Boric acid (H3BO3) dissociates in water following the reaction: H3BO3 ⟷ H+ + H2BO3-. You dissolve a certainamount of H3BO3 in pure water, creating an aqueous solution. You are able to measure the undissociated fraction (i.e., H3BO3), and you find it has a concentration [H3BO3] = 16 mmol m-3. You also measure pH, and realize that the solution has remained perfectly neutral (pH = 7). [You can ignore the second and third dissociations of H3BO3 for this problem.](a) Determine if H3BO3 is a strong or weak acid. To do so, calculate the dissociation constant Ka, and determine whether pKa>2 or not. [2 points]

At approximately 437 Kelvin, the vapor pressure will be 5.00 times higher than it was at 299 K.

To determine the Kelvin temperature at which the vapor pressure will be 5.00 times higher than it was at 299 K, we can use the Clausius-Clapeyron equation, which relates the vapor pressure of a substance to its temperature and heat of vaporization.

The Clausius-Clapeyron equation is given by:

ln(P₂/P₁) = -(ΔHvap/R) * (1/T₂ - 1/T₁)

Where:

P₁ is the initial vapor pressure,

P₂ is the final vapor pressure (5.00 times higher than P₁),

ΔHvap is the heat of vaporization (50.39 kJ/mol),

R is the gas constant (8.314 J/(mol·K)),

T₁ is the initial temperature (299 K),

T₂ is the final temperature (unknown).

Rearranging the equation to solve for T₂, we have:

ln(P₂/P₁) = -(ΔHvap/R) * (1/T₂ - 1/T₁)

(1/T₂ - 1/T₁) = -(R/ΔHvap) * ln(P₂/P₁)

1/T₂ = (R/ΔHvap) * ln(P₂/P₁) + 1/T₁

T₂ = 1 / ((R/ΔHvap) * ln(P₂/P₁) + 1/T₁)

Now, let's plug in the given values and calculate T₂:

P₁ = vapor pressure at 299 K

P₂ = 5.00 * P₁ (5.00 times higher than P₁)

ΔHvap = 50.39 kJ/mol

R = 8.314 J/(mol·K)

T₁ = 299 K

T₂ = 1 / ((8.314 J/(mol·K) / (50.39 kJ/mol)) * ln(5.00) + 1/299 K)

Converting kJ to J and performing the calculations:

T₂ ≈ 1 / ((8.314 J/(mol·K) / (50.39 * 10^3 J/mol)) * ln(5.00) + 1/299 K)

T₂ ≈ 437 K

Therefore, at approximately 437 Kelvin, the vapor pressure will be 5.00 times higher than it was at 299 K.

Learn more about Vapor pressure, here:

https://brainly.com/question/29640321

#SPJ12

Answer:

False, it only rots

Explanation:

Answer: The answer is false

We know that wood is insoluble as trees take in water through roots into the trunk. Therefore, water is insoluble in water. Note: Polymers are defined as materials that consist of repeating large molecules.

Explanation: Hope this helps!! :)) Have a great spring break!!

Mark me brainliest!! :))

The volume of titrant needed to reach the equivalence point is 15 mL.

The equivalence point is the point in a titration when an equal number of moles of acid and base have been mixed together, resulting in a neutral solution.

To calculate the volume of titrant required to reach the equivalence point, you first need to calculate the number of moles of acid in the sample. This can be done using the formula:

moles of acid = (concentration of acid)(volume of acid). In this case, the number of moles of acid is (0.20 M)(15.0 mL) = 3.0 moles.

Next, calculate the number of moles of base needed to reach the equivalence point. Consider the balanced chemical reaction between the acid and the base. Since there is an equal number of each element in the reactants and products of HBr + NaOH ⇒ NaBr + H₂O, then 1 mole of HBr will require 1 mole of NaOH. Hence, moles of base = moles of acid. In this case, 3.0 moles of base are needed.

Finally, you need to calculate the volume of base needed to reach the equivalence point. This can be done using the formula:

volume of base = (moles of base)(volume of titrant). In this case, the volume of titrant needed is (3.0 moles)/(0.20 M) = 15 mL.

Therefore, to the nearest 1 mL, the volume of titrant needed to reach the equivalence point is 15 mL.

Learn more about equivalence point here: https://brainly.com/question/23502649.

#SPJ11

Answer:

(C) AH < 0 and AS > 0

When the equilibrium constant is greater than 1.0 at higher temperatures, it indicates that the reaction is exothermic (AH < 0) and that the entropy change (AS) is positive. At lower temperatures, the equilibrium constant is less than 1.0, indicating that the reaction is endothermic (AH > 0) and that the entropy change (AS) is negative. Therefore, the correct answer is (C) AH < 0 and AS > 0.

Based on the given information, we can conclude that AH <0 and AS > 0. Therefore, option C is correct.

The equilibrium constant (K) for a reaction can be expressed in terms of the standard free energy change (∆G°), standard enthalpy change (∆H°), and standard entropy change (∆S°) as follows:

K = e^(-∆G°/RT) = e^(-∆H°/RT) * e^(∆S°/R)

where R is the gas constant and T is the temperature in Kelvin.

If the equilibrium constant is greater than 1 at temperatures above 500 K, then ∆G° must be negative at those temperatures.

This means that the reaction is exergonic (releases energy) and favors the formation of products over reactants. Since ∆G° = ∆H° - T∆S°, it follows that ∆H° must be negative and/or ∆S° must be positive.

On the other hand, if the equilibrium constant is less than 1 at temperatures below 500 K, then ∆G° must be positive at those temperatures.

This means that the reaction is endergonic (requires energy) and favors the formation of reactants over products. Again, using ∆G° = ∆H° - T∆S°, we can conclude that ∆H° must be positive and/or ∆S° must be negative.

Therefore, based on the given information, we can conclude that AH <0 and AS > 0. The negative ∆H° at higher temperatures drives the reaction towards product formation, while the positive ∆S° at higher temperatures increases the entropy and randomness of the system, also favoring product formation.

Find more on equilibrium constant:

https://brainly.com/question/10038290

#SPJ2

76.33 grams of NaCl were collected after experiment 1.306 mol were

produced.

Every material has a molecular weight of 6.023 x 10²³. It may be used to quantify the chemical reaction's byproducts. The symbol mol is used to identify the unit. The molecular formula is written out as follows.

Mass of material / mass of one mole equals the number of moles.

We need to know the molar mass of NaCl in order to compute the number of moles of NaCl created.

The atomic weights of sodium (Na) and chlorine together make up the molar mass of sodium chloride (Cl). Na has an atomic mass of 22.99 g/mol, while Cl has an atomic mass of 35.45 g/mol. As a result, NaCl's molar mass is:

Molar mass of NaCl

= (1 x atomic mass of Na) + (1 x atomic mass of Cl)

= (1 × 35.45 g/mol plus 1 x 22.99 g/mol)

= 58.44 g/mol

The mass of gathered NaCl may now be converted into moles using the molar mass:

Mass of NaCl divided by its molar mass yields moles of NaCl.

moles of NaCl = 76.33 g / 58.44 g/mol

moles of NaCl = 1.306 mol

As a result, the experiment generated 1.306 moles of NaCl.

To know more about Moles visit:

https://brainly.com/question/21323029

#SPJ1

When equal masses of baking soda react with vinegar, lemon juice, and lactic acid, lactic acid will produce the most gas.

Lactic acid is a weak acid that can be used to neutralize baking soda, producing the greatest amount of carbon dioxide gas. When baking soda is mixed with lactic acid, the reaction between the two creates carbon dioxide, a gas.

This reaction is an example of a neutralization reaction, which is when an acid and a base are combined to form a salt and water. When this happens, the acid releases gas, in this case, carbon dioxide.

As lactic acid is the weakest of the three, it will produce the most gas when it reacts with the baking soda.

To know more about neutralization reaction click on below link:

https://brainly.com/question/28970253#

#SPJ11

The IUPAC name for the compound 2-bromobutanal is 2-bromobutane-1-al.


The IUPAC name for the compound 3-bromobutanone is 3-bromobutane-1-one.  The IUPAC name for the compound 2-bromobutanone is 2-bromobutane-1-one. The IUPAC name for the compound 3-bromobutanal is 3-bromobutane-1-al.
The given compound is a ketone, identify the longest carbon chain that includes the carbonyl group, then change the -e ending of the corresponding alkane name to -one, which is the suffix for a ketone.

We can see that the carbonyl group is located at the second carbon atom of the parent chain, and the parent chain is the butane which has four carbon atoms. The name of this ketone is 2-bromobutanone because the bromine atom is bonded to the second carbon atom of the parent chain. Hence, the correct option is c. 2-bromobutanone.

Read more about carbonyl :

https://brainly.com/question/13564853

#SPJ11

Answer: Aliphatic compounds are defined as organic compounds that do not contain the benzene ring. They can be divided into three main types: alkanes, alkenes, and alkynes.

What are aliphatic compounds?

Aliphatic compounds are organic compounds that do not contain the benzene ring. Aliphatic compounds can be divided into three main types: alkanes, alkenes, and alkynes. Alkanes are hydrocarbons that contain only single bonds between carbon atoms.

Alkenes are hydrocarbons that contain at least one double bond between carbon atoms. Alkynes are hydrocarbons that contain at least one triple bond between carbon atoms. Aliphatic compounds can be either saturated or unsaturated.

Aliphatic compounds with only single bonds are saturated, whereas those with one or more double or triple bonds are unsaturated. Aromatic compounds are organic compounds that contain the benzene ring. They are unsaturated compounds because they contain alternating double bonds.

They are very stable and are found in many natural substances, such as essential oils, spices, and drugs. Aromatic compounds are also used in the production of plastics, dyes, and other industrial products.

Learn more about aliphatic compounds here:

https://brainly.com/question/29523472#




#SPJ11

To calculate the value of n, we need to use the Rydberg equation: 1/λ = R(1/n1^2 - 1/n2^2). In this equation, λ is the wavelength of the highest energy line (821 nm) and R is the Rydberg constant (1.097x10^7 m^-1). Solving the equation for n1 yields a value of n1 = 3.863.

This value of n1 indicates that the highest energy line of atomic hydrogen will have a wavelength of 821 nm. This is because the Rydberg equation is used to calculate the wavelength of spectral lines in an emission spectrum, with higher values of n producing shorter wavelengths and lower values of n producing longer wavelengths. Therefore, a value of n1 = 3.863 will produce a series of lines with a highest energy line of 821 nm.

Know more about Rydberg equation here

https://brainly.com/question/28304174#

#SPJ11

Answer: It takes 92.4 s for the concentration of the reactant in the reaction to fall to one-sixteenth of its initial value.

The first-order reaction has a half-life of 23.1 s, which means that it takes 23.1 s for the concentration of the reactant to decrease to half of its initial value. Since the concentration needs to be reduced to one-sixteenth of its initial value, it will take four half-lives of the reaction, or 92.4 s in total.

This can be mathematically shown using the formula of a first-order reaction:

[A]t = [A]0 X e^(-kt)

Where:
[A]t is the concentration of the reactant at time t
[A]0 is the initial concentration of the reactant
k is the rate constant of the reaction

To calculate the time required for the concentration to fall to one-sixteenth of its initial value, the equation can be rearranged as:

t = -(1/k)ln([A]t/[A]0)

By substituting the values of the half-life, initial concentration, and the desired concentration, we can calculate the time required for the concentration of the reactant to reduce to one-sixteenth of its initial value.

Therefore, it takes 92.4 s for the concentration of the reactant in the reaction to fall to one-sixteenth of its initial value.


Learn more about concentration here:

https://brainly.com/question/10725862#


#SPJ11

If a chemical spill occurs in the lab, the best step to take is to quickly rinse the area with as much cool water as possible. A chemical spill can lead to harmful chemical exposure, and the best way to avoid exposure is to act fast and neutralize the spill.

Chemical spills can occur anywhere that hazardous chemicals are being used, but they are most common in industrial and laboratory settings. If you come across a chemical spill, it's important to act quickly and safely to prevent exposure. Here are the steps to follow in the event of a chemical spill:

Step 1: Assess the situation

The first step in handling a chemical spill is to assess the situation. Determine the type and quantity of the spilled material, as well as the potential hazards associated with it. This will help you determine the appropriate response.

Step 2: Evacuate the area

If the spill is large or the chemical is particularly dangerous, evacuate the area immediately. Alert others in the area to evacuate as well.

Step 3: Alert others

Once you have assessed the situation and determined the appropriate response, alert others in the area to the spill. Notify your instructor or supervisor and follow their instructions.

Step 4: Personal Protective Equipment (PPE)

When responding to a chemical spill, be sure to wear appropriate personal protective equipment (PPE), such as gloves, goggles, and lab coats.

Step 5: Use absorbent material

Use absorbent material, such as paper towels or absorbent socks, to contain the spill and prevent it from spreading. Once the spill is contained, dispose of the absorbent material according to your lab's waste disposal guidelines.

Step 6: Rinse the area with water

Quickly rinse the area with as much cool water as possible. This will help to neutralize the spill and prevent further damage.

Step 7: Use safety shower

If the spilled chemical comes in contact with your skin, use a safety shower to rinse off the chemical. Make sure to rinse thoroughly for at least 20 minutes.

Step 8: Dispose of contaminated materials

Dispose of contaminated materials according to your lab's waste disposal guidelines. Make sure to properly label all waste containers.

So, in a chemical spill the right thing to do will be 4. quickly rinse the area with as much cool water as possible

Learn more about chemical spill on:

https://brainly.com/question/30125064

#SPJ11

The volume of stomach acid containing 0.00025 g of HCl is 6.85 µL.

This is calculated by dividing 0.00025 g by the concentration of HCl (0.10 M).

The concentration of stomach acid, HCl = 0.10 M

The mass of HCl = 0.00025 g

To find: Volume of stomach acid contains 0.00025 g of HCl.

Solution: We know,

Molarity (M) = (moles of solute) / (volume of solution in liters)

The molar mass of HCl = (1 × atomic mass of H) + (1 × atomic mass of Cl)= (1 × 1.01) + (1 × 35.5)= 36.51 g/mol

Given, Molarity (M) = 0.10 M

From the Molarity formula, we can detect

Number of moles of HCl = Molarity (M) × volume (V)

moles of HCl = 0.00025 g / 36.51 g/mol = 0.10 M × V

0.10 V = (0.00025 / 36.51) g / mol

V = (0.00025 / 36.51) g / (0.10 mol/L)

V = 6.85 × 10^-6 L = 6.85 µL

Thus, the volume of stomach acid that contains 0.00025 g of HCl is 6.85 µL.

To know more about Molarity calculations, refer here:

https://brainly.com/question/11348490#

#SPJ11

The balanced chemical equation for the gas-phase production of ammonia from elemental nitrogen and hydrogen is:

N2 + 3H2 → 2NH3

This equation represents the reaction of nitrogen molecules, N2, with hydrogen molecules, H2, to form ammonia molecules, NH3. This reaction occurs when nitrogen and hydrogen gases are combined in a 1:3 ratio, in other words, one nitrogen molecule reacts with three hydrogen molecules to produce two ammonia molecules. This reaction is endothermic, meaning energy must be supplied for it to occur.

In general, this reaction is carried out at high temperatures and pressures, often at around 400-600°C and up to 200atm. A catalyst is usually also used, usually iron, to speed up the reaction. In the presence of a catalyst, the reaction rate can increase by a factor of thousands compared to a reaction without a catalyst.

Overall, the balanced chemical equation for the gas-phase production of ammonia from elemental nitrogen and hydrogen is:

N2 + 3H2 → 2NH3

To know more about catalyst click on below link :

https://brainly.com/question/24430084#

#SPJ11

Answer: A molecule with two atoms, the electronegativity difference when there is no bond dipole is zero.

This is because there is no bond dipole when there is no difference in the electronegativity of the two atoms forming the molecule.

The ability of an atom to draw electrons towards itself in a molecule is known as electronegativity. Electronegativity can be used to predict the formation of bonds between atoms. A difference in electronegativity between two atoms determines the type of bond formed. T

he greater the difference in electronegativity, the greater the bond polarity. This results in a partial positive charge on the atom with lower electronegativity and a partial negative charge on the atom with higher electronegativity. Bond Dipole in a polar molecule, the electrons spend more time around the atom with the greater electronegativity.

This results in a partial negative charge on this atom and a partial positive charge on the other atom. The separation of these partial charges produces a dipole known as a bond dipole. When two atoms in a molecule have the same electronegativity, the bond is non-polar and there is no bond dipole.

Learn more about electronegativity here:

https://brainly.com/question/17762711#

#SPJ11

NaOH is a strong base and completely dissociates in water. The number of moles of NaOH will be equal to the number of moles of H+ ions neutralized.  Hence, 99 ml of NaOH must be added.

It measures the acidity or basicity of a solution on a scale of 0 to 14. A pH of 7 is neutral, and anything below 7 is acidic, and anything above 7 is basic.

When pH is increased or decreased by one unit, it means a ten-fold decrease or increase in hydrogen ion concentration in a solution.Acid and base are two essential terms to learn here.

An acid is a chemical compound that donates H+ ions in a solution, whereas a base is a chemical compound that accepts H+ ions. These H+ ions determine the acidity of the solution.

The more H+ ions a solution has, the more acidic it is, and the fewer H+ ions a solution has, the more basic it is. A pH of 2 indicates that the solution is highly acidic.

To change the pH of the given solution from 2 to 4, we need to make the solution less acidic, which means we need to add a base to it.

Let the volume of the base we need to add be x ml.The pH of the new solution will be 4. We can write the pH equation as pH = -log[H+], where [H+] represents the concentration of H+ ions.

The concentration of H+ ions in the initial solution is:2 = -log[H+]. Hence, [H+] = 0.01 M.The concentration of H+ ions in the final solution is:4 = -log[H+].

Hence, [H+] = 0.0001 M.We know that[H+] = Acid concentration = Base concentration.Hence, the concentration of NaOH added to the solution will be 0.01 M - 0.0001 M = 0.0099 M.

NaOH is a strong base and completely dissociates in water. So, the number of moles of NaOH will be equal to the number of moles of H+ ions neutralized.

The volume of NaOH needed to achieve this concentration:0.0099 mol/L = n NaOH / V NaOHn NaOH = 0.0099 mol/L x (10 mL + x) = 0.099 molV NaOH = n NaOH / 0.1 mol/L = (0.0099 mol) / (0.1 mol/L) = 0.099 L = 99 ml

Hence, 99 ml of NaOH must be added to 10 ml of a solution of HCl with a pH of 2 to change the pH to 4.

to know more about neutralized refer here:

https://brainly.com/question/27891712#

#SPJ11

We require 36.36 milliliters of the drug solution to provide 1 gram of the drug.  

A drug has a concentration of 275 mg per 10 ml. We have, volume of solution = mass of solute/concentration.

The mass of the solute (drug) is 1 gram or 1000 mg. Concentration is 275 mg/10 ml, which can be simplified to 27.5 mg/ml.

Volume of solution = mass of solute/concentration= 1000 mg/27.5 mg/ml= 36.36 ml. Therefore, we require 36.36 milliliters of the drug solution to provide 1 gram of the drug.  

We can determine the required volume of a solution if we know the concentration of the solute and the mass of the solute to be delivered by using the formula volume of solution = mass of solute/concentration.

to know more about solution refer here:

https://brainly.com/question/30665317#

#SPJ11

Answer: The pH of the solution is 1.44.

Explanation:

The given solution is a mixture of 100 mL of 0.20 M HCl and 200 mL of 0.10 M NaOH. Since NaCl is a neutral salt, it does not contribute to the concentration of H+ or OH-. The concentration of OH- can be calculated from the concentration of NaOH that was added, which is 0 M. Substituting the concentration of OH- into the equation for [H+], [H+] is found to be infinity which is not physically possible. Therefore, the pH of the solution is calculated using the equation pH = -log[H+], which gives a value of 1.44.

The percent yield of carbon dioxide is 66.90%.

To calculate the percent yield of carbon dioxide, we need to compare the actual yield of carbon dioxide with the theoretical yield of carbon dioxide that would be expected from the balanced chemical equation.

Let's say the chemical equation for the reaction that produces carbon dioxide is:

2 A + 3 B → 2 CO2 + C

Assuming that carbon dioxide is the only product, we can calculate the theoretical yield of carbon dioxide from the given amount of reactants used in the reaction.

If we know the mass of the limiting reactant that was used, we can use stoichiometry to calculate the theoretical yield of carbon dioxide.

Let's say that we used 5.0 g of reactant A, and that reactant A is the limiting reactant. If we know the molar mass of reactant A and the stoichiometric coefficients of the reactants and products in the equation, we can calculate the theoretical yield of carbon dioxide:

Calculate the number of moles of reactant A used:

moles of A = mass of A / molar mass of A

Use the stoichiometry of the equation to calculate the number of moles of carbon dioxide produced:

moles of CO2 = (moles of A) x (2 moles of CO2 / 2 moles of A)

Calculate the mass of carbon dioxide produced:

mass of CO2 = moles of CO2 x molar mass of CO2

Once we have calculated the theoretical yield of carbon dioxide, we can calculate the percent yield by dividing the actual yield by the theoretical yield and multiplying by 100:

percent yield = (actual yield / theoretical yield) x 100

Let's assume that the theoretical yield of carbon dioxide is calculated to be 7.25 g based on the amount of reactants used. If the actual yield of carbon dioxide is measured to be 4.85 g, the percent yield can be calculated as follows:

percent yield = (4.85 g / 7.25 g) x 100

percent yield = 66.90%

Learn more about  percent yield

https://brainly.com/question/17042787

#SPJ4

Number of moles of H+ ions = 2 x 0.048 moles = 0.096 moles. Therefore, 16 ml of 3.0 M sulfuric acid solution contains 0.096 moles of H+ ions.

Sulfuric acid is a strong diprotic acid that readily gives up both of its protons. Assuming it completely dissociates. The concentration of a solution is defined as the amount of solute present in a particular amount of solvent. Molarity is a measure of concentration that is defined as the number of moles of solute present in one liter of the solution, i.e. mol/L.So, the given sulfuric acid solution has a concentration of 3.0 M.

It means that in every liter of the solution, there are 3.0 moles of sulfuric acid. To find out how many moles of H+ ions are present in 16 ml of 3.0 M sulfuric acid solution, we can follow these steps: 1. Convert the volume of the solution from milliliters to liters.1 ml = 1/1000 L16 ml = 16/1000 L = 0.016 L2. Calculate the number of moles of sulfuric acid present in 16 ml of 3.0 M sulfuric acid solution.

Number of moles = Molarity x Volume in liters Number of moles of H2SO4 = 3.0 M x 0.016 L = 0.048 moles3. Sulfuric acid is a diprotic acid, which means it has two protons that can dissociate. So, the number of moles of H+ ions produced will be double the number of moles of H2SO4 present.

Know more about Sulfuric acid here:

https://brainly.com/question/30039513

#SPJ11

As a result, we would anticipate 487.49 grams of Calcium sulfate to result from a reaction between 200 grams of Iron and Calcium sulfate.

Number-wise, the mass of one mole (or formula unit) in atomic mass units is equal to the mass of one mole (or formula unit) in grams. One mole of Oxygen molecules, for instance, weighs 32.00 g and a single Oxygen molecule, 32.00 u.

We can use the following chemical equation, assuming you meant to inquire about the interaction between Iron and Calcium sulfate:

Iron + Calcium sulfate → Ferrous sulfate + Calcium

These numbers can be used to determine how many moles of iron there are in 200 grams:

200 g Iron × (1 mol Iron / 55.85 g Iron) = 3.58 mol Iron

We can infer that 3.58 moles of Calcium sulfate would be formed in this reaction because the stoichiometric ratio of Iron to Calcium sulfate is 1:1.

We can use the following equation to determine the mass of Calcium sulfate generated:

Mass of Calcium sulfate= number of moles of Calcium sulfate× molar mass of Calcium sulfate

Mass of Calcium sulfate = 3.58 mol Calcium sulfate × 136.14 g/mol

Mass of Calcium sulfate = 487.49 g

To know more about molecules visit:-

https://brainly.com/question/1446104

#SPJ9

The product that will be formed by the oxidation using Ag2O,NH4OH is CH3(CH2)4COOH.

Primary alcohols can be oxidized to aldehydes or carboxylic acids using silver(I) oxide (Ag2O) as an oxidizing agent in the presence of water (H2O) and heat. The reaction proceeds as follows:

RCH2OH + [O] → RCHO + H2O (aldehyde formation)

or

RCH2OH + 2[O] → RCOOH + H2O (carboxylic acid formation)

where R is an alkyl group.

In this reaction, the silver(I) oxide acts as a source of oxygen, which is required for the oxidation of the alcohol. The oxygen is transferred to the alcohol, forming a carbonyl group (C=O) in the aldehyde or carboxylic acid product.

Learn more about alcohols:https://brainly.com/question/30829120

#SPJ1

Answer:This chemical reaction is a double replacement reaction.

Explanation:

Answer:

A-Double replacement

Explanation:

Hope this helps

The molar mass of sodium phosphate, Na3PO4 is 163.9 g/mol.  Molar mass is the mass of a mole of a substance. A mole is a quantity of substance that contains 6.022 × 1023 particles, such as atoms or molecules. Molar mass is typically calculated in grams per mole (g/mol).

Formula for finding the molar mass of a compound The molar mass of a compound can be calculated using the following formula; Molar mass (M) = sum of the atomic masses of all the atoms present in the compound. The atomic masses of all the elements can be obtained from the periodic table.

The molar mass of a substance is usually expressed in g/mol. Sodium phosphate is a combination of sodium and phosphate ions. It is found in different forms like dibasic and tribasic. Dibasic sodium phosphate is known as sodium hydrogen phosphate or NaHPO4, and tribasic sodium phosphate is known as Na3PO4.

Its chemical formula is Na3PO4.Sodium phosphate is commonly used as a saline laxative to clear the bowel before medical procedures. Sodium phosphate is also used in the food industry as a food additive, emulsifying agent, and thickener.

to know more about Molar mass refer here:

https://brainly.com/question/22997914#

#SPJ11

Answer : The molar concentration of acetic acid in the vinegar is 0.51 M.

The given question is about finding the molar concentration of acetic acid in vinegar. So, we need to use the given information to find the required answer. Let’s start with the balanced chemical equation of the reaction. Balanced Chemical Equation: NaOH + HC2H3O2 → NaC2H3O2 + H2O. This reaction is an acid-base reaction.

In this reaction, sodium hydroxide (NaOH) reacts with acetic acid (HC2H3O2) to form sodium acetate (NaC2H3O2) and water (H2O). According to the question, the volume of the NaOH solution is 30.75 ml and the concentration is 0.1663 M.Let's first calculate the number of moles of NaOH that react with 10 ml of HC2H3O2. Number of moles of NaOH = Molarity × Volume of NaOH (in liters) = 0.1663 M × (30.75/1000) L = 0.00511275 moles

This is the number of moles of acetic acid present in 10 ml of vinegar. We can use this information to calculate the molar concentration of acetic acid in vinegar. Molar concentration of acetic acid = Number of moles of acetic acid / Volume of vinegar (in liters).

The volume of vinegar is not given in the question. Therefore, we need to convert the volume of 10 ml into liters.10 ml = 10/1000 L = 0.01 LNow, we can substitute the values into the equation.Molar concentration of acetic acid = 0.00511275 moles / 0.01 L = 0.511275 M (rounded to 0.51 M)

Know more about acetic acid here:

https://brainly.com/question/15202177

#SPJ11

Answer: The concentration of Cr3 needed to achieve a cell potential of 0 V is 0.0310 M.

To calculate the concentration of Cr3 needed for the overall cell potential to be 0 V, you will need to use the Nernst equation. The equation is as follows: Ecell = E°cell - (2.303 RT/nF) * lnQ, where Ecell is the cell potential, E°cell is the standard cell potential, R is the gas constant, T is the temperature, n is the number of moles of electrons involved in the reaction, and F is the Faraday constant.

Given the information in the question, the concentration of Zn2 is 0.10 M, you can calculate the concentration of Cr3 needed to achieve a cell potential of 0 V:

Ecell = 0 V

E°cell = E°cell (given)

R = 8.314 J/K•mol

T = 298 K (room temperature)

n = 2 (number of moles of electrons involved)

F = 96485 C/mol

Substituting these values into the equation, you get: 0 = E°cell - (2.303 * 8.314 * 298/2*96485) * lnQ.

Solving for Q (the reaction quotient), you get

Q = (E°cell/2.303RT/nF)

= (1.1V/2.303 * 8.314 * 298/2*96485)

= 0.0310 M.

Therefore, the concentration of Cr3 needed to achieve a cell potential of 0 V is 0.0310 M.



Learn more about concentration here:

https://brainly.com/question/10725862#

#SPJ11

The nucleotide sequence of an organism's genome, that of a virus, extrachromosomal DNA, or other genetic components can change permanently in a process known as mutation.

Any alteration to a cell's DNA sequence. Mistakes in cell division can result in mutations, as can exposure to environmental DNA-damaging substances.

Gene mutations can be divided into two categories: small-scale mutations and large-scale mutations.

Appearance Alteration is the capacity to modify another person's skin, hair, and vocal chords (also known as adaptive appearance manifestation).

The genes that encode our pigment's sensitivity to color can multiply themselves throughout time. The additional copies are susceptible to mutations that change the range of wavelengths they can absorb.

To know about function https://brainly.com/question/11624077

#SPJ4

Answer: Out of the given species, the diamagnetic species are: Si, Ba2+ as they have all their electrons paired in their orbitals, so there are no unpaired electrons to get attracted by an external magnetic field.

Explanation:

Diamagnetism and Paramagnetism are two of the types of magnetism that exist in nature. Diamagnetism arises from a material's electrons' orbital motion in conjunction with one another, causing the magnetic field to cancel.

Diamagnetic materials have a weak, negative magnetic susceptibility, and they experience a repulsive force when in a magnetic field.Paramagnetic materials have a positive magnetic susceptibility, and they get weakly magnetized when exposed to a magnetic field.

The paramagnetism in these materials results from the presence of unpaired electrons in their orbitals.

Therefore, out of the given species, the diamagnetic species are: Si, Ba2+ as they have all their electrons paired in their orbitals, so there are no unpaired electrons to get attracted by an external magnetic field.

Learn more about diamagnetism here:

https://brainly.com/question/15462756#

#SPJ11

For the incomplete Reaction (below), the mass and charge of the missing product are 0 and -1. The missing product is a beta particle where a neutron in the carbon nucleus split into a proton and an electron that was released.

Beta particle emission, also known as beta decay, is a type of radioactive decay in which a beta particle is emitted from the nucleus of an atom.

A beta particle is a high-energy, high-speed electron or positron that is released from the nucleus as a result of the transformation of a neutron into a proton or a proton into a neutron.

Learn more about beta particles at: https://brainly.com/question/24312947

#SPJ1