A patient with severe metabolic acidosis has a blood plasma pH of 6.90
What is the [OH−] of the blood plasma?

Wilma- tt

Wilbur- TT

c) 100% chance

d) 100% chance

it has been a while since I've done this so it could be wrong but im pretty sure its correct

Wilbur's family claims it is pure so they have TT

and his wife simply has big eyes so its tt

so the chances of their children having either eye shape is 100%

I'm sorry- im not too good at explaining it ><

Answer:

I had the answer

Explanation:

Moles to particles Now suppose you want to determine how many particles of sucrose are ... Driving Question Board Have students revisit the DQB to remind themselves of the Unit and Module questions.

Answer:

3 NaOH (aq) + H3PO4 (aq) → Na3PO4 (aq) + 3 H2O (l)

Explanation:

This is an acid-base reaction (neutralization): NaOH is a base, H3PO4 is an acid.

When the equation is balanced, and the coefficient of H₂O is 3.

To balance the chemical equation:

NaOH + H₃PO₄ ⇒ Na₃PO₄ + H₂O

The number of atoms of each element is the same on both sides of the equation.

Balance the hydrogen atoms. There are three hydrogen atoms on the left side and two hydrogen atoms on the right side. To balance the hydrogen atoms, multiply H₂O by a coefficient of 3:

NaOH + H₃PO₄ ⇒ Na₃PO₄ + 3H₂O

If the oxygen (O) atoms are balanced. There are four oxygen atoms on the right side, but only two oxygen atoms on the left side. To balance the oxygen atoms, we need to multiply NaOH by a coefficient of 2.

To learn more about the chemical equation, follow the link:

https://brainly.com/question/28792948

#SPJ6

Answer:

Atoms react with atoms of other elements to form compounds because , every atom wants to attain noble gas configuration . Atoms interact with one another by transferring or sharing electrons that are furthest from the nucleus. These outer electrons govern the chemical properties of the element.

Explanation:

~Hope this helps

Answer:

[Ba²⁺] = 1.58 × 10⁻³ M

[Cl⁻] = 3.16 × 10⁻³ M.

Explanation:

Step 1: Calculate the molar concentration of BaCl₂

We have 3.50 mL (V₁) of a 0.00450 M (C₁) BaCl₂ solution and we dilute it to a final volume of 10.00 mL (V₂). We can calculate the final concentration of BaCl₂ by using the dilution rule.

C₁ × V₁ = C₂ × V₂

C₂ = C₁ × V₁ / V₂

C₂ = 0.00450 M × 3.50 mL / 10.00 mL = 1.58 × 10⁻³ M

Step 2: Calculate the molar concentrations of the Ba²⁺ and Cl⁻ ions

Let's consider the dissociation of BaCl₂.

BaCl₂(aq) ⇒ Ba²⁺(aq) + 2 Cl⁻(aq)

The molar ratio of BaCl₂ to Ba²⁺ is 1:1. The molar concentration of Ba²⁺ is 1/1 × 1.58 × 10⁻³ M = 1.58 × 10⁻³ M.

The molar ratio of BaCl₂ to Cl⁻ is 1:2. The molar concentration of Cl⁻ is 2/1 × 1.58 × 10⁻³ M = 3.16 × 10⁻³ M.

We have that the statement that explains why NaCl dissolves in water even though the process is endothermic the given as,

Option A

Generally ,Sodium chloride  is crystalline salt, when  its dissolved is H20 , it dissociates its ion, the ions are scattered through out the solution which results in increased  in randomness .

Therefore, the entropy increases when NaCl dissolves in water,

Option A

For more information on Heat visit

https://brainly.com/question/15267055

Answer:

C

Explanation:

1atm=760torr

X=250torr

Cross multiply

760torrX=250torr*atm

Divide both sides by 760torr

X=250torr*atm/760torr

X=0.32895atm

X=0.329atm

Option C is collect

Answer:

I would need to see the diagram in order to answer properly

Answer:

It's all about understanding the concept, see my explanation.

Explanation:

A ionic bond is formed between a metal element and a non metal element always. On the other hand, a molecular bond or covalent bond is formed between 2 elements which are both non metals. A ionic bond is made when there is a electron transfer occurring meaning that one element is giving it's electron to another to ethier become a postive or negative ion. Whereas a molecular bond is made when two non metals elements share there electrons.

• An example of a ionic bond would be MgCl2 as we know magnesium is a metal and chlorine is a non metal.

• An example of a molecular bond would be NF

which we know are both non metals.

Answer:

20 moles of Iron are needed

Explanation:

In 1 mole of Iron (III) oxide, Fe₂O₃, there are 2 moles of Iron, Fe. The equation that we can write is:

2 moles Fe = 1 mole Fe₂O₃

To find the moles of iron that are needed to produce 10 moles of Fe₂O₃ we must use this equation as follows:

10 moles of Fe₂O₃ * (2 moles Fe / 1mole Fe₂O₃) =

Answer: The event air molecules that are surrounding the metal will speed up, and the molecules in the metal will slow down would most likely take place over the next few minutes.

Explanation:

A process in which heat is evolved is called an exothermic process.

When hot metal plate at [tex]150^{o}C[/tex] is placed in air at room temperature then heat is given off by the metal plate due to which there will occur a decrease in kinetic energy of its molecules.

As a result, molecules in the metal will slow down.

Whereas heat is absorbed by the air molecules from the metal due to which kinetic energy of air molecules will increase.

Thus, we can conclude that the event air molecules that are surrounding the metal will speed up, and the molecules in the metal will slow down would most likely take place over the next few minutes.

Explanation:

hope the picture above make sense:)

Answer:

90.26%

Explanation:

From the question given above, the following data were obtained:

Theoretical yield of AlCl₃ = 1551 g

Actual yield of AlCl₃ = 1400 g

Percentage yield =?

The percentage yield of the reaction can be obtained as follow:

Percentage yield = Actual yield / Theoretical yield × 100

Percentage yield = 1400 / 1551 × 100

Percentage yield = 140000 / 1551

Percentage yield = 90.26%

Thus, the percentage yield of the reaction is 90.26%

Answer:

See Explanation

Explanation:

We can write the molecular orbital configuration of molecules in the same way as we write the orbital electron configuration of atoms. The valence electrons in the molecule are filled into molecular orbitals of appropriate energy in accordance to the Aufbau principle.

For CO;

σ2s2, σ*2s2, Π2py2, Π2pz2, σ2px2

For NO;

σ2s2, σ*2s2, Π2px2, Π2py2, σ2pz2, Π*2px1

For CN-;

σ2s2, σ*2s2, Π2px2, Π2py2, σ2pz2

These are the ground state electron configurations of these molecules.

Answer:

3.84 J/g°C

Explanation:

Using the formula as follows:

Q = m × c × ∆T

Where;

Q = amount of heat (J)

m = mass of substance

c = specific heat of copper

∆T = change in temperature (°C).

Based on the provided information;

Q = 43783J

m = 24g

∆T = 500°C - 25°C = 475°C

c = ?

Using Q = m × c × ∆T

43783 = 24 × c × 475

43783 = 11400c

c = 43783 ÷ 11400

c = 3.84 J/g°C

Answer:

that is answer

Explanation:

symbol - elements - mass percent

S. - sulfur. - 21.945%

F. - fluorum. - 78.047%

When Magnesium comes in contact with Oxygen, it reacts with Oxygen causing a layer of Magnesium Oxide on the metal. If Magnesium is burnt, it will cause a bright white light creating Magnesium Oxide.

The initial appearance of Magnesium is a ribbon with a layer of Magnesium Oxide.

Happy to help :)

If you need any more help feel free to ask

Answer:

Ethylbenzoyl chloride | C9H9ClO

Answer:

13

Explanation:

1 proton/neutron has an atomic mass of 1. We ignore the electrons because they are too small. Protons and Neutrons have the same atomic mass, therefore the answer s 6+7=13

Answer:

1) 1.5 kg

2) 0.6 kg

Explanation:

[tex](3)(30) = 60m, m = 90/60 = 1.5[/tex] kg

[tex](0.8)(15) = 20m, m = 12/20 = 0.6[/tex] kg

Answer:

The answer is "Option 2".

Explanation:

Answer:

a)

For Methylcyclohexane  N₁ = 2770

For Methylcyclohexene N₂ = 2827

For Toluene N₃ = 2557

b) the standard deviation for the average in (a) is 143.31

c)

For Methylcyclohexane; H₁ = 0.01444 cm

For Methylcyclohexene; H₂ = 0.01415 cm

For Toluene; H₃ = 0.01564 cm

Explanation:

Given the data in the question;

Gas-liquid chromatography on a 40-cm packed column:

Compound                   tR, min                           W, min

Air                                   1.9                                    —

Methylcyclohexane      10.0                               0.76

Methylcyclohexene      10.9                               0.82

Toluene                        13.4                                1.06

a)

an average number of plates from the data;

To get the Number of plates N, we use the following expression;

N = 16( tR / W )², we use it for Methylcyclohexane, Methylcyclohexene and Toluene

-

For Methylcyclohexane  N₁ = 16( 10 / 0.76 )² = 16( 173.13 ) = 2770.08 ≈ 2770

-

For Methylcyclohexene N₂ = 16( 10.9 / 0.82 )² = 16( 176.7 ) = 2827.2 ≈ 2827

-

For Toluene N₃ = 16( 13.4 / 1.06 )² = 16( 159.8078 ) = 2556.9 ≈ 2557

b) standard deviation for the average in (a).

First we get the mean;

Mean N" = ( N₁ + N₂ + N₃ ) / 3 = ( 2770 + 2827 + 2557 ) / 3 = 8154 / 3 = 2718

Next we determine the deviation

d₁² = (N₁ - N")² = (2770 - 2718)² = (52)² = 2704

d₂² = (N₂ - N")² = (2827 - 2718)² = (109)² = 11881

d₃² = (N₃ - N")² = (2557 - 2718)² = (-161)² = 25,921

∴ ∑d²[tex]_i[/tex] = 40506

Standard Deviation S = √( ∑d²[tex]_i[/tex]  / ( n-1 ) )

Standard Deviation S = √( 40506 / ( 3-1 )

Standard Deviation S = √( 40506 / 2 )

Standard Deviation S = √( 20253 )

Standard Deviation S = 143.31

Therefore, the standard deviation for the average in (a) is 143.31

c)

an average plate height for the column

Given that; Gas-liquid chromatography on a 40-cm packed column, L = 40 cm

-

For Methylcyclohexane; H₁ = L/N₁ = 40 / 2770 = 0.01444 cm

-

For Methylcyclohexene; H₂ = L/N₂ = 40 / 2827  = 0.01415 cm

-

For Toluene; H₃ = L/N₃ = 40 / 2557 = 0.01564 cm

Answer:

oil based paint

Explanation:

Answer:

I WILL ACHIEVE GREATNESS

Explanation:

Answer:

.

Explanation:

Answer:

14.93 g

Explanation:

First we convert 1.2 x 10²³ atoms of arsenic (As) into moles, using Avogadro's number:

Then we can calculate the mass of 0.199 moles of arsenic, using its molar mass:

Thus, 1.2x10²³ atoms of arsenic weigh 14.93 grams.

Answer:

its e

Explanation:

Answer:

Explanation:

The density is  

1.1 g c m 3 .

Answer:

the molar mass for Fe and Cl