Answer:d
Explanation:
2.Photosynthesis and combustion of coal are two chemical reaction taking place.How can you describe both reactions on the basis of energy transfer?
What role does each type of chemical play in the firework
Answer: Antimony: Antimony is used to create firework glitter effects. Barium: Barium is used to create green colors in fireworks,
Explanation:
Answer:
Explanation:Antimony: Antimony is used to create firework glitter effects. Barium: Barium is used to create green colors in fireworks,
a terminal alkyne was treated with nanh2 followed by propyl iodide. the resulting internal alkyne was treated with ozone followed by water, giving only one type of carboxylic acid. provide a systematic, iupac name for the internal alkyne.
The systematic Iupac name for the internal alkyne is : 4-octyne
When only one type of carboxylic acid is made the internal alkyne will be symmetric and the compounds can be 3-hexane or 4-octyne but given that one of the reactants is propyl iodide. Therefore
The Internal alkyne will have an Iupac name 4-octyne
Hence we can conclude that the systematic Iupac name for the internal alkyne is 4-octyne
Learn more about 4-octyne : https://brainly.com/question/24355559
what object has a mass of 10 grams and a volume of 2 mL
Answer:
Destiny = 5 g/ml
Explanation:
The formula for density is d=
Knowing this, divide your mass by volume:
10 g / 2 ml = 5 g/ml
Final answer:
Destiny = 5 g/ml
explain why nitrogen diffuses faster than clorine
which of the following is the most dangerous type of radiation?
gamma decay, alpha decay, beta, decay, they are all equally dangerous
Answer:
gamma decay
Explanation:
gamma rays have the highest frequency on the EM spectrum, which makes them the most dangerous.
how does one determine a molecular formula from the epirical formula
Answer:
C
Explanation:
Identify the limiting reactant when 9.65-g H2SO4 reacts with 6.10-g of NaOH.
Answer:
3.56
Explanation:
Answer the following questions.
P1) Matching.
Complete the table with the data from the lab. First, calculate and enter the mole ratio in the chart, then enter the volumes of the precipitates.
The mole ratio can be seen below and the volume of each precipitate is 60 mL.
A mole ratio refers to a conversion factor that compares the quantities of two chemicals in moles in a chemical laboratory experiment.
Mole ratio For 1:
= 10 mL : 50 mL= 1 : 5 mLMole ratio For 2:
15 mL : 45 mL= 1 : 3 mLMole ratio For 3:
20 mL : 40 mL1 : 2 mLMole ratio For 4:
30 mL : 30 mL1 mL : 1 mLMole ratio For 5:
40 mL : 20 mL2 : 1 mLMole ratio For 6:
45 mL : 15 mL3 : 1 mLMole ratio For 7:
50 mL : 10 mL5 : 1 mLSince the parameters from the left side of the diagram are not shown, we will assume that the volumes for each precipitate are the addition of both volumes in each column.
By doing so, we have:
1.
(10 +50) mL = 60 mL2.
(15 + 45) mL = 60 mL3.
(20 + 40)mL = 60 mL4.
(30 + 30) mL = 60 mL5.
(40 + 20)mL = 60 mL6.
(45 + 15) mL = 60 mL7.
(50 + 10)mL = 60 mLLearn more about mole ratio here:
https://brainly.com/question/19099163
25.0g of iron is heated to 100.0 and then placed in 50.0 g of water in a insulated calorimeter. the initial temperature of the water is 38.00. the specific heat of water is 4.181j/g and the specific heat if iron is 0.45j/g. what is the final temp of the water and the iron?
Answer:
Approximately [tex]41.2\; {\rm ^{\circ} C}[/tex].
Explanation:
Let [tex]t\; {\rm ^{\circ} C}[/tex] be the final temperature of the water and the iron.
Temperature of the water would be increase by [tex](t - 38.00)\; {\rm ^{\circ} C}[/tex].
Temperature of the iron would be reduced by [tex](100.0 - t)\; {\rm ^{\circ} C}[/tex].
Let [tex]c[/tex] denote the specific heat of each material. Let [tex]m[/tex] denote the mass of the material. For a temperature change of [tex]\Delta t[/tex], the energy change involved would be:
[tex]Q = c\, m \, \Delta t[/tex].
The energy that the water need to absorb would be:
[tex]\begin{aligned}& Q(\text{water, absorbed}) \\ =\; & c(\text{water}) \, m(\text{water})\, \Delta t (\text{water}) \\ =\; & 4.181\; {\rm J \cdot g^{-1} \cdot K^{-1}} \times 50\; {\rm g} \times (t - 38.00)\; {\rm ^{\circ} C} \\ =\; & (209.05\, t - 7943.9)\; {\rm J} \end{aligned}[/tex].
The energy that the iron would need to release would be:
[tex]\begin{aligned}& Q(\text{iron, released}) \\ =\; & c(\text{iron}) \, m(\text{iron})\, \Delta t (\text{iron}) \\ =\; & 0.45\; {\rm J \cdot g^{-1} \cdot K^{-1}} \times 25.0\; {\rm g} \times (100.0 - t)\; {\rm ^{\circ} C} \\ =\; & (1125 - 11.25 \, t)\; {\rm J} \end{aligned}[/tex].
Since this calorimeter is insulated, the energy that the iron had released would be equal to the energy that the water had absorbed:
[tex]Q(\text{water, absorbed}) = Q(\text{iron, released})[/tex].
[tex]209.05\, t - 7943.9 = 1125 - 11.25\, t[/tex].
[tex]t \approx 41.2[/tex].
Thus, the final temperature of the water and the iron would be approximately [tex]41.2\; {\rm ^{\circ} C}[/tex].
How did the atomic model change due to the research of thomson, rutherford, and bohr?
Answer:
Thomson's plum pudding model of the atom had negatively-charged electrons embedded within a positively-charged "soup." Rutherford's gold foil experiment showed that the atom is mostly empty space with a tiny, dense, positively-charged nucleus. Based on these results, Rutherford proposed the nuclear model of the atom.
In the conclusion to the snake mole lab, you have to convert 3.45 moles of (NH4)2S04 to
grams. What is the molar mass of (NH4)2504?
why do i have white spots on my teeth after brushing?
Can someone help?
Name the compound:
CH=benzene
Why?
benzene is represented by the empirical formula CH, which indicates that a typical sample of the compound contains one atom of carbon (C) to one atom of hydrogen (H).
----(Is this what you meant???)
9.
a
What is the energy of a wave having a frequency of 5.71 x 1013 Hz?
Answer:
[tex] \huge{3.783 \times {10}^{ - 19} \: J}[/tex]
Explanation:
The energy of the wave can be found by using the formula
E = hfwhere
E is the energy
f is the frequency
h is the Planck's constant which is
6.626 × 10-³⁴ Js
From the question we have
E = 6.626 × 10-³⁴ × 5.71 × 10¹³
We have the final answer as
[tex]3.783 \times {10}^{ - 19} \: J[/tex]
Hope this helps you
Most stars are part of the main sequence of stars in the HR diagram
Question 2 options:
True
False
Which of these codes is best for creating websites?
The most used codes for the creation of websites are CSS and HTML.
What is a code?A code can be defined as the basic unit that composes a website. This implies that by using a code you can create a website from scratch and by the end of the process you should have a functional and complete website.
What codes are used?In website creation, the most common codes are CSS and HTML.
HTML: This is the most common code used and also one of the easiest to understand and use.
CSS: This code is not as popular as HTML but it is still a very popular code used by many people creating websites.
Note: This question is incomplete because the options are not given; due to this, I answered it based on general knowledge.
Learn more about websites in: https://brainly.com/question/1631583?referrer=searchResults
What is a trial? please
Which dosage form is a semisolid preparation that contains very small solid particles that are suspended in a liquid
A GEL is a semisolid preparation that contains very small solid particles that are suspended in a liquid. A gel always contains an agent (e.g., agarose) that provides stiffness to the preparation.
A gel is a semisolid preparation that contains a gelling agent which provides stiffness to the preparation.
The gelling agent can be, for example, agarose (this gelling agent is used to prepare gels in electrophoresis).
In an agarose gel, agarose molecules are organized into three-dimensional (3D) structures similar to pores, which allow the passage of DNA fragments during electrophoresis.
Learn more about agarose gel here:
https://brainly.com/question/5661562
The bowl of fruit has a mass of 2.2 kg.
What net force must act on the bowl of fruit to make it accelerate to the right
at a rate of 4.4 m/s2? (Hint: Use F = ma.)
A. F = 9.68 N right
B. F = 9.68 N left
C. F = 6.60 N left
D. F= 6.60 N right
Taking into account the Newton's second law, the correct answer is option A. F = 9.68 N right
In first place, acceleration in a body occurs when a force acts on a body.
Newton's second law states that a force will change the speed of an object because the speed and/or direction will change. These changes in velocity are called acceleration.
So, Newton's second law defines the relationship between force and acceleration mathematically. This law says that the acceleration of an object is directly proportional to the sum of all the forces acting on it and inversely proportional to the mass of the object
Mathematically, Newton's second law is expressed as:
F= m×a
where:
F = Force [N] m = Mass [kg] a = Acceleration [m/s²]In this case, you know:
F= ? m= 2.2 kg a= 4.4 m/s²Replacing in Newton's second law:
F= 2.2 kg× 4.4 m/s²
Solving:
F= 9.68 N
Finally, As the bowl of fruit accelerates to the right, the correct answer is option A. F = 9.68 N right
Learn more about the Newton's second law:
brainly.com/question/23845187?referrer=searchResults
brainly.com/question/13959891?referrer=searchResults
Help me in the 10 the number. Clue- helium and hydrogen make up the first of these
Answer:
helium and hydrogen make up the first of these
the answer is period
A glacier can travel over the surface of Earth and reshape it. The chart describes three things a glacier can do.
Glacial Actions:
1. breaks large rocks into smaller ones
2. pushes broken rocks ahead of itself
3. leaves broken rocks behind when the front edge melts
Which terms BEST describe these glacial actions in the order as presented?
a. weathering, erosion, deposition
b. erosion, chemical weathering, deposition
c. deposition, weathering, erosion
d. chemical weathering, mechanical weathering, erosion
Answer:
A
Explanation:
Fill in the blanks:
87 pg = [? ]x10^[?]g
87 picograms are equivalent to [tex]8.7\times 10^{-11}[/tex] grams.
This is a unit problem, in which a derived unit must translated into a fundamental unit. A picogram is a equivalent to a trillionth of a gram, which is the fundamental SI mass unit. Mathematically speaking, we have the following equivalence:
[tex]1\,pg = 1\times 10^{-12}\,g[/tex]
Now we proceed to find the equivalent value for this case:
[tex]87\,pg[/tex]
[tex]87\times 10^{-12}\,g[/tex]
[tex]8.7\times 10^{-11}\,g[/tex]
87 picograms are equivalent to [tex]8.7\times 10^{-11}[/tex] grams.
To learn more on unit conversions, we kindly invite to check this verified question: https://brainly.com/question/13016491
Find the molecular formula of ethylene glycol, used in antifreeze, if its empirical formula is CH3O and its molar mass is 62 g/mol.
The molecular formula of the ethylene glycol is C₂H₆O₂.
From the question given above, the following data were obtained:
Empirical formula = CH₃O Molar mass of compound = 62 g/mol Molecular formula =?Molecular formula = empirical × n = molar mass
[CH₃O]n = 62
[12 + (3×1) + 16]n = 62
31n = 62
Divide both side by 31
n = 62 / 31
n = 2
Molecular formula = [CH₃O]n
Molecular formula = [CH₃O]₂
Molecular formula = C₂H₆O₂
Learn more about empirical and molecular formula: https://brainly.com/question/25820990
Butane (C4 H10(g), Delta. Hf = â€"125. 6 kJ/mol) reacts with oxygen to produce carbon dioxide (CO2 , Delta. Hf = â€"393. 5 kJ/mol ) and water (H2 O, Delta. Hf = â€"241. 82 kJ/mol) according to the equation below. 2 upper C subscript 4 upper H subscript 10 (g) plus 13 upper o subscript 2 (g) right arrow 8 upper C upper O subscript 2 (g 0 plus 10 upper H subscript 2 upper O (g). What is the enthalpy of combustion (per mole) of C4H10 (g)? Use Delta H r x n equals the sum of delta H f of all the products minus the sum of delta H f of all the reactants. â€"2,657. 5 kJ/mol â€"5315. 0 kJ/mol â€"509. 7 kJ/mol â€"254. 8 kJ/mol.
The enthalpy of this reaction is -5315 KJ/mol.
The equation of the reaction is;
2C4H10(g) + 13O2(g) -----> 8CO2 (g) + 10H2O(g)
We know that the enthalpy of reaction can be obtained from the enthalpy of formation of the reactants and products as follows;
ΔHrxn = ΔHf(products) - ΔHf(reactants)
We have the following information from the question;
ΔHf C4H10 = - 125. 6 kJ/mol
ΔHf CO2 = - 393. 5 kJ/mol
ΔHf H2O = - 241. 82 kJ/mol
ΔHf O2 = 0 KJ/mol
Hence;
[(8 × (- 393. 5 )) + (10 × (- 241. 82))] - [2( - 125. 6))]
= -5315 KJ/mol
Learn more: https://brainly.com/question/13164491
 A car has a displacement of 480 km to the east in eight hours. What is its velocity in kilometers per hour?
[tex] \sf = \frac{480}{8} = 60[/tex]
Answer:
The velocity of the car is 60 Km/hour to the east.
Hope you could get an idea from here.
Doubt clarification - use comment section.
When heat is being transferred away from a substance, the resulting phase change graph is known as a ____ curve.
a. Cooling
B. Heating
Calculate the energy of a proton of light with a frequency of 8.5x1014 Hz.
Answer:
[tex] \huge{5.632 \times {10}^{ - 19} \: J}[/tex]
Explanation:
The energy of the proton can be found by using the formula
E = hfwhere
E is the energy in J
f is the frequency in Hz
h is the Planck's constant which is
6.626 × 10-³⁴ Js
From the question we have
E = 6.626 × 10-³⁴ × 8.5 × 10¹⁴
We have the final answer as
[tex]5.632 \times {10}^{ - 19} \:J[/tex]
Hope this helps you
How many molecules does 1 mole of Oz gas have?
awnser : 6.02×1023 molcules
noble gases are used in many situations where a safe and constant environment must be maintained. for example, helium is used to provide a protective atmosphere for making fiber optics and semiconductors. argon is used to fill incandescent and flourescent light bulbs to prevent oxygen from corroding the hot filament. why are noble gases used in these situations?
Answer:
Because they do not naturally react with other elements
Explanation:
Since noble gases do have a fulfilled valence shell, they do not react with other elements because they're already stable by the themselves.