ecosystems.
HELPPPPPPP!!!!!
why are cations drawn towards cathode and anions towards anode?
Explanation:
Cations are positive and anions are negative, since opposite charged attract, the cations are drawn towards the cathode, which is the negatively charged electrode and anions are drawn towards the anode (positive electrode)
Answer:
because cations are negatively charged particles and their attracted towards a positive electrode that is anode while anions and positively charged particles and I attracted towards the negative electrode that is cathode
Explanation:
1. If a rock is dropped from a 600 meter cliff, how long will it take to hit the ground?
Dl
Answer:
11.1s
Explanation:
Given parameters:
Height of cliff = 600m
Unknown:
How long it takes to hit the ground = ?
Solution:
To solve this problem, we use one of the kinematics equation;
H = ut + [tex]\frac{1}{2}[/tex]gt²
H is the height
u is the initial velocity = 0m/s
t is the time taken
g is the acceleration due to gravity
600 = [tex]\frac{1}{2}[/tex] x 9.8 x t²
600 = 4.9t²
t² = 122.5
t = 11.1s
If a train conductor is describing the speed of the train as well as the direction of the train is going to then the train conductor said to be described with the trains
Answer:
With all of that information, he's telling us the train's VELOCITY.
Explanation:
Velocity is a vector quantity made of two parts: speed and direction.
C) If your displacement is 19.3m and your final position is 31.8m, what was your initial position?
Answer:12.5
Explanation: Subtract
Calculate the resistance of an electric blanket that draws 9 A to transform 50 W of energy.
Answer:
The resistance is 0.617Ω.
Explanation:
Given that the formulas are V = I × R and P = I × V so when you substitute the V formula into P formula, you will get P = I² × R. Using this formula, you can find the resistance :
P = I² × R
50 = 9² × R
50 = 81 R
50 ÷ 81 = R
R = 0.617Ω (3sf)
Show the steps im confused.
The answer is 14 m/s
Answer:
14 m/s
Explanation:
KE=1/2mv^2
5880J= 1/2(60kg)v^2
5880J=(30)(V^2)
5880/30=V^2
196=v^2
square root of 196 is 14
What are two main types of exercise???
Answer:
Endurance exercise and Strength exercise
Explanation:
Answer:
Aerob exercise and strength exercise
Explanation:
A force of 6.0 N is applied horizontally to a 3.0 kg crate initially at rest on a horizontal frictionless surface. After the crate is pushed for 1.5 seconds, it has a velocity of 3.0 m/s. Does this support Newton's second law of motion, that force equals mass times acceleration? Explain. 
a. Yes, because the acceleration of the crate is 2.0 m/s².
b. No, because the acceleration of the crate is 2.0 m/s².
c. Yes, because the mass and the velocity of the crate are equal.
d. No, because the mass and the velocity of the crate are equal.
Answer:
a. Yes, because the acceleration of the crate is 2.0 m/s².
Explanation:
Given
[tex]Force = 6N[/tex] --- f
[tex]Mass = 3kg[/tex] --- m
[tex]Time = 1.5s[/tex] --- t
[tex]Velocity = 3.0m/s[/tex] --- v
Required
Does the system support [tex]F=ma[/tex]
Yes, it does and this is shown below
The crate is initially at rest; so:
[tex]u = 0[/tex]
Using the first equation of motion
[tex]v = u + at[/tex]
Substitute values for v, u and t
[tex]3 = 0 + a*1.5[/tex]
[tex]3 = 1.5a[/tex]
Make a the subject
[tex]a = 3/1.5[/tex]
[tex]a = 2[/tex]
Using [tex]F = ma[/tex]
Substitute values for F and m
[tex]6 = 3 * a[/tex]
Divide both sides by 3
[tex]6/3 = 3/3 * a[/tex]
[tex]2 = a[/tex]
[tex]a = 2[/tex]
In both cases:
[tex]a = 2[/tex]
Hence, option (a) is correct.
I need help with this asap please!!
Answer:
9000Ns
Explanation:
Given parameters:
Mass of sled = 100kg
Net force = 150N
Time = 1min = 60s
Unknown:
Total impulse = ?
Solution:
The total impulse on the body can be derived using the expression below;
Impulse = Force x time
So;
Impulse = 150 x 60 = 9000Ns
The primary job of a(n) ____
is to increase the power of a modified radio wave.
The primary job of a(n) ____
is to increase the power of a modified radio wave.
Answer:
amplifierExplanation:
Hope it helps:)
#CarryOnLearning
Answer: Amplifier
Explanation: Edge 2021
Have a great day :D
Is gravitational energy a form of kinetic energy or potential energy? Why do you think that?
Please help due today!!
Answer:
When something is lifted, work is done on the object against the pull of gravity. This work is converted to a form of potential energy called gravitational potential energy. When the item falls towards Earth like an apple from a tree, gravitational potential energy is converted into kinetic energy.
Refer to your Expeditions in Reading book for a complete version of this text.
Based on “Solar Power for Public Buildings,” which answer best states the author’s position on the use of solar power in California?
A The use of solar energy will double the pollution produced in California.
B The state’s tap water will be purer if processed in solar-powered plants.
C Increasing the use of solar power will positively impact the environment.
D Solar panels remove most of the toxic chemicals found in the atmosphere.
Answer:
d
Explanation:
Answer:
D. Solar panels remove most of the toxic chemicals found in the atmosphere.
People do not believe it is possible to use the sun's energy to create electricity.
Explanation:
I did the test.
PLEASE HELP BRANILIEST
The earliest goalie masks used were made from______________________.
Group of answer choices
Stone
Candy
Fiberglass
Wood
Answer:
The earliest goalie masks used were made from Fiberglass.
Explanation:
Hope that helps
Have a good day
Why do you think spacecraft that carry instruments to collect data about objects in space are called probes?
Answer:
my mind cant comprehend a shing word u just said
Explanation:
The probes collect data, they capture the movement in space, therefore, spacecraft that carry instruments to collect data about objects in space are called probes, So the given statement is correct.
What are Probes?
Any conductor that is placed into a plasma and gathers current is a probe. Measurements of the current on the probe as a function of the bias potential given to the probe can be used to identify a plasma's properties.
Such probes affect their surroundings while directly detecting electron and ion flows in the plasma. Any conductive material (wire, foil, chamber walls, etc.) can serve as a plasma probe; nevertheless, precise control over the probe's size, shape, and substance is necessary to achieve detectable plasma levels. Astronauts are not present aboard probes. Scientists can analyze the data the probes relay back to Earth. Sputnik 1 was the first spacecraft to launch.
Because probes probably collect data, they capture the movement in space, therefore, spacecraft that carry instruments to collect data about objects in space are called probes.
To know more about probes:
https://brainly.com/question/12992890
#SPJ2
what's is the kinetic energy of a .235-kg baseball thrown at 50.0m/s
Answer:
34.51
Explanation:
k=1/2mv² is the kenetic energy equation to fill is in
k=[1/2(0.235)×50]²
I WILL GIVE BRAINLIEST
How could you explain that two objects of the same volume have different buoyancy in water???
HELP ITS URGENT
Answer:
Explanation:
Take for example you place two eggs in the water. One starts to sink and one remains floating. They have the same volume but the one that sinks is cracked just a little, which as soon as it hits the water, water starts to go in the egg. Then that changes the volume of the egg. (I've done this expirement before) It can also be the way you place the object in the water, or one object has been in the water longer. The buoyancy can be the way they are positioned/placed in the water. One may be more absorbant to the water as well.
I hope you understand what I am trying to say.
HELP PLS 100 POINTS TAKING TEST RN
Suppose you are in a car that is going around a curve. The speedometer reads a constant 30
miles per hour. Which of the following is NOT true?
You and the car are accelerating.
Your speed is constant.
Your velocity is constant.
Your acceleration is constant.
Answer:
sorry I hate when people press your question and answer with a fake answer for points, however you said it was 100 points and it's not even close lol but it is "your speed Is constant" that is not true
The total amount of carbon dioxide in the atmosphere is estimated to have decreased by 10 to 15 percent since 1900.
True False
Answer: False
Explanation:
Plss help with my science
Answer:
rotates, axis,not sure,day, not sure, night, revolves, not sure, hemisphere, towards, summer, away, winter
Explanation:
Which situations will NOT increase the reactions rate of most chemical reactions?
A) an increase in temperature
B) grind up the solute to increase surface area before mixing
C) by increasing the pressure in which the reaction takes place
D) decreasing the concentrations of the substances in the reaction
Answer:
D
Explanation:
Increasing temperature or pressure some times make the condition favorable to the reaction. Similarly increasing surface area of reacting mixture also helps to increase the reaction rate.
What is reaction rate ?The rate of a reaction is the rate of decrease in concentration of reactant or the rate of increase in concentration of the products. The rate of a reaction depends on several factors such as temperature, pressure, surface area etc.
Fir an endothermic reaction, as the temperature increases, reaction rate increases. Similarly, as the pressure increases, the reaction in which the number of moles of gaseous reactants is higher than that in products, rate increases.
The concentration of reactants must be sufficient for the reaction and decreasing the concentration of reactants does not favor an increase in reaction rate. Hence, option D is correct.
Find more on reaction rate :
https://brainly.com/question/8592296
#SPJ2
What are some of the similar features of position vs time and velocity vs time
help me!
Bill left a hammer out in the rain all day. The next morning it had rust on it.
Oxygen and a metal chemically combine to form rust. What is rust an example of?
O a mixture
• a solution
an element
a compound
Answer:D.Compound
Explanation: internet
please help! easy science! second pic is the question and possible answers (A B C or D) its one question! brainliest promised!
Answer:
Please do not take my word for this at all, but this is what I found, "When the pendulum swings back down, the potential energy is converted back into kinetic energy. At all times, the sum of potential and kinetic energy is constant." So I think the answer is B also you are anime fan too lol :DD I love hinata
Explanation: