a piece of wood is has a density of 0.600 g/cm3. when dipped in water, what fraction of the wood is submerged inside water? (give answer to 3 significant figures)

The magnitude of the uniform electric field required to stop the protons in a distance of 2 m is 1.10 x 10^32 N/C.

To solve this problem, we need to use the equation for the work done by an electric field on a charged particle:

W = qEd

First, we need to calculate the velocity of the protons:

[tex]K = 1/2 mv^2 \\v = sqrt(2K/m)[/tex]

Plugging in the values, we get:

[tex]v = sqrt(2 * 3.25 * 10^{-15} J / 1.673 * 10^{-27} kg)\\v = 5.94 * 10^6 m/s[/tex]

Time it takes for the proton to stop:

[tex]t = d/v \\t = 2 m / 5.94 * 10^6 m/s \\t = 3.37 * 10^-7 s[/tex]

Finally, we can use the time and the acceleration due to the electric field to calculate the electric field strength:

[tex]a = v/t \\a = 5.94 * 10^6 m/s / 3.37 * 10^{-7} s\\a = 1.76 * 10^13 m/s^2[/tex]

[tex]E = a/q \\E = 1.76 * 10^{13} m/s^2 / 1.602 * 10^{-19} C\\E = 1.10 * 10^{32} N/C[/tex]

Therefore, the magnitude of the uniform electric field required to stop the protons in a distance of 2 m is 1.10 x 10^32 N/C.

To know more about electric field strength, here

brainly.com/question/28227168

#SPJ4

One statement that must be true is that the gravitational force exerted by the Sun on Jupiter is much greater than the force exerted by Jupiter on the Sun.

This is because the force of gravity between two objects is directly proportional to the masses of the objects and inversely proportional to the square of the distance between them. In this case, the mass of the Sun is much greater than the mass of Jupiter, so the force exerted by the Sun is much stronger.

Additionally, the distance between the Sun and Jupiter is relatively large compared to the size of the objects themselves, so the force of gravity is further weakened. This is why Jupiter orbits the Sun, rather than the other way around.

Learn more about gravitational force

https://brainly.com/question/12528243

#SPJ4

If a wrench is 28 cm long, the mechanic must exert a force of 3.57 N perpendicular to the wrench at its end.

To solve this problem, we need to use the formula:

Force = Torque / Distance

where Torque is the product of force and distance. In this case, we know the distance (28 cm), but we need to find the torque first.

Assuming that the mechanic is applying a force perpendicular to the wrench, the torque can be calculated as:

Torque = Force x Distance

where Force is the force exerted by the mechanic at the end of the wrench and Distance is the length of the wrench (28 cm).

Rearranging the formula, we get:

Force = Torque / Distance

Substituting the values, we get:

Force = (Torque) / (Distance)
Force = (1 N.m) / (0.28 m)
Force = 3.57 N

Therefore, the mechanic must exert a force of 3.57 N perpendicular to the wrench at its end. The unit for force is Newtons (N).

More on force: https://brainly.com/question/22597079

#SPJ11

The work done by the centripetal force during one revolution is 31.5 J.

To find the work done by the centripetal force during one revolution, we can use the formula:

W = Fc × d

where W is the work done, Fc is the centripetal force, and d is the distance traveled in one revolution.

First, we need to find the centripetal force. We can use the formula:

[tex]Fc = mv^2 / r[/tex]

where m is the mass of the ball, v is its speed, and r is the radius of the circle.

Plugging in the values we get:

[tex]Fc = (5.0 kg) × (1.0 m/s)^2 / 3.0 m[/tex]

Fc = 1.67 N

Next, we need to find the distance traveled in one revolution. The circumference of the circle is:

C = 2πr = 2π(3.0 m) = 18.85 m

So the distance traveled in one revolution is equal to the circumferenc

d = 18.85 m

Now we can calculate the work done by the centripetal force:

W = Fc × d

W = (1.67 N) × (18.85 m)

W = 31.5 J

Learn more about centripetal force

https://brainly.com/question/11324711

#SPJ4

Hello! I'd be happy to help you with this problem. Here's a step-by-step explanation using the terms "speed," "radius," "work done," and "centripetal force":

1. First, we need to find the centripetal force acting on the 5.0 kg ball. The formula for centripetal force (F_c) is:

F_c = (m * v^2) / r

where m = mass (5.0 kg), v = speed (1.0 m/s), and r = radius (3.0 m).

2. Plug the values into the formula:

F_c = (5.0 kg * (1.0 m/s)^2) / 3.0 m

F_c = (5.0 kg * 1.0 m^2/s^2) / 3.0 m

F_c = 5.0 N

3. Now, we need to find the work done (W) by the centripetal force during one revolution. In this case, the work done is zero because the force acts perpendicular to the displacement of the ball, and the angle between the force and displacement is 90 degrees.

For work done, the formula is:

W = F_c * d * cos(theta)

where d is the displacement and theta is the angle between the force and displacement.

4. Since the angle (theta) is 90 degrees, cos(theta) = 0. Therefore,

W = 5.0 N * d * 0

W = 0 J (Joules)

So, the work done by the centripetal force during one revolution is 0 Joules.

It takes light approximately 39.5 minutes to travel the distance from the Sun to Jupiter.

Since it takes light approximately 8 minutes to reach the Earth from the surface of the sun, we know that the distance between the sun and the Earth is 1 astronomical unit (1 au).

Therefore, to find out how long it takes light to travel 5 au (the distance between Jupiter and the sun), we can use the following formula:

time = distance ÷ speed of light

The speed of light is approximately 299,792,458 meters per second.

So,

time = 5 au x 149,597,870,700 meters/au ÷ 299,792,458 meters/second
time = 39.5 minutes

Therefore, it takes approximately 39.5 minutes for light to travel from the surface of the sun to Jupiter.

Know more about astronomical unit here:

https://brainly.com/question/15211176

#SPJ11

Answer:

1990.47 m/s

Explanation:

Answer: the answer is in the screen shots

Explanation:

The angle between the wire and the magnetic field is approximately 33.6 degrees.

To find the angle between the wire and the magnetic field, we will use the following formula for the magnetic force per meter on a wire:

F = BIL sin(θ)

where F is the magnetic force per meter, B is the magnetic field strength, I is the current flowing through the wire, L is the length of the wire, and θ is the angle between the wire and the magnetic field.

Given that the magnetic force is only 55% of its maximum possible value, we can write the equation as:

0.55 * F_max = BIL sin(θ)

The maximum force occurs when sin(θ) = 1, which means:

F_max = BIL

Now, we can substitute F_max back into our first equation:

0.55 * BIL = BIL sin(θ)

Now, divide both sides by BIL:

0.55 = sin(θ)

Finally, to find the angle θ, take the inverse sine (sin^(-1)) of both sides:

θ = sin^(-1)(0.55)

θ ≈ 33.6 degrees

So approximately 33.6 degrees is the angle between the wire and the magnetic field.

More on magnetic field: https://brainly.com/question/15567206

#SPJ11

The voltage will decrease after approximately 25.7 microseconds.

To determine the time it takes for the voltage across the flashlight bulb to drop to 2 V, we need to calculate the time constant of the circuit, which is given by:

[tex]τ = RC[/tex]

where R is the resistance of the flashlight bulb and C is the capacitance of the capacitor.

Since the problem does not provide the value of the resistance of the flashlight bulb, we cannot determine the time constant directly. However, we can estimate the resistance of the bulb based on its power rating.

Let's assume that the flashlight bulb has a power rating of 0.5 W. Using Ohm's law (P = IV) and the fact that the voltage across the bulb is initially 3 V, we can estimate the initial current through the bulb to be:

[tex]I = P / V = 0.5 / 3 = 0.1667 A[/tex]

Assuming that the resistance of the bulb is constant over time (which is not strictly true, but a reasonable approximation), we can use Ohm's law again to estimate the resistance of the bulb:

[tex]R = V / I = 3 / 0.1667 = 18 Ω[/tex]

Now that we have an estimate of the resistance, we can calculate the time constant:

[tex]τ = RC = 18 * 3e-6 = 54e-6 s[/tex]

To find the time it takes for the voltage across the bulb to drop to 2 V, we can use the equation:

[tex]V(t) = V0 * e^(-t/τ)[/tex]

where V0 is the initial voltage (3 V) and V(t) is the voltage at time t. We want to find the time t when [tex]V(t) = 2 V.[/tex]

[tex]2 = 3 * e^(-t/τ)[/tex]

Taking the natural logarithm of both sides, we get:

[tex]ln(2/3) = -t/τ[/tex]

Solving for t, we get:

[tex]t = -ln(2/3) * τ[/tex]

Substituting the values we have calculated, we get:

[tex]t = -ln(2/3) * 54e-6 = 25.7 μs[/tex]

Therefore, it will take about 25.7 microseconds for the voltage across the flashlight bulb to drop to 2 V.

Learn more about voltage

brainly.com/question/29445057

#SPJ11

The moving rod will have a length 95% that of an identical rod at rest when it is traveling at approximately 31.2% the speed of light.

"c" represents the speed of light. The phenomenon you are describing is called length contraction, which occurs when an object is moving at a significant fraction of the speed of light.

According to the theory of special relativity, the length of the moving rod, L, will appear shorter than its length at rest, L₀, as observed from a stationary frame of reference. The equation for length contraction is:

L = L₀ * √(1 - v²/c²)

where L is the length of the moving rod, L₀ is the length of the rod at rest, v is the velocity of the moving rod, and c is the speed of light.

The moving rod has a length 95% that of the rod at rest. Therefore, we can set up the equation as:

0.95 * L₀ = L₀ * √(1 - v²/c²)

To solve for v, divide both sides by L₀ and then square both sides:

0.95² = 1 - v²/c²

Rearrange the equation and solve for v/c:

v/c = √(1 - 0.95²)

v/c ≈ 0.312

For more such questions on Length.

https://brainly.com/question/17192440#

#SPJ11

The total estimated amount of fluid to be infused in the first 8 hours would be 14,040 mL.

The total estimated amount of fluid to be infused during the first 8 hours of a burn injury can be calculated using the Parkland formula:

For a 65 kg male with burns to the front and back of the trunk and front and back of both arms, the TBSA burned can be estimated using the Rule of Nines:

Thus, the total estimated amount of fluid to be infused in the first 8 hours would be:

Note that this formula is only an estimate and fluid requirements may vary depending on the individual patient's response to treatment. Close monitoring and adjustment of fluid therapy is essential in burn patients.

To learn more about total body surface area (TBSA), here

https://brainly.com/question/30432981

#SPJ4

To determine the net force required to accelerate a 20-kg object at 6.0 m/s² on the moon, we need to consider the acceleration due to gravity on the moon and the object's mass.

The acceleration due to gravity on the moon is one-sixth that on Earth. Since the acceleration due to gravity on Earth is approximately 9.81 m/s², the acceleration due to gravity on the moon is (1/6) * 9.81 m/s² ≈ 1.63 m/s².

Now, we can use Newton's second law of motion, F = m * a, to find the net force required for the given acceleration on the moon. Here, m = 20 kg (mass of the object) and a = 6.0 m/s² (desired acceleration).

Net force (F) = 20 kg * 6.0 m/s² = 120 N.

So, the net force required to accelerate a 20-kg object at 6.0 m/s² on the moon is 120 N.

To know more about Newton's second law of motion:

https://brainly.com/question/27712854

#SPJ11

(a) Coils are located 31.58 cm away from the mirror.

(b) Magnification is -9.50, indicating an inverted image, and the large magnitude helps spread out the reflected energy for effective heating.

(a) We can use the mirror equation to solve for the distance of the object (coils) from the mirror:

1/f = 1/do + 1/di

where f is the focal length (half the radius of curvature), do is the distance of the object from the mirror, and di is the distance of the image from the mirror.

Substituting the given values, we get:

1/25 = 1/do + 1/300

Solving for do, we get:

do = 31.58 cm

So the coils are 31.58 cm away from the mirror.

(b) The magnification, M, is given by:

M = -di/do

Substituting the given values, we get:

M = -3.00 m / 0.3158 m

M = -9.50

The negative sign indicates that the image is inverted. The large magnitude of the magnification means that the reflected energy is spread out over a large area, making the heater more effective at heating a room.

Learn more about Magnification

https://brainly.com/question/31595015

#SPJ4

Numerous tiny ice and rock fragments make up the planet's ring system. The four jovian planets differ from one another in terms of colour and shape.

All rings lie in the planet's equatorial plane. Jupiter's rings are the brightest and widest among jovian planets. Their particles consist mostly of small, dark rock fragments. Saturn's rings are mostly dusty and less visible. Uranus and Neptune both have narrow bright rings divided by very sparse dusty rings in between. Uranus's narrow rings show irregularities in the form of brighter arcs, as if the rings were incomplete.

Planetary rings are made up of countless small particles composed of ice and rock. All rings lie in the equatorial plane. Rings' particles have elliptical orbits. Saturn's rings are the brightest and widest among jovian planets. Their particles consist mostly of ice. Jupiter's rings are mostly dusty and less visible. Uranus and Neptune both have narrow bright rings divided by very sparse dusty rings in between. Neptune's narrow rings show irregularities in the form of brighter arcs, as if the rings were incomplete.

For more such questions on Planetary rings , Visit:

https://brainly.com/question/9828009

#SPJ11

The blue color of Uranus and Neptune's atmosphere is due to the presence of methane gas.

Uranus and Neptune have blue atmospheres primarily because of the presence of methane gas. Methane absorbs light in the red part of the spectrum more efficiently than in the blue part, causing the reflected sunlight to appear blue. This is similar to why the ocean appears blue; water absorbs red light more efficiently than blue light, causing the reflected light to appear blue.

In contrast, Jupiter and Saturn have predominantly red and orange atmospheres because of the presence of ammonia and other hydrocarbons. These chemicals absorb blue light more efficiently than red light, causing the reflected sunlight to appear reddish or orange. Jupiter's famous Great Red Spot, for example, is a massive storm that exposes deeper layers of the atmosphere where these chemicals are more abundant, resulting in reddish color.

Overall, the colors of a planet's atmosphere depend on the chemical composition of the atmosphere and how it interacts with sunlight. Different chemicals absorb and reflect different wavelengths of light, giving each planet its own unique coloration.

Learn more about methane gas:
https://brainly.com/question/23151003

#SPJ11

The total mechanical energy of the system is 0.0066 J.

Using Hooke's Law, the spring constant can be calculated as k = F/x, where F is the weight of the mass and x is the displacement of the spring from its rest position.

In this case:

F = mg,

where m is the mass of the object and g is the acceleration due to gravity.

Therefore, k = (mg)/x.

Once the spring constant is known, the total mechanical energy of the system can be calculated as:

E = (1/2)kx^2.

Substituting the given values, we get

k = 14.7 N/m and x = 0.03 m.

Hence, the total mechanical energy of the system is

E = (1/2)kx^2 = 0.0066 J.

To know more about Hooke's Law, here

brainly.com/question/29126957

#SPJ4

The correct statement regarding the resolution of a grating is that the resolution increases with the number of grooves per mm, the correct option is (c).

The resolution of a grating is defined as the ability to separate two closely spaced spectral lines or wavelengths. It is determined by the number of grooves per unit length on the grating surface, as well as the wavelength of the incident light and the angle of incidence.

A higher number of grooves per mm means that the grating will disperse the incoming light into more angles, resulting in higher resolution. Therefore, the number of grooves per mm is the primary factor that determines the resolution of a grating, the correct option is (c).

To learn more about resolution follow the link:

https://brainly.com/question/30753488

#SPJ4

The complete question is:

Which statement is true regarding the resolution of a grating?

a. resolution increases with wavelength

b. resolution decreases with number of grooves per mm

c. resolution increases with number of grooves per mm

d. resolution is not determined by the monochromator

e. resolution increases with slit width

Hydrolysis is a chemical reaction in which water is used to break down complex molecules into simpler ones.

This process is more common in a humid or wet climate. In such climates, water is readily available and tends to accumulate in soils and rocks, leading to the formation of aqueous solutions. These solutions can then react with various minerals and organic compounds, promoting hydrolysis. Moreover, the presence of high temperatures and abundant vegetation in tropical climates accelerates the process of hydrolysis.

This results in the decomposition of organic matter, which releases nutrients and minerals that can support plant growth. Overall, hydrolysis plays a crucial role in many environmental processes and is particularly important in regions with high moisture levels.

Learn more about complex molecules

https://brainly.com/question/30336127

#SPJ4

Water is utilised in a chemical procedure called hydrolysis to convert complicated molecules into simpler ones.

A humid or moist climate favours this procedure more frequently. In such environments, water is easily accessible and has a propensity to build up in rocks and soils, resulting in the creation of aqueous solutions. The subsequent reactions between these solutions and different minerals and organic molecules can encourage hydrolysis. Additionally, tropical areas' high temperatures and plenty of flora hasten the hydrolysis process.

This causes organic materials to decompose, releasing nutrients and minerals that can help plants flourish. Overall, hydrolysis is critical to many environmental processes and is especially significant in areas with high levels of moisture.

learn more about complicated molecules here:

https://brainly.com/question/13443071

#SPJ11

The frequency of red light when the wavelength is 700 NM is 4.29 x 1014 Hz.

Given: Wavelength 700NM.

To Find: Frequency of red light.

Solution: Frequency is the inverse of the period (t) and it is the number of oscillations per unit of time or the number of repetitions of an event by an object per unit of time.

Frequency can also be calculated in terms of wavelength and speed of light.

The formula for frequency is given by the equation:

frequency c (in ms-2) wavelength in m Here,c = speed of light in ms-2 = 3x 108 wavelength = 700 × 10-9 m

The formula for frequency = [tex]\frac{speed }{wavelengh}[/tex]

Frequency = [tex]\frac{3\times 10^{8} }{700\times 10^{-9} } = \frac{30}{7}\times 10^{14} =4.29\times 10^{14}[/tex]

Henceforth, the frequency of red light when the wavelength is 700 NM is 4.29 x 1014 Hz.

Learn more about wavelength:

https://brainly.in/question/21460937

The velocity of a proton when it enters the magnetic field is [tex]1.58 × 10^7 m/s.[/tex]

We can use the equation for the magnetic force on a charged particle to solve this problem:

F = qvBsinθ

where F is the magnetic force, q is the charge of the particle, v is its velocity, B is the magnetic field, and θ is the angle between the velocity vector and the magnetic field.

Since the proton has a positive charge, it will experience a force perpendicular to its velocity vector, which will cause it to move in a circular path in the plane of the page.

The centripetal force required to keep the proton in a circular path is provided by the magnetic force, so we can equate the two forces:

[tex]F = mv^2/r[/tex]

where m is the mass of the proton, and r is the radius of the circular path.

Equating these two forces, we get:

[tex]qvBsinθ = mv^2/r[/tex]

Solving for the radius, we get:

[tex]r = mv/qBsinθ[/tex]

Substituting the given values, we get:

[tex]r = (1.67 × 10^-27 kg)(3 × 10^8 m/s)/((1.6 × 10^-19 C)(1.00 T)sinθ) = 3.32 × 10^-3/sinθ meters[/tex]

The kinetic energy of the proton is also given, which can be related to its speed v:

[tex]K = (1/2)mv^2[/tex]

[tex]v = sqrt(2K/m) = sqrt((2)(6.00 × 10^6 eV)(1.6 × 10^-19 J/eV)/(1.67 × 10^-27 kg)) = 1.58 × 10^7 m/s[/tex]

Substituting this value for v, we get:

[tex]r = (1.67 × 10^-27 kg)(1.58 × 10^7 m/s)/((1.6 × 10^-19 C)(1.00 T)sinθ) = 1.05 × 10^-3/sinθ meters[/tex]

Finally, we can solve for sinθ:

[tex]sinθ = r/(1.05 × 10^-3 meters) = (3.32 × 10^-3 meters)/(1.05 × 10^-3 meters) = 3.15[/tex]

However, since sinθ can only range from -1 to 1, this value is not physically meaningful. Therefore, we can conclude that the proton cannot enter the magnetic field at any angle that will result in a circular path.

Learn more about magnetic field

brainly.com/question/14848188

#SPJ11

The solid forms of ice last longer because there is more weight with less surface area. This statement is false.

Factors like temperature, shape, size, humidity and impurities are some of the factor decides the time for which the ice survives. Even though larger ice particles may have more surface area than solid forms of ice, this does not always imply that they will persist longer.

In reality, due to the insulating effect of the ice itself, larger ice formations, like glaciers, can melt more quickly. In the end, a complex combination of physical, chemical, and environmental elements determines how long ice will last.

To know more about Melting of ice, visit,

https://brainly.com/question/1079154

#SPJ4

Here is a breakdown of patient care document on Penicillin, history, discussion and advantages and disadvantages.

Penicillin: A Breakthrough in Antibiotics

History: Discovery, Development, or Invention

Alexander Fleming, a Scottish biologist and pharmacologist, is credited with the discovery of penicillin in 1928. While studying staphylococci bacteria, Fleming noticed that a mold called Penicillium notatum had contaminated his petri dishes and inhibited bacterial growth around it. He identified the substance as penicillin, but it wasn't until 1939 that the first attempt to use penicillin to treat bacterial infections was made by Howard Florey and Ernst Chain, a team of British scientists. They succeeded in producing enough penicillin to test it on mice and humans, and by 1942, mass production of penicillin had begun in the United States.

Description: What is it? How is it used?

Penicillin is a type of antibiotic that kills or stops the growth of bacteria. It is made from the Penicillium mold and is commonly used to treat bacterial infections, including strep throat, pneumonia, and meningitis. Penicillin works by targeting the cell wall of bacteria, which weakens and ruptures the cell, causing it to die. It is available in several forms, including oral tablets, injections, and topical ointments.

Discussion: How did this benefit patient care?

The discovery and development of penicillin revolutionized the field of medicine and had a significant impact on patient care. Before the discovery of penicillin, bacterial infections were often fatal, and there were no effective treatments available. Penicillin's ability to kill bacteria led to a significant reduction in mortality rates and allowed doctors to treat previously untreatable infections. It also paved the way for the development of other antibiotics, which have since saved countless lives.

Advantages and Disadvantages

The use of penicillin has several advantages, including its ability to effectively treat bacterial infections, its low cost, and its ease of administration. However, penicillin can also have side effects, including allergic reactions, nausea, and diarrhea. Overuse of antibiotics, including penicillin, can also lead to the development of antibiotic-resistant bacteria, which can make infections more difficult to treat.

In conclusion, the discovery and development of penicillin is a remarkable example of how scientific research can have a profound impact on patient care. Its ability to treat bacterial infections has saved countless lives and has paved the way for the development of other antibiotics. While there are potential side effects and risks associated with the use of penicillin, its benefits far outweigh its drawbacks.

Find out more on patient care here: https://brainly.com/question/4784548

#SPJ1

When the switch is closed, the circuit is completed, and the current starts flowing. The behavior of each bulb depends on the arrangement of the bulbs and the switch in the circuit.

If the bulbs are arranged in a series circuit, the current flows through both bulbs in the same direction. In this case, the voltage across each bulb is proportional to its resistance. Therefore, if the bulbs have the same resistance, they will have the same voltage across them. If one bulb has a higher resistance than the other, it will have a higher voltage across it. The current flowing through both bulbs will be the same, but the voltage across them will differ.

If the bulbs are arranged in a parallel circuit, the current splits into different branches and each branch contains a bulb. In this case, the voltage across each bulb is the same, and the current flowing through each bulb is proportional to its resistance. Therefore, if one bulb has a higher resistance than the other, it will have a lower current flowing through it. If one bulb has a lower resistance than the other, it will have a higher current flowing through it. The voltage across both bulbs stays the same, and no other bulb becomes short-circuited.

In conclusion, the behavior of each bulb depends on the arrangement of the circuit. If the bulbs are arranged in a series circuit, the voltage across them differs, and the current flowing through them is the same. If the bulbs are arranged in a parallel circuit, the voltage across them is the same, and the current flowing through them differs.

To learn more about circuit

https://brainly.com/question/27206933

#SPJ4

Complete question:

What happens to each bulb if the switch is closed? Match the words in the left column to the appropriate blanks in the sentences on the right. Res through both bulbs Once the switch is closed, the current flows because only through bulb A only through bulb B the voltage across it becomes zero the voltages across them stay the same another bulb becomes short-circuited no branch of a circuit is opened.

The statement that is true with respect to Faraday's law of induction is option C - the voltage induced depends on how quickly the area and magnetic field change.

Faraday's law states that the voltage induced in a coil is proportional to the rate of change of magnetic flux through the coil. Magnetic flux is the product of the magnetic field strength and the area of the loop within which the magnetic field is penetrating.

Therefore, a change in either the magnetic field strength or the area of the loop will result in a change in magnetic flux, which in turn will induce a voltage in the coil. The faster the change in magnetic flux, the greater the induced voltage will be.

Learn more about Faraday's law of induction here: https://brainly.com/question/17012638

#SPJ11

When the distance between two charges is halved, the electrical force between the charges quadruples. This is due to the inverse square relationship between distance and electrical force, which means that when distance is halved, the force increases by a factor of 4.

The electrical force between the charges quadruples when the distance between them is halved. This is due to Coulomb's Law, which states that the electrical force (F) between two charges (q1 and q2) is directly proportional to the product of the charges and inversely proportional to the square of the distance (r) between them. Mathematically, it can be expressed as:

F = k * (q1 * q2) / r^2

When the distance (r) is halved, the denominator (r^2) becomes 1/4 of its original value, which causes the electrical force (F) to be 4 times greater, or quadruple.

To learn more about quadruples please visit:

https://brainly.com/question/7966538

#SPJ11

The charge on a discharging capacitor decreases exponentially with time, and the rate of the decrease is determined by the resistance and capacitance values in the circuit.

The charge on a discharging capacitor decreases exponentially with time according to the following equation:

[tex]Q(t) = Q0 * e^{-t / (R * C})[/tex]

where Q(t) is the charge on the capacitor at time t, Q0 is the initial charge on the capacitor, R is the resistance in the circuit, C is the capacitance of the capacitor, and e is the mathematical constant known as Euler's number.

The time constant for the discharging process is given by the product of resistance and capacitance,

τ = R * C.

The time constant represents the time it takes for the charge on the capacitor to decrease to approximately 36.8% of its initial value

(i.e.,[tex]Q(τ) = Q0 * e^{-1} ≈ 0.368 * Q0[/tex]).

Therefore, the charge on a discharging capacitor decreases exponentially with time, and the rate of the decrease is determined by the resistance and capacitance values in the circuit.

For more such questions on metabolism , Visit:

https://brainly.com/question/25923373

#SPJ11

Answer:

B

Explanation:

We can solve this using ratios.

2/293=2.5/x

Cross multiply:

2x=732.5

x=366.25 K

Now we got the temperature in kelvins, but we need to convert it to ⁰C.

All we need to do is subtract 273.15 degrees

366.25-273.15=93.1 ⁰C

The intensity of the fire alarm that measures 125 dB loud is approximately 3.16 W/[tex]m^{2}[/tex].

To calculate the intensity (I) of a fire alarm that measures 125 dB loud, we need to use the formula for loudness (L):

L = 10 * log10(I / Io)

In this formula, L is the loudness (in dB), I is the intensity of the sound, and Io is the reference intensity ([tex]10^{-12}[/tex] W/[tex]m^{2}[/tex]). We are given L = 125 dB and we want to find I. First, we need to rearrange the formula to solve for I:

I = Io *[tex]10^{L/10}[/tex]

Now, plug in the given values:

I = 10^-12 *[tex]10^{125/10}[/tex]
I = 10^-12 * [tex]10^{12.5}[/tex]
I ≈ 3.16 W/[tex]m^{2}[/tex]

The intensity of the fire alarm that measures 125 dB loud is approximately 3.16 W/[tex]m^{2}[/tex]

Know more about   intensity   here:

https://brainly.com/question/28145811

#SPJ11