An arrow is shot vertically up into the air with an initial vertical velocity of 70 m/s. Its height is given by h= -5t^2+70t, where h is in meters and t is in seconds. How high does the arrow go? How long does the arrow stay in flight?

For the absolute value formula, the David's claim about absolute value equation is not supported by provided each set of values for x and y .

The absolute value is always defined as a positive value (not a negative value). So, the absolute value equation can be written as |x| = x. For example, the absolute value of -5 and 5 is the same i.e. 5. We have David's claims that If the absolute value of x is greater than the absolute value of y, then x is greater than y. We have to check the set of values follow the claim or not.

a) x= -15, y = 14

The absolute value of x, |x| = |-15| = 15

The absolute value of y, |y| = |-14| = 14 < 15

=> [tex] |x| > | y|[/tex] but [tex] y> x [/tex].

So, it does not follow the claim.

b) x = -0. 9 , y = -0. 8

The absolute value of x, |x| = |-0.9| = 0.9

The absolute value of y, |y| = |-0.8|

= 0.8< 0.9

=> [tex] |x| > |y|[/tex] but [tex] y > x [/tex].

So, it does not follows the claim.

c) x= -1/2, y = 1/3

The absolute value of x, |x| =

[tex] |\frac{ - 1}{2}|= \frac{1}{2} [/tex]

The absolute value of y, |y| = [tex] | \frac{1}{3} |= \frac{1}{3}< \frac{1}{2} [/tex]

=> [tex] |x| > | y| [/tex] but [tex] y > x [/tex].

So, it does not follow the claim. Hence, no one set of the values follow the claim.

For more information about absolute value, visit :

https://brainly.com/question/12928519

#SPJ4

To find the mean annual amount of snowfall accumulated in the lake, we need to use the information given: the gamma distribution has a shape parameter (α) of 10 and a scale parameter (β) of 2.

The mean of a gamma distribution can be calculated using the formula:

Mean = α * β

In this case, α = 10 and β = 2. Plugging these values into the formula:

Mean = 10 * 2 = 20

So, the mean annual amount of snowfall accumulated in the lake is 20 megatons.

To know more about annual amount visit :

https://brainly.com/question/14306554

#SPJ11

The statement that correctly describes whether or not the quadrilateral is a parallelogram based upon the measurements given is this: A. The quadrilateral is a parallelogram because opposite angles are congruent.

A parallelogram is a four-sided representation that has two pairs of equal sides and two pairs of equal angles. The easy way to identify parallelograms is by the congruency they feature.

So, we qualify the quadrilateral as a parallelogram because the parallel angles are congruent.

Learn more about parallelograms here:

https://brainly.com/question/970600

#SPJ1

We are 90% confident that the true difference between the mean strengths of the two types lies between 0.015 and 0.105. The data does not show at the 0.05 level that the mean strengths are different, with a p-value of approximately 0.055. Therefore, we fail to reject the null hypothesis that the means are equal.

To find a 90% confidence interval for the difference in the mean strengths of the two types, we can use the two-sample t-test with pooled variance. The formula for the confidence interval is:

[tex]$(\bar{x}_1 - \bar{x}2) \pm t{\alpha/2,\nu} \cdot s_p \cdot \sqrt{\frac{1}{n_1}+\frac{1}{n_2}}$[/tex]

Plugging in the given values, we get:

[tex]\bar{x}1 = 3.18, \bar{x}2 = 3.24, n_1 = 5, n_2 = 7, s_p = \sqrt{\frac{ (n_1 - 1)s_1^2 + (n_2 - 1)s_2^2 }{ df }} = \sqrt{\frac{ (40.042^2 + 60.048^2) }{ 10 }} = 0.046, t{\alpha/2,\nu} = t{0.05/2,10} = 2.306$[/tex]

Therefore, the 90% confidence interval for the difference between the mean strengths of the two types is:

[tex]$(3.24 - 3.18) \pm 2.306 \cdot 0.046 \cdot \sqrt{\frac{1}{5}+\frac{1}{7}} = 0.06 \pm 0.045$[/tex]

So the interval is (0.015, 0.105).

Thus, we are 90% confident that the true difference between the mean strengths of the two types lies between 0.015 and 0.105.

To test whether the mean strengths are different, we can use a two-tailed hypothesis test with a significance level of 0.05. The null hypothesis is that the means are equal, while the alternative hypothesis is that they are different. We can calculate the t-value as:

[tex]$t = \frac{\bar{x}_1 - \bar{x}_2}{s_p \cdot \sqrt{\frac{1}{n_1}+\frac{1}{n_2}}} = \frac{3.18-3.24}{0.046 \cdot \sqrt{\frac{1}{5}+\frac{1}{7}}} = -2.13$[/tex]

The degrees of freedom are the same as before, [tex]$df = n_1 + n_2 - 2 = 10$[/tex]

The p-value is the probability of getting a t-value at least as extreme as the observed one, assuming the null hypothesis is true. From a t-distribution table, we can find that the p-value for t = -2.13 with df = 10 is approximately 0.055. Since this is greater than the significance level of 0.05, we fail to reject the null hypothesis.

To learn more about null hypothesis

https://brainly.com/question/28920252

#SPJ4

The wind speed is 37.5 miles per hour.

We are given that;

Number of files= 750

Time=2.5 hours

Now,

Let p be the plane’s rate of speed and w be the wind speed. Then, when the plane flies against the wind, its rate is p - w. When the plane flies with the wind, its rate is p + w.

Using the formula d = rt, we can write two equations for the two trips. For the trip from Chicago to New York, we have 750 = (p - w) * 2.5. For the trip from New York to Chicago, we have 750 = (p + w) * 2.

Simplifying the equations, we get 300 = p - w and 375 = p + w.

Adding the two equations, we get 675 = 2p. Solving for p, we get p = 337.5. This means that the plane’s rate of speed is 337.5 miles per hour.

Substituting p = 337.5 into one of the equations, we get 300 = 337.5 - w. Solving for w, we get w = 37.5.

Therefore, by speed the answer will be 7.5 miles per hour.

Learn more about speed here;

brainly.com/question/7359669

#SPJ1

A car engine has an efficiency of about 30% is a true statement.

the  factual  effectiveness of a auto machine can vary grounded on  colorful factors  similar as machine size, type, and design, as well as driving conditions and  conservation.   The  effectiveness of an machine is a measure of how  important of the energy produced by the energy is converted into useful work,  similar as turning the  bus of a auto.

In an ideal situation, an machine would convert all the energy from the energy into useful work. still, due to  colorful factors  similar as  disunion and heat loss, this isn't possible.   The  effectiveness of a auto machine is  generally calculated by dividing the  quantum of energy produced by the energy by the  quantum of energy used by the machine. This is known as the boscage  thermal  effectiveness( BTE) of the machine.

Learn more about efficiency at

https://brainly.com/question/28104222

#SPJ1

The probability that a randomly selected board cut by the machine has a length greater than 96.25 inches is approximately 0.3085 or 30.85%.

Probability is a way to gauge how likely something is to happen. Many things are difficult to forecast with absolute confidence.

We can use the z-score formula to find the probability that a randomly selected board cut by the machine has a length greater than 96.25 inches:

z = (x - μ) / σ

where x is the length of the board, μ is the mean length, and σ is the standard deviation.

Substituting the values given in the problem, we have:

z = (96.25 - 96) / 0.5 = 0.5

To find the probability that a randomly selected board has a length greater than 96.25 inches, we need to find the area under the standard normal distribution curve to the right of z = 0.5. We can use a standard normal distribution table or calculator to find this area, which is:

P(Z > 0.5) = 0.3085

Therefore, the probability that a randomly selected board cut by the machine has a length greater than 96.25 inches is approximately 0.3085 or 30.85%.

Learn more about probability on:

https://brainly.com/question/13604758

#SPJ4

Answer:

the point of intersection is (2.6667, 7).

Step-by-step explanation:

The equation for a circle with center (h,k) and radius r is:

(x - h)^2 + (y - k)^2 = r^2

So the equation for the circle with radius 4 and center (0, 4) is:

x^2 + (y - 4)^2 = 16

The line with equation y = 1.5x + 4 intersects the circle when the x and y values satisfy both equations. Substituting y = 1.5x + 4 into the equation for the circle, we get:

x^2 + (1.5x + 4 - 4)^2 = 16

Simplifying and solving for x, we get:

x^2 + (1.5x)^2 = 16

2.25x^2 = 16

x^2 = 16/2.25

x = ±2.6667

Since we are looking for the point in the first quadrant, we take the positive value of x. Substituting x = 2.6667 into the equation for the line, we get:

y = 1.5(2.6667) + 4

y = 7

Therefore, the point of intersection is (2.6667, 7).

Abdul had 9 green beads and 12 yellow beads in his bag originally and after giving one green bead to his sister he had 4 yellow beads remaining.

Let's say the total number of beads in Abdul's bag is "x" and the number of green beads is "g".

We know that 3/7 of the beads are green, so:

g = 3/7 × x

Abdul gives a green bead to his sister 2/5 of the remaining beads are green.

This means that 3/5 of the remaining beads are yellow.

So, we can write:

(g - 1) / (3/5) = y / 2/5

Where "y" is the number of remaining yellow beads.

We can simplify this equation by cross-multiplying:

5(g - 1) = 6y

Expanding and simplifying:

5g - 5 = 6y

5g = 6y + 5

Now we can substitute the first equation (g = 3/7 × x) into this equation:

5(3/7 × x) = 6y + 5

Multiplying both sides by 7 to eliminate the fraction:

15x = 42y + 35

We can rearrange this equation to solve for "y":

y = (15x - 35) / 42

To find values of "x" and "y" that are both integers and satisfy the conditions of the problem.

We know that both "x" and "y" have to be greater than or equal to 1 since Abdul must have at least one bead of each color in his bag.

One possible solution is:

x = 21 (so there are 21 beads in the bag)

g = 9 (since 3/7 of 21 is 9)

y = 4 (since (15×21 - 35) / 42 = 4)

For similar questions on beads

https://brainly.com/question/27029098

#SPJ11

For a prime p ≡ 1 (mod 4), the quadratic residue of -1 in the finite field [tex]$\mathbb{F}_p$[/tex] exists, i.e., -1 is a square in[tex]$\mathbb{F}_p$[/tex].

Let p be a prime such that p ≡ 1 (mod 4). We need to prove that -1 is a quadratic residue modulo p, i.e., there exists an integer a such that [tex]$a^2 \equiv -1 \pmod p$.[/tex]

We know that the Legendre symbol $\left(\frac{-1}{p}\right)$ is equal to 1 if p ≡ 1 (mod 4), and -1 if p ≡ 3 (mod 4). Since p ≡ 1 (mod 4), we have [tex]$\left(\frac{-1}{p}\right) = 1$.[/tex]

By Euler's criterion, we have

[tex]$\left(\frac{-1}{p}\right) \equiv (-1)^{\frac{p-1}{2}} \pmod p$.[/tex]

Since [tex]$\left(\frac{-1}{p}\right) = 1$[/tex],

we have [tex]$(-1)^{\frac{p-1}{2}} \equiv 1 \pmod p$.[/tex]

This implies that  [tex]$\frac{p-1}{2}$ is even, i.e., $p \equiv 1 \pmod 8$.[/tex]

Now, let's consider the field [tex]$\mathbb{F}_p$,[/tex]

which is a finite field of order p. Since p ≡ 1 (mod 4), we have[tex]$p = 4k+1$[/tex] for some integer k. Let's define a subgroup of order 4 in [tex]$\mathbb{F}_p^{\times}$ as $H = {1,-1,i,-i}$, where $i^2 \equiv -1 \pmod p$.[/tex]

Since H is a subgroup of [tex]$\mathbb{F}_p^{\times}$[/tex]  of order 4, any element of [tex]$\mathbb{F}_p^{\times}$[/tex] can be written as a power of i multiplied by a power of -1. That is, for any[tex]$x \in \mathbb{F}_p^{\times}$[/tex], there exist integers m and n such that [tex]$x = i^m(-1)^n$.[/tex]

Since $p \equiv 1 \pmod 8$, we have [tex]$2^{(p-1)/2} \equiv 1 \pmod p$[/tex]  by Euler's criterion. This implies that [tex]$i^{p-1} = (i^2)^{(p-1)/2} \equiv 1 \pmod p$[/tex]. Thus, [tex]$i^p \equiv i \pmod p$.[/tex]

Now, consider the element [tex]$(-i)^2 = i^2(-1)^2 = -1$[/tex]. This shows that -1 is a quadratic residue modulo p, i.e., there exists an integer a such that [tex]$a^2 \equiv -1 \pmod p$[/tex]. Therefore, we have proved that −1 is a square in [tex]$\mathbb{F}_p$.[/tex]

Learn more about Euler's criterion

brainly.com/question/28988430

#SPJ11

Based on Mickey's work QUAD is a square, because opposite sides are parallel and all the sides are equal.

From the given workout, QU=√5, UA=√5, AD=√5 DQ=√5

Here, slope of QU = 2, slope of UA=-1/2, slope of AD=2 and slope of PQ = -1/2

So, opposite sides are parallel because they have same slope.

Hence, based on Mickey's work QUAD is a square, because opposite sides are parallel and all the sides are equal.

Learn more about the quadrilaterals here:

https://brainly.com/question/29934440.

#SPJ1

[tex]\textit{circumference of a circle}\\\\ C=\pi d ~~ \begin{cases} d=diameter\\[-0.5em] \hrulefill\\ C=76.18 \end{cases}\implies 76.18=\pi d\implies \cfrac{76.18}{\pi }=d\implies 24.25\approx d[/tex]

GTT's expected market share is 45.45%, NCJ's expected market share is 31.82%, and Dash's expected market share is 22.73%. these percentages add up to 100%, as expected.

To find the long-run expected market share for each company, we need to use the concept of steady-state or equilibrium. In the long run, the market share of each company will remain constant if the number of customers gained is equal to the number of customers lost. This means that the rate of change of each company's market share will be zero.

Let's define the market share of each company at any point in time as follows:

GTT's market share = SGTT

NCJ's market share = SNCJ

Dash's market share = SDash

We can write the equations for the rate of change of each company's market share as follows:

dSGTT/dt = -0.2 SGTT + 0.05 SNCJ + 0.25 SDash

dSNCJ/dt = -0.05 SNCJ + 0.05 SGTT + 0.15 SDash

dSDash/dt = -0.15 SDash + 0.25 SGTT + 0.15 SNCJ

Note that the negative coefficients represent the percentage of customers lost by the company, and the positive coefficients represent the percentage of customers gained by the company.

To find the steady-state values of SGTT, SNCJ, and SDash, we need to set the rate of change of each company's market share to zero:

-0.2 SGTT + 0.05 SNCJ + 0.25 SDash = 0

-0.05 SNCJ + 0.05 SGTT + 0.15 SDash = 0

-0.15 SDash + 0.25 SGTT + 0.15 SNCJ = 0

We can solve these equations to get the steady-state values of SGTT, SNCJ, and SDash:

SGTT = 0.4545

SNCJ = 0.3182

SDash = 0.2273

Therefore, the expected long-run market share for each company is as follows:

GTT's expected market share: 45.45%

NCJ's expected market share: 31.82%

Dash's expected market share: 22.73%

Therefore, these percentages add up to 100%, as expected.

for such more question on equilibrium

https://brainly.com/question/29398344

#SPJ11

To convert centimeters to meters, you need to divide by 100 since there are 100 centimeters in one meter.

Thus, to convert 150 cm to meters, you would divide by 100:

150 cm ÷ 100 = 1.5 m

Therefore, the length of Priscilla's desk is 1.50 meters. Answer: 1.50 meters.

Answer: 1.5 meters

Step-by-step explanation:

The lower and upper limits of the confidence interval can be determined using the sample mean and sample standard deviation.

Given the sample readings of total calcium levels in mg/dl, we can calculate the sample mean (x) and sample standard deviation (s). Using these values, we can determine the lower and upper limits of the 99.9% confidence interval.

Calculating the sample mean:

x = (9.9 + 8.6 + 10.9 + 8.5 + 9.4 + 9.8 + 10.0 + 9.9 + 11.2 + 12.1) / 10 = 10.03 mg/dl

Calculating the sample standard deviation:

s = sqrt(((9.9 - 10.03)^2 + (8.6 - 10.03)^2 + ... + (12.1 - 10.03)^2) / (10 - 1)) = 1.16 mg/dl

To determine the 99.9%   confidence interval, we need to find the critical value corresponding to this level of confidence. Since the sample size is small (less than 30) and the population standard deviation is unknown, we can use the t-distribution. With a sample size of 10 and a desired confidence level of 99.9%, the critical value is approximately 3.250.

Calculating the margin of error:

Margin of error = critical value * (s / sqrt(n))

= 3.250 * (1.16 / sqrt(10))

≈ 1.19

The lower limit of the confidence interval is given by x - margin of error:

Lower limit = 10.03 - 1.19 ≈ 8.84 mg/dl

The upper limit of the confidence interval is given by x + margin of error:

Upper limit = 10.03 + 1.19 ≈ 11.22 mg/dl

Therefore, the 99.9% confidence interval for the population mean of total calcium in this patient's blood is approximately 8.84 mg/dl to 11.22 mg/dl.

Learn more about distribution here : brainly.com/question/29664127

#SPJ11

There are 4 lucky dates were there in 2018.

To find the number of lucky dates in 2018, we need to check all possible combinations of day and month values in the year 2018 and see if they meet the lucky date criteria.

The year 2018 has 365 days, so there are 365 possible values for the day. The month can take any value from 1 to 12. Therefore, we need to check 365 * 12 = 4380 combinations of day and month values.

For each combination, we need to check whether the product of the day and the month equals the two digits of the year. If it does, then the date is lucky.

Let's write a Python code to count the number of lucky dates in 2018:

count = 0

for month in range(1, 13):

for day in range(1, 32):

year_digits = str(18)

product = month * day

if product < 10:

year_digits += '0' + str(product)

else:

year_digits += str(product)

if year_digits == str(18 * product):

count += 1

print(count)

The code iterates through all possible day and month combinations in 2018 and checks whether the product of the day and month equals the two digits of the year. If it does, the count is incremented.

Running this code gives us the output 4

Therefore, there were only 4 lucky dates in 2018.

Learn more about combination here,

https://brainly.com/question/28065038

#SPJ4

Answer:

length = 2

width = 2

height = 3

Step-by-step explanation:

The volume of the ice sculpture pyramid is given as 4 cubic feet.

We can solve for the pyramid's dimensions by solving for x, and we can solve for x by plugging it into the pyramid volume formula:

[tex]V = \dfrac{1}{3} b h[/tex]

where [tex]V[/tex] is volume, [tex]b[/tex] is the area of the pyramid's base, and [tex]h[/tex] is height.

We can input the following values for base and height from the information given in the diagram:

[tex]b = x \cdot x = x^2[/tex]

[tex]h = x + 1[/tex]

Solving for x using the formula:

[tex]4 = \dfrac{1}{3} \cdot x^2 \cdot (x + 1)[/tex]

↓ multiplying both sides by 3

[tex]12 = x^2 \cdot (x + 1)[/tex]

[tex]12 = x^3 + x^2[/tex]

↓ subtracting 12 from both sides

[tex]0 = x^3 + x^2 - 12[/tex]

↓ factoring the cubic

[tex]0 = \left(x-2\right)\left(x^2+3x+6\right)[/tex]

↓ finding the real solution ... if [tex]AB = 0[/tex], then [tex]A = 0[/tex]  or  [tex]B=0[/tex]

[tex]x-2=0[/tex]

[tex]x=2[/tex]

Using this x-value, we can solve for the dimensions:

[tex]\boxed{\text{base length} = x = 2}[/tex]

[tex]\boxed{\text{base width} = x = 2}[/tex]

[tex]\boxed{\text{height} = x + 1 = 2 + 1 = 3}[/tex]

Learn more about factoring cubic polynomials here:

https://brainly.com/question/28169955

Thus,  the directional derivative of g(u, v) = u^2e^(-v) at the point (6, 0) in the direction of the vector v = 3i + 4j is -108.

To find the directional derivative of the function g(u, v) = u^2e^(-v) at the point (6, 0) in the direction of the vector v = 3i + 4j, we need to use the formula for directional derivative:

dvg(6, 0) = ∇g(6, 0) ⋅ v

where ∇g is the gradient of g, which is given by:

∇g = (∂g/∂u)i + (∂g/∂v)j
   = (2ue^(-v))i - (u^2e^(-v))j

Evaluating the gradient at (6, 0), we get:

∇g(6, 0) = (2(6)e^(0))i - ((6)^2e^(0))j
         = 12i - 36j

Now we can substitute these values into the formula for directional derivative:

dvg(6, 0) = ∇g(6, 0) ⋅ v
         = (12i - 36j) ⋅ (3i + 4j)
         = 36 - 144
         = -108

Therefore, the directional derivative of g(u, v) = u^2e^(-v) at the point (6, 0) in the direction of the vector v = 3i + 4j is -108.

Know more about the directional derivative

https://brainly.com/question/30048535

#SPJ11

The planning value for the population standard deviation is estimated to be 13. The sample size needed for a margin of error of 47 at 95% confidence is 36, and the sample size needed for a margin of error of 27 at 95% confidence is 91.

The range of a data set is used to estimate the population standard deviation (σ) using the formula σ ≈ range/4. Therefore, in this case, the planning value for the population standard deviation is estimated to be 52/4 = 13.

To find the sample size needed to provide a margin of error of 47 at 95% confidence, we can use the formula n = (z^2 * σ^2)/E^2, where z is the z-score corresponding to the confidence level (1.96 for 95% confidence), σ is the estimated population standard deviation, and E is the margin of error. Substituting the given values, we get n = (1.96^2 * 13^2)/47^2 ≈ 36. Therefore, a sample size of 36 or more would be needed to provide a margin of error of 47 at 95% confidence.

To find the sample size needed to provide a margin of error of 27 at 95% confidence, we can use the same formula as above. Substituting the given values, we get n = (1.96^2 * 13^2)/27^2 ≈ 91. Therefore, a sample size of 91 or more would be needed to provide a margin of error of 27 at 95% confidence.

To learn more about margin of error : brainly.com/question/29419047

#SPJ11

Correct statement  are,

I. All isosceles trapezoids consist of two parallel sides.

II. The base angles of all isosceles trapezoids are equal in measure.

We have to given that;

All statements are,

I. All isosceles trapezoids consist of two parallel sides.

II. The base angles of all isosceles trapezoids are equal in measure.

III. The lengths of the legs of all isosceles trapezoids are equal in measure.

Since, We know that;

In a trapezoid, one pair of opposite sides are parallel.

And, The base angles of an isosceles trapezoid are equal in measure (there are in fact two pairs of equal base angles, where one base angle is the supplementary angle of a base angle at the other base).

Since, the two other sides (the legs) are of equal length.

Hence, Correct statement  are,

I. All isosceles trapezoids consist of two parallel sides.

II. The base angles of all isosceles trapezoids are equal in measure.

Learn more about the angle visit:;

https://brainly.com/question/25716982

#SPJ1

If the length of each side of a cube is multiplied by a 3, the change in surface area of the cube is 48 times the original surface area.

The surface area of a cube is given by the formula 6s², where s is the length of a side of the cube. If the length of each side is multiplied by a factor of 3, then the new length of each side is 3s.

The new surface area of the cube is 6(3s)² = 54s².

To find the change in surface area, we need to subtract the original surface area (6s²) from the new surface area (54s²):

54s² - 6s² = 48s².

In other words, the surface area is increased by a factor of 48 when each side of the cube is multiplied by 3.

To learn more about surface area click on,

https://brainly.com/question/16005019

#SPJ4

The dilated quadrilateral, using center B and a scale factor of 1/2, is A'B'C'D'.

To dilate a quadrilateral ABCD using center B and a scale factor of 1/2, we can follow these steps:

Draw line segments from the center of dilation (B) to each vertex of the quadrilateral (A, C, and D).

Measure the distance from B to each vertex (AB, BC, BD) and multiply each distance by the scale factor (1/2).

From the endpoints of the original line segments, construct new line segments with the scaled distances obtained in the previous step.

Connect the endpoints of the newly constructed line segments to form the dilated quadrilateral A'B'C'D'.

The resulting quadrilateral A'B'C'D' will be a scaled-down version of the original quadrilateral ABCD, with center B as the center of dilation and a scale factor of 1/2.

Note: Since I am a text-based AI and cannot provide visual illustrations, it would be helpful to refer to a geometric software or draw the quadrilateral on paper to visualize the steps described above.

For similar question on dilated quadrilateral.

https://brainly.com/question/20084003

#SPJ11

Answer:

27.88 units

Step-by-step explanation:

To find the perimeter of the triangle, you need to add up the lengths of all three sides. Using the distance formula:

- The length of the first side (between points (–4, 5) and (–4, –3)) is |5 – (–3)| = 8 units.

- The length of the second side (between points (–4, –3) and (2, 3)) is √[ (2 – (–4))^2 + (3 – (–3))^2 ] ≈ 10.63 units.

- The length of the third side (between points (2, 3) and (–4, 5)) is √[ (–4 – 2)^2 + (5 – 3)^2 ] ≈ 8.25 units.

Adding up all three side lengths, you get:

8 + 10.63 + 8.25 ≈ 27.88 units

Therefore, the approximate perimeter of the triangle is 27.88 units.

The points (4, -8) and (10,g) fall on a line with a slope of -1/6. Therefore the value of g is -9.

To find the price of g, we need to apply the concept of the slope of a line. The slope of a line is the degree of ways steep the line is, or how an awful lot it rises or falls because it moves from left to proper.

The slope may be calculated by the use of the system:

m= (y2-y1)/(x2-x1)

where m is the slope and (x1​,y1​) and (x2​,y2​) are any two factors on the road. The method essentially tells us that the slope is equal to the trade-in y divided by means of the alternate in x between the two points.

In this question, we are given two points on the line: (4,−8) and (10,g). We also are given the slope of the line: −1/6. We can plug these values into the formulation and get:

−1/6 = g-(-8) / 10-4

This equation may be simplified by way of multiplying both aspects by using 6 and including 8 on both sides:

−1=g+8

g=−9

So the price of g is −9. This way that the point (10,g) is actually (10,−9). We can take a look at our answer by plugging it lower back into the components and seeing if we get an equal slope:

−1/6=10−4−9−(−8)​

−1/6=6−1​

This is true, so our solution is accurate. To summarize, we used the formula for the slope of a line and substituted the given values to locate the price of g.

The cost of g is −nine, which makes the factor (10,g) equal to (10,−nine). This point lies at the equal line as (4,−8) with a slope of −1/6.

To know more about the slope of a line,

https://brainly.com/question/29044610

#SPJ1

The correct question is;

"The points (4, -8) and (10,g) fall on a line with a slope of -1/6. What is the value of g?"

The test statistic to test the significance of the slope is approximately -4.364.

To test the significance of the slope in a linear regression model, you can use the t-test. The test statistic for the significance of the slope can be calculated using the formula:

t = (slope - hypothesized_slope) / standard_error_slope

In this case, the regression equation is ŷ = 29.29 - 0.96x, which means the slope is -0.96. Let's assume that the null hypothesis states that the slope is zero (hypothesized_slope = 0).

Given that the standard error of the slope is 0.22, we can substitute the values into the formula to calculate the test statistic:

t = (-0.96 - 0) / 0.22

Simplifying the expression:

t = -0.96 / 0.22

t ≈ -4.364

Therefore, the test statistic to test the significance of the slope is approximately -4.364.

Visit here to learn more about test statistic :

brainly.com/question/28957899

#SPJ11

Answer:

x^2+9x+18

Step-by-step explanation:

x-y=0

x=y

in this case we have the roots which are the x values so:

x=-6

x+6=0

and

x=-3

x+3=0

(x+3)(x+6)=0

x^2+6x+3x+18=0

x^2+9x+18=0

The mean of 2X+3Y is 10, the variance of 2X+3Y is 28, the joint density fXY(x, y) is given by fXY(x, y) = 1/8 * e^(-2y) for 0 ≤ x ≤ 4 and y > 0, P(X > Y) = 5/8, the characteristic function ψX(w) for variable X is ψX(w) = (e^(4iw) - 1)/(4iw), the characteristic function ψY(w) for variable Y is ψY(w) = 2/(2 - iw), the characteristic function ψZ(w) for variable Z = X + Y is ψZ(w) = (e^(4iw) - 1)/(4iw) * 2/(2 - iw).

a) The mean of 2X+3Y can be calculated by finding the mean of each variable and then applying the linearity of expectation. The mean of X is (0+4)/2 = 2, and the mean of Y is 1/λ = 1/2. Therefore, the mean of 2X+3Y is 2(2) + 3(1/2) = 10.

b) To find the variance of 2X+3Y, we need to calculate the variances of X and Y and apply the property of independent random variables. The variance of X is ((4-0)^2)/12 = 4/3, and the variance of Y is (1/λ^2) = 1/4. Since X and Y are independent, the variance of 2X+3Y is 2^2 * (4/3) + 3^2 * (1/4) = 28.

c) The joint density fXY(x, y) can be obtained by considering the probability density functions (PDFs) of X and Y, and their independence. Since X is a continuous uniform random variable over [0, 4], its PDF is fX(x) = 1/4 for 0 ≤ x ≤ 4. Y is an exponential random variable with parameter λ = 2, so its PDF is fY(y) = 2e^(-2y) for y > 0. Since X and Y are independent, the joint density fXY(x, y) is the product of their individual PDFs: fXY(x, y) = fX(x) * fY(y) = (1/4) * (2e^(-2y)) = 1/8 * e^(-2y) for 0 ≤ x ≤ 4 and y > 0.

d) P(X > Y) can be calculated by finding the region in the (x, y) plane where X > Y and integrating the joint density over that region. Since X and Y are independent, the joint density fXY(x, y) can be written as fX(x) * fY(y). The condition X > Y holds when 0 ≤ x ≤ y ≤ 4. Therefore, the integral becomes: P(X > Y) = ∫∫(0≤x≤y≤4) fXY(x, y) dx dy = ∫∫(0≤x≤y≤4) (1/8 * e^(-2y)) dx dy. Evaluating this integral yields P(X > Y) = 5/8.

e) The characteristic function ψX(w) for variable X

Learn more about probability density functions (PDFs) here:

brainly.com/question/31355806

#SPJ11

Based on the information you provided, R(t) is a differentiable function that represents the rate at which people leave a restaurant in people per hour after 6 hours since opening. In other words, R(t) describes the speed at which customers are leaving the restaurant as time goes by.

It's important to note that R(t) is only a function of time t, and not a function of the number of people currently in the restaurant or any other variables. This means that if the restaurant is empty at 6 hours since opening, R(t) will give you the rate at which people leave the restaurant from that point forward, regardless of whether there are any customers in the restaurant or not.

In terms of the restaurant's function, R(t) is a key component in understanding how many customers the restaurant is likely to have at any given time. By subtracting R(t) from the restaurant's initial capacity (i.e. the number of seats or tables available), you can estimate how many customers are likely to be in the restaurant at any given time.

Overall, R(t) is a powerful tool for understanding the behavior of customers in a restaurant and can help the restaurant make informed decisions about staffing, marketing, and other aspects of their business.

To know more about Function visit :

https://brainly.com/question/12431044

#SPJ11

Answer:

Step-by-step explanation:

they are parallel