Answer:
Yes, at 20 °C the tank was filled to full capacity
Explanation:
Given;
let initial pressure, P₁ = 2.37 atm
let initial volume, V₁ = 1860 L
let final pressure, P₂ = 220 bar = 217.123 atm
let final volume, V₂ = ?
Subject the air volume (1860 L ) at 2.37 atm to the tank rating (220 bar)
Ideal law is given by;
PV = nRT
At a fixed mole and gas temperature, the equation becomes;
P₁V₁ = P₂V₂
V₂ = (P₁V₁) / P₂
V₂ = (2.37 x 1860) / 217.123
V₂ = 20.3 L
After subjecting the air volume to tank rating, the volume of the air at 220 bar is 20.3 L which is greater than tank volume (18 L).
The extra 2.3 L can be assumed to be compressed gas volume due to the given (lower) temperature.
Thus, at 20 °C the tank was filled to full capacity.
The table shows the conditions during two trials of a reaction.
Answer:
The correct option is;
The reaction pathway for the trials is different
Explanation:
The effect of a catalyst in a chemical reaction is to increase the rate of a reaction by changing the pathway or mechanism of the reaction and/or to lower the transition state's energy thereby lowering the activation energy of the reaction
The pathway of the reaction is changed by the catalyst by the formation of intermediate compounds by the catalyst which require lower activation energy to form the products than the original non-catalyzed reactants. In the process the catalyst is regenerated, thereby, not taking part in the reaction.
What are chemical changes of matter?
Answer:
Chemical Changes are also called Chemical Reactions. Chemical reactions involve combining different substances. The chemical reaction produces a new substance with new and different physical and chemical properties. Matter is never destroyed or created in chemical reactions.
Explanation:
Explain this
When a small piece of glowing sodium is placed inside a gas jar filled with chlorine gas, the sodium continues to burn brightly but when the gas is replaced by argon gas, the glowing sodium becomes extinguished.
Answer:
Because Argon is a inert gas
Explanation:
Inert gases don't take place in any experiments
Answer:
Below.
Explanation:
The sodium reacts strongly with the chlorine to form NaCl and the heat of reaction continues the brightness, whereas it does not react with the inert gas argon and soon cools down.
Which of the following is a halogen?
O A. Neon (Ne)
B. Iodine (1)
O C. Oxygen (0)
O D. Potassium (K)
Answer:
[tex]\boxed{\mathrm{Iodine}}[/tex]
Explanation:
Halogens are elements in group 17 or 7 in the periodic table.
Iodine is a halogen.
Therefore, iodine, an Halogen
Learn more at: https://brainly.com/question/15852546?referrer=searchResults
sodium react gently with water ture or false
false,
sodium has a vigorous reaction with water.
This can be observed by putting a piece of sodium in water,
it moves swiftly across the surface of water and reacts violently.
An ionic bond is the attraction between _____.
Answer:
oppositely charged ions in a chemical compound
Explanation:
Answer:
Between ions
Explanation:
Research on ‘where a person’s carbon emissions come from inside a home’ and represent the data in the form of a pie chart. Pls answer with pie chart I WILL MARK U AS BRAINSLIEST IF YOU GIVE RIGHT ANSWER
Answer:
Here's what I get from one source.
Explanation:
[tex]\begin{array}{lc}\textbf{Source} &\textbf{Contribution \%} \\\text{Space heating }& 45\\\text{Water heating} &18\\\text{Space cooling} & 9 \\\text{Computers/Electronics} & 6 \\\text{Lighting} & 6 \\\text{Cooking} & 4 \\\text{Refrigeration} & 4 \\\text{Wet cleaning} & 3 \\\text{Other} & 5 \\\end{array}[/tex]
The pie chart is in the Figure below.
Which of the following is represented by the number of significant figures in a quantity? A) estimation B) precision C) accuracy D) scientific notation
Answer: the answer is B estimation
Explanation:
i just took a test
The one that is represented by the number of significant figures in a quantity is scientific notation. The correct option is D.
What is scientific notation?Scientific notation is a method of expressing numbers that are either too large or too small to be written in decimal form.
In the United Kingdom, it is known as scientific form, standard index form, or standard form.
The proper scientific notation format is an x 10b, where an is a number or decimal number with an absolute value greater than or equal to one and less than ten, or 1 |a| 10. b is the power of ten required for scientific notation to be mathematically equivalent to the original number.
Scientific notation is represented by the number of significant figures in a number.
Thus, the correct option is D.
For more details regarding scientific notation, visit:
https://brainly.com/question/18073768
#SPJ2
If the pH of a weak acid solution is 2.500 and the solution has a concentration of 0.100M, what is the Ka of the weak acid HA?
Answer:
The Kₐ of the weak acid is 1.033×10⁻⁴
Explanation:
The dissociation of a weak acid in aqueous solution is limited to about 5 to 10%
The acid dissociation reaction is given as follows;
HA (aq) + H₂O (l) → H₃O⁺(aq) + A⁻ (aq)
Given that the pH = 2.5, we have
pH = -log₁₀[H₃O⁺] = 2.5
∴ [H₃O⁺] = 10^(-2.5) = 0.0031623
[tex]K_a = \dfrac{[H_3O^+][A^-]}{[HA]}[/tex]
Kₐ = [H₃O⁺][A⁻]/[HA] = (0.0031623^2)/(0.1 - 0.0031623) = 1.033×10⁻⁴
The acid dissociation constant, Kₐ for weak acid is very low as obtained
A scuba diver’s air tank contains oxygen, helium, and nitrogen at a total pressure of 205 atmospheres. The partial pressure of nitrogen is 143 atmospheres, and the partial pressure of helium is 41 atmospheres. What is the partial pressure of oxygen in the tank?
answer is 20
explanation: total Pressure = 205
partial pressure of N = 143
partial pressure of He = 41
total pressure = partial pressure of N + partial pressure of O + partial pressure of He
partial pressure of O = 205 - 185 = 20
Answer:
20
Explanation:
Explain how temperature and volume of a gas are related and use that to make a prediction about
how you can use this information to calculate absolute zero.
Answer:
See explanation
Explanation:
Charles law gives the relationship between volume and temperature of a gas. Charles law States that, the volume of a given mass of gas is directly proportional to its temperature at constant pressure.
Theoretically, it is assumed that when the absolute zero temperature has been achieved, the volume of any ideal gas will be found to be equal to zero. If the volume of the gas is zero, it now implies that all molecular motion will be stopped. This does not happen in real gases as all gases are found to condense to solids or liquids when this temperature is exceeded.
When volume is plotted against temperature, volume of the gas approaches zero at t = −273.15 °C, which is the x-intercept of the Charles law graph. Below this temperature, we can only get negative values of volume which does not exist hence, −273.15 °C is the lowest attainable temperature also known as the absolute zero.
calculate the mass of sodium sulphate required to prepare its 20%of solution in 100 g ofwater
Answer:
25 g
Explanation:
Mass percent implies the mass of solute dissolved in a solution
Mass percent = mass of solute/mass of solute + mass of solvent × 100/1
Since mass percent concentration= 20%
Mass of solvent = 100g
Let mass of solute = x
Hence;
20 = x/x +100 ×100/1
20/100= x/x + 100
0.2 = x/x + 100
0.2(x + 100) = x
0.2x + 20 = x
20 = x - 0.2x
20 = 0.8x
x= 20/0.8
x= 25 g
144g of KCl dissolved in 1000cm3of water at 90oC. Calculate the solubility of KCl at this temperature. (K=39, Cl=35.5, 1dm3=1000cm3).
Answer:
The solubility of KCl is 1.93 mol/dm³
Explanation:
The information given are;
The mass of the potassium chloride, KCl = 144 g
The volume of the water solvent = 1000 cm³ = 1 dm³
The temperature of the solvent = 90 °C
The atomic mass of potassium, K = 39 u
The atomic mass of chlorine, Cl = 35.5 u
The number of moles of potassium in one mole of potassium chloride, KCl = 1 mole
The number of moles of chlorine in one mole of potassium chloride, KCl = 1 mole
The molar mass of the potassium chloride = 39 + 35.5 = 74.5 g/mol
The number of moles, n, of potassium chloride, KCl in 144 g of potassium chloride, KCl is given as follows
n = Mass/(Molar mass) = 144/74.5 = 1.93 moles
1.93 moles will dissolve in 1 dm³
Therefore, the solubility of KCl is 1.93 mol/dm³.
Which of the following is an aldehyde?
Answer: [tex]CH_3CH_2CH_2CHO[/tex] has aldehyde functional group.
Explanation:
Functional groups are specific group of atoms within molecules that are responsible for the characteristic chemical reactions of those molecules.
A. [tex]CH_3CH_2CH_2COCH_3[/tex] has ketone [tex]C=O[/tex] functional group .
B. [tex]CH_3CH_2CH_2COOH[/tex] has carboxylic acid [tex]COOH[/tex] functional group .
C. [tex]CH_3CH_2CH_2CHO[/tex] has aldehyde [tex]H-C=O[/tex] functional group .
D. [tex]CH_3CH_2CH_2COOCH_3[/tex] has ester [tex]RO-C=O[/tex] functional group .
Thus [tex]CH_3CH_2CH_2CHO[/tex] has aldehyde (CHO) group.
Cuantos gramos de sulfato de plomo (II) se requieren para preparar 200mL una solución de esta sal a una concentración de 100 ppm. Si se toma una muestra de 30 mL de la disolución anterior y se diluye en 1000 mL de agua, ¿cuál es la concentración de la disolución?
Answer:
0.020g de sulfato de plomo se requieren
La concentración de la solución diluida es de 3ppm
Explanation:
Las partes por millón (ppm) son definidas como:
miligramos soluto / 1L solución.
Si deseas preparar una solución a 100ppm de sulfato de plomo (II) necesitas 100mg de este sulfato en 1L. En 200mL = 0.200L vas a necesitar:
0.200L × (100mg / 1L) = 20mg de sulfato de plomo (II).
Como 1000mg = 1g,
20mg × (1g / 1000mg) = 0.020g de sulfato de plomo se requieren.
Ahora, se van a tomar 30mL de esta solución y se diluirán a 1000mL. Se diluye la solución:
1000mL / 30mL = 33.33 veces.
Como la solución inicial es de 100ppm, esta dilución genera una solución de concentración:
100ppm / 33.33 = 3ppm
What is meant by 1m length
Answer:
The metre is defined as the length of the path travelled by light in a vacuum in 1/299 792 458 of a second.
which one of the following electronic configuration represents the element that forms simple ion with a charge of-3? (a)1s^2,2s^2,2p^6,3s^2,3p^1 (b)1s^2,2s^2,2p^6,3s^2,3p^3 (c)1s^2,2s^2,2p^6,3s^2,3p^6,3d^1,4s^2 (d)1s^2,2s^2,2p^6,3s^2,3p^6
Answer:
(b)
Explanation:
The 3s^2, 3p^6 orbitals form -3 charge.
This is the element phosphorous and an example of a -3 ion is in aluminium phosphide, AlP3.
The electronic configuration which represents the element forming a simple ion having with a charge of -3 is; 1s², 2s², 2p⁶, 3s², 3p³. Option B is correct.
In this electronic configuration, the element has a total of 16 electrons. To form a simple ion with a charge of -3, the element needs to gain three electrons. This is achieved by adding three extra electrons to the existing configuration.
When the element gains three electrons, the electron configuration becomes:
1s², 2s², 2p⁶, 3s², 3p⁶
This configuration represents the stable octet configuration, where the element has a complete outer shell with eight electrons. Since the charge is -3, it means the element has gained three extra electrons to achieve a stable configuration.
Therefore, the correct electronic configuration representing the element that forms a simple ion with a charge of -3 is 1s², 2s², 2p⁶, 3s², 3p³
Hence, B. is the correct option.
To know more about electronic configuration here
https://brainly.com/question/29184975
#SPJ2
Determine the rate of a reaction that follows the rate law: rate = k[A]^m[B]^n, where: k = 0.2, [A] = 3 M, [B] = 3 M, m = 1, n = 2 A. 1.2 (mol/L)/s B. 27 C. 1.8 D. 5.4
[tex]7.408 \;X 10 ^ {-3} m^{-2} s^{-1}[/tex] is rate of a reaction when k = 0.2, [A] = 3 M, [B] = 3 M, m = 1, n = 2 .
What is the rate of a reaction?The rate at which the concentration of reactant or product participating in a chemical reaction alters is called the rate of reaction.
Rate of reaction = [tex]\frac{change \;in \;concentration}{time}[/tex] = (mol/litre)/time.
m= 1 and n = 2
[tex]rate = K [A] [B]^2[/tex]
[tex]0.2 = K X 3 X 3 ^2[/tex]
K = [tex]\frac{0.2 }{27 }[/tex]
K = [tex]7.408 \;X 10 ^ {-3} m^{-2} s^{-1}[/tex]
Hence, [tex]7.408 \;X 10 ^ {-3} m^{-2} s^{-1}[/tex] is rate of a reaction when k = 0.2, [A] = 3 M, [B] = 3 M, m = 1, n = 2 .
Learn more about the rate of a reaction here:
https://brainly.com/question/8592296
#SPJ2
Answer: 7.4 10-3
Explanation:
7.4 10-3 this is right ong
Julie finds a snail on the sidewalk and wants to know whether or not the snail moves throughout the day. She places a
single mark on the sidewalk next to the snail.
What will Julie use the mark for initially?
determining how fast the snail moves
acting as a standard unit of measure
determining the displacement of the snail
O acting as a reference point for detecting motion
The single mark placed on the sidewalk by Julie has been acting as the reference point for detecting the motion of the snail. Thus, option D is correct.
The snail has been the shelled animal that has been mostly residing in the resting condition with limited movement. To evaluate the movement of the snail, there has been the consideration of a point that was the starting point from the movement.
The line that has been set across the sidewalk has been acting as the reference, and the distance traveled has been calculated from that point. Thus, option D is correct.
For more information about the reference point, refer to the link:
https://brainly.com/question/1674904
why the filament of bulb has high melting point
Answer:
The filament of a bulb has a high melting point because of the heat generated inside the bulb.
Explanation:
When electricity is concentrating and run through a bulb, it starts to generate heat. Leave it on long enough and it will start to build up a lot of heat. Have you ever tried touching a light bulb when it has been all day? It's scorching to the skin.
Since electricity generates heat, the bulb's filament has to have a high melting point so it doesn't melt, destroy the bulb, and leave you light-less. If the filament has a high melting point, then it is able to withstand heat generated by electricity and provide you light.
What does the pH of a solution have to be in order to be a base?
Explanation:
pH is used to measure the concentration of H+ ions ([H+]) and therefore, whether a substance is acidic or basic (alkaline). Solutions with a pH of less than seven are acidic, while those with a pH greater than seven are basic (alkaline).
Answer:
greater than 7
Explanation:
A base is any solution with a pH greater than 7. A pH of 7 is considered neutral. For example, the pH of water. An acid is any solution with a pH less than 7.
Hope that helps.
Acetic acid only partially ionizes in water. A solution contains a large quantity of acetic acid dissolved in water. How can this acid solution best be described?
Answer:
The acid solution is a concentrated solution.
Explanation:
Acetic acid is a weak acid, because it ionizes partially in water as shown below:
CH3COOH + H2O —> H3O+ + CH3COO-
A solution containing a larger quantity of acetic acid is termed concentrated solution.
This is so because a concentrated solution is a solution that contains more of the solute than the solvent.
A solute is the substance which dissolves in the solvent.
A solvent is the substance which dissolves a solute.
In this case, acetic acid is the solute and water is the solvent.
Solution is simply the combination of solute and solvent
Solution => Solute + Solvent
More solute + Less solvent => Concentrated solution
Therefore, a solution containing a higher quantity of acetic acid ( i.e the solute) in water (i.e the solvent) is called a concentrated solution.
What is the electron configuration of chlorine (Cl)?
1s22s22p63s23p3
1s22s22p63s23p5
1s22s22p63s24s23p3
1s22s22p63s23p23d3
Answer:
b) 1s22s22p63s23p5
Explanation:
Answer:
b) 1s22s22p63s23p5
Explanation:
edge 2021
Describe how red shifts were used by cosmologists to determine that the universe was expanding. How
is this evidence for the big bang theory?
Explanation:
astronomers have discover that in general the future of a Galaxy is, the more redshift light is this mean that the further away the Galaxy are the faster they are moving this is similar to explosion where the bits moving fastest travel for furthest on the explosion redshift data provides evidence that the universe including space itself is expanding .
what happens when ca no3 2 is heating it gives CaO ,NO2 and 02
Answer:
balanced equation:
2Ca(NO3)2 (aq)-----> 2CaO (s) + 4NO2 (g) + O2 (g)
So heating 2 moles of Ca(NO3)2 gives 2 moles of CaO, 4 moles of NO2 and 1 mole of O2. This is a heat decomposition reaction. It gives a white precipitate (CaO), and brown pungent gas (NO2).
Answer:
The balanced equation of the reaction is below.
Explanation:
2Ca(NO3)2 -----> 2CaO + 4NO2 + O2.
what is a chemical bond? an attractive force between 2 molecules
Answer:
The chemical bond between 2 molecules is called an intermolecular force.
Answer:
Chemical Bond:
Attraction between two atoms results in the formation of a bond which is called a chemical bond.
Inter molecular Forces:
Attractive Force that in between 2 molecules is called Inter molecular Forces. (Inter : Between)
The mass number of a chromium atom is 52 and it has 24 protons. How many neutrons does this atom have? 24 28 76 80
The number of protons and neutrons together makes the total atomic mass of the element. The atom of chromium has 28 neutrons. Thus, option b is correct.
What is an atomic mass?An atomic mass is the property of an element that defines the number of protons and neutrons of the atom placed in a periodic table. The atomic mass is represented at the lower half of the atomic symbol.
The atomic mass is the sum of the neutrons and the protons that are held together in the nucleus of the atom as a concentrated mass. The atomic number is given as,
Atomic number = number of protons + number of neutrons
Given,
The atomic mass of chromium = 52
Number of protons = 24
Substituting values above:
52 = 24 + number of neutrons
number of neutrons = 52-24
= 28
Therefore, the number of neutrons of a chromium atom is 28.
Learn more about atomic mass here:
https://brainly.com/question/17067547
#SPJ6
Answer: option b, 28
how is impure copper refined by electrolysis
Answer:
By giving electricity to copper compound solution.
Explanation:
Electrolysis is one of the major way of refined copper. The copper containing solution has two electrodes.i) positive electrodes called anode. ii) negative electrodes called cathode. When electricity is pass into the copper containing solution electrolysis process is starts and impure copper is formed in anode and pure copper is formed in cathode.
So, We can get pure copper in cathode through electrolysis.
I Hope this will be helpful for you.
If this is helpful for you .Then choose this answer as brainliest answer.
Hope it helps.
If you have any query, feel free to ask.
What substance does a neutral substance release?
Answer:
Neutral substance is a substance that show no acid or base properties.
Explanation:
Neutral substance is a substances that show no acid or base properties, has an equal number of hydrogen and hydroxyl ions and does not change the color of litmus paper.
Answer:
They release no substance
Explanation:
Since the substance is neutral, nothing will be released from it.
What evidence suggests that global climate change is causing the oceans to get warmer?
Answer:
A large point of evidence in this would be the rate of increase in how fast the polar ice caps are melting and the ocean is rising as a result. As the climate is getting warmer so are the oceans and this is causing the ice caps which are in the ocean.
Explanation: