Answer: C
Frictional force
Explanation:
The description of the question above is an example of a circular motion.
For a car travelling in a curved path, the frictional force between the tyres and the road surface will provide the centripetal force.
Since the road is banked, and the cross section of the banked road is constructed like a ramp. The car drives transversely to the slope of the ramp, so that the wheels of one side of the car are lower than the wheels on the other side of the car, for cornering the banked road, the car will not rely only on the frictional force.
Therefore, the correct answer is option C - the frictional force.
In a double-slit arrangement the slits are separated by a distance equal to 150 times the wavelength of the light passing through the slits. (a) What is the angular separation between the central maximum and an adjacent maximum
Complete Question
In a double-slit arrangement the slits are separated by a distance equal to 150 times the wavelength of the light passing through the slits. (a) What is the angular separation between the central maximum and an adjacent maximum? (b) What is the distance between these maxima on a screen 57.9 cm from the slits?
Answer:
a
[tex]\theta = 0.3819^o[/tex]
b
[tex]y = 0.00386 \ m[/tex]
Explanation:
From the question we are told that
The slit separation is [tex]d = 150 \lambda[/tex]
The distance from the screen is [tex]D = 57.9 \ cm = 0.579 \ m[/tex]
Generally the condition for constructive interference is mathematically represented as
[tex]dsin (\theta ) = n * \lambda[/tex]
=> [tex]\theta = sin ^{-1} [\frac{n * \lambda }{ d } ][/tex]
where n is the order of the maxima and value is 1 because we are considering the central maximum and an adjacent maximum
and [tex]\lambda[/tex] is the wavelength of the light
So
[tex]\theta = sin ^{-1} [\frac{ 1 * \lambda }{ 150 \lambda } ][/tex]
[tex]\theta = 0.3819^o[/tex]
Generally the distance between the maxima is mathematically represented as
[tex]y = D tan (\theta )[/tex]
=> [tex]y = 0.579 tan (0.3819 )[/tex]
=> [tex]y = 0.00386 \ m[/tex]
Which of the following explains why metallic bonding only occurs between
metallic atoms?
A. Metallic atoms are less likely to give their electrons to nonmetallic
atoms
B. Electrical conductivity is higher in metallic atoms, which means
they are more likely to attract free electrons.
C. Metallic atoms are highly reactive and do not tend to form bonds
with other atoms.
D. Metallic atoms have valence shells that are mostly empty, which
means these atoms are more likely to give up electrons and allow
them to move freely.
Answer:
D. Metallic atoms have valence shells that are mostly empty, which
means these atoms are more likely to give up electrons and allow
them to move freely.
Explanation:
Metals usually contain very few electrons in their valence shells hence they easily give up these few valence electrons to yield metal cations.
In the metallic bond, metal cations are held together by electrostatic attraction between the metal ions and a sea of mobile electrons.
Since metals give up their electrons easily, it is very easy for them to participate in metallic bonding. They give up their electrons easily because their valence shells are mostly empty, metal valence shells usually contain only a few electrons.
A student builds a rocket-propelled cart for a science project. Its acceleration is not quite high enough to win a prize, so he uses a larger rocket engine that provides 39% more thrust, although doing so increases the mass of the cart by 13%. By what percentage does the cart's acceleration increase?
Answer:
Explanation:
a = F / m
where a is acceleration , F is thrust and m is mass
taking log and differentiating
da / a = dF / F - dm / m
(da / a)x 100 = (dF / F)x100 - (dm / m) x100
percentage increase in a = percentage increase in F - percentage increase in m
= percentage increase in acceleration a = 39 - 13 = 26 %
required increase = 26 %.
Four 50-g point masses are at the corners of a square with 20-cm sides. What is the moment of inertia of this system about an axis perpendicular to the plane of the square and passing through its center
Answer:
moment of inertia I ≈ 4.0 x 10⁻³ kg.m²
Explanation:
given
point masses = 50g = 0.050kg
note: m₁=m₂=m₃=m₄=50g = 0.050kg
distance, r, from masses to eachother = 20cm = 0.20m
the distance, d, of each mass point from the centre of the mass, using pythagoras theorem is given by
= (20√2)/ 2 = 10√2 cm =14.12 x 10⁻² m
moment of inertia is a proportion of the opposition of a body to angular acceleration about a given pivot that is equivalent to the entirety of the products of every component of mass in the body and the square of the component's distance from the center
mathematically,
I = ∑m×d²
remember, a square will have 4 equal points
I = ∑m×d² = 4(m×d²)
I = 4 × 0.050 × (14.12 x 10⁻² m)²
I = 0.20 × 1.96 × 10⁻²
I = 3.92 x 10⁻³ kg.m²
I ≈ 4.0 x 10⁻³ kg.m²
attached is the diagram of the equation
EXAMPLE 5 Find the radius of gyration about the x-axis of a homogeneous disk D with density rho(x, y) = rho, center the origin, and radius a. SOLUTION The mass of the disk is m = rhoπa2, so from these equations we have 2 = Ix m = 1 4πrhoa4 rhoπa2 = a2 4 .
Answer:
Radius of gyration = a/2.
Explanation:
So, from the question above I can see that the you are already answering the question and you are stuck up or maybe that's how the problem is set from the start. Do not worry, you are covered in any of the ways. So, from the question we have that;
"The mass of the disk is m = ρπa^2, so from these equations we have y^2 = Ix/m."
(NB: I changed the "rho" word to its symbol).
Thus, the radius of gyration with respect to x-axis = (1/4 πρa^4)/ πρa^2 = a^2/4.
Therefore, the Radius of gyration = a/2.
Question 8
A spring is attached to the ceiling and pulled 8 cm down from equilibrium and released. The
damping factor for the spring is determined to be 0.4 and the spring oscillates 12 times each
second. Find an equation for the displacement, D(t), of the spring from equilibrium in terms of
seconds, t.
D(t) =
Can someone please help me ASAP?!!!!
Answer: D(t) = [tex]8.e^{-0.4t}.cos(\frac{\pi }{6}.t )[/tex]
Explanation: A harmonic motion of a spring can be modeled by a sinusoidal function, which, in general, is of the form:
y = [tex]a.sin(\omega.t)[/tex] or y = [tex]a.cos(\omega.t)[/tex]
where:
|a| is initil displacement
[tex]\frac{2.\pi}{\omega}[/tex] is period
For a Damped Harmonic Motion, i.e., when the spring doesn't bounce up and down forever, equations for displacement is:
[tex]y=a.e^{-ct}.cos(\omega.t)[/tex] or [tex]y=a.e^{-ct}.sin(\omega.t)[/tex]
For this question in particular, initial displacement is maximum at 8cm, so it is used the cosine function:
[tex]y=a.e^{-ct}.cos(\omega.t)[/tex]
period = [tex]\frac{2.\pi}{\omega}[/tex]
12 = [tex]\frac{2.\pi}{\omega}[/tex]
ω = [tex]\frac{\pi}{6}[/tex]
Replacing values:
[tex]D(t)=8.e^{-0.4t}.cos(\frac{\pi}{6} .t)[/tex]
The equation of displacement, D(t), of a spring with damping factor is [tex]D(t)=8.e^{-0.4t}.cos(\frac{\pi}{6} .t)[/tex].
two resistors of resistance 10 ohm's and 20 ohm's are connected in parallel to a batery of e.m.f 12V. Calculate the current passing through the 20hm's resister
Determine the slit spacing d. Explain which measurement you made, show your calculation and your result for the slit spacing. There are several measurements you can make.
Answer:
The quantities to measure are:
* the distance to the screen
* The distance from the central maximum to each interference
* in order of interference
* wavelength
Explanation:
To determine the gap spacing we must use the constructive interference equation
d sin θ = m λ
as the angles are small
tan θ = sin θ / cos θ
tan θ = sin θ
and the definition of tangent is
tan θ = y / L
Thus
sin θ = y / L
when replacing
d y / L = m λ
d = m λ L / y
with this equation we can know what parameter should be measured.
The quantities to measure are:
* the distance to the screen
* The distance from the central maximum to each interference
* in order of interference
* wavelength
1.5 kg of air within a piston-cylinder assembly executes a Carnot power cycle with maximum and minimum temperatures of 800 K and 300 K, respectively. The heat transfer from the air during the isothermal compression is 80 kJ. At the end of the isothermal compression, the volume is 0.2 m3. Determine the volume at the beginning of the isothermal compression, in m3. Assume the ideal gas model for air and neglect kinetic and potential energy effects.
Answer:
Explanation:
Carton cycle consists of four thermodynamic processes . The first is isothermal expansion at higher temperature , then adiabatic expansion which lowers the temperature of gas . The third process is isothermal compression at lower temperature and the last process is adiabatic compression which increases the temperature of the gas to its original temperature .
So the given process of isothermal compression must have been done at the temperature of 300K , keeping the temperature constant .
Work done on gas at isothermal compression is equal to heat transfer .
work done on gas = 80 x 10³ J
work done on gas = n RT ln v₁ / v₂
n is number of moles v₁ and v₂ are initial and final volume
molecular weight of gas = 28.97 g
1.5 kg = 1500 / 28.97 moles
= 51.77 moles
work done on gas = n RT ln v₁ / v₂
Putting the values in the equation above
80 x 10³ = 51.78 x 8.31 x 300 x ln v₁ / .2
ln v₁ / .2 = .62
v₁ / .2 = 1.8589
v₁ = 0.37 m³
Suppose that a 117.5 kg football player running at 6.5 m/s catches a 0.43 kg ball moving at a speed of 26.5 m/s with his feet off the ground, while both of them are moving horizontally.
(a) Calculate the final speed of the player, in meters per second, if the ball and player are initially moving in the same direction.
(b) Calculate the change in kinetic energy of the system, in joules, after the player catches the ball.
(c) Calculate the final speed of the player, in meters per second, if the ball and player are initially moving in opposite directions.
(d) Calculate the change in kinetic energy of the system, in joules, in this case.
Answer:
a) 6.57 m/s
b) 53.75 J
c) 6.37 m/s
d) -98.297 J
Explanation:
mass of player = [tex]m_{p}[/tex] = 117.5 kg
speed of player = [tex]v_{p}[/tex] = 6.5 m/s
mass of ball = [tex]m_{b}[/tex] = 0.43 kg
velocity of ball = [tex]v_{b}[/tex] = 26.5 m/s
Recall that momentum of a body = mass x velocity = mv
initial momentum of the player = mv = 117.5 x 6.5 = 763.75 kg-m/s
initial momentum of the ball = mv = 0.43 x 26.5 = 11.395 kg-m/s
initial kinetic energy of the player = [tex]\frac{1}{2} mv^{2}[/tex] = [tex]\frac{1}{2}[/tex] x 117.5 x [tex]6.5^{2}[/tex] = 2482.187 J
a) according to conservation of momentum, the initial momentum of the system before collision must equate the final momentum of the system.
for this first case that they travel in the same direction, their momenta carry the same sign
[tex]m_{p}[/tex][tex]v_{p}[/tex] + [tex]m_{b}[/tex][tex]v_{b}[/tex] = ([tex]m_{p}[/tex] +[tex]m_{b}[/tex])v
where v is the final velocity of the player.
inserting calculated momenta of ball and player from above, we have
763.75 + 11.395 = (117.5 + 0.43)v
775.145 = 117.93v
v = 775.145/117.93 = 6.57 m/s
b) the player's new kinetic energy = [tex]\frac{1}{2} mv^{2}[/tex] = [tex]\frac{1}{2}[/tex] x 117.5 x [tex]6.57^{2}[/tex] = 2535.94 J
change in kinetic energy = 2535.94 - 2482.187 = 53.75 J gained
c) if they travel in opposite direction, equation becomes
[tex]m_{p}[/tex][tex]v_{p}[/tex] - [tex]m_{b}[/tex][tex]v_{b}[/tex] = ([tex]m_{p}[/tex] +[tex]m_{b}[/tex])v
763.75 - 11.395 = (117.5 + 0.43)v
752.355 = 117.93v
v = 752.355/117.93 = 6.37 m/s
d) the player's new kinetic energy = [tex]\frac{1}{2} mv^{2}[/tex] = [tex]\frac{1}{2}[/tex] x 117.5 x [tex]6.37^{2}[/tex] = 2383.89 J
change in kinetic energy = 2383.89 - 2482.187 = -98.297 J
that is 98.297 J lost
"A power of 200 kW is delivered by power lines with 48,000 V difference between them. Calculate the current, in amps, in these lines."
Answer:
9.6×10⁹ A
Explanation:
From the question above,
P = VI.................... Equation 1
Where P = Electric power, V = Voltage, I = current.
make I the subject of the equation
I = P/V............. Equation 2
Given: P = 200 kW = 200×10³ W, V = 48000 V.
Substitute these vales into equation 2
I = 200×10³×48000
I = 9.6×10⁹ A.
Hence the current in the line is 9.6×10⁹ A.
g a conductor consists of an infinite number of adjacent wires, each infinitely long. If there are n wires per unit length, what is the magnitude of B~
Answer:
B=uonI/2
Explanation:
See attached file
4. The Richter scale describes how much energy an earthquake releases. With every increase of 1.0 on the scale, 32 times more energy is released. How many times more energy would be released by a quake measuring 2.0 more units on the Richter scale?
Answer:
64 times
Explanation:
if increase of 1 gives you 32
then increase of 2 will give you its double
64
If you increase one, you get 32 then multiplying by 2 will give you 64, which is its double.
What is Earthquake?An earthquake is a sudden energy released in the Earth's lithosphere that causes shock wave, which cause the Earth's surface to shake. Earthquakes can range in strength from ones that are so small that no one can feel them to quakes that are so powerful that they uproot entire cities, launch individuals and objects into the air, and harm vital infrastructure.
The frequency, kind, and intensity of earthquakes observed over a specific time period are considered to be the seismic activity of an area.
The average rate of earthquake energy output per unit volume determines the basicity of a certain area of the Earth. The non-earthquake seismic rumbling is also alluded to as a tremor.
To know more about Earthquake:
https://brainly.com/question/1296104
#SPJ5
Solve 3* +5-220t = 0
Answer:
t = 27.5
Explanation:
[tex]3 + 5 -220t = 0[/tex]
Well to solve for t we need to combine like terms and seperate t.
So 3+5= 8
8 - 220t = 0
We do +220 to both sides
8 = 220t
And now we divide 220 by 8 which is 27.5
Hence, t = 27.5
An object has an acceleration of 6.0 m/s/s. If the net force was doubled and the mass was one-third the original value, then the new acceleration would be _____ m/s/s.
Hahahahaha. Okay.
So basically , force is equal to mass into acceleration.
F=ma
so when F=ma , we get acceleration=6m/s/s
Force is doubled.
Mass is 1/3 times original.
2F=1/3ma
Now , we rearrange , and we get 6F=ma
So , now for 6 times the original force , we get 6 times the initial acceleration.
So new acceleration = 6*6= 36m/s/s
A uniform stick 1.5 m long with a total mass of 250 g is pivoted at its center. A 3.3-g bullet is shot through the stick midway between the pivot and one end The bullet approaches at 250 m/s and leaves at 140 m/s
With what angular speed is the stick spinning after the collision?
Answer:
63.44 rad/s
Explanation:
mass of bullet = 3.3 g = 0.0033 kg
initial velocity of bullet [tex]v_{1}[/tex] = 250 m/s
final velocity of bullet [tex]v_{2}[/tex] = 140 m/s
loss of kinetic energy of the bullet = [tex]\frac{1}{2}m(v^{2} _{1} - v^{2} _{2})[/tex]
==> [tex]\frac{1}{2}*0.0033*(250^{2} - 140^{2} )[/tex] = 70.785 J
this energy is given to the stick
The stick has mass = 250 g =0.25 kg
its kinetic energy = 70.785 J
from
KE = [tex]\frac{1}{2} mv^{2}[/tex]
70.785 = [tex]\frac{1}{2}*0.25*v^{2}[/tex]
566.28 = [tex]v^{2}[/tex]
[tex]v= \sqrt{566.28}[/tex] = 23.79 m/s
the stick is 1.5 m long
this energy is impacted midway between the pivot and one end of the stick, which leaves it with a radius of 1.5/4 = 0.375 m
The angular speed will be
Ω = v/r = 23.79/0.375 = 63.44 rad/s
A piece of electronic equipment that is surrounded by packing material is dropped so that it hits the ground with a speed of 4 m/s. After impact, the equipment experiences an acceleration of a = 2kx, where k is a constant and x is the compression of the packing material. If the packing material experiences a maximum compression of 20 mm, determine the maximum acceleration of the equipment.
Answer:
Maximum acceleration is 800m/s^2
Explanation:
See attached file
A horizontal uniform meter stick is supported at the 50.0 cm mark. It has a mass of 0.52 kg, hanging from it at the 20.0 cm mark and a mass of 0.31 kg mass hanging from the 60.0 cm mark. Determine the position on the meter stick, at which one would hang a third mass of 0.61 kg, to keep the meter stick in balance. Group of answer choices
Answer: 70.5 cm
Explanation:
The position on the meter stick, at which one would hang a third mass of 0.61 kg, to keep the meter stick in balance will be at the side of 0.31kg.
You will use the moment techniques.
That is,
Sum of the clockwise moment = sum of anticlockwise moments
Please find the attached file for the remaining explanation and solution.
A typical electric oven has two separate heating elements: one on top and one on the bottom. The bottom element is used for baking while the top element is used to broil foods. When only the bottom element is active and glowing red hot, what heat transfer mechanisms carry most of the heat to the food in the oven?
Answer:
Convection and Radiation mechanisms carry most of the heat
Explanation:
This is because Convection proceeds strongy as heated air rises from the hot element while Radiation is also strong, although the material of the cooking pots will how effective it is.
A 4g bullet, travelling at 589m/s embeds itself in a 2.3kg block of wood that is initially at rest, and together they travel at the same velocity. Calculate the percentage of the kinetic energy that is left in the system after collision to that before.
Answer:
The percentage of the kinetic energy that is left in the system after collision to that before is 0.174 %
Explanation:
Given;
mass of bullet, m₁ = 4g = 0.004kg
initial velocity of bullet, u₁ = 589 m/s
mass of block of wood, m₂ = 2.3 kg
initial velocity of the block of wood, u₂ = 0
let the final velocity of the system after collision = v
Apply the principle of conservation of linear momentum
m₁u₁ + m₂u₂ = v(m₁+m₂)
0.004(589) + 2.3(0) = v(0.004 + 2.3)
2.356 = 2.304v
v = 2.356 / 2.304
v = 1.0226 m/s
Initial kinetic energy of the system
K.E₁ = ¹/₂m₁u₁² + ¹/₂m₂u₂²
K.E₁ = ¹/₂(0.004)(589)² = 693.842 J
Final kinetic energy of the system
K.E₂ = ¹/₂v²(m₁ + m₂)
K.E₂ = ¹/₂ x 1.0226² x (0.004 + 2.3)
K.E₂ = 1.209 J
The kinetic energy left in the system = final kinetic energy of the system
The percentage of the kinetic energy that is left in the system after collision to that before = (K.E₂ / K.E₁) x 100%
= (1.209 / 693.842) x 100%
= 0.174 %
Therefore, the percentage of the kinetic energy that is left in the system after collision to that before is 0.174 %
"On a movie set, an alien spacecraft is to be lifted to a height of 32.0 m for use in a scene. The 260.0-kg spacecraft is attached by ropes to a massless pulley on a crane, and four members of the film's construction crew lift the prop at constant speed by delivering 135 W of power each. If 18.0% of the mechanical energy delivered to the pulley is lost to friction, what is the time interval required to lift the spacecraft to the specified height?"
Answer:
The time interval required to lift the spacecraft to this specified height is 123.94 seconds
Explanation:
Height through which the spacecraft is to be lifted = 32.0 m
Mass of the spacecraft = 260.0 kg
Four crew member each pull with a power of 135 W
18.0% of the mechanical energy is lost to friction.
work done in this situation is proportional to the mechanical energy used to move the spacecraft up
work done = (weight of spacecraft) x (the height through which it is lifted)
but the weight of spacecraft = mg
where m is the mass,
and g is acceleration due to gravity 9.81 m/s
weight of spacecraft = 260 x 9.81 = 2550.6 N
work done on the space craft = weight x height
==> work = 2550.6 x 32 = 81619.2 J
this is equal to the mechanical energy delivered to the system
18.0% of this mechanical energy delivered to the pulley is lost to friction.
this means that
0.18 x 81619.2 = 14691.456 J is lost to friction.
Total useful mechanical energy = 81619.2 J - 14691.456 J = 66927.74 J
Total power delivered by the crew to do this work = 135 x 4 = 540 W
But we know tat power is the rate at which work is done i.e
[tex]P = \frac{w}{t}[/tex]
where p is the power
where w is the useful work done
t is the time taken to do this work
imputing values, we'll have
540 = 66927.74/t
t = 66927.74/540
time taken t = 123.94 seconds
At what temperature will water begin to boil and turn to steam?
212 degrees Celsius
100 degrees Fahrenheit
212 kelvins
100 degrees Celsius
Answer:
100 degrees Celsius
Explanation:
Water starts to boil at 100 degrees celcius or 212 degrees fahrenheit.
At 100 degrees Celsius water begin to boil and turns to steam.
What are the boiling point and melting point of water?The melting point for water is 0 degrees C (32 degrees F). The boiling point of water varies with atmospheric pressure. At lower pressure or higher altitudes, the boiling point is lower. At sea level, pure water boils at 212 °F (100°C).
Is boiling water always 212?If the temperature is much above 212°F, the water will boil. That means that it won't just evaporate from the surface but will form vapor bubbles, which then grow, inside the liquid itself. If the water has very few dust flecks etc.
Learn more about a boiling point here https://brainly.com/question/40140
#SPJ2
An inductor is connected to a 18 kHz oscillator. The peak current is 70 mA when the rms voltage is 5.4 V What is the value of the inductance L
Answer:
The value of the inductance is 0.955 mH
Explanation:
Given;
frequency of the oscillator, f = 18 kHz = 18,000 Hz
the peak current, I₀ = 70 mA = 0.07 A
the root mean square voltage, [tex]V_{rms}[/tex] = 5.4 V
The root mean square current is given as;
[tex]I_{rms}= \frac{I_o}{\sqrt{2} }[/tex]
[tex]I_{rms} = \frac{0.07}{\sqrt{2} } \\\\I_{rms} = 0.05 \ A[/tex]
Inductive reactance is given by;
[tex]X_L =\frac{V_{rms}}{I_{rms}} \\\\X_L = \frac{5.4}{0.05} \\\\X_L = 108 \ ohms[/tex]
Inductance is given by;
[tex]L = \frac{X_L}{2\pi f} \\\\L = \frac{108}{2\pi *18,000} \\\\L = 9.55 *10^{-4} \ H[/tex]
L = 0.955 mH
Therefore, the value of the inductance is 0.955 mH
The value of the inductance (L) for this oscillating circuit is equal to [tex]9.55 \times 10^{-4}[/tex] Henry.
Given the following data:
Oscillator frequency = 18 kHzPeak current = 70 mARms Voltage = 5.4 VTo determine the value of the inductance (L):
First of all, we would find the root mean square (rms) current by using the formula:
[tex]I_{rms} = \frac{I_o}{\sqrt{2} }\\\\I_{rms} = \frac{70 \times 10^{-3}}{1.4142} \\\\I_{rms} = 0.050 \;A[/tex]
Next, we would calculate the inductive reactance of the oscillator by using the formula:
[tex]X_L = \frac{V_{rms}}{I_{rms}} \\\\X_L = \frac{5.4}{0.050} \\\\X_L = 108 \; Ohms[/tex]
Now, we can solve for the value of the inductance (L):
[tex]L = \frac{X_L}{2\pi f}[/tex]
Where:
L is the inductance.f is the frequency.[tex]X_L[/tex] is the inductive reactance.Substituting the parameters into the formula, we have;
[tex]L = \frac{108}{2 \times 3.142 \times 18 \times 10^3} \\\\L = \frac{108}{113112}[/tex]
L = [tex]9.55 \times 10^{-4}[/tex] Henry.
Read more: https://brainly.com/question/12530980
A typical home uses approximately 1600 kWh of energy per month. If the energy came from a nuclear reaction, what mass would have to be converted to energy per year to meet the energy needs of the home
Answer:
7.68×10^25kg
Explanation:
The formula for energy used per year is calculated as
Energy used per year =12 x Energy used per month
By substituting Energy used per month in the above formula, we get
Energy used per year =12 x 1600kWh
= 19200kWh
Conversion:
From kWh to J:
1 kWh=3.6 x 10^6 J
Therefore, it is converted to J as
19200 kWh =19200 x 3.6 x 10^6 J
= 6.912×10^10 J
Hence, energy used per year is 6.912×10^10 J
To find the mass that is converted to energy per year.
E = MC^2 ............1
E is the energy used per year
C is the speed of light = 3.0× 10^8m/s
Where E= 6.912×10^10 J
Substituting the values into equation 1
6.912×10^10 J = M × 3.0× 10^8m/s
M = 6.912×10^10 J / (3.0× 10^8m/s)^2
M = 6.912×10^10 J/9×10^16
M = 7.68×10^25kg
Hence the mass to be converted is
7.68×10^25kg
Calculate the power of the eye in D when viewing an object 5.70 m away. (Assume the lens-to-retina distance is 2.00 cm. Enter your answer to at least one decimal place.)
Answer:
Power=50.17dioptre
Power=50.17D
Explanation:
P=1/f = 1/d₀ + 1/d₁
Where d₀ = the eye's lens and the object distance= 5.70m=
d₁= the eye's lens and the image distance= 0.02m
f= focal length of the lense of the eye
We know that the object can be viewed clearly by the person ,then image and lens of the eye's distance needs to be equal with the retinal and the eye lens distance and this distance is given as 0.02m
Therefore, we can calculate the power using above formula
P= 1/5.70 + 1/0.02
Power=50.17dioptre
Therefore, the power the eye's is using to see the object from distance is 5.70D
A flywheel is a mechanical device used to store rotational kinetic energy for later use. Consider a flywheel in the form of a uniform solid cylinder rotating around its axis, with moment of inertia I = 1/2 mr2.
Part (a) If such a flywheel of radius r1 = 1.1 m and mass m1 = 11 kg can spin at a maximum speed of v = 35 m/s at its rim, calculate the maximum amount of energy, in joules, that this flywheel can store?
Part (b) Consider a scenario in which the flywheel described in part (a) (r1 = 1.1 m, mass m1 = 11 kg, v = 35 m/s at the rim) is spinning freely at its maximum speed, when a second flywheel of radius r2 = 2.8 m and mass m2 = 16 kg is coaxially dropped from rest onto it and sticks to it, so that they then rotate together as a single body. Calculate the energy, in joules, that is now stored in the wheel?
Part (c) Return now to the flywheel of part (a), with mass m1, radius r1, and speed v at its rim. Imagine the flywheel delivers one third of its stored kinetic energy to car, initially at rest, leaving it with a speed vcar.
Answer:
a) 6738.27 J
b) 61.908 J
c) [tex]\frac{4492.18}{v_{car} ^{2} }[/tex]
Explanation:
The complete question is
A flywheel is a mechanical device used to store rotational kinetic energy for later use. Consider a flywheel in the form of a uniform solid cylinder rotating around its axis, with moment of inertia I = 1/2 mr2.
Part (a) If such a flywheel of radius r1 = 1.1 m and mass m1 = 11 kg can spin at a maximum speed of v = 35 m/s at its rim, calculate the maximum amount of energy, in joules, that this flywheel can store?
Part (b) Consider a scenario in which the flywheel described in part (a) (r1 = 1.1 m, mass m1 = 11 kg, v = 35 m/s at the rim) is spinning freely at its maximum speed, when a second flywheel of radius r2 = 2.8 m and mass m2 = 16 kg is coaxially dropped from rest onto it and sticks to it, so that they then rotate together as a single body. Calculate the energy, in joules, that is now stored in the wheel?
Part (c) Return now to the flywheel of part (a), with mass m1, radius r1, and speed v at its rim. Imagine the flywheel delivers one third of its stored kinetic energy to car, initially at rest, leaving it with a speed vcar. Enter an expression for the mass of the car, in terms of the quantities defined here.
moment of inertia is given as
[tex]I[/tex] = [tex]\frac{1}{2}[/tex][tex]mr^{2}[/tex]
where m is the mass of the flywheel,
and r is the radius of the flywheel
for the flywheel with radius 1.1 m
and mass 11 kg
moment of inertia will be
[tex]I[/tex] = [tex]\frac{1}{2}[/tex][tex]*11*1.1^{2}[/tex] = 6.655 kg-m^2
The maximum speed of the flywheel = 35 m/s
we know that v = ωr
where v is the linear speed = 35 m/s
ω = angular speed
r = radius
therefore,
ω = v/r = 35/1.1 = 31.82 rad/s
maximum rotational energy of the flywheel will be
E = [tex]Iw^{2}[/tex] = 6.655 x [tex]31.82^{2}[/tex] = 6738.27 J
b) second flywheel has
radius = 2.8 m
mass = 16 kg
moment of inertia is
[tex]I[/tex] = [tex]\frac{1}{2}[/tex][tex]mr^{2}[/tex] = [tex]\frac{1}{2}[/tex][tex]*16*2.8^{2}[/tex] = 62.72 kg-m^2
According to conservation of angular momentum, the total initial angular momentum of the first flywheel, must be equal to the total final angular momentum of the combination two flywheels
for the first flywheel, rotational momentum = [tex]Iw[/tex] = 6.655 x 31.82 = 211.76 kg-m^2-rad/s
for their combination, the rotational momentum is
[tex](I_{1} +I_{2} )w[/tex]
where the subscripts 1 and 2 indicates the values first and second flywheels
[tex](I_{1} +I_{2} )w[/tex] = (6.655 + 62.72)ω
where ω here is their final angular momentum together
==> 69.375ω
Equating the two rotational momenta, we have
211.76 = 69.375ω
ω = 211.76/69.375 = 3.05 rad/s
Therefore, the energy stored in the first flywheel in this situation is
E = [tex]Iw^{2}[/tex] = 6.655 x [tex]3.05^{2}[/tex] = 61.908 J
c) one third of the initial energy of the flywheel is
6738.27/3 = 2246.09 J
For the car, the kinetic energy = [tex]\frac{1}{2}mv_{car} ^{2}[/tex]
where m is the mass of the car
[tex]v_{car}[/tex] is the velocity of the car
Equating the energy
2246.09 = [tex]\frac{1}{2}mv_{car} ^{2}[/tex]
making m the subject of the formula
mass of the car m = [tex]\frac{4492.18}{v_{car} ^{2} }[/tex]
Sally who weighs 450 N, stands on a skate board while roger pushes it forward 13.0 m at constant velocity on a level straight street. He applies a constant 100 N force.
Work done on the skateboard
a. Rodger Work= 0J
b. Rodger work= 1300J
c. sally work= 1300J
d. sally work= 5850J
e. rodger work= 5850J
Answer:
b. Rodger work = 1300 J
Explanation:
Work done: This can be defined as the product of force and distance along the direction of the force.
From the question,
Work is done by Rodger using a force of 100 N in pushing the skateboard through a distance of 13.0 m.
W = F×d............. Equation 1
Where W = work done, F = force, d = distance.
Given: F = 100 N, d = 13 m
Substitute these values into equation 1
W = 100(13)
W = 1300 J.
Hence the right option is b. Rodger work = 1300 J
A solenoid used to produce magnetic fields for research purposes is 2.2 mm long, with an inner radius of 30 cmcm and 1200 turns of wire. When running, the solenoid produced a field of 1.4 TT in the center. Given this, how large a current does it carry?
Answer:
The current is [tex]I = 2042\ A[/tex]
Explanation:
From the question we are told that
The length of the solenoid is [tex]l = 2.2 \ m[/tex]
The radius is [tex]r_i = 30 \ cm = 0.30 \ m[/tex]
The number of turn is [tex]N = 1200 \ turns[/tex]
The magnetic field is [tex]B = 1.4 \ T[/tex]
The magnetic field produced is mathematically represented as
[tex]B = \frac{\mu_o * N * I }{l }[/tex]
making [tex]I[/tex] the subject
[tex]I = \frac{B * l}{\mu_o * N }[/tex]
Where [tex]\mu_o[/tex] is the permeability of free space with values [tex]\mu_o = 4\pi *10^{-7} N/A^2[/tex]
substituting values
[tex]I = \frac{1.4 * 2.2 }{4\pi *10^{-7} * 1200 }[/tex]
[tex]I = 2042\ A[/tex]
What is the wavelength λλlambda of the wave described in the problem introduction? Express the wavelength in terms of the other given variables and constants
Complete Question
The complete question is shown on the first uploaded image
Answer:
The wavelength is [tex]\lambda= \frac{2 \pi }{k}[/tex]
Explanation:
From the question we are told that
The electric field is [tex]\= E = E_o sin (kx - wt )\r j[/tex]
The magnetic field is [tex]\= B = B_0 sin (kx -wt) \r k[/tex]
From the above equation
and k is the wave number which is mathematically represented as
[tex]k = \frac{2 \pi }{\lambda }[/tex]
=> [tex]\lambda= \frac{2 \pi }{k}[/tex]
Where [tex]\lambda[/tex] is the wavelength
(a) Find the speed of waves on a violin string of mass 717 mg and length 24.3 cm if the fundamental frequency is 980 Hz. (b) What is the tension in the string? For the fundamental, what is the wavelength of (c) the waves on the string and (d) the sound waves emitted by the string? (Take the speed of sound in air to be 343 m/s.)
Answer:
a)v = 476.28 m / s , b) T = 6.69 10⁵ N , c) λ = 0.486 m , d) λ = 0.35 m
Explanation:
a) The speed of a wave on a string is
v = √T /μ
also all the waves fulfill the relationship
v = λ f
they indicate that the fundamental frequency is f = 980 Hz.
The wavelength that is fixed at its ends and has a maximum in the center
L = λ / 2
λ = 2L
we substitute
v = 2 L f
let's calculate
v = 2 0.243 980
v = 476.28 m / s
b) The tension of the rope
T = v² μ
the density of the string is
μ = m / L
T = v² m / L
T = 476.28² 0.717 / 0.243
T = 6.69 10⁵ N
c) λ = 2L
λ = 2 0.243
λ = 0.486 m
d) The violin has a resonance process with the air therefore the frequency of the wave in the air is the same as the wave in the string. Let's find the wavelength in the air
v = λ f
λ= v / f
λ = 343/980
λ = 0.35 m