a person on a rotating stool with arms closer to the chest rotates at an angular speed of 7.5 rad/s. on stretching out the arms, the angular speed decreases to 5 rad/s. by what factor does the moment of inertia change?

Two of the correct statements regarding this are:
b) the distance between the maxima decreases
d) the distance between the minima increases

When monochromatic coherent light shines through a pair of slits, an interference pattern is created. This pattern is dependent on the distance between the slits. If the distance between the slits is decreased, the resulting interference pattern will be affected.

When the distance between the slits is decreased, the interference pattern becomes wider, and the distance between the maxima decreases. The distance between the minima, on the other hand, increases.

This is because the interference pattern is created by the interaction of waves, and when the distance between the slits is decreased, the waves interfere with each other differently.

This causes the pattern to shift and change. Therefore, the resulting interference pattern is affected by the distance between the slits.

To learn more about : minima

https://brainly.com/question/29512870

#SPJ11

A credit card can be held up to 1.04 cm away from the wire with a magnetic field of 1000 gauss.

We can use the formula for the magnetic field around a long, straight wire to calculate the magnetic field at a certain distance from the wire:

B = μ0I / (2pi*r)

where B is the magnetic field, μ0 is the permeability of free space (4pi10^-7 T*m/A), I is current, and r is the distance from the wire.

We want to find the maximum distance r such that the magnetic field is less than 1000 gauss (0.1 tesla). We can rearrange the formula to solve for r:

r = μ0I / (2pi*B)

Plugging in the values given, we get:

r = (4pi10^-7 Tm/A)(6.5 A) / (2pi0.1 T) = 1.04 cm

Therefore, a credit card can be held up to 1.04 cm away from the wire without damaging its magnetic strip, rounded to two significant figures.

Learn more about magnetic field

brainly.com/question/14848188

#SPJ11

Answer:

C.

Explanation:

When Venus surface get bit cold when weather hits the planet gets soupy clouds and etc.

Thermal energy is absorbed each hour is  13.53 x 10¹² J  and thermal energy lost per hour  is  7.092 x 10¹² J.

a technique of isothermal gas expansion that is reversible. In this process, the ideal gas in the system receives  amount heat from a heat source at a high temperature Thigh, expands and does work on surroundings. a technique of adiabatic gas expansion that is reversible. The system is thermally insulated throughout this process.

Temp_cold = 20°C + 273.15 = 293.15 K

Temp_hot = 425°C + 273.15 = 698.15 K

efficiency = 1 - (Temp_cold / Temp_hot)

                     = (698.15 K * 293.15 K) / (698.15 K)² - (293.15 K)²

efficiency = 0.524 or 52.4%

thermal energy absorbed/ hour = power output / efficiency

= 197 kW / 0.524

= 375.95 MJ/h  x 3.6 x 10⁶ J/kWh = 13.53 x 10¹² J

thermal energy is lost per hour

W = power output x time = 197 kW x 1 h = 197 kWh

W = 197 kWh x 3.6 x 10⁶ J/kWh = 7.092 x 10¹²1J

Since the engine is running in a cycle, the system's internal energy is equal to zero, hence U = 0.

Q = ΔU + W

hence, thermal energy lost per hour = Q = W = 7.092 x 10^11 J

To know more about thermal energy visit:-

https://brainly.com/question/27359499

#SPJ1

The magnitude of the velocity of the 6.0 kg mass after the collision is approximately 1.7 m/s.

We can solve this problem using conservation of momentum and conservation of kinetic energy. Conservation of momentum states that the total momentum of a system is conserved if there are no external forces acting on it. In this case, the system is the two masses.

Let p1 and p2 be the initial momenta of the 3.0 kg and 6.0 kg masses, respectively, and p1' and p2' be their final momenta after the collision. Since the 6.0 kg mass is initially at rest, we have:

p1 = m1v1 = (3.0 kg)(10 m/s) = 30 kg·m/s

p2 = m2v2 = (6.0 kg)(0 m/s) = 0 kg·m/s

After the collision, the 3.0 kg mass moves at an angle of 35° with a speed of 8.0 m/s. We can break its velocity into x- and y-components:

vx = v1' cos(35°) = 8.0 m/s cos(35°) ≈ 6.6 m/s

vy = v1' sin(35°) = 8.0 m/s sin(35°) ≈ 4.6 m/s

The total momentum of the system after the collision is:

p1' + p2' = m1v1' + m2v2'

We can use conservation of momentum to say that p1 + p2 = p1' + p2', so:

p1' + p2' = 30 kg·m/s

Substituting in the known values, we have:

(3.0 kg)(6.6 m/s) + (6.0 kg)v2' = 30 kg·m/s

Solving for v2', we get:

v2' = (30 kg·m/s - 19.8 kg·m/s) / 6.0 kg ≈ 1.7 m/s

To know more about velocity, here

https://brainly.com/question/17127206

#SPJ4

The technique of interferometry allows two or more telescopes to obtain the angular resolution of a single telescope much larger than any of the individual telescopes.

This is achieved by combining the signals received by the telescopes to create a single image with a higher resolution. Interferometry is especially useful for studying objects with small angular sizes, such as stars and planets.

Additionally, interferometry allows astronomers to make astronomical observations without interference from light pollution, as it can separate the signals from the object being observed from the background light.

However, interferometry does not directly determine the chemical composition of stars, although it can provide information about their temperature and other physical properties.

Learn more about interferometry:

https://brainly.com/question/30054443

#SPJ11

The drawing provided by the manufacturer, which details the permitted interconnections between intrinsically safe and associated apparatus or between nonincendive field wiring apparatus or associated nonincendive field wiring apparatus, is called a wiring diagram.

A wiring diagram typically includes detailed information about the wiring connections between components, as well as any necessary safety measures such as grounding or shielding. It may also include information about the voltage, current, and power requirements of the system, as well as any limitations or restrictions on the use of particular components or configurations.

This diagram is a critical part of the installation and maintenance process for intrinsically safe and nonincendive electrical systems, as it helps ensure that the correct connections are made and that the system operates safely and effectively.

To learn more about diagram follow the link:

https://brainly.com/question/11729094

#SPJ4

The complete question is:

A drawing, provided by the manufacturer, that details permitted interconnections between the intrinsically safe and associated apparatus or between the nonincendive field wiring apparatus or associated nonincendive field wiring apparatus is called a ______________

To play G note (392 Hz) on a guitar string, place the fret and your finger at a distance of approximately 40.4 cm (or 16 inches) from the nut of the guitar.

The distance that the fret and your finger must be placed from the nut of the guitar is determined by the length of the string that is allowed to vibrate when the string is plucked. The length of the vibrating string determines the frequency of the sound produced by the guitar string.

The distance from the nut of the guitar to the fret that must be placed to play a G note with a frequency of 392 Hz can be calculated using the formula:

[tex]L = (v / 2f) * (n^2 - 1)[/tex]

where L is the length of the string from the nut to the fret, v is the velocity of the wave (which is dependent on the tension and mass per unit length of the string), f is the frequency of the note, and n is the fret number (with n=1 corresponding to the distance from the nut to the first fret).

For a standard guitar tuning and using typical values for the velocity of the wave and string tension, the distance from the nut to the third fret would be approximately 40.4 cm to play a G note with a frequency of 392 Hz.

Learn more about The distance

https://brainly.com/question/15172156

#SPJ4

Answer:

time of flight=( 2U sinx ) ÷ g

Explanation:

a)

u=73.5m/s , x= 20° , g =10m/s^2 then t= {2×73.5 × sin 20°} ÷ 10 = 134.2 ÷ 10 = 13.42 sec b) range is the distance, range= (u^2 sin 2 x ) ÷g = ({73.5 }^2 × sin 2 × 20 )÷ 10 =4025.3÷10 = 402.53meters. I couldn't finish the question so sorry

The downward force of the atmosphere on the book is equal to the pressure of the atmosphere multiplied by the surface area of the book's cover and it is calculated to be 5 N.

Atmospheric pressure is the pressure exerted by the weight of the Earth's atmosphere on objects on or near the surface of the Earth. It is caused by the gravitational attraction of the Earth on the gases in the atmosphere. The atmospheric pressure varies with altitude, temperature, and weather conditions, and is typically measured in units of pressure such as pascals (Pa) or kilopascals (kPa).

Force = Pressure x Area

Where:

Pressure = 100 kPa (given)

Area = 0.05 m² (given)

Substituting the given values, we get:

Force = 100 kPa x 0.05 m²

Force = 5 N

Therefore, the downward force of the atmosphere on the book is 5 N.

To know more about atmospheric pressure, visit:

https://brainly.com/question/30166820

#SPJ1

The largest value of I_max that the breaker can carry is approximately 21.21 A.

Given a circuit breaker rated for 15 A RMS at 240 V RMS, we want to find the largest value of Imax (maximum current) that the breaker can carry. To do this, we'll use the following formula:

I_max = √2 * I_RMS

Where I_RMS is the rated current in RMS, which is 15 A in this case.

Substitute the value of I_RMS into the formula:
Imax = √2 * 15 A

Calculate the value of Imax:
Imax ≈ 21.21 A

Therefore approximately 21.21 A is the largest value of Imax that the breaker can carry.

More on circuit breaker: https://brainly.com/question/29480920

#SPJ11

The VCE voltage drop in saturation for a typical BJT can be assumed to be between 0.1V and 0.3V.

The voltage drop across the collector and emitter (VCE) of a bipolar junction transistor (BJT) when it is in saturation depends on several factors such as the type of BJT, the collector current, and the biasing conditions.

However, as a general rule of thumb, the VCE voltage drop in saturation for a typical BJT can be assumed to be between 0.1V and 0.3V, depending on the specific characteristics of the transistor. This value may vary based on the operating conditions and the specific transistor used.

It's worth noting that the VCE voltage drop in saturation is typically lower than the voltage drop in the active region, where the BJT behaves as a current amplifier. In the active region, the VCE voltage drop can range from a few tenths of a volt up to several volts, depending on the transistor's characteristics and operating conditions.

Learn more about voltage drop

brainly.com/question/31431320

#SPJ11

The right response is resting tremor (option b). A patient may have spasticity, autonomic dysreflexia, and orthostatic hypotension following a spinal cord injury (SCI). SCI is not often linked to resting tremor.

SCI can interfere with the body's ability to communicate with the brain, leading to a variety of physical symptoms. Spasticity, which manifests as stiffness, muscle spasms, and increased muscle tone, is a frequent consequence. Patients with SCI at or above the T6 level may develop autonomic dysreflexia, a potentially fatal illness that is characterised by an abrupt rise in blood pressure. When someone stands up, their blood pressure drops, causing lightheadedness and dizziness. This condition is known as orthostatic hypotension.

While essential tremor, Parkinson's disease, and other neurological illnesses are frequently linked to resting tremor, SCI is not typically one of them.

learn more about  autonomic dysreflexia here:

https://brainly.com/question/30331093

#SPJ11

The right response is resting tremor (option b). A patient may have spasticity, autonomic dysreflexia, and orthostatic hypotension following a spinal cord injury (SCI). SCI is not often linked to resting tremor.

SCI can interfere with the body's ability to communicate with the brain, leading to a variety of physical symptoms. Spasticity, which manifests as stiffness, muscle spasms, and increased muscle tone, is a frequent consequence. Patients with SCI at or above the T6 level may develop autonomic dysreflexia, a potentially fatal illness that is characterised by an abrupt rise in blood pressure. When someone stands up, their blood pressure drops, causing lightheadedness and dizziness. This condition is known as orthostatic hypotension.

While essential tremor, Parkinson's disease, and other neurological illnesses are frequently linked to resting tremor, SCI is not typically one of them.

learn more about  autonomic dysreflexia here:

brainly.com/question/30331093

#SPJ4

The mean temperature of her child with the following results 97.3°F, 98.0°F, 99.0°F, and 97.7°F is 98° F

The mean temperature is also known as the average of the temperature taken by her with the digital thermometer. The digital thermometer is used to measure the temperature of the body by placing it either orally or axially.

The mean temperature is calculated as the ratio of the sum of all the temperatures recorded and the number of times the frequency with which temperature is recorded.

It can be written as = [tex]= \frac{T_1+T_2+....T_N}{N}[/tex]

where N is the number of observations

Therefore mean temperature

[tex]=\frac{97.3+98.0+99.0+97.7}{4}\\\\=\frac{392}{4}\\\\[/tex]

=98° F

To know more about Mean:

https://brainly.com/question/26941429

#SPJ4

Your classmate's mean temperature is 98°F.

Solution - Hi! To calculate the mean temperature of your classmate after using the digital thermometer, follow these steps:

1. Add up the temperatures: 97.3°F + 98.0°F + 99.0°F + 97.7°F = 392°F
2. Count the number of temperature readings: 4
3. Divide the total temperature by the number of readings: 392°F / 4 = 98°F

Your classmate's mean temperature is 98°F.

to learn more about mean, click on this -

brainly.com/question/30214653

#SPJ11

The reasons that a promontory will be more vulnerable to wave erosion than a bay;- Waves bend around a promontory and strike it from both sides,- Powerful waves focus most of their energy at a promontory and - A promontory will receive more wave action than a bay.

A promontory is more vulnerable to wave erosion than a bay due to the following reasons:

1. Waves bend around a promontory and strike it from both sides: This phenomenon, called wave refraction, concentrates the wave energy on the promontory, making it more prone to erosion.

2. A promontory will receive more wave action than a bay: Bays are generally more sheltered and have a lower exposure to waves, whereas promontories are exposed to the full force of waves, leading to more erosion.

3. Powerful waves focus most of their energy at a promontory: Due to the shape of the coastline, waves tend to focus their energy on the headlands, like promontories, which makes them more vulnerable to erosion compared to bays.

More on promontory: https://brainly.com/question/29758672

#SPJ11

The correct answer is option D) When the fox eats an animal that eats plants, it receives energy indirectly from the sun.

Energy in a food chain flows from the sun, to the producers (plants), to the primary consumers (herbivores), to the secondary consumers (carnivores), and so on. Omnivores, such as foxes, consume both plants and animals, but they typically obtain more of their energy from consuming other animals.

When a fox eats an animal that eats plants, it is receiving energy indirectly from the sun. The plants that the prey animal consumed converted the energy from the sun into organic molecules through the process of photosynthesis. The prey animal then consumed those plants and converted the organic molecules into its own tissues. When the fox eats the prey animal, it is obtaining the energy stored in the prey's tissues.

Learn more about the food chain here:

https://brainly.com/question/7564953

#SPJ1

Potable water is fit for drinking. Option E

Potable water is water that is safe for human consumption and considered fit for drinking. It is free from harmful bacteria, viruses, chemicals, and other contaminants that can cause health problems.

Potable water can come from different sources such as groundwater, surface water, or treated wastewater, and it is typically treated and disinfected to ensure its safety before being distributed to consumers.

Portable water isn't known as industrial wastewater, irrigation water, groundwater and sewage.

Find more exercises on portable water;

https://brainly.com/question/2570757

#SPJ1

When a bow is drawn and has 40 J of potential energy, the arrow's kinetic energy when fired will be:

Your answer: d. 40 J

Explanation:

Potential energy is the energy that an object possesses due to its position, configuration, or state of being. It is stored energy that has the potential to do work in the future. The amount of potential energy that an object has depends on its position or configuration relative to other objects or systems. For example, a bow that is pulled back has potential energy that can be released as kinetic energy when it is released.

Kinetic energy, on the other hand, is the energy that an object possesses due to its motion. It is the energy that an object possesses because it is in motion and is able to do work by causing a change in another object's motion or position. The amount of kinetic energy that an object has depends on its mass and its velocity. For example, a moving car has kinetic energy that can be transferred to another object if it collides with it.

When the bow is drawn, it stores potential energy. When fired, this potential energy is converted into kinetic energy for the arrow. In an ideal situation with no energy loss, the arrow's kinetic energy will be equal to the bow's potential energy. Therefore, the arrow will have a kinetic energy of 40 J.

To learn more about Potential Energy and Kinetic Energy. Please Visit:

https://brainly.com/question/30176483

#SPJ11

The nonconservative work done on the surfer is 2845.5 J.

We can use the work-energy theorem to solve this problem. The work-energy theorem states that the net work done on an object is equal to its change in kinetic energy. In this case, we can calculate the initial and final kinetic energies of the surfer and find the difference, which will give us the net work done.

The initial kinetic energy of the surfer is:

[tex]K_i = (1/2) * m * v_i^2[/tex]

[tex]K_i = (1/2) * 73.2 kg * (1.44 m/s)^2[/tex]

K_i = 75.7 J

The final kinetic energy of the surfer is:

[tex]K_f = (1/2) * m * v_f^2[/tex]

[tex]K_f = (1/2) * 73.2 kg * (8.89 m/s)^2[/tex]

K_f = 2921.2 J

The change in kinetic energy is:

ΔK = K_f - K_i

ΔK = 2921.2 J - 75.7 J

ΔK = 2845.5 J

According to the work-energy theorem, this change in kinetic energy must be equal to the net work done on the surfer. Therefore, the nonconservative work done on the surfer is:

W_nc = ΔK

W_nc = 2845.5 J

So, the nonconservative work done on the surfer is 2845.5 J.

Learn more about   nonconservative work

https://brainly.com/question/28588859

#SPJ4

To answer this question, more context is needed, since force can be exerted by one object on another object. In this case, the body receiving the force would be the object that receives the force, that is, the object on which the force is being exerted. For example, if a person pushes a box, the receiving body of the force would be the box, since it is receiving the force exerted by the person.

Answer:

The question is not quite clear but the receiving body of a force will be the object on which the force is being exerted upon. Hope this helps.

m_c (mass of cylinder)=50 kg

d=25 cm so r=12.5 cm = 0.125 m m_b

(mass of bucket)=20 kg

So using the equations: RT = � = I � RT= I � (m_b)g-T= (m_b)aR And from what I understand, this is the same as the tangential acceleration? (m_b)g-T=(m_b) � r = F T= ( i � ) / r (m_b)g -(( i � ) / r ) = m � r � ( ((m_b)r) + (I /R ) ) = (m_b)g Leaving us with the final : � = ((m_b)g)/(((m_b)r) + (I /r)) Using this equation, I found I = 0.390625 and the final answer would be 35 rad/s^2 Sorry for such a long post--this is my first time on the website and I read the rules so hopefully I've done everything correctly! Thank you all!

/

The peak electric field 10 km from the transmitter is approximately 15.435 mV/m.

To find the peak electric field 10 km from the transmitter, we can use the inverse square law.

This law states that the intensity of a wave (such as the electric field in this case) is inversely proportional to the square of the distance from the source.

Here's a step-by-step explanation:

1. Note the initial distance (d1) and electric field (E1):

d1 = 2.1 km, E1 = 350 mV/m.

2. Convert d1 to meters:

d1 = 2100 m.

3. Note the final distance (d2):

d2 = 10 km.

4. Convert d2 to meters:

d2 = 10,000 m.

5. Use the inverse square law formula:

E2 = E1 * (d1²) / (d2²).

6. Plug in the values:

E2 = 350 * (2100²) / (10,000²).

7. Calculate E2:

E2 ≈ 15.435 mV/m.

Learn more about electric field:

https://brainly.com/question/14372859

#SPJ11

The minimum coefficient of static friction between block 1 and block 2 is (F-f-m*a)/g, which can be calculated by equating the horizontal forces acting on block 1.

The minimum coefficient of static friction between block 1 and block 2 can be calculated by equating the forces acting on block 1 in the horizontal direction. Since block 1 and block 2 have the same acceleration, the net force on block 1 is:

F - f - μ_smg = m*a

where F is the force applied to block 3, μ_s is the coefficient of static friction between block 1 and block 2, and g is the acceleration due to gravity.

Since block 1 and block 2 have the same mass, we can simplify the above equation to:

F - f -  = ma

Solving for μ_s, we get:

μ_s = (F - f - m*a)/g

Therefore, the minimum coefficient of static friction between block 1 and block 2 is (F - f - m*a)/g.

Learn more about Minimum coefficient

brainly.com/question/31157416

#SPJ11

The option A is  best representation of the path that the ball would take after the string breaks.

When the string of a pendulum breaks, the ball's path will follow the laws of motion, specifically the law of conservation of energy. As the ball was halfway to its highest position, it had a certain amount of potential energy.

When the string broke, this potential energy would convert to kinetic energy, causing the ball to move in a straight line tangent to the point where the string broke.

Therefore, the path that the ball would take after the string breaks would be a straight line away from the pivot point of the pendulum, as shown in option A. The other paths shown do not follow the laws of motion and do not account for the conservation of energy. Option (A) is the correct answer.

To learn more about : string

https://brainly.com/question/24994188

#SPJ11

Note the full question is

A pendulum is swinging upward and is halfway toward its highest position, as shown, when the string breaks. which of the paths shown best represents the one that the ball would take after the string breaks?

A) A

B) B

C) C

D) D

E) E

The kinetic energy in Schrödinger's equation for the H2 molecule includes contributions from both electrons and nuclei. Thus the correct option is C.

The kinetic energy term in Schrödinger's equation for the H2 molecule refers to the energy involved in the motion of the particles. The H2 molecule comprises two hydrogen nuclei and two electrons, therefore the electrons and the nuclei both contribute to the kinetic energy.

The nuclei contribute to the kinetic energy by their mobility, whereas the electrons do so through their wave-like behaviour. The H2 molecule's kinetic energy term in Schrödinger's equation includes contributions from both electrons and nuclei, making option C the right response.

Learn more about kinetic energy:

https://brainly.com/question/30285686

#SPJ4

The kinetic energy in Schrödinger's equation for the H2 molecule includes contributions from both electrons and nuclei. Thus the correct option is C

explanation - For Schrödinger's equation of the H2 molecule, the kinetic energy has contributions from both electrons and nuclei. This is because the kinetic energy term in the equation accounts for the motion of all particles in the system, which in this case includes both the electrons and nuclei of the H2 molecule. Therefore, options a, b, and d are incorrect.

To know more about the schrodinger equation, click on this -

brainly.com/question/31441754

#SPJ11

Answer: hope it helps

Explanation:

A protostar becomes a main sequence star when its core temperature exceeds 10 million K. This is the temperature needed for hydrogen fusion to operate efficiently.

B. Power supplies are rated for efficiency based on watts. The efficiency of a power supply is determined by the ratio of its output power (in watts) to its input power (also in watts).

The lesser the  effectiveness, the  lower power is wasted as heat and the lesser the power given to the computer's  factors.   In addition to  effectiveness, power  inventories are rated for maximum affair power, which is generally expressed in watts. This standing represents the loftiest  quantum of power that the power  force can deliver to the computer's  factors.  

Other conditions,  similar as voltage and amperage conditions for their different affair connections, may be assigned to power  inventories. The maximum voltage and current that the power  force can produce on each connection are indicated by these conditions. Ohms, on the other hand, are a resistance unit that's infrequently used to grade power  force.

Learn more about power at

https://brainly.com/question/30562600

#SPJ4

First, we need to find the total mass of the system by adding the masses of the two objects: m_total = m1   m2 = 50.0 kg   75.0 kg = 125.0 kg  Next, we can plug in the given force and mass values into the equation: F = ma 40.0 N = 125.0 kg * a  Solving for a: a = 40.0 N

125.0 kg * a

Solving for a:

a = 40.0 N / 125.0 kg

a = 0.32 m/s^2

Therefore, the acceleration of the system is 0.32 m/s^2.

To lift this weight, you would need a force greater than or equal to 3,920 N (assuming you are lifting it vertically).

weight = [tex]1 m^3 \times 400 kg/m^3 \times9.8 m/s^2[/tex]

weight = 3,920 N

Force is a physical quantity that describes the interaction between objects or systems. The SI unit of force is the Newton (N), which is defined as the amount of force required to accelerate a one kilogram mass at a rate of one meter per second squared.

Force is also responsible for deformations in solid objects, such as stretching or compressing a spring. Nuclear forces are responsible for the interactions between subatomic particles, and frictional forces are the forces that resist motion when two surfaces come into contact. Gravitational force is the force that pulls objects towards each other due to their masses. Electromagnetic force is responsible for the interactions between charged particles, such as in electricity or magnetism.

To learn more about Force visit here:

brainly.com/question/24115409

#SPJ4

Color: Both the bromine gas and steak have a brownish color.

Bromine gas is a reddish-brown, nonflammable, and highly toxic gas with a very strong, unpleasant odor. It is composed of two heavy, diatomic, halogen molecules, Br2, and is the only nonmetal element that exists as a liquid at room temperature. Bromine gas is denser than air and is soluble in water and organic solvents.

Texture: The bromine gas is a gas and therefore has no texture, while the steak is solid and has a firm texture.
Temperature: The bromine gas is a gas and therefore has a lower temperature than the steak, which is at room temperature.
Bromine Gas and Juice:
Color: The bromine gas is brownish and the juice is a yellowish or orange color.
Texture: The bromine gas is a gas and therefore has no texture, while the juice is a liquid and has a smooth texture.
Temperature: The bromine gas is a gas and therefore has a lower temperature than the juice, which is at room temperature.

To learn more about bromine gas
https://brainly.com/question/1126306
#SPJ1