Be sure to answer all parts. Drinking water is often disinfected with cl2, which hydrolyzes to form hclo, a weak acid but powerful disinfectant: cl2(aq) + 2 h2o(l) longrightarrow hclo(aq) + h3o+(aq) + cl−(aq) the fraction of hclo in solution is defined as [hclo] [hclo] + [clo−]

The concentration of the solution is approximately 5,556 ppm of fluoride in the tap water.

To calculate the concentration of a solution in parts per million (ppm), you need to know the mass of the solute (in milligrams) and the volume of the solution (in milliliters).

Given: Mass of fluoride (solute) = 0.35 mg, Volume of tap water (solution) = 63 ml

The formula to calculate concentration in ppm is:

Concentration (ppm) = (Mass of solute / Volume of solution) x 1,000,000

1. Convert the mass of fluoride to grams: 0.35 mg = 0.00035 g
2. Convert the volume of tap water to liters: 63 mL = 0.063 L
3. Calculate the concentration in ppm using the formula: (mass of solute/volume of solution) x 1,000,000
4. Plug in the values: (0.00035 g / 0.063 L) x 1,000,000

Concentration (ppm) = 5,555.56 ppm (rounded to the nearest hundredth)

To know more about Concentration:

https://brainly.com/question/27347818

#SPJ11

According to the article published by J.D. Bauer et. al in 2010, the solvent used to grow the crystals of acetylsalicylic acid was ethanol.

The process of crystal growth involves dissolving the compound in a suitable solvent and then allowing it to slowly evaporate under controlled conditions to form well-defined crystals. Ethanol is a commonly used solvent for the growth of crystals due to its ability to dissolve a wide range of compounds, including organic molecules like acetylsalicylic acid.

The use of ethanol as a solvent for crystal growth of acetylsalicylic acid was carefully chosen to ensure that the crystals formed were of high quality and had a well-defined crystal structure. The crystal structure of acetylsalicylic acid is important because it determines the physical and chemical properties of the compound.

In conclusion, the use of ethanol as a solvent for the growth of acetylsalicylic acid crystals was a crucial step in the determination of the crystal structure of this important compound. The choice of solvent is an important factor to consider when growing crystals, as it can greatly affect the quality and properties of the crystals formed.

Know more about   ethanol   here:

https://brainly.com/question/281073

#SPJ11

The correct option is D. A gas is released and a black solid forms.

Carbon, hydrogen, and oxygen atoms make up sugar. When heated over a candle, these materials react with the fire and turn into liquids. Heat causes the sugar's atoms to interact with the oxygen in the air, forming new atomic groups. Energy is released during this chemical reaction in the form of smoke and black soot.

The main functions of sugars include their ability to sweeten things, maintain and intensify flavours, act as antioxidants and preservatives, and interact with water to change how it behaves. Fermentation, caramelization, Maillard reactions, or the creation of browning compounds, are examples of chemical processes.

To know more about solid visit:-

https://brainly.com/question/17061172

#SPJ1

Question:

During a science class investigation, a teacher places a small amount of sugar in a beaker and then heats it over a candle. Which of the following would be the best evidence that a change in the chemical properties of the sugar has taken place?

A. The sugar changes color.

B. The sugar dissolves in the water.

C. The sugar melts and turns into a liquid.

D. A gas is released and a black solid forms.

the molar mass of the unknown acid is approximately 141.1 g/mol.

a. To find the number of moles of acid in the solid sample, we first need to calculate the number of moles of NaOH used in the titration. We can do this using the equation:

moles NaOH = M NaOH x V NaO

where M NaOH is the molarity of the NaOH solution, and V NaOH is the volume of NaOH solution used at the equivalence point.

Substituting the given values, we get

moles NaOH = 0.300 mol/L x 0.04873 L = 0.014619 mol

Since NaOH and the unknown acid react in a 1:1 mole ratio, the number of moles of acid in the sample is also 0.014619 mol.

b. To find the molar mass of the unknown acid, we can use the equation

molar mass = mass of sample / number of moles of acid

Substituting the given values, we get:

molar mass = 2.06 g / 0.014619 mol = 141.1 g/mol

Learn more about molar  here:

https://brainly.com/question/8732513

#SPJ11

The number of moles in the acid is 0.014619 moles and the molar mass of the unknown monoprotic acid is 140.92 g/mol.

To find the number of moles of acid in the solid sample, first determine the moles of NaOH used in the titration. You can do this using the formula:

moles = volume (L) × concentration (M)
moles of NaOH = 48.73 mL × (1 L / 1000 mL) × 0.300 M = 0.014619 moles

Since it's a monoprotic acid, the moles of the acid are equal to the moles of NaOH at the equivalence point:
moles of acid = 0.014619 moles

b. To find the molar mass of the unknown acid, use the formula:

molar mass = mass of the sample (g) / moles of the acid
molar mass = 2.06 g / 0.014619 moles = 140.92 g/mol

So, the molar mass of the unknown monoprotic acid is approximately 140.92 g/mol.

To know more about Molar Mass:

https://brainly.com/question/29509963

#SPJ11

Answer: option C

Explanation: As they belong to same group

The number of moles of the gas is about 1.37 moles.

The ideal gas equation relates the pressure, volume, temperature, and number of moles of an ideal gas in a closed system. The gas constant (R) is a proportionality constant that relates these four variables.

It is important to note that the ideal gas equation is only applicable to ideal gases, which are hypothetical gases that obey certain assumptions such as having no intermolecular forces and occupying no volume. Real gases deviate from these ideal behaviors under certain conditions, and thus the ideal gas equation may not accurately describe their behavior.

Knowing that;

PV = nRT

n = PV/RT

n = 1.35 * 25/0.082 * 300

n = 33.75/24.6

n = 1.37 moles

Learn more about ideal gas equation:https://brainly.com/question/28837405

#SPJ1

The enthalpy of the reaction as seen from the calculations is - 137.2 kJ/mol.

To determine the enthalpy change of a reaction, we need to know the difference between the enthalpy of the products and the enthalpy of the reactants. This difference is known as the enthalpy change or the heat of reaction.

The enthalpy change of a reaction can be calculated using the following formula:

ΔH = ΣnΔHf(products) - ΣmΔHf(reactants)

where ΔH is the enthalpy change of the reaction, n and m are the stoichiometric coefficients of the products and reactants, respectively, and ΔHf is the standard enthalpy of formation of the species.

Enthalpy of reaction = Enthalpy of products - Enthalpy of reactants

(-84.7) -(52.5 + 0)

- 137.2 kJ/mol

Learn more about enthalpy change:https://brainly.com/question/29556033

#SPJ1

The respiratory disease characterized by decreased chloride ion diffusion out of cells and dehydrated respiratory secretions is cystic fibrosis. Option C is correct.

Cystic fibrosis is a genetic disorder that affects the exocrine glands, including those in the lungs, pancreas, and sweat glands. The condition causes a thick and sticky mucus to build up in the lungs, making breathing difficult and increasing the risk of respiratory infections.

The decreased chloride ion diffusion out of cells is due to a defect in the cystic fibrosis transmembrane conductance regulator (CFTR) protein, which is responsible for controlling the movement of salt and water in and out of cells. This results in dehydrated respiratory secretions, as well as thick and sticky mucus in other organs. While there is no cure for cystic fibrosis, treatment focuses on managing symptoms and preventing complications. Hence Option C is correct.

To learn more about cystic fibrosis, here

https://brainly.com/question/30754172

#SPJ4

So, at STP, there are around 891 grammes of nitrogen gas in every 759 litres.

The two stable isotopes of naturally occurring nitrogen (7N) are nitrogen-14 and nitrogen-15, with nitrogen-14 constituting 99.6% of all naturally existing nitrogen. Along with one nuclear isomer, 11mN, fourteen radioisotopes with atomic masses ranging from 10 to 25 are also known.

Assuming "ST" refers to standard temperature and pressure (0°C and 1 atm), we can use the ideal gas law to calculate the mass of nitrogen gas:

PV = nRT

where n is the number of moles, P is the pressure, V is the volume, and T is the temperature, and R is the gas constant.

The temperature and pressure are 273.15 K and 1 atm, respectively, at STP.

To solve for n, the number of moles, we can rearrange the ideal gas law equation as follows:

n = PV / RT = (1 atm) * (759 L) / (0.0821 L·atm/(mol·K) * 273.15 K) = 31.8 mol

Now we can calculate the mass of nitrogen gas:

mass = n * molar mass = 31.8 mol * 28.01 g/mol ≈ 891 g.

To know more about nitrogen gas visit:-

https://brainly.com/question/13907528

#SPJ1

Levulinic acid can be produced from various reactants, including biomass and sugars such as glucose, fructose, and sucrose.

The following combination of reactants could be used to produce levulinic acid:

However, in terms of the tobacco industry, levulinic acid is commonly produced from tobacco leaves themselves. The leaves are subjected to a process called acid hydrolysis, which breaks down the cellulose and hemicellulose in the plant material into sugars. These sugars are then used as reactants in the production of levulinic acid, which is used to make nicotine more addictive.

Levulinic acid is used by the tobacco industry to make nicotine more addictive by converting it into a more stable and absorbable form. It is important to note, however, that nicotine addiction is a serious health concern and should be addressed through education and smoking cessation programs rather than through the manipulation of nicotine chemistry.

Learn more about acid hydrolysis here:

https://brainly.com/question/29622274

#SPJ11

Kinetic molecular theory says that as water molecules absorb energy, their motion and temperature increase and the sample becomes warm

The average kinetic energy of the molecules will rise as the temperature rises, according to the kinetic molecular theory. The edge of the container will probably be more frequently struck by the particles as they travel more quickly.

The average molecular velocity of a gas increases as its temperature rises; for example, doubling the temperature will result in a four-fold increase in molecular velocity. More momentum and kinetic energy will be transferred to the container's walls in collisions with them.

learn more about kinetic molecular theory

https://brainly.com/question/134712

#SPJ1

The number of moles of caffeine is 0.00052 mol

To calculate the number of moles of caffeine in a 100 mg sample, we need to use the formula:

The molar mass of caffeine (C₈H₁₀O₂N₄) is 194.19 g/mol. Converting the mass of the sample to grams (100 mg = 0.1 g), we can plug in the values and solve for moles:

The mole is widely used in stoichiometry calculations, which involve determining the amount of reactants needed to produce a certain amount of products or the amount of products produced from a certain amount of reactants. It is also used in the calculation of molar mass, which is the mass of one mole of a substance, and in the conversion between mass, moles, and number of entities in chemical reactions. Therefore, the number of moles of caffeine in a 100 mg sample of caffeine is 0.00052 moles.

To learn more about moles, here

https://brainly.com/question/26416088

#SPJ4

a. Glucose, C6H12O6, is best described as a carbohydrate compound.

b. The statement that is NOT a property of water is "It is denser when frozen than when liquid." Option 1 is the correct answer.

Carbohydrates are organic compounds composed of carbon, hydrogen, and oxygen atoms in a ratio of approximately 1:2:1.

In fact, water is less dense when frozen than liquid, which is why ice floats on liquid water.

This is due to the unique property of water in which its molecules form a crystal lattice structure when frozen, which causes them to be more spread out and less dense than in the liquid state.

This property is important in aquatic ecosystems as it allows ice to float on top of bodies of water, preventing them from freezing solid and allowing life to continue below the surface.

Learn more about glucose at

https://brainly.com/question/30548064

#SPJ4

The question is -

Answer the following questions -

a. Glucose, C6H12O6, is best described as a(n) ______. compound.

b. Which of the following is NOT a property of water?

Options are -

1. It is denser when frozen than when liquid.

2. It is denser when gaseous than when liquid.

3. It is lighter when frozen than when liquid.

a. Glucose, C6H12O6, is best described as a carbohydrate compound.

b. The statement that is NOT a property of water is "It is denser when frozen than when liquid." Option 1 is the correct answer.

Carbohydrates are organic compounds composed of carbon, hydrogen, and oxygen atoms in a ratio of approximately 1:2:1.

In fact, water is less dense when frozen than liquid, which is why ice floats on liquid water.

This is due to the unique property of water in which its molecules form a crystal lattice structure when frozen, which causes them to be more spread out and less dense than in the liquid state.

This property is important in aquatic ecosystems as it allows ice to float on top of bodies of water, preventing them from freezing solid and allowing life to continue below the surface.

Learn more about glucose at

brainly.com/question/30548064

#SPJ4

3.29 grams of nitrogen dioxide must reaction  with water to produce 2.25 g of nitric acid According to the following equation,

When oxygen and nitrogen interact at high temperatures in the atmosphere, NO and NO2 are both produced. Both the emissions of power generation plants and the exhaust fumes from vehicles and trucks are significant sources of nitrogen oxides.

In the process of creating chemicals like nitric acid, that's utilized to create synthetic commercial fertiliser, and adipic acid, that's utilized to create fibres like nylon and other synthetic items, nitrous oxide is produced as a byproduct. Waste.

To know more about reaction visit:

https://brainly.com/question/28984750

#SPJ1

Answer:

They're equal.

Explanation:

Giving an idea let's use the question:

This would depend on the temperature and pressure conditions that the helium gas is being stored under.

You see, gases have no fixed volume. They will expand when the temperature increases and/or the applied pressure decreases. On the other hand, the gas will contract when cooled or pressure is applied. So one mole of helium could occupy almost any volume, depending on how much you compress it or how cool you keep it.

However, if your helium gas is stored under standard temperature and pressure conditions (STP)(0 C and 101.3 kPa), then it would fill a box with a volume of 22.4 L. This volume is known as the standard molar volume and is the same for any gas at STP.

I will let you come up with a set of dimensions for a box that could satisfy this volume.

True. 1-octanol is a combustible liquid with a flashpoint of 86°C and an auto-ignition temperature of 258°C, according to the provided SDS.

The SDS (Safety Data Sheet) for 1-octanol indicates that it is a combustible liquid. According to the SDS, 1-octanol has a flashpoint of 86°C (187°F) and an auto-ignition temperature of 258°C (496°F). These values suggest that 1-octanol can easily ignite in the presence of an ignition source and may burn at relatively low temperatures. Additionally, the SDS provides information on the fire and explosion hazards associated with 1-octanol and recommends appropriate handling procedures and precautions to minimize the risk of fire or explosion. Therefore, it is important to handle 1-octanol with care and follow appropriate safety protocols when working with this substance.

To learn more about combustible liquid, refer:

https://brainly.com/question/28222891

#SPJ4

The complete question is:

the SDS for 1-octanol is provided here. (links to an external site.) is 1-octanol a combustible liquid? True or False.

options (a) and (c) are true, and option (b) is false. To solve this problem, we need to rewrite the given equation of the circle in standard form by completing the square.

x² + y² – 2x – 8 = 0

x² – 2x + y² = 8

(x – 1)² + y² = 9

Now, we can see that the center of the circle is (1, 0) and the radius is 3. Therefore, the following statements are true:

The radius of the circle is 3 units.

The center of the circle does not lie on the y-axis.

The standard form of the equation is (x – 1)² + y² = 9.

So, options (a) and (c) are true, and option (b) is false.

Regarding the last option (e), the equation x² + y² = 9 represents a circle with a center at the origin (0,0) and a radius of 3. Since the radius of the given circle is also 3, we can say that the two circles have the same radius, but the centers are different.

To know more about radius, visit:

https://brainly.com/question/13449316

#SPJ1

To solve this problem, we can use the combined gas law formula, which is (P1 * V1) / T1 = (P2 * V2) / T2. Given the initial and final conditions of ozone gas, we need to find the pressure (P2) at 625 mL and 25°C.

Initial conditions:
P1 = 1.00 atm
V1 = 225 mL
T1 = 0°C + 273.15 = 273.15 K (convert to Kelvin)

Final conditions:
V2 = 625 mL
T2 = 25°C + 273.15 = 298.15 K (convert to Kelvin)
P2 = ? (This is the pressure we need to find)

Using the combined gas law formula, we get:

(1.00 atm * 225 mL) / 273.15 K = (P2 * 625 mL) / 298.15 K

Now, solve for P2:

P2 = (1.00 atm * 225 mL * 298.15 K) / (273.15 K * 625 mL)
P2 ≈ 0.659 atm

The pressure of the ozone gas at 625 mL and 25°C is approximately 0.659 atm.

Visit here to learn more about gas law   : https://brainly.com/question/27009857
#SPJ11

The solubility product constant (Ksp) is a measure of the solubility of a sparingly soluble salt. A larger Ksp value indicates a higher solubility of the salt in water.

Comparing the Ksp values given, we can see that [tex]PbCl_{2}[/tex] has the largest Ksp value (1.6 x [tex]10^-5[/tex] ) among the three lead salts. This means that [tex]PbCl_{2}[/tex] has the highest solubility among the three salts at 25 degrees Celsius.

On the other hand, Pbi2 has a much smaller Ksp value (1.4 x 10^-8), indicating that it has a much lower solubility in water at 25 degrees Celsius. [tex]Pb(OH)_{2}[/tex] has an even smaller Ksp value (1.2 x 10^-15), making it the least soluble of the three salts.

It is important to note that factors such as temperature, pressure, and pH can also affect the solubility of a salt. However, based on the given information, we can conclude that [tex]PbCl_{2}[/tex] would be the most soluble of the three lead salts in water at 25 degrees Celsius.

Learn more about  Ksp value

https://brainly.com/question/13032436

#SPJ4

ΔHrxn and ΔHf are measured by heat transfer in experiments. ΔHrxn measures enthalpy change per mole of a reaction, while ΔHf measures heat released when one mole of a compound forms from its elements in standard states. Experimentally, ΔHrxn measures change in enthalpy per mole of a reaction and ΔHf measures standard molar enthalpy of formation.

ΔHrxn is the change in enthalpy of a chemical reaction, which is measured at constant pressure and can be either endothermic (positive ΔHrxn) or exothermic (negative ΔHrxn).

ΔHf, on the other hand, is the standard molar enthalpy of formation, which is the enthalpy change that occurs when one mole of a compound is formed from its constituent elements in their standard states (most stable form at standard temperature and pressure).

In an experiment to measure ΔHrxn, the enthalpies of the reactants and products are measured directly and the difference is calculated. This can be done using calorimetry, where the heat transfer of the reaction is measured using a calorimeter. In an experiment to measure ΔHf, the enthalpy of a single reaction is measured and the number of moles of reactants used is known.

The part of the experiment that demonstrates the change in enthalpy per mole of a reaction would be the part where the enthalpy change is measured directly, which is used to calculate ΔHrxn. The part of the experiment that demonstrates the standard molar enthalpy of formation for a reaction would be the part where the number of moles of reactants used is known and the initial and final masses of the reactants and products are measured, which is used to calculate ΔHf.

To know more about enthalpy, here

brainly.com/question/13996238

#SPJ4

--The complete question is, What is the difference between ΔHrxn and ΔHf, and how are they measured experimentally? In an experiment to measure the enthalpy change of a reaction and the standard molar enthalpy of formation, which parts of the experiment would demonstrate each of these quantities?--

Approximately 50 grams mass of [tex]KNO_{3}[/tex] will dissolve in 50 mL of water at 60°C.

What is mass?

Mass is a fundamental physical quantity that refers to the amount of matter in an object. It is a scalar quantity that measures the inertia of an object.

The solubility of  [tex]KNO_{3}[/tex] in water depends on temperature. At 60°C, the solubility of  [tex]KNO_{3}[/tex] is approximately 100 g/100 mL of water.

To determine the mass of  [tex]KNO_{3}[/tex] that will dissolve in 50 mL of water at 60°C, we can use the following equation:

mass of  [tex]KNO_{3}[/tex]  = (solubility of [tex]KNO_{3}[/tex]  at 60°C) × (volume of water)

mass of [tex]KNO_{3}[/tex]  = (100 g/100 mL) × (50 mL)

mass of [tex]KNO_{3}[/tex]  = 50 g

Therefore, approximately 50 grams of  [tex]KNO_{3}[/tex] will dissolve in 50 mL of water at 60°C.

What is solubility?

Solubility is the ability of a substance, called the solute, to dissolve in a solvent to form a homogeneous solution. The solubility of a substance depends on the nature of the solute, the solvent, and the conditions under which the solution is formed, such as temperature, pressure, and concentration.

The amount of solute that can dissolve in a given amount of solvent at a particular temperature and pressure is known as the solubility of the solute. Solubility is typically expressed in units of mass per unit volume, such as grams per liter (g/L) or moles per liter (mol/L).

The solubility of a substance can vary widely depending on the solvent. For example, water is a good solvent for many ionic and polar compounds, while nonpolar solvents like benzene and hexane are better at dissolving nonpolar substances like oils and fats.

To know more about solubility, visit:

https://brainly.com/question/26766449

#SPJ1

Complete question is: 50 grams mass of [tex]KNO_{3}[/tex] will dissolve in 50 mL of water at 60°C.

Answer:

The base dissociation constant for the equation is Kb= [BH][OH-]
                                                                                           -------------------
                                                                                                  [B]

Explanation:

Base dissociation constant,  exists when a weak base is dissolved in water. It is expressed as the ratio of molar concentration of the products and the molar concentration of the reactants raised to power their respective stoichiometric coefficients.

Aii. The percentage abundance of each isotopes are:

Isotopes of an element is defined as the atoms of the element having the same number of protons but different neutron number

The percentage abundance of each isotope can be obtain as illustrated below:

Average atomic mass = [(Mass of 1st × 1st%) / 100] + [(Mass of 2nd × 2nd%) / 100]

10.81 = [(10 × A) / 100] + [(11 × (100 - A) / 100]

10.81 = 0.1A + 11 - 0.11A

Collect like terms

10.81 - 11 = 0.1A - 0.11A

-0.19 = -0.01A

Divide both sides by -0.01

A = -0.19 / -0.01

Abundance of 1st isotope, ¹⁰B = 19%

Abundance of 2nd isotope, ¹¹B = 100 - A

Abundance of 2nd isotope, ¹¹B = 100 - 19

Abundance of 2nd isotope, ¹¹B = 81%

Learn more about percentage abundance of isotope:

https://brainly.com/question/11026801

#SPJ1

The molar concentration of chloride ions in the solution is 0.3169 mol/L

To find the molar concentration of chloride ions in the solution, we need to consider the mole-to-ion ratio of iron(III) chloride (FeCl₃) and then use the volume of the solution.

1 mole of FeCl₃ dissociates into 3 moles of chloride ions (Cl⁻) in solution. So, for 0.0507 moles of FeCl₃, the number of moles of Cl⁻ ions will be:

0.0507 moles FeCl₃ × (3 moles Cl⁻ / 1 mole FeCl₃) = 0.1521 moles Cl⁻

Now, we have 480 milliliters of solution, which is equivalent to 0.480 liters. To find the molar concentration of chloride ions, divide the moles of Cl⁻ by the volume of the solution in liters:

0.1521 moles Cl⁻ / 0.480 L = 0.3169 mol/L

So, the molar concentration of chloride ions in the solution is 0.3169 mol/L.

Know more about   molar concentration   here:

https://brainly.com/question/26255204

#SPJ11

The temperature of the sample of gas is 432.45 °C.

What is temperature?

We can use the ideal gas law, which states:

PV = nRT

where:

P = pressure (in atm)

V = volume (in L)

n = number of moles

R = gas constant (0.0821 L·atm/(mol·K))

T = temperature (in K)

First, we need to convert the given volume to liters (since the unit of R is in L).

75.71 L = 75.71 L

Next, we can substitute the given values into the ideal gas law and solve for T:

2.68 atm x 75.71 L = 3.50 mol x 0.0821 L·atm/(mol·K) x T

202.6328 L·atm = 0.28735 mol·K·T

T = (202.6328 L·atm) / (0.28735 mol·K) = 705.6 K

Finally, we can convert the temperature from Kelvin to Celsius by subtracting 273.15:

T = 705.6 K - 273.15 = 432.45 °C

Therefore, the temperature of the sample of gas is 432.45 °C.

What is ideal gas law?

The ideal gas law is a fundamental principle in physics and chemistry that describes the behavior of a hypothetical ideal gas. The ideal gas law is expressed mathematically as:

PV = nRT

The ideal gas law describes the relationship between the pressure, volume, temperature, and number of moles of an ideal gas. An ideal gas is a theoretical gas composed of a large number of randomly moving particles that do not interact with one another, except through perfectly elastic collisions. In reality, no gas behaves exactly like an ideal gas, but many gases behave approximately like an ideal gas under certain conditions.

To know more about temperature, visit:

https://brainly.com/question/31084622

#SPJ1

The spectrum from an incandescent light bulb with a filament is a continuous spectrum. This means that the light emitted contains all colors of the visible spectrum, appearing as a smooth, uninterrupted rainbow

Electrons in an atom can only gain energy by leaving the atom and creating an ion. They can move between discrete energy levels or escape the atom if given enough energy. Electrons can have any energy below the ionization energy within the atom or escape if given enough energy.

However, electrons can have any energy within the atom and cannot be given enough energy to cause them to escape the atom. They move between discrete energy levels within the atom and cannot accept an amount of energy that causes them to escape the atom.

In contrast, an emission line spectrum appears as a series of bright lines against a dark background, while an absorption line spectrum appears as a series of dark lines against a bright background.

The type of spectrum emitted depends on the source of the light and the composition of the material emitting the light.

To learn more about : spectrum

https://brainly.com/question/2187993

#SPJ11

The atomic models does the Rutherford’s experimental evidence as the support is the Bohr's model.

The Rutherford's theory plays the role upon which the Bohr's model is explained. The Rutherford describes the fact at which the center of the atom, and there is the nucleus and whose radius will be the smaller than that of the radius of the atom. The nucleus is the positively charged and the most of  mass of the atom are concentrated in it. The Electrons revolves round this nucleus in the orbits.

The experimental evidences that of the Bohr's model which shows that the Rutherford's model was the fundamentally correct.

To learn more about atomic models here

https://brainly.com/question/11776177

#SPJ4

Container | Bodies | Cylinders | Tires | Engines | Max. Number of Completed Cars | Limiting Part

A | 3 | 10 | 9 | 2 | 2 | Engines

B | 50 | 12 | 50 | 5 | 2 | Cylinders

C | 16 | 16 | 16 | 16 | 2 | Cylinders

D | 4 | 9 | 16 | 6 | 1 | Engines

E | 20 | 36 | 40 | 24 | 4 | Engines

8. For container B, the limiting part is the cylinders, since only 12 cylinders are available and each car requires 8 cylinders. Therefore, the maximum number of complete cars that can be built is 12/8 = 1.5, or 1 car.

For container C, all parts are equal and no part limits the number of cars that can be built. The maximum number of complete cars that can be built is limited by the number of cylinders, which is 16. Each car requires 8 cylinders, so we can make a maximum of 16/8 = 2 complete cars.

For container D, the limiting part is the engines, since only 6 engines are available and each car requires 1 engine. Therefore, the maximum number of complete cars that can be built is 6.

For container E, the limiting part is the engines, since only 24 engines are available and each car requires 1 engine. Therefore, the maximum number of complete cars that can be built is 24.

Each group member should show their work for the container(s) they were responsible for and explain how they determined the limiting part.

9. a. To determine the number of race cars the Zippy Race Car Company can build, we need to find the limiting part. Since the inventory of each part is given in "oodles," we don't need to know the exact number of parts in an oodle to determine which part is limiting.

We can see that we have enough bodies and tires to build more than 8 oodles of cars, but we only have enough cylinders to build 5 oodles and enough engines to build 8 oodles. Therefore, the limiting part is the cylinders, and the maximum number of complete cars that can be built is 5 oodles.

b. It is not necessary to know the number of parts in an "oodle" because we are only comparing the quantities of each part to determine which one is limiting. The actual number of parts in an oodle doesn't matter as long as we know the relative quantities of the parts.

10. No, the component with the smallest number of parts is not always the one that limits production. In Question 8, for example, container C has an equal number of each part, but the number of cylinders limits production. It depends on the ratio of the quantities of each part needed to make a complete product, as well as the total quantity of each part available.

Find out more on limiting reagents here: https://brainly.com/question/14222359

#SPJ1