A ball rolls with a speed of 3 m/s across a level table that is 1.5m above the floor. How far along the floor is the landing spot from the table?
Answer:
d = 1.65 m
Explanation:
Given that,
The speed of a ball, v = 3 m/s
A ball rolls a level table that is 1.5 m above the floor.
We can find how long the ball is in free fall. We can use the second equation of kinematics as follows :
[tex]s=ut+\dfrac{1}{2}gt^2[/tex]
u is the initial speed in the vertical direction
So,
[tex]s=\dfrac{1}{2}gt^2\\\\t=\sqrt{\dfrac{2s}{g}} \\\\t=\sqrt{\dfrac{2\times 1.5}{9.8}} \\\\t=0.55\ s[/tex]
Now, using the formula of velocity.
[tex]v=\dfrac{d}{t}\\\\d=vt\\\\d=3\times 0.55\\\\d=1.65\ m[/tex]
So, the landing spot is at 1.65 m from the table.
D.
because the time is used up due to irrelevant and unnecessary topics
& Every time your group conducts a meeting, nothing is accomplished
that intervene the discussion.
As the group leader, how will you keep your members focused on the
agenda of the meeting using the restriction strategy?
A. Tell them that they will get kicked out from the group if they will
B. End the meeting immediately as soon
as the group begins to
talk about other things irrelevant to the agenda.
c. Give instructions before the meeting starts to confine and limit
what they can say.
D. Show disappointment.
not cooperate.
Answer:
b because I took the quiz
A stationary 10 kg object is located on a table near the surface of the earth. The coefficient of kinetic friction between the surfaces is 0.2. A horizontal force of 40 N is applied to the object.
Answer:
2.04m/s²
Explanation:
Complete Question
A stationary 10 kg object is located on a table near the surface of the earth. The coefficient of kinetic friction between the surfaces is 0.2. A horizontal force of 40 N is applied to the object. Find the acceleration of the object.
According to Newtons second law;
\sum F_x = ma_x
F_m - F_f = ma_x
Fm is the applied force
Ff is the frictional force
m is the mass
a is the acceleration
Substitute the given values
40N - nmg = 10a
40 - 0.2(10)(9.8) = 10a
40 - 19.6 = 10a
20.4 = 10a
a = 20.4/10
a = 2.04m/s²
Hence the acceleration of the object is 2.04m/s²
2.
A hydraulic jack raises a car of 250 N weight to a height of 5.8 m in 5.0 s. The jack does work at a rate of
290 W
216 W
275 W
250 W
hello I wanna know what is the Newton first is also called the law
Answer:
What is another name for the first law of motion? Why is it given that name? Law of inertia. Page 2. It is given that name because inertia is the tendency of an object to resist any change in its motion until an unbalanced force acts on it.
Explanation:
Cell with structures labeled A, B, and C
Cell with structures labeled A, B, and C
What structure represents a chloroplast in the cell?
Emily roller skates with a constant speed
of 8 miles per hour. How far can she travel
in 3 hours? D = SxT
Answer:
She can travel 24 miles in 3 hours.
Which part of the electromagnetic spectrum is typically used to make images based on the temperatures of objects?
X-rays
radio waves
infrared light
visible light
Answer:
Which part of the electromagnetic spectrum is typically used to make images based on the temperatures of objects?
X-rays
radio waves
infrared light<<<----- CORRECT
visible light
Explanation:
Edge 2021
Infrared light is typically used to make images based on the temperatures of objects.
What is meant by electromagnetic spectrum?The range of all EM radiation arranged from high to low frequency (short to long wavelength) according to their frequency or wavelength. is known as the electromagnetic spectrum (EM).
Here,
Similar to visible light, X-rays are a type of electromagnetic radiation. X-rays have a higher energy than light, on the other hand, and can penetrate most materials, including the human body.
Images of inside body tissues and structures are produced using medical x-rays.
Electromagnetic energy in the infrared region of the spectrum can be seen by them. There is a relationship between an object's temperature and the electromagnetic radiation it releases since infrared radiation is strongly related to object temperature.
Hence,
Infrared light is typically used to make images based on the temperatures of objects.
To learn more about electromagnetic spectrum, click:
https://brainly.com/question/15576247
#SPJ5
A spring has a constant of 875 N/m. What hanging mass will cause this spring to stretch 4.5 m?
Answer:
8) A hanging 7.5 kg object stretches a spring 1.1 m. What is the spring constant? 1 . 1 66. 82 NIMO 9) A spring has a constant of 875 N/m. What hanging mass will cause this spring to stretch 4.5 m? Iouliply then divide 875 X 4. 2- - (4 04. 7919) 10) A spring with a spring constant of 25 N/m is stretched 65 cm. What was the force used? 11) A 25 N force stretches a spring 280 cm. What was the spring constant? 12) A 75 N force stretches a spring 175 cm. What was the proportionality constant? 8) 66.82 N/m 9) 401.79 kg 10) 16.25 N 11) 8.93 N/m 12) 42.86 N/m
Explanation:
A spring has a constant of 875 N/m. and the mass which will cause this spring to stretch 4.5 meters is 401.78 kg.
What is Spring constant?The spring constant is a characteristic of a spring which is defined as the ratio of the force affecting the spring to the displacement which is caused by that force. The SI unit of spring constant is N.m⁻¹ (Newton per meter).
The spring constant is:
F = -k/ x
where, k is the spring constant
F denotes the force,
and x denotes the change in the length of the spring.
k = 875N/m
x = 4.5m
We know that
Kx = mg
m= kx/ g
m = 875 × 4.5/ 9.8
m = 401.78kg
Therefore, the mass which will cause this spring to stretch 4.5 meters is 401.78 kg.
Learn more about Spring constant here:
https://brainly.com/question/14159361
#SPJ5
What is the definition of endothermic and exothermic?
pls help on a timer will give brainlist
Answer:
An exothermic process releases heat, causing the temperature of the immediate surroundings to rise. While an endothermic process absorbs heat and cools the surroundings
Explanation:
Answer:
Basically, endothermic feels cooler to touch than exothermic.
Explanation:
Endothermic reactions are just reactions that emit energy (in form of heat) to its surroundings. Exothermic ones, on the other hand, draw energy from its surroundings to occur.
Always think - "Endothermic is cool. Exothermic is not cool."
Pls place the words in the right place I'll give brainless and the points!
Explanation:
you measure temperature in degrees celsius using a thermometer. Thermal energy is measured in joules. A larger volume of water will take longer to heat up but will store more energy than the smaller object. However, a smaller object will lose it's heat faster than a larger object. A cup of tea has less thermal energy than a swimming pool.
Based on their locations on the periodic table, which two elements would you
expect to form positive ions with a +3 charge?
O A. Nitrogen, N
O B. Aluminum, Al
O C. Phosphorus, P
D. Boron, B
Answer:
i think it would be B. Aluminum, Al and D. Boron, B
Explanation:
since they're both in group 13 and they forms a 3+ ion
A force of 6.0 Newton’s is applied to a block at rest on a horizontal frictionless surface over a 7.0 meter span. How much energy is gained by the block.
Answer:
42J
Explanation:
Given parameters:
Force applied = 6N
Distance moved = 7m
Unknown:
Amount of energy gained by the block = ?
Solution:
The amount of energy gained by the block is the same as the work done on the block.
The work done is the force applied to move the block through a distance;
Energy gained = force x distance = 6 x 7 = 42J
of the following states of motion, the one which requires balanced forces is:
A: a decrease in speed in a straight line
B: an increase in speed in a straight line
C: constant speed in a straight line
D: a change in the direction of the motion
A balanced force is required for a change in the direction of the motion.
What is a force?According to Newton's second law of motion, the force applied to a body is directly proportional to the product of mass and acceleration of the body.
Balanced forces
Balanced forces are those that are opposite in direction and equal in size. When forces are balanced there is no change in direction.
Thus, when there is change in direction, a balance force can be applied to cancel the change in direction of motion.
Learn more about balanced forces here: https://brainly.com/question/485828
1. Find the momentum of an object of mass 5 kg with a velocity of 2 m/s. *
a. 2.5 kg.m/s
O b. 10 kg.m/s
c. 0.25 kg.m/s
d. 20 kg.m/s
Answer:
10kgm/s
Explanation:
Momentum = Mass * Velocity (both in standard units)
Momentum = 5 * 2 = 10kgm/s
How does an electrical field change when it interacts with an opposing field
Answer:
The electric field will exert a force that accelerates the charged particle. The electric field has a direction, positive to negative. ... If it is moving in the opposite direction it will decelerate. If a negative charge is moving in the same direction as the electric field vector the particle will decelerate.
The specific heat capacity of iron is 450.5. A 15.5 kg block of iron with
an initial temperature of 20 degrees Celsius is heated with 250 J. What will
the final temperature of the iron be?
Answer:
[tex]T_f=20.03^{\circ} C[/tex]
Explanation:
Given that,
The specific heat capacity of iron is 450.5 J/g°C
The mass of block of iron, m = 15.5 kg
Initial temperature, [tex]T_i=20^{\circ} C[/tex]
Heat required, Q = 250 J
We need to find the final temperature of the iron. The formula for heat required is given by :
[tex]Q=mc\Delta T\\\\Q=mc(T_f-T_i)\\\\\dfrac{Q}{mc}=(T_f-T_i)\\\\T_f=\dfrac{Q}{mc}+T_i\\\\T_f=\dfrac{250}{15.5(450.5)}+20\\\\T_f=20.03^{\circ} C[/tex]
So, the final temperature of the iron is [tex]20.03^{\circ} C[/tex].
The speed of the wooden bar is changed so that the bar hits the water fewer times each second.
What happens to the frequency of the waves produced?
A. Increases
B. Does not change
C. Decreases
Answer:
c - the frequency of the waves decreases
when a chemical reaction occurs, chemical bonds ______ break and new chemical bonds form to create the __________
Answer:
a) reactant
b) product
Explanation:
During a chemical reaction, the reactants interact among themselves in a specific temperature, pressure, pH, enzyme etc. Due to various intra and inter molecular and atomic interactions, the chemical bonds in the reactants break down. Formation of new chemical product is governed by the formation of new bond (ionic, covalent, hydrogen vander waal etc. )
Some snakes have special sensory organs that detect the infrared region of the electromagnetic spectrum. Compared with human vision, these snakes can sense electromagnetic waves that have
a lower frequency and a shorter wavelength.
a higher frequency and a longer wavelength.
a lower frequency and a longer wavelength.
a higher frequency and a shorter wavelength.
Answer:
A lower frequency and a longer wavelength is correct on edge 2021
please thank the person above me though, they deserve it.
These snakes can sense electromagnetic waves that have a lower frequency and a longer wavelength.
How do snakes detect?With almost ineffective hearing and vision, snakes can be extremely fast animals. Snakes can use chemoreceptors, heat, and even their tails to recognize prey and mates. With mostly ineffective hearing and vision systems, snakes can be extremely fast animals.
They also “see” in infrared. Thanks to the mechanism, they can track prey up to a meter away by the heat of their bodies. They use a simple organ, the loreal pit, located near the nostrils.
See more about snakes at brainly.com/question/412688
what are the factors that affect orbital velocity
Answer:
the mass of the central body (earth) and the radius of the orbit affect orbital velocity
Explanation:
A(n) ________________________ is a molecule that is soluble in both polar and nonpolar solvents.
Answer: ethanol which will dissolve in both water (a polar solvent) and gasoline (a non-polar solvent)
Explanation:
According to the concept of solubility, ethanol is a molecule which is soluble in both polar and non-polar solvents.
What is solubility?
Solubility is defined as the ability of a substance which is basically solute to form a solution with another substance. There is an extent to which a substance is soluble in a particular solvent. This is generally measured as the concentration of a solute present in a saturated solution.
The solubility mainly depends on the composition of solute and solvent ,its pH and presence of other dissolved substance. It is also dependent on temperature and pressure which is maintained.Concept of solubility is not valid for chemical reactions which are irreversible. The dependency of solubility on various factors is due to interactions between the particles, molecule or ions.
Learn more about solubility,here:
https://brainly.com/question/3479494
#SPJ5
The acceleration due to gravity is 9.81 m/s2, towards the Earth. Rain falling from an altitude of 9,000 m would fall for about 1.5 minutes before hitting the ground (ignoring air resistance). What would be the final speed of a raindrop by the time it reaches the ground?
Answer:
the final speed of the rain is 541 m/s.
Explanation:
Given;
acceleration due to gravity, g = 9.81 m/s²
height of fall of the rain, h = 9,000 m
time of the rain fall, t = 1.5 minutes = 90 s
Determine the initial velocity of the rain, as follows;
[tex]h = ut + \frac{1}{2} gt^2\\\\9000 = 90u + \frac{1}{2} (9.8)(90)^2\\\\9000 = 90u + 39690\\\\90u = -30690\\\\u = \frac{-30690}{90} \\\\u = -341 \ m/s[/tex]
The final speed of the rain is calculated as;
[tex]v^2 = u^2 + 2gh\\\\v^2 = (-341)^2 + 2(9.8\times 9000)\\\\v^2 = 292681\\\\v = \sqrt{292681} \\\\v = 541 \ m/s[/tex]
Therefore, the final speed of the rain is 541 m/s.
Answer:
The magnitude of the final speed of a raindrop by the time it reaches the ground will be 541.45 m/s.
Explanation:
The final speed of the raindrop can be found using the following equation:
[tex] v_{f} = v_{0} - gt [/tex]
Where:
[tex]v_{f}[/tex]: is the final speed =?
[tex]v_{0}[/tex]: is the initial speed
g: is the acceleration due to gravity = 9.81 m/s²
t: is the time = 1.5 min
First, we need to find the initial speed:
[tex] y_{f} = y_{0} + v_{0}t - \frac{1}{2}gt^{2} [/tex]
Where:
[tex]y_{f}[/tex]: is the final height = 0
[tex]y_{0}[/tex]: is the initial height = 9000 m
Hence, the initial speed is:
[tex] v_{0} = \frac{y_{f} - y_{0} + \frac{1}{2}gt^{2}}{t} = \frac{0 - 9000 m + \frac{1}{2}9.81 m/s^{2}*(90 s)^{2}}{90 s} = 341.45 m/s [/tex]
Hence, the final speed is:
[tex] v_{f} = v_{0} - gt = 341.45 m/s - 9.81 m/s^{2}*90 s = -541.45 m/s [/tex]
Therefore, the magnitude of the final speed of a raindrop by the time it reaches the ground will be 541.45 m/s.
I hope it helps you!
A construction crane is on top of a skyscraper which has height 45m. The crane itself is 10m in height. What is the gravitational potential energy in joules of a 60kg worker who is standing on top of the crane? (Use g=9.81 in your calculations)
Answer:
32340J
Explanation:
Given parameters
Height of skyscraper = 45m
Height of crane = 10m
Mass of worker = 60kg
g = 9.81m
Unknown:
Gravitational potential energy = ?
Solution:
The gravitational potential energy of a body is the energy due to the position of the body.
It is expressed as:
G.P.E = mgh
m is the mass
g is the acceleration due to gravity
h is the height = 45 + 10 = 55m
G.P.E = 60 x 9.8 x 55 = 32340J
In handball, who is the only player allowed in the goalie area?
Answer:
Only the goalie is allowed inside the goal crease. The only exception when another player is allowed in the goal area is when they take off from outside the goal area, and shoots or passes the ball before landing. To avoid interference with other players, the player must then exit the goal area as soon as possible.
Explanation:
Which force is an attractive force that is affected by the masses of objects?
A) tension force
B) magnetic force
C) normal force
D) gravitational force
Class: Physical Science B
Answer:
D) gravitational force
A squirrel starts at rest and accelerates at 2.3 m/s^2 for 5.22 seconds. What is it's final velocity?
Please provide the variable, number, and unit e.g., a= 1.34 m/s^2
Answer:
12.259 m/s
Explanation:
An object starting at rest and accelerating at a constant acceleration a for t seconds has a velocity of
[tex]v=at[/tex]
If we substitute in the values a = 2.3 m/s² and t = 5.22 s, we get a velocity of
[tex]2.3(5.22)=12.259[/tex] m/s
The athlet at point A runs 150m east, then 70m west and then 100 east
Determine the resultant displacement of the athlete relative to point A
Answer:
180m to the east
Explanation:
Displacement is the distance traveled in a specific direction. It is a vector quantity with both magnitude and direction. Therefore, the start and finish position is very paramount.
point A runs 150m east,
70m west
100m east
150m
--------------------------------------------------------→
70m
←---------------------
100m
-----------------------------------→
The displacement of the athlete = 150 - 80 + 100 = 180m to the east
Which of the following are common forms of energy released by electrons dropping from heightened energy levels?
Answer:
C. Light, Kinetic
Explanation:
The options:
A) Light, Heat
B)Motion, sound
C)Light, Kinetic
D)Heat, Potential
Answer:
A) Light, Heat
Explanation:
Tell me if im wrong!
please answer and fast i am in a test
Answer:
Online means connected to a network.
Credible means reliable or trustworthy
Cite means to quote from an article or book.