The concentration of the dilute solution is 2.88e⁻⁵ M.
First, we can calculate the amount of the stock solution used to prepare the dilute solution:
amount of stock solution = concentration x volume = (320e-6 M) x (0.90 mL) = 2.88e⁻⁷ molNext, we can calculate the concentration of the dilute solution:
concentration of dilute solution = amount of stock solution / volume of dilute solution = (2.88e⁻⁷ mol) / (10.00 mL = 1.00e⁻² L) = 2.88e⁻⁵ MTherefore, the concentration of the dilute solution is 2.88e⁻⁵ M, as stated in the one-line answer.
To learn more about concentration of the dilute solution, here
https://brainly.com/question/15467084
#SPJ4
what is the concentration of an alcl3 solution if 150. ml of the solution contains 650. mg of cl- ion?
The concentration of the [tex]AlCl_{3}[/tex] solution is approximately 0.0408 moles per liter.
How to find the molarity of a solution?To determine the concentration of an [tex]AlCl_{3}[/tex] solution, we need to first calculate the amount of Cl- ions in moles using the given information, and then divide it by the volume of the solution in liters.
1. Convert the mass of Cl- ions (650 mg) to grams: 650 mg ÷ 1000 = 0.65 g.
2. Determine the moles of Cl- ions: Since there are 3 moles of Cl- in 1 mole of [tex]AlCl_{3}[/tex], you need to find the moles of AlCl3 first. The molar mass of Cl is approximately 35.45 g/mol, so the molar mass of AlCl3 is (1 × 26.98) + (3 × 35.45) = 133.33 g/mol.
3. Calculate the moles of [tex]AlCl_{3}[/tex] : 0.65 g Cl- ÷ (3 × 35.45 g/mol) = 0.00613 mol [tex]AlCl_{3}[/tex].
4. Convert the volume of the solution to liters: 150 mL ÷ 1000 = 0.15 L.
5. Determine the concentration (molarity) of the [tex]AlCl_{3}[/tex solution: 0.00613 mol [tex]AlCl_{3}[/tex] ÷ 0.15 L = 0.0409 mol/L.
To know more about the Concentration of solution:
https://brainly.com/question/16073358
#SPJ11
2 NO(g)+Cl2(g)⇌2 NOCl(g) Kc=2000
A mixture of NO(g) and Cl
2
(g) is placed in a previously evacuated container and allowed to reach equilibrium according to the chemical equation shown above When the system reaches equilibrium, the reactants and products have the concentrations listed in the following table:
Species Concentration (M)
NO(g) 0.050
C12(g) 0.050
NOCl(g) 0.50
Which of the following is true if the volume of the container is decreased by one-half?
A. Q = 100, and the reaction will proceed toward reactants.
B. Q = 100, and the reaction will proceed toward products.
C. Q = 1000, and the reaction will proceed toward reactants.
D. Q = 1000, and the reaction will proceed toward products.
Neither A, B, C nor D. The equilibrium position will not be affected by the change in volume.
To determine how the equilibrium of the reaction 2 NO(g) + Cl₂(g) ⇌ 2 NOCl(g) will shift if the volume of the container is decreased by one-half, we first need to calculate the reaction quotient Q.
The balanced chemical equation for the reaction is:
2 NO(g) + Cl₂(g) ⇌ 2 NOCl(g)
At equilibrium, the concentrations of the species are:
[NO] = 0.050 M
[Cl2] = 0.050 M
[NOCl] = 0.50 M
Using these values, we can calculate the value of the reaction quotient Q:
Q [tex]= [NOCl]^2 / ([NO]^2[Cl2])[/tex]= [tex](0.50)^2 / ((0.050)^2 x 0.050)[/tex] = 1000
Now we compare the value of Q to the equilibrium constant Kc:
Kc =[tex][NOCl]^2 / ([NO]^2[Cl2])[/tex] = 2000
Since Q < Kc, we can conclude that the reaction has not yet reached equilibrium and that the forward reaction will proceed to reach equilibrium.
When the volume of the container is decreased by one-half, the concentration of all species will increase due to the decrease in volume. According to Le Chatelier's principle, the reaction will shift in the direction that reduces the total number of moles of gas.
In this case, the reaction produces two moles of gas on the left-hand side and two moles of gas on the right-hand side, so the total number of moles of gas does not change. Therefore, the volume change will not have an effect on the equilibrium position.
Learn more about equilibrium here:
https://brainly.com/question/30807709
v
#SPJ11
The correct answer is: C. Q = 1000, and the reaction will proceed toward reactants.
How to determine the reactions at equilibrium?
To determine which statement is true if the volume of the container is decreased by one-half, we need to calculate the reaction quotient (Q) for the new conditions.
When the volume is decreased by half, the concentrations of all species will double:
NO(g): 0.050 * 2 = 0.100 M
Cl2(g): 0.050 * 2 = 0.100 M
NOCl(g): 0.50 * 2 = 1.00 M
Now, calculate Q using the new concentrations:
Q = [NOCl]^2 / ([NO]^2 * [Cl2])
Q = (1.00)^2 / ((0.100)^2 * (0.100))
Q = 1 / 0.001
Q = 1000
So, Q = 1000. Now, compare Q to Kc:
Q > Kc, meaning the reaction will proceed toward the reactants to reach equilibrium.
To know more about Reaction Quotient:
https://brainly.com/question/24202150
#SPJ11
If 1 g of acetanilide (molecular mass is 135. 17 g/mol) is used, how much (in mol) of nitronium ion do you need?
0.0074 mol of nitronium ion is needed to react with 1 g of acetanilide
To determine the amount of nitronium ion needed for the reaction with 1 g of acetanilide, we will first calculate the moles of acetanilide and then apply stoichiometry.
Given that the molecular mass of acetanilide is 135.17 g/mol, we can calculate the moles of acetanilide:
moles = mass / molecular mass
moles = 1 g / 135.17 g/mol ≈ 0.0074 mol
Now, we need to determine the stoichiometry of the reaction between acetanilide and nitronium ion. Assuming the reaction is a 1:1 ratio (i.e., one mole of acetanilide reacts with one mole of nitronium ion), the amount of nitronium ion needed would be the same as the moles of acetanilide.
Thus, approximately 0.0074 mol of nitronium ion is needed to react with 1 g of acetanilide. Remember to consider the reaction's stoichiometry when applying this calculation to other scenarios or chemical reactions.
Know more about stoichiometry here:
https://brainly.com/question/14420683
#SPJ11
4. describe the relationship between the metal and water in terms of which is exothermic and which is endothermic.
Consider the molecular orbital model of benzene. In the ground state, how many molecular orbital's are filled with electrons? Select one:
A. 1
B. 2
C. 3
D. 4
E. 5
F. 6
G. 7
H. 8
Consider the molecular orbital model of benzene. In the ground state, how many molecular orbitals are filled with electrons is C. 3
In the molecular orbital model of benzene, the ground state refers to the lowest energy state of the molecule. Benzene has 12 electrons, with six of these electrons forming a delocalized π-system that contributes to its aromatic properties.
To determine the number of molecular orbitals filled with electrons, we can look at the molecular orbitals formed by the π-system. In benzene, there are six π molecular orbitals created by the overlapping of the p-orbitals from each of the six carbon atoms. These π molecular orbitals can be classified into three bonding (lower energy) and three antibonding (higher energy) orbitals.
In the ground state, the electrons fill the molecular orbitals from the lowest energy level to the highest. The six π electrons in benzene fill the three lower energy-bonding molecular orbitals, with each orbital containing two electrons. Therefore, there are 3 molecular orbitals filled with electrons in the ground state of benzene. Therefore the correct option is C.
Know more about molecular orbitals here:
https://brainly.com/question/17371976
#SPJ11
PLEASE ANSWER ASAP1. How many atoms are present in 8.500 mole of chlorine atoms?
2. Determine the mass (g) of 15.50 mole of oxygen.
3. Determine the number of moles of helium in 1.953 x 108 g of helium.
4. Calculate the number of atoms in 147.82 g of sulfur.
5. Determine the molar mass of Co.
6. Determine the formula mass of Ca3(PO4)2.
IT WOULD BE HELPFUL
SHOW WORK
1. 8.5 mole of chlorine contains 8.5 x 6.023 x 10²³= 5.11x 10²⁴ atoms of chlorine. 2. 15.50 mole of oxygen has a mass of 15.50 x 16.00 g = 248.00 g. 5. The molar mass of cobalt is 58.93 g/mol. 6. The formula mass of Ca₃(PO₄)₂ is 310.18 g/mol.
What is molar mass?Molar mass is the mass of one mole of a substance. It is a physical property and not a chemical property, and is measured in grams per mole (g/mol). The molar mass of a substance can be determined by adding together the atomic masses of each element present in the molecule. For example, one mole of carbon dioxide would have a molar mass of 44 g/mol, as it contains one 12 g/mol carbon atom and two 16 g/mol oxygen atoms.
What is formula mass?Formula mass is the sum total of all the masses of the elements in a chemical formula. The formula mass of a compound is usually expressed in grams per mole (g/mol). It is calculated by add the atomic masses of all the atoms present in the formula, taking into account how many of each atom are present.
1. 8.5 mole of chlorine contains 8.5 x 6.023 x 10²³ = 5.11x 10²⁴ atoms of chlorine.
2. 15.50 mole of oxygen has a mass of 15.50 x 16.00 g = 248.00 g.
3. 1.953 x 108 g of helium contains 1.953 x 108 / 4.00 g/mol = 4.88x10⁷ moles of helium.
4. 147.82 g of sulfur contain 147.82 / 32.06 = 4.60x10²³ atoms of sulfur.
5. The molar mass of cobalt is 58.93 g/mol.
6. The formula mass of Ca₃(PO₄)₂ is 310.18 g/mol.
To know more about moles, visit:
https://brainly.com/question/26416088
#SPJ1
If in cup 1 you have a 40,000 ppm of a solution and you transfer one drop from cup 1 to cup 2 and add 9 drops of
water. You continue this process for the next two cups, how many ppm do you have in cup 4? (please help this is so confusing.)
The dilution ration is 1÷10 (1 drop of concentrated solution in 10 drops of diluted solution).
If we do that 4 times we repeat the same dilution with the same dilution ratio of 1÷10 (numerically is 0,1). Therefore we can multiply the solution ratio by itself 4 times.
0,1⁴ = 10^-4
This means that we end up with a solution which concentration is 10^-4 times the beginning concentration. Therefore the final concentration is
40 000 ppm × 10^-4 = 4ppm
PS: we can do this because we have the same unit of measurement for the volumes of both the concentrated solution and the diluted one (drops)
5. How many atoms does 2. 0 moles of He represent?
2.0 moles of He represents 1.2 x 10²⁴ atoms of He.
One mole of any element contains Avogadro's number of atoms, which is approximately 6.022 x 10²³. So, to calculate the number of atoms in 2.0 moles of He, we simply need to multiply Avogadro's number by the number of moles:
2.0 moles He x 6.022 x 10²³ atoms/mole = 1.2 x 10²⁴ atoms of HeThe number of atoms in a mole depends on the substance and is determined by Avogadro's number, which is approximately 6.022 x 10²³ atoms per mole.
To learn more about Avogadro's number, here
https://brainly.com/question/11907018
#SPJ4
phenacetin can be prepared from p-acetamidophenol, which has a molar mass of 151.16 g/mol, and bromoethane, which has a molar mass of 108.97 g/mol. the density of bromoethane is 1.47 g/ml. what is the yield in grams of phenacetin, which has a molar mass of 179.22 g/mol, possible when reacting 0.151 g of p-acetamidophenol with 0.12 ml of bromoethane?
The theoretical yield of phenacetin is 0.17922 g. However, the actual yield may be lower due to factors such as incomplete reaction, loss during purification, or experimental error.
To calculate the theoretical yield of phenacetin, we need to first determine the limiting reagent. The limiting reagent is the reactant that will be completely consumed in the reaction, thus limiting the amount of product that can be produced.
First, we need to convert the volume of bromoethane given in milliliters to grams, using its density:
0.12 ml x 1.47 g/ml = 0.1764 g bromoethane
Next, we can use the molar masses of p-acetamidophenol and bromoethane to determine the number of moles of each:
moles p-acetamidophenol = 0.151 g / 151.16 g/mol = 0.001 mol
moles bromoethane = 0.1764 g / 108.97 g/mol = 0.00162 mol
Since the reaction requires a 1:1 molar ratio of p-acetamidophenol to bromoethane, and the number of moles of p-acetamidophenol is smaller than the number of moles of bromoethane, p-acetamidophenol is the limiting reagent.
The theoretical yield of phenacetin can be calculated using the molar mass of phenacetin and the number of moles of p-acetamidophenol:
moles phenacetin = 0.001 mol p-acetamidophenol
mass phenacetin = 0.001 mol x 179.22 g/mol = 0.17922 g
For such more questions on Phenacetin:
https://brainly.com/question/29460577
#SPJ11
calculate the standard free-energy change, in kilojoules, at 25 °c for the reaction 3 pb (s) 2 fe3 (aq) → 3 pb2 (aq) 2 fe (s) e∘cell = 0.090 v
a. 52 kJ b. -52,000 kJ c. -52 kJ d. -26 kJ
The answer is (c) -52 kJ by using the formula the formula for calculating the standard free-energy change (ΔG°) is:
ΔG° = -nFE°
Where n is the number of moles of electrons transferred in the balanced chemical equation, F is the Faraday constant (96,485 C/mol e^-), and E° is the standard cell potential.
In this case, the balanced chemical equation is:
3 Pb(s) + 2 Fe3+(aq) → 3 Pb2+(aq) + 2 Fe(s)
The number of moles of electrons transferred is 6 (3 electrons for each of the two Fe3+ ions). So n = 6.
The standard cell potential is given as E°cell = 0.090 V.
Plugging these values into the formula, we get:
ΔG° = -nFE°
ΔG° = -(6 mol e^-)(96,485 C/mol e^-)(0.090 V)
ΔG° = -52,006 J
ΔG° = -52 kJ (rounded to the nearest kilojoule)
Therefore, the answer is (c) -52 kJ.
To calculate the standard free-energy change (ΔG°) for the reaction, you can use the equation ΔG° = -nFE°_cell, where n is the number of moles of electrons transferred, F is the Faraday constant (96,485 C/mol), and E°_cell is the standard cell potential.
In this reaction, 3Pb (s) + 2Fe3+ (aq) → 3Pb2+ (aq) + 2Fe (s), the number of moles of electrons transferred (n) is 6 (2 electrons for each Pb, 3Pb in total).
ΔG° = -nFE°_cell = -6 × 96,485 C/mol × 0.090 V
ΔG° = -519,570 J/mol or -52 kJ/mol (rounded to nearest kJ)
So, the correct answer is c. -52 kJ.
Visit here to learn more about free-energy : https://brainly.com/question/15319033
#SPJ11
To calculate the standard free-energy change (ΔG°) at 25°C for the reaction 3 Pb(s) + 2 Fe³⁺(aq) → 3 Pb²⁺(aq) + 2 Fe(s) with E°cell = 0.090 V, follow these steps:
1. Use the formula: ΔG° = -nFE°cell, where n is the number of moles of electrons transferred, F is Faraday's constant (96,485 C/mol), and E°cell is the standard cell potential.
2. Determine the number of moles of electrons transferred (n) by balancing the half-reactions:
Pb(s) → Pb²⁺(aq) + 2e⁻ (oxidation half-reaction)
Fe³⁺(aq) + 3e⁻ → Fe(s) (reduction half-reaction)
Multiply the first half-reaction by 3 and the second half-reaction by 2 to balance the number of electrons:
3Pb(s) → 3Pb²⁺(aq) + 6e⁻
2Fe³⁺(aq) + 6e⁻ → 2Fe(s)
Therefore, n = 6.
3. Plug the values into the formula: ΔG° = -6 * 96,485 * 0.090.
4. Calculate ΔG°: ΔG° = -51,960 J or -51.96 kJ.
The closest answer is (c) -52 kJ. So, the standard free-energy change at 25°C for this reaction is approximately -52 kJ.
To know more about standard free-energy change:
https://brainly.com/question/13625901
#SPJ11
the alkane c7h16 exhibits structural isomerism. in fact, 9 structural isomers have this same formula (but different bond arrangements). one such isomeric structure is:
Systematic name of this structure is 3-ethylpentane.
Chemical compounds known as isomers have identical chemical formulae but have different properties and atom arrangements inside the molecule. The term "isomer" refers to a substance that exhibits isomerism.
Structural isomers are substances with the same molecular formula but distinct atomic configurations. The way the atoms are attached in this instance is quite different, as seen by the different types of chains that are formed (straight versus branched), the placements of the atoms (such as middle versus end of the parent chain), and the presence of functional groups (e.g., aldehydes versus ketones).
For instance, although sharing the same molecular formula (C3H6O), propanal and propanone have very distinct chemical structures. They are structural isomers as a result.
Isomers of Heptane are:
Heptane (n-heptane)2-Methylhexane (iso-heptane)3-Methylhexane2,2-Dimethylpentane (neo-heptane)2,3-Dimethylpentane2,4-Dimethylpentane3,3-Dimethylpentane3-Ethylpentane2,2,3-TrimethylbutaneTo learn more about isomers, refer:
brainly.com/question/12796779
#SPJ4
The complete question is: The alkane C7H16 exhibits structural isomerism. In fact, 9 structural isomers have this same formula (but different bond arrangements). One such isomeric structure is: What is the correct systematic name for this structure?
Precautions List precautions and explain why they were taken:
when adding water to the rock salt.
during the filtration stage.
during (i) evaporation to dryness and (ii) crystallisation.
Precautions when adding water to rock salt: Add water slowly and carefully to avoid splashing ; Precautions during filtration stage: Use filter paper that fits the funnel properly ; Precautions during (i) evaporation to dryness and (ii) crystallization: Avoid overheating solution during evaporation and stirring the solution.
What is meant by evaporation?Physical process by which a liquid substance is transformed into gaseous state is called evaporation.
Precautions and their explanations:
Precautions when adding water to rock salt:
Add water slowly and carefully to avoid splashing or spilling.
Use a stirring rod to dissolve salt crystals completely.
Explanation: Rock salt can be quite reactive with water, and adding too much water too quickly can cause the solution to boil or splatter. Using a stirring rod helps to dissolve salt crystals completely without creating too much agitation.
Precautions during filtration stage:
Use a filter paper that fits the funnel properly and fold it properly.
Avoid touching filter paper with your fingers.
Explanation: The filter paper needs to fit the funnel properly to ensure that all of the liquid is filtered properly.
Precautions during (i) evaporation to dryness and (ii) crystallization:
Avoid overheating solution during evaporation and stirring the solution.
Use a clean glass rod to encourage crystallization and avoid scratching the walls of the container.
Explanation: Overheating the solution can cause the salt to decompose or change its chemical properties. Stirring the solution can also lead to the formation of smaller crystals.
To know more about evaporation, refer
https://brainly.com/question/9339710
#SPJ1
A 1.4 L flask contains 0.95 g O2 at a temperature of 18.3oC. The the pressure inside the flask is _____atm (round your answer to the thousandths place
To solve this problem, we can use the Ideal Gas Law, which states that the pressure inside the flask is 0.768 atm, rounded to the nearest thousandth.
What is a Gas ?A gas is a state of matter in which a substance has no fixed shape or volume and can expand indefinitely to fill any container in which it is placed. Gases are made up of molecules or atoms that are in constant, random motion and have no long-range order or cohesion.
Gases are compressible, meaning that their volume can be reduced by applying pressure, and they can also expand to fill any available space. The properties of gases are described by gas laws, which relate variables such as temperature, pressure, and volume.
Examples of gases include oxygen, nitrogen, carbon dioxide, and hydrogen. Gases are found in a wide range of natural and human-made environments, including the atmosphere, industrial processes, and many chemical reactions.
To know more about Gas visit :
https://brainly.com/question/3637358
#SPJ1
What is one way in which rocks formed on Mount Moran?
Answer:
A little island of remnant sandstone sits on Mount Moran's summit. Sediments were deposited as sea levels rose throughout the planet, beginning with beach sands (the Flathead Sandstone that sits atop Mount Moran), followed by limestones deposited in shallow waters, and finally mudstones that made up the deeper ocean bottom.
Explanation:
Help needed please and thank u!
1. The mole of the solute is 0.8675 mole
2. The volume (in L) of the solution is 0.25 L
3. The molarity of the solution is 3.47 M
1. How do i determine the mole of the solute?The mole of the solute, NaOH can be obtained as follow:
Mass of solute, NaOH = 34.7 grams Molar mass of solute = 40 g/mol Mole of solute, NaOH =?Mole = mass / molar mass
Mole of solute, NaOH = 34.7 / 40
Mole of solute, NaOH = 0.8675 mole
2. How do i determine the volume (in L)?The volume (in L) can be obtain as follow:
Volume (in mL) = 250 mLVolume (in L) =?1000 mL = 1 L
Therefore,
250 mL = 250 / 1000
250 mL = 0.25 L
Thus, the volume (in L) is 0.25 L
3. How do i determine the molarity?The molarity of the solution can be obtain as follow:
Mole of solute, NaOH = 0.8675 moleVolume of solution = 0.25 LMolarity = ?Molarity of solution = mole / volume
Molarity = 0.8675 / 0.25
Molarity = 3.47 M
Thus, we can conclude that the molarity of the solution is 3.47 M
Learn more about molarity:
https://brainly.com/question/16073358
#SPJ1
a solution of barium hydroxide is mixed with magnesium chloride. what is the classification of the reaction?
When a solution of barium hydroxide is mixed with magnesium chloride, the reaction is classified as a double displacement or metathesis reaction. In this type of reaction, the cations and anions of the reactants swap places to form new products.
The classification of the reaction between a solution of barium hydroxide and magnesium chloride is a double displacement reaction. This is because the barium cation (Ba2+) from barium hydroxide switches places with the magnesium cation (Mg2+) from magnesium chloride, forming barium chloride (BaCl2) and magnesium hydroxide (Mg(OH)2) as the products.
Learn more about barium hydroxide here:
https://brainly.com/question/30888146
#SPJ11
lead is a heavy metal that was released into the air when vehicle engines combusted leaded gasoline prior to its phaseout in the 1970s. what kind of hazard would this be
The release of lead from leaded gasoline combustion is a significant health and environmental hazard.
The arrival of lead high up because of the burning of leaded fuel can bring about a huge natural risk. Lead is a weighty metal that is exceptionally poisonous to people and creatures, and can cause serious medical conditions even at low openness levels. At the point when lead enters the environment, it tends to be breathed in or ingested by people and creatures, prompting a scope of unfriendly wellbeing impacts, including neurological harm, formative postponements, pallor, and kidney harm. Lead can likewise sully soil and water, prompting further openness and ecological defilement. Consequently, the arrival of lead from leaded gas ignition is viewed as a huge wellbeing danger and natural danger.
To learn more about environmental hazard, refer:
https://brainly.com/question/17045565
#SPJ4
Lead released into the air due to the combustion of leaded gasoline in vehicle engines prior to its phaseout in the 1970s would be classified as an environmental hazard. Specifically, it is a form of air pollution that posed significant risks to public health, as exposure to lead can cause various health issues, particularly in children.
The release of lead into the air from vehicle engines combusting leaded gasoline prior to the 1970s phaseout would be considered an environmental hazard. This is because lead is a heavy metal that is toxic to living organisms, including humans, and can have negative effects on the environment and public health. The release of lead into the air can result in air pollution, which can have a range of negative impacts on human health, such as respiratory problems, neurological damage, and developmental issues in children. Additionally, lead can contaminate soil and water, leading to further environmental hazards.
Learn more about environmental hazards here: brainly.com/question/28499949
#SPJ11
How many liters of 2.07 M sulfuric acid are needed to make 57 milliliters of a 0.58 M solution of sulfuric acid?
**Round to FOUR places after the decimal.
We need 0.0161 liters of the 2.07 M sulfuric acid solution to make 57 milliliters of a 0.58 M solution of sulfuric acid.
To solve this problemWe need to use the formula:
C1V1 = C2V2
Where
C1 is the concentration of the initial solutionV1 is the volume of the initial solutionC2 is the concentration of the final solutionV2 is the volume of the final solutionWe want to find the volume of the 2.07 M sulfuric acid solution needed to make 57 milliliters of a 0.58 M solution. Let's plug in the values we know:
2.07 M * V1 = 0.58 M * 57 mL
Simplifying the equation, we get:
V1 = (0.58 M * 57 mL) / 2.07 M
V1 = 16.0874 mL
To convert the volume to liters, we divide by 1000:
V1 = 16.0874 mL / 1000 mL/L
V1 = 0.0161 L
Therefore, we need 0.0161 liters of the 2.07 M sulfuric acid solution to make 57 milliliters of a 0.58 M solution of sulfuric acid.
Learn more about concentration here : brainly.com/question/28564792
#SPJ1
rade 11 Text Books Exercise 5.4 Answer the following questions: 1. 5.0 mole of ammonia were introduced into a 5.0 L reaction chamber in which it is partially decomposed at high temperatures. CHEMISTRY GRADE 11 267 2NH₂(g) 3H₂(g) + N₂(g) At equilibrium at a particular temperature, 80.0% of the ammonia had reacted. Calculate K for the reaction.
At the given temperature, the equilibrium constant K for the reaction is 0.5625 mol/L.
How to determine equilibrium constant?The balanced chemical equation for the reaction is:
2NH₃(g) ⇌ 3H₂(g) + N₂(g)
The equilibrium expression for the reaction is:
K = [H₂]³[N₂] / [NH₃]²
Given that 5.0 moles of NH₃ were introduced into a 5.0 L reaction chamber, the initial concentration of NH₃ is:
[NH₃]₀ = 5.0 mol / 5.0 L = 1.0 mol/L
At equilibrium, 80.0% of the NH₃ had reacted, which means that 20.0% of NH₃ remains. Therefore, the equilibrium concentration of NH₃ is:
[NH₃] = 0.20 x 1.0 mol/L = 0.2 mol/L
The equilibrium concentrations of H₂ and N₂ can be calculated from the balanced equation:
[H₂] = (3/2) x [NH₃] = 0.3 mol/L
[N₂] = [NH₃] / 2 = 0.1 mol/L
Substituting these values into the equilibrium expression gives:
K = [H₂]³[N₂] / [NH₃]²
K = (0.3 mol/L)³ x (0.1 mol/L) / (0.2 mol/L)²
K = 0.5625 mol/L
Therefore, the equilibrium constant K for the reaction at the given temperature is 0.5625 mol/L.
Find out more on equilibrium constant here: https://brainly.com/question/19340344
#SPJ1
Which of the following is an advantage of sexual reproduction over asexual reproduction?
A.
There is a higher chance of genetic mutation.
B.
The rate of reproduction is slower.
C.
Offspring are genetically different from their parents.
D.
Many more offspring can be produced.
The correct option is C. Offspring are genetically different from their parents is an advantage of sexual reproduction over asexual reproduction
What mental benefits do sexual reproduction have over asexual reproduction?More variations are formed during sexual reproduction. As a result, more species will survive in a population. The newly produced people exhibit traits from both parents. It causes genetic variances, which encourage character variety.
Asexual and sexual reproduction: what are they?The two ways that organisms reproduce are asexually and sexually. Male and female gametes do not combine during asexual reproduction. In bacteria, amoebas, hydra, etc., this occurs. Male and female gametes are fused during sexual reproduction, which occurs in both humans and many other animals.
To know more about advantage visit:-
https://brainly.com/question/24494907
#SPJ1
how much energy, in kj, is carried by one mole of photons of green light emitted by a fluorescent proflavine molecule at 514 nm?
To calculate the energy carried by one mole of photons of green light emitted by a fluorescent proflavine molecule at 514 nm, we'll use the energy formula: [tex]E = h * c /\lambda[/tex] where E is the energy of a single photon, h is Planck's constant ([tex]6.626 *10^{-34} Js[/tex]), c is the speed of light ([tex]2.998 * 10^8 m/s[/tex]), and λ is the wavelength (514 nm).
First, convert the wavelength to meters:
[tex]514 nm = 514 * 10^{-9} m[/tex].
Next, calculate the energy of a single photon:
[tex]E = (6.626 * 10^{-34} Js) * (2.998 * 10^8 m/s) / (514 * 10^{-9} m) = 3.872 * 10^{-19} J.[/tex]
Now, to find the energy carried by one mole of photons, multiply the energy of a single photon by Avogadro's number ([tex]6.022 x 10^{23[/tex]):
Energy per mole =[tex](3.872 *10^{-19 }J) * (6.022 * 10^{23}) = 233.0 kJ.[/tex]
Thus, one mole of photons of green light emitted by a fluorescent proflavine molecule at 514 nm carries 233.0 kJ of energy.
Learn more about fluorescent here:
https://brainly.com/question/24228588
#SPJ11
The first ores that were widely smelted by humans to produce metal were those of ____________.
a. bronze
b. copper
c. gold
d. iron
The first ores that were widely smelted by humans to produce metal were those of copper, option .
Ore is a naturally occurring rock or silt that includes precious minerals that are concentrated above background levels and may be mined, processed, and sold profitably. Metals are the most common valuable minerals found in ore. The concentration of the desired ingredient in an ore is referred to as its grade.
To decide if a rock has a high enough grade to be worth mining and is thus regarded as an ore, the value of the metals or minerals it contains must be evaluated against the expense of extraction. An ore that contains many precious minerals is said to be complex. Typically, oxides, sulphides, silicates, or native metals like copper or gold are the minerals of interest.
Learn more about Ores:
https://brainly.com/question/28635854
#SPJ4
The first ores that were widely smelted by humans to produce metal were those of copper.
Metals are a crucial part of the history of mankind and cannot be left out. In fact, it was quite common for historians to describe particular historical eras using metals that were in use at the time. The Stone Age, Bronze Age, and Iron Age, among others, all existed. One of the metals that man has used since very ancient times is copper. In actuality, copper was the first metal that man ever discovered, in the year 9000 BCE. Gold, silver, tin, lead, and iron were also used in prehistoric times.
Chemically speaking, copper is an element known as Cuprum. Cu is its chemical symbol. Cuprum, a Latin word, literally translates as "from the island of Cyprus." Its colour is a reddish-brown metal.
Visit here to learn more about copper : https://brainly.com/question/2289251
#SPJ11
The reactants needed to produce simple polyamides (nylons) are
diacids and diamines
alkenes and catalysts.
diamines and dialcohols.
diacids and dialcohols.
diacids and phosphates.
The reactants needed to produce simple polyamides (nylons) are diacids and diamines. Option 1 is correct.
Polyamides or nylons are a type of synthetic polymer that contains amide groups (-CONH-) in their backbone. The synthesis of nylons involves a condensation reaction between a diacid and a diamine, resulting in the formation of amide linkages between the monomers.
The diacid provides the carboxylic acid (-COOH) groups, while the diamine provides the amine (-NH₂) groups for the reaction. The reaction involves the elimination of water molecules, and the resulting polymer is formed through the repeated amide linkages between the monomers. Hence Option 1 is correct.
To learn more about diacids and diamines, here
https://brainly.com/question/14046416
#SPJ4
What volume occupied by 256 g of SO2 gas at 227C and 1520 torr? (Molar mass of SO2 is 64.07 g/mol, 760 torr = 1 atm)10.7 L68.5 L 0.108 L37.2 L82.0 L
the volume occupied by 256 g of SO2 gas at 227°C and 1520 torr is 82.0 L.
We can use the Ideal Gas Law to find the volume occupied by the SO2 gas. The Ideal Gas Law is:
PV = nRT
where P is pressure, V is volume, n is the number of moles, R is the Ideal Gas Constant, and T is temperature in Kelvin.
First, let's convert the given values to appropriate units:
1. Mass of SO2 = 256 g
2. Molar mass of SO2 = 64.07 g/mol
3. Pressure = 1520 torr = (1520/760) atm = 2 atm (since 760 torr = 1 atm)
4. Temperature = 227°C = (227 + 273.15) K = 500.15 K
5. Ideal Gas Constant, R = 0.0821 L atm/mol K (using the appropriate value for the given units)
Now, calculate the number of moles (n) of SO2:
n = mass / molar mass = 256 g / 64.07 g/mol = 4 moles
Next, substitute the values into the Ideal Gas Law equation:
2 atm × V = 4 moles × 0.0821 L atm/mol K × 500.15 K
Now, solve for V:
V = (4 moles × 0.0821 L atm/mol K × 500.15 K) / 2 atm = 82.0 L
So, the volume occupied by 256 g of SO2 gas at 227°C and 1520 torr is 82.0 L.
lear more about volume here
https://brainly.com/question/29042267
#SPJ11
The volume occupied by 256 g of [tex]SO_{2}[/tex] gas at 227°C and 1520 torr is 82.0 L.
How to find the volume occupied by gas?To find the volume occupied by 256 g of [tex]SO_{2}[/tex] gas at 227°C and 1520 torr, we can use the Ideal Gas Law formula: PV = nRT.
1. First, convert the mass of [tex]SO_{2}[/tex] to moles: 256 g / (64.07 g/mol) = 3.99 moles
2. Convert the temperature from Celsius to Kelvin: 227°C + 273.15 = 500.15 K
3. Convert the pressure from torr to atm: 1520 torr / (760 torr/atm) = 2 atm
4. Use the Ideal Gas Law, with R = 0.0821 L*atm/mol*K:
(2 atm) * V = (3.99 moles) * (0.0821 L*atm/mol*K) * (500.15 K)
5. Solve for V:
V = (3.99 moles * 0.0821 L*atm/mol*K * 500.15 K) / 2 atm = 82.0 L
To know more about Ideal Gas Law:
https://brainly.com/question/22431705
#SPJ11
Write the chemical formulas for each of the following compounds: a. tin(II) hydroxide b. barium fluoride pr- c. tetraiodide nonoxide d. iron(III) oxalate
The chemical formulas for these compounds:
a. Tin(II) hydroxide: Sn(OH)₂
b. Barium fluoride: BaF₂
c. Tetraiodide nonoxide: I₄O₉
d. Iron(III) oxalate: Fe₂(C₂O₄)₃
A set of guidelines used to produce systematic names for chemical compounds is known as a chemical nomenclature. The International Union of Pure and Applied Chemistry (IUPAC) developed and produced the nomenclature that is most frequently used globally.
The Red Book and Blue Book, respectively, are two publications that contain the IUPAC's rules for naming organic and inorganic compounds. A fourth book, the Gold Book, defines many of the technical terms used in chemistry, while a third, the Green Book, advises the use of symbols for physical quantities (in conjunction with the IUPAP). There are comparable compendia for clinical chemistry (the Silver Book), analytical chemistry (the Orange Book), macromolecular chemistry (the Purple Book), and biochemistry (the White Book, in association with the IUBMB).
Visit here to learn more about chemical nomenclature : https://brainly.com/question/6496952
#SPJ11
The chemical formulas for each of the following compounds:
a. Tin(II) hydroxide:
Tin(II) indicates that tin has a charge of +2. Hydroxide has a charge of -1. To balance the charges, we need two hydroxide ions for each tin ion.
Chemical formula: Sn(OH)₂
b. Barium fluoride:
Barium has a charge of +2, while fluoride has a charge of -1. To balance the charges, we need two fluoride ions for each barium ion.
Chemical formula: BaF₂
c. Tetraiodide nonoxide:
Tetra- means 4 and nona- means 9. So, there are 4 iodide atoms and 9 oxide atoms in the compound.
Chemical formula: I₄O₉
d. Iron(III) oxalate:
Iron(III) indicates that iron has a charge of +3. Oxalate is a polyatomic ion with a charge of -2. To balance the charges, we need two iron ions and three oxalate ions.
Chemical formula: Fe₂(C₂O₄)₃
To know more about Tetraiodide non-oxide:
https://brainly.com/question/31542837
#SPJ11
a 35.0-ml sample of 0.20 m lioh is titrated with 0.25 m hcl. what is the ph of the solution after 23.0 ml of hcl have been added to the base? group of answer choices 1.26 12.74 12.33 13.03 1.67
The pH of the solution after 23.0 mL of 0.25 M HCl have been added to the 35.0 mL of 0.20 M LiOH is 12.74.
1. Calculate the initial moles of LiOH and HCl:
LiOH: 35.0 mL * 0.20 mol/L = 7.00 mmol
HCl: 23.0 mL * 0.25 mol/L = 5.75 mmol
2. Determine the limiting reactant and find the moles of unreacted LiOH:
Since HCl is the limiting reactant, subtract its moles from LiOH moles:
7.00 mmol - 5.75 mmol = 1.25 mmol of unreacted LiOH
3. Calculate the new concentration of LiOH in the solution:
Total volume: 35.0 mL + 23.0 mL = 58.0 mL
New concentration: 1.25 mmol / 58.0 mL = 0.02155 mol/L
4. Calculate the pOH of the solution:
pOH = -log10(0.02155) = 1.66
5. Find the pH of the solution:
pH = 14 - pOH = 14 - 1.66 = 12.74
To know more about pH click on below link:
https://brainly.com/question/491373#
#SPJ11
the electrolysis of bio produces pure bismuth. how long would it take to produce 10.0 g of bi by the electrolysis of a bio solution using a current of 25.0 a?
The amount of time taken to produce 10 g Bi by the electrolysis of a BiO solution using a current of 25 A is 9.2 minutes.
Direct electric current is used in the electrolysis process to accelerate chemical reactions that would not naturally occur. As a step in the electrolytic cell-based separation of elements from naturally existing sources like ores, electrolysis is significant from a commercial standpoint.
In BiO+, Bi has an oxidation number of 3+, so it’ll take 3 moles of electrons per mole of Bi.
10.0 g Bi x 1 mole/209g = 0.0478 moles Bi
0.0478 moles Bi x 3 moles electrons/mol Bi = 0.1434 moles electrons
0.1434 mol e- x 96,485 C/mole = 13836 Coulombs
1 C = 1 amp/sec
13836 C = 25 A x time
time = 553 seconds = 9.2 minutes
To produce the bio solution using a current is 9.2 minutes.
Learn more about electrolysis :
https://brainly.com/question/31358933
#SPJ4
It would take approximately 185 seconds, or just over 3 minutes, to produce 10.0 g of bismuth by the electrolysis of a bio solution using a current of 25.0 A.
To determine the time it would take to produce 10.0 g of bismuth by the electrolysis of a bio solution using a current of 25.0 A, we need to use Faraday's law.
First, we need to find the number of moles of bismuth required to produce 10.0 g. The molar mass of bismuth is 208.98 g/mol, so:
10.0 g Bi / 208.98 g/mol = 0.0478 mol Bi
Next, we can use Faraday's law, which states that the amount of product produced is proportional to the amount of charge (in Coulombs) passed through the solution. The equation is:
moles of product = (charge in Coulombs) / (Faraday's constant)
where the Faraday's constant is 96,485 C/mol e-.
We can rearrange this equation to solve for the charge:
charge = (moles of product) x (Faraday's constant)
Plugging in the values we found earlier, we get:
charge = 0.0478 mol Bi x 96,485 C/mol e- = 4,632 C
Finally, we can use the formula for current:
current = charge / time
Rearranging this equation to solve for time, we get:
time = charge / current
Plugging in the values we found earlier, we get:
time = 4,632 C / 25.0 A = 185 s
To learn more about molar mass click here
brainly.com/question/22997914
#SPJ11
which of the following describes an atactic stereoisomer? select one: a. all of the r groups are situated on the same side of the chain b. all of the r groups alternate sides of the chain c. the r groups are randomly positioned on sides of the chain d. all of the r groups are in the trans structure
C. the r groups are randomly positioned on sides of the chain
Atactic stereoisomers are a type of stereoisomer in which the substituents (R groups) are randomly positioned on sides of the chain. This means that the stereoisomer does not have any specific configuration or arrangement of the R groups along the chain; instead, the R groups are randomly positioned with no pattern.
Atactic stereoisomers are different from other stereoisomers such as enantiomers and diastereomers, which have specific configurations of the R groups. Atactic stereoisomers also differ from isotactic stereoisomers, which have all of the R groups on the same side of the chain, and syndiotactic stereoisomers, which have the R groups alternating sides of the chain.
Know more about Atactic stereoisomers here
https://brainly.com/question/24128816#
#SPJ11
You are trying to determine the concentration of a stock solution of hydrochloric acid. You have 450.80 mL of 0.86 M dilute solution that was prepared with 25.50 of stock solution
The hydrochloric acid stock solution has a 15.2472 M concentration.
What is the HCl formula?The chemical formula of hydrochloric acid is H+Cl-, making it a potent acid. It quickly releases hydrogen ions in aqueous solutions and, depending on concentration, has a pH ranging from -0.5 to -1.1.
We can use the dilution equation to calculate the hydrochloric acid stock solution's concentration:
C1V1 = C2V2
where C2 is the concentration of the diluted solution, V2 is the total volume of the diluted solution, V1 is the volume of the stock solution utilized, and C1 is the concentration of the stock solution.
What we have here is
C1 x 25.50 mL = 0.86 M x 450.80 mL
For C1, we solve as follows:
C1 = 0.86 M x 450.80 mL / 25.50 mL
C1 = 15.2472 M
Therefore, 15.2472 M of hydrochloric acid is present in the stock solution.
To know more about hydrochloric acid visit:
https://brainly.com/question/13529493
#SPJ1
Calculate the standard free-energy change at 25 ∘C for the following reaction: Mg2+(aq) + Zn(s) → Mg(s) + Zn2+(aq) Express your answer to three significant figures and in units of kJ/mol.
Consider constructing a voltaic cell with one compartment containing a Zn(s) electrode immersed in a Zn2+ aqueous solution and the other compartment containing an Al(s) electrode immersed in an Al3+ aqueous solution. What is the spontaneous reaction in this cell?
Group of answer choices
Zn + Al3+ → Al + Zn2+
Al + Zn2+ → Zn + Al3+
3 Zn + 2 Al3+ → 2 Al + 3 Zn2+
2 Al + 3 Zn2+ → 3 Zn + 2 Al3+
Nickel and iron electrodes are used to build a voltaic cell. Based on the standard reduction potentials of Ni2+ and Fe3+, what is the shorthand notation for this voltaic cell?
Group of answer choices
Ni2+(aq)|Ni(s)||Fe(s)|Fe3+(aq)
Fe3+(aq)|Fe(s)||Ni(s)|Ni2+(aq)
Ni(s)|Ni2+(aq)||Fe3+(aq)|Fe(s)
Fe(s)|Fe3+(aq)||Ni2+(aq)|Ni(s)
For the voltaic cell with nickel and iron electrodes, the shorthand notation is:
Ni(s)|Ni2+(aq)||Fe3+(aq)|Fe(s)
To calculate the standard free-energy change at 25°C for the reaction Mg2+(aq) + Zn(s) → Mg(s) + Zn2+(aq), we need to use the formula:
ΔG° = -nFE°
where ΔG° is the standard free-energy change, n is the number of moles of electrons transferred, F is Faraday's constant (96,485 C/mol), and E° is the standard cell potential.
Step 1: Determine the half-reactions and their standard reduction potentials.
Mg2+(aq) + 2e- → Mg(s) E° = -2.37 V
Zn2+(aq) + 2e- → Zn(s) E° = -0.76 V
Step 2: Determine the overall cell potential.
E°(cell) = E°(reduction) - E°(oxidation)
E°(cell) = (-0.76 V) - (-2.37 V) = 1.61 V
Step 3: Calculate the standard free-energy change.
ΔG° = -nFE°
ΔG° = -2 mol e- * 96,485 C/mol e- * 1.61 V
ΔG° = -310.44 kJ/mol
The standard free-energy change for this reaction at 25°C is -310 kJ/mol (rounded to three significant figures).
For the voltaic cell with Zn(s) and Al(s) electrodes, the spontaneous reaction is:
2 Al + 3 Zn2+ → 3 Zn + 2 Al3+
For the voltaic cell with nickel and iron electrodes, the shorthand notation is:
Ni(s)|Ni2+(aq)||Fe3+(aq)|Fe(s)
To know more about voltaic cell :
https://brainly.com/question/1370699
#SPJ11
For the voltaic cell with nickel and iron electrodes, based on the standard reduction potentials of Ni2+ and Fe3+, the shorthand notation for this voltaic cell is:
Ni(s)|Ni2+(aq)||Fe3+(aq)|Fe(s)
To calculate the standard free-energy change at 25°C for the reaction Mg2+(aq) + Zn(s) → Mg(s) + Zn2+(aq), we can use the following equation:
ΔG° = -nFE°
Where ΔG° is the standard free-energy change, n is the number of moles of electrons transferred in the reaction, F is Faraday's constant (96,485 C/mol), and E° is the standard cell potential.
First, we need to determine E°. We do this by looking up the standard reduction potentials for both half-reactions:
Mg2+(aq) + 2e- → Mg(s) E° = -2.37 V
Zn2+(aq) + 2e- → Zn(s) E° = -0.76 V
We can find the overall E° by subtracting the reduction potential of the reaction we need to reverse (Zn(s) → Zn2+(aq) + 2e-):
E° = -2.37 V - (-0.76 V) = -1.61 V
In this reaction, n = 2 since there are 2 moles of electrons transferred. Now we can calculate ΔG°:
ΔG° = -2 × 96,485 C/mol × (-1.61 V) = 310 kJ/mol (rounded to three significant figures)
For the voltaic cell with Zn(s) and Al(s) electrodes, the spontaneous reaction is:
2 Al + 3 Zn2+ → 3 Zn + 2 Al3+
For the voltaic cell with nickel and iron electrodes, based on the standard reduction potentials of Ni2+ and Fe3+, the shorthand notation for this voltaic cell is:
Ni(s)|Ni2+(aq)||Fe3+(aq)|Fe(s)
learn more about electrodes here
https://brainly.com/question/17060277
#SPJ11