Answer:
Explanation:
Resultant of 12 and 3 ohm in series = 15 ohm
Resultant of 6 and 3 ohm = 9 ohm
Total resultant resistance of circuit = 15 x 9 / (15 + 9)
= 5.625 ohm
current drawn from battery = 4 / 5.625
= .711 A
ii )current through 12 ohm = 4 / (12 + 3 ) , because potential diff over 12 and 6 ohm will be 4 V .
current through 12 ohm = .267 A
iii )
current through 6 ohm
= .711 - .267
= .444 A
potential difference
= .444 x 6
= 2.664 V .
By starting with a falsifiable hypothesis and proceeding to gather data and ensure replicability, a scientist can contribute to the potential formation of a(n)
Answer:
theory
Explanation:
A scientist can contribute to the formation of a theory in a particular subject by conducting research along the line of that subject.
Conducting research requires the formation of a hypothesis and testing the hypothesis by conducting a relevant experiment during which data are gathered, analyzed, and interpreted in order to falsify or accept the hypothesis.
A good experiment must be replicate-able. When the same experiment is repeated by different independent researchers and the same conclusion is arrived at, this could potentially lead to the formation of a theory.
Hence, a scientist can contribute to the formation of a theory by conducting an experiment with replicability in order to test a hypothesis.
Janaki Temple and Pashupatinath Temple are increasing our pride how
Answer:
Janaki temple and Pashupatinath Temple are found in Nepal. These structures are religious and they increase the pride of the country through tourism. These temples are important in the country and are mostly visited by tourists.
This also helps to bring in income for the country and also helps by attracting many visitors and a corresponding development of its tourism industry.
The gas in a balloon has T=280K and V=0.0279m^3. If the temperature increases to 320K at constant pressure, what is the new volume of the balloon? (Hint: n and P are constant) (Unit= m^3)
Answer:
[tex]\boxed{ V_{2}= 0.03189 m^3}[/tex]
Explanation:
According to Charles Law
=> [tex]\frac{V_{1}}{T_{1}} = \frac{V_{2}}{T_{2}}[/tex]
Where [tex]V_{1}[/tex] = 0.0279 m³, [tex]T_{1}[/tex] = 280 K and [tex]T_{2}[/tex] = 320 K
=> [tex]\frac{0.0279}{280} = \frac{V_{2}}{320}[/tex]
=> [tex]V_{2}[/tex] = 0.03189 m³
You and a friend are on a swing set and her swing is slightly longer than yours. If you both start swinging at the same time, from the same height, where will she be after you have completed one complete swing back and forth?
a. She will still be at the same height as you.
b. She will be slightly higher than you.
c. She will be slightly lower than you but moving downward away from you.
d. She will be slightly lower than you but moving upward toward you.
Answer:
d. She will be slightly lower than you but moving upward toward you.
Explanation:
Since your swing is slightly shorter than your friend's swing, then you will have more angular speed than your friend. Angular speed increases with a decrease in radius. The closer the body is to the center, the faster the body swings. By the time you would have completed one complete swing back and forth, your friend will just be moving towards you, and she will be slightly lower than you but moving upwards towards you. This principle is the same reason gymnasts pull their limbs closer to their body when they need to swing faster.
What happens when white light shines through a translucent, red, glass window? a) All colors of light except red are transmitted through the glass. b) Red light is transmitted through and reflected by the glass c) Red light is absorbed by the glass d) all colors except red are reflected by the glass
Answer:
b. Red light is transmitted through and reflected by the glass
Explanation:
Give me brainliest plz!
All of the wavelengths of the red light are absorbed when it passes through a translucent red glass window, but the red light is transmitted and reflected.
What happens when white light shines through red glass?Red light emerges from the other side of a white light source that has been passed through a red filter. This is so that only red light can pass through the red filter. The spectrum's other colors (wavelengths) are absorbed. Similar to this, a green filter only lets through green light.White light is colorless light that contains all the wavelengths of the visible spectrum. Only specific wavelengths of white light are filtered through transparent or translucent things.Through a colorful glass, white light shines through. Except for the color it is shining through, all light wavelengths are absorbed by the glass.Therefore, if the red light passes through a translucent, red, glass, window, all the wavelengths are absorbed but the red light is transmitted and reflected.
Therefore, the correct answer is option b) Red light is transmitted through and reflected by the glass.
To learn more about light refer to:
https://brainly.com/question/12002703
#SPJ2
How does increasing frequency affect the crests of a wave?
They get higher.
They get closer together.
They get lower.
They get farther apart.
Answer:
they get closer together
Explanation:
Can someone please help me?
An alien spaceship is 650 m above the ground and moving at a constant velocity of 175 m/s upwards.
How high above the ground is the ship after 5 seconds?
Answer:
1525 meters above ground
Explanation:
So to do this you will need to write this in slope intercept form or [tex]y=mx+b[/tex]. So 650 would be the b, 175 would be the m, and the x would be 5 so the equation would be [tex]y=175(5)+650[/tex] so if you solve or simplify the equation you will get 1525 meters above the ground and that would be our final answer.
A sports car moving at constant velocity travels 120m in 5.0s. If it then brakes and comes to a stop in 4.0s,what is the magnitude of it's acceleration?
✔ First calculating the speed :
V = d(in m)/t(in s)
V = 120/5 V = 24 m/s✔ You now know the average car's speed, is time it takes to stop it completely, so you can calculate its acceleration :
a = V/t
a = -24/4 a = 6 m/s² The car has an acceleration of 6 m/s².Calculating heat gained, need help!!!
Q=(m)(c)(triangle T)
trial 1:
Q=(0.4)(4.186 J/kg)(78)=?
trial 2:
Q=(0.6)(4.186 J/kg)(78)=?
trial 3:
Q=(0.45)(4.186 J/kg)(75)=?
Explanation:
q = mCΔT
where m is mass,
C is specific heat capacity,
and ΔT is change in temperature.
Make sure all your units match. Assuming the substance is water, C = 4186 J/kg/°C.
Trial 1:
q = (0.4 kg) (4186 J/kg/°C) (78°C)
q = 130,600 J
Trial 2:
q = (0.6 kg) (4186 J/kg/°C) (78°C)
q = 195,900 J
Trial 3:
q = (0.45 kg) (4186 J/kg/°C) (75°C)
q = 141,300 J
Law of conservation
of momentum
Answer:
Explanation:
Law of conservation of momentum is applied in solving collision problem. When two body collides, their momentum after collision can be determined using the law.
The law States that the sum of momentum of two bodies before collision is equal to the sum of their momentum after collision. Before collision, both bodies moves with a different velocity while during some cases, the bodies moves with a common velocity after collision.
Whether they move with or without the same velocity depends on the type of collision that exists between them after the collision. After collision, some object sticks together and move with a common velocity while some doesn't.
If the bodies sticks together after collision, the type of collision that occur is inelastic (energy is not conserved) and if they splits after collision, the type of collision that occur is an elastic collision (energy is conserved).
Let m1 and m2 be the masses of the bodies
u1 and u2 be their velocities before collision
v1 and v2 be their velocities after collision.
According to the law;
m1u1 + m2u2 = m1v1 + m2v2
Note that momentum = mass × velocity of the body.
The mass density of a certain planet is uniform throughout the volume of the planet. If r is the distance from the center of the planet to a point mass inside the planet, the gravitational force on the mass is
Answer:
F= GMm/r^2
Explanation:
According to newtons formula for gravitation,
F= GMm/r^2
Question 1 of 10
What is a neutron
A. A particle inside the nucleus that has no charge
B. A positive particle inside the nucleus
O C. A negative particle outside the nucleus
O D. A negative particle inside the nucleus
Answer:
The neutron is a subatomic particle, symbol
n
or
n0
, with no electric charge and a mass slightly greater than that of a proton. Protons and neutrons constitute the nuclei of atoms. Since protons and neutrons behave similarly within the nucleus, and each has a mass of approximately one atomic mass unit, they are both referred to as nucleons.[6] Their properties and interactions are described by nuclear physics.
Explanation:
pls mark me as BRAINLIEST
Velocity is a description of an object’s blank
Velocity is the description of an object's motion from one point to another.
It tells the speed with which the trip is completed, and the direction from the start-point to the end-point. It tells nothing about any twists, turns, loops, bends, or stops along the way.
a skydiver jumped out of a plane and fell 9 miles to the ground. his average speed while falling was 174 miles/hour. how much time did the dive last?
Answer:
t = 0.051 seconds
Explanation:
Given that,
A skydiver jumped out of a plane and fell 9 miles to the ground. It means 9 miles is the distance covered.
The average speed of the skydiver is 174 miles/hour
We need to find the time for which he dive last. It means t is the time taken. Total distance covered divided by time taken is called average speed. So,
[tex]v=\dfrac{d}{t}\\\\t=\dfrac{d}{v}\\\\t=\dfrac{9}{174}\\\\t=0.051\ s[/tex]
So, a skydiver dive for 0.051 seconds.
Barry walks from one end to the other of a 30-meter long moving walkway at a constant rate in 30 seconds, assisted by the walkway. When he reaches the end, he reverses direction and continue walking with the same speed, but this time it takes him 120 seconds because he is traveling against the direction of the moving walkway. If the walkway were to stop moving, how many seconds would it take Barry to walk from one end of the walkway to the other
Answer:
Δt=48 s
Explanation:
v: Barry's speed
v.: speed of the walkway
Δx=30 m
Δt1=30 s , Δt2=120 s
|Δx1|=|Δx2|
Δx=v*Δt
=> (v+v.)*30=(v-v.)*120
v=v.*5/3
30=(v+v.)*30
=> 30=(5v./3 +v.)*30
v.=3/8 m/s
v=5v./3 , v.=3/8
=> v=5/8 m/s
Δx=v*Δt
30=5/8 *Δt
Δt=48 s
A small child has a wagon with a mass of 10 kilograms. The child pulls on the wagon with a force of 2 newtons. What is the acceleration of the wagon?
Answer:
0.2 m/s²Explanation:
Given,
Mass ( m ) = 10 kg
Force ( f ) = 2 Newtons
Acceleration ( a ) = ?
Now, let's find the acceleration :
We know that,
[tex]f = ma[/tex]
Plug the values
[tex]2 = 10a[/tex]
Swap the sides of the equation
[tex]10a = 2[/tex]
Divide both sides of the equation by 10
[tex] \frac{10a}{10} = \frac{2}{10} [/tex]
Calculate
[tex]a = 0.2 \: {metre \: per \: second \: }^{2} [/tex]
Hope this helps...
Best regards!!
The density of water is 1000 kg m^3. What is the value expressed in gcm^-3 units? please help me..
(1) 1000 (2) 100 (3) 1 (4) 0.1 (5) 0.01
Here's the neat, cool way to convert units like this:
-- 1 kilogram = 1,000 grams
-- 1 meter = 100 centimeters
So . . . . .
(1000 kg/m³) x (1000 g/kg) x (1 m/100 cm)³ =
(1,000 kg/m³) x (1,000 g/kg) x (1 m³/1,000,000 cm³) =
(1,000 x 1,000 x 1 / 1,000,000) (kg-g-m³ / m³-kg-cm³) = 1 g/cm³
Imagine that your standing on a beach but cannot swim. Your friend encourages you to walk into the surf zone created by incoming deep-water waves that have a wavelength of 30 meters. Would it be safe to walk out to where the waves are breaking? Explain how you arrived at your answer.
Answer:
It would not be safe to walk out to where waves are breaking due to the effect of rip currents
Explanation:
The water depth in the surf zone is between 5 to 10 meters deep and with a wavelength of 30 meters, the speed of the wave is considerably fast such that control for safety may be difficult
Also the speed of the wave is directly related to the depth of the water which means that where the wave described above is fast as well as the rip current, also the water depth is expected to be considerable for a non swimmer
It is best to seek for sign post regarding safe areas and do not go into the water where there are no lifeguards or marked safe zones.
It won't be safe to walk out to where the waves are breaking.
This is because the wavelength is 30 meters which is a characteristic of
areas with significant water depth in the range of 5-11 meters.Under these
conditions the waves are usually very fast and may get swept with the
current from the water waves when trying to run from it.
It is recommended that we stay in areas where the depth is noted as not
being much and should always seek help and clarity from the life guards so
as to prevent drowning and death.
Read more on https://brainly.com/question/17125479
Which is the best example of muscular endurance
Answer:
personally I'd say C by do not know if that is the exact answer
A wire carrying a 35.0 A current passes between the poles of a strong magnet such that the wire is perpendicular to the magnet's field, and there is a 2.55 N force on the 3.00 cm of wire in the field. What is the average field strength (in T) between the poles of the magnet
Answer:
7.65 T
Explanation:
From the question,
Using,
F = BILsinФ......................... Equation 1
Where F = Force, B = magnetic field strength, I = current, L = Length, Ф = Angle.
Make B the subject of the equation
B = F/ILsinФ........................Equation 2
Given: F = 2.55 N, I = 32 A, L = 3.00 cm = 0.03 m, Ф = 90° (perpendicular)
Substitute into equation 2
B = 2.55/(32×0.03×sin90°)
B = 2.55/0.96
B = 7.65 T
Let's say that we have a pilot that is dropping a package from a plane that is flying horizontally at a constant speed. If we neglect air resistance when the package hits the ground what would be the horizontal location of the package with respect to the plane?
Answer:
The package will be directly below the location of the plane.
Explanation:
Look up projectile motion for more information. The horizontal speed of the package is separate from the vertical speed of the package. The vertical speed of the falling package will be based on the rate of acceleration and the height of the package when dropped. The horizontal speed of the package will be the same as the plane so the package will remain directly below the plane the entire time until the package hits the ground.
The horizontal location of the package with respect to the plane will be parallel to the plane if no air resistance act on it. The pack will be straight to down because of the gravity.
What is gravitational force?Gravitational force is the force by which an object attracts other objects into its center of mass. Earth attracts every objects in its surface towards its center that's why we are all standing on the ground.
The gravitational force acting on a body is dependent on its mass and height. From an object falling from a height will experience a positive acceleration downwards to the ground.
If any air resistance is present there, the path of motion of the falling object from the height might be changed randomly. Here, the package is falling from plane without any air resistance and it will be straight down to the plane.
To find more on gravitational force, refer here:
https://brainly.com/question/12528243
#SPJ5
Three books are at rest, in equilibrium, on a horizontal table as
shown. The weight of each book, which is equal to the force
gravity exerts in the downward direction, is given. What is the
net force on the middle book?
Answer:
Net force = 0
Explanation:
Short answer: if the middle book is not acceleration in any direction, the net force is zero.
Long answer: refer to the attached free-body diagram (FBD) to see why the net force is zero. Skills to draw FBD are essential in solving problems in statics.
Top book exerts -mg (downwards) on the middle book.
Middle book exerts -mg (downwards) on the bottom book.
Total downward force is -mg-mg = -2mg
By Newton's third law, when an object is not in motion, reaction equals action of -2mg in the opposite direction, therefore the reaction (upwards) is +2mg.
This makes the net force of -2mg (downwards) + 2mg (upwards) =0
On a horizontal table, three books are resting and balanced. The net force on the middle book will be equal to zero.
What is equilibrium?Equilibrium is the condition of an object when two or more opposing forces, whether internal, external or a combination of both, act on the body and cancel one another out to maintain the object in the same state as it was. The Latin term for weight or balance, libra, serves as the origin of the word equilibrium.
According to the question :
The net force is 0 if the middle book does not accelerate in any direction.
The Middle book is impacted negatively (downwards) by the top book.
The middle book pulls down on the lower book by -mg.
The total downward force is -2mg = (-mg-mg)
According to Newton's third rule, a reaction when an item is not moving equals an action of -2mg in the opposite direction, hence the reaction (upwards) is a response of +2mg.
Consequently, the net force of -2mg (downwards) + 2mg (upwards) = 0 is created.
To get more information about Equilibrium :
https://brainly.com/question/28527601
#SPJ2
Bruno the bat flies at a speed of 0.5 m/s in circle of radius 1 m. What is his acceleration?
Very urgent pls help
Answer:
Acceleration is 0.25m/s^2
Explanation:
Given the following :
Speed = 0.5m/s
Radius(r) of circle = 1m
Acceleration round a circular path is given as :
a = v^2 / r
Where
a = acceleration of the body
v = speed / velocity
r = radius
Therefore,
a = v^2 / r
a = (0.5)^2 / 1
a = 0.25m/s^2
A car engine burns gas at 495 K and exhausts to the air at 293 K. What is the highest possible efficiency it could have?
(NO UNIT)
Answer:
59.19%
Explanation:
Step 1:
Data obtained from the question. This include the following:
Input temperature = 495 K.
Output temperature = 293 K.
Efficiency =..?
Step 2:
Determination of the efficiency of the engine.
Efficiency is simply defined as the ratio of output to input times 100. Mathematically, it is expressed as:
Efficiency = output /input x 100
With the above formula, we can calculate the efficiency of the engine as follow:
Input temperature = 495 K.
Output temperature = 293 K.
Efficiency =..?
Efficiency = output /input x 100
Efficiency = 293/495 x 100
Efficiency = 59.19%
Therefore, the efficiency of the engine is 59.19%
Answer:
0.41
Explanation:
Trust me bro
A mass of 1.15 kg of air at 111 kPa and 27 C is contained in a gas-tight, frictionless piston cylinder device. The air is now compressed to a final pressure of 0.84 MPa. During this process, heat is transferred from the air such that the temperature inside the cylinder remains constant. Calculate the work input (in kJ) during this process.
Answer:
Work input W = -200.39 KJ
Explanation:
From the question, we are given;
m = 1.15 kg
Constant temperature T1 = T2 = 27 + 273 = 300k
Since the temperature is constant, we can say that the process is isothermal
P1 = 111 KPa
P2 = 0.84 MPa = 0.84 * 1000 KPa = 840 KPa
Now what we want to calculate is W1-2
Mathematically, for isothermal process;
W1-2 = mRTlnP1/P2
where R can be obtained from table and it is equal to 0.287 KJ/kg.k
Hence;
W1-2 = (1.15)(0.287)(300)(ln 111/840)
W1-2 = 99.015 * -2.023871690525 = -200.39 KJ
Kindly note that the value of the work is negative because work is done on the system and not by the system
Please help me with this question ASAP.
In a a potentiometer circuit, a 1m long potentiometer wire PQ of resistance 10 ohms is connected in series with a cells of e.m.f. 9V with internal resistance 3 ohms Calculate:
i The p.d. across PQ
ii. The e.m.f. of a cell which has a balance point of 75cm.
Answer:
i. 6.923 V
ii. The e.m.f. = 22.5 V
Explanation:
i. The given parameters are;
Length of potentiometer = 1 m
The resistance of the potentiometer = 10 Ω
The e. m. f. of the attached cell = 9 V
The current, I flowing in the circuit = e. m. f/(Total resistance)
The current, I flowing in the circuit = 9 V/(10 + 3) = 9/13 A
The potential difference, p.d. across the 1 m potentiometer wire = I × Resistance of the potentiometer wire
The p.d. across the potentiometer wire = 9/13×10 = 90/13 = 6.923 V
ii) Given that the 1 m potentiometer wire has a resistance of 10 Ω, 75 cm which is 0.75 m will have an e.m.f. given by the following relation;
[tex]\dfrac{E}{R_{balance}} = \dfrac{V}{R_{cell}}[/tex]
Where:
E = e.m.f. of the balance point cell
[tex]R_{balance}[/tex] = Resistance of 75 cm of potentiometer wire = 0.75×10 = 7.5 Ω
[tex]R_{cell}[/tex] = Resistance of the cell in the circuit = 3 Ω
V = e.m.f. attached cell = 9 V
[tex]\dfrac{E}{7.5} = \dfrac{9}{3}[/tex]
E = 7.5*3 = 22.5 V
The e.m.f. = 22.5 V
Which statement describes one feature of a closed circuit? Charges do not flow. Bulbs will not shine. The circuit is broken. The circuit is complete.
I inferred you've referring to a close electrical circuit.
Answer:
The circuit is complete.
Explanation:
A closed electrical circuit is indeed a complete circuit. Also, it allows charges to flow, the bulbs in the circuit will shine and it is not broken.
It is termed closed circuit because there is no brokage in the series of electrical wires or the switch; which may prevent the free flow of current or charges. Thus, a feature that marks closed circuits is that they are complete.
Answer:
The circuit is complete.
Explanation:
8. You have two iron rods which are identical in appearance, but one is a permanent magnet and the other is unmagnetized. What series of simple experiments can you perform, using only the two rods, which will allow you to determine which of the rods is the permanent magnet
Answer:
Explanation: Let assume that bars are labeled A and B
Method 1
Using just the identical appearing bar magnet and unmagnetized iron bar.
Place the end of bar A in the middle of bar B.
If bar A sticks to bar B, then bar A is the magnet and bar B the umagnetized iron bar.
If bar A jumps to one of the ends of bar B, then bar B is the magnet.
Reason been that the magnetic field on a bar magnet is greatest at the two poles where the field comes out of the magnet. The center, between the poles, will be the weakest part of the field.
Method 2
Another solution would be to separate the two by quite some distance, float them on a piece of cork/wood in a plastic bucket or suspend them from long strings, then see which one consistently (eventually) lines up tending towards the Earth’s magnetic field.
Culture creates the context for behavior in society. true or false
Answer:
True every culture is diffrent and culture is the way to grow up, the people or things you live around, or the ways of life you follow or dress.
Explanation: The definition of culture is: means a particular set of customs, morals, codes and traditions from a specific time and place. All of that develops how a person may behave in society.
Answer:
true
Explanation:
just took the quiz
Salt compounds are commonly used to melt ice that forms on sidewalks in the winter. A common chemical that is used to melt sidewalk ice is calcium chloride, CaCl2(s). When calcium chloride dissolves into solution is releases thermal energy which aides in melting
the ice.
The molar mass of water is 18.02 g/mol
The thermal energy, in kilojoules (kJ) that must be released from the calcium chloride,
CaCl2(s), to melt 10.0 kg of ice, expressed in scientific notation is a.bc x 104 k).
46
55
The values of a, b, c, and d.
Answer:
The values of a, b, c and d are
a = 3, b = 3, c = 4 and d = 3
Explanation:
The quantity of heat needed to melt the ice is given by Q = mL where m = mass of ice and L = latent heat of fusion of ice = 334 kJ/kg. This quanity of heat is also the thermal energy needed to be released by the calcium chloride, CaCl₂
Now, the mass of ice = 10 kg. So,
Q = mL
Q = 10 kg × 334 kJ/kg
Q = 3340 kJ
In scientific notation,
Q = 3.34 × 10³ kJ
So the thermal energy needed to be released by the calcium chloride is 3.34 × 10³ kJ
Comparing Q = 3.34 × 10³ kJ with a.bc × [tex]10^{d}[/tex] kJ
So, a = 3, b = 3, c = 4 and d = 3
The values of a, b, c and d are
a = 3, b = 3, c = 4 and d = 3