Answer:
Buoyant Force
Explanation:
That's literally the definition of the buoyant force
1. The electric field strength between two parallel plates separated by 6.00 cm is 7.50 × 104 V/m . (a) What is the potential difference between the plates? (b) The plate with the lowest potential is taken to be zero volts. What is the potential 1.00 cm from that plate and 6.00 cm from the other?
Answer:
a)4500V
b)750V
Explanation:
Given:
Distance between the plate=
6.00 cm
We need to convert to m
Then the Distance between the plate=
0.06m
electric field strength between two parallel plates =
7.50 × 104 V/m .
Then E= 7.50 × 104 V/m .
(a) What is the potential difference between the plates?
potential difference between the plates can be calculated using the formula below
Δ Vab=ED
Where E is the given electric field strength
D= The Distance between the plate
ΔVab=7.50 × 10⁴V/m ×
0.06m
= 4500V
(b) The plate with the lowest potential is taken to be zero volts. What is the potential 1.00 cm from that plate and 6.00 cm from the other?
the potential 1cm from the zero volt plate
Then the 1cm must be converted to m
= 0.01m
Let us say plate A as the plate at 0 volts:
The potential increases linearly going from plate A (0 V) to plate B (4500V).
Therefore,if the potential difference between A and B, separated by 6 cm, is 4500 V, then the potential difference between A and a point located at 1 cm from A is can be calculated also
If the plate with Lowest potential is taken to be zero then
=ΔVab=Vab-Vb=Va-0=Va=ED
Va=7.50 × 10⁴V/m × 0.01=750V
1600cm of fresh water of density 1g/cm are mixed with 1200 cm of sea water of
density 1.2g/cm'. Determine the density of the mixture..
Answer:
[tex]\boxed{\mathrm{Density = 1.1 \ g/cm^3}}[/tex]
Explanation:
Volume of fresh water:
Volume = Mass / Density
Volume = 1600/1
[tex]V_{1}[/tex] = 1600 cm³
Volume of sea water:
Volume = Mass / Density
Volume = 1200/1.2
Volume = 1000 cm³
So,
Total Volume when they are mixed = 1600+1000
Total Volume when they are mixed = 2600 cm³
And,
Total Mass when they are mixed = 1600+1200
Total Mass when they are mixed = 2800 g
Now, Measuring the density of the mixture:
Density = Mass / Volume
Density = 2800/2600
Density = 1.1 g/cm³
Answer:
[tex]\mathrm{1.086 \: g/cm^3 }[/tex]
Explanation:
Volume of fresh water ⇒ 1600 cm³
Density of fresh water ⇒ 1 g/cm³
Volume of sea water ⇒ 1200 cm³
Density of sea water ⇒ 1.2 g/cm³
[tex]density=\frac{mass}{volume}[/tex]
[tex]mass=density \times volume[/tex]
Calculate mass of fresh water.
[tex]m=1600 \times 1[/tex]
[tex]m=1600 \: g[/tex]
Calculate the mass of sea water.
[tex]m=1200 \times 1.2[/tex]
[tex]m=1440 \: g[/tex]
Find the density of the mixture.
[tex]density=\frac{mass}{volume}[/tex]
[tex]\rho = \frac{1600+1440}{1600 + 1200}[/tex]
[tex]\rho = \frac{3040}{2800}[/tex]
[tex]\rho= 1.0857...[/tex]
PLEASE HELP. i will mark brainliest. and do more!
I would suggest an easier route. So for example, I would research light energy, where it comes from, and what causes it. I won't be able to do the work for you though.
A load of 500N is carried by 200N effort in a simple machine having load distance 3m Calculate effort distance.
Answer:
2.5 mExplanation:
Load ( L ) = 500 N
Effort ( E ) = 200 N
Load distance ( LD ) = 3 m
Effort distance ( ED ) = ?
Now, Let's find the Effort distance ( ED )
We know that,
Output work = Input work
i.e L × LD = E × ED
plug the values
[tex]500 \times 3 = 200 \times ED[/tex]
multiply the numbers
[tex]1500 = 200 \times ED[/tex]
Swipe the sides of the equation
[tex]200 \: ED \: = 500[/tex]
Divide both sides of the equation by 200
[tex] \frac{200 \: ED}{200} = \frac{500}{200} [/tex]
Calculate
[tex]ED\: = 2.5 \: m[/tex]
Hope this helps..
best regards!!
What is the magnitude of the gravitational force between the earth and a 1 kg object on its surface? (Mass of the earth is 6 × 10 24 kg and radius of the earth is 6.4 × 10 6 m.)
Answer:
Explanation:
just use the gravational force equation which is G x m of earth x m of object divided by r squared (which is radius of earth)
You work for an advertising company and have been hired to place a blimp above a football stadium. The angle of elevation from a point directly under the goal post is 72° and the blimp will be directly above the 50 yard line. a. Which trigonometric ratio would you use to calculate how high the blimp will be above the 50 yard line? b. How high above the ground is the blimp? c. In order to be able to read the advertisement on the side of the blimp the highest the blimp can be is 150 feet. Will the fans be able to read the advertisement? If not, what possible angle of elevation could we use? d. What is the exact angle if the blimp is at 150 feet?
Answer:
a) tangent ; b) 153.88 yds ; c) No , less than or equal to 45° ; D) 45°
Explanation:
Given the following ;
From the triangle sketch :
Base length = 50 yards
Angle of elevation = 72°
a. Which trigonometric ratio would you use to calculate how high the blimp will be above the 50 yard line?
Using trigonometry :
The height of the blimp will be calculated using :
Tangent :
Tan θ = opposite / Adjacent
B.) How high above the ground is the blimp?
Using :
Tan θ = opposite / Adjacent
Θ = 72° ; adjacent = 52, opposite = height(h)
Tan 72° = h / 50
h = 3.0776835 * 50
h = 153.88 yds
C.) In order to be able to read the advertisement on the side of the blimp the highest the blimp can be is 150 feet. Will the fans be able to read the advertisement?
1 yard = 3 Feets
153.88 yards = 3 * 153.88
= 461.65 feets
No, because the height of the blimp is 461.65 Feets which is greater than 150 Feets.
To make viewing possible, the angle of elevation should be:
50 yards is equivalent to (3 * 50) = 150 feets
Max imum Height of blimp = 150 Feets
From pythagoras ;
Tanθ = 150 Feets / 150 Feets
Tanθ = 1
θ = tan^-1(1)
θ = 45°
To make viewing advertisement possible, angle of elevation should not exceed 45°
d.)If height of blimp is 150 Feets, then the exact angle of elevation will be 45°
To a stationary observer, a bus moves south with a speed of 12 m/s. A man
inside walks toward the back of the bus with a speed of 0.5 m/s relative to
the bus. What is the velocity of the man according to a stationary observer?
A. 11 m/s south
B. 12.5 m/s south
C. 11.5 m/s south
D. 0.5 m/s south
ANSWER
C 11.5 m/s
EXPLANATION
Answer:
11.5m/s south
Explanation:
Online classes
a man with mass 81 kg lies on the floor. what is the normal force on the man?
Answer:
Forces come in pairs, so the force of gravity (9.8 N) with the mans weight (794N) on the earth is counteracted with the normal force ( the force of the earth back on the man) which is the same
Explanation:
Forces are available in pairs, so the force of gravity (nine.8 N) with the man's weight (794N) on the planet is counteracted with the everyday force ( the pressure of the earth again on the man) that's identical.
What is the gravitational force?Gravitational force is a pressure that draws any items with mass. We name the gravitational force appealing as it constantly attempts to tug loads collectively, it never pushes them apart. In reality, every item, together with you, is pulling on each other objects inside the complete universe.
Learn more about Gravitational force here: https://brainly.com/question/13010127
#SPJ2
A railroad car having a mass of 15 Mg is coasting at 1.5 m/s on a horizontal track. At the same time another car having a mass of 12 Mg is coasting at 0.75 m/s in the opposite direction. If the cars meet and couple together, determine the speed of both cars just after the coupling. Find the difference between the total kinetic energy before and after coupling has occurred. Explain qualitatively what happened to this energy.
Answer:
Explanation:
We shall apply law of conservation of momentum to know velocity after collision . Let it be v .
total momentum before collision = total momentum after collision
15 x 1.5 - 12 x .75 = ( 15 + 12 ) v
v = .5 m /s
kinetic energy before collision
1/2 x 15 x 1.5² + 1/2 x 12 x .75²
= 16.875 + 3.375
= 20.25 J
kinetic energy after collision
= 1/2 x ( 15 + 12 ) x .5²
= 3.375 J
Loss of energy = 16.875 J
This energy appear as heat and sound energy that is produced during collision .
PLEASE HELP ASAP. IT'S URGENT
Answer:
Q1 acceleration = 16m/s²
Q2 Net force = 9N North
Explanation:
Q1 Using the formula F=ma
Q2 R = F1 + F2
Average velocity is different than average speed because calculating average velocity involves a)Distance b)Time c)Motion d)Displacemnet
Answer:
D. Displacement
Explanation:
got it right on edge
Average velocity is different than average speed because calculating average velocity involves Displacement, therefore the correct option is option D.
What is Velocity?The total displacement covered by any object per unit of time is known as velocity. It depends on the magnitude as well as the direction of the moving object. It can also be represented by the infinitesimal rate of change of displacement with respect to time. The unit of velocity is meter/second.
The mathematical expression for velocity is given by
velocity= displacement / time taken
In the displacement time graph the slope of the curve represent the velocity of the object ,the rate of change of velocity is known as the acceleration of the object .
In the velocity time graph the slope of the curve represent the acceleration of the body, The unit of acceleration is metre per second Square
The total distance traveled by an object is different than the total displacement covered by it because the displacement is a vector quantity and it is calculated on the basis of the shortest distance traveled by the body or object.
The main difference between the distance and the displacement is that displacement can be positive or negative or zero but distance can never be negative.
Let’s understand understand with example of average velocity ,suppose an object is moving with 200 m displacement covered in a time of 15 seconds then the average velocity of the object is 13.33 m/s.
Thus, average velocity is different than average speed because calculating average velocity involves Displacement, therefore the correct option is option D.
Learn more about Velocity from here
brainly.com/question/18084516
#SPJ6
why is string a good force measurer?
Answer:
tension is how much force is being exerted on each end of the string, whereas length is how long the string is. So assuming that the string has finite mass, then the tension on the string should increase proportionally to the string according to Newton's law f=ma.
Explanation:
Formulating a Hypothesis: Part II
Now you will focus on a second hypothesis. This
hypothesis can be very similar to the first, but this time
you want to focus only on the second variable in
question, speed. What could be a hypothesis that would
illustrate the relationship between speed and kinetic
energy? Use the format of "if.. then... because..." when
writing your hypothesis.
If we have a ball rolling its speed could determine the amount of
kinetic energy in it while in movement
Explanation:
The kinetic energy of an object is given by :
[tex]E=\dfrac{1}{2}mv^2[/tex]
m is mass of the object
v is the speed of the object
It is clear from the above relation that the kinetic energy of the object is directly proportional to the product of mass and velocity.
The hypothesis can be :
If the speed of the object increased then its kinetic energy increase because kinetic energy is directly proportional to ist speed.
The kinetic energy of an object is given by :
m is mass of the object
v is the speed of the object
It is clear from the above relation that the kinetic energy of the object is directly proportional to the product of mass and velocity.
The hypothesis can be :
If the speed of the object increased then its kinetic energy increase because kinetic energy is directly proportional to its speed.
A very thin film of soap, of thickness 170 nm, in between air seems dark. On the other hand, when placed on top of glass some visible light is seen to shine from the film. How can this happen and what is the smallest visible light that creates constructive interference when we place the film on top of glass
Answer:
λ₀ = 2 d n
Explanation:
A soap film is a layer where the lus is reflected on the surface and on the inside of the film, these two reflected rays can interfere with each other either constructively or destructively.
Let's analyze the general conditions of this interference,
* When the ray of light reaches the surface of the film it is reflected, as the index of refraction of the air is less than the index of the film, the reflected ray has a phase change of 180º
* When the ray penetrates the film, its wavelength changes due to the refractive index of the film.
λ = λ₀ / n
where lick is the wavelength in the vacuum or air and n index of refraction of the film, in general this interference is observed perpendicular to the film, so the sine veils 1. the expression for constructive interference taking in what previous remains
2d = (m + ½) λ
the expression for destructive interference remains
2d = m λ
2d = m λ₀ / n
When the film is placed on a glass plate whose index of refraction is greater than the index of refraction of the film, in the reflection in the lower part of the film another phase difference of 180º is created, for which we have a difference of total phase of 180 +180 = 360º, which is equivalent to no phase difference, therefore the two previous equations are interchanged.
Therefore where we had destructive interference now a cosntructive interference happens we can see the reflected light.
Find us the wavelength that this constructive interference creates
2d n = m λ₀
λ₀ = 2 d n / m
To find the minimum wavelength, suppose we observe the first interference pattern m = 1
λ₀ = 2 d n
where d is the thickness of the film and n the index of refraction of the same
Find the force. 10 points. Will give brainliest!
Answer:
8996kg*m/s/s
Explanation:
Given:
a=26m/s/s
m=346kg
Required:
f=?
Formula:
f=m*a
Solution:
f=346kg*26m/s/s
f=8996kg*m/s/s
Hope this helps ;) ❤❤❤
Answer:
[tex]\boxed{F = 8996 \ Newton}[/tex]
Explanation:
Given:
Mass = m = 346 kg
Acceleration = a = 26 m/s²
Required:
Force = F = ?
Formula:
F = ma
Solution:
F = 346 * 26
F = 8996 Newton
Hydrogen fuel cells are used on the space shuttle to provide the shuttle with all of its electrical energy. Explain why fuel cells are used instead of batteries.
Answer:
Hydrogen used in fuel cells has the energy to weight ratio ten times greater than lithium-ion batteries. Consequently, it offers much greater range while being lighter and occupying smaller volumes. It can also be recharged in a few minutes, similarly to gasoline vehicles.
Negative ions have _____.
A negaive ion has more electrons bound to it than protons in its nucleus.
A firework is initially at rest explodes into 2 pieces one of which weighing 2.0 kg flies to the right at15 m/s the other piece flies to tje left at 20m/s wjat is tge mass of firework before explosion??
Answer:
3.5 kg
Explanation:
use the equation; (m1v1i) + (m2v2i) = (m1v1f) + (m2v2f)
= m1(0) - m1v1f = m2v2f - m2(0)
= (-2.0)(15)/-20
= 1.5 kg
then add the other piece (2.0kg)
1.5 + 2.0 = 3.5 kg
The mass of firework before explosion is 3.50kg.
mass flying to right m1 = 2kg
v1 = 15 m/s
mass flying to left m2 = ?
v2 = - 20m/s
initial velocity u = 0
by conservation of linear momentum
m1v1+ m2v2 = (m1+m2 ) u
2x 15- m2x 20 = 0
m2 = 1.50kg
therefore mass of firework before explosion
m1+m2
2+ 1.50
= 3.50kg
What is mass?Mass is the amount of matter in a physical body. It also measures the body's inertia, the resistance to acceleration when a net force is applied. The mass of an object also determines its gravitational force on other objects. The basic SI unit of mass is the kilogram.
Body mass is always constant. One way to calculate mass:
mass = volume × density. Weight is a measure of the gravitational force acting on a mass. The SI unit of mass is the "kilogram".
To learn more about mass, refer;
https://brainly.com/question/19694949
#SPJ2
Allocate birr 5000 among the three workers in the ratio 1/3 :1/6 and 5/12.
Answer:
1666.7 ETB (birr)
833.3 ETB (birr)
2083.3 ETB (birr)
Explanation:
The first worker
5000*1/3=1666.7
The second worker
5000*1/6=833.3
The third worker
5000*5/12=2083.3
Hope this helps :) ❤❤❤
an elastic cord 61 cm long when a weight of 75N hangs from it, but 85cm when a weight of 210N hangs from it. what is the spring constant of the cord
Answer:
560 N/m
Explanation:
F = kx
75 N = k (0.61 m − L)
210 N = k (0.85 m − L)
Divide the equations:
2.8 = (0.85 − L) / (0.61 − L)
2.8 (0.61 − L) = 0.85 − L
1.708 − 2.8L = 0.85 − L
0.858 = 1.8L
L = 0.477
Plug into either equation and find k.
75 = k (0.61 − 0.477)
k = 562.5
Rounded to two significant figures, k = 560 N/m.
The plates of a parallel-plate capacitor are maintained with a constant voltage by a battery as they are pushed together, without touching. How is the amount of charge on the plates affected during this process
Answer:
The amount of charge increases.
Explanation:
For a capacitor that has its plates still connected to a battery, the voltage on the capacitor remains constant. If the distance between the two plates of this capacitor is decreased, the capacitance will increase, and then the charge on the plate will increase in accordance with the relationship
Q =CV
From this relationship, if V is held constant, then Q has to increase for C to increase also.
A plane drops a package for delivery. The plane is flying horizontally at a speed of 120m/s,and the package travels 255 m horizontally during the drop. We can ignore air resistance.What is the package's vertical displacement during the drop?
Answer:
Package's vertical displacement(s) = 22.12 meter
Explanation:
Given:
Speed of plane = 120 m/s
Total distance = 255 m
Find:
Package's vertical displacement(s)
Computation:
Time taken = Distance / Speed
Time taken = Total distance / Speed of plane
Time taken = 255 / 120
Time taken = 2.125 s
Acceleration due to gravity(g) = 9.8 m/s²
Initial velocity (u) = 0
So,
Package's vertical displacement(s) = ut + (1/2)gt²
Package's vertical displacement(s) = (0)(2.125) + (1/2)(9.8)(2.125)²
Package's vertical displacement(s) = 22.12 meter
Answer: -22.1
Explanation:
I just did the Khan Academy and that was the answer, not the one provided by that one person. :)))
Resistor R1 and R2 are connected in parallel to an emf source that has negligible internal resistance. What happens to the current through R1 when the third resistor R3 is connected parallel with R1?
The current does not change.
All three resistors are connected directly to the power source, and are unaware of each other.
Please help asap. A soccer player can kick a 0.370 kg football at 55 km/h. How much work does the soccer player have to do on the ball in order to give it that much kinetic energy?
Answer: 43.2 J
Explanation:
Work = change in KE
initial KE = 0
final KE = 1/2mv^2 = 1/2(0.370 kg)(15.2778 m/s)^2 = 43.2 J
i'm not sure about sig figs though
A 24 cm radius aluminum ball is immersed in water. Calculate the thrust you suffer and the force. Knowing that the density of aluminum is 2698.4 kg / m3
Answer:
W =1562.53 N
Explanation:
It is given that,
Radius of the aluminium ball, r = 24 cm = 0.24 m
The density of Aluminium, [tex]d=2698.4\ kg/m^3[/tex]
We need to find the thrust and the force. The mass of the liquid displaced is given by :
[tex]m=dV[/tex]
V is volume
Weight of the displaced liquid
W = mg
[tex]W=dVg[/tex]
So,
[tex]W=dg\times \dfrac{4}{3}\pi r^3\\\\W=2698.4\times 10\times \dfrac{4}{3}\times \pi \times (0.24)^3\\\\W=1562.53\ N[/tex]
So, the thrust and the force is 1562.53 N.
A physics professor uses an air-track cart of mass m to compress a spring of constant k by an amount x from its equilibrium length. The air-track has negligible friction. When she lets go, the spring launches the cart. What cart velocity should she expect after it is launched by the spring
Answer:
v = √k/m x
Explanation:
We can solve this exercise using the energy conservation relationships
starting point. Fully compressed spring
Em₀ = [tex]K_{e}[/tex] = ½ k x²
final point. Cart after leaving the spring
[tex]Em_{f}[/tex] = K = ½ m v²
Em₀ = Em_{f}
½ k x² = ½ m v²
v = √k/m x
A wall in a house contains a single window. The window consists of a single pane of glass whose area is 0.15 m2 and whose thickness is 7 mm. Treat the wall as a slab of the insulating material Styrofoam whose area and thickness are 17 m2 and 0.20 m, respectively. Heat is lost via conduction through the wall and the window. The temperature difference between the inside and outside is the same for the wall and the window. Of the total heat lost by the wall and the window, what is the percentage lost by the window
Answer:
88 %
Explanation:
The rate of heat loss by a conducting material of thermal conductivity K, cross-sectional area,A and thickness d with a temperature gradient ΔT is given by
P = KAΔT/d
The total heat lost by the styrofoam wall is P₁ = K₁A₁ΔT₁/d₁ where K₁ =thermal conductivity of styrofoam wall 0.033 W/m-K, A₁ = area of styrofoam wall = 17 m², ΔT₁ = temperature gradient between inside and outside of the wall and d₁ = thickness of styrofoam wall = 0.20 m
The total heat lost by the glass window is P₂ = K₂A₂ΔT₂/d₂ where K₂ =thermal conductivity of glass window pane wall 0.96 W/m-K, A₂ = area of glass window pane = 0.15 m², ΔT₂ = temperature gradient between inside and outside of the window and d₂ = thickness of glass window pane = 7 mm = 0.007 m
The total heat lost is P = P₁ + P₂ = K₁A₁ΔT₁/d₁ + K₂A₂ΔT₂/d₂
Now, since the temperatures of both inside and outside of both window and wall are the same, ΔT₁ = ΔT₂ = ΔT
So, P = K₁A₁ΔT/d₁ + K₂A₂ΔT/d₂
Since P₂ = K₂A₂ΔT₂/d₂ = K₂A₂ΔT/d₂is the heat lost by the window, the fraction of the heat lost by the window from the total heat lost is
P₂/P = K₂A₂ΔT/d₂ ÷ (K₁A₁ΔT/d₁ + K₂A₂ΔT/d₂)
= 1/(K₁A₁ΔT/d₁÷K₂A₂ΔT/d₂ + 1)
= 1/(K₁A₁d₂÷K₂A₂d₁ + 1)
= 1/[(0.033 W/m-K × 17 m² × 0.007 m ÷ 0.96 W/m-K × 0.15 m² × 0.20 m) + 1]
= 1/(0.003927/0.0288 + 1)
= 1/(0.1364 + 1)
= 1/1.1364
= 0.88.
The percentage is thus P₂/P × 100 % = 0.88 × 100 % = 88 %
The percentage of heat lost by window of the total heat is 88 %
help me helpppp the last words are experience a total
Answer:
False
Explanation:
Total internal reflection is a condition that occurs when light travels from dense medium to less dense medium.
From the table given in the question above,
Refractive Index of Whale oil = 1.460
Refractive Index of vacuum = 1
From the above, we can see that the whale oil has a higher Refractive Index than vacuum. This implies that the whale oil is denser than the vacuum.
Therefore, total internal reflection will occur when light travels from whale oil to vacuum because the whale oil is denser than the vacuum.
Theere is more role of the moon than sun to occur tides in oceans why?
Help
Answer:
Because ocean tides are the effect of ocean water responding to a gravitational gradient, the moon plays a larger role in creating tides than does the sun. But the sun's gravitational gradient across the earth is significant and it does contribute to tides as well.
i hope this help i
i try to explain and like i sayed i hope this help u.
Answer:
the moon
Explanation:
ive passed the grade you learned this in
Two kilograms of nitrogen (N2) at 25°C is contained in a 0.62 m3 rigid tank. This tank is connected by a valve to a 0.16 m3 rigid tank containing 0.8 kg of oxygen (O2) at 127°C. The valve is opened, and the gases are allowed to mix, achieving an equilibrium state at 87°C.
initial pressures of N2 is 5.7293 bar and O2 is 5.2 bar.
the final pressure is 6.44 bar.
the magnitude of the heat transfer for the process is 162.8 kJ, and the direction of energy flow is going in.
What is the entropy change for the mixing process, in kJ/K?
Answer:
Explanation:
For entropy change the formula is
ΔS = ΔQ / T
ΔQ = Δ H
ΔS = Δ H / T
Given
Δ H = + 162.8 kJ
We can take equilibrium temperature as average temperature of the whole process
So, T = 273 + 87 = 360 K
ΔS = Δ H / T
= 162.8 kJ / 360
= + 0.508 kJ / K .
When the magnitude of the heat transfer for the process is 162.8 kJ, Then the entropy change for the mixing process, in kJ/K is = + 0.508 kJ / K
What is Entropy change?
For The entropy change, the formula is
Then ΔS = ΔQ / T
After that ΔQ = Δ H
Then ΔS = Δ H / T
Given as per question are:
Then Δ H = + 162.8 kJ
Now We can take equilibrium temperature as average temperature of the whole process are:
So, T is = 273 + 87 = 360 K
Then ΔS = Δ H / T
After that = 162.8 kJ / 360
Therefore, = + 0.508 kJ / K.
Find more information about Entropy change here:
https://brainly.com/question/17241209