Consider a triangle ABC like the one below. Suppose that C=83°, a = 43, and b = 44. Solve the triangle.
Carry your intermediate computations to at least four decimal places, and round your answers to the nearest tenth.
If there is more than one solution, use the button labeled "or".

Answer:

1. The coefficients are: 1, 3, 2

2. From the balanced equation, we obtained the following:

3 moles oxygen, O2 reacted.

2 moles of Hydrogen sulfide, H2S reacted.

2 moles of water were produced.

2 moles of sulphur dioxide, SO2 were produced.

Explanation:

1. Determination of the coefficients of the equation.

This is illustrated below:

P2O5(s) + H2O(l) <==> H3PO4(aq)

There are 2 atoms of P on the left side and 1 atom on the right side. It can be balance by putting 2 in front of H3PO4 as shown below:

P2O5(s) + H2O(l) <==> 2H3PO4(aq)

There are 2 atoms of H on the left side and 6 atoms on the right side. It can be balance by putting 3 in front of H2O as shown below:

P2O5(s) + 3H2O(l) <==> 2H3PO4(aq)

Now the equation is balanced.

The coefficients are: 1, 3, 2.

2. We'll begin by writing the balanced equation for the reaction. This is given below:

2H2S(g) + 3O2(g) => 2H2O(l) + 2SO2(g)

From the balanced equation above,

3 moles of oxygen, O2 reacted with 2 moles of Hydrogen sulfide, H2S to produce 2 moles of water, H2O and 2 moles of sulphur dioxide, SO2.

Answer:

The reaction will shift leftwards, towards the formation of more cyclohexane at 25 °C

Explanation:

Hello,

In this case, for the given chemical reaction, we can write the law of mass action (equilibrium expression) as shown below:

[tex]Kc=\frac{[CH_3C_5H_9]}{[C_6H_{12} ]}[/tex]

Thus, since Kc < 1, we can conclude there are more moles of cyclohexane at equilibrium (denominator is greater than numerator), therefore, the reaction will shift leftwards, towards the formation of more cyclohexane at 25 °C.

Best regards.

Answer:

CH3CH=NH2+>CH3CH2NH3+

Explanation:

If we look at the both species under review, we will realize that they are both amines hence they possess the polar N-H bond.

Electrons are ordinarily attracted towards the nitrogen atom hence making both compounds acidic. It is worthy of note that certain features of a compound may make it more acidic than another of close structural proximity. 'More acidic' simply means that the proton is more easily lost.

CH3CH=NH2+ contains an sp2 hybridized carbon atom which is highly electronegative and further withdraws electron density from the N-H bond thereby leading to a greater acidity of CH3CH=NH2+ compared to CH3CH2NH3+

Answer:

3.97 L

Explanation:

Data obtained from the question include the following:

Initial volume (V1) = 3.5 L

Initial temperature (T1) = 19 °C

Final temperature (T2) = 58 °C

Final volume (V2) =..?

Next, we shall convert celsius temperature to Kelvin temperature. This can be done as shown below:

Temperature (K) = temperature (°C) + 273

T (K) = T (°C) + 273

Initial temperature (T1) = 19 °C

Initial temperature (T1) = 19 °C + 273 = 292 K

Final temperature (T2) = 58 °C

Final temperature (T2) = 58 °C + 273 = 331 K

Finally, we shall determine the new volume of the gas by using Charles' law equation as shown below:

Initial volume (V1) = 3.5 L

Initial temperature (T1) = 292 K

Final temperature (T2) = 331 K

Final volume (V2) =..?

V1 /T1 = V2 /T2

3.5 /292 = V2 /331

Cross multiply

292 x V2 = 3.5 x 331

Divide both side by 292

V2 = (3.5 x 331) / 292

V2 = 3.97 L

Therefore, the new volume of the gas is 3.97 L.

Answer:

The answer to your question is given below.

Explanation:

Aluminium has atomic number of 13. Thus, the electronic configuration of aluminium can be written as:

Al (13) —› 1s² 2s²2p⁶ 3s²3p¹

The orbital diagram is shown on the attached photo.

Answer: screen shot

Explanation:

Answer:

the enthalpy of the second intermediate equation is halved and has its sign changed.

Explanation:

Let us take a look at the first and second intermediate reactions as well as the overall reaction equation for the process under review;

First reaction;

Ca (s) + CO₂ (g) + ½O₂ (g) → CaCO₃ (s) ΔH₁ = -812.8 kJ

Second reaction;

2Ca (s) + O₂ (g) → 2CaO (s) ΔH₂ = -1269 kJ

Hence the overall equation is now;

CaO (s) + CO₂ (g) → CaCO₃ (s) ΔH = ?

According to the Hess law of constant heat summation, the enthalpy of the overall reaction is supposed to be obtained as a sum of the enthalpy of both reactions but this will not give the enthalpy of the overall reaction in this case. The enthalpy of the overall reaction is rather obtained by halving the enthalpy of the second intermediate reaction and reversing its sign before taking the sum as shown below;

Enthalpy of Intermediate reaction 1 + ½(- Enthalpy of Intermediate reaction 2) = Enthalpy of Overall reaction

Answer:

A.

Explanation:

Did it on Edge.

Answer:

Mass = 26.53 g

Explanation:

Heat of combustion = −1380.0 kJ/mol

This means 1 mol of the compound releases 1380 kJ

Molar mass = 44.53 g/mol

This means 1 mol of the compound has a mass of 44.53 g

How many grams would release 822kJ..?

First, we have to obtain the number of moles

1 mol = 1380

x = 822

x = 0.5957 moles

Moles = Mass / Molar mass

Mass = Molar mass * moles

Mass = 44.53 * 0.5957

Mass = 26.53 g

Answer:

11445.8years

Explanation:

Half-life of carbon-14 = 5720 years

First we have to calculate the rate constant, we use the formula :

Answer:

760 mmHg

Explanation:

Step 1: Given data

Step 2: Calculate the atmospheric pressure

Since air is a gaseous mixture, the atmospheric pressure is equal to the sum of the gases that compose it.

P = pN₂ + pO₂ + pAr + pt = 592 mmHg + 160 mmHg + 7 mmHg + 1 mmHg = 760 mmHg

Answer:

Acid spills should be neutralized with sodium bicarbonate and then cleaned up with a paper towel or sponge.

Explanation:

Answer:

1. 6.92 g of H2O

2i. - 46 KJ of energy.

ii. Option A. Evolved.

Explanation:

1. Determination of the mass of H2O that would be made to react if 110 kJ of energy were provided.

This can be obtained as follow:

The equation for the reaction is given below

2H2O(l) —> 2H2(g) + O2(g) H = 572 kJ

Next, we shall determine the mass of H2O required to produce 572 kJ from the balanced equation.

Molar mass of H2O = (2x1) + 16 = 18 g/mol

Mass of H2O from the balanced equation = 2 x 18 = 36 g

From the balanced equation above, 36 g of H2O reacted to produce 572 kJ of energy.

Finally, we shall determine the mass of water (H2O) needed to produce 110 kJ of energy.

This is illustrated below:

From the balanced equation above, 36 g of H2O reacted to produce 572 kJ of energy.

Therefore, Xg of H2O will react to 110 kJ of energy i.e

Xg of H2O = (36 x 110)/572

Xg of H2O = 6.92 g

Therefore, 6.92 g of H2O is needed to react in order to produce 110 KJ of energy.

2i. Determination of the energy.

The balanced equation for the reaction is given below:

CO(g) + 3H2(g) —> CH4(g) + H2O(g) H = -206 kJ

Next, we shall determine the mass of CO that reacted to produce -206 kJ of energy from the balanced equation.

This is illustrated below:

Molar mass of CO = 12 + 16 = 28 g/mol

Mass of CO from the balanced equation = 1 x 28 = 28 g

From the balanced equation above,

28 g of CO reacted to produce -206 kJ of energy.

Finally, we shall determine the amount of energy produced by reacting 6.27 g of CO. This is illustrated below:

From the balanced equation above,

28 g of CO reacted to produce -206 kJ of energy.

Therefore, 6.27 g of CO will react to produce = (6.27 x -206)/28 = - 46 KJ of energy.

Therefore, - 46 KJ of energy were produced from the reaction.

2ii. Since the energy obtained is negative, it means heat has been given off to the surroundings.

Therefore, the heat is evolved.

Answer:

See explanation

Explanation:

The calculated concentration of the sodium hydroxide is;

Number of moles= mass/molar mass = 1g/40gmol-1 = 0.025 moles

Concentration= number of moles/volume= 0.025×1000/250 = 0.1 M

This calculated concentration will be different from the molarity of NaOH obtained by standardization with acid. The result will not be more accurate if a different acid is used for the standardization this is because sodium hydroxide is deliquescent and absorbs moisture thereby leading to inaccuracy in the calculated molarity.

Any substance that must be used as a primary standard must not absorb moisture, it must be stable and it must be a substance in its pure form.

Answer:

0.60 mol

Explanation:

There is some info missing. I think this is the original question.

Acetylene gas is often used in welding torches because of the very high heat produced when it reacts with oxygen gas, producing carbon dioxide gas and water vapor. Calculate the moles of oxygen needed to produce 1.5 mol of water.

Step 1: Given data

Moles of water required: 1.5 mol

Step 2: Write the balanced equation

C₂H₂(g) + 2.5 O₂(g) ⇒ 2 CO₂(g) + H₂O(g)

Step 3: Calculate the moles of oxygen needed to produce 1.5 mol of water

The molar ratio of O₂ to H₂O is 2.5:1. The moles of oxygen needed to produce 1.5 mol of water are (1/2.5) × 1.5 mol = 0.60 mol

Answer:

0.312g

Explanation:

From Avogadro's hypothesis, 1mole of any substance contains 6.02x10^23 molecules. This means that 1mole of sulphur also contains 6.02x10^23 molecules

1mole of sulphur = 32g

If 1 mole(i.e 32g) of sulphur contains 6.02x10^23 molecules

Then, Xg of sulphur will contain 5.87x10^21 molecules i.e

Xg of sulphur = (32x5.87x10^21)/6.02x10^23 = 0.312g

just saying this is not my work, thank Eduard22sly

he answered it on a different page

so give him credit

here is the link

https://brainly.com/question/14966520

Answer:

The correct answer is d. Sn(s) | Sn²⁺(aq) ∥ H⁺(aq) | H₂(g) | Pt

Explanation:

The half reactions are:

2H⁺(aq) + 2 e- ⟶ H₂(g) (reduction)

Sn(s) ⟶ Sn²⁺(aq) + 2 e-  (oxidation)

In the cell notation, there are two electrodes in which are separated the reduction reaction from the oxidation reaction. In the left electrode occurs the oxidation reaction (anode) while in the right electrode occurs the reduction reaction (cathode). The general form of the cell notation is the following:

anode reaction∥ cathode reaction

where the two bars ( ∥ ) represent the physical barrier between the electrodes. A single bar ( | ) is used to represent a phase separation.  

In this redox reaction, the half reaction of the anode is Sn(s) ⟶ Sn²⁺(aq) + 2 e-; whereas the half reaction of the cathode is 2H⁺(aq) + 2 e- ⟶ H₂(g).

The componens are written in order according to the half reaction. Since Sn²⁺ and H⁺ ions are in solution, a platinum electrode is used and represented as Pt. Thus, the cell notation is:

Sn(s) | Sn²⁺(aq) ∥ H⁺(aq) | H₂(g) | Pt

The name of the molecule which is given below is 2-pentene.

Alkenes are the organic compounds which are composed of carbon and hydrogen atoms, in which double bond is present.

In the given diagram:

So the compound is 2 pentene.

Hence, 2 pentene is the name of the compound.

To know more about alkene, visit the below link:
https://brainly.com/question/6041165

#SPJ2

Answer:

pH of the buffer is 7.48

Explanation:

The H₂PO₄⁻/HPO₄²⁻ buffer has a pKa of 7.21. You can find pH of this buffer following H-H equation:

pH = pKa + log [A⁻] / [HA]

pH = 7.21 + log [HPO₄²⁻] / [ H₂PO₄⁻]

Where [] represents molarity of each specie of the buffer and, as volume is 1.00L, also represents its moles.

Thus, to find pH of the buffer we need to calculate moles of each specie, thus

Moles of 18.0g of KH₂PO₄(Molar mass: 136.086g/mol) = moles of H₂PO₄⁻ are:

18.0g KH₂PO₄ ₓ (1mol / 136.086g) = 0.132 moles of KH₂PO₄= H₂PO₄⁻

Moles of 35.0g of Na₂HPO₄(Molar mass: 141.96g/mol) = moles of HPO₄²⁻ are:

35.0g Na₂HPO₄ ₓ (1mol / 141.96g) = 0.2465 moles of Na₂HPO₄= HPO₄²⁻

Replacing in H-H equation:

pH = 7.21 + log [HPO₄²⁻] / [ H₂PO₄⁻]

pH = 7.21 + log [0.2465] / [0.132]

pH = 7.48

Answer:

In the other of increasing wavelength we arrange as

X-rays

ultraviolet

green light

red light

infrared

radio waves

Explanation:

In the electromagnetic spectrum, wavelength decreases with increase in the energy of the electromagnetic wave. Since the e-m wave spectrum is arranged in the order of increasing energy (decreasing wavelength) as: Radio wave; infrared; visible light; ultraviolet; x-rays; gamma rays. Within the visible light, the green light has more energy than the red light. Therefore, the arrangement should be in the reverse direction of their increasing energy.

Answer:

A.∆s>0contribute to spontaneity.

Answer:

b, H2SO4 with HCl, as they are both liquid acids

Answer:

1) 3-Ethylanisole

2) 2,3-Dibromobenzoic acid

3) 3-Fluorotoluene

Explanation:

Let us try to look at the structures of each compound one after the other as described in the question.

1) A ring with six vertices and alternating double and single bonds must refer to a benzene ring. A benzene ring having -OCH3 attached to the first vertex is called anisole. If a -CH2CH3 group is now attached at position 3, we now name the compound 3-Ethylanisole.

2) A ring with six vertices and alternating single and double bonds is a benzene ring. If the ring has -COOH attached to the first vertex, we call it benzoic acid. If bromine atoms are attached to the second and third vertices respectively, the compound is now named 2,3-Dibromobenzoic acid.

3) A ring with alternating single and double bonds is a benzene ring. If a -CH3 group is attached to the first vertex, we call the compound toluene. If a fluorine atom is now attached to position 3, the compound can now be named 3-Fluorotoluene

Answer:

28.13 g of H2O.

Explanation:

We'll begin by writing the balanced equation for the reaction. This is illustrated below:

N2O4(l) + 2N2H4 (l) → 3N2(g) + 4H2O(g)

Next, we shall determine the masses of N2O4 and N2H4 that reacted and the mass of H2O produced from the balanced equation.

This is illustrated below:

Molar mass of N2O4 = (14x2) + (16x4) = 92 g/mol

Mass of N2O4 from the balanced equation = 1 x 92 = 92g

Molar mass of N2H4 = (14x2) + (4x1) = 32 g/mol

Mass of N2H4 from the balanced equation = 2 x 32 = 64 g

Molar mass of H2O = (2x1) + 16 = 18 g/mol

Mass of H2O from the balanced equation = 4 x 18 = 72 g

Summary:

From the balanced equation above,

92 g of N2O4 reacted with 64 g of N2H4 to produce 72 g of H2O.

Next, we shall determine the limiting reactant.

This can be obtained as follow:

From the balanced equation above,

92 g of N2O4 reacted with 64 g of N2H4.

Therefore, 40 g of N2O4 will react with = (40 x 64)/92 = 27.83 g of N2H4.

From the calculations made above, we can see that it will take a higher mass i.e 27.83 g than what was given i.e 25 g of N2H4 to react completely with 40 g of N2O4.

Therefore, N2H4 is the limiting reactant and N2O4 is the excess reactant.

Finally, we shall determine the mass of H2O produced from the reaction of 40.0 g of N2O4 and 25.0 g of N2H4.

In this case the limiting reactant will be used because it will produce the maximum amount of H2O as all of it is consumed in the reaction.

The limiting reactant is N2H4 and the mass of H2O produced can be obtained as follow:

From the balanced equation above,

64 g of N2H4 reacted to produce 72 g of H2O.

Therefore, 25 g of N2H4 will react to produce = (25 x 72)/64 = 28.13 g of H2O.

Therefore, 28.13 g of H2O were obtained from the reaction.

Answer:

2.81mL

Explanation:

Based on the reaction:

C₆H₃COCl + 2NH₃ → C₆H₅CONH₂ + NH₄Cl

Benzoyl chloride + ammonia → Benzamide

1 mole of benzoyl chloride in excess of ammonia produce 1 mole of Benzamide.

Thus, assuming a theoretical yield, to produce 24.1mmoles of benzamide you require 24.1mmoles of benzoyl chloride.

As molar mass of benzoyl chloride is 141g/mol, mg you require are:

mg Benzoyl chloride: 24.1mmol × (141mg / 1mmol) = 3398.1mg = 3.3981g of benzoyl chloride.

to convert this mass to mL, you require density of Benzoyl chloride (1.21g/mL). Thus, mL you need are:

3.3981g × (1mL / 1.21g) =

Answer:

Poop Buttt.

Explanation:

The given question is incomplete, the complete question is:

A chemistry student weighs out 0.0349g of formic acid HCHO2 into a 250.mL volumetric flask and dilutes to the mark with distilled water. He plans to titrate the acid with 0.1500M NaOH solution. Calculate the volume of NaOH solution the student will need to add to reach the equivalence point. Round your answer to 3 significant digits.

Answer:

The correct answer is 5.06 ml.

Explanation:

Based on the given information, the weight of formic acid given is 0.0349 grams. The volume of formic acid of V1 given is 250 ml. The molecular mass of formic acid is 46 grams per mole. Now the molarity of formic acid will be,  

[HCOOH] = weight * 1000 / molecular mass * volume (ml)

= 0.0349 * 1000 / 46 * 250

= 0.003035 M or M1

The molarity of NaOH given is 0.1500 M or M2

Let us assume that the volume needed to attain equivalence point is V2 ml.  The volume V2 can be determined by using the dilution equation,  

M1V1 = M2V2

V2 = M1V1/M2  

V2 = 0.003035 * 250 / 0.1500

V2 = 5.06 ml.  

Hence, the volume of NaOH needed is 5.06 ml.  

Answer:

1120.62 kJ

Explanation:

In order to find how much heat is released for 7.70 mol, we have to compare it with the heat released from one mole.

So from the question, we have;

196.6 kJ = 1 mol

x = 5.70

x = 5.70 * 196.6 / 1

x = 1120.62 kJ

Answer:

Question 1

A. Empirical formula is C8H8O3

B. Molecular formula is C8H8O3

Question 2.

A. Empirical formula is CH2

B. Molecular formula is C4H8

Explanation:

Question 1:

A. Determination of the empirical formula:

Carbon (C) = 63.2%

Hydrogen (H) = 5.26%

Oxygen (O) = 31.6%

Divide by their molar mass

C = 63.2/12 = 5.27

H = 5.26/1 = 5.26

O = 31.6/16 = 1.975

Divide by the smallest

C = 5.27/1.975 = 2.7

H = 5.26/1.975 = 2.7

O = 1.975/1.975 = 1

Multiply through by 3 to express in whole number

C = 2.7 x 3 = 8

H = 2.7 x 3 = 8

O = 1 x 3 = 3

Therefore, the empirical formula for the compound is C8H8O3

B. Determination of the molecular formula of the compound.

From Avogadro's hypothesis, 1 mole of any substance contains 6.02×10²³ molecules.

Now from the question given, we were told that 1 molecule of the compound has a mass of 2.53×10¯²² g.

Therefore, 6.02×10²³ molecules will have a mass of = 6.02×10²³ x 2.53×10¯²² = 152.306 g

Therefore, 1 mole of the compound = 152.306 g

The molecular formula of the compound can be obtained as follow:

[C8H8O3]n = 152.306

[(12x8) + (1x8) + (16x3)]n = 152.306

[(96 + 8 + 48 ]n = 152.306

152n = 152.306

Divide both side by 152

n = 152.306/152

n = 1

The molecular formula => [C8H8O3]n

=> [C8H8O3]1

=> C8H8O3

Question 2:

A. Determination of the empirical formula of the compound.

Mass sample of compound = 0.648 g

Carbon (C) = 0.556 g

Mass of Hydrogen (H) = mass sample of compound – mass of carbon

Mass of Hydrogen (H) = 0.648 – 0.556

Mass of Hydrogen (H) = 0.092 g

Thus, the empirical formula can be obtained as follow:

C = 0.556 g

H = 0.092 g

Divide by their molar mass

C = 0.556/12 = 0.046

H = 0.092/1 = 0.092

Divide by the smallest

C = 0.046/0.046 = 1

H = 0.092/0.046 = 2

Therefore, the empirical formula of the compound is CH2.

B. Determination of the molecular formula of the compound.

Mole of compound = 0.5 mole

Mass of compound = 28.5 g

Molar mass of compound =.?

Mole = mass /Molar mass

0.5 = 28.5/ Molar mass

Cross multiply

0.5 x molar mass = 28.5

Divide both side by 0.5

Molar mass = 28.5/0.5 = 57 g/mol

Thus, the molecular formula of compound can be obtained as follow:

[CH2]n = 57

[12 + (1x2)]n = 57

14n = 57

Divide both side by 14

n = 57/14

n = 4

Molecular formula => [CH2]n

=> [CH2]4

=> C4H8.

Answer:

Salt solution may be calculated by measuring the specific gravity of a sample of water using a hydrometer.

Hope this answer correct (^^)....