Answer:
NO! It would be in violation of the workplace regulation regarding oxygen.
Explanation:
Bulk oxygen systems convey liquified oxygen which is of geat use and importance in institutions like a nuirsing home.
Liquified oxygen is gaseos oxygen that has been condensed under high presures into liquid form. It is transported via a complex system of vaporizers, storage tanks and pipes around the facility it is needed. Liquified oxygen is oxygen- rich.
Asphalt is a petroleum derivative that is often used to in coating surfaces and tarring roads.
Its primry constituent is Carbon with minor constitunets like sulphur, nirogen, oxygen. As a petrolem derivative, it is very combustible.
In the event of an oxygen leak on an asphalt surtface, oxygen acting as an oxidizing agent can combine with asphalt in the presence of air, to cause a large fire.
Hence, asphalt surfacing in areas of oxygen leaks, would not be in compliance with the workplace regulation as it has the potential of causing a fire in the nursing home.
Which of the mechanical waves below has the greatest energy?
Answer:
Blue wave.
Explanation:
The energy of a wave depends on its amplitude. A wave having more amplitude will have greatest energy while a wave having small amplitude will have least energy. The given figure shows four waves that are shown with green, orange, blue and red color. It is very clear from the figure that the amplitude of blue wave is greatest of all the wave.Hence, blue wave will have greatest energy.List four examples of diffusion seen in daily life.
Answer:
Spraying perfume in one corner of the room and the smell travels to the other side of the room
Explanation:
How to know number of proton/electron from ionisation energy?
also how to know ionisation energy from number of electron?
How to know group of element? (like Iodine - group 17)
Answer:
Ionization energy decreases from top to bottom in groups as the size of the atom becomes larger. For example, the first ionization energy of hydrogen is 1310 kJ mol⁻¹. The first ionization energy of lithium is 519 kJ mol⁻¹. Because lithium is a bigger atom and has more protons than hydrogen, its ionization energy is lower. So, in groups, the lower the ionization energy, the larger the atom and the more protons/electrons it has.
Ionization energy also increases from left to right across a period. The more protons in the nucleus, the greater the attraction between the nucleus and the electrons, which makes it more difficult to remove electrons. Helium has an ionization energy of 2370 kJ mol⁻¹ while hydrogen has an ionization energy of 1310 kJ mol⁻¹ because helium's nucleus has 2 protons attracting electrons instead of 1 like hydrogen. So for periods, the higher the ionization energy, the smaller the atom and the more protons/electrons it has.
Ionization energy is the energy required to remove an electron from its orbital around an atom. It increases across a period because the number of protons in the nucleus increases. This creates a stronger attraction between the nucleus and electrons, causing the electrons to be held tighter by the higher nuclear charge. Because the electrons are more difficult to remove, more energy is required which causes the ionization energy to be higher. So for periods, the more electrons the atom has, the higher the ionization energy. Ionization energy decreases down a group because the first electron removed is farther from the nucleus as the number of protons increases. Being farther away from the nucleus makes it easier for the electron to be pulled off as it is more loosely bounded, so less energy is required to remove the electron which causes the ionization energy to be lower. So for groups, the more electrons the atom has, the lower the ionization energy.
Groups are vertical columns going down on the periodic table. If you look at a periodic table, across the top, you will see the numbers 1-18. Those numbers signify the 18 groups of the periodic table. Iodine is a halogen so it is under Group 17 to the far right of the periodic table.
I attached two periodic tables for reference to everything that I've said as I've written a lot. Hope that helps.
Which action destroys topsoil?
Answer:
I think it erosion
Explanation:
Well erosion washes away top soil
Which of these elements have the smallest 1st ionization energy
Answer:
Ionization energy increases as you go across a period, and increases as you move up a group. So, elements with the smallest ionization energy would be at the bottom left corner of the periodic table. Examples of elements with small ionization energy: Francium (Fr), Cesium (Cs), Radium (Ra).
How did Bohr describe the arrangement of particles within an atom?
A. Protons and electrons form the nucleus, with neutrons
orbiting it.
O B. Neutrons make up the atom's nucleus, with electrons and
protons orbiting it.
c. Protons make up the atom's nucleus, with electrons and
neutrons orbiting it.
O D. Protons and neutrons form the nucleus of the atom, with
electrons orbiting it.
Bohr describe the arrangement of particles within an atom by: O D. Protons and neutrons form the nucleus of the atom, with electrons orbiting it.
Who is Niels Bohr?This hypothesis states that the atom's core is a small, compact, positively charged nucleus. Protons which have a positive charge and neutrons which are neutral are both found in the nucleus.
Specific energy levels or electron shells are where the negatively charged electrons orbit the nucleus. Due to the quantization of these energy levels, only a limited number of discrete energy states are accessible to electrons.
Therefore the correct option is D.
Learn more about Niels B.o.h.r
here:https://brainly.com/question/1402660
#SPJ1
------------neutral particles in an atom
Answer:
neutrons :
Explanation:
Protons are positively charged, while electrons are negatively charged. Neutrons are electrically neutral, as the name suggests. The electric charge, noted Q , is a physical quantity.
Which of these is an ex
example of a composite material?
Answer:
A composite material is a material made from two or more constituent materials with significantly different physical or chemical properties that, when combined, produce a material with characteristics different from the individual components.
Explanation:
you're welcome
A current is induced in a wire by moving the wire through a magnetic field. Which is one factor that affects the direction of the current?
Answer:
One factor that affects that affects the direction of the current is the direction of motion of the wire
Explanation:
According to Fleming's right hand rule when a conductive wire which is within a circuit is moved through a magnetic field, due to Faraday's law of electromagnetic induction an electric current is induced in the wire such that the direction of motion of the wire, the direction of the magnetic field and the direction of the electric current are perpendicular to each other such that if the right hand has the thumb middle finger and the index finger held perpendicular to each other
The motion of the wire being in the direction of the wire
The first or index finger points in the direction of the magnetic field
The middle finger points in the direction of the induced electric current
Therefore, the direction of the the current depends on the direction of motion of the wire.
Question 1 of 10
Which two terms apply to oceanic crust rather than continental crust?
A. Thicker
O B. Lighter in color
0 C. Denser
I D. Younger in age
The two terms apply to oceanic crust rather than continental crust C. Denser and D. Younger in age
What is the oceanic crust made up of?
Oceanic Crust Oceanic crust, extending 5-10 kilometers (3-6 kilometers) beneath the ocean floor, is mostly composed of different types of basalts. Geologists often refer to the rocks of the oceanic crust as “sima.” Sima stands for silicate and magnesium, the most abundant minerals in oceanic crust.
What is an example of oceanic crust?Oceanic crust is thin (6 km thick) and dense (about 3.3 g/cm), consisting of basalt, gabbro, and peridotite. They include oceanic sediments (e.g. radiolarites, turbidites) and oceanic crust (e.g. basalt, pillow lava).
Learn more about Oceanic crust here https://brainly.com/question/26053779
#SPJ2
A molecule of chlorine has atoms of the same element, and a molecule of carbon dioxide has different kinds of atoms. Based on this information, chlorine is and carbon dioxide is .
Answer:
chlorine is element and carbon dioxide is compound
Answer:
The correct answer would be that Chlorine is an Element and Dioxide is an Compound.
What do neurons and protons have in common?
Answer:
Protons and neutrons have almost the same mass and are both located in the nucleus of the atom
Answer:
Protons and neutrons have almost the same mass and are both located in the nucleus of the atom. Protons are charged particles. Neutrons are neutral particles. ... The positive charge of the protons in the nucleus is balanced by the negative charge of the electrons.
What’s the capital city of Turkey?
Answer:
Ankara is the capital of Turkey! Hope this helped you out! :)
Explanation:
The capital of Turkey is Ankara
hopefully this helped :3
2g of magnesium Oreo to excess dilute acid according to the equation Mg(s) + 2H (aq) --- Mg² (aq) + H2 (g) (Realitive atomic mass of Mg= 24, molar mass volume at room temperature and pressure = 24dm³) The volume of hydrogen, measured at room temperature I pressure, that is produced is A) 1000 cm³ B)1500 cm³ C) 2000 ³cm D) 24 000 cm³
Answer:
Option C. 2000 cm³.
Explanation:
We'll begin by calculating the number of mole in 2 g of Mg. This is illustrated below:
Molar mass of Mg = 24 g/mol
Mass of Mg = 2 g
Mole of Mg =?
Mole = mass /Molar mass
Mole of Mg = 2/24
Mole of Mg = 8.33×10¯² mole.
Next, we shall determine the number of mole of H2 produced from the reaction. This is illustrated below:
Mg(s) + 2H^+ (aq) —› Mg^2+(aq) + H2 (g)
From the balanced equation above,
1 mole of Mg reacted to produce 1 mole of H2.
Therefore, 8.33×10¯² mole of Mg will also produce 8.33×10¯² mole of H2.
Finally, we shall determine the volume of H2 produced. This is illustrated below:
1 mole of H2 occupy 24000 cm³ at room temperature and pressure.
Therefore, 8.33×10¯² mole of H2 will occupy = 8.33×10¯² x 24000 ≈ 2000 cm³ at room temperature and pressure.
Therefore, 2000 cm³ of H2 were obtained from the reaction.
The steady state vital to life is possible because:________
a. the cell cannot convert energy from one form to another.
b. all cells are autotrophic.
c. all reactions are exothermic.
d. the cell continually takes up energy from the environment.
e. all reactions are at equilibrium.
Answer: The correct answer is e) all reactions are at equilibrium.
Explanation: In order for cellular vitality to develop, it is necessary for it to be in energetic balance with the environment, that is, to give and receive energy with the environment that surrounds it through endothermic or exothermic reactions. That is why the development of life is considered a system that constantly exchanges with the environment. In turn, that the cell unit maintains a balance with the environment causes homeostasis to occur among the whole organism.
Select the correct answer.
Which of these conditions would most likely cause a decrease in the population of any species?
ОА.
increased competition for resources
improved access to mates
OC.
elimination of predators
OD
decrease in pathogens
Answer(A increased competition for resources
Hope you get it right have a nice day
Answer:
A. increased competition for resources
Explanation:
Based on the kinetic molecular theory, which of the following statements is correct about the particles in a sample of gas at a constant temperature and
volume?
They have negligible kinetic energy
They attract each other with strong forces.
There is a lot of empty space between them.
Their net kinetic energy decreases due to collisions.
Answer:
There is a lot of empty space between them.
Explanation:
The kinetic molecular theory postulates that a substance is made up of tiny particles called molecules. The molecules of a gas are in constant random motion and collide elastically with each other. They also collide with the walls of the container.
The magnitude of intermolecular forces of attraction between gas molecules is very small. Hence gas molecules are largely apart with a lot of empty space between gas molecules.
Answer:C, There is a lot of empty space between them.
Explanation:
answer the question briefly: How can atom collapse and why are atoms stable?
The nuclei of atoms become unstable when the repelling forces of the protons cannot be balanced by the number of neutrons in the nucleus. It then re-arranges itself randomly to a more stable configuration by emitting any of a series of particles. During radioactive decay, an atom does not collapse.
Since an atom is mostly empty space - that is it’s nucleus is relatively distant from the electron shells so, in the presence of extreme forces such as gravity inthe collapse of a large star, the inward pressures on the atom overcome the natural balance of the atomic structure and the ‘empty space’ disappears as nuclei are mashed together by the intense pressures and a neutron star is formed. Under even more external pressure, even the neutron star can collapse to form a black hole.
A sample of O2 gas is collected over water at 25oC at a barometric pressure of 751 torr. The vapor pressure of water at 25oC is 23.8 torr. What is the partial pressure of the O2 gas in the sample
Answer:
727.7 torr
Explanation:
Since the gas was collected over water, it is likely to be saturated with water vapour and the total pressure is given as;
Ptotal = Pgas + Pwater
From the question;
Ptotal = 751 torr
Pgas = ?
Pwater = 23.8 torr
Making Pgas subject of equation, we have;
Pgas = Ptotal - Pwater
Pgas = 751 torr - 23.8 torr
Pgas = 727.7 torr
The radioactive isotope used for carbon dating is
1. Carbon 12
2. Carbon 13
3. Carbon 15
4. Carbon 14
Carbon 14 would be your answer, however if it's more than one answer it would also be Carbon 12, so yeah. Your best bet would be Carbon 14.
How do gases responsible for acid rain get into the atmosphere
I'm a scientist working on a very high-class operation in a classified area, we experienced some very strange encounters with the people we test on, like trying to bite us,attack us causing harm i think we discovered something.
Answer:
The most important first realization is to find out if the patients are deceased and their bodies are acting under an outside volition such as a virus reanimating the body through the use of the brain stem. If they are still living then they are what would be called infected if dead they are the undead naturally enough. Keep them contained as best you can but knowing scientists they will get free. When facing an infected they can die to any injuries that a normal human can they just won't react to pain so don't shoot for the head blast that thing in the chest then hit it in the head while it's down. Forget hand to hand combat or most close-ranged weapons unless absolutely necessary because close contact means exposure to fluids from the zombie they don't have to bite you to turn you. There is so much more to be said about this I recommend picking up the ZAS zombie survival book I recently got it and have not yet finished it but have learned a great deal.
Explanation:
Yes I fully understand this is not real and I simply felt like answering in a detailed manner for fun and that book is a serious recommendation.
Answer:
The most significant first acknowledgment is to see whether the patients are expired and their bodies are acting under an outside volition, for example, an infection vivifying the body using the cerebrum stem. On the off chance that they are as yet living, at that point they are what might be called tainted if dead they are the undead normally enough. Keep them contained as well as can be expected however knowing researchers they will get free. When confronting a tainted they can bite the dust to any wounds that an ordinary human can they just won't respond to torment so don't go for the head shoot that thing in the chest at that point hit it in the head while it's down. Disregard hand to hand battle or most close-extended weapons except if completely fundamental since close contact implies introduction to liquids from the zombie they don't need to nibble you to turn you. There is quite a lot more to be said about this I suggest getting the ZAS zombie endurance book I as of late got it and have not yet completed it yet have taken in a lot.
Explanation:
If a had a number that was 12.47, what would be the answer rounded to 2 sig figs?
12
Explanation:
Look at the number directly after the number you want to keep. I'm your case you want to keep the first two numbers and the number directly after is 4 so there is no need to round up. Keep your 12 without a decimal.
Triangle DEF is congruent to TriangleD'EF' by the SSS theorem. Which single rigid transformation is required to map TriangleDEF onto TriangleD'EF'? dilation reflection rotation translation
Answer:
B. reflection
Explanation:
Rigid transformations are methods involved in changing the dimensions or orientation of a given figure. The methods are; dilation, rotation, translation and reflection.
Reflection is the process in which a given figure is turned or flipped with respect to a point or line of reference.
In the given question,
ΔDEF ≅ ΔD'EF' (Side-Side-Side congruence property)
This implies that ΔDEF was reflected about point E to produce ΔD'EF'. Thus the required rigid transformation is reflection.
Answer:
Is C - Rotation
Explanation:
I have right on my test
which of the following would be an appropriate situation for you to use the eye wash station
Answer:
if your eyes are exposed to a hazardous chemical you should use the eye wash station. The first few seconds after exposure to a hazardous chemical are critical.
The intake stroke of a positive displacement compressor is most similar to that of a
A. thermostatic expansion valve.
B. auxillary electric water pump.
C. one-stroke variable displacement compressor.
D. two-stroke cylinder engine.
Answer:
D. two-stroke cylinder engine.
Explanation:
Two-stroke cylinder engine: In chemistry, the term "two-stroke cylinder engine" is described as one of the types of "internal combustion engine" that tends to complete a single "power cycle" possessing two different strokes of the "piston" during a particular "crankshaft revolution".
It generally consists of two different strokes that are being often known as power or exhaust and suction stroke.
In the question above, the given statement signifies the "two-stroke cylinder engine".
The graph compares the kinetic energies of the molecules in four gas samples. Each graph shows a normal distribution, so the average is the center. Which sample is likely to have the lowest temperature? (1 point) A B C D
Answer:
d
Explanation:
i got it right
Gas A is likely to have the lowest temperature. Hence, option A is correct.
What are molecules?The smallest particle of a substance has all of the physical and chemical properties of that substance. Molecules are made up of one or more atoms.
In a gas, the kinetic energy is directly proportional to the temperature under constant pressure and volume.
As you can see in the problem, the average of A has low kinetic energy. But the average is increasing between B, C and D.
As gas A has the lowest average kinetic energy:
Gas A is likely to have the lowest temperature
Hence, option A is correct.
Learn more about molecules here:
https://brainly.com/question/28069497
#SPJ2
Adding a base to a solution would...?
Answer:
it would decrease [h+]
Explanation:
This is due to neutralization If a base is added to an acidic solution, the solution becomes less acidic and its position changes to the middle of the pH scale.
hope this helps
Answer:
Raise the pH
decrease [H+]
Explanation:
=> Adding base would raise the pH (Bases have more pH and Acids have less pH)
=> Adding base would decrease the concentration of [H+] ions as it contains hydroxyl ions which neutralized with H+ ions so as a result the concentration of [H+] ions decreases.
Potassium hydrogen tartrate is an acid used in making cookies such as snicker doodles. (In your home, it is called cream of tartar.) It can be titrated with a base such as KOH to determine purity. A sample of 0.500 g is titrated to a pink endpoint with 21.58 mL of 0.1125 M KOH. Determine the percentage of potassium hydrogen tartrate (KHC4H4O6) in the sample. The acid/base ratio is 1:1.
Answer:
91.4%
Explanation:
Potassium hydrogen tartrate, KHT, reacts with KOH as follows.
KHT + KOH → H₂O + K₂T
where 1 mole of acid (KHT) reacts per mole o base (KOH), -That is acid/base ratio 1:1
The endpoint of a titration is the point in which moles of KOH = moles of KHT, you can see this endpoint with an indicator or doing a potentiometric titration.
As the endpoint requires 21.58mL = 0.02158L of a 0.1125M KOH, moles of KOH = moles of KHT are:
0.02158L × (0.1125mol / L) = 2.428x10⁻³ moles of KOH = moles of KHT
To convert these moles to grams you use molar mass of KHT (188.177g/mol):
2.428x10⁻³ moles of KHT × (188.177g / mol) = 0.457g of KHT are in the sample.
As you add 0.500g of sample, percentage of KHT in the sample is:
(0.457g / 0.500g) × 100 =
91.4%-That is the purity of the sample-
write chemical equation for the following decomposition reactions. Aluminum oxide(s) decomposes when electricity is passed through it.
Answer:
2Al2O3 (l) ---> 4Al (l) + 3O2 (g)
Explanation:
The reaction is the electrolysis of aluminium oxide. It decomposes aluminium oxide (Al2O3) into aluminium metal (Al) and Oxygen (O2). In this process, aluminium oxide is molten (liquid state) so that ions can move to complete the electricity circuit.
Al2O3 (l) ---> Al (l) + O2 (g)
Balance the equation:
2Al2O3 (l) ---> 4Al (l) + 3O2 (g)