Answer:
14
Explanation:
Atomic mass = protons + neutrons
6 + 8 = 14
Which statement best describes what would happen to an ecosystem once the sun is removed?
A. The functions within the ecosystem will eventually stop & everything will die off.
B. The ecosystem will continue to thrive; it does not need the sun's energy to work.
C. The ecosystem will look for a different source of energy to use.
D. The ecosystem will instantly stop working.
Answer:
A. The functions within the ecosystem will eventually stop & everything will die off.
Explanation:
Everything is dependent on the sun --starting from the bottom of the food chain, the producers. However, we wouldn't die instantly because "Earth retains heat fairly well, so humans wouldn't freeze instantly."
For questions 14-16 pick out the variables that will be needed to answer the following question: Do trees grow faster if it is wetter in the summer?
14) What is the independent variable?
a.) amount of rain
b.) no rainfall
c.) amount of growth
15) What is the dependent variable?
a.) amount of rain
b.) no rainfall
c.) amount of growth
16) What is the control?
a.) amount of rain
b.) no rainfall
c.) amount of growth
Answer:
14) A. amount of rain
15) C. amount of growth
16) B. no rainfall
Explanation:
6e7eyehdjjdueebbevdvdvebe
Diffraction is a wave property that electrons possess
- true
- false
Answer:
The given statement is "True". A further explanation is provided below.
Explanation:
Diffraction occurs mostly with general noise, with electro-magnetic radioactive material, such as visible region, x-ray, but mostly gamma rays, and with very small moving molecules, such as atomic nuclei, as well as electrons, that also have wavelike characteristics. Yet another side effect of diffraction is because there are no dramatic or rapid shadows.Therefore this obvious response is the right one.
Which of the following is NOT needed for photosynthesis to take place?
A. glucose
B. chlorophyll
C. water
D. light energy
HELP
1) A 400g sample of alcohol (c = 2.43 J/g°C) at 16°C is mixed with 400g
of water (c = 4.19 J/g°C) at 85°C. What is the final temperature of the
mixture?
Answer:
Explanation:
Given data:
Mass of alcohol = 400 g
Specific heat capacity of alcohol = 2.43 J/g°C
Initial temperature of alcohol = 16°C
Mass of water = 400 g
Specific heat capacity of water = 4.19 J/g°C
Initial temperature of water = 85°C
Final temperature of mixture = ?
Solution:
Equation:
m₁c₁ (T₂-T₁ ) = m₂c₂(T₂-T₁)
by putting values,
400 × 4.19 × (T₂ - 85°C) = 400 × 2.43 × (T₂ - 16°C)
1676 × (T₂ - 85°C) = 972 × (T₂ - 16°C)
What are the needs & advantages of career planning?
in the blanks using the options given below:
Career is a sequence of related jobs arranged in a .........order.
Wrong choice of career may lead to.................
Agriculture, veterinary and nursing provide better........ ... to
young people.
Poor health and safety condition in an organization
causes.................effect on the choice of career.
The essence of career planning is the................ of individual goal
with organizational goal.
gative, hirarchical, frustration, bridging, lucrative, attraction
Answer:
The correct options are;
1) Hierarchical
2) Frustration
3) Attraction
4) Gative
5) Bridging
Explanation:
A career can be defined as a person's trade or occupation, which he or she engages and progresses in for a considerable portion of his or her life
When a person is engaged in a career that is not best suited to them can therefore lead to frustration, due to the length of time required in building a career
Agriculture, veterinary and nursing are mainly hands on or time input (for agriculture) careers, that seek to attract young people
The existence of poor health and safety conditions in an organization limits the advancement of individuals in their chosen career within the organization
Therefore, we have;
Career is a sequence of related jobs arranged in a hierarchical order
Wrong choice of career may lead to frustration
Agriculture, veterinary, and nursing provide better attraction to young people
Poor health and safety conditions in an organization causes gative effect on the choice of career
The essence of career planning is the bridging of individual with organizational goal.
What did the Curies conclude about radioactivity based on their studies?
A. The amount of radioactivity is an extensive property because it varies as the amount of material varies.
B. The amount of radioactivity is an extensive property because it remains constant as the amount of material varies.
C. The amount of radioactivity is an intensive property because it varies as the amount of material varies.
D. The amount of radioactivity is an intensive property because it remains constant as the amount of material varies.
Answer:
c
Explanation:
A species of kangaroo has a diploid chromosome number of 16. After meiosis, to develop the kangaroo’s sperm or egg, the haploid number would be
. When fertilization occurs, the zygote would again have 16 chromosomes.
Answer:
Just to prove that the persons answer on top of mine is correct :D
Explanation:
Answer:
Explanation:
8
Dan wants to test the effects of different amounts of antibiotic on bacteria. While setting up his experiment he makes sure to use the same type of antibiotic, the same type of bacteria, and the same type of incubator for each trial. Which phrase below best describes this part of the experiment?
Answer:
C
Explanation:
A. analyzing results
B. collecting data
C. choosing controlled variables
D. making a prediction
The correct answer would be choosing controlled variables.
The controlled variables are factors that are kept constant among the different groups of subjects during the course of an experiment so as to be able to isolate the effects of a single factor - the independent variable.
There are basically 3 types of variables in a scientific experiment;
1. The independent variable
2. The dependent variable
3. The controlled variable
The independent variables are the variables whose effects are to be determined in the course of experiments. The dependent variables are the variables that are actually measured during the course of experiments and whose values vary along with that of the independent variables. The controlled variables are other variables required for the experiment but which must be kept constant among subjects in order to be able to isolate the effects of the independent variable.
The correct option is C.
There is a photon with an energy of 4.51 x 10^-34 J. What is the wavelength of
this light? in nm
Answer:
4.4045358859215327e-17 nm
Explanation:
Hope this helped!
A 0.85% saline solution is: a.8.5 mL of saline added to 91.5 mL of water b.85 g of NaCl made up to 1,000 mL of water c.0.85 g NaCl made up to 100 mL of water d.8.5 g NaCl in 100 mL of water
Answer:
c
Explanation:
A 0.85% saline solution would consist of 0.85 g NaCl made up to 100 mL of water.
A 0.85% saline solution contains 0.85% by weight of NaCl. Hence, in order to prepare such a solution, 0.85 g of NaCl is weighed out into a beaker or cylinder and distilled water is added up to the 100 mL mark. On the other hand, 8.5 g of the NaCl can be weighed out and then distilled water added to 1000 mL mark.
The correct option is, therefore, c.
Write the name of the covalent compound ON.
Answer:
the answer is oxygen mononitride
Why does salt sprinkled on icy roads cause the ice to melt?
Answer:
The actual reason that the application of salt causes ice to melt is that a solution of water and dissolved salt has a lower freezing point than pure water. When added to ice, salt first dissolves in the film of liquid water that is always present on the surface, thereby lowering its freezing point below the ices temperature. Ice in contact with salty water therefore melts, creating more liquid water, which dissolves more salt, thereby causing more ice to melt, and so on.
is methane used as fule
gas true or false
Answer:
its true methane is used as a fuel gas
Explanation:
What is the approximate energy of a photon having a frequency of 4 x 10^7 Hz? (h = 6.6 x 10^-34 J . s)
Answer:
2.64 ×[tex]10^{-26}[/tex] J
Explanation:
I think you should mark it a physics question instead but anyway.
---------------------------------------------------------------------------
The Planck equation should be applied:
E = hv , while E is energy of proton; h is Planck constant; and v is frequency.
E = 6.6 × [tex]10^{-34}[/tex] × 4 × [tex]10^{7}[/tex]
= 6.6 × 4 × [tex]10^{-27}[/tex]
= 2.64 ×[tex]10^{-26}[/tex] J
The curved upper surface of a liquid in a column of liquid?
Answer:
The answer would be meniscus.
A silver ring reacts with compounds containing sulfur in the air to form silver sulfide, a black substance that makes up the tarnish on the surface of silver objects. To remove the tarnish from the ring, students placed it in a pan lined with aluminum foil and added hot water. Baking soda was added to the hot water and stirred. Students made observations about the process. Which observation of this process provides evidence of a chemical reaction?
Question 4 options:
A Hot water heated the aluminum foil.
B The liquid solution changed color.
C The pan was lined with aluminum foil.
D The hot water cooled.
Answer:
c lined with aluminum foil
3 The weight of an atom is determined primarily by —
A) the total number of protons plus neutrons
B) the total number of protons plus electrons
C) the total number of neutrons plus electrons
D) the total number of electrons, protons, and neutrons
Answer:
A)The total number of protons plus neutrons= Weight of an atom
what does ǵene of interest¨ mean ?
How does the atomic radius of an element is related to its metallic character
Answer:
The large the atomic radius the more the metallic character of elements
Explanation:
The atomic radius is related to the metallic character in a way that the larger the atomic radius, the more metallic a body becomes.
Therefore, as we go down a group, metallic character increases.
Metallic character relies on the ability and willingness of an atom to share its valence electrons. As the size of an atom becomes large, the more metallic it is and the more its metallic character. In some other cases this character is known as electropositivity.Help me plz I don’t know what it’s mean
Answer:
1 has the highest density because it has the most amount of circles in the least amount of space- it is the most densely filled with circles; it is the most dense.
Answer:
image 1 would have the highest density
Explanation:
the closer the molecules are the more solid an object is. if the molecules are far apart and rarely bump into eachother, it is more gaseous. the object in the middle (2) is a liquid
what would you need to do to calculate the molarity of 10g of NaCl in 2kg of water?
A. convert the 10 g of NaCl to Kg of NaCl
B. Convert the 10g of NaCl to moles of NaCl
C. Convert the 2kg of water to liters of water
D. Convert the 2kg of water to moles of water
Answer:
B) we will convert the 10 g of NaCl into moles.
Explanation:
Molarity is used to describe the concentration of solution. It tells how many moles are dissolve in per litter of solution.
Formula:
Molarity = number of moles of solute / L of solution
we will convert the 10 g of NaCl into moles.
Number of moles of NaCl:
Number of moles = mass/molar mass
Number of moles = 10 g/ 58.44 gmol
Number of moles = 0.17 mol
1 Kg = 1 L
Molarity = 0.17 mol / 2 L
Molarity = 0.085 mol/L
Molarity = 0.085 M
Answer:
B. Convert the 10g of NaCl to moles of NaCl
What is the bond angle that corresponds to the
geometry associated with C1 in the structure?
A. 120° B. 90O
C. 1800
D. 109.5o
7. Between which bonded elements in the above
structure is there the strongest dipole moment?
A. Carbon to Carbon B. Hydrogen to Carbon
C. Oxygen to Carbon D. Oxygen to Hydrogen
8. What is the geometry associated with the C2 molecule in the structure?
A. linear B. trigonal planar C.bent D. tetrahedral
9. Among the choices below, which correctly describes the bonding taking place in the above structure?
A. 6 sigma bonds, 1 pi bond C. 6 sigma bonds, 2 pi bonds
B. 7 sigma bonds, 1 pi bond D. 7 sigma bonds, 2 pi bonds
50 POINTS..!!! NEED RHE ANSWER ASAP..!!! consider the original wave at the top of the illustration. compare the original wave to the other four. which wave represents a wave with the same volume but a lower pitch?
a). wave a
b). wave b
c). wave c
d). wave d
Answer:
my best guess is b
Explanation:
typically the lower the pitch the longer the wave line inbetween the inclines are
Question 11 of 32
When do scientists form a hypothesis?
A. Before they form a theory
B. After they form a theory
O C. Before they perform an experiment
D. After they perform an experiment
SUBMIT
Answer:
C
Explanation:
a hypothesis always comes first
Answer:
C
Explanation:
They form hypothesis first, then perform the experiment to test the hypothesis. After multiple experiments, they form a theory.
Thus C is correct
please give thanks by hitting that heart button :)
Hi! Can you help me with this?
Is a hydrogen gas a element, compound, or mixture?
Answer:
Hydrogen gas (H2) is a molecule, but not a compound because it is made of only one element. Water (H2O) can be called a molecule or a compound because it is made of hydrogen (H) and oxygen (O) atoms.
Explanation:
Hope this helped!!!
-BB
please mark me brainly
Answer:
It's an element. :)
Explanation:
What object do you think will take up
more space? Why do you think this?
Answer:
solids
Explanation:
BC they r heavier than liquid and gas
Because of this, railroads use the reaction to provide molten steel to weld steel rails together when laying track. When 23.00g of iron(III) oxide reacts with aluminum metal, how many moles of molten iron (Fe) are formed
Answer:
0.288 mole of Fe.
Explanation:
We'll begin by calculating the number of mole present in 23.00g of iron(III) oxide (Fe2O3). This can be obtained as follow:
Mass of Fe2O3 = 23 g
Molar mass of Fe2O3 = (56×2) + (16×3)
= 112 + 48
= 160 g/mol
Mole of Fe2O3 =?
Mole = mass /Molar mass
Mole of Fe2O3 = 23 / 160
Mole of Fe2O3 = 0.144 mole
Next, we shall write the balanced equation for the reaction. This is given below:
2Al + Fe2O3 —> Al2O3 + 2Fe
From the balanced equation above,
1 mole of Fe2O3 reacted to produce 2 moles of Fe.
Finally, we shall determine the number of mole of Fe produced by the reaction of 23 g (i.e 0.144 mole) of Fe2O3. This can be obtained as illustrated below:
From the balanced equation above,
1 mole of Fe2O3 reacted to produce 2 moles of Fe.
Therefore, 0.144 mole of Fe2O3 will react to produce = 0.144 × 2 = 0.288 mole of Fe.
Thus, 0.288 mole of Fe is obtained from the reaction.
Write True/False against the following statements and also correct the false statement.
Greater the calorific value better is the fuel.
Answer:
I think it is true you should go for true
what is a chemical change? and what is a physical change?
In a chemical reaction, there is a change in the composition of the substances in question; in a physical change there is a difference in the appearance, smell, or simple display of a sample of matter without a change in composition.
A chemical change is a change where something new can be formed and normally can not be changed back. Examples of a chemical change are precipitates being formed, gases being formed, quick temperature change rust, bubbling, foaming, burning, etc. A physical change is a change where nothing new is formed and normally can be changed back. For example you painted a wooden block red. If you want, you can always change the color again. Nothing chemically or permanantly happened to it. More examples of a physical change are; color change, change of state, luster, shape, size, hardeness, etc.
:)