(Comparing Data LC) : The histograms display the frequency of temperatures in two different locations in a 30-day period.

A graph with the x-axis labeled Temperature in Degrees, with intervals 60 to 69, 70 to 79, 80 to 89, 90 to 99, 100 to 109, 110 to 119. The y-axis is labeled Frequency and begins at 0 with tick marks every one unit up to 14. A shaded bar stops at 10 above 60 to 69, at 9 above 70 to 79, at 5 above 80 to 89, at 4 above 90 to 99, and at 2 above 100 to 109. There is no shaded bar above 110 to 119. The graph is titled Temps in Sunny Town.
-
A graph with the x-axis labeled Temperature in Degrees, with intervals 60 to 69, 70 to 79, 80 to 89, 90 to 99, 100 to 109, 110 to 119. The y-axis is labeled Frequency and begins at 0 with tick marks every one unit up to 14. A shaded bar stops at 10 above 60 to 69, at 9 above 70 to 79, at 5 above 80 to 89, at 4 above 90 to 99, and at 2 above 100 to 109. There is no shaded bar above 110 to 119. The graph is titled Temps in Sunny Town.

Question:
When comparing the data, which measure of variability should be used for both sets of data to determine the location with the most consistent temperature?
-
Possible Answers:
(A) IQR, because Sunny Town is symmetric
(B) IQR, because Beach Town is skewed
(C) Range, because Sunny Town is skewed
(D) Range, because Beach Town is symmetric

The total number of lattice points for the equation of the line y = -2x + 18 with given condition is equal to 10.

The equation of the line is y = -2x + 18.

To find the lattice points on this line,

find integer solutions for x and y that satisfy this equation.

Substituting y = -2x + 18 into the equation, we get,

-2x + 18 = y

We know that x and y are both non-negative integers,

so start by setting y = 0 and solving for x,

⇒-2x + 18 = 0

⇒-2x = -18

⇒x = 9

So one lattice point on the line is (9, 0).

Now ,substitute this value of x back into the equation to find the corresponding value of y,

y = -2(9) + 18

y = 0

So the lattice point is (9, 0).

Repeat this process by setting y = 1, 2, 3, and so on,

Until we find all the lattice points on the line.

For y = 1, we get,

⇒-2x + 18 = 1

⇒-2x = -17

⇒x = 8.5

But x must be a non-negative integer,

so there are no lattice points for y = 1.

For y = 2,

⇒-2x + 18 = 2

⇒-2x = -16

⇒x = 8

So the lattice point is (8, 2).

For y = 3,

⇒-2x + 18 = 3

⇒-2x = -15

⇒x = 7.5

Again, there are no lattice points for y = 3.

Continue this process until we have checked all possible values of y.

The lattice points on the line are,

(9, 0)

(8, 2)

(7, 4)

(6, 6)

(5, 8)

(4, 10)

(3, 12)

(2, 14)

(1, 16)

(0, 18)

Therefore, there are 10 lattice points on the line y = -2x + 18 that satisfy the conditions x ≥ 0 and y ≥ 0.

learn more about lattice points here

brainly.com/question/30684239

#SPJ4

The given question is incomplete, I answer the question in general according to my knowledge:

If x ≥ 0 and y ≥ 0 , how many lattice points does the line y = -2x + 18 pass through?

the guy wires are 850 feet long. We can use the Pythagorean theorem to solve this problem.

what is Pythagorean theorem  ?

The Pythagorean theorem is a mathematical concept that describes the relationship between the sides of a right triangle. It states that in any right triangle, the square of the length of the hypotenuse (the side opposite the right angle) is equal to the sum of the squares of the lengths of the other two sides.

In the given question,

We can use the Pythagorean theorem to solve this problem. The Pythagorean theorem states that in a right triangle, the square of the length of the hypotenuse (the longest side) is equal to the sum of the squares of the lengths of the other two sides.

In this case, the tower, the guy wires, and the ground form a right triangle. Let's call the length of the guy wires "x". Then we can set up the following equation:

x² = 840² + (130)²

Simplifying and solving for x, we get:

x² = 705600 + 16900

x² = 722500

x = √722500

x = 850

Therefore, the guy wires are 850 feet long.

To know more about Pythagorean theorem , visit:

https://brainly.com/question/14930619

#SPJ1

(a) The correct trigonometric ratio to use is the tangent ratio (tan).

(b) The trigonometric equation is tan(17°) = Opposite/Adjacent.

(c) tan(17°) = Opposite/Adjacent

tan(17°) = 150/Adjacent

Adjacent = 150/tan(17°)

Adjacent = 150/0.3045

Rotate triangle △C'D'E' counterclockwise by approximately -0.785 radians about the origin:

[tex]x1' = 1 \times cos(-0.785) - (-4) \times sin(-0.785) \approx 0.436[/tex]

[tex]y1' = 1 \times sin(-0.785) + (-4) \times cos(-0.785) \approx -3.678[/tex]

[tex]x2' = -7 \times cos(-0.785) - 8[/tex]

The given point [tex]s C(2, -8), D(-6, 4),[/tex] and [tex]E(0, 4)[/tex] form the triangle △CDE, and the points U(1, -4), V(-3, 2), and W(0, 2) form the triangle △UVW, with △CDE being the preimage of △UVW.

To represent the transformation algebraically, we can use a combination of translations and rotations.

Translation:

To translate a point (x, y) by a vector (h, k), we add h to the x-coordinate and k to the y-coordinate of the point.

To transform triangle △CDE to triangle △UVW, we can first translate triangle △CDE by a vector (h, k) to obtain triangle △C'D'E', where C' = C + (h, k), D' = D + (h, k), and E' = E + (h, k).

Since the coordinates of C are (2, -8) and the coordinates of U are (1, -4), we can calculate the translation vector (h, k) as follows:

[tex]h = 1 - 2 = -1[/tex]

[tex]k = -4 - (-8) = 4[/tex]

So the translation vector is [tex](-1, 4).[/tex]

Rotation:

To rotate a point (x, y) by an angle θ counterclockwise about the origin, we use the following formulas:

[tex]x' = x \times \cos(\theta) - y times \sin(\theta)[/tex]

[tex]y' = x \times \sin(\theta) + y \times \cos(\theta)[/tex]

To transform triangle △C'D'E' to triangle △UVW, we can apply a rotation of angle θ counterclockwise about the origin to triangle △C'D'E', where C' = (x1', y1'), D' = (x2', y2'), and E' = (x3', y3'). Since the coordinates of C' are (2, -8) after translation, and the coordinates of U are (1, -4), we can calculate the rotation angle θ as follows:

[tex]\theta = atan2(y1' - y2', x1' - x2') - atan2(y1 - y2, x1 - x2)= atan2((-8 + 4) - (-4), (2 + 1) - (-6 + 3)) - atan2((-8) - (-4), 2 - (-6))[/tex]

Using a calculator, we can find θ to be approximately -0.785 radians.

So, the algebraic representation of the transformation that maps triangle [tex]\triangle CDE[/tex] to triangle [tex]\triangle UVW[/tex]  is:

Translate triangle △CDE by the vector (-1, 4) to obtain triangle △C'D'E':

[tex]C' = (2, -8) + (-1, 4) = (1, -4)[/tex]

[tex]D' = (-6, 4) + (-1, 4) = (-7, 8)[/tex]

[tex]E' = (0, 4) + (-1, 4) = (-1, 8)[/tex]

Therefore, Rotate triangle △C'D'E' counterclockwise by approximately -0.785 radians about the origin:

[tex]x1' = 1 \times cos(-0.785) - (-4) \times sin(-0.785) \approx 0.436[/tex]

[tex]y1' = 1 \times sin(-0.785) + (-4) \times cos(-0.785) \approx -3.678[/tex]

[tex]x2' = -7 \times cos(-0.785) - 8[/tex]

Learn more about coordinate here:

https://brainly.com/question/16634867

#SPJ1

The length of the pendulum rod (L) can be calculated using the formula L = g/(4π²f²) and the length of the rod between the two weights at a tempo of 192 bpm is approximately 0.101 meters.

Starting with the equation

f = √(g/L)/(2π)

Squaring both sides, we get

f² = g/L(4π²)

Rearranging, we get

L = g/(4π²f²) ------ (1)

Therefore, the length of the pendulum rod (L) can be calculated using the formula L = g/(4π²f²).

Given, f = 1.6 Hz, which means there are 2 beats per second or 120 beats per minute (bpm).

Using the formula in equation (1)

L = g/(4π²f²)

L = 9.8/(4π²(1.6)²)

L = 0.101 meters (rounded to three decimal places)

Therefore, the length of the rod between the two weights at a tempo of 192 bpm is approximately 0.101 meters.

To know more about length here

https://brainly.com/question/9112078

#SPJ4

We need approximately 12 servings of Designer Whey and 2 servings of Muscle Milk to obtain a 7-day supply that provides exactly 262 grams of protein and 54 grams of carbohydrates.

Let x be the number of servings of Designer Whey and y be the number of servings of Muscle Milk needed to obtain a 7-day supply that provides exactly 262 grams of protein and 54 grams of carbohydrates.

From the information given, we know that each serving of Designer Whey provides 20 grams of protein and 3 grams of carbohydrates, and each serving of Muscle Milk provides 16 grams of protein and 9 grams of carbohydrates.

Therefore, we can set up the following system of equations:

20x + 16y = 262

3x + 9y = 54

To solve for x and y, we can use any method of solving a system of equations. For example, we can use substitution:

From the second equation, we can solve for x in terms of y:

x = (54 - 9y)/3 = 18 - 3y

Substituting this into the first equation, we get:

20(18 - 3y) + 16y = 262

Simplifying, we get:

80y = 182

Solving for y, we get:

y = 2.275

Substituting this into the equation x = 18 - 3y, we get:

x = 12.175

To learn more about equations click on,

https://brainly.com/question/29118974

#SPJ4

Answer:

[tex]y = 2x - 1[/tex]

Step-by-step explanation:

We can represent this line in an equation in slope-intercept form:

[tex]y = mx + b[/tex],

where [tex]m[/tex] is the line's slope (rise over run), and [tex]b[/tex] is the y-coordinate of its y-intercept.

First, we can solve for the line's slope:

slope = rise / run = 2/1 = 2

Next, we can identify the y-coordinate of the y-intercept by looking at the vertical axis' value when the red line crosses it:

-1

Finally, we can put these two pieces of information together to form an equation in slope-intercept form:

[tex]\boxed{y = 2x - 1}[/tex]

The answer is True which means the choice between numerical integration approaches depends on what the data looks like and what computational expense you can tolerate.

The choice of numerical integration procedures is influenced by several criteria, including the nature of the data being integrated and the computing expenditure that may be accepted. If the function being integrated, for example, is smooth and well-behaved, a basic technique such as the trapezoidal rule or Simpson's rule may be adequate and computationally efficient.

If the function is extremely oscillatory or involves singularities, more complex approaches such as adaptive quadrature or Monte Carlo methods may be required to correctly integrate it. Furthermore, the size of the data collection and the processing resources available will influence the numerical integration method used.

Overall, choosing the best numerical integration strategy necessitates a careful evaluation of these numerous criteria to assure accuracy and efficiency in the integration of data.

Learn more about Numerical Integration Approaches:

https://brainly.com/question/31424436

#SPJ4

Answer:

C

Step-by-step explanation:

using the rule of logarithms

[tex]log_{b}[/tex] x = n ⇒ x = [tex]b^{n}[/tex]

and [tex]x^{0.5}[/tex] = [tex]\sqrt{x}[/tex]

given

[tex]log_{x}[/tex] 8 = 0.5 , then

8 = [tex]x^{0.5}[/tex] = [tex]\sqrt{x}[/tex] ( square both sides )

8² = ( [tex]\sqrt{x}[/tex] )²

64 = x

The directionality of the alternative hypothesis and the support offered by the sample data determine whether the null hypothesis is likewise rejected at the 5% level of significance for a related one-tailed test.

When the two-tailed test rejects the null hypothesis, it means that the sample data, regardless of how we look at it, support the null hypothesis.. A one-tailed test, however, simply considers the evidence in one way. As a result, the null hypothesis should be used if the sample data only show evidence that the alternative hypothesis is true in one direction (for example, greater than).

To know more about Null hypothesis, visit,

https://brainly.com/question/4436370

#SPJ4

The probability of both selected room air conditioners are defective is equal to 0.0952 rounded to four decimal places.

Total number of room air conditioners in shipment = 15

Number of defective room air conditioners = 5

The probability of the first air conditioner being defective is 5/15.

Since there are 5 defective air conditioners out of a total of 15.

After one air conditioner has been inspected,

There will be 4 defective air conditioners left out of a total of 14.

The probability of the second air conditioner also being defective, given that the first one was defective, is 4/14.

Probability of both air conditioners being defective.

Multiply probability of first air conditioner being defective by probability of second air conditioner being defective.

Given by first one was defective,

P(both defective) = (5/15) x (4/14)

Simplifying this expression ,

P(both defective) = 2/21

Therefore, the probability that the selected two air conditioners are both defective is 0.0952 rounded to four decimal places.

learn more about probability here

brainly.com/question/30613202

#SPJ4

The number line that shows the number of miles where A is less expensive has a solution of x > 60

From the question, we have the following parameters that can be used in our computation:

Option    Daily Cost ($) Cost per mile ($)

   A               25                   0.15  

   B                10                    0.40

So, the cost functions are

A = 25 + 0.15x

B = 10 + 0.4x

Where x is the number of miles

When A is less expensive, we have

25 + 0.15x < 10 + 0.4x

Evaluate the like terms

15 < 0.25x

So, we have

0.25x > 15

Divide

x > 15/0.25

Evaluate

x > 60

Hence, the number line is (a)

Read more about number line at

https://brainly.com/question/24644930

#SPJ1

In the given triangle the 3 trigonometric ratios are:

(A) Sinθ = 3/5, (B) Cosθ = 4/5, and (Tanθ = 3/4)

The trigonometric functions in mathematics are real functions that connect the right-angled triangle's angle to the ratios of its two side lengths.

They are extensively employed in all fields of geometry-related study, including geodesy, solid mechanics, celestial mechanics, and many others.

In general, arcsine, arccosine, tangent, cotangent, secant, and cosecant functions are used to express the inverses of sine, cosine, tangent, cotangent, secant, and cosecant functions.

So, according to t the given triangle, the 3 trigonometric ratios would be:

Sinθ = B/H

Sinθ = 27/45

Sinθ = 3/5

Cosθ = P/H

Cosθ = 36/45

Cosθ = 4/5

Tanθ = B/P

Tanθ = 27/36

Tanθ = 3/4

Therefore, in the given triangle the 3 trigonometric ratios are:

(A) Sinθ = 3/5, (B) Cosθ = 4/5, and (Tanθ = 3/4)

Know more about trigonometric ratios here:

https://brainly.com/question/24349828

#SPJ1

Answer:

Step-by-step explanation:

we find the area of ​​the rectangle with the formula WxL

7 x 4 = 28 m^2

we find the area of ​​the triangle with the formula 1/2 b x h

1/2 7 x 4 =

3.5 x 4 = 14 m^2

we add the two areas

28 + 14 = 42m^2   (your answer)

Fred should use a critical value of 2.145 and a standard error of the mean of 2.84 to construct a 95% confidence interval for the average length of movies he watches

To construct a confidence interval for the population mean length of movies watched by Fred, we can use the following formula

Confidence interval = sample mean +/- (critical value) x (standard error)

where the standard error of the mean (SE) is calculated as:

SE = sample standard deviation / sqrt(sample size)

Since Fred's sample size is 15 and he wants a 95% confidence interval, we need to find the critical value for a t-distribution with 14 degrees of freedom (n-1), which can be obtained from a t-distribution table or calculator.

Using a t-distribution calculator with 14 degrees of freedom and a 95% confidence level, we find the critical value to be 2.145.

Next, we can calculate the standard error of the mean as

SE = 11 / sqrt(15) = 2.84

Learn more about confidence interval here

brainly.com/question/29680703

#SPJ4

The probability for the binomial random variable X are,

Expression and value P(X = 6) is (²⁰C₆)(0.3)^6 (0.7)^20-6 and 0.1916.

Probability for P(X<6) is equal to 0.8084.

Upper bound for P(X<6) is P(X =5) and upper bound for normal approximation is one value less than the given value.

In the binomial random variable,

n = 20

p =0.3

(1 - p ) = 1 - 0.3

          = 0.7

Using the formula we have,

(ⁿCₓ)(p)^x (1-p)^n-x

For X= 6

Expression for P( X =6 ) is equal to,

(²⁰C₆)(0.3)^6 (0.7)^20-6

=  (38760) × 0.000729 × 0.00678223072

=0.1916

Probability of P(X<6)

= P(X=0) +  P(X=1)+ P(X=2)+ P(X=3)+ P(X=4)+ P(X=5)

= 1 - P(X =6 )

= 1 - 0.1916

=0.8084

Upper bound for above part is X= 5 as it is one less than 6.

Normal approximation could choose a different upper bound based on accuracy .

Choose the upper bound to be one less than the required value .

Therefore, the probability for the given binomial random variable is ,

P(X = 6) is (²⁰C₆)(0.3)^6 (0.7)^20-6 and value of P(X =6) = 0.1916

P(X<6) =0.8084.

Upper bound is P(X =5) when probability is P(X =6).

Yes ,we choose different upper bound normal approximation as upper bound is one less than the value.

Learn more about probability here

brainly.com/question/31297775

#SPJ4

The above question is incomplete, the complete question is:

Let X be a binomial random variable with n = 20 and p = .3.

A. Write the expression for P(X = 6) in terms of the formula (n/x)(p)^x (1-p)^n-x , then evaluate it using your calculator.

B. Using probability notation, P(X = x), write out all the probabilities you'd need to add up in order to calculate P(X < 6), and then evaluate it using your calculator.

C. For part B, why did you choose the upper bound that you did? If you were using the normal approximation could you choose a different upper bound? Why or why not?

The graph that correctly displays the data is a histogram. The correct option is b.

The correct graph to display this data would be a bar graph with the title "Favorite Sport" the x-axis labeled "Sport" and the y-axis labeled "Number of Students."

The first bar should be labeled "Tennis" going to a value of 17, the second bar labeled "Soccer" going to a value of 12, the third bar labeled "Baseball" going a value of 27, and the fourth bar labeled "Basketball" going to a value of 44.

Therefore, the correct option is B. histogram with the title favorite sport and the x-axis labeled sport, and the y-axis labeled number of students, with the first bar labeled tennis going to a value of 17, the second bar labeled soccer going to a value of 12, the third bar labeled baseball going to a value of 27, and the fourth bar labeled basketball going to a value of 44

Learn more about histograms, here:

https://brainly.com/question/30354484

#SPJ1

you have to tell the question first

The total square inches of cardboard that option A will require is: 657 in²

The total square inches of cardboard that option B will require is: 844 in²

Option B is more cost effective

The total surface area of these three dimensional shapes are simply gotten by summing up the area of each individual face to get:

Option A:

Total surface area = 2(¹/₂(10 * 8.7)) + 3(19 * 10)

= 87 + 570

= 657 in²

Cost = 0.22 * 657 = $144.54

Option B:

Total surface area = 2(8 * 10) + 2(19 * 10) + 2(19 * 8)

= 160 + 380 + 304

= 844 in²

Cost = 0.18 * 844 = $151.92

Read more about total surface area at: https://brainly.com/question/16519513

#SPJ1

The conclusion we can draw graph is: Together, Streetcar and Cable Car are the preferred transportation for 168 residents.

In mathematics, a graph is a collection of points (called vertices or nodes) connected by lines (called edges). Graphs are used to represent many kinds of relationships, such as social networks, road networks, electrical circuits, and chemical structures.

We can draw the following conclusions from the circle graph:

Together, Streetcar and Cable Car are the preferred transportation for 27% + 15% = 42% of the residents. To find the number of residents in this group, we can multiply 42% by the total sample size of 400:

0.42 x 400 = 168 residents.

Therefore, the conclusion we can draw is: Together, Streetcar and Cable Car are the preferred transportation for 168 residents.

We cannot conclude that Walk and Streetcar are the preferred transportation for 55 residents, as there is no overlap between the sections representing these modes of transportation on the circle graph.

We cannot conclude that Bus is the preferred transportation for 45 residents, as the Bus section represents only 10% of the total sample size, which corresponds to 0.10 x 400 = 40 residents.

We cannot conclude that Bicycle is the preferred transportation for 50 residents, as the Bicycle section represents only 8% of the total sample size, which corresponds to 0.08 x 400 = 32 residents.

To know more about graph visit:

https://brainly.com/question/19040584

#SPJ1

The statement "Some twins are sisters. All twins are siblings. Therefore, some siblings are sisters" is true.

Usually an illustration of a substantial deductive contention in which the conclusion takes coherently from the premises.

The primary introduction states that a few twins are sisters, which suggests that they are female twins. The moment preface states that all twins are kin, which implies that they are related by blood.

In this manner, on the off chance that a few twins are sisters and all twins are kin, it consistently takes after that a few kin are sisters.

It is imperative to note that the conclusion isn't essentially genuine for all kin, as a few kin may be brothers or mixed-gender twins. Be that as it may, the contention is still consistently substantial since the conclusion takes after coherently from the premises 

To know more about twins refer to this :

https://brainly.com/question/986349

#SPJ4

The missing angles of the diagram are:

∠1 = 118°

∠2 = 62°

∠3 = 118°

∠4 = 30°

∠5 = 32°

∠6 = 118°

∠7 = 30°

∠8 = 118°

Supplementary angles are defined as two angles that sum up to 180 degrees. Thus:

∠1 + 62° = 180°

∠1 = 180 - 62

∠1 = 118°

Now, opposite angles are congruent and ∠2 is an opposite angle to 62°. Thus: ∠2 = 62°.

Similarly: ∠3 = 118° because it is congruent to ∠1

Alternate angles are congruent and ∠5 is an alternate angle to 32°. Thus:

∠5 = 32°

Sum of angle 4 and 5 is a corresponding angle to ∠2 . Thus:

∠4 + ∠5 = 62

∠4 + 32 = 62

∠4 = 30°

This is an alternate angle to ∠7 and as such ∠7 = 30°

Sum of angles on a straight line is 180 degrees and as such:

∠8 = 180 - (30 + 32)

∠8 = 118° = ∠6 because they are alternate angles

Read more about Missing Angles at: https://brainly.com/question/28293784

#SPJ1

The size of the square to cut is 5/3 inches and the maximum volume of the box is 266.67 cubic inches.

To find the size of the square to cut and the maximum volume, we can follow these steps:

Let's call the length of each side of the square to be cut x inches. So the dimensions of the base of the box would be (16-2x) inches by (10-2x) inches.

The height of the box would be x inches since we are folding up the sides.

The volume of the box can be found by multiplying the length, width, and height: V = (16-2x)(10-2x)x.

To find the maximum volume, we can take the derivative of V with respect to x and set it equal to zero, since the maximum volume occurs at a critical point.

After taking the derivative and simplifying it, we get the equation 24x^2 - 520x + 1600 = 0.

Solving this quadratic equation, we get x = 5/3 or x = 20/3. Since x must be less than 5 (the length of the shorter side), the only feasible solution is x = 5/3 inches.

Plugging this value of x back into the equation for the volume, we get V = (16-2(5/3))(10-2(5/3))(5/3) = 266.67 cubic inches.

Learn more about the maximum volume at

https://brainly.com/question/20866652

#SPJ4

The two tangent theorem can be used to find the required equations and  the lengths of the of the segments and tangents as follows;

4. 6x - 16 = 4x - 10

5. x = 13

6. 10y - 3 = 7y + 21

7. y = 8

8. GK = 139
9. GZ = 77

10. ZL = 62

The two tangent theorem states that intersecting tangent segments from the point of the intersection to the circle are congruent.

The two tangent theorem indicates;

PZ = GZ, and ZK = ZL

Therefore;

4. An equation that can be used to solve for x can be obtained from the equation formed using the two tangent theorem and plugging in the value of ZK and ZL in the equation; ZK = ZL

The equation is therefore; 6·x - 16 = 4·x + 10

5. 6·x - 16 = 4·x + 10

6·x - 4·x = 10 + 16 = 26

2·x = 26

x = 13

6. The equation that can be used to solve for y can be obtained from the equation PZ = GZ, by plugging in the values of PZ and GZ in the equation as follows;

10·y - 3 = 7·y + 21

7. 10·y - 3 = 7·y + 21

10·y - 7·y = 21 + 3 = 24

3·y = 24

y = 24/3 = 8

y = 8

8. GK = GZ + ZK

Therefore; GK = 7·y + 21 + 6·x - 16

GK = 7 × 8 + 21 + 6 × 13 - 16 = 139

GK = 139

9. GZ = 7·y + 21 = 7 × 8 + 21 = 77

GZ = 77

10. ZL = 4·x + 10

Therefore; ZL = 4 × 13 + 10 = 62

ZL = 62

Learn more on circle theorems here: https://brainly.com/question/28699728

#SPJ1

Answer:

4834000000

That is your answer.

The side length x of the triangle to the nearest tenth is 170.3

The figures in the image are right-triangle.

From the diagram:

Angle θ = 20°

Opposite to angle θ = 62

Adjacent to angle θ = x

To find the value of x, we use the trigonometric ratio.

Note that: tangent = opposite / adjacent

Plug in the values

tan( 20 ) = 62 / x

Solve for x

x = 62 / tan( 20 )

x = 170.3

Therefore, the measure of side length labelled x is 170.3 units.

Learn more about trigonometric ratio here: brainly.com/question/28016662

#SPJ1

To make 2 batches of cement, Jude will need 6 quarts of water and 8 packages of pre-mixed mortar.

To make 5 batches of cement, Jude will need 15 quarts of water and 20 packages of pre-mixed mortar.

Ratio and fractions are the main bases on which proportion is explained. Two ratios are equal when they are expressed as a fraction in the form of a/b, ratio a:b, and then a proportion. In this case, a and b can be any two integers. The ratio and proportion are important building blocks for understanding the numerous ideas in science and mathematics.

To make 2 batches of cement, Jude will need 6 quarts of water and 8 packages of pre-mixed mortar.

To make 5 batches of cement, Jude will need 15 quarts of water and 20 packages of pre-mixed mortar.

Learn more about proportion on:

https://brainly.com/question/870035

#SPJ1

Solving the right triangle, the measures are:

Ange A = 50°; side a ≈ 31.0; side c ≈ 40.4

A right triangle is a type of triangle that has one of its angles measuring 90 degrees (a right angle). The side opposite the right angle is called the hypotenuse, while the other two sides are called the legs.

To solve the right triangle, apply the Trigonometry ratios like the SOHCAHTOA.

Angle A = 180 - 90 - 40

Ange A = 50°

To find side a, apply the tangent ratio (TOA):

tan ∅ = opp./adj.

tan 40 = 26/a

a = 26/tan 40

a ≈ 31.0

To find c, apply the sine ratio (SOH):

sin 40 = 26/c

c = 26/sin 40

c ≈ 40.4

Learn more about the right triangle on:

https://brainly.com/question/1248322

#SPJ1

The conditions will the linear equations have no solutions, one solution, infinitely many solutions are specified by variables and their coefficient matrix and states if the system is consistent or inconsistent.

Let us assume simple equations:

ax + by = c

ex + fy = g

Here a, b, c, e, f, and g are constants.

The different conditions are determined as:

1. No solutions: It is represented by D, If the determinant of the coefficient matrix is zero and the procedure is inconsistent, then we can assume that the system has no solutions.

2. One solution: If the coefficient matrix of any system is non-zero, then the system has one solution.

3. Infinitely many solutions: If the system is Consistent and the determinant of the coefficient matrix is zero, then the system has  Infinitely many solutions.

To learn more about Linear Equations,

https://brainly.com/question/14473457

#SPJ4

Answer: This situation involves choosing a group of 5 players out of a total of 12 players, where the order in which the players are chosen does not matter. Therefore, this is an example of a combination problem.

The number of ways to choose a group of 5 players out of 12 is given by the formula for combinations:

n C r = n! / (r! * (n-r)!)

where n is the total number of players, r is the number of players being chosen, and "!" represents the factorial operation.

In this case, we have n = 12 and r = 5, so the number of different choices of starters is:

12 C 5 = 12! / (5! * (12-5)!)

= 792

Therefore, there are 792 different choices of starters that the coach can make from the team of 12 players.

Step-by-step explanation: