a person swims 11 miles downriver in the same time they can swim 7 miles upriver. the speed of the current is 4 miles per hour. find the speed of the person in still water.

This equation tells us that the distance the bus travels is directly proportional to the time it travels at a constant speed of 15m/s.

What is speed?

Speed is the method of measuring how quickly an object moves from one place to another. It is a scalar quantity that expresses the rate of change of distance over time. In other words, it is the distance traveled per unit of time.

If the bus is traveling at a constant speed of 15m/s, then its acceleration is 0m/s². Therefore, we can use the formula for distance traveled at constant speed:

distance = speed × time

In this case, the speed of the bus is 15m/s, so the equation for the distance the bus travels in time (t) is:

distance = 15t

This equation tells us that the distance the bus travels is directly proportional to the time it travels at a constant speed of 15m/s.

To learn more about speedvisit the link:

https://brainly.com/question/13943409

#SPJ1

The option that best describes the data is the option;

Dependent and independent data refers to the relationship between two sets of data.

The specified data in the table indicates;

The data obtained from an household in January is located directly on top the data obtained from the same household in June.

The heating bill depends on the amount of energy used in an household.

The amount of energy used in each household depends on the heating requirement of the household, such that the heating bill for an household in January is related to the heating bill for the same household in June

The correct option is therefore;

The data are related because the heating bills in January and June came from the same households.

Learn more on analysis of data here: https://brainly.com/question/14577612

#SPJ1

a) The percentage of batteries the company expects to replace is:

0.1271 * 100% = 12.71%

b) The company should guarantee the batteries for 34 months (rounded to the nearest month) to ensure that refunds are not made for more than 9% of its batteries under the full-refund guarantee policy.

(a) Let X be the random variable representing the life of a battery. We want to find the probability that a battery fails within 36 months after purchase, which is equivalent to finding P(X ≤ 36).

Using the normal distribution formula with mean μ = 44 months and standard deviation σ = 7 months, we have:

Z = (X - μ) / σ = (36 - 44) / 7 = -1.14

Using a standard normal table or calculator, we find that the probability of a standard normal variable being less than or equal to -1.14 is 0.1271. Therefore, the percentage of batteries the company expects to replace is:

0.1271 * 100% = 12.71% (rounded to two decimal places)

(b) Let Y be the random variable representing the length of the guarantee period in months. We want to find the value of Y such that P(X ≤ Y) = 0.09, where X has the same normal distribution with mean μ = 44 months and standard deviation σ = 7 months.

Using the inverse normal distribution formula with mean μ = 44 months and standard deviation σ = 7 months, we have:

Z = invNorm(0.09) = -1.34

where invNorm is the inverse normal function. Solving for Y, we have:

(Y - μ) / σ = Z

(Y - 44) / 7 = -1.34

Y - 44 = -1.34 * 7

Y ≈ 34.42

Therefore, the company should guarantee the batteries for 34 months (rounded to the nearest month) to ensure that refunds are not made for more than 9% of its batteries under the full-refund guarantee policy.

Learn more about percentage of batteries.

brainly.com/question/17086286

#SPJ11

In a right triangle, tangent of one of non-right angles is equal to  ratio of the length of opposite side to the length of  adjacent side. The tangent of angle M is 5/3.

In this case, we want to find  tangent of angle M.

Let's label the sides of  triangle opposite, adjacent, and hypotenuse, as follows:

Opposite: side LM, which is opposite to angle M.

Adjacent: side MN, which is adjacent to angle M.

Hypotenuse: side LN, which is the longest side and opposite to the right angle N.

Using the Pythagorean theorem, we can find the length of the hypotenuse LN:

[tex]LN^2 = LM^2 + MN^2 \\LN^2 = 10^2 + 6^2\\LN^2 = 100 + 36\\LN^2 = 136LN = sqrt(136) = 2*sqrt(34)[/tex]

Now, we can use the tangent formula:

tan(M) = opposite/adjacent = LM/MN

tan(M) = 10/6 = 5/3

To know more about Pythagorean theorem, here

brainly.com/question/28361847

#SPJ4

We verified that the associative property of addition holds for the given expression below

Let's verify the associative property of addition for the given expression:

2/3 + (3/4 + 1/5) = (2/3 + 3/4) + 1/5

We can simplify both sides of the equation by finding a common denominator for the fractions:

2/3 + (3/4 + 1/5) = (2/3 + 3/4) + 1/5

Multiplying 2/3 by 20/20, we get:

40/60 + (3/4 + 1/5) = (2/3 + 3/4) + 1/5

Multiplying 3/4 by 15/15, we get:

40/60 + 45/60 + 1/5 = (2/3 + 3/4) + 1/5

Combining the first two terms on the left-hand side, we get:

85/60 + 1/5 = (2/3 + 3/4) + 1/5

Simplifying the fraction 85/60, we get:

17/12 + 1/5 = (2/3 + 3/4) + 1/5

Multiplying 2/3 by 4/4, we get:

17/12 + 1/5 = (8/12 + 9/12) + 1/5

Combining the fractions in the parentheses, we get:

17/12 + 1/5 = 17/12 + 1/5

Since both sides of the equation are equal, we have verified that the associative property of addition holds for the given expression:

2/3 + (3/4 + 1/5) = (2/3 + 3/4) + 1/5.

Read more about epression at

https://brainly.com/question/15775046

#SPJ1

[tex]\sin(X )=\cfrac{\stackrel{opposite}{36}}{\underset{hypotenuse}{45}}\implies \sin(X )=\cfrac{4}{5} \\\\\\ \cos(X )=\cfrac{\stackrel{adjacent}{27}}{\underset{hypotenuse}{45}}\implies \cos(X)=\cfrac{3}{5} \\\\\\ \tan(X )=\cfrac{\stackrel{opposite}{36}}{\underset{adjacent}{27}}\implies \tan(X)=\cfrac{4}{3}[/tex]

The probability of heads is 3 times that of tails, so the probability of heads is 0.75 and the probability of tails is 0.25.

Assign a probability of 0.5 to heads

Assign a probability of 0.25 to tails

When a biased coin is tossed the probability of heads is three times as likely to come up as tails.

To find the probability that should be assigned to the outcome of heads and tails the first step is to calculate the probability of heads.

Once this is done,

The probability of heads can be assigned a value of 0.5 and the probability of tails can be assigned a value of 0.25.

After that,

The probability of heads and tails can be calculated accordingly.

The probability of heads and tails when a biased coin is tossed, the first step is to calculate the probability of heads.

Once this is done the probability of heads can be set to 0.5 and the probability of tails can be set to 0.25.

With these probabilities assigned the probability of heads is three times that of tails.

For similar question on probability:

https://brainly.com/question/30034780

#SPJ11

Joel cannot make a right triangle with the current lengths of fencing.

A right triangle is a triangle that has one angle that measures exactly 90 degrees (a right angle). This means that the other two angles of the triangle are acute (measuring less than 90 degrees). The side opposite the right angle is called the hypotenuse, and it is always the longest side of the triangle. The other two sides are called the legs of the triangle.

To check if Joel can make a right triangle with the current lengths of fencing, we can use the Pythagorean theorem, which states that in a right triangle, the sum of the squares of the lengths of the two shorter sides (legs) is equal to the square of the length of the longest side (hypotenuse).

So, let's check if the measurements satisfy the Pythagorean theorem:

8²  + 15² = 64 + 225 = 289

20²  = 400

According to the Pythagorean theorem, a triangle with sides of length 8 ft, 15 ft, and 20 ft would be a right triangle if it satisfies the equation a²  + b²  = c² , where a and b are the shorter sides (legs) and c is the longest side (hypotenuse). However, in this case, we can see that the sum of the squares of the shorter sides (8²  + 15² ) is not equal to the square of the longest side (20² ), so the measurements cannot form a right triangle.

Therefore, Joel cannot make a right triangle with the current lengths of fencing.

To know more about right triangle visit:

https://brainly.com/question/29869536

#SPJ1

Answer:

22√5

Step-by-step explanation:

√20=√4x5 = √4 x √5 = 2√5

√45 = √9 x 5 = √9 x √5 = 3√5

√80 = √16 x 5 = √16 x √5 = 4√5

4√20 = 6 √45 - √80 = 4(2√5) + 6(3√5)- 4√5

8√5 + 18√5 - 4√5 = 22√5

So its 22√5

Answer:

[tex]22 \sqrt{5} [/tex]

Step-by-step explanation:

the explaination is avaliable in the picture i sent you

and please give me branliest

Answer:

26

Step-by-step explanation:

You just divide 133 and 5 and you get 26.6

Answer:

26

Step-by-step explanation:

[tex]\frac{133}{5}[/tex] = 26.6

You cannot buy part of a book, so you can buy 26 books

26 x 5 = 130.  You will have $3.00 left over.

Helping in the name of Jesus.

The area of the trapezoid is 72 square meters.

In order to find the area of a trapezoid, we need to use the formula:

Area = (b1 + b2) x h / 2

where b1 and b2 are the lengths of the parallel sides, and h is the height of the trapezoid.

In this case, we are given the lengths of the parallel sides as 6m and 12m respectively, and the height of the trapezoid is 4m.

So, we can plug these values into the formula to get:

Area = (6m + 12m) x 4m / 2

Area = 18m x 4m Area = 72m²

To know more about trapezoid here

https://brainly.com/question/8643562

#SPJ4

Complete Question:

Find the area of the trapezoid.

Base 1 = 6 m

Height = 4 m

Base 2 = 12 m

The equation (5 x 10⁶) (9 × 10⁻²) = 6 x 10⁴ when written in scientific notation. The value of b is 5 and the value of n is 4.

Scientific notation is a way of expressing numbers that are too large or too small to be conveniently written in standard decimal form. The number is written in the form of a number between 1 and 10 multiplied by a power of 10.

The value of b in this equation is 5. This is because the decimal points in both terms must be aligned in order to multiply them together.

The decimal points in each term are 6 and 2, respectively.

Since 6 is greater than 2, the decimal point for the total must be aligned with 6.

This means that the number 5 must be multiplied by 10⁶, resulting in b being 5.

The value of n in this equation is 4. This is because when the two terms are multiplied together, the exponents must be added.

The exponents of 10 in each term are 6 and -2, respectively.

When these are added together, they equal 4, resulting in the exponent of 10 in the new term to be 4.

Therefore, the equation (5 x 10⁶) (9 × 10⁻²) = 6 x 10⁴ when written in scientific notation. The value of b is 5 and the value of n is 4.

For more questions related to exponent

https://brainly.com/question/13669161

#SPJ1

Answer: The formula for the surface area of a cylinder is:

SA = 2πr^2 + 2πrh

where SA is the surface area, r is the radius, and h is the height.

In this case, we know that the surface area is 936π square meters and the radius is 13 meters. So we can plug those values into the formula and solve for h:

936π = 2π(13^2) + 2π(13)(h)

Simplifying:

936π = 338π + 26πh

936π - 338π = 26πh

598π = 26πh

h = 598/26 = 23

Therefore, the height of the cylinder is 23 meters.

Step-by-step explanation:

Step-by-step explanation:

you made some mistakes with the formula.

the surface area of a cylinder is

the outside mantle area

+

the 2 circle areas on top and bottom.

the outside mantle area is

2×pi×radius×height

the 2 circle areas are

2 × pi×radius²

in total that is

2×pi×radius×height + 2×pi×radius² =

2×pi×radius×(height + radius) = 936pi

2×pi×13×(height + 13) = 936pi

pi×(height + 13) = 36pi

height + 13 = 36

height = 36 - 13 = 23 m

Answer:

Step-by-step explanation:

True. A cartesian join, also known as a cross join, returns all possible combinations of rows between two tables. In this scenario, since table a contains two rows and table b contains eight rows, there will be 2 x 8 = 16 possible combinations or rows in the result set.

When a Cartesian join is used to link two tables, it creates a combination of all possible rows between the two tables. In this case, table A has 2 rows and table B has 8 rows. To calculate the number of rows in the result, you simply multiply the number of rows in each table:

2 rows (table A) x 8 rows (table B) = 16 rows

So, when a Cartesian join is used to link table A with 2 rows to table B with 8 rows, there will be 16 rows in the result.

To learn more about cartesian join : brainly.com/question/31201318

#SPJ11

The statement "if a cartesian join is used to link table a which contains two rows to table b which contains eight rows, there will be sixteen rows in the results" is a true statement.

What is a Cartesian join?

A Cartesian join, also known as a cross join or a cross product, generates a result set that combines every row from the first table with every row from the second table, with no requirements or limits.

If table A has two rows and table B has eight rows, a Cartesian join between the two tables will yield a result set with 16 rows (the product of the number of rows in each table).

So the statement "if a Cartesian join is used to link table A with two rows to table B with eight rows, the results will have sixteen rows" is valid.

Learn more about Cartesian join:

https://brainly.com/question/30340085

#SPJ4

The differential of the function Z is -4e⁻⁴ˣcos(4πt) - 4πsin(4πt)e⁻⁴ˣ

To find the differential function of Z = e⁻⁴ˣ cos(4πt), we will use the product rule of differentiation. The product rule states that the derivative of the product of two functions is equal to the first function multiplied by the derivative of the second function plus the second function multiplied by the derivative of the first function.

Let's apply the product rule to our function Z:

First, we differentiate the first function e⁻⁴ˣ with respect to x. The derivative of e⁻⁴ˣ is -4e⁻⁴ˣ.

Next, we differentiate the second function cos(4πt) with respect to t. The derivative of cos(4πt) is -4πsin(4πt).

Therefore, the differential function of Z is:

dZ/dt = -4e⁻⁴ˣcos(4πt) - 4πsin(4πt)e⁻⁴ˣ

To know more about differential function here

https://brainly.com/question/30074964

#SPJ4

Formula:

98% Confidence Interval = (Mean - (2*Standard Deviation/√n), Mean + (2*Standard Deviation/√n))

98% Confidence Interval = ($775 - (2*$110/√45), $775 + (2*$110/√45))

98% Confidence Interval = ($735.56, $814.44)

The probability of reaching into the bucket and randomly drawing three balls numbered 4, 9, and 7 without replacement, in that order, is 1/990, which is a decimal rounded to the nearest millionth is 0.001.

The probability of drawing three balls numbered 4, 9, and 7 without replacement, in that order, can be found by multiplying the probabilities of drawing each ball in the correct order.

The probability of drawing the first ball, numbered 4, is 1/11, since there is only one ball numbered 4 out of 11 balls in the bucket.

After the first ball is drawn, there are 10 balls remaining in the bucket, and the probability of drawing the second ball, numbered 9, is 1/10, since there is only one ball numbered 9 remaining out of the 10 balls in the bucket.

After the first two balls are drawn, there are 9 balls remaining in the bucket, and the probability of drawing the third ball, numbered 7, is 1/9, since there is only one ball numbered 7 remaining out of the 9 balls in the bucket.

Therefore, the probability of drawing the balls numbered 4, 9, and 7 without replacement, in that order, is:

(1/11) * (1/10) * (1/9) = 1/990

To learn more about probability click on,

https://brainly.com/question/31061937

#SPJ4

Answer:

The area of Jack's rhombus is four times the area of Soshi's rhombus.

Step-by-step explanation:

First, calculate the area of Soshi's rhombus. Use the formula for the area of a rhombus:

[tex]A = bh=\\A=(12)(10)=\\A=120[/tex]

Now, we have the Soshi's rhombus is 120 [tex]in^2[/tex].

Jack's rhombus' base and height are double those of Soshi's; multiply each value by two.

[tex]12*2=24\\\\10*2=20[/tex]

Now, substitute the values in the formula for the area of a rhombus:

[tex]A = bh=\\A=(24)(20)=\\A=480[/tex]

Notice that 480 is 4 times 120.

This is because area is a two-dimensional measure (measured in units squared, like [tex]in^2[/tex]) while length is a one-dimensional measure (measured in regular units, like cm and in), The one-dimensional measures of Jack's rhombus are double those of Soshi's, and to translate this to the two-dimensional measure of area, square 2 (2 squared is 2 times 2).

2 squared is 4, so:

the area of Jack's rhombus is four times that of Soshi's.

There have been numerous cases of athletes being accused of using performance-enhancing drugs, and the numbers may vary depending on the sport, country, and time period in question.

Additionally, determining how many athletes were using or not using performance-enhancing drugs would require specific information on individual cases.

Regarding the percentage of athletes falsely accused of using performance-enhancing drugs, it is difficult to determine an accurate figure without examining each case in detail. False accusations may occur due to various reasons, such as flawed testing procedures or contaminated supplements, and the percentage of false accusations may vary depending on the situation.

If you have a specific case or sport in mind, I can try to provide you with more information on that topic.

For more questions like drugs visit the link below:https://brainly.com/question

#SPJ11

Organizational skills

Organizational skills and the ability to communicate effectively are crucial for a systems analyst who needs to work with individuals at all levels of an organization, manage conflicting user needs, and ensure that information is communicated clearly and efficiently. Interpersonal skills are important to a systems analyst who must work with people at all organizational levels, balance conflicting needs of users, and communicate effectively. The knowledge and skills in leadership and strategic management are essential for the creation and achievement of an organizational vision and strategy. These skills include effective communication, decision-making, and the ability to evaluate and measure success, as well as a deep understanding of the organization and its environment. Leadership and strategic management play a crucial role in the success of any organization. A strong and effective leader with a well-developed understanding of strategic management is essential for the creation and achievement of an organizational vision and strategy.

Learn more about Organizational skills here: brainly.com/question/30471901

#SPJ11

The results of the experiment might support the hypothesis, or might not.

The correct statement is that the results of the experiment might support the hypothesis, or might not. It is important to design a well-controlled experiment that tests the hypothesis in a rigorous and systematic way. The goal is not to prove the hypothesis correct, but rather to gather evidence that either supports or contradicts the hypothesis. It is also important to conduct the experiment in a suitable environment with appropriate equipment and procedures to ensure accurate and reliable results.
Your question focuses on understanding the relationship between a hypothesis, an experiment, and the possible outcomes.
An experiment is designed to test a hypothesis, which is an educated guess or prediction about a phenomenon. When conducting an experiment, the results might either support the hypothesis or contradict it, leading to further investigation and refinement of the hypothesis. A well-designed experiment should be able to provide valuable data and insights, regardless of the outcome.

Learn more about hypothesis here:

https://brainly.com/question/31319397

#SPJ11

The statement that is true is:

"The results of the experiment might support the hypothesis or might not."

A scientist designs an experiment to test a hypothesis.

In such a scenario, it is important to note that the outcome of the experiment cannot be predicted with certainty.

The scientific method involves formulating a hypothesis, designing an experiment to test the hypothesis,

collecting and analyzing data and drawing conclusions.

The hypothesis is an educated guess that can be tested through experimentation.

It is important to remember that a hypothesis can never be proven to be 100% correct, only supported or refuted by the evidence obtained through experimentation.
It is not accurate to say that if the experimenter does the test correctly, the hypothesis will be proven correct.

This is because there are many variables that can affect the outcome of the experiment, and it is impossible to control all of them.

Additionally, a good experiment is not necessarily one that produces the most data.

A good experiment is one that is well-designed, carefully controlled, and yields reliable results.

The use of lab equipment is also not a requirement for conducting experiments.

While it is often necessary for certain types of experiments, many experiments can be conducted with simple materials and equipment.
Ultimately, the results of the experiment might support the hypothesis, or might not. If the results support the hypothesis, it can be considered a step towards validating the hypothesis.

The results do not support the hypothesis, it does not necessarily mean that the hypothesis is incorrect.

It could mean that the experiment was flawed, or that the hypothesis needs to be revised based on the new information obtained from the experiment.
Designing and conducting experiments is an important part of the scientific method.

Guarantee that an experiment will yield the desired results, a well-designed and carefully controlled experiment can provide valuable information that can help scientists understand the natural world.

For similar questions on Hypothesis

https://brainly.com/question/606806

#SPJ11

If a hypothesis test is performed and fails to reject the null hypothesis, it would mean that there is not enough evidence to support the claim that less than 15% of the marketing organization's employees are paid minimum wage.

Therefore, it would not be concluded that the claim is true. The null hypothesis assumes that the claim is false or that the percentage of employees paid minimum wage is not significantly different from 15%.

The failure to reject the null hypothesis means that the evidence does not contradict the null hypothesis, but it does not necessarily prove it to be true.

Learn more about hypothesis:

https://brainly.com/question/10854125

#SPJ11

The optimal policy for the new owner is to invest in large-scale production. This decision branch has the highest expected utility of $4.285m.

The initial node represents the decision whether to invest in the development of the microbiological product.

The two possible outcomes are a successful development or failure after 2 years.

(b) To determine the policy that the company should adopt to maximize its expected returns, we need to calculate the expected value at each decision node.

Starting from the end nodes and working backwards, we have:

For large-scale production with high sales:

Expected value = 0.75 x $6m + 0.25 x $1m = $4.25m

For large-scale production with low sales:

Expected value = 0.75 x $1m + 0.25 x $6m = $1.75m

For small-scale production with high sales:

Expected value = 0.75 x $4m + 0.25 x $2m = $3.5m

For small-scale production with low sales:

Expected value = 0.75 x $2m + 0.25 x $4m = $1.75m

At the 2-year node, the expected value for a successful development is:

For large-scale production:

Expected value = 0.75 x $4.25m + 0.25 x $1.75m = $3.5m

For small-scale production:

Expected value = 0.75 x $3.5m + 0.25 x $1.75m = $2.81m

Finally, at the initial node, the expected value for investing in the development is:

Expected value = 0.6 x $3.5m + 0.4 x (-$3m) = $0.1m

Therefore, the policy that the company should adopt to maximize its expected returns is to invest in the development of the microbiological product, choose large-scale production if the development is successful, and choose small-scale production otherwise.

(c) If the probability of a successful development is lower than a certain threshold, the option of not developing the product should be chosen. Let p be this threshold probability. Then the expected value at the initial node is:

Expected value = p x $0m + (1-p) x (-$3m) = -$3m + $3mp

Setting this equal to zero and solving for p, we get:

p = 1

Therefore, if the probability of a successful development is lower than 100%, the company should not invest in the development of the microbiological product.

(d) The new owner's utilities represent their preferences for the sums of money involved in the decision.

The utilities are increasing and concave, indicating diminishing marginal utility of money.

This means that the new owner is risk-averse.

The policy identified in (b) may not be optimal for the new owner because their utilities are different from the present-value net returns.

To determine the optimal policy for the new owner, we need to use the new owner's utility values to calculate the expected utility of each decision branch in the decision tree.

If the company invests in large-scale production and high sales are achieved, the expected utility is 0.75 * 0.95 * 1.0 * $6m = $4.285m.

If the company invests in large-scale production and low sales are achieved, the expected utility is 0.75 * 0.95 * (1 - 0.0) * $1m = $712,500.

If the company invests in small-scale production and high sales are achieved, the expected utility is 0.75 * 0.05 * 1.0 * $4m = $150,000.

If the company invests in small-scale production and low sales are achieved, the expected utility is 0.75 * 0.05 * (1 - 0.0) * $2m = $75,000.

If the company decides not to invest in the product, the expected utility is 0.25 * (1 - 0.6) * $0m + 0.25 * 0.6 * (1 - 0.0) * -$3m = -$450,000.

Therefore, the optimal policy for the new owner is to invest in large-scale production. This decision branch has the highest expected utility of $4.285m.

For similar question on optimal policy:

https://brainly.com/question/30300677

#SPJ11

the total number of squares that contain the black center square is[tex]$1 + 4 + 9 + 16 + 1 = \boxed{31}$.[/tex]

To solve this problem, we need to count the number of squares of each size that contain the black center square.

There is only one square of size[tex]$5\times 5$[/tex], which is the entire grid and obviously contains the black center square.

For squares of size[tex]$4\times 4$[/tex], there are [tex]$4$[/tex]possible squares that contain the black center square (one for each corner).

For squares of size[tex]$3\times 3$,[/tex] there are 9 possible squares that contain the black center square (one for each position that the center square could occupy, and then each of those squares could be oriented in three different ways).

For squares of size $2\times 2$, there are $16$ possible squares that contain the black center square (one for each pair of adjacent squares).

For squares of size [tex]$1\times 1$[/tex], there is only one possible square that contains the black center square (the center square itself).

Therefore, the total number of squares that contain the black center square is[tex]$1 + 4 + 9 + 16 + 1 = \boxed{31}$.[/tex]

learn more about squares

https://brainly.com/question/14198272

#SPJ11

There are 11 squares containing the black center square in the 5x5 grid.

To find the number of squares that contain the black center square, we'll consider the sizes of the squares and their positions in the 5x5 grid.
The black center square is a 1x1 square itself, so that's 1 square.
For 2 x 2 squares containing the center square, there are 4 possible positions (the center square can be in any corner). So, that's 4 squares.
For 3x3 squares containing the center square, there is only 1 possible position (the center square is exactly in the middle). So, that's 1 square.
4. For 4x4 squares containing the center square, there are 4 possible positions (the center square can be in any corner). So, that's 4 squares.
5. For 5x5 squares containing the center square, there is only 1 possible position (the center square is exactly in the middle).

So, that's 1 square.
Now, we'll add up the number of squares we found in each step:
1 + 4 + 1 + 4 + 1 = 11.

For similar question on squares.

https://brainly.com/question/23305357

#SPJ11

Therefore, the mean weight for each group in the three randomizations are:

First Randomization:

Group A: 12.5

Group B: 11.46

Second Randomization:

Group A: 11.56

Group B: 12.4

Third Randomization:

Group A: 12.18

Group B: 12.18

The mean, also known as the average, is a measure of central tendency in statistics. It is found by adding up all the values in a data set and dividing by the number of values in the set. The mean is sensitive to extreme values, or outliers, in the data set, and can be influenced by them. It is one of the most commonly used measures of central tendency, along with the median and mode.

Here,

First Randomization:

Group A: (13.6 + 12.1 + 15.9 + 11.2 + 9.7) / 5 = 12.5

Group B: (9.2 + 8.2 + 11.5 + 13.8 + 14.6) / 5 = 11.46

Second Randomization:

Group A: (8.2 + 13.8 + 15.9 + 9.2 + 9.7) / 5 = 11.56

Group B: (12.1 + 14.6 + 13.6 + 11.2 + 11.5) / 5 = 12.4

Third Randomization:

Group A: (8.2 + 9.7 + 11.5 + 14.6 + 15.9) / 5 = 12.18

Group B: (12.1 + 13.8 + 13.6 + 11.2 + 9.2) / 5 = 12.18

To know more about mean,

https://brainly.com/question/14724376

#SPJ1

Answer:

LOOK BELOW FOR ANSWER !!

Step-by-step explanation:

After the first randomization,

A  is  12.5

B  is 11.46

and A-B  is 1.04

After the second randomization,

A is 11.36

B is 12.6

A and B is -1.24

After the third randomization,

A is 11.98

B is 11.98

A and B is 1

.

One measure we use to determine the F-statistics is the ratio of the variability within and across groups when we are doing the one way-ANOVA test.

We are interested in discovering whether there are significant differences between the means of the populations when doing a one-way ANOVA test on more than two independent normally distributed populations. A test statistic used to reach this conclusion is the F-statistic.

The ratio of the variability of the between group and within group is the a tool that we use to find the F-statistics.

F is equal to (SSB/k-1) / (SSW/N-k)

To know more about f-statistic, visit,

https://brainly.com/question/29104227

#SPJ4

The rate at which the gray whale swims is 6.7 kilometers per hour.

What is the equation that relates the distance, rate, and time?

The equation that relates the distance, rate, and time is distance = rate × time

This equation can be used to calculate any one of the three variables if the other two are known.

For example, if you know the rate at which an object is moving and the time it has been moving, you can use this equation to find the distance it has traveled. Or, if you know the distance traveled and the time it took to travel that distance, you can use this equation to find the average rate of travel.

We are given that the distance traveled by the gray whale is 161 kilometers in 24 hours. Therefore, we can use the equation to find the rate at which the gray whale swims,

rate = distance / time = 161 km / 24 h ≈ 6.7 kph

Rounding to the nearest tenth, the rate at which the gray whale swims is approximately 6.7 kilometers per hour.

Learn more about the equation of distance, rate and time?

https://brainly.com/question/26046491

#SPJ1

As per the unitary method, the list shows the number of each type of animal on this farm is

Number of pigs = x

Number of horses = 2x

Number of cows = 8x

Let us start by assigning variables to each type of animal on the farm. Let's say the number of pigs is "x".

From the problem statement, we know that there are twice as many horses as pigs. Therefore, the number of horses would be 2x.

Further, we know that there are four times as many cows as horses. So, the number of cows would be 4 times the number of horses. Mathematically, we can represent it as:

Number of cows = 4 * Number of horses

Or, Number of cows = 4 * (2x) = 8x

Therefore, we have the number of each type of animal on the farm as follows:

Number of pigs = x

Number of horses = 2x

Number of cows = 8x

This is the same ratio as we found using the unitary method.

Therefore, our solution is correct.

To know more abut unitary method here

https://brainly.com/question/28276953

#SPJ4