assume that for some statistic 1000 tests were performed. to avoid the situation of the incorrectly found significance, bonferroni correction was applied. the resulting p-value is 0.00013. what significance level was chosen for the tests? the significance level was:

The equation is solved as x = −89.5. The correct option is 1.

What is a mathematical equation?

The definition of an equation in algebra is a mathematical statement that demonstrates the equality of two mathematical expressions.

To solve the equation −0.18x − 13.7 = 2.41 for x, we need to isolate x on one side of the equation by adding 13.7 to both sides and then dividing by −0.18:

−0.18x − 13.7 = 2.41

−0.18x = 2.41 + 13.7

−0.18x = 16.11

x = 16.11 / (−0.18)

x = −89.5

Therefore, the solution to the equation is x = −89.5. the correct option is 1.

Learn more about the mathematical equations, here:

https://brainly.com/question/31441014

#SPJ1

The base area, the lateral area and the surface area of the prism are 124.8 cm², 288 cm² and 412.8 cm², respectively.

In this problem we need to compute three kinds of areas in a prism with a triangular base. The base area, that is, the sum of the areas of the two triangles, the lateral area, that is, the sum of the areas of the three rectangles and the surface area, that is, the sum of the base and lateral areas.

The area formulas of the triangle and rectangle are, respectively:

Triangle

A = 0.5 · b · h

Rectangle

A = b · h

Where:

Now we proceed to determine each kind of area:

Base area

A = 2 · 0.5 · (12 cm) · (10.4 cm)

A = 124.8 cm²

Lateral area

A = 3 · (8 cm) · (12 cm)

A = 288 cm²

Surface area

A = 124.8 cm² + 288 cm²

A = 412.8 cm²

To learn more on surface areas: https://brainly.com/question/29298005

#SPJ1

The solution to the equation 4,300e^(0.07x) - 123 = 5,000 for x is 2.5.

We can solve the equation 4,300e^(0.07x) - 123 = 5,000 for x by first adding 123 to both sides and then dividing both sides by 4,300 and taking the natural logarithm of both sides:

Using the above as a guide, we have the following:

4,300e^(0.07x) - 123 = 5,000

4,300e^(0.07x) = 5,123

e^(0.07x) = 5,123/4,300

e^(0.07x) = 1.1914

0.07x = ln(1.1914)

x = ln(1.1914)/0.07

Using a calculator, we get:

x ≈ 2.50

Rounding to the nearest tenth, the solution to the equation is approximately 2.5.

Read more about equation at

https://brainly.com/question/148035

#SPJ1

The statement "Poisson distributions are useful to model any variables positive or negative as long as they are integer values" is false because Poisson distributions are specifically used for modeling the number of events occurring in a fixed interval of time or space, given a fixed average rate of occurrence (λ).

The key characteristics of a Poisson distribution are:

1. The events are independent, meaning the occurrence of one event does not influence the occurrence of another event.
2. The average rate of occurrence (λ) is constant throughout the interval.
3. The probability of more than one event occurring in an infinitesimally small interval is negligible.

Given these characteristics, Poisson distributions are not suitable for modeling any variables, positive or negative, as long as they are integer values. Instead, they are applicable for modeling non-negative integer values (0, 1, 2, ...) representing the number of events occurring in a specific context. Negative integer values are not applicable in this distribution since it would be illogical to have negative events occurring in a fixed interval.

In summary, Poisson distributions are only useful for modeling non-negative integer values representing the number of events in a fixed interval of time or space, given a fixed average rate of occurrence.

You can learn more about Poisson distribution at: brainly.com/question/17280826

#SPJ11

Therefore, the dimensions of the crate that minimize the cost of materials are approximately:

l = 1.587 ft
w = 2.519 ft
h = 3.159 ft

To minimize the cost of materials, we need to find the dimensions of the crate that will minimize the surface area of the crate. Let's call the height, width, and length of the crate "h", "w", and "l", respectively.

We know that the volume of the crate is 16 ft3, so we can write:

lwh = 16

We want to minimize the cost of materials, which is determined by the surface area of the crate. The surface area consists of the top, bottom, front, back, left, and right sides of the crate. The cost of the materials for the base is twice the cost of the materials for the sides, and the cost of the materials for the top is half the cost of the materials for the sides. Let's call the cost of the materials for the sides "c".

The surface area of the crate can be written as:

2lw + 2lh + 2wh

We can use the volume equation to solve for one of the variables, say "h":

[tex]h = \frac{16}{(lw)}[/tex]

Now we can substitute this expression for "h" into the surface area equation:

[tex]2lw + 2l(\frac{16}{(lw))} + 2wh[/tex]

Simplifying this expression gives:

[tex]2lw + 32/l + 2wh[/tex]
To find the dimensions that minimize this expression, we need to take the partial derivatives with respect to "l" and "w" and set them equal to zero:
[tex]\frac{d}{dl} (2lw + 32/l + 2wh) = 2w - \frac{32}{l^2} = 0\\[/tex]

[tex]\frac{d}{dw} (2lw + 32/l + 2wh) = 2l + 2h = 2l + 2(16/(lw)) = 2l + 32/(lw) = 0[/tex]
Solving these equations for "l" and "w" gives:

[tex]l = 2^{(1/3)}\\w = 2^{(2/3)}[/tex]

Substituting these values into the equation for "h" gives:

[tex]h = 8/(2^{(2/3)})[/tex]

Therefore, the dimensions of the crate that minimize the cost of materials are approximately:

l = 1.587 ft
w = 2.519 ft
h = 3.159 ft

learn more about volume

https://brainly.com/question/28058531

#SPJ11

The dimensions of the box that minimize the cost of materials are approximate:

x ≈ 2.52 ft

y ≈ 3.55 ft

z ≈ 2.52 ft

Let's denote the length, width, and height of the box as x, y, and z,

respectively. We are given the volume of the box is [tex]16 ft^3[/tex], so we

have:

x × y × z = 16

We are also given that the material used to make the base costs twice as

much (per square foot) as the material in the sides.

Let's denote the cost of the material for the sides as c, so the cost of the

material for the base is 2c.

The area of the base is xy, so the cost of the material for the base is

2cxy.

Similarly, the material used to make the top costs half as much (per

square foot) as the material in the sides.

Let's denote the cost of the material for the top as 0.5c.

The area of the top is also xy, so the cost of the material for the top is 0.5cxy.

The cost of the material for the four sides is simply 4cz.

Therefore, the total cost of materials is:

C(x, y, z) = 2cxy + 4cz + 0.5cxy

Simplifying, we have:

C(x, y, z) = (2.5c)xy + 4cz

We want to minimize this function subject to the constraint that the volume of the box is [tex]16 ft^3[/tex]:

x × y × z = 16

We can use the method of Lagrange multipliers to solve this constrained optimization problem:

L(x, y, z, λ) = (2.5c)xy + 4cz - λ(xyz - 16)

Taking partial derivatives with respect to x, y, z, and λ, we get:

dL/dx = 2.5cy - λyz = 0

dL/dy = 2.5cx - λxz = 0

dL/dz = 4c - λxy = 0

dL/dλ = xyz - 16 = 0

From the first two equations, we can solve for λ:

λ = 2.5cy/yz = 2.5cx/xz

Setting these two expressions equal to each other and simplifying, we get:

y/x = z/y

This implies that x:y:z = 1:√2:1, since we know that the dimensions of the box must be in proportion to each other.

Substituting this into the constraint x × y × z = 16, we get:

x = 2∛2

y = 2∛4

z = 2∛2

for such more question on dimensions

https://brainly.com/question/28107004

#SPJ11

Answer:

20

Step-by-step explanation:

So start with the ones you know like 2+2. So what I did is add the 2,s and then add the 4,s then I added 3,s which then added the 6,s the 8+12= 20 and that's how I got my answer.

The constant ratio in each representation include the following: r = 3.

In Mathematics, the nth term of a geometric sequence can be calculated by using this mathematical expression:

aₙ = a₁rⁿ⁻¹

Where:

Next, we would determine the common ratio in each representation as follows;

Common ratio, r = a₂/a₁

Common ratio, r = -6/-2 = -18/-6

Common ratio, r = 3.

Based on comparison with the exponential equation, the common ratio is given by;

Common ratio, r = 3.

Read more on geometric sequence here: brainly.com/question/16423479

#SPJ1

Answer: We can begin by factoring the quadratic expression in the numerator and denominator of the left-hand side of the inequality:

x^2 - 1 = (x + 1)(x - 1)

x^2 + 5x + 4 = (x + 1)(x + 4)

Substituting these expressions into the inequality, we get:

(x + 1)(x - 1)/(x + 1)(x + 4) ≤ 0

We can simplify this expression by canceling out the common factor of (x + 1) from both the numerator and the denominator:

(x - 1)/(x + 4) ≤ 0

To solve this inequality, we can use a sign chart or test values. Here's a sign chart:

x x - 1 x + 4 (x - 1)/(x + 4)

-4 -5 0 +

-1 -2 3 -

1 0 5 0

4 3 8 +

The inequality is satisfied when (x - 1)/(x + 4) is less than or equal to 0, which occurs when x is between -4 and -1, or when x is equal to 1. Therefore, the solution to the inequality is:

-4 ≤ x < -1 or x = 1

Step-by-step explanation:

The minimum possible diameter of a soccer ball is 8.60 inches, and the maximum possible diameter is 8.70 inches.

What is equations?

Equivalent equations are algebraic equations that are having identical roots or solutions.

The soccer ball specifications require a diameter of 8.65 inches, with an allowable margin of error of 0.05 inch.

This means that the actual diameter of any new soccer ball should be within the range of 8.60 inches to 8.70 inches. The equation that can be used to find the diameter of a new soccer ball is d = 8.65 ± 0.05, where d represents the diameter. The symbol "±" indicates that the diameter can be either 0.05 inches larger or smaller than the specified diameter of 8.65 inches.

It is important to ensure that the diameter of a soccer ball falls within this allowable range to comply with the specifications and ensure fair play.

Therefore, The minimum possible diameter of a soccer ball is 8.60 inches, and the maximum possible diameter is 8.70 inches.

To know more about equations visit,

brainly.com/question/2972832

#SPJ1

The value of c in increasing order which satisfy the Rolle's theorem for a given function is equal to  c = 1/4 and c = 3/4.

Function f(x) = 7sin(2πx) ,

Interval = [0, 1]

To apply Rolle's Theorem, check the following conditions,

f(x) must be continuous on the closed interval [a, b].

Here, the interval is [0,1].

f(x) must be differentiable on the open interval (a, b).

f(a) = f(b)

Function f(x) = 7sin(2πx).

f(x) is continuous on the interval [0, 1].

f(x) is differentiable on the interval (0, 1), and its derivative is,

f'(x) = 14π cos(2πx)

The derivative is continuous on the interval (0, 1).

f(0) = 7sin(0)

     = 0

f(1) = 7sin(2π)

     = 0

Since f(0) = f(1) = 0,

⇒ As per Rolle's Theorem there exists at least one number c in the interval (0, 1) .

Such that f'(c) = 0.

Values of c that satisfy this conclusion,

Solve the equation

f'(c) = 14π cos(2πc)

⇒14π cos(2πc) = 0

⇒ cos(2πc) = 0

This equation has solutions at c = 1/4 and c = 3/4,

As

cos(2π(1/4))

= cos(π/2)

= 0

and

cos(2π(3/4))

= cos(3π/2)

= 0.

Therefore, the values of c that satisfy the conclusion of Rolle's Theorem for the given function are c = 1/4 and c = 3/4, and they are already in increasing order.

Learn more about function here

brainly.com/question/29064534

#SPJ4

The above question is incomplete, the complete question is:

Find all numbers c that satisfy the conclusion of Rolle's Theorem for the following function 7sin(2pix) and interval [0, 1 ]. Enter the values in increasing order and enter N in any blanks you don't need to use.

a) The probability of him answering all seven questions correctly is [tex](1/4)^7[/tex]or approximately 0.000019%.

b) Therefore, the probability of him answering exactly three questions correctly is [tex]35 * (1/4)^3 * (3/4)^4[/tex]or approximately 19.7%.

c) The probability of him answering at least three questions correctly is the sum of these probabilities, which is approximately 71.5%.

Since each question has four choices and only one is correct, the probability of guessing the correct answer for any one question is 1/4.

a) To answer all seven questions correctly, Edward must guess the correct answer for each question.

Therefore, the probability of him answering all seven questions correctly is [tex](1/4)^7[/tex] or approximately 0.000019%.

b) To answer exactly three questions correctly, Edward must guess the correct answer for three questions and the incorrect answer for the remaining four questions.

The number of ways in which he can do this is given by the binomial coefficient C(7,3) = 35.

The probability of him guessing three questions correctly and four questions incorrectly is [tex](1/4)^3 * (3/4)^4.[/tex]

Therefore, the probability of him answering exactly three questions correctly is [tex]35 * (1/4)^3 * (3/4)^4[/tex]or approximately 19.7%.

c) To answer at least three questions correctly, Edward must either guess three, four, five, six, or seven questions correctly.

We have already calculated the probability of him guessing exactly three questions correctly.

The probability of him guessing exactly four questions correctly is [tex]C(7,4) * (1/4)^4 * (3/4)^3 = 35 * (1/4)^4 * (3/4)^3[/tex]or approximately 34.7%.

The probability of him guessing exactly five questions correctly is [tex]C(7,5) * (1/4)^5 * (3/4)^2 = 21 * (1/4)^5 * (3/4)^2[/tex] or approximately 16.3%.

The probability of him guessing exactly six questions correctly is[tex]C(7,6) * (1/4)^6 * (3/4)^1 = 7 * (1/4)^6 * (3/4)^1[/tex] or approximately 0.82%. Finally, the probability of him guessing all seven questions correctly is (1/4)^7 or approximately 0.000019%.

For similar question on probability.

https://brainly.com/question/28185528

#SPJ11

The IQR (Interquartile Range) of 13 is the most accurate measure of variability to use for this data since the data is skewed and contains outliers. The IQR is less sensitive to outliers than the range and provides a better representation of the spread of the middle 50% of the data.

Variability refers to the extent to which data points in a dataset differ from each other. It is a measure of how spread out or dispersed a set of data is.

In statistics, measures of variability are used to describe how spread out or clustered a set of data is. There are several measures of variability, but the two most common ones are the range and the interquartile range (IQR).

The range is the difference between the maximum and minimum values in a set of data. It is a simple measure of variability that gives an idea of how much the data varies. However, it can be affected by outliers, which are values that are much larger or smaller than the other values in the data set.

The IQR is a more robust measure of variability that is less affected by outliers. It is the difference between the third quartile (the value above which 75% of the data falls) and the first quartile (the value below which 25% of the data falls). The IQR describes the range of the middle 50% of the data and gives an idea of how spread out the data is around the median.

In the case of the charity's donations, the data is skewed towards the higher end, with most of the donations falling between $16 and $20. This means that the range of 13 (20-5) would be affected by the outliers at the high end, and would not accurately represent the variability of the data.

On the other hand, the IQR of 13 (the difference between the third quartile at $20 and the first quartile at $7) would give a more accurate representation of the variability of the data, as it is less affected by the outliers.

To know more about variability visit:

https://brainly.com/question/12872866

#SPJ1

0.5 is used as a conservative estimate of p in determining the minimum sample size for a proportion confidence interval to account for maximum uncertainty.

In statistical hypothesis testing and estimation, we often need to make inferences about population parameters based on a sample. One of the parameters of interest is the proportion of successes in a population.

When we construct a confidence interval for a proportion, we need to specify the desired level of confidence and the desired margin of error. The margin of error depends on the sample size and the standard error of the sample proportion.

The standard error of the sample proportion is estimated using the population proportion, p, which is unknown. Since we don't know the true value of p, we typically use the sample proportion, p-hat, as an estimate. However, using p-hat alone can lead to an overly optimistic estimate of the standard error and, therefore, an overly narrow confidence interval.

To account for this uncertainty, we use a conservative estimate of the standard error that assumes a worst-case scenario for p. The worst-case scenario is when p is 0.5, which corresponds to maximum uncertainty or variability in the estimate of the proportion. This is why 0.5 is often used as a conservative estimate of p when determining the minimum sample size necessary for a proportion confidence interval. By assuming p = 0.5, we ensure that our sample size is large enough to account for the worst-case scenario and provide a reliable estimate of the proportion.

Learn more about proportion confidence interval

brainly.com/question/13686615

#SPJ11

Answer:

parallelogram kite kite trapazoid

Experimental studies involve the manipulation of variables, and quasi-experimental studies involve some level of intervention but lack full control or randomization.

An observational study.

In an observational study, researchers collect data without intervening or manipulating any variables.

The study evaluated the association between exposure to anticholinergic drugs and dementia risk using existing data collected from an anonymized research database of more than 30 million individuals in over 1500 general practices. The data includes demographic information, medical diagnoses, prescriptions, referrals, laboratory results, and clinical values.
Case patients were those diagnosed with dementia during follow-up, and each case patient was matched to 5 controls by age, sex, general practice, and calendar time.

The study used information on prescriptions for 56 drugs with strong anticholinergic properties to calculate measures of cumulative anticholinergic drug exposure.

The data were analyzed from May 2016 to June 2018.
Since the researchers did not manipulate any variables or treatments and only analyzed existing data, it is considered an observational study.

The study uses data collected from a research database of routine healthcare, rather than manipulating variables in a controlled setting.

The researchers observed the exposure to anticholinergic drugs in patients and followed them over time to evaluate the association with dementia risk.

The study did not involve the manipulation of any variables, which is characteristic of experimental or quasi-experimental studies.

For similar questions on studies

https://brainly.com/question/28819016

#SPJ11

This is an observational study which we can infer from the given data in the question.

This is an observational study. In this study, the researchers evaluated the association between exposure to anticholinergic drugs and dementia risk using data collected from a large database. They identified case patients with dementia and matched them with controls based on age, sex, general practice, and calendar time. The researchers did not manipulate any variables or randomly assign participants to groups, which is characteristic of an observational study.

When conducting an observational study, researchers observe and gather data on a group of people or subjects without interfering or changing any of the factors. An observational study's objective is to identify and evaluate patterns, behaviours, or occurrences without modifying or altering them.

Observational studies can be carried out in a variety of locations, including the outdoors, businesses, homes, and communities. The social sciences, epidemiology, psychology, and medicine are just a few of the disciplines in which they might be applied.

The two subtypes of observational studies are prospective and retrospective. In a prospective observational study, a group of people is tracked over time as information is gathered on their behaviours, exposures, and results. On the other hand, a retrospective observational study looks back in time and gathers information.

Learn more about observational study here:

https://brainly.com/question/17593565

#SPJ11

Step-by-step explanation:

yes,because of SAS side angle side are equal.

The given triangles AOB and triangle OCB are proved congruent by using the property - angle side angle congruency.

Of three sides, three angles, plus three vertices, a triangle is a two-dimensional shape. If the matching sides or angles of two or more triangles match, the triangles are said to be congruent. Congruent triangles are identical in terms of their dimensions and shape.

Two triangles belong together if whose corresponding two angles but one included side are equivalent, according to the Angle- Side- Angle rule (ASA).

Given data:

As, AB || CD, ∠ABO ≅ ∠OCD (alternate interior angles)

∠AOB ≅ ∠COD (vertically opposite angles)

So,

∠AOB ≅ ∠COD

CO = OB

∠ABO ≅ ∠OCD

By using angle side angle congruence:

ΔAOB ≅ ΔCOD

Thus, the given triangles AOB and triangle OCB are proved congruent by using the property - angle side angle congruency.

know more about the triangle congruency:

https://brainly.com/question/3999145

#SPJ1

Answer:

gcf is 'x'

Step-by-step explanation:

the common factor to the terms 'x²' and '3x' is 'x'

Answer: c=a2+b2

Step-by-step explanation:

The ratio of LM to FG is 3:4, so correct option is A.

A triangle is a polygon with three sides, three vertices, and three angles. It is one of the basic shapes in geometry and has many properties that make it a useful and interesting shape to study.

The sum of the interior angles of a triangle is always 180 degrees, which is a fundamental property of triangles.

Triangles also have many interesting properties related to their sides, angles, and areas. For example, the Pythagorean theorem states that in a right triangle, the sum of the squares of the lengths of the legs is equal to the square of the length of the hypotenuse. The area of a triangle can be calculated using the formula 1/2(base x height) or by using various trigonometric functions.

Triangles are important in many areas of mathematics and science, such as in geometry, trigonometry, calculus, and physics. They are also commonly used in architecture, engineering, and design.

If LMN and FGH are similar triangles, then the ratio of their areas is equal to the square of the ratio of their corresponding side lengths.

Let x be the ratio of LM to FG. Then the ratio of their areas is (x²).

So we have:

LMN / FGH = 18 / 32

(x²) = 18 / 32

x² = 9 / 16

x = (3 / 4)

Therefore, the ratio of LM to FG is 3:4, which is option A.

To know more about ratio visit:

https://brainly.com/question/21575

#SPJ9

So, the area of the figure is 54.5 square miles.

In mathematics, the area is the measurement of the size of a two-dimensional surface or region, usually expressed in square units. It is a quantity that expresses the extent of a two-dimensional shape or figure in a plane. The area of a figure is calculated by multiplying the length and width of the shape, in the case of a rectangle, or by using the appropriate formula for other shapes such as triangles, circles, or irregular polygons.

Here,

The area of rectangle R1 is:

Area of R1 = 5 mi x 2 mi

= 10 square miles

The area of rectangle R2 is:

Area of R2 = 2 mi x 14 mi

= 28 square miles

The area of the triangle TRI is:

Area of TRI = (1/2) x base x height

           = (1/2) x 11 mi x 3 mi

           = 16.5 square miles

Therefore, the total area of the figure is:

Area of figure = Area of R1 + Area of R2 + Area of TRI

              = 10 + 28 + 16.5

              = 54.5 square miles

To know more about area,

https://brainly.com/question/13194650

#SPJ1

We have confirmed that the sum of the series is 28/3. Therefore, the correct answer is option (b) 28/3.

A geometric series is a series of numbers where each term is a fixed multiple of the preceding term. Specifically, a geometric series has the form:

a+ar+ar²+ar³+.....

The given series is a geometric series with first term (a) = 14 and common ratio (r) = -1/2.

Consider sum of series be S, So-

S = a/(1 - r) = 14/(1 - (-1/2)) = 28/3

To see why this is the correct answer, we can also write out the first few terms of the series:

14-7+7/2-7/4+7/8-.....

It is evident that each term is produced by multiplying the one before it by -1/2.

So, the second term is obtained by multiplying the first term by -1/2, the third term is obtained by multiplying the second term by -1/2, and so on.

We can also notice that the sum of the first two terms is 7, the sum of the first three terms is 21/2, and the sum of the first four terms is 28/3. This suggests that the sum of the first n terms of the series might be given by the formula Sn = a(1 - rⁿ)/(1 - r).

We can verify that this is true by using the formula to find the sum of the first four terms:

S4 = 14(1 - (-1/2)⁴)/(1 - (-1/2)) = 28/3

To know more about common ratio visit:

https://brainly.com/question/24989238

#SPJ1

The guy wire must be about 55 feet long and the slope of the guy wire, expressed as a fraction is 25/11.

We can use the Pythagorean Theorem to find the length of the guy wire. Let's call the length of the guy wire "g".

g^2 = 50^2 + 22^2

g^2 = 2500 + 484

g^2 = 2984

g ≈ 54.65

So the guy wire must be about 55 feet long.

The slope of the guy wire is the ratio of the vertical distance it covers to the horizontal distance it covers. In this case, the vertical distance is 50 feet (the height of the pole) and the horizontal distance is 22 feet. So the slope is

50/22 = 25/11

Therefore, the slope of the guy wire is 25/11.

To know more about guy wire here

https://brainly.com/question/15504383

#SPJ4

The total cups of milk orange juice Enrique has in refrigerator is equal to  18 cups.

Gallons of milk Enrique has in his refrigerator = 1 gallon

Pint of orange juice Enrique has in his refrigerator = 1 pint

Convert gallons to cups and pint to cups .

There are ,

16 cups = 1 gallon of milk

And 2 cups = 1 pint of orange juice

Enrique has 16 cups of milk

and 2 cups of orange juice.

Total cups of milk and orange juice in refrigerator

=16 cups of milk + 2 cups of orange juice

= 18 cups of milk and orange juice

Therefore, in total Enrique has  18 cups of liquid in his refrigerator.

Learn more about cups here

brainly.com/question/22334258

#SPJ4

Answer:

hope this helps

Step-by-step explanation:

The expression for V(t), the value of Rick's snowmobile, in dollars, after t years can be given by:

V(t) = $10,500 * (1 - 0.14)^t

Simplifying this expression, we get:

V(t) = $10,500 * 0.86^t

So, the required expression for V(t) is:V(t) = 10,500 * 0.86^t

A possible story of the graph would be about a student going to school for an important event.

One day, a student named Alex had to go to school for an important event. The graph represents Alex's journey to and from school, with the horizontal axis representing time and the vertical axis representing the distance from school.

In the morning, Alex left home (time = 0, distance = 0) and began walking to school. The line on the graph climbs gradually, indicating that Alex was steadily covering the distance to school. Upon reaching school, Alex attended the important event, which lasted for a certain amount of time. During this period, the line on the graph remains flat.

Once the event was over, Alex began their journey back home. The line on the graph starts to decrease gradually until Alex arrived back home, ending up at a distance of zero from the school.

Find out more on graphs at https://brainly.com/question/31337520

#SPJ1

Answer:

26) 1.32

27) 90

28) 0.00845

29) 2.56x10^-1

30) 9.5x10^-3

31) 7.8x10

Answer:

5.5

Step-by-step explanation:

x＋3＝8.5

or，x＝5.5

I hope it helped you

Please Mark me brainliest

The average value of the function f(x,y) = sin(x+y) over the rectangle 0 ≤ x ≤ π/3, 0 ≤ y ≤ 5π/3 is -27√(3) / (40π^2).

To find the average value of the function ​f(x,y)=sin(x+y) over the given rectangle, we need to integrate the function over the rectangle and then divide by the area of the rectangle.

So, we have:

average value of f(x,y) = (1/Area of rectangle) × double integral of f(x,y) over the rectangle

where the limits of integration are

0 ≤ x ≤ π/3

0 ≤ y ≤ 5π/3

The area of the rectangle is

Area = (π/3 - 0) × (5π/3 - 0) = 5π^2 / 9

Now, we can integrate the function f(x,y) over the rectangle

double integral of f(x,y) over the rectangle = integral from 0 to π/3 of integral from 0 to 5π/3 of sin(x+y) dy dx

= [tex]\int\limits^{\pi /3}_0[/tex] [-cos(x+y)] evaluated from y=0 to y=5π/3 dx

= [tex]\int\limits^{\pi /3}_0[/tex] [-cos(x+5π/3) + cos(x)] dx

= [tex]\int\limits^{\pi /3}_0[/tex]  [-1/2cos(x) - 1/2cos(x+π/3)] dx

= [-1/2sin(x) - 1/4sin(x+π/3)] evaluated from x=0 to x=π/3

= [-1/2sin(π/3) - 1/4sin(2π/3)] - [-1/2sin(0) - 1/4sin(π/3)]

= (-√(3)/4) - (1/4 × √(3)/2) = -3sqrt(3)/8

Therefore, the average value of f(x,y) over the rectangle is

average value of f(x,y) = (1/Area of rectangle) × double integral of f(x,y) over the rectangle

= (-3sqrt(3)/8) / (5π^2 / 9)

= -27sqrt(3) / (40π^2)

Learn more about average value here

brainly.com/question/22847740

#SPJ4

The given question is incomplete, the complete question is:

Find the average value of ​f(x,y)=sin(x+y) over the rectangle 0≤x≤π/3​, 0≤y≤5π/3.