Answer:
52 g was lost as carbon dioxide to the atmosphere
Explanation:
When lead carbonate is heated, it decomposes into two components:
1. Lead oxide
2. carbon dioxide
While the lead oxide remains a yellow solid in the heating container, the carbon dioxide escapes into the atmosphere as a gas. The equation of the reaction is as below:
[tex]PbCO_3_{(s)} --> PbO_{(s)} + CO_2_{(g)}[/tex]
Hence, if a 150 g lead oxide is heated in a container and the final mass is 98 g, it means 52 g (150 - 98) of the total mass has been lost as carbon dioxide to the atmosphere.
Four identical point charges (+6.0 nC) are placed at the corners of a rectangle which measures 6.0 m×8.0 m. If the electric potential is taken to be zero at infinity, what is the potential at the geometric center of this rectangle
The electric potential at the geometric center of this rectangle is determined as 43.2 V.
Potential at the center of the rectanglePotential at the center of the rectangle is calculated as follows;
Let the distance from each corner to the center = xLet the length = aLet the breadth = bDistance from each corner to the center is calculated as follows;
[tex]x = \sqrt{(a/2)^2 + (b/2)^2}[/tex]
Potential due to four point charges is calculated
[tex]V = \frac{kq}{x} \\\\V =4 (\frac{kq}{x} )\\\\V = 4(\frac{kq}{\sqrt{(a/2)^2 + (b/2)^2} } )\\\\V = \frac{4 \times 9\times 10^{9}\times 6\times 10^{-9}}{\sqrt{(6/2)^2 + (8/2)^2} } \\\\V = \frac{4 \times 9\times 10^{9}\times 6\times 10^{-9}}{5} \\\\V = 43.2 \ Volts[/tex]
Learn more about electric potential here: https://brainly.com/question/14306881
#SPJ2
What is the magnetic force on a particle that has 0.000500 C of charge and is moving at
2.50 10m/s to the right through a magnetic field that is 4.20 T and pointing away from
you? Specify both magnitude and direction in your answer.
Answer:
1.) F = 5.3×10^-3 N
2.) Positive y - direction
Explanation:
The parameters given are:
Charge q = 0.0005C
Velocity V = 2.5010 m/s
Magnetic field B = 4.2 T
Magnetic force F = BVqsinØ
F = BVq
since Ø = 90 degree
Substitute all the parameters into the formula
F = 4.2 × 2.5010 × 0.0005
Therefore, the magnetic force on a particle is F = 5.3 × 10^-3 N
2.) According to Fleming's left hand rule, the direction of the magnetic force will be perpendicular to the magnetic field which moving upward of the screen.
Answer:
it’s f=0.0005 x 2.5 x 10^5 x 4.20
F= 525 N
+ y direction (up)
Explanation:
got it right
Which property describes the amount of energy that flows past a given area
per unit of time?
A. Wavelength
B. Speed
c. Intensity
D. Pitch
Answer:
c. Intensity
Explanation:
Wavelength is a distance (meters).
Speed is distance per time (meters / second).
Intensity is power per area (Watts / square meter).
Pitch is frequency (cycles / second).
Can anyone tell me how to read a micrometer screw gauge I want very clear instructions.
Explanation:
Things you need to know:
Accuracy refers to the maximum error encountered when a particular observation is made.
Error in measurement is normally one-half the magnitude of the smallest scale reading.
Because one has to align one end of the rule or device to the starting point of the measurement, the appropriate error is thus twice that of the smallest scale reading.
Error is usually expressed in at most 1 or 2 significant figures.
Tape
Equipment: It is made up of a long flexible tape and can measure objects or places up to 10 – 50 m in length. It has markings similar to that of the rigid rule. The smallest marking could be as small as 0.1 cm or could be as large as 0.5 cm or even 1 cm.
How to use: The zero-mark of the measuring tape is first aligned flat to one end of the object and the tape is stretched taut to the other end, the reading is taken where the other end of the object meets the tape.
Ruler
Equipment: It is made up of a long rigid piece of wood or steel and can measure objects up to 100 cm in length. The smallest marking is usually 0.1 cm.
How to use: The zero-end of the rule is first aligned flat with one end of the object and the reading is taken where the other end of the object meets the rule.
Vernier Caliper
Equipment: It is made up of a main scale and a vernier scale and can usually measure objects up to 15 cm in length. The smallest marking is usually 0.1 cm on the main scale.
It has:
a pair of external jaws to measure external diameters
a pair of internal jaws to measure internal diameters
a long rod to measure depths
How to use: The jaws are first closed to find any zero errors. The jaws are then opened to fit the object firmly and the reading is then taken.
Micrometer Screw Gauge
Equipment: It is made up of a main scale and a thimble scale and can measure objects up to 5 cm in length. The smallest marking is usually 1 mm on the main scale (sleeve) and 0.01 mm on the thimble scale (thimble). The thimble has a total of 50 markings representing 0.50 mm.
It has:
an anvil and a spindle to hold the object
a ratchet on the thimble for accurate tightening (prevent over-tightening)
How to use: The spindle is first closed on the anvil to find any zero errors ( use the ratchet for careful tightening). The spindle is then opened to fit the object firmly (use the ratchet for careful tightening) and the reading is then taken.
2.0 MW is to arrive at a large shopping mall over two 0.100Ω lines. Estimate how much power is saved if the voltage is stepped up from 120 V to 1200 V and then down again, rather than simply transmitting at 120 V. Assume the transformers are each 99% efficient.
Answer:
55 MW.
Explanation:
So, we are given the following data or parameters Below;
=> "2.0 MW is to arrive at a large shopping mall over two 0.100Ω line.
=> " the voltage is stepped up from 120 V to 1200 V and then down again, rather than simply transmitting at 120 V."
=> "Assume the transformers are each 99% efficient."
STEP ONE: determine the current in the transmission line.
Output Current, i = Power/ voltage.
Output Current,i = (2.0 MW × 10^6 W/ 1 MW)/120.
Output Current,i = 1.66 × 10^4 A.
Therefore, current in the transmission line = output voltage × output current/99% × line voltage.
= 120 × 1.66 × 10^4/ 99% × 1200 = 1.68 × 10^3 A.
STEP TWO: determine the power loss in the two lines.
Power loss = i^2 × Resistance
Power loss = (1.66 × 10^4 )^2 × 0.1 × 2 = 5.5 × 10^7 watt.
STEP THREE: determine the power generated.
Power generated = 2 × 10^6 +5.5 × 10^7.
Power generated = 5.57 × 10^7 watt.
STEP FOUR: determine the step down transformer power.
= 2 × 10^6/99% = 2.02 × 10^6.
Thus, 2.02 × 10^6 + 5.57 × 10^5 = 2.58 × 10^6 watt.
STEP FIVE: Determine the total power and the saved power.
Total power = 2.58 × 10^6/ 99%= 2.6 × 10^6.
Saved power = 5.7 × 10^7 - 2.6 × 10^6 .
Conversion to MW gives saved power = 55 MW.
=
can someone proofread my Big freeze theory of the universe? does it make sense?
Answer:
Yes great job it was well written!:)
hey help me plzzzzz i will mark brainliest
Answer:
The answer to your question is given below.
Explanation:
Mechanical advantage (MA) = Load (L)/Effort (E)
MA = L/E
Velocity ratio (VR) = Distance moved by load (l) / Distance moved by effort (e)
VR = l/e
Efficiency = work done by machine (Wd) /work put into the machine (Wp) x 100
Efficiency = Wd/Wp x100
Recall:
Work = Force x distance
Therefore,
Work done by machine (wd) = load (L) x distance (l)
Wd = L x l
Work put into the machine (Wp) = effort (E) x distance (e)
Wp = E x e
Note: the load and effort are measured in Newton (N), while the distance is measured in metre (m)
Efficiency = Wd/Wp x100
Efficiency = (L x l) / (E x e) x 100
Rearrange
Efficiency = L/E ÷ l/e x 100
But:
MA = L/E
VR = l/e
Therefore,
Efficiency = L/E ÷ l/e x 100
Efficiency = MA ÷ VR x 100
Efficiency = MA / VR x 100
One solution to minimize resonance with buildings is to ______ the width to span ratio.
Answer:
Increase
Explanation:
Resonance is a phenomenon which occurs when a body A in motion set another body B into motion of it own natural frequency. So for resonance to be minimize in a body is to increase the width to span ratio. So as to reduce the overall vibration which affects directly building resonance, the stiffness or trusses and girders should be increase. The increase in this aspect helps to reinforce building structure and support.
electronegativity increases when atoms ___
A.have a small atomic radius
B.are located in the right on the periodic table
C.are located on the left on the periodic table
D.have a large atomic radius
your answer is.....
D. have a large atomic radius
although they also increase going from left to right so if D is incorrect, B might be your answer. it depends on context of the lesson.
A submarine emerges 1/9 of its volume when it partially floats on the sea surface. For make it completely submerge it is necessary to allow a volume of 50,000 [L] to enter of sea water whose density is 1,026 [g / cm3]. What is the weight of the submarine?
Answer:
4,524,660 N
Explanation:
Assuming the submarine's density is uniform, 1/9th of the submarine's mass is equal to the mass of the displaced water.
m/9 = (1026 kg/m³) (50 m³)
m = 461,700 kg
mg = 4,524,660 N
(b) Calculate the momentum when a mass of 40kg is moving with a velocity of 20m/s in the forward
direction.
Explanation:
momentum = mass x velocity
momentum = 40 x 20 = 800kgm/s
Answer:
800kgm/s
Explanation:
momentum= mass×velocity
= 40×20
= 800kgm/s
Which of the following does each different kind of atom represent?
O A. A nucleus
O B. An element
O C. An electron
OD. A neutron
Answer:
B
Explanation:
because atoms make up an element.
Answer:
B
Explanation:
it's b because an element makes up an atom and signifies the number of element in atom e.g (H2) the two signifies the number of atoms
what is a primary source?
Answer:
A primary source is an original document such as diaries, speeches, manuscripts, letters, interviews, records, eyewitness accounts, autobiographies. Empirical scholarly works such as research articles, clinical reports, case studies, dissertation
Explanation:
Answer:
Scientific paper
Explanation:
A p e x
Power is _________________the force required to push something the work done by a system the speed of an object the rate that the energy of a system is transformed the energy of a system
Answer:
[defined as]
Explanation:
it is the missing word
A man has a mass of 110kg. What is his weight?
His weight depends on where he is, because
Weight = (mass) x (gravity in the place where the mass is) .
For example:
-- If this man is on Mars, his weight is (110 kg) x (3.7 m/s²) = 408 Newtons
-- If he is on the Moon, his weight is (110 kg) x (1.6 m/s²) = 176 Newtons
-- If he is on Earth, his weight is (110 kg) x (9.8 m/s²) = 1,078 Newtons
-- If he is in a spacecraft coasting from one to another, his weight is zero.
Proved that
V = u+at
Answer:
[tex]\sf Proof \ below[/tex]
Explanation:
We know that acceleration is change in velocity over time.
[tex]\sf a=\frac{\triangle v}{t}[/tex]
[tex]\sf a=\frac{v-u}{t}[/tex]
v is the final velocity and u is the initial velocity.
Solve for v.
Multiply both sides by t.
[tex]\sf at=v-u[/tex]
Add u to both sides.
[tex]\sf at + u=v[/tex]
Answer:
Acceleration = v-u/t when we flip -u and t to right hand side
then -u changes to plus and denominator t changes to numerator
then then this equations becomes v=u+at
Explanation:
Calculate the acceleration of a mobile that at 4s is 32m from the origin, knowing that its initial speed is 10m / s.
Answer:
5.5 m/s^2
Explanation:
I believe this is the answer > using the formula a= v-v0/t
Hope this helps!
Answer:
-1 m/s²
Explanation:
Given:
Δx = 32 m
v₀ = 10 m/s
t = 4 s
Find: a
Δx = v₀ t + ½ at²
32 m = (10 m/s) (4 s) + ½ a (4 s)²
a = -1 m/s²
Which of the following statements are true? (mark all that apply)
A) Adaptive optics corrects for atmospheric distortion by following the distortion of a bright star, possibly an artificial star created by a laser, and rapidly changing the shape of a mirror using computer-controlled actuators to compensate for the distortion.
B) Improvements in technology will eventually allow the entire electromagnetic spectrum to be observed from high mountaintop observatories.
C) X rays from astronomical objects can only be detected from telescopes in space or in high altitude rockets.
D) The best observing sites for optical telescopes are atop remote mountains.
E) Radio telescopes must be carried to high altitudes by balloons in order to detect this type of radiation.
Answer:
The answer(s) for this question are as followed: A, C, & D
Explanation:
I hope this helped, let me know if i missed any.
analyze this physics mystery and be marked brainliest
Answer:
The two middle chains are for suspension of the glass surface, while the fours chains at all corners prevents tilting
Explanation:
From the picture, the the frame bearing the glass surface is suspended by the two metal chains at the middle,
While the balance to avoid tilting to either directions is maintained by the four chains at all corners.
Find the net force of the box and the acceleration. 10 points. Will give brainliest.
Answer:
38.6 N
2.57 m/s²
Explanation:
Draw a free body diagram of the box. There are four forces:
Weight force mg pulling down,
Normal force N pushing up,
Friction force Nμ pushing left,
and applied force P pulling at an angle 40°.
Sum of forces in the y direction:
∑F = ma
N + P sin 40° − mg = 0
N = mg − P sin 40°
The net force in the x direction is:
∑F = P cos 40° − Nμ
∑F = P cos 40° − (mg − P sin 40°) μ
∑F = P cos 40° − mgμ + Pμ sin 40°
∑F = P (cos 40° + μ sin 40°) − mgμ
Plugging in values:
∑F = (80 N) (cos 40° + 0.23 sin 40°) − (15 kg) (10 m/s²) (0.23)
∑F = 38.6 N
Net force equals mass times acceleration:
∑F = ma
38.6 N = (15 kg) a
a = 2.57 m/s²
A ball is thrown vertically upwards from the roof of a building with an initial velocity of 30 m / s. If it stops in the air 220 m above the ground, what is the height of the building?
Answer:
175 m
Explanation:
Given:
y = 220 m
v₀ = 30 m/s
v = 0 m/s
a = -10 m/s²
Find: y₀
v² = v₀² + 2a (y − y₀)
(0 m/s)² = (30 m/s)² + 2 (-10 m/s²) (220 m − y₀)
y₀ = 175 m
The definition of parallel lines requires the terms line and plane while the definition of perpendicular lines requires the undefined terms of line and point.
Answer with explanation:
Complete question is provided in the attachment below.
There are 3 undefined term in geometry :1) A Point 2) A line 3) A Plane.
When two lines are parallel they never meet , so the requirement to define them is lines and a plane on which they lie.
While when two lines are perpendicular , they intersect each other at a point by making a right angle between them.
So it required lines and a point to define it.
Train cars are coupled together by being bumped into one another. Suppose two loaded train cars are moving toward one another, the first having a mass of 270000 kg and a velocity of 0.325 m/s in the horizontal direction, and the second having a mass of 52500 kg and a velocity of -0.12 m/s in the horizontal direction. What is their final velocity?
Answer:
0.252 m/s
Explanation:
Applying the law of conservation of momentum,
Total momentum before collision = Total momentum after collision
Note: From the question, The collision between the car and the train is an inelastic collision and as such, both move with a common velocity after collision.
mu+m'u' = V(m+m')................... Equation 1
Where m = mass of the train, u' = initial velocity of the train, m' = mass of the car, u' = initial velocity of the car, V = common velocity after collision.
make V the subject of the equation
V = (mu+m'u')/(m+m')............... Equation 2
Given: m = 270000 kg, u = 0.325 m/s, m' = 52500 kg, u' = -0.12 m/s
Substitute these values into equation 2
V = [(270000×0.325)+{52500(-0.12)}]/(270000+52500)
V = 81450/322500
V = 0.252 m/s
The three-dimensional arrangement of electron groups around the central atom is called ____.
A. Election-pair repulsion
B. Electronegativity
C. Geometric design
D. Electron-group geometry
Answer:
D. Electron - group geometry
Explanation:
Just did it boom THE BANK BUSTA WINS AGAIN
the velocity is always _____ to the line of a circle
Answer:
tangent
Explanation:
hope it helps
Answer:
the answer is tangent
Explanation:
tangent means a straight line or plane that touches a curve or curved surface at a point, but if extended does not cross it at that point.
hope this helps please like and heart this answer and give 5 stars and brainliest pls i beg u thx!!! : )
An object weighs 0.250 kgf in air, 0.150 kgf in water and 0.125 kgf in an oil.
Find out the density of the object and the oil.
Answer: Upthrust = Weight - Apparent weight
= 0.250 kgf - 0. 150 kgf
= 0.100 kgf
Density = mass / volume
volume = mass / density
= 0.100 kg / (1000 kg / m³)
= 0.0001 m³
density of object = mass / volume
= 0.250 kg / 0.0001 m³
= 2500 kg / m³
upthrust of oil = Weight - Apparent weight
= 0.250 kgf - 0.125 kgf
= 0.125 kgf
density = mass / volume
= 0.125 kg / 0.0001 m³
= 1250 kg/m³
density of the object = 2500 kg / m³
density of oil = 1250 kg / m³
A ball is projected at an angle of elevation of 60 ° with an initial velocity of 120m/s.calculate
1) The time taken to get to the maximum height
ii) the time of flight
Explanation:
It is given that,
The angle of projection is 60 degrees
Initial velocity of the ball is 120 m/s
We need to find the time taken to get to the maximum height and the time of flight.
Time taken to reach the maximum height is given by :
[tex]T=\dfrac{u^2\sin^2\theta}{2g}[/tex]
g is acceleration due to gravity
[tex]T=\dfrac{(120)^2\times \sin^2(60)}{2\times 10}\\\\T=540\ s[/tex]
(ii) Time of flight,
[tex]t=\dfrac{2u\sin\theta}{g}[/tex]
So,
[tex]t=\dfrac{2\times 120\times \sin(60)}{10}\\\\t=20.78\ s[/tex]
Hence, this is the required solution.
The north pole of a bar magnet is rapidly introduced into a solenoid at one end (say A). Which of the following statements correctly depicts the phenomenon taking place?
(a) No induced emf is developed.
(b) The end A of the solenoid behaves like a south pole.
(c) The end A of the solenoid behaves like north pole.
(d) The end A of the solenoid acquires positive potential.
Answer:
The correct option is;
(b) The end A of the solenoid behaves like a north pole
Explanation:
According to Lenz's law we have that the induced emf direction in the solenoid due to the rapid introduction of the bar magnet will be such that the electric current induced will have a resultant magnet field that will oppose to the movement of the north pole of the bar magnet that resulted in the magnetic field
Therefore, the opposing magnetic pole to the north pole of a magnet is a north pole and the solenoid end A will act like the north pole.
Whenever the alternating current frequency in a series RLC circuit is halved,
a. the inductive reactance is doubled and the capacitive reactance is halved.
b. the inductive reactance is doubled and the capacitive reactance is doubled.
c. the inductive reactance is halved and the capacitive reactance is halved.
d. the inductive reactance is halved and the capacitive reactance is doubled.
e. the reactance of the circuit remains the same.
Answer:
The correct option is
a. The inductive reactance is doubled and the capacitive reactance is halved
Explanation:
For a series RLC circuit, is a resonant circuit such that the impedance, Z, is minimum at the resonance frequency
Also we have that the capacitive reactance [tex]X_C[/tex], is given as follows;
[tex]X_c = \dfrac{1}{\omega \cdot C}[/tex]
Where;
ω = Angular frequency = 2πf
Where;
f = The frequency in the circuit
[tex]\therefore X_c = \dfrac{1}{2 \cdot \pi \cdot f \cdot C}[/tex]
The inductive reactance is also given as follows;
[tex]X_L = \omega \cdot L = 2 \cdot \pi \cdot f \cdot L[/tex]
Therefore, when the circuit frequency doubles, the inductive reactance doubles and the capacitive reactance halves
When the alternating current frequency in a series RLC circuit is halved, the inductive reactance is doubled and the capacitive reactance is halved.
What is an alternating current frequency?An Alternating current (ac) frequency is known to be the amount of cycles per second that can be found in an ac sine wave.
The Frequency is known to be the rate through which the current changes direction in terms of per second. It is said to be often measured in hertz (Hz). Note that the alternating current frequency in a series RLC circuit is halved, the inductive reactance increases and the capacitive reactance is reduced.
Learn more about alternating current from
https://brainly.com/question/15595203
which discribes what a velocity/time graph would look like with no accelaration