catalase activity in the reaction can be detected by observing the formation of oxygen bubbles. true or false

The pH of the buffer solution after the addition of 0.020 mol of HCl is approximately 7.779.

A buffering agent is a substance that can withstand tiny additions of bases or acids without changing its pH. A weak acid with its conjugate base, and a base that is weak and its conjugate acid, make up the compound.

Small amounts of additional acid or base can be neutralised by the weakened acid or base while significantly altering the acidity of the solution in question. This is due to the fact that the acid that is weak and the base it conjugates with (or a base that is weak and its conjugated acid) exist in the solution in nearly equal proportions and can engage in a reversible process that preserves the pH..

To know more about buffer visit:

https://brainly.com/question/22821585

#SPJ1

The pressure of the gas is approximately 14.71 atm, which is closest to answer choice a) 15 atm.

We can use the ideal gas law to solve for the pressure of the gas:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in kelvins.

Substituting the given values, we get:

P(2.0 L) = (1.2 moles)(0.0821 L·atm/mol·K)(300 K)

Simplifying and solving for P, we get:

P = (1.2 moles)(0.0821 L·atm/mol·K)(300 K) / 2.0 L

P = 14.71 atm

Therefore, the pressure of the gas is approximately 14.71 atm, which is closest to answer choice a) 15 atm.

Learn more about ideal gas law ,

https://brainly.com/question/28257995

#SPJ4

If 1.2 moles of a gas occupy a volume of 2.0 L at 300 K,  the pressure of the gas is option a) 15 atm.

To solve this problem, we need to use the ideal gas law, which is PV = nRT.

P = pressure of the gas (in atm)
V = volume of the gas (in L)
n = number of moles of gas
R = universal gas constant (0.08206 L·atm/mol·K)
T = temperature of the gas (in K)

First, let's convert the given values into the correct units:

n = 1.2 moles
V = 2.0 L
T = 300 K

Now we can plug these values into the ideal gas law equation:

PV = nRT

P(2.0 L) = (1.2 mol)(0.08206 L·atm/mol·K)(300 K)

Simplifying this equation, we get:

P = (1.2 mol)(0.08206 L·atm/mol·K)(300 K)/(2.0 L)

P = 14.4 atm

Therefore, the pressure of the gas is approximately 14.4 atm.

None of the given answer choices match exactly with this value, but option a) is the closest at 15 atm.

To learn more about ideal gas law equation click here

brainly.com/question/4147359

#SPJ11

The amino acids that will never yield the positive score in the substitution matrix is the glycine, proline and the cysteine.

The Evolutionary relationships in between the proteins that would be identified through the substitution reaction, which will scores the replacement for the one amino acid with the another amino acid. The large positive score for the substitution matrix will be indicates that the substitution that occurs frequently.

The Amino acids are the molecules which will combine to form the proteins. The Amino acids and the proteins are the building blocks for the life. The Amino acids are the organic compounds which will contain the both the amino and the carboxylic acid functional groups.

To learn more about amino acids here

https://brainly.com/question/14830732

#SPJ4

The control tube that is used to compare to test broths 1, 2, and 3 in order to evaluate the effectiveness of the germicide is the positive control tube.

This control tube contains bacteria that are not exposed to the germicide and serves as a reference for the growth and viability of the bacteria in the absence of the germicide.

By comparing the growth and viability of the bacteria in the positive control tube to the growth and viability of the bacteria in the test broths, researchers can determine the effectiveness of the germicide in killing or inhibiting the growth of the bacteria.

It is important to use a positive control tube in order to establish a baseline for comparison and ensure accurate and reliable results

To learn more about : germicide

https://brainly.com/question/29316904

#SPJ11

The both local and the global effects of burning petroleum in the car engines are smog and the global warming.

The Global effects defines to the various effects at which the actions of the individuals, the businesses, and the governments will be on the environment and the society at the large. The Global effects will leads to the changes to the climate, the water cycle, the biodiversity, and the food production, and the other natural systems.

The Smog is the form of the air pollution and will be created by the reaction of the sunlight and with the emissions from the car exhausts.

To learn more about global effects here

https://brainly.com/question/22599236

#SPJ4

The CO2 come out of the six originally present in glucose in the process of Pyruvate is converted to Acetyl-CoA.

The biological process known as pyruvate decarboxylation, also known as the oxidative decarboxylation reaction, utilises pyruvate to create acetyl-CoA while simultaneously releasing NADH, a reducing equivalent, and carbon dioxide through decarboxylation.

This process serves as a bridge between glycolysis and the citric acid cycle in the majority of organisms. So, oxidative decarboxylation is the procedure employed to convert pyruvate to acetyl CoA.

An essential molecule in biology is pyruvate. It is a byproduct of the glucose metabolism process called glycolysis. One of two processes results in the breakdown of one glucose molecule into two pyruvate molecules, which are subsequently utilised to produce further energy.

Learn more about Pyruvate conversion:

https://brainly.com/question/28941347

#SPJ4

During the transition step, pyruvate is converted to acetyl-CoA through the removal of one carbon dioxide molecule.

This carbon dioxide is released from the pyruvate molecule itself, specifically from the carboxyl group (-COOH) that is cleaved during the process. The remaining two-carbon molecule then binds with coenzyme A (CoA) to form acetyl-CoA.

During the transition step, pyruvate is converted to acetyl-CoA and one carbon dioxide molecule is released. The CO2 comes from the decarboxylation of pyruvate, which involves the removal of a carboxyl group from the pyruvate molecule, ultimately releasing carbon dioxide as a byproduct.

The process of decarboxylating pyruvate, which involves removing a carboxyl group from the pyruvate molecule and ultimately releasing carbon dioxide as a byproduct, produces carbon dioxide as a byproduct.

Visit here to learn more about carboxyl group  : https://brainly.com/question/31319088
#SPJ11

The types of bonds being broken and formed will impact the overall energy of the reaction, and this can be determined by examining whether the reaction is endothermic or exothermic.

The type of bonds being broken and formed in a reaction will have a significant impact on the overall energy of the reaction. When strong bonds are broken, more energy is required as compared to breaking weaker bonds.

Similarly, when strong bonds are formed, more energy is released as compared to forming weaker bonds. If the reaction involves breaking strong bonds and forming weak bonds, it will be an endothermic reaction, meaning that it requires energy to occur.

Conversely, if the reaction involves breaking weak bonds and forming strong bonds, it will be an exothermic reaction, meaning that it releases energy.

To learn more about : energy

https://brainly.com/question/30083274

#SPJ11

10 kg.cm/s² is equivalent to 0.1 N when converted into newton.

The unit of force in the International System of Units (SI) is the newton (N). One Newton is defined as the amount of force required to accelerate a mass of one kilogram at a rate of one meter per second squared (1 N = 1 kg⋅m/s² ).

10 kg⋅cm/s²  can be converted to newtons using the following formula:

1 N = 1 kg⋅m/s²

First, we need to convert cm to meters, as the unit of force is in newtons, which is based on meters.

1 cm = 0.01 m

Therefore, 10 kg⋅cm/s² can be converted to:

10 kg × 0.01 m/s² = 0.1 kg⋅m/s²

Now, using the formula:

1 N = 1 kg⋅m/s²

We can convert 0.1 kg⋅m/s² to newtons:

0.1 kg⋅m/s² = 0.1 N

To learn more about newton follow the link:

https://brainly.com/question/12505464

#SPJ4

A chemical that causes abnormalities in a growing fetus is called a(n) teratogen .

The study of physiological abnormalities that develop throughout an organism's life is called teratology. In this area of medical genetics, teratogen-induced congenital dysmorphology syndromes are categorised.

Animal model systems, such as those used with rats, mice, rabbits, dogs, and monkeys, are used in studies to examine the teratogenic potential of environmental agents. Early teratologists subjected pregnant animals to environmental toxins while examining the developing foetuses for obvious visceral and skeletal deformities. The science of teratology is going to a more molecular level and looking for the mechanism(s) of action by which these agents function, even if this is still a component of the teratological evaluation methods today.

The related phrase "developmental toxicity" refers to any indications of abnormal development brought on by environmental harm.

Learn more about Teratogen:

https://brainly.com/question/14970129

#SPJ4

A chemical that causes abnormalities in a growing fetus is called a "teratogen."

A chemical that causes abnormalities in a growing fetus is called a teratogen. Teratogens are substances or environmental factors that can disrupt normal prenatal development, potentially leading to birth defects or other complications. Examples of teratogens include certain medications, alcohol, tobacco, radiation, and some infectious agents. Pregnant individuals should be cautious and consult healthcare providers when exposed to potential teratogens to minimize the risk of harming their developing fetus. Early detection and prevention are crucial in reducing the impact of teratogenic substances on fetal development.

To learn more about chemical click here

brainly.com/question/29762834

#SPJ11

The empirical formula of the compound is K2O.

We need to determine the ratio of atoms in the compound. Here, we are given the masses of potassium and oxygen that are produced by decomposing the compound.

From the given information, we know that

Mass of K = 19.55 g

Mass of O = 4.00 g

We can use these masses to determine the number of moles of each element:

Moles of K = 19.55 g / 39.10 g/mol (molar mass of K) = 0.500 mol

Moles of O = 4.00 g / 16.00 g/mol (molar mass of O) = 0.250 mol

Next, we need to find the simplest whole number ratio of K to O. To do this, we divide each number of moles by the smaller number of moles (in this case, 0.250 mol):

Moles of K / Moles of O = 0.500 mol / 0.250 mol = 2.00

This means that the ratio of K to O in the compound is 2:1.

Therefore, the empirical formula of the compound is K2O.

Learn more about empirical formula here : brainly.com/question/13058832

#SPJ1

As a result, the gas will be about 205 kelvin, or -68.5 degrees Celsius, in temperature.

If a gas's temperature is increased to 927°C, so its pneumatic cylinder will be. A gas has a temperature of 127°C at 2 atm and 2 litres of volume. O 6 atm.

One mole ($6.023 times 1023 typical particles) of the any gas at STP takes up 22.4L of space. A mole of any gas takes up 22.4 litres at standard pressure and temperature (273K and 1atm).

To know more about kelvin visit:

https://brainly.com/question/12183328

#SPJ1

The use of stable oxygen isotopes in reconstructing ancient climates is a powerful tool that has contributed greatly to our understanding of past environmental changes. However, it is important to consider other factors that may influence the isotopic composition of precipitation and to use multiple lines of evidence when making interpretations about past climate conditions.

Stable oxygen isotopes (specifically, oxygen-18 and oxygen-16) are commonly used in reconstructing ancient climates because they can provide information about temperature and precipitation patterns.

1) Oxygen-18 is less abundant than oxygen-16 and has a slightly higher atomic mass. This means that it is preferentially incorporated into precipitation that forms at colder temperatures, such as snow and ice.

2) The ratio of oxygen-18 to oxygen-16 in carbonate minerals, such as those found in shells and corals, can also be used to reconstruct past temperatures. This is because the incorporation of oxygen isotopes into these minerals is influenced by both temperature and the isotopic composition of the water in which the organism lived.

3) Oxygen isotopes can also provide information about past precipitation patterns. For example, in regions where the dominant source of precipitation is from ocean evaporation, the oxygen isotope composition of precipitation can reflect the isotopic composition of the ocean water.

For such more questions on Oxygen isotopes:

https://brainly.com/question/160068

#SPJ11

When drawing liquid out of an ampule the filter needle should be used. The correct answer is A, when drawing liquid out of an ampule.

Filter needles should be used when drawing liquid from an ampule as they help remove any glass particles that may have been introduced during the opening of the ampule.

It is not necessary to use a filter needle when drawing liquid out of a vial or a bigger syringe. In fact, using a filter needle when drawing liquid from a vial can cause unnecessary loss of medication due to the filter absorbing some of the liquid.

It is always important to follow proper technique when administering medication to ensure patient safety and proper dosing.

To learn more about : liquid

https://brainly.com/question/13116910

#SPJ11

The number of moles, atoms, and mass in the problems are calculated as below.

(8.30 x 10^23 atoms) / (6.022 x 10^23 atoms/mol) = 1.38 mol

(5.5 x 10^23 atoms) / (6.022 x 10^23 atoms/mol) = 0.914 mol

(3.4 mol) x (6.022 x 10^23 atoms/mol) = 2.05 x 10^24 atoms

(2.0 mol) x (6.022 x 10^23 atoms/mol) = 1.21 x 10^24 atoms

(2.5 mol) x (197.34 g/mol) = 493.35 g

(8.3 x 10^28 atoms) / (6.022 x 10^23 atoms/mol) = 1.38 x 10^6 mol

(1.38 x 10^6 mol) x (23.95 g/mol) = 3.30 x 10^7 g

(5 x 10^25 atoms) / (6.022 x 10^23 atoms/mol) = 8.30 mol

(5.67 mol) x (6.022 x 10^23 atoms/mol) = 3.42 x 10^24 atoms

More on number of atoms can be found here: https://brainly.com/question/1445383

#SPJ1

(a) Superheating is a phenomenon where a liquid is heated above its boiling point without actually boiling.

(b) Superheating and supercooling occur because they represent a state of thermodynamic instability

(a) This occurs when the liquid is free of impurities or nucleation sites that can trigger boiling. Supercooling is the opposite phenomenon, where a liquid is cooled below its freezing point without actually freezing. This occurs when the liquid is pure and there are no nucleation sites for the formation of ice crystals.
(b). In the case of superheating, the liquid is at a temperature above its boiling point but is prevented from boiling due to the absence of nucleation sites. In the case of supercooling, the liquid is at a temperature below its freezing point but is prevented from freezing due to the absence of nucleation sites. These phenomena can be observed in nature and can have practical applications in various fields, such as materials science and engineering.

learn  more about superheating Refer: https://brainly.com/question/24249319

#SPJ11

Superheating and supercooling are two phenomena that occur when a substance is heated or cooled beyond its boiling or freezing point, respectively.

Superheating is when a liquid is heated above its boiling point without boiling. This occurs because the liquid is in a stable state with no nucleation sites for bubbles to form. When a nucleation site is introduced, such as when the liquid is disturbed or when a foreign object is added, the liquid will rapidly boil and can potentially cause a dangerous explosion. Supercooling, on the other hand, is when a liquid is cooled below its freezing point without solidifying. This occurs because the liquid is also stable with no nucleation sites for ice crystals to form. When a nucleation site is introduced, such as when the liquid is agitated or when a foreign object is added, the liquid will rapidly freeze.These phenomena occur because a substance's boiling or freezing point is dependent on pressure, and when the pressure is decreased or increased, the boiling or freezing point will also change. Additionally, the lack of nucleation sites in a superheated or supercooled substance means that the substance is not able to transition to a new state until a nucleation site is introduced.

Learn more about Superheating here:

https://brainly.com/question/31496362

#SPJ11

The signs of ΔH and ΔS are related to the sign of ΔG, and an understanding of the sign of ΔG can provide information about the nature of the reaction and the effect of temperature on the thermodynamic parameters.

However, in general, the sign of ΔG (Gibbs free energy change) can provide information about the signs of ΔH and ΔS. The relationship between these three thermodynamic parameters is given by the following equation:

ΔG = ΔH - TΔS

where T is the temperature in Kelvin.

If ΔG is negative, then the reaction is spontaneous and the forward reaction is favored. This implies that the products have a lower free energy than the reactants. In this case, if the temperature is increased, the value of TΔS will become more positive, which means that the value of ΔH must become more negative in order for ΔG to remain negative.

This suggests that the reaction is exothermic (ΔH is negative) and that the entropy change is negative (ΔS is negative).

If ΔG is positive, then the reverse reaction is favored and the products have a higher free energy than the reactants. In this case, if the temperature is increased, the value of TΔS will become more negative, which means that the value of ΔH must become more positive in order for ΔG to remain positive. This suggests that the reaction is endothermic (ΔH is positive) and that the entropy change is positive (ΔS is positive).

learn more about thermodynamic parameters here:

https://brainly.com/question/31237925

#SPJ11

Answer:

Explanation:

289k ---- 11.8

257k ------ x (where x = volume at 257k)

x = [tex]\frac{257*11.8}{289}[/tex]

x = 10.49 I

therefore at, 257k the balloon will have a volume of 10.49

The energy of the photon needed to cause an electron in the 3s orbital to be excited to the 3p orbital is approximately 3.04 × [tex]10^{-18}[/tex] J (or about 1.90 eV).

To calculate the energy of a photon needed to cause an electron in the 3s orbital to be excited to the 3p orbital, we need to know the energy difference between these two orbitals.

The energy of an electron in a hydrogenic atom (an atom with one electron) can be calculated using the following formula:

[tex]E = - (Z^2 * Ry) / n^2[/tex]

where Z is the atomic number, Ry is the Rydberg constant (2.18 × [tex]10^{-18}[/tex]J), and n is the principal quantum number.

The energy difference between the 3s and 3p orbitals can be calculated by subtracting the energy of the 3s orbital from the energy of the 3p orbital.

For hydrogen, the energy of the 3s orbital is:

E(3s) = - ([tex]1^2[/tex]* 2.18 × [tex]10^{18}[/tex] J) / [tex]3^2[/tex]

E(3s) = - 0.242 ×[tex]10^{18}[/tex] J

And the energy of the 3p orbital is:

E(3p) = - ([tex]1^2[/tex] * 2.18 × [tex]10^{-18}[/tex] J) / 2^2

E(3p) = - 0.546 × [tex]10^{-18}[/tex] J

The energy difference between the two orbitals is:

ΔE = E(3p) - E(3s)

ΔE = (- 0.546 ×[tex]10^{18}[/tex]  J) - (- 0.242 ×[tex]10^{-18}[/tex] J)

ΔE = - 0.304 × [tex]10^{-18}[/tex]J

This energy difference represents the energy required to excite an electron from the 3s orbital to the 3p orbital.

To calculate the energy of the photon needed to provide this energy, we use the formula:

E = hν

where E is the energy of the photon, h is Planck's constant (6.626 × [tex]10^{-34}[/tex]J·s), and ν is the frequency of the photon.

Rearranging this formula to solve for the frequency of the photon, we get:

ν = E / h

Substituting the energy difference we calculated, we get:

ν = (- 0.304 × [tex]10^{18}[/tex] J) / (6.626 × [tex]10^{-34}[/tex] J·s)

ν = - 4.59 × [tex]10^{15}[/tex]Hz

Finally, to calculate the energy of the photon, we use the formula:

E = hν

Substituting the frequency we calculated, we get:

E = (6.626 ×[tex]10^{-34}[/tex] J·s) x (- 4.59 × [tex]10^{15}[/tex] Hz)

E = - 3.04 × [tex]10^{-18}[/tex]J

Therefore, the energy of the photon needed to cause an electron in the 3s orbital to be excited to the 3p orbital is approximately 3.04 × 10^-18 J (or about 1.90 eV).

Learn more about photon

https://brainly.com/question/20912241

#SPJ4

200 milliliters of a 3% solution can be made if 6 grams of solute are available.

1. To calculate the number of values that would be out of control due to random error, we can use the formula for the probability of a value falling outside of a certain number of standard deviations from the mean in a normal distribution. For two standard deviations, this probability is approximately 0.05, or 5%. So, out of 100 normal control values, we would expect around 5 of them to fall outside of the acceptable limit of error due to random deviation.
2. To find the 95% confidence interval, we can use the formula:
95% confidence interval = mean ± (1.96 x standard deviation / square root of sample size)
Plugging in the values given, we get:
95% confidence interval = 100 ± (1.96 x 1.8 / square root of sample size)
We don't know the sample size, so we can't solve for the exact confidence interval. However, we can say that as the sample size increases, the margin of error (the part in parentheses) will decrease, resulting in a narrower confidence interval.
3. To calculate the amount of solute needed to make a 3% solution, we need to know the concentration in grams per milliliter (g/mL). Assuming that the solute is dissolved in water (which has a density of 1 g/mL), we can use the formula:
concentration = mass of solute / volume of solution
Rearranging, we get:
volume of solution = mass of solute / concentration
Plugging in the values given, we get:
volume of solution = 6 g / 0.03 g/mL
Simplifying, we get:
volume of solution = 200 mL
Therefore, 200 milliliters of a 3% solution can be made if 6 grams of solute are available.

learn more about solutions here

https://brainly.com/question/30665317

#SPJ11

the molarity of the diluted solution is 0.27 M.if 124 ml of a 1.2 m glucose solution is diluted to 550.0 ml

To solve the problem, we can use the formula:

M1V1 = M2V

where M1 is the initial molarity, V1 is the initial volume, M2 is the final molarity, and V2 is the final volume.

Plugging in the values we have:

M1 = 1.2 M

V1 = 124 ml = 0.124 L

V2 = 550.0 ml = 0.550 L

Solving for M2:

M2 = (M1V1)/V2

= (1.2 M * 0.124 L)/0.550 L

= 0.27 M

A solution is a homogeneous mixture of two or more substances. In a solution, the solute is uniformly dispersed in the solvent. The solute is the substance that is being dissolved, and the solvent is the substance in which the solute is being dissolved. For example, in saltwater, salt is the solute and water is the solvent.

Learn more about solution here:

https://brainly.com/question/30665317

#SPJ12

The molarity of the diluted glucose solution is approximately 0.2705 M.

To find the molarity of the diluted glucose solution after 124 mL of a 1.2 M solution is diluted to 550.0 mL, you can use the dilution formula:
M1V1 = M2V2

where M1 is the initial molarity (1.2 M), V1 is the initial volume (124 mL), M2 is the final molarity, and V2 is the final volume (550.0 mL).

Rearrange the formula to solve for M2:

M2 = (M1*V1) / V2

Now, plug in the given values:
M2 = (1.2 M * 124 mL) / 550.0 mL
M2 = 148.8 mL / 550.0 mL
M2 = 0.2705 M

To know more about Molarity:

https://brainly.com/question/14581742

#SPJ11

The pH after 0.195 mol of NaOH is added to the buffer from part a is pH > 14.

To answer this question, we need to use the Henderson-Hasselbalch equation:
pH = pKa + log([A-]/[HA])
We were given the following information in part a: a buffer solution with a pKa of 5.00 and a concentration of 0.100 M for both the acid (HA) and its conjugate base (A-).
To determine the pH after adding 0.195 mol of NaOH to this buffer solution, we need to first calculate the new concentrations of the acid and its conjugate base:
- The initial moles of the acid (HA) and its conjugate base (A-) are both 0.100 M x 1.00 L = 0.100 mol.
- Adding 0.195 mol of NaOH will react with an equivalent amount of the acid, leaving behind the conjugate base. This means that the new amount of the acid will be 0.100 mol - 0.195 mol = -0.095 mol. However, this negative value doesn't make sense, so we should interpret it as meaning that all of the acid was used up and there is still 0.095 mol of NaOH remaining in the solution. The new amount of the conjugate base (A-) will be 0.100 mol + 0.195 mol = 0.295 mol.
- The new concentrations of the acid and its conjugate base are therefore:
[HA] = 0.000 mol/L
[A-] = 0.295 mol/L
Now we can substitute these values into the Henderson-Hasselbalch equation:
pH = 5.00 + log([0.295]/[0.000])
We cannot divide by zero, so we know that the pH will be very high (basic) because there is no acid left to keep the solution acidic. Taking the log of a very large number will also give us a very large positive value. Let's calculate it:
pH = 5.00 + log(∞)
pH = 5.00 + ∞
pH = ∞
However, we need to express the pH numerically to three decimal places. This means that we need to choose a convention for representing infinite values. One common convention is to use "pH = 14.000", since pH + pOH = 14. Another convention is to use "pH > 14", which indicates that the pH is higher than the highest possible value on the pH scale.
Therefore, the answer to the question is:
The pH after 0.195 mol of NaOH is added to the buffer from part a is pH > 14.

learn more about pH here

https://brainly.com/question/29775377

#SPJ11

The microbiologist needs to combine 9.39 mL of equimolar K2HPO4 and 690.61 mL of equimolar KH2PO4 to make 700.0 mL of pH 7.00 buffer.

To set up the pH 7.00 cushion, the microbiologist needs to consolidate equimolar measures of the corrosive (H2PO4-) and its form base (HPO42-), which can be accomplished utilizing the Henderson-Hasselbalch condition:

pH = pKa + log([A-]/[HA])

Where pH is the ideal pH of the cradle, pKa is the corrosive separation steady of the corrosive, and [A-]/[HA] is the proportion of the centralizations of the form base to the corrosive.

For this situation, the pKa1 an incentive for phosphoric corrosive is 2.15. Since the cushion should be arranged utilizing equimolar measures of K2HPO4 and KH2PO4, the [A-]/[HA] proportion is 1. Consequently, we can rework the Henderson-Hasselbalch condition to address for the proportion of the volumes of the two arrangements:

[V(HPO42-)/V(H2PO4-)] = [A-]/[HA] = 1

Subbing the pKa worth and settling for the proportion, we get:

[V(HPO42-)/V(H2PO4-)] = [tex]10^(pH-pKa)[/tex] = [tex]10^(7.00-2.15)[/tex] = 73.5

Since the volumes of the two arrangements should amount to 700.0 mL, we can communicate the volume of one arrangement as far as the other:

V(H2PO4-) = 700.0 mL/(1 + 73.5) = 9.39 mL

V(HPO42-) = 700.0 mL - V(H2PO4-) = 690.61 mL

Thusly, the microbiologist needs to consolidate 9.39 mL of the equimolar K2HPO4 arrangement with 690.61 mL of the equimolar KH2PO4 answer for get ready 700.0 mL of the pH 7.00 cradle.

To learn more about buffer, refer:

https://brainly.com/question/31112281

#SPJ4

The complete question is:

A microbiologist is preparing a medium on which to culture E. coli bacteria. She buffers the medium at pH 7.00 to minimize the effect of acid-producing fermentation. What volumes of equimolar aqueous solutions of K_2HPO_4 and KH_2PO_4 must she combine to make 250.0 mL of the pH 7.00 buffer? K_a values for phosphoric acid: K_a_1 = 7.2 times 10^-3 K_a_2 = 6.3 times 10^-8 K_a_3 = 4.2 times 10^-13 Volume H_2PO_4^- = mL Volume HPO_4^2- = mL

Petrochemicals are used to create the raw materials used to produce all of the answer choices provided in the question, which includes pesticides, plastics, soaps, and computers. Petrochemicals are chemical compounds that are derived from petroleum or natural gas. These compounds are widely used in various industries to create the raw materials needed for the production of a wide range of products.

Pesticides are chemicals used to kill or control pests, and many of them are made from petrochemicals. Plastics are also made from petrochemicals and are used to make a variety of products such as packaging materials, toys, and automotive parts. Soaps are made from a combination of petrochemicals and natural oils, and they are used for personal hygiene and cleaning purposes. Petrochemicals are also used to create components of computers, such as circuit boards and other electronic parts.

In conclusion, petrochemicals are an essential component in the production of various consumer goods and industrial products, and they play a significant role in modern society.

For more such questions on Petrochemicals, visit:

brainly.com/question/28540307

#SPJ11

The two acids that result from the nitrogen oxides in car depletion and contribute to dangerous rain are nitric dangerous(acid) (HNO3) and nitrous damaging(acid) (HNO2).

These acids are shaped when the nitrogen oxides (NO and NO2) respond to water interior the environment.

The chemical conditions for the course of activity of these acids are:

Nitric dangerous(acid):

NO2 + H2O -> HNO3

In this condition, nitrogen dioxide (NO2) reacts with water to create nitric damage (HNO3).

Nitrous dangerous(acid):

NO + H2O -> HNO2

In this condition, nitric oxide (NO) responds with water to create nitrous damage (HNO2).

Both nitric damaging and nitrous dangerous are solid acids and can contribute to the causticity of water.

When rain falls, these acids break down the interior of the water globules and lower the pH of the water, making it more acidic. This might have negative impacts on the environment and can hurt plants and sea-going life. 

To know more about Nitric and Nitrous acids refer to this :

https://brainly.com/question/1576794

#SPJ4

Answer:

data given

molarity 3.2m

moles 50mol

Required volume

Explanation:

from

molarity =mole/volume

3.2=50/v

v=15.62

:.volume is15.62dm^3

The number of grams of water that are produced from the moles of H₂ is 108.09 grams .

From the balanced chemical equation, we see that 2 moles of H₂ reacts to produce 2 moles of H₂O. Therefore, 1 mole of H₂ reacts to produce 1 mole of H₂O.

To find the number of moles of water produced from 6.00 moles of H₂, we can use the stoichiometry of the balanced chemical equation:

6.00 moles H₂ x (2 moles H₂O / 2 moles H₂) = 6.00 moles H₂O

So 6.00 moles of H₂ produces 6.00 moles of H₂O. To convert moles of water to grams, we need to use the molar mass of water:

Molar mass of H₂O = 2(1.008 g/mol) + 1(15.999 g/mol) = 18.015 g/mol

So, the mass of 6.00 moles of H₂O is:

6.00 moles H₂O x 18.015 g/mol = 108.09 g

Find out more on grams produced at https://brainly.com/question/20703641

#SPJ1

The limiting reagent is t-butanol, and 0.013 mole of BHT can be formed.

To determine the limiting reagent, we need to calculate the number of moles of each reactant. For p-cresol, we have 1.506 g / 108.14 g/mol = 0.0139 mol. For t-butanol, we have 1.992 g / 74.12 g/mol = 0.0269 mol.

Since the mole ratio between t-butanol and BHT is 2:1, and we have fewer moles of t-butanol, it is the limiting reagent. Therefore, the maximum number of moles of BHT that can be formed is equal to half the number of moles of t-butanol, which is 0.013 mol.

To learn more about limiting reagent, here

https://brainly.com/question/11848702

#SPJ4

sodium hydroxide

cobalt (II) phosphide

lead (IV) carbonate

Magnesium fluoride

lithium sulfite

ammonium phosphate

iron (II) oxide

calcium sulfate

silver nitride

sodium sulfide

1H NMR spectroscopy can be used to distinguish between isomers of a given molecular formula based on the differences in their chemical environments and the resulting shifts in their NMR signals.

In the case of compounds F, G, and K, which all have the molecular formula C13H18O, there are several ways in which their 1H NMR spectra could differ.

Firstly, the number of unique proton environments in each compound can differ, leading to a difference in the number of signals observed in their respective spectra. For example, if compound F contains a methyl group, a methylene group, and an isolated proton, it would exhibit three distinct signals in its 1H NMR spectrum, whereas if compound G contains a cyclohexane ring with no substituents, it would only exhibit a single signal corresponding to the equivalent protons in the ring.

Secondly, the chemical shifts of the protons in each compound can differ due to differences in the electronic environment around them. For example, a proton in a more electronegative environment will experience a downfield shift, whereas a proton in a more shielded environment will experience an upfield shift. Therefore, compounds F, G, and K could exhibit different chemical shifts for their equivalent protons, allowing for differentiation between them.

Learn more about spectroscopy ,

https://brainly.com/question/28523860

#SPJ4

1H NMR spectroscopy can be used to distinguish between isomers of a given molecular formula based on the differences in their chemical environments and the resulting shifts in their NMR signals.

In the case of compounds F, G, and K, which all have the molecular formula C13H18O, there are several ways in which their 1H NMR spectra could differ.

Firstly, the number of unique proton environments in each compound can differ, leading to a difference in the number of signals observed in their respective spectra. For example, if compound F contains a methyl group, a methylene group, and an isolated proton, it would exhibit three distinct signals in its 1H NMR spectrum, whereas if compound G contains a cyclohexane ring with no substituents, it would only exhibit a single signal corresponding to the equivalent protons in the ring.

Secondly, the chemical shifts of the protons in each compound can differ due to differences in the electronic environment around them. For example, a proton in a more electronegative environment will experience a downfield shift, whereas a proton in a more shielded environment will experience an upfield shift. Therefore, compounds F, G, and K could exhibit different chemical shifts for their equivalent protons, allowing for differentiation between them.

Learn more about spectroscopy ,

brainly.com/question/28523860

#SPJ11

When all the hydrochloric acid (HCl) has reacted, we can obtain the zinc chloride solution from the reaction mixture by the adding ZnO to the diluted HCl.

The mixture defines the combination of the two or the more the substances or the chemical compounds which are present in the proportion, and it can be visible with the na-ked eyes.

We can obtain ZnCl solution in the reaction mixture and when all the hydrochloric acid that is HCl is  reacted by the addition of the zinc oxide that is ZnO to the diluted HCl and this is because it will sparingly soluble in the water.

To learn more about mixture here

https://brainly.com/question/24647756

#SPJ4