Content attribution
QUESTION 2 • 1 POINT
Which anion would bond with K+ in a 1: 1 ratio to form a neutral ionic compound?​

Answer:

1.3 mL

Explanation:

First, get the density of the olive oil, which is 0.917 kg/mL. Then divide the mass by the density:

1.2kg/0.917kg/mL= 1.3086150491 mL. The kg cancel out, leaving us with mL.

It should have 2 significant figures, because 1.2kg has 2 and we are dividing.

The volume of olive oil will be nearly 1300mL or 1.30 L as per the given data.

Volume is a measurement of three-dimensional space that is occupied. It is frequently numerically quantified using SI derived units or various imperial units. The definition of length is linked to the definition of volume.

Volume is, at its most basic, a measure of space. The units liters (L) and milliliters (mL) are used to measure the volume of a liquid, also known as capacity.

This measurement is done with graduated cylinders, beakers, and Erlenmeyer flasks.

Here, it is given that mass of olive oil is 1.2kg.

We know that,

Density of olive oil = 0.917kg/l.

Volume = mass/density

Volume = 1.2/0.917.

Volume = 1.30 lit.

Volume = 1300mL.

Thus, the volume of olive oil will be 1300 mL.

For more details regarding volume, visit:

https://brainly.com/question/1578538

#SPJ2

Explanation:

This reaction is in equilibrium and would hence obey lechatelier's principle. This principle states that whenever a system at equilibrium undergoes a change, it would react in way so as to annul that change.

Since it is an endothermic reaction, increasing the temperature would cause the reaction to shift towards the right.

This means that it favours product formation and more of the product would be formed.

Answer:

DE2

Explanation: for every one D+2 you need two E-1 because +2=-2

Answer:

Explanation:

a ) Benzoic acid is formed . In any alkyl benzene derivative , potassium permanganate reacts to form carboxylic acid . It oxidises side chains to carboxylic acid .  

C₆H₅CH₃ + 0 = C₆H₅COOH + H₂O

O is provided by KMnO₄

b ) In this reaction isophthalic acid is formed .

C₆H₄(CH₃)₂ +O = C₆H₄(COOH)₂

c)

4-Propyl-3-t-butyltoluene

In this oxidation , three side chains of ring  are 1 ) 1-methyl 2 ) 3- butyl 3 ) 4 propyl .

The methyl and 4 - propyl groups are oxidised to di- carboxylic acid and 3 butyl group remains intact ( unoxidised )

Answer:

- Pressure in St. Paul, Minnesota

- Temperature in St. Paul, Minnesota

Explanation:

22.4 L or dm³ is the volume for a gas under Standard pressure and temperature conditions.

It is logically to say, that tempereature value at the day of the experiment was not 273.15 K, which is 32°F

We can say, that the pressure was not 1 atm. St Paul Minnesota has  a minimum, but a little height, so the pressure differs by few figures from the standard pressure values.

We also have to mention, that 22.4 L is the value for the Ideal gases at standards conditions. Ideal gases does not exisist on practice, we always talk about real gases. Don't forget the Ideal Gases Law equation:

P . V = n . R . T

Pressure . Volume = number of moles . 0.082 L.atm /mol. K  . 273.15K

Number of moles must be 1 at STP, to determine a volume of 22.4L

Answer and Explanation:

Given the following chemical equation:

Cl₂(g) + F₂(g) ⇒ 2ClF(g)

The coefficients are: 1 for Cl₂, 1 for F₂ and 2 for ClF. The coefficients indicate the number of units of each ompound that participates in the reaction. It gives the proportion of reactants and products in the reaction. These units can be molecules or moles. In this reaction, we can say:

On the particulate level: 1 molecule of Cl₂(g) reacts with 1 molecule of F₂(g) to form 2 molecules of ClF(g).

On the molar level: 1 mol of Cl₂(g) reacts with 1 mol of F₂(g) to form 2 mol of ClF(g).

Answer:

Bleaching Powder's chemical formula is CaOCl2 and is called Calcium Oxychloride. It is prepared on dry slaked lime by chlorine gas. 2. ... It gives calcium chloride, chlorine and water when bleaching powder reacts with hydrochloric acid.

Explanation:

Answer:

Your answer will either be 22.9897 or 22.990 !!

Explanation:

Answer:

Approximately [tex]1.854\; \rm mol\cdot L^{-1}[/tex].

Explanation:

Note that both figures in the question come with four significant figures. Therefore, the answer should also be rounded to four significant figures. Intermediate results should have more significant figures than that.

Look up the relative atomic mass of [tex]\rm Sr[/tex], [tex]\rm O[/tex], and [tex]\rm H[/tex] on a modern periodic table. Keep at least four significant figures in each of these atomic mass data.

Calculate the formula mass of [tex]\rm Sr(OH)_2[/tex]:

[tex]M\left(\rm Sr(OH)_2\right) = 87.62 + 2\times (15.999 + 1.008) = 121.634\; \rm g \cdot mol^{-1}[/tex].

[tex]M\left(\rm Sr(OH)_2\right) =121.634\; \rm g \cdot mol^{-1}[/tex] means that each mole of [tex]\rm Sr(OH)_2[/tex] formula units have a mass of [tex]121.634\; \rm g[/tex].

The question states that there are [tex]10.60\; \rm g[/tex] of [tex]\rm Sr(OH)_2[/tex] in this solution.

How many moles of [tex]\rm Sr(OH)_2[/tex] formula units would that be?

[tex]\begin{aligned}n\left(\rm Sr(OH)_2\right) &= \frac{m\left(\rm Sr(OH)_2\right)}{M\left(\rm Sr(OH)_2\right)}\\ &= \frac{10.60\; \rm g}{121.634\; \rm g \cdot mol^{-1}} \approx 8.71467\times 10^{-2}\; \rm mol\end{aligned}[/tex].

There are [tex]8.71467\times 10^{-2}\; \rm mol[/tex] of [tex]\rm Sr(OH)_2[/tex] formula units in this [tex]47\; \rm mL[/tex] solution. Convert the unit of volume to liter:

[tex]V = 47\; \rm mL = 0.047\; \rm L[/tex].

The molarity of a solution measures its molar concentration. For this solution:

[tex]\begin{aligned}c\left(\rm Sr(OH)_2\right) &= \frac{n\left(\rm Sr(OH)_2\right)}{V}\\ &= \frac{8.71467\times 10^{-2}\; \rm mol}{0.047\; \rm L} \approx 1.854\; \rm mol \cdot L^{-1}\end{aligned}[/tex].

(Rounded to four significant figures.)

Answer:

Cd2+ : 1s2 2s2 2p6 3s2 3p6 4s2 3d10 4p6 4d10 or [Kr] 4d¹⁰

Explanation:

Before proceeding to write out the electron configuration of Cd2+, we have to obtain the electron configuration of Cadmium (Cd),

Cadmium has an atomic number of 48, this means that a neutral cadmium atom will have a total of  48  electrons surrounding its nucleus.

The electronic configuration of Cadmium is;

Cd: 1s2 2s2 2p6 3s2 3p6 4s2 3d10 4p6 5s2 4d10

The shorthand notation is given as;

Cd: [Kr] 4d¹⁰5s²

Cd2+ means that it has two less electrons, hence it's electron configuration is given as;

Cd2+ : 1s2 2s2 2p6 3s2 3p6 4s2 3d10 4p6 4d10 or [Kr] 4d¹⁰

Answer:

Water

Explanation:

Solid potassium hydrogen tartrates (KHT) is soluble in water. This is especially at room temperature.

The solvent for KHT is water.

Answer:

A. Electron clouds or energy levels

Explanation:

Electrons can exist in two states:

Electrons can exist in an electron cloud or energy level. Electron in an atoms have ability to change energy levels either by emitting or absorbing a photon that form the energy equal to the energy difference between the two levels.

Hence, the correct answer is A.

Answer:

Up and DOWN spin

Explanation:

Answer:

The Lewis structure is attached with the answer -

Explanation:

Lewis structure or Lewis dot diagram are diagrams or representation of showing the bonding between different or same atoms of a molecule in any and also shows lone pairs of electrons that may exist in the molecule as dots.

HBrO₄ is bromine oxoacid which is also known as perbromic acid. It is a unstable inorganic compound.

The Lewis structure is attached in form of image with representation of lone pairs of electrons.

Answer:

6

Explanation:

Alkanes undergo substitution reaction so the number of replacement reaction hydrogen is 6

Answer:

T2 = 500K

Explanation:

Given data:

P1 = 1atm

V1 = 300ml

T1= 27 + 273 = 300K

T2 = ?

V2 = 1.00ml

P2 = 500atm

Apply combined law:

P1xV1//T1 = P2xV2/T2 ...eq1

Substituting values into eq1:

1 x 300/300 = 500 x 1/T2

Solve for T2:

300T2 = 500 x 300

300T2 = 150000

Divide both sides by the coefficient of T2:

300T2/300 = 150000/300

T2 = 500K

Answer:

3 fluorine atoms will be present

Answer:

3

Explanation:

The chemical formula of aluminum fluoride is AlF3. As you can see, there is a 1:3 ratio of aluminum atoms to fluorine atoms. Therefore, if a molecule of AlF3 has one aluminum atom, you know there must be 3 fluorine atoms present.

If you want further tutoring help in chemistry or other subjects for FREE, check out growthinyouth.org.

Answer:

1,4-hexanediamine contains two [tex]-NH_{2}[/tex] functional groups.

Explanation:

1,4-hexanediamine is an organic molecule which contains two [tex]-NH_{2}[/tex] functional groups at C-1 and C-4 position.

The longest carbon chain in 1,4-hexanediamine contains six carbon atoms.

Molecular formula of 1,4-hexanediamine is [tex]C_{6}H_{16}N_{2}[/tex].

1,4-hexanediamine used as a bidentate ligand in organometallic chemistry.

The structure of 1,4-hexanediamine is shown below.

Answer:

c iodine

Explanation:

fluorine is a halogen group element like Bromine, Iodine,Astatine,Chloride

Answer:

2NaOH(s) → Na₂O(s) + H₂O(g)

Hope that helps.

Answer:

Molarity of the sulfuric acid solution is 4.61M

Explanation:

The neutralization of a base of OH⁻ with sulfuric acid, H₂SO₄, occurs as follows:

2 OH⁻ + H₂SO₄ → 2H₂O + SO₄²⁻

That means, 2 moles of base react with 1 mole of sulfuric acid.

If you add 0.400 moles of OH⁻, moles of sulfuric acid you need to neutralize this amount of OH⁻ are:

0.400 moles OH⁻ ₓ (1 mole H₂SO₄ / 2 moles OH⁻) = 0.200 moles of H₂SO₄

As you add 43.4mL = 0.0434L of sulfuric acid to neutralize this solution, molarity (Ratio between moles and liters) is:

0.200 moles H₂SO₄ / 0.0434L = 4.61M

Answer:

The process of slowly adding one solution to another until the reaction between the two is complete.

Explanation:

When you perform a titration, you are slowly adding one solution of a known concentration called a titrant to a known volume of another solution of an unknown concentration until the reaction reaches neutralization, in which the reaction is no longer taking place. This is often indicated by a color change.

Hope that helps.

Answer:

C

Explanation:

Turning liquid to a solid is like freezing water to ice and requires the water to LOSE (release) heat causing an exothermic reaction.

Answer:

(a) The diode voltage,  [tex]V_D =[/tex]  0.776 V

(b) The diode current, [tex]I_D =[/tex] 3.81 x 10⁻²⁰ A

Explanation:

Given;

saturation current in diode, [tex]I_s[/tex] = 10⁻¹⁷ A

nonideality factor, n = 1.05

(a) the diode voltage

Given diode current, [tex]I_D[/tex] = 70 μA = 7 x 10⁻⁶ A

Diode voltage is calculated as;

[tex]V_D = nV_Tln(1+ \frac{I_D}{I_S} )[/tex]

Where;

[tex]V_T[/tex] is thermal voltage at 25°C = 0.025

[tex]V_D = 1.05 * 0.025 ln(1+ \frac{70*10^{-6}}{1*10^{-17}})\\\\V_D = 0.02625ln(1+ 7*10^{12})\\\\V_D = 0.776 \ V[/tex]

b) the diode current for VD = 0.1 mV

[tex]V_D = nV_Tln(1 +\frac{I_D}{I_S} )\\\\ln(1 +\frac{I_D}{I_S} ) = \frac{V_D}{nV_T} \\\\ln(1 +\frac{I_D}{I_S} ) = \frac{0.1*10^{-3}}{1.05*0.025} \\\\ln(1 +\frac{I_D}{I_S} ) = 0.00381\\\\1 +\frac{I_D}{I_S} = e^{0.00381}\\\\1+ \frac{I_D}{I_S}= 1.00381\\\\ \frac{I_D}{I_S}=1.00381 - 1\\\\ \frac{I_D}{I_S}= 0.00381\\\\I_D = 0.00381(I_S)\\\\I_D = 0.00381(10^{-17})\\\\I_D = 3.81*10^{-20} \ A[/tex]

Answer:

[tex]\boxed{\text{Q1. 3.6 g; Q2. 0.2 A}}[/tex]

Explanation:

Q1. Mass of Cu

(a) Write the equation for the half-reaction.

Cu²⁺ + 2e⁻ ⟶ Cu

The number of electrons transferred (z) is 2 mol per mole of Cu.

(b) Calculate the number of coulombs

q  = It  

[tex]\text{t} = \text{1.0 h} \times \dfrac{\text{3600 s}}{\text{1 h}} = \text{3600 s}\\\\q = \text{3 C/s} \times \text{ 3600 s} = \textbf{10 800 C}[/tex]

(c) Mass of Cu

We can summarize Faraday's laws of electrolysis as

[tex]\begin{array}{rcl}m &=& \dfrac{qM}{zF}\\\\& = &\dfrac{10 800 \times 63.55}{2 \times 96 485}\\\\& = & \textbf{3.6 g}\\\end{array}\\\text{The mass of Cu produced is $\boxed{\textbf{3.6 g}}$}[/tex]

Note: The answer can have only two significant figures because that is all you gave for the time.

Q2. Current used

(a) Write the equation for the half-reaction.

Ag⁺ + e⁻ ⟶ Ag

The number of electrons transferred (z) is 1 mol per mole of Ag.  

(a) Calculate q

[tex]\begin{array}{rcl}m &=& \dfrac{qM}{zF}\\\\2.00& = &\dfrac{q \times 107.87}{1 \times 96 485}\\\\q &=& \dfrac{2.00 \times 96485}{107.87}\\\\& = & \textbf{1789 C}\\\end{array}[/tex]

(b) Calculate the current

t = 3 h = 3 × 3600 s = 10 800 s

[tex]\begin{array}{rcl}q&=& It\\1789 & = & I \times 10800\\I & = & \dfrac{1789}{10800}\\\\& = & \textbf{0.2 A}\\\end{array}\\\text{The current used was $\large \boxed{\textbf{0.2 A}}$}[/tex]

Note: The answer can have only one significant figure because that is all you gave for the time.

Answer:

3.00 L

Explanation:

Convert the pressure to Pascals.

P = 82 atm × (101325 Pa/atm)

P = 8,308,650 Pa

Convert temperature to Kelvins.

T = 27°C + 273

T = 300 K

Use ideal gas law:

PV = nRT

(8,308,650 Pa) V = (10 mol) (8.314 J/mol/K) (300 K)

V = 0.00300 m³

If desired, convert to liters.

V = (0.00300 m³) (1000 L/m³)

V = 3.00 L

Answer:

[tex]\large \boxed{\text{3.0 L}}[/tex]

Explanation:

[tex]\begin{array}{rcl}pV &=& nRT\\\text{82 atm} \times V & = & \text{10 mol} \times \text{0.082 06 L}\cdot\text{atm}\cdot\text{K}^{-1}\text{mol}^{-1} \times \text{300.15 K}\\82V & = & \text{246 L}\\V & = & \textbf{3.0 L} \\\end{array}\\\text{The volume of the balloon is $\large \boxed{\textbf{3.0 L}}$}[/tex]

Answer:

El volumen del gas era 12.95 L

Explanation:

Se relaciona la presión y el volumen mediante la ley de Boyle, que dice:

“El volumen ocupado por una determinada masa gaseosa a temperatura constante, es inversamente proporcional a la presión”

La ley de Boyle se expresa matemáticamente como:  P*V=k

Por otro lado, la Ley de Charles consiste en la relación que existe entre el volumen y la temperatura absoluta de una cierta cantidad de gas ideal, el cual se mantiene a una presión constante. Esta ley dice que cuando la cantidad de gas y de presión se mantienen constantes, el cociente que existe entre el volumen y la temperatura siempre tendrán el mismo valor:  

[tex]\frac{V}{T}=k[/tex]

Por último, la Ley de Gay Lussac dice que la temperatura absoluta y la presión son directamente proporcionales. Es decir, cuando se mantiene todo lo demás constante, mientras suba la temperatura de un gas subirá también su presión. Y mientras la temperatura del gas baje, lo mismo ocurrirá con la presión:

[tex]\frac{P}{T}=k[/tex]

Combinado las mencionadas tres leyes se obtiene:

[tex]\frac{P*V}{T} =k[/tex]

Cuando se desean estudiar dos diferentes estados, uno inicial y una final de un gas, se puede aplicar:

[tex]\frac{P1*V1}{T1} =\frac{P2*V2}{T2}[/tex]

Recordando que la temperatura debe usarse en grados Kelvin, conoces los siguientes datos:

Reemplazando:

[tex]\frac{750 torr*8.5 L}{293K} =\frac{425 torr*V2}{253 K}[/tex]

Resolviendo:

[tex]V2=\frac{750 torr*8.5 L}{293K} *\frac{253 K}{425 torr}[/tex]

V2= 12.95 L

El volumen del gas era 12.95 L

Answer:

171 mL of HCl

Explanation:

The first thing we want to do is consider the reaction between Al(OH)3 and water - as that is the expected reaction that is taking place,

Al(OH)3 + 3HCl → AlCl3 + 3H2O

Knowing this, let's identify the mass of Al(OH)3. Aluminum = 27 g / mol, Oxygen( 3 ) = 16 [tex]*[/tex] 3 = 48, Hydrogen ( 3 ) = 1 [tex]*[/tex] 3 = 3 - 27 + 48 + 3 = 78 g / mol. This value is approximated however ( 78 g / mol ), as the molar mass of each substance is rounded as well. Another key thing we need to do here is to convert 340 mg → grams, considering that that unit is a necessity with respect to moles, as you might know - 340 mg = 0.340 g.

Now we can calculate how much moles of HCl will be present in solution, provided we have sufficient information for that,

(0.340 g Al(OH)3) / (78.0036 g / mol Al(OH)3) [tex]*[/tex] (3 mol HCl / 1 mol Al(OH)3)

⇒ (.004358773185 g^2 / mol Al(OH)3) [tex]*[/tex] (3 HCl / Al(OH)3 )

⇒ .01307632 mol HCl

We can apply this same concept on the reaction of Mg(OH)2 and water, receiving the number of moles of HCl when that takes place. Then we can add the two ( moles of HCl ) and divide by the value " 0.18 mol / L " given to us.

" Mg(OH)2 + 2HCl → MgCl2 + 2H2O "

Molar mass of Mg(OH)2 = 58.3197 g / mol,

516 mg = 0.516 g

(0.516 g Mg(OH)2) / (58.3197 g / mol Mg(OH)2) [tex]*[/tex] (2 mol HCl / 1 mol Mg(OH)2)

= .017695564 mol HCL

___________

( .01307632 + .017695564 ) / ( 0.18 M HCl )

= 0.170954911 L

= 171 mL of HCl

Answer:

A) Chlorine (Cl)

B) Cobalt (Co)

C) Caesium (Cs)

Hope this helps.

The abbreviated electron configurations that was given in the question belongs to

Chlorine (Cl)

Cobalt (Co)

Caesium (Cs) respectively.

Therefore, electron configurations  explain orbitals of an atom when it is in it's ground state.

Learn more at:https://brainly.com/question/21940070?referrer=searchResults

Answer:

Approximately 100 °C.

Explanation:

Hello,

In this case, since the entropy of vaporization is computed in terms of the heat of vaporization and the temperature as:

[tex]\Delta S_{vap}=\frac{\Delta H_{vap}}{T}[/tex]

We can solve for the temperature as follows:

[tex]T=\frac{\Delta H_{vap}}{\Delta S_{vap}}[/tex]

Thus, with the proper units, we obtain:

[tex]T=\frac{55500J/mol}{148J/(mol*K)} =375K\\\\T=102 \°C[/tex]

Hence, answer is approximately 100 °C.

Best regards.

Answer:

Kc = [H₂CO₃] / [CO₂]

Explanation:

Equilibrium constant expression (Kc) of any reaction is defined as the ratio between molar concentrations in equilibrium of products over reactants.

Pure solids and liquids don't affect the equilibrium and you don't have to take its concentrations in the equilibrium.

Also, each specie must be powered to its reactant coefficient.

For example, for the reaction:

aA(s) + bB(aq) ⇄ cC(l) + nD(g) + xE(aq)

The equilibrium constant, kc is:

Kc = [D]ⁿ / [B]ᵇ[E]ˣ

You don't take A nor C species because are pure solids and liquids. b, n and x are the reactant coefficients of each substance. Ratio of products over reactants

Thus, for the reaction:

CO₂(aq) + H₂O(l) ⇄ H₂CO₃(aq)

The Kc is: