Answer:
Apparent Motion
Explanation:
Apparent Motion of a star is a scientific term that describes the phenomenon that is observed as a result of the earth's rotation which is based on the area or where the observer is situated, and then the point at which the star is found comparable to the rotation axis of the earth.
This often makes the start to appear like it's moving across the sky.
Hence, A star has APPARENT MOTION; it appears to be moving across the sky as the night progresses.
What happens to cause the tissue around a cut to become swollen, red, and
painful?
A. Fluid and white blood cells move into the tissue from nearby blood
vessels.
B. White blood cells burst and release wastes made by digesting
pathogens.
C. Lymph nodes develop in the tissue and begin trapping pathogens.
D. Chemical messengers released by the tissue cause nearby
muscles to contract and pull on bones.
SUBM
Answer:
The answer is A. Fluid and white blood cells move into the tissue from nearby blood vessels.
Explanation:
Answer:
A is the Answer
Explanation:
I took the test
is
A 0.155 kg arrow is shot upward
at 31.4 m/s. What is its kinetic
energy (KE) when it is 30.0 m
above the ground?
Kinetic energy = 29.912 J
Further explanationGiven
mass = 0.155 kg
vo=initial velocity = 31.4 m/s
h/d=30 m
Required
KE=kinetic energy
Solution
vt²=vo²-2ad⇒vt=final velocity
vt²=31.4²-2.10.30⇒g=10 m/s²
vt²=985.96-600
vt²=385.96 m/s
Kinetic energy (KE)
[tex]\tt KE=\dfrac{1}{2}mv^2\\\\KE=\dfrac{1}{2}\times 0.155.\times 385.96\\\\KE=29.912~J[/tex]
Answer:
The answer is 30.8 (J)
Explanation:
You're welcome
Light is one form of energy that travels in electromagnetic waves. This energy is both (1)
and
electrical. There are many different types of electromagnetic (EM) waves. Most of them cannot be seen by humans.
Our eyes see only a small (2)
of EM waves called visible light Visible light is made up of different colors
The colors are red, orange, yellow, green, blue, indigo, and violet. The colors are due to the different (3)
of
light. The (4)
the wavelength, the less energy the wave has. The shorter the wavelength, the more energy
it has. The (5) wavelength of visible light looks red to us the shortest (6)
of visible light looks
vlolet to us
Answer:
Explanation:
Electromagnetic waves are formed by the interference of both electric and magnetic fields. These include: Microwaves, Radio waves, Infrared, Visible, Ultraviolet, X-ray, and gamma rays. These waves can be arranged in a specific order (called spectrum) with respect to their wavelength or frequency. The higher the wavelength, the lower the frequency. And vice versa.
These waves are transverse, and travels at the same speed (speed of light - 3.0 x [tex]10^{8}[/tex] m/s).
In the given question, the answers are:
1 - Magnetic
2 - Region
3 - Refractive indices
4 - Greater
5 - Higher
6 - Wavelength
A car’s brakes decelerate it at a rate of -1.70 m/s2. What is the time, in seconds, required to slow the car from 15 m/s to 9.0 m/s?
Answer:
t = 3.52 s
Explanation:
Given that,
The deceleration of a car is, a = -1.7 m/s²
The initial velocity of the car, u = 15 m/s
Final velocity of the car, v = 9 m/s
We need to find the time that is required to slow the car from 15 m/s to 9 m/s. The definition of acceleration is :
[tex]a=\dfrac{v-u}{t}\\\\t=\dfrac{v-u}{a}\\\\t=\dfrac{9-15}{-1.7}\\\\t=3.52\ s[/tex]
So, it will take 3.52 seconds to slow the car from 15 m/s to 9 m/s.
Name ten scalar quantity and explain them
Answer:
A scalar is a quantity that is fully described by a magnitude only. It is described by just a single number. Some examples of scalar quantities include speed, volume, mass, temperature, power, energy, and time.
Examples of scalar quantity are:
Distance.
Speed.
Mass.
Temperature.
Energy.
Work.
Volume.
Area.
Explanation:
please mark me as brainliest thank you
True or false? When a change of state starts to occur, the energy supplied changes the temperature but not the internal energy.
Answer:
True
Explanation:
This heat energy allows the change of state to happen, and the temperature remains constant during the process. The amount of energy required to change the state of a substance depends upon the mass and characteristics of that substance. The energy required to change the state of a material is known as the latent heat. During a change of phase the temperature does not change, but the internal energy does. The internal energy is the sum of the kinetic energy of the molecules and the chemical potential energy of the molecules.
How are computers used in education and entertainment? List them.
Answer:
The computers used in education and entertainment are:
Explanation:
Analog computer,Digital COMPUTER,Hybrid Computer
the relationship between m2,cm2,mm2 and km2
Answer:
m2
Explanation:
I just knowyyysydyyyyyyyýdydysyydysysydydhdhhdhdhdhxhchxhhxhc
Answer:
Square Meters to Square Centimeters Conversion
1 Square meter (m2) is equal to 10000 square centimeters (cm2). ... For example, to convert 10 m2 to cm2, multiply 10 by 10000, that makes 100000 cm2 is 10 m2.
cm2↔mm2 1 cm2 = 100 mm2.
The north pole of one bar magnet is near the south pole of another bar
magnet. What happens to the magnets?
A. They twist away from each other.
B. They repel each other
C. They attract each other.
D. They neither attract nor repel each other.
Answer:
I think it could be C.
hope it helps!
At night, within how many feet of approaching a vehicle from the rear must you dim your high beam headlights
Answer: 500 ft
Explanation:
High beam headlights help one to see better at night as the range of vision is greatly expanded. They can however, blind drivers coming on the opposite lane.
It is therefore prudent to ensure that when using high beam headlights, you dim them when a car is coming towards you. The appropriate distance to do so is a minimum of 500 ft from the car.
Which of these materials is not magnetic?'
*
Cobalt
Iron
Copper
Stainless Steel
Answer:
stainless steel is the material which is non magnetic.
WILL MARK BRAINIEST!!!!!! (Fill in the blanks with the possible answers at the bottom)
1. A Shallow __ is a good indicator of tsunamis, but sends data very slowly and cannot detect earthquakes. *
2. A __ is caused by a sudden shift in the ocean crust which displaces the water. *
3. Tsunamis are common at __ plate boundaries, since large earthquakes release the built up pressure, resulting in a quick vertical movement of the plate. *
4. A tsunamis is possible, but unlikely at a __ plate boundary where two plates are moving sideways past each other. *
5. The Indonesian Earthquake of 2004 had a 9.1__, which was the third largest ever recorded in human history. *
ALL POSSIBLE ANSWERS!!!!
A. Earthquake,
B. Tsunami,
C. Magnitude,
D. Sensor,
E. Transform,
F. Convergent,
G. Divergent.
20 pts !!!!
Four identical pallets of bricks, each with a mass of 40 kg with a square cross-sectional area of 0.50 m2, are stacked on the floor. What is the change in height of the pallet at the bottom of the stack if the pallets are 5.0 m tall when not stacked?
a.
1.04 μm
b
0.78 μm
c
0.26 μm
d
0.16 μm
What is the kinetic energy of a go-kart with a mass of 25 kg and a velocity of 2 m/s?
Answer:
50 JExplanation:
The kinetic energy of an object can be found by using the formula
[tex]k = \frac{1}{2} m {v}^{2} \\ [/tex]
m is the mass
v is the velocity
From the question we have
[tex]k = \frac{1}{2} \times 25 \times {2}^{2} \\ = 12.5 \times 4[/tex]
We have the final answer as
50 JHope this helps you
What is the motion of the particles in this kind of wave?
O The particles will move up and down over large areas.
O The partices will move up and down over small areas.
O The particles will move side to side over small areas.
O The particles will move side to side over large areas.
Answer:
a is correct
The particles will move up and down over large areas.
Answer:
B. The particles will move up and down over small areas.
Explanation:
I just took the quiz and got 100% :)
12. A rolling ball has 18 J of kinetic energy and is rolling 3.0 m/s. Find its mass.
Answer:
4g
I hope it will be useful.
Explanation:
KE = (1/2)*m*v^2
do all objects have inertia
a) true
b) false
Answer:
The answer is A. Which is true
A truck is traveling at constant speed of t v =21 m/s is at x= (80, 100, 120, 140, 160) m in front of a police car moving with constant speed of p v =25 m/s. What is the time (in s) needs the police to catch the truck?
Answer:
t= (20, 25, ... 40) s
Explanation:
This is an exercise in kinematics specifically of uniform motion, the first thing we must do is set a reference system, we place our zero in the police car, we write the equations
police car
x₁ = v₁ t
truck
x₂ = x₀ + v₂ t
In this case, they indicate several initial positions of the truck and the speed of the two vehicles, at the meeting point the positions must be the same
x₁ = x₂
v₁ t = x₀ + v₂ t
t (v₁ - v₂) = x₀
t = [tex]\frac{x_{o} }{v_{1}- v_{2} }[/tex]
let's calculate for each initial position
x₀ = 80m
t = 80 / (25-21)
t = 80/4
t = 20 s
x₀ = 100 m
t = 100/4
t = 25 s
the last x₀ = 160 m
t = 160/4
t = 40 s
we can see that the time increases as the distance between the vehicles increases
help pls physics problem
Answer:
0.4329 seconds
Explanation:
We are given;
Distance; d = 0.635 m
Velocity; v = 3.22 m/s
Angle; θ = 62.9°
To find the time, we have to find the horizontal component of the velocity.
Thus, Vx = 3.22 × cos 62.9
Formula for time is;
t = d/Vx
t = 0.635/(3.22 × cos 62.9)
t = 0.4329 sec
Thus the time he will take to clear the hurdle is 0.4329 sec
Acceleration due to gravity on Planet X is 4.5 m/s2 and the weight of an astronaut is 351 N. What is the mass of the astronaut?
Answer:
312
Explanation:
a car drives at a velocity of 12 [m/s] for 9 [s]. what distance does the car drive?
Answer:
The car drives 108 m
Calculate the total energy transferred when 200 g of ice cubes at 0°C are changed to steam at 100°C.
Specific heat capacity of water = 4200 J/kg °C
Specific latent heat of fusion = 340 kJ/kg
Specific latent heat of vaporisation = 2260 kJ/kg
Answer:
[tex]604000\ \text{J}[/tex]
Explanation:
m = Mass of ice = 200 g
[tex]\Delta T[/tex] = Temperature change of water = [tex](100-0)^{\circ}\text{C}[/tex]
c = Specific heat capacity of water = 4200 J/kg °C
[tex]L_f[/tex] = Specific latent heat of fusion = 340 kJ/kg
[tex]L_v[/tex] = Specific latent heat of vaporisation = 2260 kJ/kg
Heat required to convert ice to water = [tex]mL_f[/tex]
Heat required to raise the temperature of water to boiling point = [tex]mc\Delta T[/tex]
Heat required to convert water to steam = [tex]mL_v[/tex]
Total heat required
[tex]q=mL_f+mc\Delta T+mL_v\\\Rightarrow q=m(L_f+c\Delta T+L_v)\\\Rightarrow q=0.2(340\times 10^3+4200(100-0)+2260\times 10^3)\\\Rightarrow q=604000\ \text{J}[/tex]
Heat required to convert the given amount of ice to steam at the required temperature is [tex]604000\ \text{J}[/tex].
write the chemical name and chemical formula for four hydrogens and two nitrogen
Answer:
2 moles of H2Nsuperscript(-) or NHsubscript2 , amide group!
I hope it will be useful.
Pedro has collected different kinds of rocks. He begins testing the rocks' hardness to see how they compare.
What is the best phrase to describe what Pedro is doing?
A.
asking a question
B.
conducting a scientific investigation
C.
reporting scientific results
D.
forming a prediction
Answer:
B is the answer to the question
why it is important to have regular supervision of the weights and measurements in the marked?
Explanation:The fundamental answer is that without regular supervision of, and definitions of, weights and measures, commerce and exchange would be impossible, and there would be no market whatsoever for anything.
Explanation:
#Shadow
Please help as soon as possible!! Please!
Uses of Photodiode.State the 8 uses of phototide...................
Answer:
Photodiodes are used in consumer electronics devices such as compact disc players, smoke detectors, medical devices and the receivers for infrared remote control devices used to control equipment from televisions to air conditioners. For many applications either photodiodes or photoconductors may be used.
What are the units of Mass and Weight in the English System? Explain.
Answer:
I tried...
Explanation:
Assuming the English system of mass and weight is the same as the Imperial system, the measurements are:
• 1 pound (lb) = 16 ounces (oz)
• 2,000 pounds (lbs) = 1 ton (T)
I think that's everything?
In the English system, mass is measured in pounds and weight is also measured in pounds. However, it is important to understand the difference between mass and weight.
Mass is a measure of the amount of matter in an object and is a scalar quantity. It does not change with location or gravitational force. In the English system, mass is typically measured using a scale or balance, which compares the object's mass to a standard mass. The pound (lb.) is the unit of mass in the English system.
Weight, on the other hand, is a measure of the force exerted on an object due to gravity and is a vector quantity. It depends on the object's mass and the gravitational force acting on it. In the English system, weight is typically measured using a spring scale or a balance that incorporates a spring. The pound (lb.) is also used as the unit of weight in the English system.
Weight = Mass x Acceleration due to gravity
Mass is measured in pounds (lb.) and weight is also measured in pounds (lb.).It is important to note that weight can vary depending on the gravitational force acting on an object.
Learn more about weight here:
https://brainly.com/question/28221042
#SPJ2
Objects with different masses have the same gravitational force acting
on them.
TRUE
FALSE
give reason: the liquid pressure varies with the depth.
can I get the answer fast??
Answer:
This is due to an increase in hydrostatic pressure, the force per unit area exerted by a liquid on an object. The deeper you go under the sea, the greater the pressure of the water pushing down on you.