Answer:
0.17 L
Explanation:
Simply Use M1V1 = M2V2
(0.15 M)xV1 = (0.125M)x(.20L)
V1 = (.125 x .20)/.15 =
.167L or .17 L
calculate the grams of ethane present in a sample containing 0.3393 moles if the molar mass of ethane is 30.067 g/mol.
There are 10.196 grams of ethane present in the sample. there are 10.201 grams of ethane in the sample.
To calculate the grams of ethane present in a sample containing 0.3393 moles, you can use the formula:
grams = moles x molar mass
Plugging in the given values, we get:
grams = 0.3393 moles x 30.067 g/mol
grams = 10.196 g
Therefore, there are 10.196 grams of ethane present in the sample.
To calculate the grams of ethane present in a sample containing 0.3393 moles, you need to multiply the moles by the molar mass of ethane (30.067 g/mol):
Grams of ethane = moles × molar mass
Grams of ethane = 0.3393 moles × 30.067 g/mol
Grams of ethane = 10.201 g
So, there are 10.201 grams of ethane in the sample.
Visit here to learn more about molar mass : https://brainly.com/question/12127540
#SPJ11
A backyard swimming pool holds 185 cubic yards (yd3) of water. If the density of water is 1. 00 g/cm3, what is the mass of the water in pounds (lbs)?
1. 0936 yd = 1 m; 1 lb= 453. 6 g
If the density of the water is 1.00 g/cm³, the mass of the water in the pounds is 311733.7 pounds.
The backyard swimming pool can holds the water = 185 yd³
The conversion of the yd³ in to the m³ :
185 yd³ = 185 × ( 0.9144)³ m³
185 yd³ = 141.44 m³
The conversion of the m³ in to the kg :
The 1 m³ = 1000 kg
Which means that :
141.4 m³ = 141.44 × 1000 kg
141.4 m³ = 141440 kg
The conversion of the kg in to the pounds :
1 kilogram = 2.204 pounds
141440 kg = 141440 kg × 2.204 pounds
141440 kg = 311733.7 pounds
The mass of the water in the pounds is 311733.7 pounds.
To learn more about density here
https://brainly.com/question/14944658
#SPJ4
alkenes typically undergo _____ type reactions with electrophiles, whereas arenes react with electrophiles in ______ type reactions.
Alkenes typically undergo addition type reactions with electrophiles, whereas arenes react with electrophiles in substitution type reactions.
In an addition reaction, an electrophile adds to the double bond of an alkene, breaking the double bond and forming a single bond to each carbon atom. This results in a new single bond to the electrophile. For example, the reaction of propene with hydrogen chloride (HCl) is an addition reaction:
CH3CH=CH2 + HCl → CH3CH(Cl)-CH3
In contrast, in a substitution reaction, an electrophile substitutes for a hydrogen atom on an aromatic ring. The electrophile replaces the hydrogen atom, forming a new bond to the ring and resulting in a new substituted aromatic compound. For example, the reaction of benzene with nitric acid (HNO3) is a substitution reaction:
C6H6 + HNO3 → C6H5NO2 + H2O
The substitution reaction occurs via an electrophilic aromatic substitution (EAS) mechanism, in which the electrophile attacks the aromatic ring and forms a resonance-stabilized intermediate before the final substitution product is formed.
Visit to know more about Electrophile:-
brainly.com/question/14803468
#SPJ11
the precipitate is not completely air-dried when its mass is determined. will the percent yield be too high or too low?
If the precipitate is not completely air-dried when its mass is determined, the percent yield will be too high. This is because there will still be some residual moisture present in the precipitate, which will add to its weight and thus increase the overall mass of the sample. To ensure accurate results, it is important to thoroughly air-dry the precipitate before measuring its mass and calculating the percent yield.
The percent yield is calculated as the actual yield of a reaction divided by the theoretical yield, multiplied by 100%. The actual yield is determined by measuring the mass of the product obtained in the reaction. However, if the product is not completely dry when its mass is measured, the measured mass will include some amount of water or solvent that is still present in the product.
Since the theoretical yield of a reaction is based on the stoichiometry of the reactants, it assumes that the product is completely dry and free of any impurities or solvent molecules. Therefore, if the measured mass of the product includes some amount of water or solvent, the calculated percent yield will be higher than the actual yield because the measured mass will be artificially inflated.
Learn more about impurities here:
https://brainly.com/question/14932983
#SPJ11
If the precipitate is not completely air-dried when its mass is determined, the percent yield will be too high.
What are the factors affecting percent yield?This is because the residual water in the precipitate will add to its mass and therefore increase the overall yield. To obtain an accurate percent yield, it is important to ensure that the precipitate is completely dry before determining its mass. The extra moisture present in the precipitate will add to its mass, leading to a higher-than-expected value for the mass of the product, which in turn increases the calculated percent yield.
To know more about Yield:
https://brainly.com/question/28233909
#SPJ11
a 88.06 g sample of calcium hydroxide is dissolved in enough water to make 1.520 liters of solution. calculate the volume in ml of this solution that must be diluted with water in order to make 2.100 l of 0.250 m calcium hydroxide. what is the coefficient of your answer in scientific notation?
which of the following phase changes is exergonic? question 29 options: melting vaporization all phase changes are exergonic condensation
Only the condensation is an exergonic phase change.
Exergonic refers to a process that releases energy. Among the given options, the exergonic phase change is condensation. When a gas turns into a liquid during condensation,
it releases heat energy. This is because the molecules lose kinetic energy and move closer together, forming stronger attractive forces. The energy that was previously used to keep the gas molecules apart is released as heat energy.
On the other hand, melting and vaporization are endergonic phase changes, which require an input of energy to occur. Melting requires heat energy to break the intermolecular bonds between the solid molecules,
while vaporization requires even more energy to overcome the stronger intermolecular forces in the liquid and form a gas.
To learn more about : exergonic
https://brainly.com/question/31197285
#SPJ11
which of the following donates electrons to free radicals in order to neutralize them? group of answer choices superoxide dismutase catalase glutathione peroxidase vitamin e
The correct answer is option D. Vitamin E is an antioxidant that helps to neutralize free radicals by donating electrons.
By reacting with reactive oxygen species, it breaks the chain of oxidative reactions by generating a stable end product.
It aids in preventing oxidative cell damage, which can result in illnesses like cancer. It has been demonstrated that vitamin E lowers the risk of heart disease and aids in the reduction of inflammation.
It has also been connected to better brain health because it has been demonstrated to fend off age-related cognitive decline.
Numerous foods, such as nuts, seeds, and vegetable oils, as well as supplements, contain vitamin E.
Complete Question:
Which of the following helps to neutralize free radicals by donating electrons?
Group of answer choices
A. Superoxide Dismutase
B. Catalase
C. Glutathione Peroxidase
D. Vitamin E
To learn more about electrons visit:
https://brainly.com/question/26084288
#SPJ4
Question 5
Which of the following plants is known for its ability to absorb nitrates in polluted
water?
O cat tails
Oferns
O water lilies
O kelp
The sweet fiber in cat tail roots provides an abundance of starchy carbohydrates. The common cattail is not a perfect flower. Among the given options, cat tails absorb nitrates from polluted water. The correct option is A.
The cattail flower spikes can be possible to boil and can be eaten just like the corn on the cob. Pollen from the matured flowers can be collected and can be used with other flour to make biscuits, muffins and pancakes.
Cattails have an amazing ability to absorb phosphorous, nitrogen and other elements which can destruct the water bodies and sediment beds. They play a vital function in treating wastewater.
Thus the correct option is A.
To know more about Cattails, visit;
https://brainly.com/question/30561903
#SPJ1
A solution is made by adding 73 g of sodium nitrate to 135 g of water. What is the mass percentage of sodium nitrate in this solution? Select the correct answer below: a. 35.1% b. 67.3% c. 73.6% d. 82.4%
The mass percentage of sodium nitrate in a solution consisting of 73 g of sodium nitrate and 135 g of water is 35.1% and therefore we can say option (a) is correct.
The mass percentage is a concentration term used to describe concentration in solution. It is defined as the percentage of the mass of the solute per mass of the solution.
It can be written as the mass of solute/ mass of solution * 100
According to the question,
mass of the solute = 73 g
mass of the solvent = 135 g
mass of the solution = mass of solute + mass of solvent
= 73 + 105
= 208 g
mass percentage = [tex]\frac{73}{208} *100[/tex]
= 0.351 * 100
= 35.1 %
Learn more about Mass percentage:
https://brainly.com/question/15182450
#SPJ4
The correct answer is c. 73.6%. The mass percentage of sodium nitrate in the solution is 73.6%.
To find the mass percentage of sodium nitrate in the solution, we need to first calculate the total mass of the solution.
Total mass of solution = mass of sodium nitrate + mass of water
Total mass of solution = 73 g + 135 g
Total mass of solution = 208 g
Next, we need to calculate the mass of sodium nitrate as a percentage of the total mass of the solution.
Mass percentage of sodium nitrate = (mass of sodium nitrate / total mass of solution) x 100%
Mass percentage of sodium nitrate = (73 g / 208 g) x 100%
Mass percentage of sodium nitrate = 35.1%
Therefore, the mass percentage of sodium nitrate in the solution is 73.6%.
Learn more about sodium nitrate here: brainly.com/question/13645492
#SPJ11
Solid sodium chloride decomposes into chlorine gas and solid sodium .
what is the balanced chemical equation of this please help im stuck thanks
2NaCl --> 2Na + Cl2 but I have never seen something this reaction happening
What is the function of a buffer?
the definition of spatulation is: select one: a. creation of a paste, while wet b. none of the answers are correct c. the mixing of solid materials by continuously heaping them together with a spatula until a homogenous mixture is reached d. reducing particle size by the use of a mortar and pestle
The mixing of solid materials by continuously heaping them together with a spatula until a homogeneous mixture is reached.
Spatulation is a manual mixing technique commonly used in pharmacy and chemistry to mix solid ingredients. It involves using a spatula to heap the solid ingredients on a flat surface and repeatedly mixing and flattening them until a uniform mixture is achieved. The process is done by using the flat end of the spatula to push the powders together into a pile, then flattening the pile and repeating the process.
Spatulation is useful for preparing small batches of powders or creams and is often used in compounding medications or preparing laboratory samples. The other options in the question are not correct definitions of spatulation.
To learn more about Spatulation, here
https://brainly.com/question/30895599
#SPJ4
a buffer is prepared by adding 1.00 l of 1.0 m hcl to 750 ml of 1.5 m nahcoo. what is the ph of this buffer? [ka (hcooh)
Answer:The pH of a buffer prepared by adding 1.00 L of 1.0 M HCl to 750 ml of 1.5 M NaHCOO is 2.84
What is pH?
pH is a measure of the acidity of a solution.
pH is calculated from the negative logarithm to base ten of the hydrogen ions concentration of the solution.
For weak acids such as those used in the preparation of buffers, the acid dissociation constant, Ka are used to determine the pH of the solution.
Therefore, from the Ka of acetic acid, the pH of a buffer prepared by adding 1.00 L of 1.0 M HCl to 750 ml of 1.5 M NaHCOO is 2.84
How many joules are evolved if 43. 5 g of aluminum is cooled by 13°C? Specific heat = 0. 895 J/g° C
You need to use the heat formula which is
Q = m × c_{s} × ∆T
In this case Q = 43,5 g × 0,895 J/g °C × 13 °C = 506 J
What most likely would happen if easily accessible gold reserves were reduced?
The fact is, the cheap fruit has probably already been picked when it comes to finding new mineral wealth.
When will and our own gold reserves run out?According to a group of specialists, the present high production rate will cause some finite metals, including gold, to run out limited are our gold holdings Scientists have determined when the rare metal will vanish, and it will happen in just 27 years, in 2050.
What effects does ocean gold mining have on the climate?Deep ocean mines, essentially level the planet's surface to collect resources, cause numerous environmental issues. The loss of natural land has the most immediate effects at mining sites.
To know more about metals visit :
https://brainly.com/question/29404080
#SPJ1
How many atoms are contained in 10 grams of NaCl?
First you must calculate the number of moles of NaCl
MM NaCl = 35 + 23 = 58
NaCl moles = 10g /58 g/mol = 0,17 mol
By definition, 1 mole contains 6,02 × 10²³ atoms, therefore you simply need to multiply the Avogadro's number by the number of moles
6,02 × 10²³ × 0,17 mol = 1,02 × 10²³
how to find the atomic number and atomic mass of the first 20 elements
Predict what will happen if the ball rolls straight into an object with a greater mass than a bowling pin
If a ball rolls straight into an object with a greater mass than a bowling pin, the ball will experience a force upon impact.
If the object is stationary, the ball will transfer its momentum to the object upon impact. The object will then move in the direction of the ball's momentum, and the ball will come to a stop. This is an example of an inelastic collision.
If the object is moving in the same direction as the ball, the collision will result in a transfer of momentum between the two objects. The ball will slow down, while the object will speed up. The final velocities of the ball and object will depend on their respective masses and velocities before the collision.
Therefore, the result of the collision will depend on the specific circumstances of the collision and the properties of the objects involved.
To know more about inelastic collision here
https://brainly.com/question/14521843
#SPJ4
Sam records the mass of his evaporating dish as 6. 251 g.
He records the mass of the evaporating dish and the sample of hydrate as 16. 864 g.
After heating the sample in the evaporating dish to constant weight, the mass of them combined is 11. 13 g.
How many moles of water were removed from the sample by the heating process?
Report your answer with three digits after the decimal
The moles of water that were removed from the sample by the heating process is 0.436 mol.
The Mass of evaporating dish = 6.251 g
The mass of dish + hydrate = 16.864 g
The mass of hydrate = (mass of the dish + hydrate) - mass of the dish
The hydrate = 16.864 - 6.251 = 10.613 g
The Mass of dehydrated substance = (mass of the dish + dehydrate ) - mass of the dish
The dehydrated material = 11.13 - 8.365 = 2.765 g
The Mass of water evaporated = hydrate - dehydrate
The mass of the water = 10.613 - 2.765 = 7.848 g
The Molar mass of the water = 18 g/mol
The number of moles of the water evaporated = mass / molar mass
The moles = 7.848 / 18 = 0.436 moles
To learn more about hydrate here
https://brainly.com/question/13614424
#SPJ4
calculate the adiabatic flame temperature of propane (c3h8) burned in stoichiometric air at 25c, 1atm, to within 25 degrees c error.
When a combustion reaction takes vicinity energy is released to the combustion products. If no warmness is lost in this process, the temperature of the combustion merchandise is acknowledged as the "Adiabatic Flame Temperature." For methane combustion in air at 1 environment the Adiabatic Flame Temperature is. 2,328 K or 2055 C.
What is the method of best fuel equation for adiabatic process?For an ideal gasoline undergoing an adiabatic process, the equation of kingdom is given as PT−5/2=k, the place ok is a constant.
In a consistent extent system the adiabatic flame temperature can be discovered via equating the internal strength of the merchandise and reactants. Constant stress Process: In a constant strain process the enthaply of the reactants and products are equated.
Learn more about adiabatic process here:
https://brainly.com/question/3962272#SPJ1As you watch the demonstration shown in the videos, answer the questions in the introduction and parts 1 – 3 of this worksheet.
Introduction (4 points)
1. What are two human activities you think can pollute a watershed? (2 points)
2. What are three pollutants humans can add to water? (2 points)
Part 1: Testing Turbidity (5 points)
3. What is the turbidity of sample 1? Of sample 2? (1 point)
4. Is the difference in the turbidity of the two samples what you would expect, based on how cloudy they look? (2 points)
5. What might the turbidity of each sample indicate about the water quality? (2 points)
Part 2: Testing Nitrate and Phosphate Levels (10 points)
6. A water sample has 4 ppm of nitrate. How many milligrams of nitrate per liter of water is 4 ppm? How much more is that than a sample with 2 ppm of nitrate? (2 points)
7. How did sample 1 and sample 2 change color during the test for phosphate? What does each color change indicate about the level of phosphate in each sample? (2 points)
8. How did sample 1 and sample 2 change color during the test for nitrate? What does each color change indicate about the level of nitrate in each sample? (2 points)
9. How do the nitrate and phosphate levels in sample 1 compare with those in sample 2? (2 points)
10. What do the nitrate and phosphate levels indicate about the water quality of each sample? (2 points)
Part 3: Measuring pH (6 points)
11. Which juice is more acidic: lemon juice or tomato juice? (1 point)
12. What were the pH values of sample 1 and sample 2 when taken with the pH meter? (1 point)
13. What does the pH of each water sample indicate about its water quality? (2 points)
14. How do you use a pH meter to measure the pH of a water sample? (2 points)
Hands-On Activity: Modeling Human Impacts on Freshwater (25 points)
In this part of the lab, you will use a simulation to explore some of the ways humans affect the quality and supply of freshwater. Then you will use the simulation to design a way to reduce the impact of humans on freshwater.
Part 1: Modeling Water Pollution Sources (5 points)
1. In the Resource drop-down menu, select "Coal."
2. Under Settings, make sure the population growth is set to "Average."
3. Select the Pollution Detector.
4. Select the play button to run the simulation.
5. Open each pollution alert. Find the ones where the location of the pollution is surface water or groundwater. According to the model, how can using coal as a fuel affect surface water and groundwater? (3 points)
6. In the Resource drop-down menu, select "Agricultural land." Then repeat Steps
2 – 4.
7. Open each pollution alert. Find the ones where the location of the pollution is surface water. According to the model, how can agricultural land use affect surface water? (2 points)
Part 2: Modeling the Effects of Population Growth (5 points)
8. In the Resource drop-down menu, select "Freshwater."
9. Under Settings, set both the population growth and the consumption rate to "Average."
10. Select the play button to run the simulation. Observe the changes in the model.
11. Go to the Graphs tab. Select "Freshwater Consumption" from the drop-down menu above the graph on the left. Select "Human Population" from the drop-down menu above the graph on the right.
12. Look at the Freshwater Consumption graph. One line on this graph shows the total supply of freshwater in the watershed. The other line on the graph shows the water debt. The water debt is how much of the watershed's freshwater is being used by the human population. About how many years pass before the water debt line crosses the total supply line? Now find this year on the x-axis in the Human Population graph. What is the number of people in the population during this year? Record your data in the Freshwater Consumption and Population Growth Data Table below.
13. Repeat Steps 8 – 12, setting the population growth to "Low" and then to "High."
Freshwater Consumption and Population Growth Data Table (3 points)
Population growth Years to use total supply Number of people (in millions)
Average
Low
High
14. What changes do you observe taking place in all three simulations? How do these changes differ depending on the population growth rate? (2 points)
Part 3: Modeling the Effects of Consumption (5 points)
15. In the Resource drop-down menu, select "Freshwater."
16. Under Settings, set both the population growth and the consumption rate to "Average."
17. Select the play button to run the simulation. Observe the changes in the model.
Point source pollution, like industrial waste flowing directly into a river from a factory drain, is one example. Plastic grocery bags and parking areas were contaminated by pollutants including motor oil leaks.
What effects do humans have on watersheds?Two instances of how humans directly affect the water in watersheds are the construction of dams and the rerouting of rivers. Mankind have used water as just a resource, obtaining our drinking water from watersheds. As water use may be controlled to be sustainable, this need not have a bad effect.
What are two actions taken by people that harm the environment?The effects of modern livestock farming, development, deforestation, and Dioxide emissions, among several other things, are accelerating the biodiversity decline because to desertification, ocean and river pollution, and global warming.
To know more about Dioxide visit :
https://brainly.com/question/15153008
#SPJ1
1. Create a diagram of your electroplating apparatus (an electrolytic cell). Then submit your drawing with the following terms labeled correctly. Or, beginning with the positive terminal of the battery and ending with the negative terminal of the battery, describe the path that the electricity takes and where each of the following occurs:
anode
cathode
copper strip
battery
positive terminal
negative terminal
place where oxidation occurs
place where reduction occurs
electrolyte solution
coin (or nail)
direction of electron flow
2. Write the two half-reactions that occur in this electroplating process. Be sure to include the states of the elements or ions.
The two half-reactions that occur in this electroplating process are oxidation and reduction. the diagram is attached
What is oxidation?Oxidation is a chemical reaction in which an atom or molecule either loses or gains electrons. This process results in the oxidation of the atom or molecule, leading to a chemical change in the molecule. Oxidation occurs when electrons are removed from the molecule, causing it to become more positively charged. This can lead to the formation of new molecules, such as oxygen (O₂) and carbon dioxide (CO₂).
Oxidation occurs at the anode, where electrons are released from the copper strip and it is oxidized to form copper ions (Cu²⁺). The copper ions are then dissolved into the electrolyte solution. Reduction occurs at the cathode, where the copper ions in the electrolyte solution are reduced using electrons from the battery and deposited onto the coin (or nail). The direction of electron flow is from the positive terminal of the battery, to the anode, to the electrolyte solution, to the cathode, and finally to the negative terminal of the battery.
To learn more about oxidation
https://brainly.com/question/13182308
#SPJ1
Electrochemistry-Related Question:
The answer is "A"
but I don't understand this question, I need explanation
The only incorrect statement in the diagram is (d) Cr202-7 can be used in aqueous H2SO4.
A detailed explanation of the Standard Electrode PotentialOption (d) is incorrect because the half-cell reaction involving Cr2O7^2- and H+ (aq) produces H2CrO4, which can decompose in acidic solutions, leading to inaccurate results. Therefore, Cr2O7^2- should not be used in aqueous H2SO4 for the quantitative estimation of Fe(NO3)2-.
Learn more about Electrode Potential here:
https://brainly.com/question/17362810
#SPJ1
The Only incorrect statement is option C
What is electrochemistry?Electrochemistry is a branch of chemistry that deals with the study of the relationship between electrical energy and chemical reactions.
It involves the study of the behavior of electrons and ions in chemical reactions that occur in a solution or at the interface between two different phases, such as a solid electrode and a liquid electrolyte.
We can see that it is better to use HCl instead of the use of the H2SO4 acid as we have in the options.
Learn more about electrochemistry:https://brainly.com/question/16912983
#SPJ1
During chemistry class, Carl performed several lab test on two white solids. The results of three tests are seen in the data table. Based on this data, Carl has concluded that substance B must have ______ bonds.
Carl has concluded that substance have ionic bonds.
How can you tell whether or not a covalent bond is polar?The usual guideline is that a bond is considered nonpolar if the difference in electronegativities is less than or equal to 0.4, while there are no hard and fast rules, and polar if the difference is greater.
What sort of covalent bond has a non-polar example?The bond between two hydrogen atoms is an illustration of a nonpolar covalent bond since they equally share electrons. The bond between two chlorine atoms is another illustration of a nonpolar covalent bond since they also equally share electrons.
To know more about ionic bonds visit:-
https://brainly.com/question/11527546
#SPJ1
Question:
During che distry class, Cort performed several lab tests on two white solids. The results of three tests are seen in the data table. Based on this data, Carl has concluded that substance have ________ bonds.
A) covalent
B) diatomic
C) ionic
D) metallic
How would the reading on a barometer change if you were to take one on a trip from los angeles to Lake Tahoe, which is at a much higher altitude?
The reading on a barometer would change if you were to take one on a trip from Los Angeles to Lake Tahoe, which is at a much higher altitude.
1. A barometer measures atmospheric pressure.
2. Atmospheric pressure decreases with an increase in altitude.
3. Los Angeles is at a lower altitude (approximately 305 feet or 93 meters above sea level) compared to Lake Tahoe (about 6,225 feet or 1,897 meters above sea level).
4. As you travel from Los Angeles to Lake Tahoe, the altitude increases.
5. Due to the increase in altitude, the atmospheric pressure decreases.
6. The barometer reading in Lake Tahoe will be lower than the reading in Los Angeles.
In conclusion, the barometer reading would be lower in Lake Tahoe compared to Los Angeles due to the higher altitude and the resulting decrease in atmospheric pressure.
To know more about readings on a barometer :
https://brainly.com/question/2275528
#SPJ11
If you were to take a barometer on a trip from Los Angeles to Lake Tahoe, which is at a much higher altitude, the reading on the barometer would decrease as you ascend to higher altitudes.
A barometer is a device used to measure atmospheric pressure. The pressure at sea level is approximately 1013 hPa (hectopascals) or 29.92 inches of mercury (inHg). As you increase in altitude, the pressure decreases due to the decreased weight of the atmosphere above. For every 1000 feet increase in altitude, there is an approximate decrease of 1 inch of mercury (inHg) or 33 hPa in pressure.
Lake Tahoe has an elevation of approximately 6,225 feet, which is significantly higher than Los Angeles, which is only 233 feet above sea level. As a result, the atmospheric pressure at Lake Tahoe would be lower than the pressure in Los Angeles. Therefore, if you were to take a barometer from Los Angeles to Lake Tahoe, the reading on the barometer would decrease as you ascend to higher altitudes.
In summary, the reading on a barometer would decrease as you ascend to higher altitudes such as Lake Tahoe from Los Angeles.
Learn more about barometer here:
https://brainly.com/question/2856885
#SPJ11
what is the most important use of an element's atomic number? what else can we know from a neutral atom's atomic number
The most important use of an element's atomic number is that it determines the identity of an element. From a neutral atom's atomic number, we can also determine the number of electrons in that atom.
The most important use of an element's atomic number is that it determines the element's unique identity and its position on the periodic table. The atomic number is equal to the number of protons in the nucleus of an atom, which also determines the number of electrons in a neutral atom.
From a neutral atom's atomic number, we can also determine the element's symbol, its electron configuration, and its properties such as its atomic mass and the number of isotopes it has. Additionally, the atomic number can provide information about the element's reactivity and its ability to bond with other elements to form compounds. Overall, the atomic number is a fundamental characteristic of an element that is used in many different areas of chemistry and physics.
Learn more about a neutral atom's atomic number at https://brainly.com/question/7027481
#SPJ11
The most important use of an element's atomic number is that it determines the element's unique identity and properties.
The atomic number also tells us the number of protons in the nucleus of an atom, which in turn determines the number of electrons in the neutral atom. Additionally, the atomic number can give us information about the element's electron configuration and its position on the periodic table. Overall, the atomic number is a crucial piece of information for understanding an element's properties and behavior.
Hi! The most important use of an element's atomic number is to identify the specific element and its position in the periodic table. The atomic number represents the number of protons in the nucleus of an atom of that element.
From a neutral atom's atomic number, we can also determine the number of electrons, as a neutral atom has an equal number of protons and electrons. This information helps us understand the element's chemical properties and reactivity, as the arrangement of electrons in the atom's electron shells influences its behavior in chemical reactions.
Learn more about atomic number here:
https://brainly.com/question/16858932
#SPJ11
how many moles of aluminum nitrate are obtained from the reaction of 0.75 mol of silver nitrate with a sufficient amount of aluminum?
The balanced chemical equation for the reaction between aluminum and silver nitrate is:
2 Al + 3 AgNO3 → 3 Ag + 2 Al(NO3)3
From the equation, we can see that 3 moles of aluminum nitrate (Al(NO3)3) are produced for every 3 moles of silver nitrate (AgNO3) consumed.
Therefore, if 0.75 moles of silver nitrate react, we can calculate the number of moles of aluminum nitrate produced as follows:
0.75 mol AgNO3 x (2 mol Al(NO3)3 / 3 mol AgNO3) = 0.50 mol Al(NO3)3
So, 0.50 moles of aluminum nitrate (Al(NO3)3) are obtained from the reaction of 0.75 mol of silver nitrate with a sufficient amount of aluminum.
Learn more about balanced chemical equation here:
https://brainly.com/question/28294176
#SPJ11
Read the given chemical reaction.
C2H6 + O2 → CO2 + H2O
How many moles of O2 are required to react completely with 3. 2 moles of C2H6?
3. 5 moles of O2
6. 5 moles of O2
10. 4 moles of O2
11. 2 moles of O2
11.2 moles of [tex]\rm O_2[/tex] are required to react completely with 3.2 moles of [tex]\rm C_2H_6[/tex]. Therefore option D is correct.
The balanced chemical equation for the complete combustion of [tex]\rm C_2H_6[/tex] (ethane) with oxygen (O2) is: 2 [tex]\rm C_2H_6 + 7 O_2\ - > 4 CO_2 + 6 H_2O[/tex]
From the balanced equation, we can see that 2 moles of [tex]\rm C_2H_6[/tex] react with 7 moles of [tex]\rm O_2[/tex]. To find out how many moles of [tex]\rm O_2[/tex] are required to react completely with 3.2 moles of [tex]\rm C_2H_6[/tex], we can set up a proportion:
(7 moles [tex]\rm O_2[/tex] / 2 moles [tex]\rm C_2H_6[/tex]) = (x moles [tex]\rm O_2[/tex] / 3.2 moles [tex]\rm C_2H_6[/tex])
Solving for x:
x = (7 moles [tex]\rm O_2[/tex] / 2 moles [tex]\rm C_2H_6[/tex]) * 3.2 moles [tex]\rm C_2H_6[/tex]
x = 11.2 moles [tex]\rm O_2[/tex]
So, 11.2 moles of [tex]\rm O_2[/tex] are required to react completely with 3.2 moles of [tex]\rm C_2H_6[/tex]. Therefore, the correct answer is 11.2 moles of [tex]\rm O_2[/tex].
Therefore option D is correct.
Know more about stoichiometry:
https://brainly.com/question/28780091
#SPJ12
ما
1. Blood plasma contains a total carbonate pool of 0. 0252M.
(a) What is the HCO3"/CO2 ratio
(b) What is the concentration of each buffer component present at pH=7. 4
(c) What would the pH be if 0. 01M H" is added assuming that the excess CO2 is not
released.
(d) What would the pH be if 0. 01M H is added assuming that the excess CO2 is released.
(a) The HCO₃⁻ / CO₂ ratio is 20 : 1.
(b) The concentration of each buffer present at the pH=7. 4 is [CO₂] = 1.20 × 10⁻³ M, [HCO₃⁻] = 0.0240 M.
(c) The pH be if 0. 01M H⁺ is added ,the excess CO2 is not released is 6.20.
(d) The pH be if 0. 01M H⁺ is added , the excess CO2 is released. is 7.17.
(a) pH = pka + log HCO₃ / CO₂
HCO₃⁻ / CO₂ = 10^pH - pka
HCO₃⁻ / CO₂ = 10 ^7.4 - 6.1
HCO₃⁻ / CO₂ = 20 : 1
(b) Total concentration = 0.0252 M
HCO₃⁻ + CO₂ = 0.0252
20 CO₂ + CO₂ = 0.0252
[CO₂] = 1.20 × 10⁻³ M
[HCO₃⁻ ] = 0.0240 M
(c) pH = pka + log HCO₃ / CO₂
pH = 6.1 + log 0.0140 / 0.0112
pH = 6.20
(d) pH = pka + log HCO₃ / CO₂
pH = 6.1 + log 0.0140 / 1.20 × 10⁻³
pH = 7.17
To learn more about pH here
https://brainly.com/question/31059152
#SPJ4
what is the ionization constant ka for a wak monprotic acid with a 0.10 molar solution having ph of 3.0
The ionization constant (Ka) of a weak monoprotic acid is the measure of the acid's ability to dissociate into its ions in solution.
The Ka value can be calculated as Ka = 10^(pH - pKa). Therefore, for a 0.10 M solution of a weak monoprotic acid with a pH of 3.0, the Ka value is 10^(-3).
It is a measure of the equilibrium between the acid and its ions in water. The Ka value is defined as the ratio of the concentrations of the ions and the acid in solution.
For a 0.10 M solution of a weak monoprotic acid with a pH of 3.0, the Ka value can be calculated using the Henderson-Hasselbalch equation. This equation states that pH = pKa + log ([A-]/[HA]), where [A-] is the concentration of the ions and [HA] is the concentration of the acid.
Thus, the Ka value can be calculated as Ka = 10^(pH - pKa). Therefore, for a 0.10 M solution of a weak monoprotic acid with a pH of 3.0, the Ka value is 10^(-3).
Know more about Weak monoprotic here
https://brainly.com/question/2515115#
#SPJ11