[1 mole = 22.4 Liters; 1 mole = 6.02 x 10 23 atoms/molecules]
1. Determine the number of grams in 0.89 moles of carbon dioxide, CO2. Show all work.

If we add one or two hydrogen ions to a polyatomic ion that has a 3-charge, as the phosphate ion (PO₄3-), it will still be a polyatomic ion. (Three H+ would entirely cancel out the 3-charge, turning it into a neutral molecule and removing it from the category of polyatomic ions.

As a result, the carbonate ion has 2 more electrons than protons due to its negative charge. The doubly bonded oxygen in the carbonate ion is neutral, whereas each single bonded oxygen has a negative charge. This is the cause of the total charge of "-2," then.

An essential component of the atmosphere of stars like the Sun is the hydrogen anion.

learn more about carbonate ion

https://brainly.com/question/28770987

#SPJ1

The process decomposes dinitrogen pentoxide into nitrogen dioxide and oxygen. The reaction has a rate constant of 5.8103/s (5.8 10 3 / s).

According to the process described below, the thermal breakdown of N₂O₅ follows first order kinetics: N₂O₅→2NO₂+12O₂. Find the rate constant of the reaction if the starting pressure of N₂O₅   is 100 mm and the pressure created after 10 minutes is 130 mm.

The breakdown of N₂O₅  according to the equation: 2N₂O₅ (g)4NO₂(g)+O₂(g) is a first-order reaction. After 30 minutes of decomposition in a closed vessel, the total pressure created is 284.5 mm of Hg, and after full decomposition, the total pressure is 584.5 mm of Hg.

Learn more about dinitrogen pentoxide

https://brainly.com/question/30459508

#SPJ1

The heat that is released is 1600 J

65.2 kJ of heat are released for every mole of CaO that reacts.

For every mole of CaO that combines with water, 65.2 kJ of heat are generated, according to thermodynamic statistics. As a result, a considerable amount of heat is emitted throughout the reaction, making it highly exothermic.

We know that;

H = mcdT

H = heat absorbed or evolved

m = mass of the substance

c = Heat capacity of the substance

dT = temperature change.

H = 60 * 1 * (43 - 70)

H = -1600 J

Learn more about enthalpy:https://brainly.com/question/16720480

#SPJ1

The correct statement that tells whether Mary is right is: A) She is right because there will be fewer successful collisions between reactants in the dilute solutions.

What is Collision?

Collision refers to the physical interaction between two or more objects, particles, or molecules that come into contact with each other. In the context of chemistry and physics, collision often refers to the interaction between particles during a chemical reaction.

The rate of a chemical reaction is influenced by several factors, including the concentration of reactants. In general, higher concentration of reactants leads to a higher reaction rate, as it increases the frequency of collisions between reactant molecules, which is an essential step in most chemical reactions.

Learn more about Collision from the given link

https://brainly.com/question/7221794

#SPJ1

The reaction's G value at 805 K is -2625.7 kJ.

Sulfur dioxide gas is the byproduct of the interaction between sulphur and oxygen. Sulphurous acid is created when sulphur dioxide dissolves in water. Sulfuric acid causes blue litmus paper to turn red. Non-metal oxides typically have an acidic character.

ΔG = ΔH - TΔS

where ΔH is the enthalpy change, ΔS is the entropy change, T is the temperature in Kelvin, and ΔG is the change in Gibbs free energy.

Substituting the given values:

ΔG = -2374 kJ - (805 K)(312.2 J/K)

ΔG = -2374 kJ - 251717 J

ΔG = -2374 kJ - 251.7 kJ

ΔG = -2625.7 kJ

To know more about reaction's visit:-

https://brainly.com/question/28984750

#SPJ1

Answer:

2NH₃(g) + 5F₂(g) → N₂F₄(g) + 6HF(g)

(a) mol of NH₃ required = 1.333 mol; mol of F₂ required = 3.333 mol

(b) mass of F₂ required = 142.5 g

(c) N₂F₄ produced = 10.38 g

Explanation:

2NH₃(g) + 5F₂(g) → N₂F₄(g) + 6HF(g)

What is Stoichiometry?

In chemical equations, unless stated otherwise, the reactants and products will theoretically always remain in stoichiometric ratios.

The stoichiometry of a reaction is the relationship between the relative quantities of products and reactants, typically a ratio of whole integers.

Consider the following chemical reaction: aA + bB ⇒ cC + dD.

The stoichiometry of reactants to products in this reaction is the ratio of the coefficients of each species: a : b : c : d.

Converting between moles and mass:

To convert from mass to moles, divide the mass present by the molar mass, resulting in the number of moles.

Thence, the formula for moles: n = m/M, where n = number of moles, m = mass present, and M = molar mass. This formula can be easily rearranged to find mass present from molar mass and moles, or molar mass from mass and moles.

a. How many moles of each reactant are needed to produce 4.00 moles of HF?

In the given chemical equation, the stoichiometry of the reaction is

2 : 5 : 1 : 6. Therefore, for every 2 moles of NH₃, we require 5 moles of F₂, which will produce 1 mole of N₂F₄ and 6 moles of HF.

mol of NH₃ required = 1/3 × mol of HF = 1.333 mol

mol of F₂ required = 5/6 × mol of HF = 3.333 mol

b. How many grams of F₂ are required to react with 1.50 moles of NH₃?

Using stoichiometry again: mol of F₂ required = 5/2 × mol of NH₃

∴ F₂ required = 3.75 mol.

Then we can convert this to mass: m = nM = (3.75)(2×19.00) = 142.5 g

c. How many grams of N₂F₄ can be produced when 3.40 grams of NH₃ reacts?

Converting mass to moles: n = m/M = 3.40/(14.01+1.008×3) = 0.1996 mol

Using stoichiometry again: mol of N₂F₄ produced = 1/2 × mol of NH₃

∴ N₂F₄ produced = 0.0998 mol

converting moles to mass: m = nM = (0.0998)(14.01×2+19.00×4)

∴ N₂F₄ produced = 10.38 g

Answer:

140.3 *C

Explanation:

(P1 * V1) / T1 = (P2 * V2) / T2

where P1 = 3.000 atm, V1 = 200.0 ml, T1 = 37.0°C + 273.15 = 310.15 K, P2 = 2.000 atm, V2 = 400.0 ml.

Substituting these values into the formula gives:

(3.000 atm * 200.0 ml) / 310.15 K = (2.000 atm * 400.0 ml) / T2

Solving for T2 gives:

T2 = (2.000 atm * 400.0 ml * 310.15 K) / (3.000 atm * 200.0 ml)

T2 ≈ 413 K or 140°C.

To calculate the cell potential, Ecell, for the given reaction at 298K, we need to use the Nernst equation. The Nernst equation relates the cell potential to the standard cell potential, temperature, and the concentrations of the reactants and products. The Nernst equation is given as follows:

Ecell = E°cell - (RT/nF) ln(Q)

where,

Ecell = cell potential

E°cell = standard cell potential

R = gas constant (8.314 J/K.mol)

T = temperature (298 K)

n = number of electrons transferred in the balanced redox reaction

F = Faraday constant (96,485 C/mol)

Q = reaction quotient

The given reaction is a redox reaction, which involves the transfer of two electrons from Co to Ag+. The balanced half-reactions are as follows:

Co(s) → Co2+(aq) + 2 e-

Ag+(aq) + e- → Ag(s)

The standard reduction potentials for these half-reactions are:

Co2+(aq) + 2 e- → Co(s) E°red = -0.28 V

Ag+(aq) + e- → Ag(s) E°red = +0.80 V

The overall standard cell potential can be calculated by subtracting the standard reduction potential of the anode from that of the cathode:

E°cell = E°red,cathode - E°red,anode

= +0.80 V - (-0.28 V)

= +1.08 V

Now we need to calculate the reaction quotient Q using the concentrations of the reactants and products. According to the given information, [Ag+] = 0.010 M and [Co2+] = 0.015 M.

Q = ([Co2+][Ag+]^2)/([Ag+]^2)

= ([0.015][0.010]^2)/([0.010]^2)

= 0.015 M

Substituting the values in the Nernst equation, we get:

Ecell = E°cell - (RT/nF) ln(Q)

= 1.08 - (8.314 x 298 / (2 x 96485)) ln(0.015)

= 0.829 V

Therefore, the cell potential, Ecell, for the given reaction at 298K is 0.829 V.

Yes, If all the coefficients in a balanced chemical equation are multiplied by 2, the equation will still remain balanced because the ratio of the reactants and products remain the same.

What are the coefficients?

For example, the balanced equation: [tex]2H_{2}[/tex] + [tex]O_{2}[/tex] -> [tex]2H_{2}O[/tex]

The coefficients of a chemical equation are the numbers written in front of the chemical formulas of reactants and products, indicating the relative amounts of each substance involved in the reaction. The coefficients are used to balance the chemical equation, ensuring that the law of conservation of mass is obeyed. The coefficients represent the smallest whole-number ratios of the substances in the reaction, and they provide important information about the stoichiometry of the reaction.

When all the coefficients are multiplied by 2, the equation becomes: [tex]4H_{2}[/tex] + [tex]2O_{2}[/tex] -> [tex]4H_{2}O[/tex]

The equation is still balanced because the ratio of hydrogen to oxygen to water molecules remains the same (4:2:4).

Multiplying the coefficients by a constant will not affect the equilibrium constant (Kc) as long as the reaction conditions remain constant. This is because the equilibrium constant is a ratio of the concentrations of products and reactants at equilibrium, and the ratio remains the same even if the coefficients of the balanced equation are multiplied by a constant. However, if the temperature, pressure or concentration of any reactants or products are changed, then the value of the equilibrium constant will change.

To know more about coefficients, visit:

https://brainly.com/question/31467971

#SPJ1

nuclear type of process is this

The content of a physical reaction differs from that of a chemical reaction. A chemical reaction changes the makeup of the substances in question; a physical change changes the look, smell, or plain presentation of a sample of matter without changing its content.

Nuclear reactions are not the same as chemical reactions. Atoms become more stable in chemical processes by engaging in electron transfers or by sharing electrons with other atoms.

learn more about Nuclear reactions

https://brainly.com/question/25387647

#SPJ1

The mass of iron present in 9.24 x [tex]10^{22}[/tex] atoms of Fe is approximately 0.852 grams.

What is Molar Mass?

Molar mass is the mass of one mole of a substance, expressed in grams per mole. It is calculated by summing the atomic masses of all the atoms in a molecule or formula unit.

The molar mass of iron (Fe) is approximately 55.85 g/mol. We can use this to convert the number of atoms of Fe to the mass of Fe.

First, we can calculate the number of moles of Fe in 9.24x[tex]10^{22}[/tex] atoms:

Mass of Fe = 9.24 x [tex]10^{22}[/tex] atoms x 55.845 g/mol / 6.022 x [tex]10^{-23}[/tex]atoms/mol

Mass of Fe = 0.852 g

So, the mass of iron present in 9.24 x [tex]10^{22}[/tex] atoms of Fe is approximately 0.852 grams.

Learn more about Molar Mass from the given link

https://brainly.com/question/837939

#SPJ1

0.02314 moles of  NO₂ can be formed from the decomposition of 1.25 g of dinitrogen pentoxide.

The balanced equation for the decomposition of dinitrogen pentoxide is:

2 N₂O₅ → 4 NO₂ + O₂

The molar mass of N₂O₅  is 108.01 g/mol.

To determine the number of moles of N₂O₅  present in 1.25 g, we use the following calculation:

moles N₂O₅  = mass / molar mass

moles N₂O₅ = 1.25 g / 108.01 g/mol

moles N₂O₅ = 0.01157 mol

From the balanced equation, we can see that 2 moles of N₂O₅  decompose to form 4 moles of NO2. Therefore, the number of moles of NO2 produced can be calculated as:

moles  NO₂ = (0.01157 mol N2O5) × (4 mol NO2 / 2 mol N2O5)

moles  NO₂ = 0.02314 mol

Therefore, 0.02314 moles of  NO₂ can be formed from the decomposition of 1.25 g of dinitrogen pentoxide.

learn more about moles here

https://brainly.com/question/29367909

#SPJ1

252,212 Joules of energy are required to heat 100g of water from 35°C to 115°C water vapor.

To calculate the amount of energy required to heat water from 35°C to 100°C, we use the specific heat capacity of water, which is 4.18 J/(g°C). This means that it takes 4.18 Joules of energy to heat one gram of water by one degree Celsius.

So, the energy required to heat 100 g of water from 35°C to 100°C can be calculated as follows:

Q1 = m × c × ΔT

Q1 = 100 g × 4.18 J/(g°C) × (100°C - 35°C)

Q1 = 26,212 Joules

Next, we need to calculate the amount of energy required to vaporize the water at 100°C. This is done using the heat of vaporization of water, which is 2260 J/g.

So, the energy required to vaporize 100 g of water at 100°C is:

Q2 = m × Lv

Q2 = 100 g × 2260 J/g

Q2 = 226,000 Joules

Therefore, the total energy required to heat 100 g of water from 35°C to 115°C water vapor is:

Q = Q1 + Q2

Q = 26,212 Joules + 226,000 Joules

Q = 252,212 Joules

Thus, 252,212 Joules of energy are required to heat 100g of water from 35°C to 115°C water vapor.

learn more about energy here

https://brainly.com/question/13881533

#SPJ1

The value of y is 1141 g if 4.34 g of this compound were totally burned, and the heat released caused a gram of water to warm up from 27.5 °C to 45.5 °C.

1 mole of ethylene glycol burns with a heat output of -1189.2 kJ/mol. The following formula can be used to determine the amount of heat released during the burning of 4.34 g of ethylene glycol:

Ethylene glycol's ([tex]C_{2}H_{6}O_{2}[/tex]) molar mass is calculated as follows: 2(12.01 g/mol) + 6(1.01 g/mol) + 2(16.00 g/mol) = 62.07 g/mol

Burned ethylene glycol is calculated as follows: 4.34 g / 62.07 g/mol = 0.0699 mol

4.34 g of ethylene glycol burned, releasing the following amount of heat:

-83.1 kJ = 0.0699 mol x -1189.2 kJ/mol

The water used in the experiment absorbs this heat. Water has a specific heat capacity of 4.18 J/g°C. The following formula can be used to determine how much water was utilized in the experiment:

The amount of heat the water absorbs is: -83.1 kJ = -83,100 J

The water's temperature changed from 45.5 °C to 27.5 °C, which equals 18 °C.

The mass of water employed in the experiment is 1,141 g, which is equal to -83,100 J / (4.18 J/g°C 18 °C).

To learn more about heat of combustion visit:

brainly.com/question/14317568

#SPJ9

Answer:

To calculate Δ∘rxn, we can use the following formula:

ΔG∘rxn = ΔH∘rxn - TΔS∘rxn

where ΔH∘rxn is the enthalpy change of the reaction, T is the temperature in Kelvin, and ΔS∘rxn is the entropy change of the reaction.

We know that ΔH∘rxn = -44.2 kJ and we want to find ΔS∘rxn at 25.0 ∘C (298 K). We can use the following formula to calculate ΔS∘rxn:

ΔG∘rxn = -RTlnK

where R is the gas constant (8.314 J/mol K), T is the temperature in Kelvin, and K is the equilibrium constant.

We can find K using the following formula:

ΔG∘rxn = -RTlnK K = e^(-ΔG∘rxn/RT)

We know that ΔG∘rxn = -44.2 kJ/mol and R = 8.314 J/mol K, so we can calculate K:

K = e^(-(-44.2 kJ/mol)/(8.314 J/mol K * 298 K)) K = 1.9 x 10^7

Now we can use K to calculate ΔS∘rxn:

ΔG∘rxn = -RTlnK ΔS∘rxn = -(ΔH∘rxn - ΔG∘rxn)/T ΔS∘rxn = -((-44.2 kJ/mol) - (-8.314 J/mol K * 298 K * ln(1.9 x 10^7)))/(298 K) ΔS∘rxn = -0.143 kJ/K

Therefore, ΔS∘rxn is -0.143 kJ/K.

To determine whether the reaction is spontaneous at 25 ∘C and standard pressure, we can use Gibbs free energy (ΔG). If ΔG < 0, then the reaction is spontaneous in the forward direction; if ΔG > 0, then it is spontaneous in the reverse direction; if ΔG = 0, then it is at equilibrium.

We know that ΔG∘rxn = -44.2 kJ/mol and T = 25 ∘C (298 K). We can use the following formula to calculate ΔG:

ΔG = ΔG∘ + RTlnQ

where Q is the reaction quotient.

At equilibrium, Q = K (the equilibrium constant). Since we calculated K earlier to be 1.9 x 10^7, we can use this value for Q.

ΔG = ΔG∘ + RTlnQ ΔG = (-44.2 kJ/mol) + (8.314 J/mol K * 298 K * ln(1.9 x 10^7)) ΔG = -43.6 kJ/mol

Since ΔG < 0, the reaction is spontaneous in the forward direction at 25 ∘C and standard pressure.

Taking into account definition of percent yield, the correct answer is option c): the percent yield for the reaction is 0.947.

In first place, the balanced reaction is:

CH₄ + 2 O₂ → CO₂ + 2 H₂O

By reaction stoichiometry, the following amounts of moles of each compound participate in the reaction:

The molar mass of the compounds is:

By reaction stoichiometry, the following mass quantities of each compound participate in the reaction:

The following rule of three can be applied: if by reaction stoichiometry 16.05 grams of CH₄ form 44.01 grams of CO₂, 136 grams of CH₄ form how much mass of CO₂?

mass of CO₂= (136 grams of CH₄× 44.01 grams of CO₂)÷16.05 grams of CH₄

mass of CO₂= 372.92 grams

Then, 372.92 grams of CO₂ can be produced from 136 grams of CH₄.

The percent yield is the ratio of the actual return to the theoretical return expressed as a percentage and this is calculated as the experimental yield divided by the theoretical yield multiplied by 100%:

percent yield= (actual yield÷ theoretical yield)× 100%

where the theoretical yield is the amount of product acquired through the complete conversion of all reagents in the final product.

In this case, you know:

Replacing in the definition of percent yield:

percent yield= (353 grams÷ 372.92 grams)× 100%

Solving:

percent yield= 94.7%= 0.947

Finally, the percent yield for the reaction is 0.947.

Learn more about percent yield:

brainly.com/question/14408642

#SPJ1

Answer:

silicon dioxide,xenon

Explanation:

Answer:

colloid

Explanation:

there's no explanation

The concentrations of all species in a 0.510 M NaCH₃COO (sodium acetate) solution: [Na+]= 0.510 M , [OH-]= 1.8x10⁻⁵ M , [H₃O+]= 1.8x10⁻⁵ M , [CH₃COO-]= 0.510 M and [CH₃COOH]= 0.510 - (1.8x10⁻⁵) = 0.50982 M.

Concentration is the ability to focus your attention on a single task or thought for a prolonged period of time. It involves being able to ignore distractions and to be able to work through any difficulties or obstacles that may arise. Concentration is an important skill to master in order to achieve success in any endeavor, whether it be academic, professional, or personal. Good concentration can help you to stay focused, organized, and productive. When you are able to concentrate, you can take in the information needed to make better decisions and solve problems. Concentration is a skill that can be developed with practice, such as by setting goals, breaking down tasks into smaller, manageable pieces, and avoiding distractions.

To learn more about concentration
https://brainly.com/question/29330415
#SPJ1

I would say C

Since the nitro group (NO2) contains a positively charged nitrogen atom, it tends to attract electron from the aromatic ring and, therefore, the other group/atom. In the first case, I think piridine (II) makes a stronger bond with water since the nitrogen in the aromatic ring needs its electrons in order to be have a slight negative charge that can interact with the slightly positive charged hydrogen atom in water. If the nitro group is present, it will attract to some extent the electrons of the nitrogen atom in the ring, thus making the H-bond less stronger.

In the second case the hydrogen, which is slightly positive, of the OH group interacts with the oxygen, which is slightly negative, of water. If the nitro group is present, it will attract the electrons of oxygen of the hydroxyl group, therefore making the bond between the oxygen and the hydrogen more polar (which basically means that the bonding electron of hydrogen is even more attracted by the oxygen atom) making the hydrogen atom more positive, which means that the H-bond will be stronger

It requires 10.15 kilojoules of energy.

The term "vaporisation" (or "evaporation") often refers to the transformation of a liquid's condition into a vapour phase below its boiling point. The phrase, however, can also refer to the process of removing a solvent, independent of the temperature used.

When a body moves to exert force, it is said to be exerting work. Energy is the capacity to accomplish work. Energy is something we always need, and it can take many different forms.

If the gold is present in the liquid state, you only have to determine the latent heat of vaporization, or lvap. The empirical data for gold is 330 kJ/mol.

Q = mlvap

Q = (2 kg)(1 kmol/197 kg)(1,000 mol/1 kmol)

Q = 10.15 kJ

It needs an energy of 10.15 kilojoules

To know more about energy visit:

https://brainly.com/question/1932868

#SPJ1

The pH of the solution can be calculated using the following steps:

Write the chemical equation for the dissociation of ethanoic acid:

CH3COOH + H2O ⇌ CH3COO- + H3O+

Write the equilibrium expression for the dissociation of ethanoic acid:

Ka = [CH3COO-][H3O+] / [CH3COOH]

Since the solution is equimolar in CH3COOH and CH3COO-, we can assume that the initial concentrations of CH3COOH and CH3COO- are equal. Let's use the variable x to represent the concentration of CH3COO- and CH3COOH in mol/L.

[CH3COOH] = x mol/L [CH3COO-] = x mol/L

Since CH3COOH is a weak acid, we can assume that only a small fraction of it dissociates in water. Let's use the variable y to represent the concentration of H3O+ ions in mol/L that are produced from the dissociation of CH3COOH. From the dissociation of ethanoic acid, we know that [CH3COO-] = [H3O+].

[CH3COO-] = y mol/L [H3O+] = y mol/L

Use the equilibrium expression to solve for the concentration of H3O+ ions:

Ka = [CH3COO-][H3O+] / [CH3COOH] 1.79 x 10^-5 = y^2 / x

Solving for y in terms of x, we get:

y = sqrt(Ka * x)

Calculate the pH of the solution using the equation:

pH = -log[H3O+]

pH = -log(y)

Substituting in the value of y from Step 5, we get:

pH = -log(sqrt(Ka * x))

Simplifying, we get:

pH = -0.5 * log(Ka * x)

Substituting in the value of Ka, we get:

pH = -0.5 * log(1.79 x 10^-5 * x)

Now we can calculate the pH for the solution by substituting the value of x as it is equimolar.

pH = -0.5 * log(1.79 x 10^-5 * x)

pH = -0.5 * log(1.79 x 10^-5 * 1)

pH = -0.5 * log(1.79 x 10^-5)

pH = 4.74

Therefore, the pH of an equimolar solution of ethanoic acid and Na+CH3COO- is 4.74.

The unknown metal with C(metal) of 0.90J/gC and mass of 4.67g is aluminum.

The metal's specific heat is calculated using the heat equation. It is important to note that the total heat (Q), which is the sum of the two heats (Qwater and Qmetal), is equal to zero at equilibrium.

Now, Q(total)=Q(water)+Q(metal)

0=m(water)

The specific heat of water, C(water), is equal to 4.18 J/g, while the other two components are water and metal.

The temperature of a metal is known as C(metal).

With the given values all substituted, we obtain 0=m(water) C(water)T(water) +m(metal).

CmetalΔTmetal=(24.3g)(4.184J/g°C) (24.6°C−21.7°C)+(4.67g) (Cmetal)(24.6°C−95.1°C)

The metal's specific heat is given by the equation C(metal)=0.90J/gC, which is simplified by placing C(metal) on one side of the equation.

Part (b):As a result, aluminum is the metal.

For more information on calorimeter kindly visit to

https://brainly.com/question/4802333

#SPJ1

A sample of oxygen gas at 70 degrees Celsius is not twice as hot as a sample of oxygen gas at 35 degrees Celsius.

What is Temperature?

Temperature is a physical property that describes the degree of hotness or coldness of a substance, typically measured with a thermometer in units such as Celsius or Fahrenheit. It is a measure of the average kinetic energy of the particles that make up a substance, with higher temperatures indicating greater kinetic energy and lower temperatures indicating less kinetic energy.

The temperature difference between the two samples is 35 degrees Celsius, not 70 degrees Celsius. Temperature is a measure of the average kinetic energy of the particles in a substance, and it is on an absolute scale (Kelvin).

As we can see, the temperature in Kelvin of oxygen gas at 70 degrees Celsius (343.15 K) is not twice the temperature of oxygen gas at 35 degrees Celsius (308.15 K). Therefore, a sample of oxygen gas at 70 degrees Celsius is not twice as hot as a sample of oxygen gas at 35 degrees Celsius.

Learn more about Temperature from the given link

https://brainly.com/question/26866637

#SPJ1

The new volume of the helium sample would be 2.4 L.

According to the ideal gas law, PV = nRT, where P is the pressure, V is the volume, n is the number of moles of gas, R is the gas constant, and T is the temperature in kelvins.

At STP (standard temperature and pressure), which is defined as 0°C (273.15 K) and 101.325 kPa, the volume of 2.0 liters of helium gas contains one mole of helium atoms.

To find the new volume of the helium sample when the temperature is increased to 27°C (300.15 K) and the pressure is decreased to 80 kPa, we can use the following equation:

(P1V1)/T1 = (P2V2)/T2

where P1, V1, and T1 are the initial pressure, volume, and temperature, respectively, and P2, V2, and T2 are the final pressure, volume, and temperature, respectively.

Plugging in the values, we get:

(101.325 kPa)(2.0 L)/(273.15 K) = (80 kPa)(V2)/(300.15 K)

Solving for V2, we get:

V2 = (101.325 kPa)(2.0 L)/(273.15 K) * (300.15 K)/(80 kPa) = 2.36 L

Therefore, the new volume of the helium sample is approximately 2.4 L (rounded to the nearest tenth).

More on gas laws can be found here: https://brainly.com/question/27009857

#SPJ1

The result of the transformation, denoted by the symbol X, is 12 6C.

The chemical symbol for the unstable nucleus, X, is represented by the nuclear equation, where the letter a stands for the particle's mass number and the letter b for the number of protons.

the process of changing one chemical element into another. Since a transmutation involves a change to the atomic nuclei's structure, it can either be produced via a nuclear reaction (q.v. ), like neutron capture, or it can happen naturally due to radioactive decay, like alpha and beta decay (qq. v.).

To know more about nucleus visit:

https://brainly.com/question/14600198

#SPJ1

The independent and dependent variables are compounds and elements, respectively.

Elements and compounds make up everything in our surroundings. Knowing how things operate can aid in our ability to comprehend our surroundings.

Water is one of the chemicals listed in the table (H2O). This molecule has 3 atoms, which can be broken down into 2 hydrogen (H) atoms and 1 oxygen atom (O).

Several compounds can be created by mixing the same two elements' atoms in different ratios.

Because these elements mix in various ways and in various quantities to create unique compounds, we have a huge variety of compounds in this universe.

To learn more about chemical compounds visit:

brainly.com/question/12166462

#SPJ1

The moles of ammonium fluoride initially added in this experiment was 0.0216 moles.

Mole is a unit of measurement that is used in chemistry to measure the amount of a substance. It is a very important unit of measurement because it allows chemists to accurately measure the amount of a substance that is being used in a reaction. The mole is defined as the amount of a substance that contains the same number of particles as there are atoms in 12 grams of carbon-12..

First, we need to calculate the moles of calcium nitrate in the solution. We can do this by using the molarity and volume of the solution:
(4.61x10⁻¹ M)*(4.479x10¹ mL) = 0.0216 moles of calcium nitrate
(0.731 g)*(1 mol/55.847 g) = 0.0131 moles of calcium fluoride
(0.0216 moles)*(1 mol/1 mol)
= 0.0216 moles of ammonium fluoride
Therefore, the moles of ammonium fluoride initially added in this experiment was 0.0216 moles.

To learn more about mole
https://brainly.com/question/29367909
#SPJ1

Answer:

M=0.06998 mol/L

Explanation: