Answer:
2
Explanation:
50 times 2
Water boils at 100°C and turns into steam. Which similarities or differences are there between water in these two states? (1 point)
The particles will have more space between them and will be moving at higher speeds as steam.
The particles will have more space between them as steam, but they will be moving at the same speed in both states.
The particles will have more space between them as a liquid, but they will be moving at the same speed in both states.
The particles will have more space between them as a liquid, but they will be moving faster as steam.
Answer:
My answer was A not sure if its correct as i am still doing the rest of the questions.
Explanation:
The particles will have more space between them and will be moving at higher speeds as steam compare to water.
What is latent heat ?The quantity of heat (in joules or calories) per mole or unit mass of the substance undergoing a change in state is the typical way to represent latent heat.
The latent heat involved in melting solids or freezing liquids is referred to as the "heat of fusion," while the latent heat involved in vaporizing solids or liquids or condensing vapor is referred to as the "heat of vaporization."
When water boils at 100°C and turns into steam, water vaporizes into steam by absorbing heat of vaporization. This heat energy remains in the steam as kinetic energy and makes their movement fast.
So, The molecules will have more space between them and will be moving at higher speeds as steam compare to water.
Learn more about latent heat here:
https://brainly.com/question/13428994
#SPJ2
PLEASE HELP. I'LL GIVE BRAINLIEST TO CORRECT ANSWER.
There are several ways to model a compound. One type of model is shown.
4 C's are connected in a line by 3 black lines. The C on the left has 3 H's attached to it each by a black line. The next C has 1 H attached by a black line and 1 O attached by 2 black lines. The next C has 2 H's attached to it by 1 black line each. The last C has 2 H's attached to it by 1 black line each and 1 O attached by a single black line. That O has an H attached to it by 1 black line.
What is the chemical formula for the molecule represented by the model?
CHO
C4H9O2
C4H8O
C3H8O2
Answer:
C
Explanation:
Edge2020
1. A particular lever is 90.0% efficient. If 50.0 J of work are done on the lever, then how much work does the lever do on its load? 2.The mechanical advantage of a pulley system is 4.00. Using this pulley system, how much force do you need to exert to lift a 500.0 N box?
Answer:
Explanation:
Using the efficiency formula;
Efficiency = Work done by the machine (output)/work done on the machine (input) ×100%
Efficiency =w/50 ×100
90 = 100w/50
Cross multiply
90×50 = 100W
4500 = 100W
W = 4500/100
W = 45Joules
Hence the lever does 45Joules of work on its load
2) Mechanical Advantage= Load/Effort
Given
MA = 4
Load = 500N
4 = 500/Effort
Effort = 500/4
Effort =125N
Hence the effort required to lift the load is 125N
1. The work done by the lever on its load is 45 J
2. The force needed to exert to lift the load is 125 N.
1. Determination of the work done by the lever on the load.
Work Input = 50 J
Efficiency = 90%
Work Output =?[tex]efficiency \: = \frac{work \: output}{work \: input} \times 100 \\ \\ 90\% = \frac{work \: output}{50} \\ \\ cross \: multiply \\ \\ work \: output \: = 90\% \: \times 50 \\ \\ work \: output = 0.9 \: \times 50[/tex]
Work Output = 45 JTherefore, the work done by the lever on the load is 45 J
2. Determination of the force needed to lift the load
Mechanical advantage (MA) = 4
Load (L) = 500 N
Effort (E) = ?[tex]mechanical \: advantage \: = \frac{load}{effot} \\ \\ 4 \: = \frac{500}{effort} \\ \\ cross \: multiply \\ \\ 4 \: \times effort \: = 500 \\ \\ divide \: both \: side \: by \: 4 \\ \\ effort \: = \frac{500}{4} \\ [/tex]
Effort = 125 NTherefore, the force needed to lift the load is 125 N
Learn more: https://brainly.com/question/17070019
PLEAASSEEEE HELLLPPP !
Answer: It moves in the direction of Fb at a constant rate of speed, because the same amount of force is being added the whole time.
Explanation:
A tablecloth can be pulled out from underneath a fully set table without breaking plates or glassware. The reason is that the objects follow Newton's:
Answer:
newtons law of force
newtons law of force explains that something may or can or canot move depending on the objexts mass.
What’s the kinetic energy of the object? Use .
Erica is competing in the shot put event at a track meet. She hurls a shot with a mass of 4 kilograms at a speed of 9 meters/second. The shot’s kinetic energy is
joules.
Answer:
18joules
Explanation:
1/2 of 4=2
2 multiply by 9= 18 joules
1 kg sample of aluminium is stored in a laboratory. In a different laboratory, in the same town,
there is a 1 kg sample of iron.
Which quantity must these two samples always have in common?
Same density
Same temperature
Same volume
Same weight
Plz explain
Answer:
same weight
Explanation:
because same
GIVING BRAINLY, FOLLOW AND STARS, HELP!
When a solid object absorbs infrared rays, what happens to the particles
in that object?
Answer:
All objects emit and absorb infrared radiation. The hotter an object is the more energy it radiates per second. Infrared radiation can travel through a vacuum. When infrared radiation hits an object some of the energy is absorbed, making the objects temperature increase, and some is reflected.
Explanation:
I WILL GIVE BRAINLIEST!!!!
The image above shows two opposite forces acting on a rope, what can we say is true about the affect of the forces on the rope?
GIVING BRAINLIEST TO THE RIGHT ANSWER examine the information for the two samples described in the chart. How are zinc and sodium alike?
A. They have the same hardness at room temperature.
B. They are both dolids at room temperature.
C. They have the same color.
D. They have the same boiling point.
Heat moves from hot to cold either through air or liquid
Answer:
both
Explanation:
because when it is hot in summer 5hat is the air and the sund u can warm things up and then it get hot
What is the speed of a car that travels 400 m in 20
minutes?
Answer:
3.33 m/s
Explanation:
time = 20 minutes = 20 x 60 = 120 seconds
distance = 400m
speed = distance/time
= 400/120
= 40/12
= 10/3
= 3.33m/s
If the magnification of the image is NEGATIVE, the image is ( choose two .25
* answers)
virtual
real
inverted
reduced
Answer:
C. Inverted
Explanation:
When a negative magnification is obtained, it means that the image is inverted. When an object is placed far away from a converging lens than the focal length, the image is formed on the opposite side of the lens. In this case, a screen is introduced at image position for viewing. The image is focused up-side down. It is real and inverted.
You leave Chicago, Illinois at 8am and fly to Portland, Oregon. Your flight takes 2.5 hours. What time do you arrive in Portland?
Answer:
10:30am ........................
Answer:
maybe around 10:30 I would say
What does the xylem do?
A .stores the glucose
B captures the sunlight
C absorbs oxygen into the leaf
D carries water from the roots to the leaves
Answer:
D carries water from the roots to the leaves.
is the answer.
Explanation:
Xylem is the specialised tissue of vascular plants that transports water and nutrients from the plant–soil interface to stems and leaves, and provides mechanical support and storage.
Answer:
D carries water from the roots to the leaves
Explanation:
have a nice day
Mars has two moons. What does the orbital speed of these moons depend on?
Answer:
their masses and their distances from Mars
Explanation:
Hope this helped
Also can u pls mark me brainliest
Explain how to identify a starting position on a line.
Answer: You can easily find out the beginning point of the line by using dot representation. When it comes to position vector, it expresses the exact position of certain object from the starting point of the coordinate system. The vector is a straight line that has a certain end which is fixed to its body.
brainliest please :)
Answer:
We can easily find out the beginning point of the line by using dot representation. When it comes to the position vector, it expresses the exact position of a certain object from the starting point of the coordinate system. The vector is a straight line that has a certain end that is fixed to its body.
What are the different forms of treatments available for somatoform disorders?
Answer:
Treatment options include medications, particularly tricyclic antidepressants and SSRIs,21,22 and psychotherapy. Nonpharmacologic treatment strategies (e.g., massage, acupuncture) may also be beneficial. patients initially presented with symptomatic pain due to a shoulder injury.
Somatoform disorders can be treated by psychotherapy and through medications.
What are somatoform disorders?Somatoform disorders are a group of psychiatric disorders whereby patients have a wide variety of clinically significant but unexplained physical symptoms.
The treatment options for somatoform disorders include:
PsychotherapyMedications Yoga and meditationAcupunctureTherefore, somatoform disorders can be treated by psychotherapy and through medications.
Learn more about somatoform disorders at: https://brainly.com/question/27251201
#SPJ2
A crate weighing 523 N rests on a plank that makes a 22.0 angle with the ground. Find the components of the crate's weight force parallel and perpendicular to the plank. ( Fgx = –196 N, Fgy = –485 N)
Answer:
Explanation:
The weight of the crate will e equal to its normal reaction R
Since R = mgsin theta = W
W = mgsintheta ( resolved along the vertical perpendicular to the plank
Fy = 523sin22°
Fy = 195.92N
Since the weight is acting along the negative y direction,
Fy = -195.92N
The force parallel to the plank will be the force acting in the horizontal direction.
Fx = Fcos theta
Fx = 523cos 22°
Fx = 484.9N
Once a person passes the age of 65, he or she should stop exercising.
Please select the best answer from the choices provided.
ОТ
OF
Answer: False
People age 65 and older still need exercise. Although the intensity of each workout won't be as high compared to younger ages. Everyone needs exercise to keep their heart healthy, to lower the bad cholesterol, etc.
Answer:
no
Explanation:
very false
Which shows the correct angle of reflection given the incident ray shown?
[tex]\mathfrak{\huge{\pink{\underline{\underline{AnSwEr:-}}}}}[/tex]
Actually Welcome to the Concept of the Rays of light.
Since we know that, The light ray on a shiny surface makes a angle with the normal, hence The Angle of incidence is equal to angle of reflection made with Normal Axis in the middle.
Thus Option c.) is correct.
C.) is the Answer.
The angle of reflection given the incident ray from the given diagrams is option C.
What is the refraction of light?When a light ray strikes the shining surfaces, the part of the light gets refracted. The bouncing back of the light is called reflection. When the light strikes the surface is called an incident ray.
When the light ray incident on the surface, the light returns back to the same medium is called reflection. The laws of reflection are, the angle of incidence is equal to the angle of reflection, and the incident ray, reflected ray, and normal takes place in the same plane. The speed of light remains the same in the process of reflection.
The reflected light ray changes the path of direction in the same medium. When a light ray enters from one medium to another, the speed of light gets decreases.
Thus, the ideal solution is option C.
To learn more about reflection:
https://brainly.com/question/28969632
#SPJ2
A bus makes a 10-kilometer journey through town. It's top speed is 50 km/h and it's mean speed is 16kn/h. Explain why these speeds are different.
Somebody pls help me with this question!
Answer:
speed are different at different places
Explanation:
because it's top speed is 50km/h,so it's initial speed may be less. when it covers some distance it's speed changes again. then we have given a mean speed .mean speed means sum of all speed divided by sum of total time.so the mean speed and final speed differs from each other
While a dog runs forward, its
owner pulls back with a 22.4 N
force at a 115º direction, doing
-42.3 J of work. How far did the
dog move?
(Unit = m)
HELP ME
Answer:
d = 4.47 [m]
Explanation:
To solve this problem we must make a free body diagram, where we can see the direction of the force acting with the appropriate angles. In the attached image we can see the free body diagram mentioned.
So in the image, we can see an angle of 65° with respect to the horizontal, therefore we can calculate the horizontal component of the force.
Fx = 22.4*cos (65)
Fx = - 9.46 [N] (it's negative because the force is pointing in the negative direction).
We can obtain the same result using 115° as the angle.
Fx = 22.4*cos (115)
Fx = 9.46 [N]
Now we know that work is defined as the product of the force by the distance, therefore we have.
Note: Always the work must be calculated with the force parallel
to the movement
W = F*d
Where:
W = work = 42.3 [J] (units of joules)
F = force parallel to the movement = 9.46 [N]
d = distance [m]
d = W/F
d = 42.3/9.46
d = 4.47 [m]
Answer:
Explanation:
the person on top of me is right it’s 4.47
Click to review the online content. Then answer the question(s) below, using complete sentences. Scroll down to view additional questions. Free Weights and Machines What are some things to consider when deciding to use free weights or machine weights?
Machine weights are safer when used correctly, but free weights can be dropped and cause injury. These are safety considerations to keep in mind whether using free weights or machine weights. But because they aren't big, complicated machinery, free weights are less expensive.
What are free weights or machine weights?Resistance machines and free weights are very different from one another in terms of how they work and the results they can create.
Machines are set in place and can only move in a few directions, whereas free weights can be moved in whatever direction the user selects. This is the main distinction between machines and free weights. Free weights require you to utilize more stabilizing muscles to control them, whereas resistance machines help you by stabilizing you while you move.
Learn more about free weights here:
https://brainly.com/question/21991373
#SPJ2
A girl throws a pebble into a deep well at 4.0 m/s (downward). It hits the
water in 2.0 s.
a. How far below the ground is the water's surface?
b. What is the pebble's average velocity?
give any five difference between of solar system and constellation
Answer:
constellation is just a name for a set of stars that are perceived, from an earth viewpoint, to make a form in tge night sky…. the Plough, the Great Bear, for example. A galaxy is a formation of stars that are revolving around a centre, our own solar system lies in the outer edge of the galaxy known as the Milky Way.
Explanation:
what allows for movement
Choose the correct answer:
-excretory
-immune/hymophatic
-integumentary
-muscular
Is better to run or walk when it is raining?
Answer:
run
Explanation:
run - less wet
walking - more wet
3. As the ice melts into liquid water, what happens to the kinetic energy of the particles in the sample?
4. How does the kinetic energy of the particles in the sample relate to the sample’s temperature?
Answer:
As ice melts into water, kinetic energy is being added to the particles. This causes them to be 'excited' and they break the bonds that hold them together as a solid, resulting in a change of state: solid -> liquid.
Explanation:
As the ice melts into liquid water, the kinetic energy of the particles in the sample increase. The temperature of the sample is directly proportional to the kinetic energy of the particle.
What is Kinetic energy?The kinetic energy of an object is the energy which it possesses due to the motion of the object. Kinetic energy is defined as the work which is needed to accelerate a body of a given mass from the rest position to its stated velocity. The body of an object maintains the same amount of kinetic energy which it gained during its acceleration unless its speed changes.
The temperature is directly proportional to the kinetic energy of the object. As the temperature of the object increases the phase of the object changes from solid to liquid.
Learn more about Kinetic energy here:
https://brainly.com/question/26472013
#SPJ6
Car 1 of mass m1 is waiting at a traffic light.
Car 1 is struck from behind by Car 2 of mass m2.
The two cars stick together after the collision.
Car 2 was traveling at v2i = 30.0 m/s before the collision.
What is the initial kinetic energy, in [J], of car 1, if m1= 2500kg?
Answer: KE= 1/2 m v^2
KE= 1/2 2500 (0)^2
KE= 0
Explanation: since initial velocity is 0, the KE is 0.
The initial kinetic energy, in [J], of car 1 is 0.
KE= 1/2 m v^2
KE= 1/2 2500 (0)^2
KE= 0
What is kinetic energy?Kinetic energy is a form of energy that an object or a particle has by means of reason of its movement. If paintings, which transfer strength, are carried out on an object via making use of an internet pressure, the object hastens and thereby gains kinetic energy.
What's the initial and very last kinetic strength?The kinetic strength of an object depends on its velocity. To trade its pace, one must exert pressure on it. It turns out there's a connection between the pressure one applies to an object and the resulting change in its kinetic electricity: KE(very last) - KE(initial) = (force) (distance)
Learn more about kinetic energy here: https://brainly.com/question/25959744
#SPJ2