consider a complete combustion process during which the reactants enter a combustion chamber at 20 c and leave at 700c. combustion is achieved with a) 100% theoretical air, b) 200% theoretical air and c) the chemically correct amount of pure oxygen.

Answers

Answer 1

A) 100% Theoretical Air: In this case, the combustion process would involve the reactants burning with atmospheric air, which is composed of 79% nitrogen and 21% oxygen.

What is atmospheric air?

Atmospheric air is the air that surrounds the Earth and makes up the Earth's atmosphere. It consists of a mixture of gases, primarily nitrogen (78.09%), oxygen (20.95%), argon (0.93%), carbon dioxide (0.04%) and other trace gases. This mixture of gases is essential for life to exist on Earth as it provides the oxygen required by organisms for respiration.

This would mean that 79% of the air is not participating in the combustion reaction, so the combustion process would be incomplete and the temperature of the exhaust gases would be lower than 700 °C.
B) 200% Theoretical Air: In this case, the combustion process would involve the reactants burning with twice the amount of atmospheric air, which is composed of 79% nitrogen and 21% oxygen. This would mean that 42% of the air (twice the amount of oxygen) is participating in the combustion reaction, so the combustion process would be more complete and the temperature of the exhaust gases would be higher than 700 °C.
C) The Chemically Correct Amount of Pure Oxygen: In this case, the combustion process would involve the reactants burning with the chemically correct amount of pure oxygen, which is composed of 100% oxygen. This would mean that 100% of the air is participating in the combustion reaction, so the combustion process would be complete and the temperature of the exhaust gases would be close to 700 °C.

To learn more about atmospheric air
https://brainly.com/question/19259863
#SPJ1


Related Questions

calculate the mass of solid agcl that is produced when 525ml of .35 m alcl3 is used with excess ag2so4 solution

Answers

The mass of solid AgCl produced when 525 mL of 0.35 M AlCl3 is used with excess Ag2SO4 solution is 78.97 g.

The balanced chemical equation for the reaction between AlCl3 and Ag2SO4 is:

2 AlCl3 + 3 Ag2SO4 → Al2(SO4)3 + 6 AgCl

From the equation, we can see that 2 moles of AlCl3 react with 3 moles of Ag2SO4 to produce 6 moles of AgCl. Therefore, the mole ratio of AlCl3 to AgCl is 2:6 or 1:3.

To calculate the moles of AgCl produced, we need to first calculate the moles of AlCl3 used.

Moles of AlCl3 = concentration x volume / 1000

Moles of AlCl3 = 0.35 mol/L x 0.525 L

Moles of AlCl3 = 0.18375 mol

Since the mole ratio of AlCl3 to AgCl is 1:3, the moles of AgCl produced is:

Moles of AgCl = 3 x Moles of AlCl3

Moles of AgCl = 3 x 0.18375 mol

Moles of AgCl = 0.55125 mol

The molar mass of AgCl is 143.32 g/mol. Therefore, the mass of AgCl produced is:

Mass of AgCl = moles of AgCl x molar mass of AgCl

Mass of AgCl = 0.55125 mol x 143.32 g/mol

Mass of AgCl = 78.97 g

Therefore, the mass of solid AgCl produced when 525 mL of 0.35 M AlCl3 is used with excess Ag2SO4 solution is 78.97 g.

Learn more about the mass

https://brainly.com/question/19694949

#SPJ4

how would a tendency toward stereotyping and countertransference affect the nurse's ability to complete a client's cultural assessment?
1. Facilitate the care planning process
2. Promote decisions based on the nurses value system
3. Utilize an open honest approach while responding to the client's concerns
4. Develop an unbiased approach to care.

Answers

It  is essential for nurses to be aware of their own biases and prejudices to provide culturally competent care.

If a nurse has a tendency toward stereotyping and countertransference, it can negatively impact their ability to complete a client's cultural assessment in several ways, including:

1. Facilitate the care planning process: Stereotyping and countertransference can prevent the nurse from understanding the client's cultural background, beliefs, and practices. Without this information, the nurse may not be able to develop a comprehensive care plan that meets the client's unique needs.

2. Promote decisions based on the nurse's value system: Stereotyping and countertransference can lead the nurse to make assumptions about the client's values and beliefs based on their own cultural background. This can result in decisions that are not in line with the client's preferences or needs.

3. Utilize an open honest approach while responding to the client's concerns: Stereotyping and countertransference can prevent the nurse from fully listening to and understanding the client's concerns. This can lead to a breakdown in communication and a lack of trust between the nurse and client.

4. Develop an unbiased approach to care: Stereotyping and countertransference can prevent the nurse from developing an unbiased approach to care. This can result in the provision of care that is not culturally sensitive, respectful, or appropriate for the client.

Therefore, it is essential for nurses to be aware of their own biases and prejudices to provide culturally competent care. Nurses must work to identify and address any stereotypes or countertransference that may impact their ability to provide patient-centered care. By doing so, the nurse can develop a more effective approach to care that is respectful, unbiased, and meets the unique needs of each client.

Visit to know more about Competent care:-

brainly.com/question/30624486

#SPJ11

what does a new chromatogram look like after increasing polarity of mobile phase to remove a contaminant peak

Answers

The resulting chromatogram would show a shift in the retention times of the analytes. The peak corresponding to the contaminant may also appear smaller or absent altogether in the new chromatogram. The overall shape and resolution of the chromatogram may be slightly altered due to changes in the mobile phase composition.

The chromatography is the technique of separation of the components from a mixture. The chromatograph is referred to a visible record of the result of the chromatography.The mobile phase is referred to the gas or the liquid which flows with a different rate on the stationary phase.  The mobile phase carries the components of the mixture. It is important for the separation of the components present in the mixture.When increasing the polarity of the mobile phase to remove a contaminant peak, the resulting chromatogram would show a shift in the retention times of the analytes. The contaminant peak would ideally be eluted earlier in the chromatogram, allowing for better separation from the target analytes. The peak corresponding to the contaminant may also appear smaller or absent altogether in the new chromatogram. The overall shape and resolution of the chromatogram may be slightly altered due to changes in the mobile phase composition.

Learn more about mobile phase here:

https://brainly.com/question/30616326

#SPJ11

During chemistry class, Carl performed several lab test on two white solids. The results of three tests are seen in the data table. Based on this data, Carl has concluded that substance B must have ______ bonds.

Answers

Carl has concluded that substance have ionic bonds.

How can you tell whether or not a covalent bond is polar?

The usual guideline is that a bond is considered nonpolar if the difference in electronegativities is less than or equal to 0.4, while there are no hard and fast rules, and polar if the difference is greater.

What sort of covalent bond has a non-polar example?

The bond between two hydrogen atoms is an illustration of a nonpolar covalent bond since they equally share electrons. The bond between two chlorine atoms is another illustration of a nonpolar covalent bond since they also equally share electrons.

To know more about ionic bonds visit:-

https://brainly.com/question/11527546

#SPJ1

Question:

During che distry class, Cort performed several lab tests on two white solids. The results of three tests are seen in the data table. Based on this data, Carl has concluded that substance have ________ bonds.

A) covalent

B) diatomic

C) ionic

D) metallic

at a certain temperature the solubility of lead(ii) iodide is 0.064 g/100 ml. what is the solubility product of lead(ii) iodide at this temperature? provide your answer rounded to 2 significant figures.

Answers

The solubility product (Ksp) of a substance is a measure of the maximum solubility of that substance in a given solution. It is calculated as the product of the molar concentrations of the ions present in the solution.

In the case of lead(II) iodide, the Ksp can be calculated as the product of the molar concentrations of Pb2+ and I− ions present in the solution.

At the given temperature, the solubility of lead(II) iodide is 0.064 /100 ml. Therefore, the molar concentrations of Pb2+ and I− ions in the solution would be 0.064/100 ml divided by the molar mass of lead(II) iodide (364/mol). This gives a Ksp of 4.07 x 10-9, which can be rounded to 4.1 x 10-9. This is the solubility product of lead(II) iodide at the given temperature.

In summary, the solubility product of lead(II) iodide at a certain temperature is 4.1 x 10-9 when rounded to two significant figures.

Know more about Molar concentrations here

https://brainly.com/question/15532279#

#SPJ11

the interstitium around capillaries generally have a higher po2 than pco2. true or false

Answers

False. The interstitium around capillaries generally has a lower PO2 and higher PCO2 due to the exchange of gases between the blood in the capillaries and the surrounding tissue. Oxygen diffuses from the capillaries into the tissue, leading to a decrease in PO2, while carbon dioxide diffuses from the tissue into the capillaries, leading to an increase in PCO2.

When blood flows through capillaries, oxygen diffuses from the capillary into the interstitium, while carbon dioxide diffuses from the interstitium into the capillary. This exchange of gases is driven by differences in their partial pressures in the blood and interstitium. The partial pressure of oxygen is higher in the capillary than in the interstitium, while the partial pressure of carbon dioxide is higher in the interstitium than in the capillary. This difference in partial pressures creates a concentration gradient that drives the diffusion of gases.

Therefore, the interstitium around capillaries generally has a lower PO2 and a higher PCO2 than the capillary blood. However, the exact partial pressures of these gases in the interstitium can vary depending on factors such as tissue metabolism, blood flow, and respiratory function.

Learn more about capillaries here:

https://brainly.com/question/29651472

#SPJ11

The statement "the interstitium around capillaries generally have a higher  [tex]P_{O2}[/tex] than  [tex]P_{CO2}[/tex]" is true.

Why is the [tex]P_{O2}[/tex] higher around the interstitium?

In the interstitium around capillaries, [tex]P_{O2}[/tex] (partial pressure of oxygen) is generally higher than  [tex]P_{CO2}[/tex] (partial pressure of carbon dioxide) because oxygen is continuously diffusing from the capillaries into the interstitial fluid to be taken up by cells, while carbon dioxide is diffusing from cells into the interstitial fluid and then into the capillaries to be transported away for removal from the body. This exchange of gases maintains the higher  [tex]P_{O2}[/tex] and lower [tex]P_{CO2}[/tex] in the interstitial fluid surrounding the capillaries. Therefore, the oxygen-rich blood in the capillaries increases the  [tex]P_{O2}[/tex]in the interstitium, while the carbon dioxide produced by cells decreases the  [tex]P_{CO2}[/tex] in the interstitium.

To know more about Partial Pressures:

https://brainly.com/question/2828367

#SPJ11

The water that was once clear is now sometimes cloudy and has an unpleasant odor. What is the most likely cause of the pollution in the river?

Answers

Answer:

The cause of the pollution in the river was some people add unhealthy drinks on the river.

has initial concentrations of 1.27 m zn2 , 0.335 m zn2 , and a potential of 0.01826 v at these conditions. after 6.4 hours, the new potential of the cell is found to be 0.009535 v. what is the concentration of zn2 at the cathode at this new potential?

Answers

The concentration of [tex]Zn_{2}[/tex]+ at the cathode at the new potential is 0.297 M.

To solve this problem, we can use the Nernst equation, which relates the concentration and potential of the ions in the cell:

E = E° - (RT/nF) * ln(Q)

Where:
- E is the new potential of the cell
- E° is the standard potential of the cell (given as 0.01826 V)
- R is the gas constant (8.314 J/K*mol)
- T is the temperature in Kelvin (assumed to be constant)
- n is the number of electrons transferred in the reaction (assumed to be 2 for Zn2+)
- F is Faraday's constant (96485 C/mol)
- Q is the reaction quotient, which is equal to [[tex]Zn_{2}[/tex]+] at the cathode divided by [Zn2+] at the anode.

We can rearrange the equation to solve for [[tex]Zn_{2}[/tex]+] at the cathode:

[[tex]Zn_{2}[/tex]+] cathode = [[tex]Zn_{2}[/tex]+] anode * e^(nF(E° - E)/RT)

Plugging in the given values, we get:

[[tex]Zn_{2}[/tex]+] cathode = 1.27 * e^(2*96485*(0.01826-0.009535)/(8.314*298*0.0259))

Solving this equation gives us [[tex]Zn_{2}[/tex]+] cathode = 0.297 M.

Therefore, the concentration of [tex]Zn_{2}[/tex]+ at the cathode at the new potential is 0.297 M.

Know more about  Nernst equation   here:

https://brainly.com/question/15237843

#SPJ11

which means of actuation for a co2 system is triggered by a product-of-combustion detector in the co2 system?

Answers

The actuation method triggered by a product-of-combustion detector in a CO2 system is typically referred to as "automatic actuation."

In this method, the product-of-combustion detector senses the presence of a fire or heat source and sends a signal to the CO2 system, causing it to automatically release CO2 to extinguish the fire.

This actuation method is commonly used in areas where fires may start unexpectedly, such as in server rooms, electrical substations, and other critical infrastructure facilities. It provides a fast and effective response to fires, helping to minimize damage and protect personnel.

Learn more about here:

https://brainly.com/question/31123826

#SPJ11

the hydration of ion: what interactions are at work in an aqueous salt solution to promote hydration?

Answers

The most important interaction is between the ions and the water molecules. There are also electrostatic interactions between the ions and the water molecules in aqueous salt solution.

In an aqueous salt solution, there are several interactions at work to promote hydration of ions. The most important interaction is between the ions and the water molecules. When the salt is dissolved in water, the water molecules surround the ions, forming hydration shells. These shells help to stabilize the ions and prevent them from coming into contact with each other.

The strength of the hydration interaction between an ion and a water molecule depends on the charge and size of the ion. Small ions with high charges, such as Na+ and Mg2+, have a strong interaction with water molecules because they can form more intimate contacts with water molecules. On the other hand, large ions with low charges, such as Cl- and SO42-, have weaker hydration interactions because they cannot form as many intimate contacts with water molecules.

In addition to the hydration interaction, there are also electrostatic interactions between the ions and the water molecules. These interactions occur because the ions have charges, which can interact with the partial charges on the water molecules. The strength of the electrostatic interaction depends on the charge of the ion and the distance between the ion and the water molecule.

Overall, the hydration of ions in an aqueous salt solution is a complex process that involves both hydration and electrostatic interactions. These interactions are crucial for stabilizing the ions in solution and preventing them from coming into contact with each other.

Learn more about aqueous salt solution here:

https://brainly.com/question/9947161

#SPJ11

The hydration of ions in an aqueous salt solution is promoted through ion-dipole interactions, hydrogen bonding, and electrostatic forces. These interactions help to stabilize the hydrated ions in the solution.

What interactions promote hydration of a solution?

The hydration of ions in an aqueous salt solution involves several interactions to promote hydration. These interactions include:

1. Ion-dipole interactions: These are the attractive forces between the charged ions (cations and anions) of the dissolved salt and the polar water molecules. The positive end (hydrogen atoms) of water molecules surround the negative ions, while the negative end (oxygen atom) of water molecules surround the positive ions.

2. Hydrogen bonding: This is a specific type of dipole-dipole interaction that occurs between the hydrogen atom of a polar molecule (such as water) and an electronegative atom (like oxygen). In an aqueous salt solution, hydrogen bonding can occur between water molecules surrounding the ions.

3. Electrostatic forces: These forces occur between charged particles and help to stabilize the hydration shell around the dissolved ions.

To know more about Intermolecular Forces:

https://brainly.com/question/30897286

#SPJ11

when 107 people in the united states died in 1937 from taking elixir sulfanilamide containing diethylene glycol that causes kidney poisoning, why was the federal government unable to intervene on the grounds that the mixture was toxic?

Answers

The federal government was unable to intervene in elixir sulfanilamide containing diethylene glycol that causes kidney poisoning as there was no legal requirement that medicine be safe.

In 1937, a sulfonamide antibiotic called elixir sulfanilamide, which was incorrectly made, poisoned large numbers of people in the United States. Over a hundred individuals are said to have died as a result. The 1938 Federal Food, Drug, and Cosmetic Act was passed in response to the uproar produced by this episode and subsequent tragedies of a similar nature, greatly expanding the authority of the Food and Drug Administration to regulate pharmaceuticals.

A warning that Elixir Sulfanilamide was poisonous and lethal was promptly published in newspapers and broadcast on radio once the AMA laboratory identified diethylene glycol as the dangerous component. On the 14th, a doctor in New York was informed of the fatalities and immediately contacted Food and Drug Administration headquarters.

Learn more about Elixir sulfanilamide:

https://brainly.com/question/30902703

#SPJ4

Question 5
Which of the following plants is known for its ability to absorb nitrates in polluted
water?
O cat tails
Oferns
O water lilies
O kelp

Answers

The sweet fiber in cat tail roots provides an abundance of starchy carbohydrates. The common cattail is not a perfect flower. Among the given options, cat tails  absorb nitrates from polluted water. The correct option is A.

The cattail flower spikes can be possible to boil and can be eaten just like the corn on the cob. Pollen from the matured flowers can be collected and can be used with other flour to make biscuits, muffins and pancakes.

Cattails have an amazing ability to absorb phosphorous, nitrogen and other elements which can destruct the water bodies and sediment beds. They play a vital function in treating wastewater.

Thus the correct option is A.

To know more about Cattails, visit;

https://brainly.com/question/30561903

#SPJ1

Scenario - Read the experimental design scenario and complete the IVCDV.
Adam wanted to see if he would get better at an exercise if he repeated the exercise over time. To test
this, he got a clothes pin and opened it and closed it as many times as he could in 60 seconds using only
his thumb and forefinger. He rested for one minute. Then, he did the same thing again. He opened and
closed the clothes pin as many times as he could for 1 minute. He kept doing this until he completed 10
trials with 1 minute rest time in between each trial. If the number of times he opened and closed the
close pin increased, then he got better at the exercise during this 20 minute experiment. If the number of
times he opened and closed the close pin decreased, then he did not get better at the exercise during this
20 minute experiment.

Answers

The repetition of the exercise over time is the IV (independent variable) in this example of an experimental design.

What is exercise?

Exercise is physical activity that is done to maintain or improve one's physical health and fitness. It usually entails exercises like jogging, running, cycling, swimming, weightlifting, or taking part in sports.

Adam is experimenting with the IV to see whether it has an impact on the DV (dependent variable), which is the number of times he can open and shut the clothes pin using only his thumb and forefinger in 60 seconds, by doing the exercise several times. Adam is checking the DV to determine whether there has been a change as a result of the IV.

Adam has regulated various factors to guarantee that the outcomes are trustworthy. For each experiment, he is, for instance, using the same clothes pin, opening and closing it with the same fingers, and timing each trial for exactly 60 seconds. In order to prevent weariness from impairing his performance, Adam is also taking a one-minute break between each session.

The idea is that if Adam performs the exercise repeatedly over time, he will get more adept at it. This theory is predicated on the idea that repetition and practice can enhance a person's capacity to carry out a physical job.

Adam will compare how many times he opened and closed the clothes pin in each trial, starting with the first, to determine the outcomes. The increase in the number indicates that Adam becomes more adept at the practice. If the number falls or stays the same, the hypothesis is refuted, then it may be said that repetition had no positive effect on performance.

Overall, this scenario for an experimental design provides a straightforward yet efficient approach to evaluate the claim that doing a physical activity repeatedly will increase performance. It highlights the significance of limiting variables and calculating the DV to get relevant results.

To know more about exercise, visit:

https://brainly.com/question/13128077

#SPJ1

An allosteric enzyme can exist in two states, _____ and _____.
tense; responsive
tense; relaxed
turgid; relaxed
tight; responsive
tight; relaxed

Answers

An allosteric enzyme can exist in two states, "tense" and "relaxed".

An allosteric enzyme is a type of enzyme that has multiple binding sites, including an active site where a substrate molecule binds and a regulatory site where a regulatory molecule (also called an effector) can bind. When a regulatory molecule binds to the regulatory site, it can cause a conformational change in the enzyme, which can affect the enzyme's activity.

Allosteric enzymes can exist in two main conformations or states: tense (T) and relaxed

Visit to know more about Enzyme:-

brainly.com/question/14577353

#SPJ11

what would happen to the d13c value of atmospheric co2 if a large proportion of co2 from fossil fuels was added to the atmosphere?

Answers

If a large proportion of CO2 from fossil fuels was added to the atmosphere, the d13C value of atmospheric CO2 would decrease.

This is because fossil fuels have a lower d13C value than the natural carbon reservoirs that make up the bulk of atmospheric CO2. As more and more fossil fuels are burned, the proportion of CO2 in the atmosphere with a lower d13C value increases, which in turn lowers the overall d13C value of atmospheric CO2. This change in the d13C value is a key marker for the increasing influence of human activities on the carbon cycle.

To learn more about CO2, refer:-

https://brainly.com/question/23026255

#SPJ11

If a large proportion of CO2 from fossil fuels was added to the atmosphere, the d13C value of atmospheric CO2 would decrease.

Explanation:

d13C is a measure of the ratio of stable isotopes 13C and 12C in a sample, such as atmospheric CO2, compared to standard reference material. Fossil fuels, such as coal, oil, and natural gas, are formed from ancient organic materials that are isotopically lighter, meaning they have a lower d13C value.
When we burn fossil fuels, CO2 is released into the atmosphere, increasing the overall CO2 concentration. As more CO2 from fossil fuels, with their lower d13C values, is added to the atmosphere, the overall d13C value of atmospheric CO2 would decrease.
This decrease in d13C value is used by scientists as an indicator of the anthropogenic contribution to atmospheric CO2 levels.

To know more about radioactive fossil fuels:

https://brainly.com/question/13958846

#SPJ11

an a Use the You need to make ar solid barium sulfide should you add?

Answers

To make solid barium sulfide, you would need to react barium metal with elemental sulfur. The balanced chemical equation for this reaction is:

Ba(s) + S(s) → BaS(s)

To carry out this reaction, you would need to add excess sulfur to the barium metal. This ensures that all the barium is consumed in the reaction, and no excess barium remains. The excess sulfur can be removed by washing the product with a suitable solvent.

It is important to note that the reaction between barium and sulfur can be exothermic, releasing heat and potentially causing a fire or explosion. Therefore, appropriate safety precautions, such as wearing gloves and eye protection and working in a well-ventilated area, should be taken when carrying out this reaction.

Learn more about barium sulfide,

https://brainly.com/question/18402799

#SPJ4

To make a solid barium sulfide (BaS) you would need to add sulfur (S) to barium (Ba) in a stoichiometric ratio of 1:1. This means that for every one mole of barium, you would need one mole of sulfur.

The reaction can be represented by the following chemical equation:

Ba + S → BaS

To carry out this reaction, you could start with a sample of metallic barium and add elemental sulfur powder to it, in a ratio of 1:1 by mole. The reaction between the two elements will produce solid barium sulfide.

It is important to note that this reaction can be highly exothermic, so appropriate safety precautions should be taken. Additionally, barium sulfide is a toxic and reactive compound, and should be handled with care.

For more question on barium sulfide click on

https://brainly.com/question/31013085

#SPJ11

Electrochemistry-Related Question:




The answer is "A"

but I don't understand this question, I need explanation

Answers

The only incorrect statement in the diagram is (d) Cr202-7 can be used in aqueous H2SO4.

A detailed explanation of the Standard Electrode Potential

Option (d) is incorrect because the half-cell reaction involving Cr2O7^2- and H+ (aq) produces H2CrO4, which can decompose in acidic solutions, leading to inaccurate results. Therefore, Cr2O7^2- should not be used in aqueous H2SO4 for the quantitative estimation of Fe(NO3)2-.

Learn more about Electrode Potential here:

https://brainly.com/question/17362810

#SPJ1

The Only incorrect statement is option C

What is electrochemistry?

Electrochemistry is a branch of chemistry that deals with the study of the relationship between electrical energy and chemical reactions.

It involves the study of the behavior of electrons and ions in chemical reactions that occur in a solution or at the interface between two different phases, such as a solid electrode and a liquid electrolyte.

We can see that it is better to use HCl instead of the use of the H2SO4 acid as we have in the options.

Learn more about electrochemistry:https://brainly.com/question/16912983

#SPJ1

Escriba ecuaciones iónicas netas balanceadas para las reacciones qué ocurren en cada uno de los casos siguientes. Identifique el o los iones espectadores de cada reacción. (a) Cr2(SO4)3(ac) + (NH4)2CO3(ac)=
(b) AgNO3(ac) + K2SO4(ac) =
(c) Pb(NO3)2(ac)+KOH(ac)=

Answers

(a) Balanced net ionic equation: Cr³⁺(aq) + 3CO₃²⁻(aq) → Cr₂(CO₃)₃(s); spectator ions: 2NH₄⁺(aq) and 3SO₄²⁻(aq).

(b) Balanced net ionic equation: Ag+(aq) + SO₄²⁻(aq) → Ag₂SO₄(s); spectator ions: K⁺(aq) and NO₃⁻(aq).

(c) Balanced net ionic equation: Pb²⁺(aq) + 2OH⁻(aq) → Pb(OH)₂(s); spectator ions: 2K⁺(aq) and 2NO₃⁻(aq).

(a) To write the balanced net ionic equation for the reaction between Cr₂(SO₄)₃ and (NH₄)₂CO₃, we first need to write the complete ionic equation:

Cr₂(SO₄)₃(aq) + 3(NH₄)₂CO₃(aq) → 2Cr(NO₃)₃(aq) + 3(NH₄)2SO₄(aq) + 3CO₂(g)

Then, we eliminate the spectator ions (NH₄⁺ and SO₄²⁻) to get the net ionic equation:

Cr³⁺(aq) + 3CO₃²⁻(aq) → Cr₂(CO₃)₃(s)

(b) For the reaction between AgNO₃ and K₂SO₄, the complete ionic equation is:

AgNO₃(aq) + K₂SO₄(aq) → 2KNO₃(aq) + Ag₂SO₄(s)

Eliminating the spectator ions (K⁺ and NO₃⁻) gives the net ionic equation:

Ag⁺(aq) + SO₄²⁻(aq) → Ag₂SO₄(s)

(c) Finally, for the reaction between Pb(NO₃)₂ and KOH, the complete ionic equation is:

Pb(NO₃)₂(aq) + 2KOH(aq) → Pb(OH)₂(s) + 2KNO₃(aq)

Eliminating the spectator ions (K⁺ and NO₃⁻) gives the net ionic equation:

Pb²⁺(aq) + 2OH⁻(aq) → Pb(OH)₂(s)

To learn more about Balanced net ionic equations, here

https://brainly.com/question/15467502

#SPJ4

g a 25.0-ml sample of 0.10 m hcl is titrated with 0.10 m naoh. what is the ph of the solution after 12.7 ml of naoh have been added to the acid? please report with 1 decimal place.

Answers

A 25.0-ml sample of 0.10 M HCl is titrated with the 0.10 M NaOH. The pH of the solution after the 12.7 ml of NaOH have been added to the acid is 1.4.

The moles of the HCl = molarity × volume

The moles of the HCl = 0.10  × 0.025

The moles of the HCl = 0.0025 mol

The moles of the NaOH = molarity × volume

The moles of the NaOH = 0.10  × 0.0127

The moles of NaOH = 0.00127 mol

HCl  +  NaOH ----> NaCl  +  H₂O

0.0025 mol of the HCl  react with the 0.0025 mol

Remaining moles =  0.0025 - 0.00127

                             = 0.00123 mol

[H⁺] = 0.00123 / ( 0.025 + 0.0127)

       = 0.033 M

pH = - log [H⁺]

pH = 1.4

To learn more about pH here

https://brainly.com/question/9408394

#SPJ4

consider the titration of 50.0 ml of 0.10 m acetic acid (, ) with . drag and drop each amount of added (to the acetic acid) into the appropriate resulting ph. in other words, determine the ph of the final solution after each volume of has been added. will the resulting solution be acidic, basic, or neutral?

Answers

The resulting solution will be acidic at the start of the titration, slightly basic at the equivalence point, and increasingly basic beyond that point.

To answer this question, we need to use the concept of acid-base titration. In this case, we are titrating acetic acid, a weak acid, with a strong base, which is usually sodium hydroxide (NaOH). As we add the base to the acid,

the pH of the solution will increase and the resulting solution will become more basic. The pH at any point in the titration can be calculated using the Henderson-Hasselbalch equation.

When 0 mL of NaOH is added to the acetic acid, the pH of the solution will be around 2.87, which is acidic. As we add more NaOH, the pH will increase until we reach the equivalence point where all the acetic acid has been neutralized.

At this point, the pH will be around 8.36, which is slightly basic. If we continue to add NaOH beyond the equivalence point, the pH will increase rapidly and become more basic.

To learn more about : solution

https://brainly.com/question/25326161

#SPJ11

The rate of a certain reaction with unit of M/s increase by a factor of 4 when [A] doubled and increase by a factor of 27 when [B] triples. What is the unit of rate constant for this reaction?

Answers

The unit of rate constant for this reaction is 1 / (s M⁴).

The rate of the reaction can be expressed as:

rate = k[A]²[B]³

where k is the rate constant and x and y are the orders of reaction with respect to A and B, respectively.

We can use the given information to determine the values of x and y.

When [A] is doubled, the rate increases by a factor of 4. This means:

(rate when [A] is doubled) / (rate when [A] is not doubled) = 4

[(k[2A]^x[B]^y) / (k[A]^x[B]^y)] = 4

2^x = 4

x = 2

Similarly, when [B] is tripled, the rate increases by a factor of 27. This means:

(rate when [B] is tripled) / (rate when [B] is not tripled) = 27

[(k[A]^2[3B]^y) / (k[A]^2[B]^y)] = 27

3^y = 27

y = 3

Substituting the values of x and y in the rate equation,

rate = k[A]²[B]³

The unit of rate constant can be determined as follows:

unit of rate = M/s

unit of [A] = M

unit of [B] = M

unit of rate constant = unit of rate / (unit of [A]² unit of [B]³)

Substituting the units.

unit of rate constant = (M/s) / (M² M³) = 1 / (s M⁴)

To know more about reaction, here

brainly.com/question/17101840

#SPJ4

its un-ionized form is yellow and its conjugate base is blue. what color would a solution have at ph

Answers

To determine what color the solution would be at given pH, we need to know the pKa of indicator.

Based on the information given, it can be inferred that the substance in question is an acid that undergoes an ionization reaction. When an acid ionizes, it donates a proton (H+) to water, forming a conjugate base and hydronium ions (H3O+).

At a low pH, the solution would be acidic and the substance would be predominantly in its ionized form, which is likely blue in color due to the presence of the conjugate base. As the pH increases, the solution becomes less acidic and more basic, which favors the un-ionized form of the substance, which is yellow in color. Therefore, the color of the solution at a given pH would depend on the relative concentrations of the ionized and un-ionized forms of the substance, as well as the specific wavelengths of light that are absorbed and transmitted by each form.

Learn more about solution here:

https://brainly.com/question/9666154

#SPJ11

The pH of a solution with yellow color and blue colored conjugate base will have a pH of around 2-3.

Explanation:

Based on the given information, we can assume that the substance in question is an acid since an acid dissociates to give its conjugate base. When an acid is dissolved in water, it donates a proton (H+) to water molecules, creating hydronium ions (H3O+). This results in a decrease in pH and a shift towards the acidic end of the pH scale.
At low pH values, the solution would appear yellow due to the unionized form of the acid. As the pH increases, more of the acid will dissociate into its conjugate base form, which is blue. Therefore, the color of the solution would shift from yellow to blue as the pH increases.
To be more specific, we can use the pH colors of the solution as a guide. At a pH of around 2-3, the solution would be yellow. As the pH increases to around 4-5, the solution would be yellowish-orange. At a pH of 7, the solution would be green (neutral). As the pH increases further, the solution would shift towards blue-green and eventually to blue.

Therefore, if the acid in question has a yellow un-ionized form and a blue conjugate base, the solution would appear yellow at low pH values and shift towards blue as the pH increases.

To know more about pH:

https://brainly.com/question/15289741

#SPJ11

1. Create a diagram of your electroplating apparatus (an electrolytic cell). Then submit your drawing with the following terms labeled correctly. Or, beginning with the positive terminal of the battery and ending with the negative terminal of the battery, describe the path that the electricity takes and where each of the following occurs:
anode
cathode
copper strip
battery
positive terminal
negative terminal
place where oxidation occurs
place where reduction occurs
electrolyte solution
coin (or nail)
direction of electron flow

2. Write the two half-reactions that occur in this electroplating process. Be sure to include the states of the elements or ions.

Answers

The two half-reactions that occur in this electroplating process are oxidation and reduction. the diagram is attached

What is oxidation?

Oxidation is a chemical reaction in which an atom or molecule either loses or gains electrons. This process results in the oxidation of the atom or molecule, leading to a chemical change in the molecule. Oxidation occurs when electrons are removed from the molecule, causing it to become more positively charged. This can lead to the formation of new molecules, such as oxygen (O₂) and carbon dioxide (CO₂).

Oxidation occurs at the anode, where electrons are released from the copper strip and it is oxidized to form copper ions (Cu²⁺). The copper ions are then dissolved into the electrolyte solution. Reduction occurs at the cathode, where the copper ions in the electrolyte solution are reduced using electrons from the battery and deposited onto the coin (or nail). The direction of electron flow is from the positive terminal of the battery, to the anode, to the electrolyte solution, to the cathode, and finally to the negative terminal of the battery.

To learn more about oxidation
https://brainly.com/question/13182308
#SPJ1

by titration, it is found that 20.44 ml of 0.1323 m naoh (aq) is needed to neutralize 25.00 ml of h2so4 (aq). calculate the concentration of the h2so4 solution in m.

Answers

The concentration of the H₂SO₄ solution is approximately 0.0541 M.

To calculate the concentration of the H₂SO₄ solution, you can use the concept of equivalence in the neutralization reaction:

H₂SO₄ (aq) + 2 NaOH (aq) → Na₂SO₄ (aq) + 2 H₂O (l)

Using the given information, we can start by finding the moles of NaOH:

moles of NaOH = volume (L) × concentration (M) = 0.02044 L × 0.1323 M = 0.00270492 moles

Since the stoichiometry of the reaction is 1:2 (H₂SO₄:NaOH), the moles of H₂SO₄ can be calculated as follows:

moles of H₂SO₄ = 0.00270492 moles NaOH × (1 mole H₂SO₄ / 2 moles NaOH) = 0.00135246 moles

Finally, we can find the concentration of the H₂SO₄ solution:

concentration of H₂SO₄ (M) = moles of H₂SO₄ / volume (L) = 0.00135246 moles / 0.02500 L = 0.0540984 M

Therefore, the concentration of the H₂SO₄ solution is approximately 0.0541 M.

Visit here to learn more about stoichiometry  : https://brainly.com/question/30215297
#SPJ11

13.8 g of neon gas is placed in a container at 34 oc and 812 mm hg. what is the volume of the container (in l)?

Answers

The volume of the container is 16.9 L.To find the volume of the container, we can use the ideal gas law: PV = nRT

where P is the pressure in atmospheres (convert 812 mmHg to atm), V is the volume in liters (what we're solving for), n is the number of moles of gas (we're given 13.8 g of neon, which we can convert to moles using the atomic weight), R is the gas constant (0.0821 L·atm/mol·K), and T is the temperature in Kelvin (convert 34°C to K).

First, let's convert the pressure:

812 mmHg = 1.068 atm

Next, let's convert the temperature:

34°C = 307 K

Now, let's convert the mass of neon to moles:

13.8 g / 20.18 g/mol = 0.683 mol

Now we can plug in all the values and solve for V:

V = (nRT) / P
V = (0.683 mol x 0.0821 L·atm/mol·K x 307 K) / 1.068 atm
V = 16.9 L

Learn more about molar mass here: brainly.com/question/22997914

#SPJ11

A mixture consisting of 1 mol of H2O(g) and
1 mol CO(g) is placed in a 14 L reaction vessel
at 800 K. At equilibrium, 0.42 mol CO2(g) is
present as a result of the reaction
CO(g) + H2O(g) ⇀↽ CO2(g) + H2(g).
What is Kc at 800 K?

Answers

The equilibrium constant (Kc) for the given reaction at 800 K is 1.

What is Equilibrium?

Chemical equilibrium is described by the equilibrium constant, which is a numerical value that quantitatively expresses the ratio of concentrations (or partial pressures) of reactants and products at equilibrium. The equilibrium constant is denoted by the symbol K, and its value depends on the specific chemical reaction and the temperature at which the reaction occurs.

According to the given information, at equilibrium, the concentration of C[tex]O_{2}[/tex] is 0.42 mol in a 14 L reaction vessel. Therefore, the equilibrium concentration of C[tex]O_{2}[/tex] ([C[tex]O_{2}[/tex]]) is 0.42 mol / 14 L = 0.03 mol/L.

The concentrations of CO ([CO]) and [tex]H_{2}O[/tex]([[tex]H_{2}O[/tex]]) at equilibrium can be calculated using the initial moles and the change in moles for each species. Since 1 mol of CO reacts with 1 mol of [tex]H_{2}O[/tex] to produce 1 mol of C[tex]O_{2}[/tex], the change in moles for CO and H2O is also 0.42 mol.

Equilibrium concentration of CO ([CO]) = Initial moles of CO - Change in moles of CO = 1 mol - 0.42 mol = 0.58 mol

Equilibrium concentration of [tex]H_{2}O[/tex] ([tex]H_{2}O[/tex]]) = Initial moles of [tex]H_{2}O[/tex] - Change in moles of [tex]H_{2}O[/tex] = 1 mol - 0.42 mol = 0.58 mol

Now, we can substitute these equilibrium concentrations into the equilibrium expression for Kc:

Kc = [C[tex]O_{2}[/tex]] / ([CO] * [[tex]H_{2}O[/tex]])

Plugging in the values:

Kc = (0.42)(0.42) / (0.42 * 0.42)

Kc = 1

So, the equilibrium constant (Kc) for the given reaction at 800 K is 1.

Learn more about Equilibrium from the given link

brainly.com/question/18849238

#SPJ1

Help what's the answer?

Answers

Answer:

91

Explanation:

ok

write the chemical formula for the soluble product that forms when solid agcl reacts with nh3. chemical formula: after the soluble product forms, which reagent is used to confirm the presence of ag cations?

Answers

The chemical formula for the soluble product that will forms when solid AgCl reacts with the NH₃. The chemical formula: [Ag(NH₃)₂]Cl. The reagent is used to confirm the presence of Ag cations is nitric acid.

The chemical reaction is as :

AgCl  +   NH₃   --->   [Ag(NH₃)₂]Cl

The chemical formula for the product is  [Ag(NH₃)₂]Cl.

When the silver cation will reacts with the chlorine anion and in the presence of the soluble chlorides like as the hydrochloric acid, silver(I) chloride and it will forms as the white precipitate. The precipitate form is insoluble in the acids like the  nitric acid but it is dissolves in the aqueous ammonia, and it  forms the complex ion.

The reagent is used to confirm the presence of Ag cations is nitric acid that is HNO₃.

To learn more about cation here

https://brainly.com/question/30428512

#SPJ4

Read the given chemical reaction.


C2H6 + O2 → CO2 + H2O


How many moles of O2 are required to react completely with 3. 2 moles of C2H6?


3. 5 moles of O2

6. 5 moles of O2

10. 4 moles of O2

11. 2 moles of O2

Answers

11.2 moles of [tex]\rm O_2[/tex] are required to react completely with 3.2 moles of [tex]\rm C_2H_6[/tex]. Therefore option D is correct.

The balanced chemical equation for the complete combustion of [tex]\rm C_2H_6[/tex] (ethane) with oxygen (O2) is: 2 [tex]\rm C_2H_6 + 7 O_2\ - > 4 CO_2 + 6 H_2O[/tex]

From the balanced equation, we can see that 2 moles of [tex]\rm C_2H_6[/tex] react with 7 moles of [tex]\rm O_2[/tex]. To find out how many moles of [tex]\rm O_2[/tex] are required to react completely with 3.2 moles of [tex]\rm C_2H_6[/tex], we can set up a proportion:

(7 moles [tex]\rm O_2[/tex] / 2 moles [tex]\rm C_2H_6[/tex]) = (x moles [tex]\rm O_2[/tex] / 3.2 moles [tex]\rm C_2H_6[/tex])

Solving for x:

x = (7 moles [tex]\rm O_2[/tex] / 2 moles [tex]\rm C_2H_6[/tex]) * 3.2 moles [tex]\rm C_2H_6[/tex]

x = 11.2 moles [tex]\rm O_2[/tex]

So, 11.2 moles of [tex]\rm O_2[/tex] are required to react completely with 3.2 moles of [tex]\rm C_2H_6[/tex]. Therefore, the correct answer is 11.2 moles of [tex]\rm O_2[/tex].

Therefore option D is correct.

Know more about stoichiometry:

https://brainly.com/question/28780091

#SPJ12

a 88.06 g sample of calcium hydroxide is dissolved in enough water to make 1.520 liters of solution. calculate the volume in ml of this solution that must be diluted with water in order to make 2.100 l of 0.250 m calcium hydroxide. what is the coefficient of your answer in scientific notation?

Answers

First, let's calculate the number of moles of calcium hydroxide in the initial solution:

88.06 g Ca(OH)2 = 88.06/74.093 g/mol = 1.188 mol Ca(OH)2
To make 2.100 L of 0.250 M solution, we need:

2.100 L x 0.250 mol/L = 0.525 mol Ca(OH)2
Let's call the volume of the initial solution that we need to dilute "V":

V x (1.188 mol/1.520 L) = 0.525 mol/2.100 L
Solving for V, we get:

V = (0.525 mol/2.100 L) x (1.520 L/1.188 mol) = 0.336 L = 336 mL
The coefficient of this answer in scientific notation is 3.36 x 10^2.
Other Questions
Choose the correct statement(s) that accurately explain(s) impulse conduction to the myocardium. Check all that apply. Check All That Apply Firing of the SA node excites atrial cardiomyocytes and stimulates the two atria to contract almost simultaneously In the AV node, the signal slows down to about 0.05 m/sec because the cardiomyocytes have fewer op junctions over which the signal con be transmitted The entire ventricular myocardium depolarizes within 200 msec after the SA node fires, causing the ventricles to contact one after another Signals travel through the AV bundle and Purkinje fibers at a speed of 4 msec, the fastest in the conduction system The delay at the AV node is essential because it gives the atria time to fill with blood before they begin to contract (Cost of equity) The common stock for the Bestsold Corporation sells for $56. If a new issue is sold, the flotation costs are estimated to be 8 percent. The company pays 80 percent of its earnings in dividends, and a $7.20 dividend was recently paid. Earnings per share 6 years ago were $7.00. Earnings are expected to continue to grow at the same annual rate in the future as during the past 6 years. The firm's marginal tax rate is 32 percent. Calculate the cost of (a) internal common equity and (b) external common equity. a. What is the firm's cost of internal common equity?a. What is the firm's cost of internal commonequity?____% (Round to two decimal places.)b. What is the firm's cost of external commonequity?____% (Round to two decimal places.) he ________ specifier is a special set of characters that specify how a value should be formatted. midori is a manager of a business unit. she is responsible for and evaluated by profit and loss. which strategy does her company use for achieving organizational control? True or False? a desired outcome of a good reward system is to foster personal growth and development. Income tax is calculated based on:O A. gross income.O B. net income minus profits. C. net income minus deductions.D. gross income minus deductions. if an investor can, but does not have to, sell one currency for another at a specific rate at a specific future date, that investor has a(n) multiple choice uncovered international investment. currency option. currency swap. forward exchange contract. consider the following online auction system. there are n bidding agents; agent i has an integer bid bi > 0. all bids are distinct. the bidding agents appear in an order chosen uniformly at random. each agent proposes its bid bi in turn, and at all times the system maintains a variable bmax equal to the highest bid seen so far. ow many times do you expect to update bmax when this process is executed? This type of evacuation is used in case of tornados and other severe storms. a. Shelter-in-place evacuation b. Building evacuation c. Vertical evacuation d. Horizontal evacuation e. Local evacuation the practice of spreading ideas to help one's cause or to harm an opposing cause propagandatrue or false under what condition(s) is the compilation efficiency is preferred to the optimality of the object code produced? Lucas takes lessons to learn how to play merengue music on his guitar. He rides the bus toeach lesson and then walks home. He attends 8 lessons, and each lesson costs $13. Whichexpression represents the total cost for Lucas to attend the lessons, if each bus ride costx dollars?ABCD104 + 13x104 + 8x13 + 8x13 + x in this recursive function, what is the role of the helper function computesign? The first leg of Hannahs route is from her house (A) to the bakery (B). How much distance will she cover in this part of her run? Explain using coordinate subtraction Tiktaalik is a genus of fish that date back to 375 million years ago. They had wrist-like bone structures at the tips of their fins, a neck, and bony structures over their gills that may have allowed them to breathe air. What does this evidence suggest? A. Fish used to live on land. B. Amphibians evolved from fish. C. Lungs and gills evolved at the same time. D. Fish and land animals used to look the same. An object has temperature of 2310 C. Calculate the wavelength this object emits the most. Give the answer in micrometers with twosignificant figures. Which criminal justice professional is responsible for supervising inmates while they were saving time in prison Malcolm Manufacturing, Inc. just paid a $2.00 annual dividend (that is, D0 = 2.00). There will be nodividend payment for the next two years (i.e., at t = 1 and t = 2). In year three (t = 3), the dividend isexpected to be $5.00. The dividend will then grow at 10% annually for the next 3 years (i.e., at t = 4, t= 5 and t = 6) and thereafter (i.e., beginning at t = 7) dividends will grow at a rate of 3% annuallyforever. Assuming a required return of 14%, what is the current price of the stock? lowe's maintains extra inventory of roofing nails in case the weekly delivery from its regional distribution center is delayed. this type of inventory is called . Which word is misspelled here ?Round Provinciala performance FaienceRobe