A closed system is one which no matter can enter or exit. True or false
False. In a closed system, matter can not enter or exit that is there is no change in the matter of the system.
Three types of systems exist in nature:
1. Open System: In this system, the matter can interact with the surroundings or matter can enter or exit the system from the surrounding. Similarly, the energy of the system also interacts with its surroundings and can be lost or gained.
For example oceans etc.
2. Closed system: In this system, the matter is unable to interact with the surroundings that are matter can't exit or enter the system. While the energy of the system is able to interact with the surroundings.
For example Earth etc
3. Isolated system: In this system, both matter and energy are unable to interact with the surrounding. There is no exchange between matter and the energy of surroundings.
For example thermos-teel bottles etc.
Learn more about Open Systems:
https://brainly.com/question/28891854
#SPJ4
k of 0.02911(m hr). if the initial concentration is 3.13 m, what is the concentration after 3.00 hours? your answer should have three significant figures (round your answer to two decimal places).
The concentration after 3.00 hours is 2.88 m.
To solve this problem, we will use the formula for the rate of a first-order reaction:
rate = k[A]
where k is the rate constant and [A] is the concentration of the reactant. We are given k = 0.02911(m/hr) and [A] = 3.13 m. We want to find the concentration after 3.00 hours, which we'll call [A'].
We can use the integrated rate law for a first-order reaction:
ln[A'] = -kt + ln[A]
where ln is the natural logarithm. Plugging in the given values, we get:
ln[A'] = -0.02911(m/hr) * 3.00 hr + ln[3.13 m]
Simplifying, we get:
ln[A'] = -0.08733 + 1.147
ln[A'] = 1.059
To solve for [A'], we'll take the inverse natural logarithm of both sides:
[A'] = e^(1.059)
[A'] = 2.884
Rounding to three significant figures, we get:
[A'] = 2.88 m
To learn more about : concentration
https://brainly.com/question/28564792
#SPJ11
mercury has the widest variation in surface temperatures between night and day of any planet in the solar system.
Mercury has the widest variation in surface temperatures between night and day of any planet in the solar system.
This statement is true. Mercury experiences the greatest temperature variation between night and day due to several factors. The main reasons are its proximity to the Sun, slow rotation, and lack of atmosphere.
During the daytime, temperatures on Mercury can reach up to 800°F (430°C) due to its close proximity to the Sun. This extreme temperature difference is due to the fact that Mercury's thin atmosphere is unable to regulate temperature and its slow rotation causes one side of the planet to be constantly facing the sun while the other is in perpetual darkness.
At night, temperatures can drop as low as -290°F (-180°C) because of its slow rotation and the lack of an atmosphere to retain heat. This results in the widest variation in surface temperatures between night and day of any planet in our solar system.
To know more about Mercury Variations in surface temperature:
https://brainly.com/question/16117265
#SPJ11
Mercury indeed has the widest variation in surface temperatures between night and day of any planet in the solar system. This is primarily due to its thin atmosphere, which cannot effectively retain heat, leading to extreme temperature fluctuations.
Mercury, being the closest planet to the sun, experiences extreme variations in temperature between its day and night sides. During the day, when the sun is overhead, the surface temperature on Mercury can rise to a scorching 430°C (800°F), which is hot enough to melt lead. However, as Mercury rotates and the sun sets, the temperature drops drastically to as low as -180°C (-290°F) at night.
The main reason for this extreme temperature variation is that Mercury has no atmosphere to regulate its surface temperature. Unlike Earth, which has an atmosphere that helps to distribute heat around the planet, Mercury's surface is directly exposed to the sun's radiation. This means that when the sun is shining on Mercury's surface, it heats up quickly and intensely, causing the temperature to rise to extreme levels.
Overall, the lack of an atmosphere and Mercury's proximity to the sun are the main factors contributing to the extreme temperature variations on the planet.
Learn more about atmosphere here:
https://brainly.com/question/11192430
#SPJ11
a carving in metal that is soaked with acid, inked, and stamped on paper
The process you are referring to is called etching. Etching is a technique in which a design is carved into a metal plate using tools such as needles or acid. Once the design is carved, the plate is soaked in an acid solution, which eats away at the exposed metal to create grooves.
After the acid bath, the plate is cleaned and dried, and ink is applied to the surface. The ink is worked into the grooves created by the acid, and any excess ink is wiped away from the surface. The plate is then placed on a press, and a sheet of paper is carefully placed on top of it. Pressure is applied to the paper and the plate, which transfers the ink from the grooves onto the paper, creating a print.
Etching allows for great flexibility in creating fine art prints, as the artist can use a variety of techniques to create different line qualities, textures, and tonal effects. Additionally, multiple copies of the same image can be made from a single plate, making etching a popular printmaking technique among artists.
Learn more about etching here:
https://brainly.com/question/29808648
#SPJ11
The term for a carving in metal that is soaked with acid, inked, and stamped on paper is called etching.
What is the process of Etching?Etchings are a type of printmaking where the artist creates a design by using acid to etch lines into a metal plate. Once the plate is inked, the ink is pushed into the etched lines, and the plate is stamped onto paper, transferring the ink and creating a print. Etchings can be highly detailed and precise and are often used in fine art prints. The acid bites into the exposed metal areas, creating recessed lines and textures on the plate. The plate is then inked and wiped, leaving ink only in the etched lines and textures. Finally, the plate is pressed onto paper to transfer the ink, creating a print. Etching is a versatile printmaking technique that allows for detailed and intricate designs to be transferred onto paper, and it has been used by artists for centuries to create a wide range of artistic prints.
To know more about Etching:
https://brainly.com/question/18064419
#SPJ11
the sds for 1-octanol is provided here. (links to an external site.) is 1-octanol a combustible liquid?
True. 1-octanol is a combustible liquid with a flashpoint of 86°C and an auto-ignition temperature of 258°C, according to the provided SDS.
The SDS (Safety Data Sheet) for 1-octanol indicates that it is a combustible liquid. According to the SDS, 1-octanol has a flashpoint of 86°C (187°F) and an auto-ignition temperature of 258°C (496°F). These values suggest that 1-octanol can easily ignite in the presence of an ignition source and may burn at relatively low temperatures. Additionally, the SDS provides information on the fire and explosion hazards associated with 1-octanol and recommends appropriate handling procedures and precautions to minimize the risk of fire or explosion. Therefore, it is important to handle 1-octanol with care and follow appropriate safety protocols when working with this substance.
To learn more about combustible liquid, refer:
https://brainly.com/question/28222891
#SPJ4
The complete question is:
the SDS for 1-octanol is provided here. (links to an external site.) is 1-octanol a combustible liquid? True or False.
which of the following processes is not spontaneous? select one: a. a smoker's smokes gathers around the smoker. b. a woman enters a room. shortly thereafter her perfume can be smelled by those on the other side of the room. c. leaves decay. d. a lighted match burns. e. water evaporates from an open container on a dry day (low humidity).
A woman enters the room, so choice (b) is accurate. Immediately after, individuals on the opposite side of the room may smell her perfume.
Why can we smell the perfume that someone inside the space sprayed?Diffusion: When fragrance particles mingle with air particles. The odorous gas's particles are free to move fast in any direction due to diffusion. So, a room fills with the scent of perfume.
What causes you to think someone has just left the room?We can smell perfume when we open a bottle of it in a room, even from a fair distance away. This is due to the perfume's gas moving from high concentration areas to low concentration areas when the bottle is opened.
To know more about smell visit:-
https://brainly.com/question/14454576
#SPJ1
which observation best describes the physical appearance of a compound when the end of its melting point range is reached? the compound begins to convert to a liquid. the compound completely converts to a liquid. the compound begins to evaporate.
A compound turns completely into a liquid this observation best describes the physical appearance of a compound when it reaches the end of its melting point range. Here option B is the correct answer.
When a solid compound is heated, it undergoes a process called melting in which it transforms into a liquid state. The melting point of a compound is the temperature at which it changes from a solid to a liquid state. The melting process is characterized by a range of temperatures over which the compound is observed to be partially or fully melted.
The observation that best describes the physical appearance of a compound when the end of its melting point range is reached is B - the compound completely converts to a liquid. At the end of the melting point range, the compound has absorbed enough heat energy to fully overcome the intermolecular forces that hold its constituent particles together in a solid state, resulting in the complete transformation of the compound into a liquid.
This state is characterized by the loss of a crystalline structure, where the particles are free to move about and slide past each other, leading to an increased fluidity and mobility of the compound. At this stage, the compound is fully melted and can be poured or transferred into a new container in its liquid form.
To learn more about melting points
https://brainly.com/question/28902417
#SPJ4
Complete question:
Which observation best describes the physical appearance of a compound when the end of its melting point range is reached?
A - the compound begins to convert to a liquid.
B - the compound completely converts to a liquid.
C - the compound begins to evaporate.
what is the maximum amount of heat in joules that 23 grams of water at 95oc can lose before freezing completely?
23 grams of water at 95°C can lose a maximum of 8883.64 Joules of heat before freezing completely.
To answer your question, we need to calculate the heat loss required to lower the temperature of 23 grams of water from 95 degrees Celsius to 0 degrees Celsius, which is the freezing point of water. The specific heat capacity of water is 4.184 Joules per gram per degree Celsius.
So, the initial energy of the water is:
E1 = m x c x ΔT
E1 = 23 g x 4.184 J/g°C x (95°C - 0°C)
E1 = 8883.64 J
Where E1 is the initial energy of the water, m is the mass of water, c is the specific heat capacity of water, and ΔT is the change in temperature.
The final energy of the water at 0°C is:
E2 = m x c x ΔT
E2 = 23 g x 4.184 J/g°C x (0°C - 0°C)
E2 = 0 J
So, the maximum amount of heat in joules that 23 grams of water at 95°C can lose before freezing completely is:
ΔE = E1 - E2
ΔE = 8883.64 J - 0 J
ΔE = 8883.64 J
Learn more about joules here: brainly.com/question/25982371
#SPJ11
you have 400 grams (g) of a substance with a half life of 10 years. how much is left after 100 years?
After 100 years, there will be 6.25 grams of the substance remaining.
What is half life?Half-life is the time it takes for half of the radioactive atoms in a sample to decay or for the concentration of a substance to decrease by half.
Amount remaining = initial amount x (1/2)^(number of half-lives)
In this case, half-life of the substance is 10 years, which means that after 10 years, half of the substance will have decayed. After another 10 years (20 years total), half of remaining substance will decay, leaving 1/4 of the original amount. After another 10 years (30 years total), half of that remaining amount will decay, leaving 1/8 of the original amount. This process continues every 10 years.
To find the amount of substance remaining after 100 years, we need to know how many half-lives have occurred in that time: 100 years / 10 years per half-life = 10 half-lives
Amount remaining = 400 g x (1/2)¹⁰= 6.25 g
Therefore, after 100 years, there will be 6.25 grams of the substance remaining.
To know more about half life, refer
https://brainly.com/question/25750315
#SPJ1
F-actin is a polymer of G-actin monomers and exhibits symmetry. (T/F)
F-actin is a polymer of G-actin monomers and exhibits symmetry is a False statement.
A class of globular, multifunctional proteins called actin creates the thin filaments in muscle fibrils as well as the microfilaments in the cytoskeleton. Its mass is around 42 kDa, and its diameter ranges from 4 to 7 nm; it is present in almost all eukaryotic cells, where it may be detected in concentrations of over 100 M.
The monomeric subunit of two different types of filaments in cells—thin filaments, a component of the contractile apparatus in muscle cells, and microfilaments, one of the three main elements of the cytoskeleton—is an actin protein. Both G-actin and F-actin, which are present either as a free monomer termed G-actin (globular) or as a component of a linear polymer microfilament known as F-actin (filamentous), are necessary for such crucial cellular processes.
Learn more about Actin:
https://brainly.com/question/23185374
#SPJ4
F-actin is a polymer of G-actin monomers and exhibits symmetry is a False statement.
A class of globular, multifunctional proteins called actin creates the thin filaments in muscle fibrils as well as the microfilaments in the cytoskeleton. Its mass is around 42 kDa, and its diameter ranges from 4 to 7 nm; it is present in almost all eukaryotic cells, where it may be detected in concentrations of over 100 M.
The monomeric subunit of two different types of filaments in cells—thin filaments, a component of the contractile apparatus in muscle cells, and microfilaments, one of the three main elements of the cytoskeleton—is an actin protein. Both G-actin and F-actin, which are present either as a free monomer termed G-actin (globular) or as a component of a linear polymer microfilament known as F-actin (filamentous), are necessary for such crucial cellular processes.
Learn more about Actin:
brainly.com/question/23185374
#SPJ11
Question:
The Volume (V) of gas varies
directly as the temperature (T) and
inversely as the pressure (P). If the
volume is 225 cm³ when the
temperature is 300 K and the
pressure is 100 N/cm², what is the
volume when the temperature
drops to 270 K and the pressure is
150 N/cm²?
The volume of the gas when the temperature drops to 270 K and the pressure is 150 N/cm², is 135 cm³
How do I determine the volume of the gas?
The following data were obtained from the question.
Initial volume of gas (V₁) = 225 cm³Initial temperature of gas (T₁) = 300 KInitial pressure of gas (P₁) = 100 N/cm²New temperature (T₂) = 270 KNew pressure (P₂) = 150 N/cm²New volume of gas (V₂) = ?The new volume of the gas can be obtained by using the combined gas equation as illustrated below:
P₁V₁ / T₁ = P₂V₂ / T₂
(100 × 225) / 300 = (150 × V₂) / 270
Cross multiply
300 × 150 × V₂ = 100 × 225 × 270
Divide both side by (300 × 150)
V₂ = (100 × 225 × 270) / (300 × 150)
V₂ = 135 cm³
Thus, the volume of the gas is 135 cm³
Learn more about volume:
https://brainly.com/question/14560487
#SPJ1
What is the density of hydrogen sulfide (H2S) at 0.7 atm and 322 K?
Answer:
0.9g/L.
Explanation:
To calculate the density of hydrogen sulfide (H2S) at 0.7 atm and 322 K, we can use the ideal gas law:
PV = nRT
where P is the pressure in atmospheres (atm), V is the volume in liters (L), n is the number of moles of gas, R is the universal gas constant (0.08206 L·atm/(mol·K)), and T is the temperature in Kelvin (K).
We can rearrange this equation to solve for the number of moles of gas:
n = PV / RT
Next, we can use the molar mass of H2S (34.08 g/mol) to convert the number of moles to mass:
mass = n × molar mass
Finally, we can divide the mass by the volume to obtain the density:
density = mass/volume
Let's assume a volume of 1 L (since the volume is not given in the question). Then we have:
P = 0.7 atm
T = 322 K
R = 0.08206 L·atm/(mol·K)
molar mass of H2S = 34.08 g/mol
First, we calculate the number of moles of H2S using the ideal gas law:
n = PV / RT
n = (0.7 atm) (1 L) / (0.08206 L·atm/(mol·K) × 322 K)
n = 0.0265 mol
Next, we calculate the mass of H2S using the number of moles and the molar mass:
mass = n × molar mass
mass = 0.0265 mol × 34.08 g/mol
mass = 0.9 g
Finally, we calculate the density of H2S:
density = mass/volume
density = 0.9g/1 L
density = 0.9 g/L
Therefore, the density of hydrogen sulfide (H2S) at 0.7 atm and 322 K is approximately 0.9g/L.
each of the following can act as both an brönsted acid and a brönsted base except:
(A) HCO3
(B) NH4+
(C) HS
(D) H2PO4
The answer is (C) HS.
Each of the other options can donate a proton (act as a Brönsted acid) in certain conditions and accept a proton (act as a Brönsted base) in other conditions. However, HS is only capable of acting as a Brönsted base and accepting a proton, but it cannot donate a proton and act as a Brönsted acid.
Out of the given options, the one that cannot act as both an acid and a base is (C) HS. This is because HS can only act as a brönsted acid by donating a proton to a brönsted base, but it cannot act as a brönsted base by accepting a proton from a brönsted acid. This is because it lacks a lone pair of electrons on the sulfur atom, which is necessary for accepting a proton.
On the other hand, [tex]HCO_{3}[/tex] ,[tex]NH_{4}[/tex]+, and [tex]H_{2}[/tex][tex]O_{4}[/tex]P can all act as both brönsted acids and bases depending on the reaction conditions.
Learn more about Brønsted acid here:
https://brainly.com/question/24065957
#SPJ11
(B) NH4⁺, cannot act as both a Brønsted acid and a Brønsted base.
What is Bronsted Acid-Base pairs?
A Brønsted acid is a species that can donate a proton (H⁺), while a Brønsted base is a species that can accept a proton (H⁺).
(A) HCO3⁻ can act as an acid by donating a proton to form CO3²⁻ or as a base by accepting a proton to form [tex]H_{2}CO_{3}[/tex].
(C) HS⁻ can act as an acid by donating a proton to form S²⁻ or as a base by accepting a proton to form [tex]H_{2}S[/tex].
(D) H2PO4⁻ can act as an acid by donating a proton to form HPO4²⁻ or as a base by accepting a proton to form [tex]H_{3}PO_{4}[/tex].
However,
(B) NH4⁺ can only act as a Brønsted acid by donating a proton to form [tex]NH_{3}[/tex] but cannot act as a Brønsted base since it has no lone pair of electrons to accept a proton.
To know more about Bronsted Theory:
https://brainly.com/question/148529
#SPJ11
how many moles of naf must be dissolved in 1.00 liter of a saturated solution of pbf2 at 25˚c to reduce the [pb2 ] to 1 x 10–6 molar? (ksp pbf2 at 25˚c = 4.0 x 10–8)
The moles of NaF that must be dissolved in 1.00 liter of a saturated solution of PbF₂ at 25˚C to reduce the [Pb²⁺] to 1 x 10⁻⁶ molar is 2.0 x 10⁻⁵.
The solubility product expression for PbF₂ is given by:
Ksp = [Pb²⁻][F-]²At equilibrium, the product of the ion concentrations must be equal to the solubility product constant. We are given that the [Pb²⁺] in the saturated solution is 1 x 10⁻⁶ M. Therefore, we can use the Ksp expression to calculate the concentration of F- in the solution:
Ksp = [Pb²⁺][F⁻]²4.0 x 10⁻⁸ = (1 x 10⁻⁶)([F⁻]²)[F⁻]² = 4.0 x 10⁻²[F⁻] = 2.0 x 10⁻¹Now, we can calculate the amount of NaF needed to reduce the [F⁻] concentration to 2.0 x 10⁻¹ M. Since NaF is a 1:1 electrolyte, the concentration of F- will be equal to the concentration of NaF added.
Number of moles of NaF = (2.0 x 10⁻¹) mol/L x 1.00 L = 2.0 x 10⁻¹ molesHowever, we need to dissolve this amount of NaF in a saturated solution of PbF₂. Therefore, we need to check that the amount of NaF we added will not exceed the maximum amount that can dissolve in the solution at 25˚C.
To learn more about solubility, here
https://brainly.com/question/29661360
#SPJ4
How many molecules of carbon dioxide gas, CO2, are found in 0.125 moles
There are 7.52 x 10^22 molecules of carbon dioxide gas, CO2, in 0.125 moles.
The number of molecules in a given number of moles can be calculated using Avogadro’s number, which is approximately 6.022 x 10^23. This number represents the number of particles (atoms or molecules) in one mole of a substance.
To calculate the number of molecules in 0.125 moles of CO2, we can multiply the number of moles by Avogadro’s number: 0.125 moles x (6.022 x 10^23 molecules/mole) = 7.52 x 10^22 molecules.
Avogadro’s number is a fundamental constant in chemistry and is used in many calculations involving moles and molar mass.
To learn more about carbon dioxide,
brainly.com/question/3049557
we must perform dilutions of absorbance values above 1.00 since not enough light is getting through the sample as it is heavily concentrated with solutes question 7 options: true false
True. Absorbance values above 1.00 indicate that the sample is heavily concentrated with solutes, which can limit the amount of light that passes through the sample.
Dilution is necessary to reduce the concentration of solutes in the sample and allow more light to pass through, enabling accurate measurement of the absorbance values.
Dilution involves adding a solvent to the sample to decrease its concentration while maintaining the same proportion of solutes. The diluted sample can then be re-analyzed to obtain absorbance values within the linear range of the spectrophotometer.
It is important to note that proper dilution factors must be calculated and applied accurately to avoid errors in the final results. Dilution is a commonly used technique in many scientific fields, including biochemistry, molecular biology, and environmental science.
To learn more about : solutes
https://brainly.com/question/25326161
#SPJ11
a sample of nobr was placed on a 1.00l flask containing no no or br 2 at equilibrium the flask contained
At equilibrium, the concentrations of NO, Br2, and NOBr in the flask will remain constant. However, without specific values for the initial concentration of NOBr or the equilibrium constant (Kc), it's not possible to determine.
.Based on the provided information, it seems that a sample of NOBr was placed in a 1.00 L flask at equilibrium, which means that the NOBr has decomposed into NO and Br2.
At equilibrium, the concentrations of NO, Br2, and NOBr in the flask will remain constant. However, without specific values for the initial concentration of NOBr or the equilibrium constant (Kc), it's not possible to determine the exact concentrations of these substances in the flask.
Visit here to learn more about equilibrium : https://brainly.com/question/4289021
#SPJ11
A sample of NOBr being placed in a 1.00 L flask containing no NO or Br2 at equilibrium, I'll first provide the balanced chemical equation for the reaction:
[tex]2 NOBr (g) ⇌ 2 NO (g) + Br2 (g)[/tex]
At equilibrium, the concentrations of the reactants and products remain constant. To determine the concentrations of NOBr, NO, and Br2 at equilibrium, we need to follow these steps:
1. Write the expression for the equilibrium constant (Kc) based on the balanced chemical equation:
[tex]Kc = [NO]^2 [Br2] / [NOBr]^2[/tex]
2. Set up an ICE (Initial, Change, Equilibrium) table to determine the equilibrium concentrations of the species involved in the reaction. The initial concentrations of NO and Br2 are 0 since they are not initially present in the flask.
NOBr NO Br2
I C0 0 0
C -2x +2x +x
E C0-2x 2x x
3. Substitute the equilibrium concentrations from the ICE table into the Kc expression:
[tex]Kc = (2x)^2 * x / (C0-2x)^2[/tex]
4. To solve for x, you need the value of Kc for the reaction. Look up the Kc value for this reaction in a reference or use provided information. Once you have Kc, substitute it into the equation and solve for x.
5. Calculate the equilibrium concentrations of NOBr, NO, and Br2 by substituting the value of x back into the ICE table:
[NOBr] = C0-2x
[NO] = 2x
[Br2] = x
By following these steps, you can determine the concentrations of NOBr, NO, and Br2 in the 1.00 L flask at equilibrium.
To know more about equilibrium constant (Kc):
https://brainly.com/question/29260433
#SPJ11
naoh is a hygroscopic solid, which means that it can absorb water from its surroundings, therefore it is important to
As a result, it is important to store NaOH in a dry and cool place, away from any sources of moisture or water.
NaOH, also known as sodium hydroxide, is a highly hygroscopic solid. This means that it can easily absorb moisture from its surroundings, including the air. When NaOH absorbs water, it can become more corrosive and potentially dangerous.
This is why it is also important to handle NaOH with care and wear appropriate protective gear, such as gloves and goggles. Additionally, any spills or leaks should be cleaned up immediately and properly disposed of according to local regulations.
By following these precautions, NaOH can be safely used in a variety of applications, including in the production of soap, paper, and textiles.
To learn more about : water
https://brainly.com/question/19491767
#SPJ11
aldehydes and ketones prefer to fragment by ___ which produces a resonance stabilized acylium ion
Aldehydes and ketones prefer to fragment by cleavage of the C-C bond adjacent to the carbonyl group, which produces a resonance-stabilized acylium ion.
Aldehydes and ketones have a carbonyl gathering (C=O) in their sub-atomic design, which is energized because of the distinction in electronegativity among carbon and oxygen particles. The carbonyl gathering can go through different compound responses, for example, nucleophilic expansion, decrease, and fracture. Discontinuity of aldehydes and ketones includes the cleavage of the C bond neighboring the carbonyl gathering, which prompts the development of a reverberation settled acylium particle.
This response is leaned toward on the grounds that the subsequent acylium particle is settled by reverberation structures, which disperse the positive charge among various iotas in the particle. This adjustment makes the response exceptionally exothermic and expands its rate.
To learn more about aldehydes and ketones, refer:
https://brainly.com/question/12308782
#SPJ4
Aldehydes and ketones prefer to fragment by cleavage of the C-C bond adjacent to the carbonyl group, which produces a resonance-stabilized acylium ion.
Aldehydes and ketones have a carbonyl gathering (C=O) in their sub-atomic design, which is energized because of the distinction in electronegativity among carbon and oxygen particles. The carbonyl gathering can go through different compound responses, for example, nucleophilic expansion, decrease, and fracture. Discontinuity of aldehydes and ketones includes the cleavage of the C bond neighboring the carbonyl gathering, which prompts the development of a reverberation settled acylium particle.
This response is leaned toward on the grounds that the subsequent acylium particle is settled by reverberation structures, which disperse the positive charge among various iotas in the particle. This adjustment makes the response exceptionally exothermic and expands its rate.
To learn more about aldehydes and ketones, refer:
brainly.com/question/12308782
#SPJ4
Darlene is a dancer with ankle pain and a considerable amount of swelling. She
MOST LIKELY has what muscle disorder?
which acid in table 14.2 is most appropriate for preparation of a buffer solution with a ph of 3.7? explain your choice.
We can create a buffer solution with a pH of 3.7 by using formic acid as the buffer system's acid component.
What pH does a buffer solution have?To keep fundamental conditions in place, these buffer solutions are used. A weak base and its salt are combined with a strong acid to create a basic buffer, which has a basic pH. Aqueous solutions of ammonium hydroxide and ammonium chloride at equal concentrations have a pH of 9.25. These solutions have a pH greater than seven.
Why may the pH of a buffered solution resist changing?When little amounts of acid or base are supplied, buffers can resist pH changes, because they have an acidic component (HA) to neutralise OH- ions and a basic component (A-) to neutralise H+ ions, they are able to accomplish this.
To know more about buffer solution visit:-
https://brainly.com/question/24262133
#SPJ1
the molar solubility of pbi 2 is 1.5 × 10 −3 m. calculate the value of ksp for pbi 2 .4.5 x 10 -6
The value of Ksp for PbI2 is 4.05 × 10^-8 if the molar solubility of PBI 2 is 1.5 × 10 −3 m.
The molar solubility of PBI 2 = 1.5 × 10 −3 m
The solubility product constant = 2 .4.5 x 10 -6
The solubility product constant (Ksp) for PbI2 can be estimated using the molar solubility of PbI2, the stoichiometry of the equilibrium equation is:
[tex]PbI2(s) = Pb2+(aq) + 2I-(aq)[/tex]
The equation for Ksp is:
Ksp = [tex][Pb2+][I-]^2[/tex]
[Pb2+] = S = 1.5 × 10−3 M,
[I-] = 2S = 3 × 10−3 M
The stoichiometric coefficient of I- is 2. Substituting these values into the Ksp equation we get:
Ksp =[tex](1.5 × 10^-3) × (3 × 10^-3)^2[/tex]
Ksp = 4.05 × 10^-8
Therefore, we can conclude that the value of Ksp for PbI2 is 4.05 × 10^-8.
To learn more about Molar Solubility
https://brainly.com/question/31479331
#SPJ4
The value of Ksp for PbI2 is 3.375 × 10^-9 or 4.5 x 10 -6. The expression for the solubility product constant (Ksp) of a sparingly soluble salt such as PbI2 is: Ksp = [Pb2+][I-]^2
where [Pb2+] and [I-] are the molar concentrations of the lead ion and iodide ion, respectively, in a saturated solution of PbI2.
Given that the molar solubility of PbI2 is 1.5 × 10^-3 M, we can assume that [Pb2+] and [I-] in the saturated solution are also equal to 1.5 × 10^-3 M. Therefore, we can substitute these values into the Ksp expression and solve for Ksp:
Ksp = (1.5 × 10^-3 M)(1.5 × 10^-3 M)^2
Ksp = 3.375 × 10^-9
So the value of Ksp for PbI2 is 3.375 × 10^-9 or 4.5 x 10 -6 (if that was a typo in the question).
Learn more about soluble salt here: brainly.com/question/9537918
#SPJ11
What volume of chlorine gas at 46.0◦C and
1.60 atm is needed to react completely with
5.20 g of sodium to form NaCl?
The volume of chlorine gas at 46.0°C and 1.60 atm that is needed to react completely with 5.20 g of sodium to form NaCl is 1.85 L
How do i determine the volume of chlorine gas needed?We'll begin by obtaining the mole of 5.20 g of sodium. Details below:
Mass of Na = 5.20 gMolar mass of Na = 23 g/mol Mole of Na =?Mole = mass / molar mass
Mole of Na = 5.20 / 23
Mole of Na = 0.226 mole
Next, we shall determine the mole of chlorine gas needed. Details below:
2Na + Cl₂ -> 2NaCl
From the balanced equation above,
2 moles of Na reacted with 1 mole of Cl₂
Therefore,
0.226 mole of Na will react with = (0.226 × 1) / 2 = 0.113 mole of Cl₂
Finally, we shall determine the volume of chlorine gas, Cl₂ needed. This is shown below:
Temperature (T) = = 46 °C = 46 + 273 = 319 KPressure (P) = 1.60 atmGas constant (R) = 0.0821 atm.L/molKNumber of mole (n) = 0.113 moleVolume of chlorine gas, Cl₂ (V) =?PV = nRT
1.6 × V = 0.113 × 0.0821 × 319
Divide both sides by 1.6
V = (0.113 × 0.0821 × 319) / 1.6
V = 1.85 L
Thus, the volume of chlorine gas, Cl₂ needed is 1.85 L
Learn more about volume:
https://brainly.com/question/21838343
#SPJ1
if you theoretically performed the bromination of phenol with only one equivalent of br2 which product do you think would predominate
The product that would predominate in the bromination of phenol with only one equivalent of Br2 is the para-bromophenol.
If the bromination of phenol was performed with only one equivalent of Br2, it is more likely that the para product would predominate due to steric hindrance effects that make it difficult for the ortho product to form. The reaction of phenol with Br2 is an electrophilic aromatic substitution where Br+ attacks the electron-rich aromatic ring.
The ortho position is sterically hindered by the presence of the bulky -OH group, making it difficult for the incoming Br+ ion to attack this position. On the other hand, the para position is less hindered, and the incoming Br+ ion can easily attack this position, leading to the predominance of the para product.
Although some ortho product may still form due to the statistical probability of the reaction, it would not be as significant as the para product.
To learn more about bromination of phenol, here
https://brainly.com/question/31325887
#SPJ4
The complete question is:
Had you performed the bromination of phenol with only one equivalent of Br2, which product (ortho or para) do you think would predominate? Hint: think about probability and statistics.
determine the standard enthalpy change for the decomposition of hydrogen peroxide per mole of hydrogen peroxide.
The standard enthalpy change for the decomposition of hydrogen peroxide per mole of hydrogen peroxide is -98.2 kJ/mol.
when 1 mole of hydrogen peroxide (H2O2) ( H 2 O 2 ) undergoes decomposition, the heat evolved (ΔH) is −98.2kJ. − 98.2 k J . The molar mass of H2O2 H 2 O 2 is 34.015 g/mol. This means that the mass of 1 mole of H2O2 H 2 O 2 is 34.015 g.
This value is obtained from the standard enthalpy of formation of the products (H2 and O2) and the standard enthalpy of formation of the reactant (H2O2). Enthalpy of formation is the energy change that occurs when a compound is formed from its elements, in their standard states.
The difference between the enthalpies of formation of the products and the reactant is the enthalpy change for the reaction. In this case, the enthalpy change for the decomposition of hydrogen peroxide is -98.2 kJ/mol. This indicates that the decomposition of hydrogen peroxide is an exothermic reaction and it releases 98.2 kJ/mole of energy.
Know more about Hydrogen peroxide here
https://brainly.com/question/29102186#
#SPJ11
How many moles of caffeine, c8h10o2n4, are contained in a 100. Mg sample of caffeine? group of answer choices 0. 0085 0. 019 0. 51 0. 0028 0. 52
The number of moles of caffeine is 0.00052 mol
To calculate the number of moles of caffeine in a 100 mg sample, we need to use the formula:
moles = mass / molar massThe molar mass of caffeine (C₈H₁₀O₂N₄) is 194.19 g/mol. Converting the mass of the sample to grams (100 mg = 0.1 g), we can plug in the values and solve for moles:
moles = 0.1 g / 194.19 g/molmoles = 0.00052 molThe mole is widely used in stoichiometry calculations, which involve determining the amount of reactants needed to produce a certain amount of products or the amount of products produced from a certain amount of reactants. It is also used in the calculation of molar mass, which is the mass of one mole of a substance, and in the conversion between mass, moles, and number of entities in chemical reactions. Therefore, the number of moles of caffeine in a 100 mg sample of caffeine is 0.00052 moles.
To learn more about moles, here
https://brainly.com/question/26416088
#SPJ4
an 80 proof bottle of vodka is equal to ___ bv.
An 80-proof bottle of vodka is equal to 40% alcohol by volume (ABV).
Proof, which is twice the percentage of alcohol by volume (ABV), is a unit of measurement for the amount of alcohol in a liquid. As a result, 40% of the content of an 80-proof bottle of vodka is alcohol. Accordingly, only 40% of the liquid in the bottle is actual alcohol, while the other 60% is made up of water and other chemicals.
The ABV of a bottle of alcohol is crucial to understand since it establishes the potency and potential consequences of the beverage. Drinks with a higher ABV are stronger and may affect the body more strongly.
Learn more about alcohol:
brainly.com/question/28404655
#SPJ4
why would it be necessary to slowly add the sulfuric acid to the p-cresol/acetic acid mixture in the test tube? simply to be sure the correct volumes are used. the reaction is exothermic which may boil and splatter the acidic solution out of the test tube. since the density of sulfuric acid is less than that for acetic acid, it requires a slower reaction time. the reaction is endothermic and the solution may solidify if the sulfuric acid is added too quickly.
The correct answer is option D. All of the above. It is necessary to slowly add the sulfuric acid to the p-cresol/acetic acid mixture in the test tube to prevent any accidents or injuries.
If sulfuric acid is added too soon, the solution may boil and the acid will spew out of the test tube, perhaps resulting in burns.
Sulfuric acid is also an endothermic reaction, which means it takes energy from its surroundings and has the potential to crystallise or cause the solution to harden.
Last but not least, adding the sulfuric acid gradually enables more precise measurement of the supplied sulfuric acid volume.
It is crucial to gradually add the sulfuric acid to the test tube mixture of p-cresol and acetic acid as a result of all these considerations.
Complete Question:
Why would it be necessary to slowly add the sulfuric acid to the p-cresol/acetic acid mixture in the test tube?
Options:
A. To ensure accurate measurement of the volume of sulfuric acid added.
B. To prevent the solution from boiling and splattering the acidic solution out of the test tube.
C. To prevent the endothermic reaction from solidifying the solution.
D. All of the above.
To learn more about sulfuric acid visit:
https://brainly.com/question/10220770
#SPJ4
energetic molecules such as nadh and atp are often reactants of ____________ reactions.
Energetic molecules such as NADH and ATP are often reactants of exergonic reactions.
Exergonic reactions are those that discharge energy and have a harmful Gibbs-free energy change. In these reactions, the reactants have more free energy than the products, so the excess energy is cast in the state of heat. An exergonic reaction is a chemical reaction where the shift in the free energy is negative.
Energetic molecules like NADH and ATP store energy in their chemical adhesives, which can be emitted in exergonic reactions to drive endergonic responses that need energy input. Therefore, they are usually employed as reactants in exergonic reactions.
To learn more about Exergonic reactions
https://brainly.com/question/30800156
#SPJ4
one of the techniques used in this experiment was that of crystallization. when cooling a solution in the process of crystallization, why would an ice bath be preferable over cold water or ice alone? none of the answers shown are correct. ice is too cold and will freeze any solution. cold water would dilute the solution making it impossible for crystals to form. a mixture of ice and water will keep the temperature above freezing and will contact the entire portion of the container immersed in the ice/water mixture.
When conducting a crystallization process, it is important to cool the solution at a slow and controlled rate to encourage crystal formation.
An ice bath is preferable over cold water or ice alone because it can maintain a consistent low temperature without causing the solution to freeze solid. Ice alone is too cold and can cause the solution to freeze rapidly, preventing the formation of crystals. Cold water, on the other hand, is not able to maintain a consistent low temperature as the heat from the solution will quickly dissipate into the surrounding water, resulting in a slower cooling rate.
An ice bath, which is a mixture of ice and water, provides a more stable and uniform cooling environment for the solution, allowing for the crystals to form at a slower rate. Additionally, an ice bath can contact the entire portion of the container immersed in the mixture, ensuring that the solution is evenly cooled. Overall, an ice bath is the preferred method for cooling a solution during the process of crystallization.
know more about crystallization process here
https://brainly.com/question/29662937#
#SPJ11
complete question is:-
one of the techniques used in this experiment was that of crystallization. when cooling a solution in the process of crystallization, why would an ice bath be preferable over cold water or ice alone? none of the answers shown are correct. ice is too cold and will freeze any solution. cold water would dilute the solution making it impossible for crystals to form. a mixture of ice and water will keep the temperature above freezing and will contact the entire portion of the container immersed in the ice/water mixture. EXPLAIN.