a rectangular poster is to contain 392 square inches of print. the margins at the top and bottom of the poster are to be 2 inches, and the margins on the left and right are to be 1 inch. what should the dimensions of the poster be so that the least amount of poster is used?

Answer:

yes

Step-by-step explanation:

Event "X or Y": A, B, C, E, G. Event "X and Y": C. The complement of event X: D, E, F, G.

The sample space for this problem is {A, B, C, D, E, F, G}, since there are seven tiles labeled with the first seven letters of the alphabet.

Event X: The letter selected comes before "D". Outcomes in this event are A, B, and C.

Event Y: The letter selected is found in the word "CAGE". Outcomes in this event are A, C, E, and G.

Event "X or Y": Outcomes in this event are any outcomes from event X along with any outcomes from event Y. So the outcomes in the event "X or Y" are A, B, C, E, and G.

Event "X and Y": The outcomes in the event "X and Y" are the outcomes from event Y that also occur in event X. So the only outcome in the event "X and Y" is C.

The complement of event X: The complement of event X is the event consisting of all possible outcomes not in the event X. So the outcomes in the complement of event X are D, E, F, and G.

To know more about complement of event:

https://brainly.com/question/30212841

#SPJ4

--The given question is incomplete, the complete question is given

" A tile is selected from seven tiles, each labeled with a different letter from the first seven letters of the alphabet. The letter selected will be recorded as the outcome. Consider the following events. Event X: The letter selected comes before "D". Event Y: The letter selected is found in the word "CAGE". Give the outcomes for each of the following events. If there is more than one element in the set, separate them with commas.

(a) Event "X or Y":

(b) Event "X and Y":

(c) The complement of the event X: "--

The question "What are the prices of the computers?" is not a statistical question.

A statistical question is a question that can be answered by collecting and analyzing data. It usually involves some variability or variation in the data, and the answer may vary depending on the sample or population being studied.

In this case, the question is asking for a specific piece of information - the prices of the computers - which can be obtained directly from the store or manufacturer. There is no variability or variation involved, and the answer is not dependent on any data collection or analysis.

Therefore, this question is not a statistical question.

Read more about statistical question at

https://brainly.com/question/12723688

#SPJ1

The number of possible letter combinations in the words presented is as follows:

CANNON: 2520

BANANA: 120

TOMORROW: 2520

REFERENCE: 20160

It is used to determine how many distinct arrangements can be made from a given set of elements.

1) CANNON: CANNON is made up of seven letters, two of which are identical 'N's. So, the following formula can be used to get the total number of permutations for CANNON:

Total number of permutations = 7! / 2!

= (7 x 6 x 5 x 4 x 3 x 2 x 1) / 2!

= 2520

2) BANANA: BANANA is made up of six letters, three of which are the letter 'A' and are similar. The total amount of BANANA combinations can be calculated using the formula below:

Total number of permutations = 6! / 3!

= (6 x 5 x 4 x 3 x 2 x 1) / 3!

= 120

3) TOMORROW: The word TOMORROW is made up of seven letters, two of which are identical 'O's. Thus, the sum of TOMORROW's permutations can be determined as follows:

Total number of permutations = 7! / 2!

= (7 x 6 x 5 x 4 x 3 x 2 x 1) / 2!

= 2520

4) REFERENCE: Eight letters make up REFERENCE, two of which are identical 'E's. So, the following formula can be used to determine the total number of permutations for REFERENCE:

Total number of permutations = 8! / 2!

= (8 x 7 x 6 x 5 x 4 x 3 x 2 x 1) / 2!

= 20160

To know more about permutations, visit:

https://brainly.com/question/28065038

#SPJ1

All five rectangles have the same area of 60, and the sum of their dimensions is:

2 + 30 + 4 + 15 + 6 + 10 + 8 + 7.5 + 10

Let the width of rectangle 1 be w1, the width of rectangle 2 be w2, and so on. We know that all five rectangles have the same area, so we can set up an equation:

[tex]w1 * l1 = w2 * l2 = w3 * l3 = w4 * l4 = w5 * l5[/tex]

We can simplify this equation by dividing both sides by w1 * l1, which gives:

[tex]1 = (w2 * l2) / (w1 * l1) = (w3 * l3) / (w1 * l1) = (w4 * l4) / (w1 * l1) = (w5 * l5) / (w1 * l1)[/tex]

Let's define a new variable x = w2 * l2 = w3 * l3 = w4 * l4 = w5 * l5. Then we have:

[tex]w1 * l1 = xw2 * l2 = xw3 * l3 = xw4 * l4 = xw5 * l5 = x[/tex]

Now we need to find the least possible value of w1 + l1 + w2 + l2 + w3 + l3 + w4 + l4 + w5 + l5. Since w1 * l1 = x, we can rewrite this as:

[tex]w1 + l1 + 4 * sqrt(x / w1) + 4 * sqrt(w1 / x)[/tex]

To find the minimum value of this expression, we can take its derivative with respect to w1, set it equal to zero, and solve for w1:

[tex]d/dw1 (w1 + l1 + 4 * sqrt(x / w1) + 4 * sqrt(w1 / x)) = 1 - 2 * sqrt(x) / w1^1.5 + 2 * sqrt(x) / w1^2.5 = 0[/tex]

Solving for w1, we get:

[tex]w1 = 2 * x^(1/4)[/tex]

Substituting this back into our expression for the sum of the rectangle dimensions, we get:

[tex]w1 + l1 + 4 * sqrt(x / w1) + 4 * sqrt(w1 / x) = 2 * x^(1/4) + 2 * x^(3/4) + 8 * (x / 2)^(1/4)[/tex]

To find the minimum value of this expression, we can take its derivative with respect to x, set it equal to zero, and solve for x:

[tex]d/dx (2 * x^(1/4) + 2 * x^(3/4) + 8 * (x / 2)^(1/4)) = 1/2 * x^(-3/4) + 3/2 * x^(1/4) + 2 / (2 * x)^(3/4) = 0[/tex]

Solving for x, we get:

x = 4

Therefore, the least possible value of w1 is:

w1 =[tex]2 * x^(1/4) = 2[/tex]

And the dimensions of the rectangles are:

Rectangle 1: 2 x 30

Rectangle 2: 4 x 15

Rectangle 3: 6 x 10

Rectangle 4: 8 x 7.5

Rectangle 5: 10 x 6

To know more about rectangle. here

https://brainly.com/question/25292087

#SPJ4

The volume of the solid as shown in the diagram is 540 cm².

Volume is the space occupied by a solid shape.

To calculate the volume of the of the solid, we use the formula below

Formula:

Where:

From the diagram in question,

Given:

Substitute these values into equation 1

Hence, the volume is 540 cm³.

Learn more about volume here: https://brainly.com/question/1331127

#SPJ1

The total surface area of the triangular prism is calculated to be equal to 608 square centimeters.

The triangular prism can be observed to be a large rectangle and two identical triangles, so we shall calculate for the total surface area as follows:

area of one triangle = 1/2 × 8 cm × 12 cm

area of one triangle = 48 cm²

area of the two triangle faces = 2(48) = 96 cm²

area of the large rectangle face = (10 + 12 + 12) cm × 16 cm = 512 cm²

Total surface area of prism = 96 cm² + 512 cm² = 608 cm²

Therefore, the total surface area of the triangular prism is calculated to be equal to 608 square centimeters.

Read more about surface area here:https://brainly.com/question/12506372

#SPJ1

Answer: w = ±7

Step-by-step explanation:

To get rid of the square on w, we square root both sides of the equation.

The square root of w^2 is w, and the square root of 49 is ±7.

±7 is your answer.

Therefore , the solution of the given problem of equation comes out to be 10x - y = 51 is the point-slope form of the equation of the line passing through the points (6, -9) and (7, 1).

Variable words are frequently used in complex algorithms to show consistency between two arguments that are opposed to one another. Academic expressions called equations are used to show the equality of various academic figures. Take into account the details in the z + 7 proposals.

Here,

The equation for the line passing between the points (6, -9) and (7, 1) must be found in the point-slope form.

Using the equation m = (y2 - y1) / (x2 - x1), find the slope (m) of the line, where (x1, y1) and (x2, y2) are the coordinates of the two points.

=> (x1, y1) = (6, -9)

=> (x2, y2) = (7, 1)

=> m = (1 - (-9)) / (7 - 6)

=> m = 10 / 1 m = 10

Consequently, the line's slope is 10.

=> y - y1 = m(x - x1)

=> m = 10 (x1, y1) = (6, -9)

=> y - (-9) = 10(x - 6)

=> y + 9 = 10x - 60

=> 10x - y = 51

Therefore, 10x - y = 51 is the point-slope form of the equation of the line passing through the points (6, -9) and (7, 1).

To know more about equation visit:

https://brainly.com/question/649785

#SPJ1

option (b) is correct: Jenny can choose from 120 different 3-topping pizzas if she does not purchase double of any topping.

Given that a special on a 3-topping pizza.

The topping choices are pepperoni, sausage, bacon, mushrooms, green peppers, and olives.

There are six alternatives for the first topping, five options for the second (since we can't choose the same topping twice), and four options for the third. As a result, the total number of possible 3-topping pizzas is:

6 x 5 x 4 = 120

So option (b) is correct: Jenny can choose from 120 different 3-topping pizzas if she does not purchase double of any topping.

Learn more about multiplication here:

https://brainly.com/question/24327271

#SPJ1

This means that the corresponding sides of the two triangles are in proportion, and therefore CD is parallel to AB, as required.

A triangle is a polygon with three sides and three angles. It is one of the basic shapes in geometry and is often used in mathematics, science, engineering, and art. Triangles can be classified into different types based on the length of their sides and the size of their angles. Triangles are used in various applications, such as in the construction of buildings, bridges, and other structures, as well as in navigation and surveying. They are also important in various fields of mathematics, including trigonometry and geometry.

Here,

To use similarity theorems to show that CD is parallel to AB, we need to first establish that triangles AEB and CED are similar. If we can show that these triangles are similar, then we can use the corresponding angles theorem, which states that if two pairs of corresponding angles are congruent, then the lines containing the sides are parallel.

Let's compare the two triangles AEB and CED:

Angle AEB is congruent to angle CED (both are vertical angles).

Angle EAB is congruent to angle ECD (both are alternate interior angles formed by a transversal cutting parallel lines AB and CD).

Angle BAE is congruent to angle DCE (both are alternate interior angles formed by a transversal cutting parallel lines AB and CD).

Therefore, we have established that triangles AEB and CED are similar by the angle-angle-angle similarity theorem.

Now that we have shown that the triangles are similar, we can use the corresponding sides theorem, which states that the corresponding sides of similar triangles are in proportion, to find out if CD is parallel to AB.

The corresponding sides of AEB and CED are:

AE/CE = AB/CD

Substituting the given values, we have:

AC + CE / CE = AB / BD

4 + 12 / 12 = AB / (14/3)

16/12 = AB / (14/3)

AB = (16/12) x (14/3)

= 56/9

Now we can use the corresponding sides theorem to find the length of CD:

AE/CE = AB/CD

Substituting the values we have found, we get:

4/12 = (56/9)/CD

CD = (56/9) x (12/4)

= 14

Since we have found that AB = 56/9 and CD = 14, we can see that:

AB/CD = (56/9)/14

= 4/3

This means that the corresponding sides of the two triangles are in proportion, and therefore CD is parallel to AB, as required.

To know more about triangle,

https://brainly.com/question/28600396

#SPJ1

The slope of the line in the reduced form is 4 / 7.

The slope of a line is the change in the dependent variable with respect to the change in the independent variable.

Therefore,

slope = m = change in y / change in x

slope = m = y₂ - y₁ / x₂ - x₁

P = (2, 3)

Q = (9, 7)

x₁ = 2

x₂ = 9

y₁ = 3

y₂ = 7

Therefore,

slope = 7 - 3 / 9 - 2

slope = 4 / 7

learn more on slope here: https://brainly.com/question/26578510

#SPJ1

The length of the side b for the right triangle ABC is equal to 5.276, and the measures of angle A and B are 64 and 26 to the nearest degree using the sine rule.

The sine rule is a relationship between the size of an angle in a triangle and the opposing side.

The side length b is derived using the Pythagoras rule as follows:

b = √(12.2² - 11²)

b = 5.276

Using the sine rule;

12.2/sin90 = 11/sinA

A = sin⁻¹(11 × sin90)/12.2 {cross multiplication}

A = 64.4

12.2/sin90 = 5.3/sinB

B = sin⁻¹(5.276 × sin90)/12.2 {cross multiplication}

B = 25.6

Therefore, the length of the side b for the right triangle ABC is equal to 5.276, and the measures of angle A and B are 64 and 26 to the nearest degree using the sine rule.

Read more about sine rule here: https://brainly.com/question/4372174

#SPJ1

The actual amount of drink made for the third batch, however, was only 8 liters. This implies that the third batch's recipe contained less pineapple.

We are told that each liter of pineapple juice yields the same amount of drink. This is referred to as the "r" ratio. Then:

r = d/p

We can use the provided data to get a table of r values shown in below image form.

The ratio for the first two data points is the same, but it is different for the third. This suggests the drink's recipe changed between the second and third batches.

We can calculate the ratio using the first two data points:

r = d/p = 2/1 = 6/3

So the ratio is 2, which means that we obtain 2 liters of drink for every liter of pineapple juice.

This ratio can be used to calculate the estimated amount of drink for the third batch:

d = r*p = 25 = 10

The actual amount of drink made for the third batch, however, was only 8 liters. This implies that the third batch's recipe contained less pineapple.

Learn more about ratios here:

https://brainly.com/question/13419413

#SPJ1

The slope-intercept equation of line is -1 and equation will be y = -x - 1.

What is the slope?

m = (y2 - y1) / (x2 - x1) is the formula for calculating slope from two points on a line, (x1, y1) and (x2, y2). Here,

m = the line's slope

x1 is equal to the initial point's x-coordinate.

y1 is the first point's y-coordinate.

x2 is equal to the second point's x-coordinate.

The second point's x-coordinate is equal to y2.

x1 = -3, y1 = 4; x2= -2, y2=3

m = (3-4)/(-2 - (-3))

= -1 / (-2+3)

= -1/1

m = -1

Substitute the value in given equation:

y = -x + (-1)

y = -x - 1

Hence, the slope-intercept equation of line is -1 and equation will be y = -x - 1.

To know more about slope check the below link:

https://brainly.com/question/16949303

#SPJ9

The missing length is 7.5 cm.

What is a rectangular prism?

A three-dimensional solid form with six faces, including rectangular bases, is called a rectangular prism. A rectangular prism also refers to a cuboid. A cuboid and a rectangular prism have the same cross-section.

Here, we have

Let the missing length be x cm.

The formula for the surface area of a rectangular prism is:

SA = 2lw + 2lh + 2wh

We are given that the height and width are both 9 cm, so we can substitute those values and simplify:

432 = 2(x)(9) + 2(x)(9) + 2(9)(9)

432 = 18x + 18x + 162

432 - 162 = 36x

270 = 36x

x = 270/36

x = 7.5

Hence, the missing length is 7.5 cm.

To learn more about the rectangular prism from the given link

https://brainly.com/question/31509002

#SPJ1

Answer:

14 hr 32 min (1,477.7 km)

The lower and upper control limits that the manufacturer should use in the resulting control chart are LCL = 0.023,UCL = 0.043

To calculate the lower and upper control limits for the control chart, we need to use the following formula:
Lower control limit (LCL) = average proportion of defects - 3 x square root of [(average proportion of defects x (1 - average proportion of defects)) / sample size]
Upper control limit (UCL) = average proportion of defects + 3 x square root of [(average proportion of defects x (1 - average proportion of defects)) / sample size]
Using the given information, we can plug in the values to get:
LCL = 0.01 - 3 x square root of [(0.01 x 0.99) / 30] = -0.023
UCL = 0.01 + 3 x square root of [(0.01 x 0.99) / 30] = 0.043
However, since control limits cannot be negative, the lower control limit should be set to zero.

Learn more about Lower control limit here:

https://brainly.com/question/29578908

#SPJ11

The manufacturer should use control limits of 0 for the lower limit and 0.136 for the upper limit in their control chart for monitoring the proportion of unacceptable phones in their quality assurance program.

Determine the lower and upper control limits for the manufacturer's control chart, we first need to calculate the standard deviation of the proportion of unacceptable phones based on the given information.
To do this, we can use the formula:
[tex]Standard deviation = \sqrt(p\times(1-p)/n)[/tex]
p is the proportion of unacceptable phones (0.01), and n is the sample size (30 phones per day for 7 days = 210 total phones).
Plugging in these values, we get:
[tex]Standard deviation = \sqrt(0.01\times(1-0.01)/210) = 0.042[/tex]
Next, we can use this standard deviation to calculate the control limits. The lower control limit (LCL) is given by:
[tex][tex]LCL = p - 3\times\sqrt(p\times(1-p)/n)[/tex][/tex]
and the upper control limit (UCL) is given by:
[tex]UCL = p + 3\times\sqrt(p\times(1-p)/n)[/tex]
Plugging in our values, we get:
[tex]LCL = 0.01 - 3\times0.042 = -0.075[/tex]
[tex]UCL = 0.01 + 3\times0.042 = 0.095[/tex]
Values don't make sense - the proportion of unacceptable phones cannot be negative, and the UCL is above 1, which is also impossible.
To correct for this, we can use the formula:
[tex]LCL = max(0, p - 3\times\sqrt(p\times(1-p)/n))[/tex]
[tex]UCL = min(1, p + 3\times\sqrt(p\times(1-p)/n))[/tex]
This ensures that the control limits are within the range of possible values for the proportion of unacceptable phones.
Plugging in our values with this formula, we get:
[tex]LCL = max(0, 0.01 - 3\times0.042) = 0[/tex]
[tex]UCL = min(1, 0.01 + 3\times0.042) = 0.136[/tex]

For similar questions on control limit

https://brainly.com/question/29512700

#SPJ11

Answer:

1.a

2.c

3.d

4.b

Step-by-step explanation:

The length of chord XY is 5√2.

What is the length of the chord?

It is described as the line segment that connects any two points on the circle's circumference without going through the circle's center. As a result, the diameter is the chord of a particular circle that is the longest and goes through its center. In mathematics, determining the chord's length can be crucial at times.

Here, we have

Given: A circle with center O and radius 5 has a central angle XOY. X and Y are points on the circle. ​If the measure of arc XY is 90 degrees.

We have to find the length of chord XY.

∠XOY = 90°

OX = OY = 5

We draw a perpendicular from the center to chord XY bisect XY at D.

Now, since OD bisects ∠XOY

∠XOD = ∠YOD = 90°/2 = 45°

Now, in ΔXOD

sin45° = XD/OX

1/√2 = XD/5

5/√2  = XD...(1)

In ΔYOD

sin45° = YD/OY

5/√2  = YD...(2)

Adding (1) and (2), we get

XD + YD = 5/√2 + 5/√2

XY = 5√2

Hence, the length of chord XY is 5√2.

To learn more about the length of the chord from the given link

https://brainly.com/question/26094865

#SPJ1

Therefore , the solution of the given problem of trigonometry comes out to be 2 * sin²(ɵ) * cos²(ɵ)  the claimed identity has been established.

Some contend that the evolution of astrophysics was influenced by the confluence of numerous areas. Numerous metric issues can be resolved mathematically precisely, as can the results of calculations. Trigonometry is the study of the six basic geometric calculations from a scientific perspective. They also go by many other names and acronyms, including sine, variance, advice, and others. (csc).

Here,

The identified person is:

=>  cot²(ɵ) * sin²(ɵ) + tan²(ɵ) * cos²(ɵ)

=>  cot(ɵ) = 1/tan(ɵ)

=> tan(ɵ) = 1/cot(ɵ)

=> (1/tan(ɵ))² * sin²(ɵ) + (1/cot(ɵ))² * cos²(ɵ)

We may square the reciprocals by applying the formula (a/b)² = a²/b²:

=> 1/(tan²(ɵ)) * sin²(ɵ) + 1/(co²(ɵ)) * cos²(ɵ)

=> sin²(ɵ) / tan²(ɵ) + cos²(ɵ) / cot²(ɵ)

=> tan²(ɵ) + 1 = sec²(ɵ)

=> cot²(ɵ) + 1 = csc²(ɵ)

=> sin²(ɵ) / sec²(ɵ) + cos²(ɵ) / csc²(ɵ)

=> 1/cos²(ɵ) = sec²(ɵ)

=> 1/sin^2(ɵ) = csc^2(ɵ)

=> sin²(ɵ) * cos²(ɵ) + cos²(ɵ) * sin²(ɵ)

=> sin²(ɵ) * cos²(ɵ) + sin²(ɵ) * cos²(ɵ)

Step 6 is to group similar terms.

=> 2 * sin²(ɵ) * cos²(ɵ)

And since we've found the original expression, the claimed identity has been established.

To know more about trigonometry visit:

https://brainly.com/question/29002217

#SPJ1

The solution is all values of x greater than -9.

The correct graph for the given inequality "Negative 3x - 7 < 20" is:

From negative 10 to positive 10, a number line runs. An open circle shows up at negative 9. From negative 9 to positive 10, the number line is shaded.

To chart the arrangement, we initially confine the variable by adding 7 to the two sides of the imbalance:

Negative 3x - 7 + 7 < 20 + 7

Negative 3x < 27

Next, we divide both sides by -3, remembering to flip the inequality sign since we're dividing by a negative number:

Negative 3x/-3 > 27/-3

x > -9

Therefore, the arrangement is all upsides of x more prominent than - 9. Since these are the values that satisfy the inequality, we graph this by drawing an open circle at -9 on the number line and shading all values to the right of -9.

know more about inequality visit:

https://brainly.com/question/30231190

#SPJ1

Step-by-step explanation:

+ 1.25

every new term is the previous term + 1.25.

with starting value -1.75

f(n) = 1.25n - 1.75

The position of point S after dilating will be half of the original. The dilated point S' has been shown below.

What is dilation?

Using a modification known as dilation, an object can be resized. Through dilatation, the objects can be resized or enlarged. This transformation results in a shape that is a perfect replica of the original image. The form's dimensions do vary, though. An expansion or contraction of the original form is required for a dilatation. This shift is referred to as a scale factor.

We are given a graph showing position of point S.

Now, on dilating the point by a scale factor of [tex]\frac{1}{2}[/tex], we get that the point will be located at half of the original.

The point has been located and attached in the image below.

Hence, the required solution has been obtained.

Learn more about dilation from the given link

https://brainly.com/question/30240987

#SPJ1

Mambo needs to save R2,322.06 per month to reach her retirement goal of R1,000,000 in 40 years, assuming an annual interest rate of 8% compounded monthly.

Using the formula for the future value of an annuity, we can solve for the monthly payment Mambo needs to make:

[tex]FV = P * [(1 + r/n)^{(nt)} - 1]/(r/n)[/tex]

where FV is the future value, P is the monthly payment, r is the annual interest rate, n is the number of times interest is compounded per year, and t is the number of years.

Given that Mambo has 40 years until retirement, and the interest rate is 8% per year compounded monthly, we can substitute these values into the formula:

[tex]FV = 1,000,000 \\P = ?\\r = 0.08\\n = 12\\t = 40 \\1,000,000 = P * [(1 + 0.08/12)^(12*40) - 1]/(0.08/12)[/tex]

Solving for P, we get:

P = 2,322.06

To know more about annual interest rate, here

brainly.com/question/30573341

#SPJ4

--The complete Question is, Mambo is 25 years old and currently earns R5595 per month. She wants to retire at age 65 and wishes to have R1,000,000 by then. Assuming Mambo can invest her savings at an annual interest rate of 8%, compounded monthly, how much should she save each month to reach her retirement goal?--

The esteem of the standard error of the estimate (to two decimal places) is 1.34.

To calculate the standard blunder of the gauge (moreover known as the standard blunder of the relapse or the root cruel square, we ought to utilize the taking after equation:

SE = sqrt [ (Σ(y - yhat)[tex]^{2}[/tex]) / (n - k) ]

yhat = 0.471x + 2.606

We too know that there are 5 perceptions, and there's one free variable (x). Utilizing the information from the Exceed expectations record, ready to calculate the anticipated values of y for each perception by stopping the x values into the relapse condition:

yhat1 = 2.696

yhat2 = 3.638

yhat3 = 4.581

yhat4 = 5.524

yhat5 = 6.466

SE = sqrt [ ( (4.75 - 2.696)[tex]^{2}[/tex] + (5.36 - 3.638)[tex]^{2}[/tex]+ (5.95 - 4.581)[tex]^{2}[/tex] + (6.66 - 5.524)[tex]^{2}[/tex]+ (7.03 - 6.466)[tex]^{2}[/tex]) / (5 - 2) ]

SE = sqrt [ (5.3546) / 3 ]

SE = 1.335

To learn about standard error visit:

https://brainly.com/question/30667112

#SPJ4

Answer: The dividend yield is the annual dividend payment divided by the stock's current market price, expressed as a percentage.

Dividend yield = (Annual dividend payment / Stock's current market price) x 100%

In this case:

Annual dividend payment = $1.98

Stock's current market price = $41.68

Dividend yield = ($1.98 / $41.68) x 100% = 4.75%

Therefore, the dividend yield for AT&T is 4.75%.

Step-by-step explanation:

The value of arc PQ is 110°

The circumference of a circle is the length of the 360 degree arc of that circle. Therefore the sum of the arc on a circumference of a circle is 360°

Therefore ,

8x-10+ 6x + 10x+10 = 360

24x -10+10 = 360

24x = 360

divide both sides by 24

x = 360/24

x = 15

therefore the value of x is 15

Arc PQ = 8x -10

substitute 15 for x

ArcPQ = 8×15-10

= 120-10

= 110°

therefore the value of arc PQ is 110°

learn more about circumference from

https://brainly.com/question/29644055

#SPJ1

Answer:

To write the equation of the line that passes through the points (2, -4) and (0, -4), we can use the point-slope form of a linear equation, which is:

y - y1 = m(x - x1)

Where (x1, y1) is one of the points on the line, and m is the slope of the line.

In this case, both points have the same y-coordinate, which means that the line is horizontal and has a slope of 0. We can choose either point to use in the equation, so let's use (2, -4):

y - (-4) = 0(x - 2)

Simplifying this equation, we get:

y + 4 = 0

y = -4

So the equation of the line that passes through the points (2, -4) and (0, -4) is y = -4, which is a horizontal line at y-coordinate -4.